Rojuna 2-Pack 3D Replacement Joystick Analog Thumb Stick for Nintendo Switch Lite and Joycon
Asin: B08799GCM4 | Ean: 0738629361911 | UPC: 738629361911
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Package Include: 2 X Replacement Joystick For Nintendo Switch Lite And Joycon.
Note: Please Calibrate The Joystick Using Nintendo Switch Setting After Install.
Replaces Your Broken, Worn-Out Or Damaged Analog, Bring Your Controller Back To Life.
Features
- New Joystick 3D analog for Nintendo Switch Joycon and Switch Lite; Works for Left or Right joycon controller
- Replaces your broken, worn-out or damaged analog, bring your controller back to life
- Package include: 2 x Replacement Joystick for Nintendo Switch Lite and JoyCon
- NOTE: please calibrate the joystick using Nintendo Switch setting after install
- See more on Amazon...
Brand: Rojuna | Manufacturer: Rojuna
See On Amazon Similar To Rojuna 2Pack 3D Replacement Joystick
#1
3D Replacement Joystick Analog, Thumb Stick for Nintendo Switch, 2-Pack Analog Joystick Replacement with 2pcs Thumb Stick Caps & Screws (Black)
Asin: B08397JQZG | Ean: 0788125671243 | UPC: 788125671243
Extra Accessories -- Additional 2 Thumbstick Caps, 2 "Y" Screws, 2 "+" Screws Make Your Works More Convenient. Avoid Worrying About The Loss Of Accessories When Replacing The Joy-Con..
Satisfaction Guarantee -- We Provide ★30 Days Free Return & Replacement. If You Have Any Question About The Analog Joystick Replacement, Please Feel Free To Contact Us. We Will Reply You Within 24 Hours..
What's Included -- 2*Analog Joystick Replacements, 2*Thumb Stick Caps, 2* "Y" Screws, 2* "+" Screws..
Upgraded Quality -- Made Of Compact Material, The New Version Of Oroginal Analog Joystick Replacements Are Wear-Resistant. Build To Long Use..
Features
- Enjoy your Joy Con on a Budget -- Design for replacing your broken, worn-out or damaged Joy-Con Joystick. No longer do you need to spent $70 on a new Joy Con controller. Now you can replace your broken analog joystick replacements at an affordable price.
- Upgraded Quality -- Made of compact material, the new version of oroginal analog joystick replacements are wear-resistant. Build to long use.
- Extra Accessories -- Additional 2 thumbstick caps, 2 Y screws, 2 + screws make your works more convenient. Avoid worrying about the loss of accessories when replacing the joy-con.
- What's Included -- 2*analog joystick replacements, 2*thumb stick caps, 2* Y screws, 2* + screws.
- Satisfaction Guarantee -- We provide 30 DAYS FREE RETURN & REPLACEMENT. If you have any question about the analog joystick replacement, please feel free to contact us. We will reply you within 24 hours.
- See more on Amazon...
Brand: JAOYSTII | Manufacturer: Starko
Dimensions: 0.30 x 0.85 x 0.85 Inches
See On Amazon #2
EEEKit 3D 6-Pack Replacement Analog Stick Joystick for PS4 Dualshock 4 Xbox One Controller Xbox Elite Controller
Asin: B07JD7CGMT
Fix Drift: Our Ps4 Controller Parts Can Fix The Drift On Xbox One Controllers To Make Your Controller Work Normally Again..
After-Sales Service: If You Are Not Satisfied With Our Products Or Have Quality Problems, Please Contact Us And We Guarantee Free Replacement Or A Full Refund Promptly..
Durable Material: High Quality Guaranteed, 3D Controller Joystick Axis Analog Sensor Module..
Good Replacement: The Ps4 Joystick Replacement Is A Good Replacement For Your Damaged Or Non-Working 3D Joystick Axis Analog Sensor Module..
Features
- COMPATIBLE DEVICES: Compatible with PS4 Controller, Xbox One Controller and Xbox Elite Wireless Controller.
- GOOD REPLACEMENT: The ps4 joystick replacement is a good replacement for your damaged or non-working 3D Joystick Axis Analog Sensor Module.
- FIX DRIFT: Our ps4 controller parts can fix the drift on Xbox One controllers to make your controller work normally again.
- DURABLE MATERIAL: High quality guaranteed, 3D controller joystick axis analog sensor module.
- AFTER-SALES SERVICE: If you are not satisfied with our products or have quality problems, please contact us and we guarantee Free Replacement or a Full Refund promptly.
- See more on Amazon...
Brand: EEEKit | Manufacturer: EEEkit
Dimensions: 1.00 x 6.00 x 1.00 Inches
See On Amazon #3
Onyehn 8pcs Controller 3D Analog Joystick Thumb Sticks Replacement Repair Parts for Xbox One/Xbox Elite Controller Also for PS4 Controller(8 Pack)
Asin: B07NM7GW91 | Model: LA068 | PartNumber: LA068 | Ean: 8431246151188
Compatibility:Xbox One Wired Controller/Wireless Controller/Ps4 Controllers.
Package Includes: (No Retail Package) 8 X 3D Analog Joystick.
Replacement 3-Pin Analog Stick For Xbox One.Compatible On Official Microsoft Xbox One/Xbox Elite Controllers And Ps4 Controllers..
Fix For Problems Like Stick Drift, Creeping, Stuttering, Blind Spots, Dead Zones, No Click, Non-Centered, Broken, And Loose Joysticks.
Features
- NEEDS MODERATE SOLDERING.PROFESSINAL INSTALLATION IS HIGHLY RECOMMENDED,INSTRUCTION OR TOOL IS NOT INCLUDED.
- Fix for problems like stick drift, creeping, stuttering, blind spots, dead zones, no click, non-centered, broken, and loose joysticks
- Compatibility:Xbox One Wired Controller/Wireless Controller/PS4 Controllers
- Replacement 3-pin analog stick for Xbox One.Compatible on Official Microsoft Xbox One/xbox elite Controllers and PS4 Controllers.
- Package includes: (No retail package) 8 X 3D Analog Joystick
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
Dimensions: 0.59 x 3.15 x 1.97 inches
See On Amazon #4
Switch Joystick Replacement,Linkstyle 6Pcs 3D Analog Joystick Analog Thumb Sticks,Switch Lite Left/Right Joysticks Rocker with Thumbstick Caps Compatible with Nintendo Switch and Joycon Controller
Asin: B08K72NF13 | Model: E098740-L002952618FBA | PartNumber: E098740-L002952618FBA
Easy Installation: No Need For Complicated Operations, Easy And Successful Installation. Please Note That After Installation, Use The Switch Settings To Set The Calibration Joystick..
Waht You Get: 6X Analog Joystick Replacements For Switch/Switch Lite,6X Thumbstick Cover Caps,1X Organizer Case. If You Have Any Questions About The Analog Joystick Replacement, Please Feel Free To Contact Us..
Thumbstick Protection Caps: Come With 6 X Thumbstick Caps That Can Protect Your Joystick From Scratches And Damage. Enough Quantity To Meet Your Replacement Needs And Share With Friends..
Durable: Made Of High-Quality Material That Wear-Resistant, Safe And Comfortable, One Replace Long Use. Box Organizer Design Is Convenient To Carry Or Store..
Features
- 6 3D JOYSTICKS: Upgrade replacement joysticks to work for Switch left/right Joycon joystick. Repair wore, out of control, insensitive analog joystick.
- DURABLE: Made of high-quality material that wear-resistant, safe and comfortable, one replace long use. Box organizer design is convenient to carry or store.
- EASY INSTALLATION: No need for complicated operations, easy and successful installation. Please note that after installation, use the Switch settings to set the calibration joystick.
- THUMBSTICK PROTECTION CAPS: Come with 6 x thumbstick caps that can protect your joystick from scratches and damage. Enough quantity to meet your replacement needs and share with friends.
- WAHT YOU GET: 6x analog joystick replacements for switch/switch lite,6x thumbstick cover caps,1x organizer case. If you have any questions about the analog joystick replacement, please feel free to contact us.
- See more on Amazon...
Brand: Linkstyle | Manufacturer: Linkstyle
See On Amazon #5
uxcell Joystick Ball Top Handle Rocker Round Head Arcade Game DIY Parts Replacement Red 2Pcs
Asin: B07WNDCPY9 | Model: a19062100ux0150 | PartNumber: a19062100ux0150
Ball Top Can Be Replaced Easily. Perfect Parts For Arcade Game Machine..
Thread Size: M6; Ball Top Diameter: 35Mm / 1.4 Inch.
We Have 7 Colors For You To Select: White/ Red/ Green/ Blue/ Black/ Pink/ Yellow..
Easy To Install. Durable. Fits All M6 Screw Joystick..
Features
- 35mm arcade game round ball top joystick handle
- Easy to install. Durable. Fits all M6 screw Joystick.
- Ball top can be replaced easily. Perfect parts for arcade game machine.
- We have 7 colors for you to select: White/ Red/ Green/ Blue/ Black/ Pink/ Yellow.
- Thread Size: M6; Ball Top Diameter: 35mm / 1.4 inch
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
WMYCONGCONG 10 PCS Game Joystick Breakout Module Game Controller Replacement Joystick Control Stick Compatible with PS2 Switch Joy-Con Controller
Asin: B01N59MK0U | Model: 13 | PartNumber: 13 | Ean: 0642954049386 | UPC: 642954049386
Bi-Directional 10 K Resistor, The Resistance Changes With The Rocker In A Different Direction..
Package Content: 10 Pcs Game Controller Joystick Module. Not Designed For High Current Applications..
Module Uses 5V Power Supply, The Original State Of X, Y Read Voltage Of 2.5 V. When Pressing At The Arrow Direction, Voltage Increases, Maximum Is 5 V, At Opposite Direction Of The Arrow, The Voltage Value Decreases, Minimum Is 0 V..
Do Port For Digital Output, Ao Port For Analog Output..
Features
- Game joystick module compatible with PS2, electronic building blocks standard connector with 2.54mm pin.
- DO port for digital output, AO port for analog output.
- Bi-directional 10 k resistor, the resistance changes with the rocker in a different direction.
- Module uses 5V power supply, the original state of X, Y read voltage of 2.5 V. When pressing at the arrow direction, voltage increases, maximum is 5 v, at opposite direction of the arrow, the voltage value decreases, minimum is 0 v.
- Package Content: 10 pcs Game Controller Joystick Module. NOT designed for high current applications.
- See more on Amazon...
Brand: WMYCONGCONG | Manufacturer: WGCD
See On Amazon #7
Veanic Replacement Joystick Analog Thumb Stick Repair Kit for Nintendo Switch/Switch OLED Model/Switch Lite Joy-Con Controller - Include Y1.5, Cross Screwdriver, Pry Tools + 2 Thumbstick Caps
Asin: B07GM5MP6M | Ean: 6165438854473
Complete Tool Set To Finish The Repair, This Is The Perfect Solution To Make Your Controller Working Like New Again. No Need To Spend $80 For A Brand New Controller. Package Inlude The "Y1.5" Screwdriver And "+1.5" Cross Screwdriver Repair Tools, Tweezers, And Pry Tools..
We Back On Our Products! If You Are Not Satisfied With Your Purchase Within 90 Days, Please Feel Free To Contact Us. We Will Reply You Within 24 Hours..
Note: Please Calibrate The Joystick By Using Nintendo Switch Setting After Installation..
True Oem And High Quality Joystick Replacement Fixing The Joy-Con Drift, Stuttering, Blind Spots, Dead Zones, No Click, Non-Centered Issues, Bring Your Controller Back To Life..
Features
- The Joycon Replacement Joystick works for the Joycon controller of Nintendo Switch (2017 Release), Nintendo Switch lite (2019 Release) and Ninetndo Switch OLED Model (2021 Release)
- TRUE OEM and High Quality joystick replacement fixing the Joy-Con drift, stuttering, blind spots, dead zones, no click, non-centered issues, bring your controller back to life.
- Complete tool set to finish the repair, this is the perfect solution to make your controller working like new again. No need to spend $80 for a brand new controller. Package inlude the Y1.5 Screwdriver and +1.5 Cross Screwdriver repair tools, tweezers, and pry tools.
- NOTE: Please calibrate the joystick by using Nintendo Switch setting after installation.
- We back on our products! If you are not satisfied with your purchase within 90 days, please feel free to contact us. We will reply you within 24 hours.
- See more on Amazon...
Brand: Veanic | Manufacturer: Veanic
See On Amazon #8
TOMSIN 2pcs Replacement Analog Module 3D Joystick Sensor Thumbsticks for Switch Pro Controller
Asin: B08CK49YLV | Model: VGR0047 | PartNumber: VGR0047 | Ean: 0738631471110 | UPC: 738631471110
High-Quality: 100% Genuine Original Analog Module And Thumbstick Of The Highest Quality. Fix Drifting, Broken And Loosen Joysticks On Switch Pro Controller..
To See Other Accessories For N Switch In Our Range, Simply Search 'Tomsin' In The Search Bar Above..
Package Includes: 2 X 3D Analog Module, 2 X Replacement Thumbsticks, 1 X Phillips Screwdriver, 1 X Double-Ended Spudger.
Compatibility: Perfect Fit For N Switch Pro Controller..
Features
- NOTE: Needs moderate soldering. Professional installation is highly recommended, instruction and soldering tools are not included.
- COMPATIBILITY: Perfect fit for N Switch Pro controller.
- HIGH-QUALITY: 100% Genuine Original Analog Module and Thumbstick of the highest quality. Fix Drifting, Broken and Loosen Joysticks on Switch Pro controller.
- PACKAGE INCLUDES: 2 X 3D Analog Module, 2 X Replacement Thumbsticks, 1 X Phillips Screwdriver, 1 X Double-Ended Spudger
- To see other accessories for N Switch in our range, simply search 'TOMSIN' in the search bar above.
- See more on Amazon...
Brand: TOMSIN | Manufacturer: TOMSIN
See On Amazon #9
ElecGear 4X Replacement Joystick (EL2 FU 10K) + 4X Drift Fix PCB for PS4 / PS3 Wireless Controller, Analog Stick Controller Sensor Assembly Thumbstick Module for Playstation
Asin: B07R7RJ4KY | Model: EL2-FU-10K | PartNumber: EL2-FU-10K | Ean: 0682141318000 | UPC: 682141318000
[Additional Resistor] – Complicated Moving Mechanism And Daily Wear And Tear Finally Caused Drifting. Even New Sensors Cannot Be 100% Balanced. Calibrating In Controller Settings Might Not Work. We Packed 10X Correction Resistors To Solve The Potential Problem In Hardware Level. Solder One Or Two Paralleled Tiny Resistors Onto The Potentiometer At The Opposite Direction Against Drifting. It Will Help Correct 3 To 5 Degrees Drifting.
[Reminder Of Diy] – With As Many As 14 Prongs, De-Soldering And Soldering The Whole Module Takes Serious Skills. We Suggest Replacing The Potentiometers First To Solve Most Of The Joystick Problems. To Desolder The Entire Joystick Module Off Pcb By A Normal Soldering Iron, Please Take A Look At The Desoldering Kit At Product Id: B0bk7169m8.
[When To Replace] – The Analog Joystick Needs To Be Replaced When Your Controller Has The Problem Of Drifting, Creeping, Stuttering, A Blind Spot, A Dead Spot, A Dead Zone, No Reaction When Clicking, Or It Wouldn't Center After Years Of Wear And Tear. The Oem Genuine Repair Parts Ensure Accuracy And Prolong Lifespan.
[Compatibility] – The 14 Prongs Were Positioned As The Same As Alps Edition. Technically, The Whole Unit Is Interchangeable With El1 Alps 10K Used In Ps4 Controllers, And Other Brands Like ‘Scuf’ And ‘Razer Raiju Ultimate’ With Alps Joysticks Inside. However, The Trim Pot Resistor Alone Is Not Interchangeable With Alps Edition.
Features
- [EL2 FU 10K for PS4/PS3 Controller] 4x replacement analog joystick was found in some PS4 DualShock 4 came with PlayStation 4 Pro, and some PS3 controllers also use this version. The thumbstick module was made by Favor Union (FU). The stick controller comes with 10K trimmer potentiometers in orange
- [Compatibility] The 14 prongs were positioned as the same as ALPS edition. Technically, the whole unit is interchangeable with EL1 ALPS 10K used in PS4 controllers, and other brands like Scuf and Razer Raiju Ultimate with ALPS joysticks inside. However, the trim pot resistor alone is not interchangeable with ALPS edition
- [Additional Resistor] Complicated moving mechanism and daily wear and tear finally caused drifting. Even new sensors cannot be 100% balanced. Calibrating in controller settings might not work. We packed 10x correction resistors to solve the potential problem in hardware level. Solder one or two paralleled tiny resistors onto the potentiometer at the opposite direction against drifting. It will help correct 3 to 5 degrees drifting
- [When to replace] The analog joystick needs to be replaced when your controller has the problem of drifting, creeping, stuttering, a blind spot, a dead spot, a dead zone, no reaction when clicking, or it wouldn't center after years of wear and tear. The OEM genuine repair parts ensure accuracy and prolong lifespan
- [Reminder of DIY] With as many as 14 prongs, de-soldering and soldering the whole module takes serious skills. We suggest replacing the potentiometers first to solve most of the joystick problems. To desolder the entire joystick module off PCB by a normal soldering iron, please take a look at the desoldering kit at product ID: B0BK7169M8
- See more on Amazon...
Brand: ElecGear | Manufacturer: ElecGear
See On Amazon #10
Wigearss Replacement 3D Analog Joystick and Repair Tool Kit for N Switch/Switch OLED Joy-Con/Switch Lite - Black
Asin: B0B1V4MK8T | Model: INSP0166 | PartNumber: INSP0166 | Ean: 4895232013982
-Compatible With Joy-Con Controllers And Switch Lite Joystick Only..
-Replaces You Worn-Out Or Damaged Analog Joystick. Fix The Joystick Drift Issues And Bring Your Controller Back To Life..
Features
- -High quality replacement analog joystick for N Switch/Switch OLED Joy-con controllers and Switch Lite joystick.
- -Replaces you worn-out or damaged analog joystick. Fix the joystick drift issues and bring your controller back to life.
- -Compatible with Joy-Con controllers and Switch Lite joystick only.
- See more on Amazon...
Brand: Wigearss | Manufacturer: Wigearss
Weight: 0.11 pounds
See On Amazon #11
uxcell Joystick Ball Top Handle Rocker Round Head Arcade Game DIY Parts Replacement Black 2Pcs
Asin: B07WNDCKWT | Model: a19062100ux0154 | PartNumber: a19062100ux0154
Ball Top Can Be Replaced Easily. Perfect Parts For Arcade Game Machine..
Thread Size: M6; Ball Top Diameter: 35Mm / 1.4 Inch.
We Have 7 Colors For You To Select: White/ Red/ Green/ Blue/ Black/ Pink/ Yellow..
Easy To Install. Durable. Fits All M6 Screw Joystick..
Features
- 35mm arcade game round ball top joystick handle
- Easy to install. Durable. Fits all M6 screw Joystick.
- Ball top can be replaced easily. Perfect parts for arcade game machine.
- We have 7 colors for you to select: White/ Red/ Green/ Blue/ Black/ Pink/ Yellow.
- Thread Size: M6; Ball Top Diameter: 35mm / 1.4 inch
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
Avisiri 2X Arcade Joystick's Oval Balltop, Arcade Ellipse Topball Handle use for 2 Player Arcade Joystick DIY Kit Sanwa Joystick MAME Jamma Part (Red & Blue)
Asin: B07MDM62W6 | Ean: 0714973194092 | UPC: 714973194092
Used All M6 Screw Joystick And Sanwa Joystick.
Size: Width-30Mm, High-51Mm.
Easy To Remove The Ball Top For All Stick.
Features
- High-Quality, American style Joystick's Ball Top
- Easy to Remove the Ball Top For All Stick
- Used All M6 screw Joystick and Sanwa joystick
- Size: Width-30mm, High-51mm
- See more on Amazon...
Brand: Avisiri | Manufacturer: Avisiri
See On Amazon #13
RGEEK 2pcs 3D Analog Joystick Thumb Sticks Sensor Replacement for Xbox one Controller
Asin: B07V6T14KQ | Ean: 8431269709762
Compatibility:Xbox One Wired Controller/Wireless Controller.
Package Included: 2 X 3D Analog Joysticks&2 X Thumbsticks Cap.
It Will Make Your Controller Back To Life..
Needs Moderate Soldering. Professional Installation Is Highly Recommended, Instruction Or Tool Is Not Included.
Features
- A good replacement for your damaged or non-working 3D Joystick Axis & Thumb Stick
- Needs moderate soldering. Professional installation is highly recommended, instruction or tool is not included
- Compatibility:Xbox One Wired Controller/Wireless Controller
- It will make your controller back to life.
- Package included: 2 x 3D Analog Joysticks&2 x Thumbsticks Cap
- See more on Amazon...
Brand: RGEEK | Manufacturer: Coshare
Dimensions: 0.50 x 1.00 x 1.00 inches
See On Amazon #14
Create idea 2Pcs 5 Pin 8 Way Arcade Joystick Replacement Fighters Joystick Fit for Arcade Game Machines Ball Top Handle Controllers Accessories
Asin: B0C5CYNLH9 | Ean: 6976061462498
Operability : This Arcade King Of Fighters Joystick Adopts A Square Gear Design, Which Can Realize A Variety Of Different Operation Modes To Meet The Needs Of Different Types Of Games. At The Same Time, It Has A 32Mm Longer Joystick, Which Allows Players To More Easily Control The Actions Of Game Characters And Improve The Gaming Experience..
Application Scenarios : This Arcade King Of Fighters Joystick Is Widely Applicable To Various Types Of Arcade Game Machines, And Has A Wide Range Of Application Scenarios..
Easy Installation : This Arcade King Of Fighters Rocker Only Needs To Insert The 5P Straight Pin Interface Into The Corresponding Slot, No Other Tools And Accessories Are Required.
Material : This Arcade King Of Fighters Joystick Is Made Of Plastic And Alloy, Which Is Durable And Stable. The Joystick Ball Head Has Anti-Slip, Anti-Sweat And Other Functions, So That Players Are Less Likely To Slip Off With Sweaty Hands During The Game..
Features
- Specifications : This arcade King of fighters joystick adopts 5P straight pin interface, including one red and one black. 5 Pin 8 Way square arcade joystick, which can provide more precise and smooth control, allowing players to experience a more comfortable operating feeling in the game.
- Material : This arcade king of fighters joystick is made of plastic and alloy, which is durable and stable. The joystick ball head has anti-slip, anti-sweat and other functions, so that players are less likely to slip off with sweaty hands during the game.
- Operability : This arcade King of Fighters joystick adopts a square gear design, which can realize a variety of different operation modes to meet the needs of different types of games. At the same time, it has a 32mm longer joystick, which allows players to more easily control the actions of game characters and improve the gaming experience.
- Easy installation : This arcade King of Fighters rocker only needs to insert the 5P straight pin interface into the corresponding slot, no other tools and accessories are required
- Application scenarios : This arcade King of Fighters joystick is widely applicable to various types of arcade game machines, and has a wide range of application scenarios.
- See more on Amazon...
Brand: Create idea | Manufacturer: Create idea
See On Amazon #15
RGEEK 2 Pack 3D Analog Joystick Thumb Sticks Replacements for Nintend Switch Joy Con Controlle Switch Lite, Replacement Left/Right Repair Analog Jostick Thumb Sticks
Asin: B07MZ6PDG9 | Model: Joy-3 | PartNumber: Joy-3
Replaces Your Worn-Out Or Damaged Analog, Fix The Joycon Controller Drift Issues, Bring Your Controller Back To Life.
Note: Please Calibrate The Joystick Using Nintendo Switch Setting After Installation If It Drifts.
Replacement 3D Analog Joystick Thumb Stick Joystick Sensor Module For Nintend Switch Ns Controller Or Switch Lite.
Features
- Package Include:2 pcs x Joystick For Switch Joy Con , 4 Replacement "Y" Screws
- Replacement 3D Analog Joystick Thumb Stick Joystick Sensor Module For Nintend Switch NS Controller or Switch lite
- Replaces your worn-out or damaged analog, fix the joycon controller drift issues, bring your controller back to life
- NOTE: Please calibrate the joystick using Nintendo switch setting after installation if it drifts
- See more on Amazon...
Brand: RGEEK | Manufacturer: Coshare
See On Amazon #16
JAOYSTII Joycon Joystick Replacement 4 Pack, 3D Replacement Joystick Analog for Nintendo Switch Joycon, Left/Right Thumb Stick with Thumbstick Grips
Asin: B08FCD2J7F | Ean: 0008574924548 | UPC: 008574924548
Customized Set -- When Disassembling The Joycon, Please Be Careful To Unsrew The "Y"Screws To Avoid Slippage..
Satisfaction Guarantee -- We Provide ★30 Days Free Return & Replacement. If You Have Any Question About The Analog Joystick Replacement, Please Feel Free To Contact Us. We Will Reply To You Within 24 Hours..
Complete Kit -- The Repair Kit Includs 4 X Joystick Replacements, 4 X Thumbstick Caps, 4 X "Y" Screws, 4 X "+" Screws..
Advanced Analog Joystick -- We Have Tested Each 3D Replacement Joystick Analog To Make Sure It Could Work Well. Made Of Compact Material, The New Version Of Analog Joystick Replacements Are Wear-Resistant..
Features
- Work for Left or Right Joycon -- The joystick work for Nintendo Switch Joy-con & Nintendo Switch OLED Joy-con & Nintendo Switch Lite. Replace your drifting, insensitive or damaged analog joystick.
- Advanced Analog Joystick -- We have tested each 3D replacement joystick analog to make sure it could work well. Made of compact material, the new version of analog joystick replacements are wear-resistant.
- Customized Set -- When disassembling the Joycon, please be careful to unsrew the Yscrews to avoid slippage.
- Complete Kit -- The repair kit includs 4 x joystick replacements, 4 x thumbstick caps, 4 x Y screws, 4 x + screws.
- Satisfaction Guarantee -- We provide 30 DAYS FREE RETURN & REPLACEMENT. If you have any question about the analog joystick replacement, please feel free to contact us. We will reply to you within 24 hours.
- See more on Amazon...
Brand: JAOYSTII | Manufacturer: JAOYSTII
Dimensions: 2.76 x 2.76 x 0.67 inches
See On Amazon #17
1pcs Arcade Joystick, Adjustable Competition Style Long Handle Joystick Classic 2/4/8 Way Game Joystick Ball for Arcade Gaming Cabinet Button Kit
Asin: B0824P1CDS | Ean: 0738586120293 | UPC: 738586120293
Durability - Made From High-Quality Materials, The Arcade Joystick Is Designed To Withstand Heavy Use. It Provides A Consistent And Reliable Performance For Any Game You Play..
Experience The Excitement - Redefine Your Gaming With Our Arcade Joystick. Ideal For Diy Arcade Game Machine Projects, Home Game Room Upgrades, And Commercial Game Cabinets..
Easy Installation - The Joystick Comes With An Adjustable Competition-Style Long Handle For Easy Installation. It Fits Seamlessly With Any Arcade Gaming Cabinet Button Kit..
Wide Compatibility - The Joystick Is Compatible With Pc Gaming And Works Smoothly With Any Arcade Gaming Parts. It Can Be Used As The 2/4/8 Way Joystick, Providing The Gaming Experience..
Features
- Perfect Addition to Your Arcade Gaming Setup - This Arcade Joystick is an excellent choice for your gaming cabinet. This joystick will bring back the nostalgia of the good old days of arcade gaming.
- Wide Compatibility - The joystick is compatible with PC gaming and works smoothly with any arcade gaming parts. It can be used as the 2/4/8 way joystick, providing the gaming experience.
- Durability - Made from high-quality materials, the Arcade Joystick is designed to withstand heavy use. It provides a consistent and reliable performance for any game you play.
- Easy Installation - The joystick comes with an adjustable competition-style long handle for easy installation. It fits seamlessly with any arcade gaming cabinet button kit.
- Experience the Excitement - Redefine your gaming with our arcade joystick. Ideal for DIY arcade game machine projects, home game room upgrades, and commercial game cabinets.
- See more on Amazon...
Brand: Sheens | Manufacturer: Sheens
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.62 Pounds
See On Amazon #18
uxcell Ellipse Oval Joystick Head Rocker Ball Top Handle Arcade Game DIY Parts Replacement Red 2Pcs
Asin: B07WKJNMBP | Model: a19062100ux0129 | PartNumber: a19062100ux0129
Ball Top Can Be Replaced Easily. Perfect Parts For Arcade Game Machine..
Thread Size: M6; Total Size: 52 X 30Mm / 2 X 1.2 Inch (H*W).
We Have 5 Colors For You To Select: White/ Red/ Green/ Blue/ Black..
Easy To Install. Durable. Fits All M6 Screw Joystick..
Features
- Ellipse ball top joystick handle
- Easy to install. Durable. Fits all M6 screw Joystick.
- Ball top can be replaced easily. Perfect parts for arcade game machine.
- We have 5 colors for you to select: White/ Red/ Green/ Blue/ Black.
- Thread Size: M6; Total Size: 52 x 30mm / 2 x 1.2 inch (H*W)
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
Zerone 3D Joystick Axis Analog Sensor Replacement Module, Replacement Analog Stick Joystick Parts for Xbox One Game Console Controller Repairing (2 Pack)
Asin: B07SY83THR | Ean: 0794419938909 | UPC: 794419938909
Ideal Repaclement Part: This Controller Joystick Is Great Replacement For Damaged Or Broken One..
Application: This 3D Joystick Is Suitable For Xbox One Console Controller..
Easy Instllation: Game Joystick Is Easy To Install And Convenient To Use..
3D Technology: 3D Analog Sensor Joystick For Xbox One Controller, You Can Enjoy Different Gaming Experience..
Features
- HigH Quality: The joystick is made of high quality material, sturdy, not easy to aging and wear-resistant, to ensure maximum strength and durability for long lasting usage.
- 3D Technology: 3D Analog sensor joystick for Xbox One controller, you can enjoy different gaming experience.
- Ideal Repaclement Part: This controller joystick is great replacement for damaged or broken one.
- Easy Instllation: Game joystick is easy to install and convenient to use.
- Application: This 3D joystick is suitable for Xbox One Console Controller.
- See more on Amazon...
Brand: Zerone | Manufacturer: Zerone
See On Amazon
Looking For Something Else?
Search