Injector Cup Remover Installer Tool for Detroit Diesel 60 Series, Replace J-46904 & J-48824, Injector Nozzle/Cup/Sleeve/Tube Remover Installers
Asin: B08CMVGHRP | Model: Nozzle Remover Installers | PartNumber: Nozzle Remover Installers | Ean: 0750466800354 | UPC: 750466800354
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.[Functions] - Works On Screw-In Stainless Steel Cups To Remove Or Install The Injector Cups. Properly Set Injector Body Height To The Injector Follower For Proper Fuel Injector Timing. Incorrect Injector Timing Can Cause Engine Power Issues, Poor Idle Quality And Fuel Mileage Issues, Significantly Saving Your Time And Energy..
[What Will You Get] - We Offer 2-Years Shelf Life, Hassle-Free Return And Money Back Policy, Buy With Confidence! You Will Get J-46904 J-48824 Injector Sleeve Removal Installer Tool.
[High Quality] - Advanced Blackening Hard Steel Process, Durability And Anti-Corrosion. Ultra-Precise Design Meets The Requirement Of High Precision And Hardness And A Much Longer Service Life..
[Replace Part Number] - Alternative To J-46904 J-48824. Use J-46904 For Screw-In Stainless Cups 240-1039 23538840 240-1035 23533148. Use J-48824 For Screw-In Stainless Cups 240-1045 23534745 23538829..
Features
- [Compatibility] - Works on Detroit Series 60 engine.
- [Replace Part Number] - Alternative to J-46904 J-48824. Use J-46904 for screw-in stainless cups 240-1039 23538840 240-1035 23533148. Use J-48824 for screw-in stainless cups 240-1045 23534745 23538829.
- [Functions] - Works on screw-in stainless steel cups to remove or install the injector cups. Properly set injector body height to the injector follower for proper fuel injector timing. Incorrect injector timing can cause engine power issues, poor idle quality and fuel mileage issues, significantly saving your time and energy.
- [High Quality] - Advanced blackening hard steel process, durability and anti-corrosion. Ultra-precise design meets the requirement of high precision and hardness and a much longer service life.
- [What will you get] - We offer 2-years shelf life, hassle-free return and money back policy, buy with confidence! You will get J-46904 J-48824 injector sleeve removal installer tool
- See more on Amazon...
Brand: TIKSCIENCE | Manufacturer: Injector Cup Remover Installer
See On Amazon Similar To Injector Cup Remover Installer Tool
#1
Fuel Injector Puller Removal Set Injector Seal Installer Service Tool Kit Compatible with Audi VW 1.4 1.6 1.8 2.0 2.7 3.0 3.2 3.6 V6 4.2 V8 FSI TSI Petrol
Asin: B07GP3DXX4 | Model: HTQ1008B | PartNumber: HTQ1008B | Ean: 0732025172034, 0724873168598 | UPC: 732025172034, 724873168598
More Tools: Our Injector Puller Tool Set Include 18Pcs Tools, Complete Tool Kit To Help You Replace Injector Only One Time, And The Case Easy To Carry.
12 Months Warranty: We Offer 12 Months Warranty,We Will Refund Or Replace If The Tool Have Any Quality Problem.
Professional Injector Puller: This Designed Specifically For Vw Tsi Engine, Precisely Machined Ensure Accurate, Perfect Adaptat Vw Engine, Made Of Professional High-Strength Steel, High Hardness And Strong Toughness, Not Easy To Damage, Professional Quality Makes You More Assured.
Efficient Replace Injector Seals: This Injector Puller Set Easy To Pull Injectors, Help You To Reseal And Reinstall Fuel Injectors, Saved You A Lot Of Time And Frustration; Or If You Want Carbon Cleaning On A Vw Tsi, You Need This Injector Puller.
Features
- Applicable Engine: Injector puller tool set fit 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compitable with Seat Skoda, not fit diesel engines
- Efficient Replace Injector Seals: This Injector puller set easy to pull injectors, help you to reseal and reinstall fuel injectors, saved you a lot of time and frustration; or if you want carbon cleaning on a VW TSI, you need this injector puller
- More Tools: Our injector puller tool set include 18pcs tools, complete tool kit to help you replace injector only one time, and the case easy to carry
- Professional Injector Puller: This designed specifically for VW TSI engine, precisely machined ensure accurate, perfect adaptat VW engine, made of professional high-strength steel, high hardness and strong toughness, not easy to damage, professional quality makes you more assured
- 12 Months Warranty: We offer 12 months warranty,we will refund or replace if the tool have any quality problem
- See more on Amazon...
Brand: DPTOOL | Manufacturer: Shenzhen Dapeng Aoto Tools CO.,LTD
Dimensions: 2.90 x 11.60 x 9.40 inches
See On Amazon #2
ABN Diesel Injector Puller Tool with Slide Hammer, Common Rail Injector Remover w/ M8, M12, M14 Thread Adapter
Asin: B07FDLYD42 | Model: ABN-3124 | PartNumber: ABN-3124 | Ean: 0811498033124 | UPC: 811498033124
Great For Bosch And Lucas Injectors: This Kit Includes A 7-Inch (178 Mm) Bar And A 1.3 Lb. (.6 Kg) Slap Hammer Weight Along With M8, M12, M14 Thread Adapters; This Injector Puller Tool Assists In Removing Stubborn Bosch And Lucas Diesel Injectors; Adaptors And Slide Hammer Are Stored In A Convenient Plastic Box For Storage And Travel.
Easy To Use: To Use, First Attach The Tool To The Injector You Wish To Remove, Then Yank The Weight Towards The Handle To Give An Extra Snap Of Weight To The Stuck Part; The Force Transfers To The Shaft, Pulling The Attached End And Injector In The Desired Direction; Repeat Action Until The Part Is Removed; Always Work With A Cold Engine To Avoid Damage And Remember To Replace All Injectors As A Set To Keep Engine Balanced.
Durable Construction: Made Of A Strong, Durable Steel, This Automotive Hammer Puller Tool Is Sure To Pull Even The Toughest Fuel Injectors From Tight Positions; This Remover Kit Has A Steel Rod With Two Threaded Ends; The Durable Metal Helps To Increase Pulling Strength And Force While Also Providing Longevity For The Tool.
Replacing Old Injectors: Fuel Injectors Are Important As They Are What Injects Fuel Directly Into The Cylinder, But Because Of Their Continuous Use, They Are Prone To Cracks, Breaks, And Minor Physical Wear; Symptoms Of This Issue Can Range From Rough Engine Idle, Slow Acceleration, Misfire, Bad Gas Mileage, To Gas Leaks; This Fuel Injector Tool Helps To Easily Remove Injectors For Testing And Cleaning As Well As Replacement.
Features
- INJECTOR REMOVAL TOOL: The ABN Diesel Fuel Injector Slide Puller is designed for removing stuck common-rail diesel injectors quickly and safely without dismantling the cylinder head for injector nozzle cars; The injector remover kit contains a 1.3-pound (.6 kg) shop hammer weight and M8, M12, M14 adapters
- REPLACING OLD INJECTORS: Fuel injectors are important as they are what injects fuel directly into the cylinder, but because of their continuous use, they are prone to cracks, breaks, and minor physical wear; Symptoms of this issue can range from rough engine idle, slow acceleration, misfire, bad gas mileage, to gas leaks; This fuel injector tool helps to easily remove injectors for testing and cleaning as well as replacement
- GREAT FOR BOSCH AND LUCAS INJECTORS: This kit includes a 7-inch (178 mm) bar and a 1.3 lb. (.6 kg) slap hammer weight along with M8, M12, M14 thread adapters; This injector puller tool assists in removing stubborn Bosch and Lucas diesel injectors; Adaptors and slide hammer are stored in a convenient plastic box for storage and travel
- DURABLE CONSTRUCTION: Made of a strong, durable steel, this automotive hammer puller tool is sure to pull even the toughest fuel injectors from tight positions; This remover kit has a steel rod with two threaded ends; The durable metal helps to increase pulling strength and force while also providing longevity for the tool
- EASY TO USE: To use, first attach the tool to the injector you wish to remove, then yank the weight towards the handle to give an extra snap of weight to the stuck part; The force transfers to the shaft, pulling the attached end and injector in the desired direction; Repeat action until the part is removed; Always work with a cold engine to avoid damage and remember to replace all injectors as a set to keep engine balanced
- See more on Amazon...
Brand: ABN | Manufacturer: ABN
Dimensions: 2.50 x 12.00 x 3.00 inches
See On Amazon #3
Injector Tube Remover Installer Tools Kit for 2001~2020 GM 6.6L Duramax Diesel Similar to OTC-7222 Replaces J-45910
Asin: B07RPMTZ2Q | Ean: 6479295688165
Removes Injector Tubes For Service And Re-Installs..
Package: 1*Injector Tube Tools Kit. Having Any Questions, Contact To Us And Got An Ideal Reply Within 24 Hours..
Manufactured Utilizing The Highest Quality Materials..
Built To Provide Exceptional Levels Of Durability. Enable The Technician To Remove The Tube Assembly And Replace The O-Rings As Needed To Ensure A Good Seal..
Features
- Fit for 2001~ 2020 GM 6.6L Duramax Diesel.
- Built to provide exceptional levels of durability. Enable the technician to remove the tube assembly and replace the o-rings as needed to ensure a good seal.
- Removes injector tubes for service and re-installs.
- Manufactured utilizing the highest quality materials.
- Package: 1*Injector Tube Tools Kit. Having any questions, contact to us and got an ideal reply within 24 hours.
- See more on Amazon...
Brand: Bolaxin | Manufacturer: Antozon
See On Amazon #4
DAYUAN Diesel Injector Puller Tool with Slide Hammer, Fuel Injector Remover with M8 M12 M14 Thread Adapters
Asin: B09Z1QDYV6 | Model: 99674 | PartNumber: 99674 | Ean: 0754008750220 | UPC: 754008750220
Constraction: The Automotive Hammer Puller Tool Has A Steel Rod With Two Threads Helps To Increase Pulling Strength To Pull The Toughest Injectors From Tight Positions..
Durable: This Diesel Injector Remover Is Made Of High Quality Steel Which Is Strong And Durable, Rust Resistant, Corrosion Resistant And Long Lasting..
Easy To Use: Install The Tool On The Injector While The Engine Not Working Cool, The Stuck Part Will Get An Extra Weight, Then Transfer This Weight To The Shaft, Pull The Connected End And The Injector In The Desired Direction, Keep Repeating This Action Until The Injector Is Removed..
Fitment: This Diesel Injector Puller Tool Assists In Removing Stubborn Bosch And Lucas Diesel Injectors, Is A Great Replacement For Bosch And Lucas..
Features
- Function: Fuel Injectors inject fuel directly into the cylinder, if used continuously for a long time, they are prone to crack and minor physical wear, which may lead to engine instability, misfire, high fuel consumption or oil leaks. This diesel injector puller easily and safely removes injectors for testing, cleaning and replacement without removing the cylinder head.
- Fitment: This diesel injector puller tool assists in removing stubborn Bosch and Lucas diesel injectors, is a great replacement for Bosch and Lucas.
- Constraction: The automotive hammer puller tool has a steel rod with two threads helps to increase pulling strength to pull the toughest injectors from tight positions.
- Easy to use: Install the tool on the injector while the engine not working cool, the stuck part will get an extra weight, then transfer this weight to the shaft, pull the connected end and the injector in the desired direction, keep repeating this action until the injector is removed.
- Durable: This diesel injector remover is made of high quality steel which is strong and durable, rust resistant, corrosion resistant and long lasting.
- See more on Amazon...
Brand: DAYUAN | Manufacturer: Yinyuan Tools
Dimensions: 2.95 x 12.01 x 3.74 inches
See On Amazon #5
Injector Puller and Teflon Seal Installer Tools Set Fits for BMW N14 N18 N54 N63 Diesel Engines, Alternative to 130192, 130193, 130194 and 130195
Asin: B08WRTLJPP
【Direct Replacement】Comparable For Bmw Tools 130192, 130193, 130194 And 130195. Makes Pulling Injectors More Simple And Fast, And Works Perfect For Adding New Seals To The Injectors, Helps Protect Your Fuel Injectors From Damage..
【Superior Material】Made From Top Quality Steel For Great Strength, Prevent Corrosion And Rust, Wear And Impact Resistance, Sturdy And Durable. High Precision And Hardness Ensure Long Term Reliable Service..
【100% Satisfaction Guarantee】If You're Not Satisfied With Injector Puller & Teflon Seal Installer Tool Set, Simply Return It For A Full Refund In 30 Days. While You Have Any Questions About Our Products, Please Feel Free To Contact Us And We Will Provide The Best Service. Always Buy Confidently In Bonbo!.
【Package Includes】2 X Pullers, 2 X Calibration Sleeves, 1 X Sliding Hammer, 1 X Adapter, 1 X Assembly Cone & 1 X Assembly Sleeve. This Tools Set Can Be Assembled As An Injector Puller For Pulling And Removing Injectors..
【High Performance】 This Fuel Injector Puller & Injector Seal Installer Tool Set Is Specially Designed To Easily & Quickly Pull Injectors Out Of Your Engine Without Issues, Allows You Effortless Install The New Replacement Injector Teflon Seals..
Features
- Wide Application Perfectly compatible with BMW N14 N18 N54 N63 diesel engines. Fits for 2007 - 2010 BMW 335i, 335xi, X5 3.0L; Fits for 2008 - 2010 BMW 135is, 535i, 535xi, X5 3.0; Fits for 2009 - 2013 BMW 750i, 750Li; Fits for 2010 - 2013 BMW 550i GT; Fits for 2011 - 2013 BMW X5; Fits for 2007 - 2012 Mini Cooper N14 engines.
- High Performance This Fuel Injector Puller & Injector Seal Installer Tool Set is specially designed to easily & quickly pull injectors out of your engine without issues, allows you effortless install the new replacement injector Teflon seals.
- Direct Replacement Comparable for BMW Tools 130192, 130193, 130194 and 130195. Makes pulling injectors more simple and fast, and works perfect for adding new seals to the injectors, helps protect your fuel injectors from damage.
- Package Includes 2 x Pullers, 2 x Calibration Sleeves, 1 x Sliding Hammer, 1 x Adapter, 1 x Assembly Cone & 1 x Assembly Sleeve. This tools set can be assembled as an injector puller for pulling and removing injectors.
- Superior Material Made from top quality Steel for great strength, prevent corrosion and rust, wear and impact resistance, sturdy and durable. High precision and hardness ensure long term reliable service.
- 100% Satisfaction Guarantee If you're not satisfied with Injector Puller & Teflon Seal Installer Tool Set, simply return it for a full refund in 30 days. While you have any questions about our products, please feel free to contact us and we will provide the best service. Always buy confidently in Bonbo!
- See more on Amazon...
Brand: Bonbo | Manufacturer: Bonbo
See On Amazon #6
Yuesstloo Fuel Injector Puller Removal Installer Kit, Compatible with Audi VW 1.4 1.6 1.8 2.0 2.7 3.0 3.2 3.6 V6 4.2 V8 FSI TSI, with Carrying Case & Gloves
Asin: B0B6P6GPTW
Made Of High-Quality Material, High Hardness And High Strength, Not Easy To Break, And High-Precision Matching..
Our Products Are Professional Auto Tools. If There Is Some Problem With Our Products, You Can Get Help From Us..
Comes With A Carrying Case For Easy Transport And Storage. And We Also Prepare A Pair Of Gloves For You To Wear When You Are Using This Tool..
Application: The Fuel Injector Puller Tool Set Is Compatible With Audi Seat Skoda Vw 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, 4.2 V8 Fsi Tsi Tfsi Petrol Engine, Not Intended For Diesel Engines..
Features
- Yuesstloo Fuel Injector Removal Kit makes it easy to reseal and reinstall fuel injectors, and used for carbon cleaning on VW TSI, the complete tool kit makes your job efficient and saves your time.
- Application: The fuel injector puller tool set is compatible with Audi Seat Skoda VW 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, 4.2 V8 FSI TSI TFSI petrol engine, not intended for diesel engines.
- Made of high-quality material, high hardness and high strength, not easy to break, and high-precision matching.
- Comes with a carrying case for easy transport and storage. And we also prepare a pair of gloves for you to wear when you are using this tool.
- Our products are professional auto tools. If there is some problem with our products, you can get help from us.
- See more on Amazon...
Brand: Yuesstloo | Manufacturer: Yuesstloo
See On Amazon #7
Injector Sleeve Cup/Seat/Bore Cleaning Brush Kit Replace AP0084 AP0085 3252 For 1994~2018 Ford Powerstroke 6.0L 6.4L 6.7L 7.3L / Caterpillar 3126 C7 C9 / Navistar / Maxxforce Stainless Steel (2 PCS)
Asin: B081GQJRV1 | Ean: 7427046749121
Upgrade Design — Removing Carbon Deposits, Rust, Dirt And Other Debris From Injector Seats, Bores, And Cups Without Damage. Surfaces Are Cleaned And Polished To Insure Good Seating And Sealing. Make The Job Easier To Save Your Time And Money..
100% Satisfaction Guarantee — If You're Not 100% Satisfied With Our Brush, Simply Return It For A Full Refund In 30 Days. Support 12 Months’ Warranty. Professional & Sincere Service Allows You To Take No Risks To Purchase In E-Cowlboy!.
Special Features — Includes 1–Stainless Steel Spiral Tube Brush And 1–Stainless Steel Flat Bottom Brush. This Complete Injector Brush Kit Should Be A Necessity For Anyone Pulling And Swapping Injectors..
Superior Quality — Premium Grade Wear-Resistant Stainless Steel, Durability, Anti-Corrosion And Never Rust. Comfortable Abs Plastic Handle To Keep Stable And Safe. Provides A Much Longer Service Life..
Features
- Great Compatibility Fit for Ford 4.5L LCF 6.0L 6.4L 6.7L 7.3L Powerstroke | For Caterpillar 3126 C7 C9 | For Navistar T444E DT466 VT365 VT275 | For MaxxForce 5/7/DT/9/10/N9/N10 | For GM | For Chevrolet 6.6L | For Dodge Cummins 5.9L 6.7L | For John Deere 4.5L 6.8L 8.1L 9.0L HPCR | For Isuzu 4HK1 6HK1 HPCR.
- Superior Quality Premium grade wear-resistant stainless steel, durability, anti-corrosion and never rust. Comfortable ABS plastic handle to keep stable and safe. Provides a much longer service life.
- Upgrade Design Removing carbon deposits, rust, dirt and other debris from injector seats, bores, and cups without damage. Surfaces are cleaned and polished to insure good seating and sealing. Make the job easier to save your time and money.
- Special Features Includes 1 Stainless Steel Spiral Tube Brush and 1 Stainless Steel Flat Bottom Brush. This complete injector brush kit should be a necessity for anyone pulling and swapping injectors.
- 100% Satisfaction Guarantee If you're not 100% satisfied with our brush, simply return it for a full refund in 30 days. Support 12 months Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!
- See more on Amazon...
Brand: E-cowlboy | Manufacturer: E-cowlboy
See On Amazon #8
Fuel Injector Remove Tool Injector Slid Hammer Puller Compatible with BMW N14 N18 N20 N26 N53 N54 N55 N63 S63 Engine
Asin: B0995YBWL1 | Model: FU01 | PartNumber: FU01
Easy To Use: Just Use Puller Connection Fuel Injector, Pull The Slide Hammer, Easy To Remove Injector.
12 Months Warranty: This Injector Remove Tool Made Of High Quality Steel, And We Offer 12 Months Warranty, We Will Replace Or Refund If The Tool Have Any Quality Issues.
Economic: Use This Tool Is A Economic And Easy Way To Remove Injector, Will Improve Work Effectiveness.
Application: Compatible With Bmw N14, N18, N20, N26, N53, N54, N55, N63, S63 Engine.
Features
- Function: design for pulling injector, use to removal injector
- Application: compatible with BMW N14, N18, N20, N26, N53, N54, N55, N63, S63 engine
- Easy To Use: Just use puller connection fuel injector, pull the slide hammer, easy to remove injector
- Economic: Use this tool is a economic and easy way to remove injector, will improve work effectiveness
- 12 Months Warranty: This injector remove tool made of high quality steel, and we offer 12 months warranty, we will replace or refund if the tool have any quality issues
- See more on Amazon...
Brand: DPTOOL | Manufacturer: DPTOOL
See On Amazon #9
maXpeedingrods 40 Pcs Diesel Fuel Injector Puller Auto Truck Diesel Injector Extractor Removal Tool Slide Hammer Bearing Puller for Diesel Engines
Asin: B078NT4SLX
Diesel Injector Extractor Master Set - 3 Different Slide Hammers: 1.6 Kg, 160 Mm; 2.7 Kg, 460 Mm; 5.1 Kg, 600 Mm; 2 Pulling Claws With Fork Opening: 13.7 X 18 Mm, 105 Mm;12.7 X 19 Mm, 130 Mm; 5 Slotted 6-Pt 1/2" Sockets, 100 Mm Length; Sizes 25 - 27 - 28 - 29 - 30 Mm; Injector Extractor, Sleeve Design, With Shells: Outer Diameter 35 Mm; Internal Diameter 29 Mm, M17 X 1.0 Spindle; Pulling Adapter With External Thread.
Perfect Kit For You - Maxpeedingrods Diesel Injector Puller Kit Is Very Suitable For Professional Machinist Or Diy Enthusiast.
High Quality Carbon Steel - The Diesel Injector Extractor Set Are Composed Of High-Quality Carbon Steel, Which Is Treated At High Temperature Throughout The Whole Process And Has A Long Service Life. It Is Suitable For Quickly And Safely Disassembling The Fuel Nozzles.
6 Adaptors - M14 X 1.5 For Dalphi-Adaptor; M17 X 1 For Bosc-H Adaptor; M20 X 1 For Den-So Adapters; M25 X 1 For Siemen-S Adapter; M27 X 1 For Siemen-S Adapter; M27 X 1 For Bosc-H Injector Nozzle Adaptor.
Features
- UNIVERSAL APPLICATION - Various adaptor make the set suitable for most diesel injectors. Make your work easier for removal of diesel injectors quickly and great for pulling jobs, against the bearing for pulling out evenly without damage the parts
- 6 ADAPTORS - M14 x 1.5 for dalphi-adaptor; M17 x 1 for bosc-h adaptor; M20 x 1 for den-so adapters; M25 x 1 for siemen-s adapter; M27 x 1 for siemen-s adapter; M27 x 1 for bosc-h injector nozzle adaptor
- DIESEL INJECTOR EXTRACTOR MASTER SET - 3 Different slide hammers: 1.6 kg, 160 mm; 2.7 kg, 460 mm; 5.1 kg, 600 mm; 2 Pulling claws with fork opening: 13.7 x 18 mm, 105 mm;12.7 x 19 mm, 130 mm; 5 Slotted 6-pt 1/2 sockets, 100 mm length; sizes 25 - 27 - 28 - 29 - 30 mm; Injector extractor, sleeve design, with shells: outer diameter 35 mm; internal diameter 29 mm, M17 x 1.0 spindle; pulling adapter with external thread
- HIGH QUALITY CARBON STEEL - The diesel injector extractor set are composed of high-quality carbon steel, which is treated at high temperature throughout the whole process and has a long service life. It is suitable for quickly and safely disassembling the fuel nozzles
- PERFECT KIT FOR YOU - maXpeedingrods diesel injector puller kit is very suitable for professional machinist or DIY enthusiast
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 5.51 x 25.20 x 16.93 inches | Weight: 47.18 pounds
See On Amazon #10
JDMSPEED New Injector Sleeve Cup Removal Installation Tool Kit F4TZ9F538A Replacement For Ford 1994-2003
Asin: B07NWG5V85 | Model: F4TZ9F538A, 1814376C1, ZTSE4303 | PartNumber: F4TZ9F538A, 1814376C1, ZTSE4303 | Ean: 0711766876272 | UPC: 711766876272
Small Enough To Enable You To Change Even The Hard To Get At Cups At The Rear Of The Engine.
Package Include: 1X Fuel Injector Sleeve Installer, 1X Fuel Injector Sleeve Remover, 8X Injector Cup Sleeve Plug, 8X F4tz-9F538-A Sleeve, 8X Injector O-Ring Kit, 2X Brushes.
Easy To Install: The Injector Tool Helps In Installing The Injector Cups,And Does Not Damage The Cup In The Process.
Replace Part Number: Injector Cup Oem Number: F4tz9f538a, 1814376C1, F4tz-9F538-A; Injector O-Rings Oem Number: Xc3z9229ab, Xc3a-9229-Ab, 1833564C92, 1823492C97, F8tz9229aa, 1833564C91, Cm5010.
Injector Sleeve Cup Removal Installation Tool Kit Fitment: Replacement For Ford E-Series 7.3L 1994-2003; Replacement For Ford F-Series 7.3L 1994-2003; Replacement For Ford Excursion 7.3L 1994-2003; Replacement For Ford Powerstroke 7.3L 1994-2003; Replacement For Ford Navistar T444e, Dt466e 1994-2003; Replacement For Ford Caterpillar 3126, 3126B, 3126E Diesel Engines 1994-2003.
It Will Stay Sharp And You Can Use This Tool Hundreds Of Times.
This Job Can Be Done With The Cylinder Heads On, Works Great.
Features
- High Speed Steel Tap Used in The Removal Tool Is the Highest Quality Available
- This Job Can Be Done with The Cylinder Heads On, Works Great
- Small Enough to Enable You to Change Even the Hard To Get At Cups At The Rear Of The Engine
- It Will Stay Sharp and You Can Use This Tool Hundreds of Times
- Replace Part Number: Injector Cup OEM Number: F4TZ9F538A, 1814376C1, F4TZ-9F538-A; Injector O-rings OEM Number: XC3Z9229AB, XC3A-9229-AB, 1833564C92, 1823492C97, F8TZ9229AA, 1833564C91, CM5010
- Injector Sleeve Cup Removal Installation Tool Kit Fitment: Replacement For Ford E-Series 7.3L 1994-2003; Replacement For Ford F-Series 7.3L 1994-2003; Replacement For Ford Excursion 7.3L 1994-2003; Replacement For Ford Powerstroke 7.3L 1994-2003; Replacement For Ford Navistar T444E, DT466E 1994-2003; Replacement For Ford Caterpillar 3126, 3126B, 3126E Diesel Engines 1994-2003
- Package Include: 1x Fuel Injector Sleeve Installer, 1x Fuel Injector Sleeve Remover, 8x Injector Cup Sleeve Plug, 8x F4TZ-9F538-A Sleeve, 8x Injector O-Ring Kit, 2x Brushes
- Easy to Install: The injector tool helps in installing the injector cups,and does not damage the cup in the process
- See more on Amazon...
Brand: JDMSPEED | Manufacturer: JDMSPEED
Weight: 3.64 pounds
See On Amazon #11
HiSport Fuel Injector Micro Filter Repair and Removal Tool
Asin: B09G2YM14P
[Compatibility] - This Fuel Injector Filter Tool Used For Any Type Of Top Of Side Feed Fuel Injector Filter.
[Post Service] - After Receiving The Product, You Can Consult Us How To Install, Will Offer You The Most Patient Answer.
[High Control Quality] - All Tools Are Benches Tested In-House Before Packaging And Shipment To Our Customers, Your Satisfaction Is Our Best Premium, We Want To Deliver You A Quality And Safe Product.
[Product Information] - Use The High Quality Abs Plastic Material,Dimension: 8 Cm, Pack Into 2 Pcs/Set.2 Removal Tools Are Suitable For Different Sizes Of Filters, Suitable For Most Filter Removal Functions.
Features
- [INSTALLATIONS] - Easy to install ! This tool allow you to easily remove the filters from your Top Feed Injectors on one side while providing you with an installation surface to safely install newly purchased filters on the other
- [PRODUCT INFORMATION] - Use the high quality ABS plastic material,dimension: 8 cm, pack into 2 pcs/set.2 removal tools are suitable for different sizes of filters, suitable for most filter removal functions
- [COMPATIBILITY] - This fuel injector filter tool used for any type of Top of Side Feed Fuel Injector Filter
- [HIGH CONTROL QUALITY] - All tools are benches tested in-house before packaging and shipment to our customers, your satisfaction is our best premium, we want to deliver you a quality and safe product
- [POST SERVICE] - After receiving the product, you can consult us how to install, will offer you the most patient answer
- See more on Amazon...
Brand: HiSport | Manufacturer: HiSport
See On Amazon #12
ReluxGO Diesel Injector Puller Tool with Slide Hammer, Common Rail Injector Remover w/ M8, M12, M14 Thread Adapter
Asin: B0CWNQQBWX | Model: BJS071 | PartNumber: BJS071
Great For Bosch And Lucas Injectors: This Kit Includes A 7-Inch (178 Mm) Bar And A 1.3 Lb. (.6 Kg) Slap Hammer Weight Along With M8, M12, M14 Thread Adapters; This Injector Puller Tool Assists In Removing Stubborn Bosch And Lucas Diesel Injectors; Adaptors And Slide Hammer Are Stored In A Convenient Plastic Box For Storage And Travel.
Easy To Use: To Use, First Attach The Tool To The Injector You Wish To Remove, Then Yank The Weight Towards The Handle To Give An Extra Snap Of Weight To The Stuck Part; The Force Transfers To The Shaft, Pulling The Attached End And Injector In The Desired Direction; Repeat Action Until The Part Is Removed; Always Work With A Cold Engine To Avoid Damage And Remember To Replace All Injectors As A Set To Keep Engine Balanced.
Steady Construction: Made Of A Strong, Durable Steel, This Automotive Hammer Puller Tool Is Sure To Pull Even The Toughest Fuel Injectors From Tight Positions; This Remover Kit Has A Steel Rod With Two Threaded Ends; The Durable Metal Helps To Increase Pulling Strength And Force While Also Providing Longevity For The Tool.
Replacing Old Injectors: Fuel Injectors Are Important As They Are What Injects Fuel Directly Into The Cylinder, But Because Of Their Continuous Use, They Are Prone To Cracks, Breaks, And Minor Physical Wear; Symptoms Of This Issue Can Range From Rough Engine Idle, Slow Acceleration, Misfire, Bad Gas Mileage, To Gas Leaks; This Fuel Injector Tool Helps To Easily Remove Injectors For Testing And Cleaning As Well As Replacement.
Features
- INJECTOR REMOVAL TOOL: The ReluxGo Diesel Fuel Injector Slide Puller is designed for removing stuck common-rail diesel injectors quickly and safely without dismantling the cylinder head for injector nozzle cars; The injector remover kit contains a 1.3-pound (.6 kg) shop hammer weight and M8, M12, M14 adapters
- REPLACING OLD INJECTORS: Fuel injectors are important as they are what injects fuel directly into the cylinder, but because of their continuous use, they are prone to cracks, breaks, and minor physical wear; Symptoms of this issue can range from rough engine idle, slow acceleration, misfire, bad gas mileage, to gas leaks; This fuel injector tool helps to easily remove injectors for testing and cleaning as well as replacement
- GREAT FOR BOSCH AND LUCAS INJECTORS: This kit includes a 7-inch (178 mm) bar and a 1.3 lb. (.6 kg) slap hammer weight along with M8, M12, M14 thread adapters; This injector puller tool assists in removing stubborn Bosch and Lucas diesel injectors; Adaptors and slide hammer are stored in a convenient plastic box for storage and travel
- STEADY CONSTRUCTION: Made of a strong, durable steel, this automotive hammer puller tool is sure to pull even the toughest fuel injectors from tight positions; This remover kit has a steel rod with two threaded ends; The durable metal helps to increase pulling strength and force while also providing longevity for the tool
- EASY TO USE: To use, first attach the tool to the injector you wish to remove, then yank the weight towards the handle to give an extra snap of weight to the stuck part; The force transfers to the shaft, pulling the attached end and injector in the desired direction; Repeat action until the part is removed; Always work with a cold engine to avoid damage and remember to replace all injectors as a set to keep engine balanced
- See more on Amazon...
Brand: ReluxGo | Manufacturer: BJS071
Warranty: NO
See On Amazon #13
6 Pack Hydraulic Seal Installation Tools, Hydraulic Cylinder Piston Repair Rebuild Seal Kit, U-Cup Rod Seal Installation Tool Kits Upgraded Super Strong Seal Twistor Install Tool Set
Asin: B0BZNPPBBN | Model: XKYYGGJ6JT-US-1 | PartNumber: XKYYGGJ6JT-US-1
【Expertly Made & Superior Quality】 Comfortable Rubber Handle Cover Design To Avoid Slippage. Frosted Material For Enhanced Friction. 4 Different Colors For Easy Identification Of Different Sizes. Strong Welds And And Well-Polished Edges Provide Smooth Operation And Great Protection For Both Seal And Cylinder. Considerate Block Handle Holder, Easy To Screw Into Your Work Bench For Help On Tough Seals..
【100% Satisfaction Guarantee】 Your Satisfaction Is Our Priority. We Strive To Give Our Customers Excellent Service. All Sixcow Products Support 30-Day Money-Back Guarantee, 12-Month Warranty For Quality-Related Issues. Simply Return It For Your Warranty..
【Widely Used】U-Cup Twistor Installation Tool Is Ideal For Installing Automotive Marine Hydraulic Cylinders, O-Rings, Bucket Cylinder Inner Seals, Auto Cars Ship Inner Flexible Rod Seals, Loaders, Backhoes, Skid Steers, Etc.
【Efficient Work】 Fast And Simple To Install, Impossible To Mess Up. Simply Put The Handle Into Block, Place The Seal On The Claw, Smoothly Rotate The Arm Of Hydraulic Tool To Bend Seal To A Kidney Bean Shape And Insert Seal To Cylinder Groove. 2-Sided Seal Pick. Full Hook For Piercing Seals And Pulling Out Of Bores. Combination Pick For Working Carefully Around Seals And Leveraging Out. Slight Variation Of 90° Pick Has Two Bends. One Bend To Offset It. 2’’ And Another Bend To Go Out And Forward..
Features
- Universal Compatibility 4 Size Hydraulic Seal Installers with Surface Mountable Twistor Handle Block and 2-Angles Seal Pick Multitool is a quick, safe and complete installation tool for flexible rod seals. 4 sizes to cover most rod seal installation job from 0.7" up (Rod Diameters): (XS) 20-30mm (0.7 -1.187 Rod) gland hole; (S) 30-50mm (1.187"-2" Rod) gland hole; (M) 50-70mm (2-2.75" Rod) gland hole; (L) 70-165mm (2.75"-6.5" Rod) gland hole.
- Efficient Work Fast and simple to install, impossible to mess up. Simply put the handle into block, place the seal on the claw, smoothly rotate the arm of Hydraulic tool to bend seal to a Kidney Bean shape and insert seal to cylinder groove. 2-sided seal pick. Full Hook for piercing seals and pulling out of bores. Combination Pick for working carefully around seals and leveraging out. Slight variation of 90 pick has two bends. One bend to offset it. 2 and another bend to go out and forward.
- Expertly Made & Superior Quality Comfortable rubber handle cover design to avoid slippage. Frosted material for enhanced friction. 4 different colors for easy identification of different sizes. Strong welds and and well-polished edges provide smooth operation and great protection for both seal and cylinder. Considerate block handle holder, easy to screw into your work bench for help on tough seals.
- Widely Used U-Cup twistor installation tool is ideal for installing automotive marine hydraulic cylinders, O-rings, bucket cylinder inner seals, auto cars ship inner flexible rod seals, loaders, backhoes, skid steers, etc
- 100% Satisfaction Guarantee Your satisfaction is our priority. We strive to give our customers excellent service. All Sixcow products support 30-Day money-back guarantee, 12-Month warranty for quality-related issues. Simply return it for your warranty.
- See more on Amazon...
Brand: sixcow | Manufacturer: sixcow
Warranty: 30-Day money-back guarantee, 12-Month warranty for quality-related issues
See On Amazon #14
E-cowlboy 9U-6891 Injector Sleeve Cup Remover&Installer Set for CAT Caterpillar 3406E C10 C12 C15 C16 C-18 Engine Heavy Duty Steel (6 PCS)
Asin: B07SGPX2ZB | Model: HG-1547 | PartNumber: HG-1547 | Ean: 7426999800040
Benefits — Used To Install And Remove Injector Sleeves. Works In A Easier Way To Save Your Time And Money..
100% Satisfaction Guarantee — If You're Not 100% Satisfied With Our Tools, Simply Return It For A Full Refund In 30 Days. Support 12 Months’ Warranty. Professional & Sincere Service Allows You To Take No Risks To Purchase In E-Cowlboy!.
Includes 6 Tools — 9U6877 Thrust Bearing / 9U7258 Driver Cap / 221-9778 Puller Stud / 4K-0367 Nut - Full / 5P-8247 Hard Washer /128-7889 Puller Bridge..
Superior Quality — Advanced Heavy Duty Steel Process, Durability, Anti-Corrosion, High Precision And Hardness To Provide A Much Longer Service Life..
Features
- Great Compatibility Works on Caterpillar (CAT) C-10,C-12,C-15,C-16,C-18 and 3406E Engines. (The new puller bridge can be used on all three engines)
- Superior Quality Advanced heavy duty steel process, durability, anti-corrosion, high precision and hardness to provide a much longer service life.
- Benefits Used to install and remove injector sleeves. Works in a easier way to save your time and money.
- Includes 6 Tools 9U6877 Thrust Bearing / 9U7258 Driver Cap / 221-9778 Puller Stud / 4K-0367 Nut - Full / 5P-8247 Hard Washer /128-7889 Puller Bridge.
- 100% Satisfaction Guarantee If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Support 12 months Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!
- See more on Amazon...
Brand: E-cowlboy | Manufacturer: E-cowlboy
See On Amazon #15
Yuesstloo Fuel Injector Removal Tool, Injector Slid Hammer Puller, Compatible with BMW N14 N18 N20 N26 N53 N54 N55 N63 S63
Asin: B0B6NR5T96
Easy To Operate. Just Use The Puller Connection Fuel Injector, And Pull The Slide Hammer, You Can Remove The Injector Easily, Make The Job Effective..
All Items Will Be Checked Carefully And Packaged In Good Condition. If There Is Some Problem With Our Products, You Can Get Help From Us..
Made Of High-Quality Material, With High Hardness, Strong And Not Easy To Break..
The Injector Puller Is Compatible With Bmw N14 N18 N20 N26 N53 N54 N55 N63 S63 Engine..
Features
- Yuesstloo Fuel Injector Removal Tool is used to pull injector and remove injector.
- The injector puller is compatible with BMW N14 N18 N20 N26 N53 N54 N55 N63 S63 engine.
- Easy to operate. Just use the puller connection fuel injector, and pull the slide hammer, you can remove the injector easily, make the job effective.
- Made of high-quality material, with high hardness, strong and not easy to break.
- All items will be checked carefully and packaged in good condition. If there is some problem with our products, you can get help from us.
- See more on Amazon...
Brand: Yuesstloo | Manufacturer: Yuesstloo
See On Amazon #16
Injector Cup Nozzle Tube Remover and Installer Tool For Detroit Diesel DD13 DD15 DD16 Heavy Duty Alternative to OEM J-47388-A W470589000700 MH064002
Asin: B087BLVTLH | Ean: 7427046760102
Upgrade Design — This Tool Is Used To Remove And Replace The Injector Cups / Tube / Nozzle And Works In An Easier Way To Save Your Time And Money..
100% Satisfaction Guarantee — If You're Not 100% Satisfied With Our Tools, Simply Return It For A Full Refund In 30 Days. Support 12 Months’ Warranty. Professional & Sincere Service Allows You To Take No Risks To Purchase In Desieltoolsonline!.
Special Features — Directly Replaces Oem Part: W470589000700, Mh064002 And J-47388-A..
Superior Quality — Premium Grade Heavy Duty Hard Steel With Black Oxide Finished, Durability, Strong And Anti-Corrosion. High Precision And Hardness To Provide A Much Longer Service Life..
Features
- Great Compatibility Works on Detroit Diesel / Mercedes Benz Trucks DD13, DD15, and DD16.
- Superior Quality Premium grade heavy duty hard steel with black oxide finished, durability, strong and anti-corrosion. High precision and hardness to provide a much longer service life.
- Upgrade Design This tool is used to remove and replace the injector cups / tube / nozzle and works in an easier way to save your time and money.
- Special Features Directly replaces OEM Part: W470589000700, MH064002 and J-47388-A.
- 100% Satisfaction Guarantee If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Support 12 months Warranty. Professional & Sincere Service allows you to take no risks to purchase in Desieltoolsonline!
- See more on Amazon...
Brand: E-cowlboy | Manufacturer: E-cowlboy
See On Amazon #17
QDZCZY Injector Sleeve Cup Removal Install Tool Replacement for 1994-2003 E-Series/F-Series 7.3L 1833564C92 E541-73TK F4TZ9F538A
Asin: B0CR143B5H
Easy Replacement The Job Can Be Done On The Cylinder Head, And The Sleeve Cup Tool Is Compact, Making It Easier To Replace Hard-To-Reach Cups At The Back Of The Engine.
Socket Tool Material Made Of High Quality Steel With Polished Surface, The Surface Will Have Slight Wear Due To The Process. It Is Not A Quality Problem.
Machining Process Steel Wire Taps Used In Disassembly Tools Is Machined.This One Is Much Sharper And More Durable.
Part Numbers E541-73Tk, Xc3z9229ab, 1833564C92, F4tz-9F538-A, F4tz9f538a, 1814376C1.
Features
- Replacement for 1994-2003 F-Series 7.3L, 1994-2003 E-Series 7.3L, 1994-2003 Powerstroke 7.3L
- Part Numbers E541-73TK, XC3Z9229AB, 1833564C92, F4TZ-9F538-A, F4TZ9F538A, 1814376C1
- Easy Replacement The job can be done on the cylinder head, and the sleeve cup tool is compact, making it easier to replace hard-to-reach cups at the back of the engine
- Machining Process Steel wire taps used in disassembly tools is machined.This one is much sharper and more durable
- Socket Tool Material Made of high quality steel with polished surface, the surface will have slight wear due to the process. It is not a quality problem
- See more on Amazon...
Brand: QDZCZY | Manufacturer: QDZCZY
See On Amazon #18
6778 Injector Puller & 6779 Injector Puller, 7222 Injector Tube Remover/Installer Tools for GM 6.6L Duramax Diesel, Replace J-44639, J-4659, J-45910
Asin: B08222BKNX | Ean: 7426999807612
Function --7222 Injector Tube Remover Specially Designed To Remove The Injector Tube For Maintenance And Reinstallation. 6778 & 6779 Injector Puller Used To Safely Pull The Injector From The Cylinder Head Without Pulling The Injector Cup..
Guarantee -- Aiming To Give Our Customers The Best Products And Services, We Provide Friendly 1-Year’S Warranty Support And Easy-To-Reach Customer Service To Make Sure Your Investment!.
Material -- All Parts Made Of Steel With Solid And Sturdy, Surface Black Coated To Ensure Resistance To Corrosion And Rust, Protection, Years Of Trouble-Free Use And Continue To Perform As Designed..
Replacement -- 7222 Injector Tube Remover Is The Same As J-45910 In Function And Performance. 6778 Injector Puller Similar To J-46594. 6779 Similar To J-46594. For A Simple Repair Or The Most Complex Drivability Concern, 6778 & 6779 Injector Puller And 7222 Injector Tube Remover/Installer Tools Solve Problems Faster, And At Better Value..
Features
- FITMENT -- 7222 Injector Tube Remover fits for GM 6.6L Duramax Diesel, 2001-2021. 6778 Injector Puller for GM Duramax 6.6L engines 2001-2004. 6779 Injector Puller for GM Duramax 6.6L engines 2005-2011.
- REPLACEMENT -- 7222 Injector Tube Remover is the same as J-45910 in function and performance. 6778 Injector Puller similar to J-46594. 6779 similar to J-46594. For a simple repair or the most complex drivability concern, 6778 & 6779 Injector Puller and 7222 Injector Tube Remover/Installer Tools solve problems faster, and at better value.
- FUNCTION --7222 Injector Tube Remover specially designed to remove the injector tube for maintenance and reinstallation. 6778 & 6779 Injector Puller used to safely pull the injector from the cylinder head without pulling the injector cup.
- MATERIAL -- All parts made of steel with solid and sturdy, surface black coated to ensure resistance to corrosion and rust, protection, years of trouble-free use and continue to perform as designed.
- GUARANTEE -- Aiming to give our customers the best products and services, we provide friendly 1-year s warranty support and easy-to-reach Customer Service to make sure your investment!
- See more on Amazon...
Brand: Yoursme | Manufacturer: Yoursme
See On Amazon #19
Bentolin Injector Sleeve Cup/Seat/Bore Cleaning Brush Kit Replace AP0084 AP0085 3252 Compatible For 1994~2018 Ford Powerstroke 6.0L 6.4L 6.7L 7.3L, Caterpillar 3126 C7 C9 / Navistar/Maxxforce
Asin: B086PRSBQM | Ean: 6190429742453
Includes 1X Stainless Steel Spiral Tube Brush And 1X Stainless Steel Flat Bottom Brush. This Complete Injector Brush Kit Should Be A Necessity For Anyone Pulling And Swapping Injectors..
Compatibility — Works On 4.5L Lcf 6.0L 6.4L 6.7L And 7.3L Powerstroke / Caterpillar(Cat) 3126 C7 C9 / Navistar T444e Dt466 Vt365 Vt275 / Maxxforce 5/7/Dt/9/10/N9/N10 / Gm / Chevrolet 6.6L / Dodge Cummins 5.9L 6.7L / Fit For John Deere 4.5L 6.8L 8.1L 9.0L Hpcr / Isuzu 4Hk1 6Hk1 Hpcr..
Cleaning Carbon Deposits And Dirt Out Of Injector Seats, Bores, And Cups Without Damage, This Brush Kit Makes Cleaning Easier And Prolong The Life Of Your Injector Sleeve.
Upgrade Design — Removing Carbon Deposits, Rust, Dirt And Other Debris From Injector Seats, Bores, And Cups Without Damage. Surfaces Are Cleaned And Polished To Insure Good Seating And Sealing. Make The Job Easier To Save Your Time And Money..
Features
- Superior Quality Premium grade wear-resistant stainless steel, high strength and toughness, anti-corrosion and never rust. Comfortable ABS plastic handle to keep stable and safe. Provide a much longer service life.
- Upgrade Design Removing carbon deposits, rust, dirt and other debris from injector seats, bores, and cups without damage. Surfaces are cleaned and polished to insure good seating and sealing. Make the job easier to save your time and money.
- Includes 1x Stainless Steel Spiral Tube Brush and 1x Stainless Steel Flat Bottom Brush. This complete injector brush kit should be a necessity for anyone pulling and swapping injectors.
- Cleaning carbon deposits and dirt out of injector seats, bores, and cups without damage, this brush kit makes cleaning easier and prolong the life of your injector sleeve
- Compatibility Works on 4.5L LCF 6.0L 6.4L 6.7L and 7.3L Powerstroke / Caterpillar(CAT) 3126 C7 C9 / Navistar T444E DT466 VT365 VT275 / MaxxForce 5/7/DT/9/10/N9/N10 / GM / Chevrolet 6.6L / Dodge Cummins 5.9L 6.7L / fit for John Deere 4.5L 6.8L 8.1L 9.0L HPCR / Isuzu 4HK1 6HK1 HPCR.
- See more on Amazon...
Brand: Bentolin | Manufacturer: AM-World
See On Amazon #20
E-cowlboy 9U-6891 Injector Sleeve Remover Installer Set+9U-7227 Injector Height Tool+J-38587-a Engine Barring Socket for CAT Caterpillar 3406E C-15 C-16 Engines (8 PCS)
Asin: B081RBCZYS | Model: HG - 3406 | PartNumber: HG - 3406 | Ean: 7427046756273
Benefits — Used To Install And Remove Injector Sleeves. Easily & Precisely Adjust The Injector Height Of The Engine And Easy To Rotate The Engine..
100% Satisfaction Guarantee — If You're Not 100% Satisfied With Our Tools, Simply Return It For A Full Refund In 30 Days. Support 12 Months’ Warranty. Professional & Sincere Service Allows You To Take No Risks To Purchase In E-Cowlboy!.
Include 8 Tools — 9U6877 Thrust Bearing / 9U7258 Driver Cap / 221-9778 Puller Stud / 4K-0367 Nut - Full / 5P-8247 Hard Washer /128-7889 Puller Bridge / 9U-7227 Injector Height Tool / J-38587-A Engine Barring Socket..
Superior Quality — Advanced Precision Machined Out Of Aircraft Grade Billet Aluminum And Heavy Duty Steel Process, Durability, Anti-Corrosion And Anti-Rust. High Precision And Hardness To Provide A Much Longer Service Life..
Features
- Great Compatibility Works on Caterpillar (CAT) 3406E / C-15 / C-16. Essential tool kit for engine operation to save your time and money!
- Superior Quality Advanced precision machined out of aircraft grade billet aluminum and heavy duty steel process, durability, anti-corrosion and anti-rust. High precision and hardness to provide a much longer service life.
- Benefits Used to install and remove injector sleeves. Easily & Precisely adjust the Injector Height of the engine and easy to rotate the engine.
- Include 8 Tools 9U6877 Thrust Bearing / 9U7258 Driver Cap / 221-9778 Puller Stud / 4K-0367 Nut - Full / 5P-8247 Hard Washer /128-7889 Puller Bridge / 9U-7227 Injector Height Tool / J-38587-A Engine Barring Socket.
- 100% Satisfaction Guarantee If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Support 12 months Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!
- See more on Amazon...
Brand: E-cowlboy | Manufacturer: E-cowlboy
See On Amazon
Looking For Something Else?
Search