NanoVna SAA-2N VNA Antenna Analyzer,SEESII 50KHz -3GHz Vector Network Analyzer with Bag & Testboard Kit,4" inch LCD,HF VHF UHF Measuring S Parameters, Voltage Standing Wave Ratio Smith Chart
Asin: B08H4NFZZ2 | Ean: 6933834700584
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Improved Frequency Range】:Transmission Mearsure S21: 70Db(50Khz-1.5Ghz), 60Db(1.5Ghz-3Ghz). Reflection Measure S11: -50Db(50Khz-1.5Ghz), -40Db(1.5Ghz-3Ghz); Antenna Analyzer: 1.005(50Khz - 1.5Ghz), 1.02(1.5Ghz-3Ghz).
【What You Can Get】1X Nanovna Saa-2N Vna, 1X Micro Usb Data Cable,2X 500Mm N-Type Male To Male Rg142-Pur Rf Cable,1X N-Type Male Calibration Kit-Open,1X N-Type Male Calibration Kit-Short,1X N-Type Male Calibration Kit-Load,1X N-Type Female To Female Connector,1X Eva Storage Bag, 1X Touching Screen Pen And Lanyard,1X Testboard ,1X Accessories Kit, 2X 12 Hours Services.
【 Improved Performance】High Stability, High Sensitivity, High Precision, Improved Performance.Made Of High-Quality Aluminum Protective Case, Strong Practicability And Long Service Life.Bulit-In 3000Mah Rechargeable Battery,Usb Powered.
【Calibration 】The Saa-2N/Nanovna_V2.2 Does Not Load The Initial Calibration Data At Startup, And Does Not Automatically Interpolate The Calibration Data After The User Changes The Frequency, And Must Recalibrate Or Recall The Calibration Data (Previously Saved Data) After Each Startup And Frequency Change. Please Read The User Manual Carefully Before Use To Avoid Damaging The Device..
Features
- Upgraded NanoVNA SAA-2N V2.2 Version Not only testing standing wave impedance of the antenna, can also debug the duplexer, the insertion loss of the filter, the isolation and testing the attenuation of the cable, shorten the coefficient, the phase, the amplification of the antenna amplifier.4.0 inch touch screen make it easier for you to read data and test
- Calibration The SAA-2N/NanoVNA_V2.2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or recall the calibration data (previously saved data) after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device.
- Improved Frequency Range :transmission Mearsure S21: 70dB(50KHz-1.5GHz), 60dB(1.5GHz-3GHz). Reflection Measure S11: -50dB(50KHz-1.5GHz), -40dB(1.5GHz-3GHz); Antenna Analyzer: 1.005(50KHz - 1.5GHz), 1.02(1.5GHz-3GHz)
- Improved Performance High stability, high sensitivity, high precision, improved performance.Made of high-quality aluminum protective case, strong practicability and long service life.Bulit-in 3000mAh rechargeable battery,USB powered
- What You Can Get 1x NanoVNA SAA-2N VNA, 1x Micro USB Data Cable,2x 500mm N-type Male to Male RG142-PUR RF Cable,1x N-type Male Calibration Kit-OPEN,1x N-type Male Calibration Kit-SHORT,1x N-type Male Calibration Kit-LOAD,1x N-type Female to Female Connector,1x EVA Storage Bag, 1x Touching Screen Pen and Lanyard,1x Testboard ,1x Accessories Kit, 2x 12 hours services
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
See On Amazon Similar To NanoVna SAA2N VNA Antenna AnalyzerSEESII
#1
[Upgraded] AURSINC NanoVNA-H Vector Network Analyzer 10KHz -1.5GHz Latest HW Version 3.6 | HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart
Asin: B07Z5VY7B6 | Model: NanoVNA-H Vector Network Analyzer | PartNumber: NanoVNA-H Vector Network Analyzer
[Multiple Functions] The Default Firmware Main Function Is Used For Antenna Performance Measurement. The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters. If You Need To Obtain S12 And S22, You Need To Manually Replace The Transceiver Port Wiring. The Ch0 Output Level Is Increased To 0Dbm When Using The Fundamental Wave, Resulting In More Accurate Reflection Measurement.
[Strong And Secure Power Supply] This Vna Is Battery Powered Or Usb Powered. Built In 650Mah Battery, Could Work For 2 Hours Continuously. For Longer Measurement Time, Kindly Connect An External Power Source. The Product Interface Displays Battery Usage, Providing A Clear Understanding Of The Power Status.
[Support Android Phone & Pc Softsare Control] Designed A Practical And Simple Control Application On Pc, You Can Download Touchstone(Snp) Files For Radio Design And Simulation Software. There Is A Pc Interface That Adds Functionality And Lets You Work Interactively On A Bigger Screen. Supports Time Domain Analysis Function (Tdr). Compatible With Most Android Mobile Phones, Convenient For Connecting To Mobile Phones. Support Windows Computer Control.
[Improved Frequency Algorithm] The Improved Frequency Algorithm Can Use The Odd Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz. The 50K-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic, The Extended 300M-900Mhz Band Provides Better Than 60Db Of Dynamics, And The 900M-1.5Ghz Band Is Better Than 40Db Of Dynamics.
Features
- [UPGRADED NanoVNA-H] New HW Version V3.6. It is upgradeable as new firmware is developed. With MicroSD card port now can have the measurement data or the screenshots saved in the it at anytime. Added battery circuit management, more secure. Redesigned PCB, you can connect to mobile phone with Type C-Type C cable (original PCB needs OTG cable), see a clear HD image on your phone. Added a ABS case, which is protective and dust-proof. Disply: 2.8 inch TFT (320 x240)
- [IMPROVED FREQUENCY ALGORITHM] The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
- [MULTIPLE FUNCTIONS] The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring. The CH0 output level is increased to 0dBm when using the fundamental wave, resulting in more accurate reflection measurement
- [SUPPORT ANDROID PHONE & PC SOFTSARE CONTROL] Designed a practical and simple control application on PC, you can download touchstone(SNP) files for radio design and simulation software. There is a PC interface that adds functionality and lets you work interactively on a bigger screen. Supports time domain analysis function (TDR). Compatible with most Android mobile phones, convenient for connecting to mobile phones. Support Windows Computer Control
- [STRONG AND SECURE POWER SUPPLY] This VNA is battery powered or USB powered. Built in 650mAh battery, could work for 2 hours continuously. For longer measurement time, kindly connect an external power source. The product interface displays battery usage, providing a clear understanding of the power status
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
See On Amazon #2
SEESII Nanovna-H Vector Network Analyzer,Upgraded HW3.6 10KHz-1.5GHz MF HF VHF UHF Antenna Analyzer, Measuring S Parameters, Voltage Standing Wave Ratio,Phase,Delay,Smith Chart,Support Data Storage
Asin: B08132DJLS | Model: NanoVNA-H | PartNumber: NanoVNA-H | Ean: 0889251491337 | UPC: 889251491337
✅ 【Multi Tx/Rx Function】:The Default Firmware Is Mainly Used For Antenna Performance Measurement. The Tx/Rx Method Can Measure The Complete S11/S21 Parameters (Need To Manually Replace The Transceiver Port Wiring)..
✅ 【Built-In Micro-Sd Port & Time Display】: The Lastest Antenna Analyzer With Microsd Card Port,So You Can Save Field Test Data Or Screens To A Microsd Card At Any Time,Support Up To 32Gb Memory Card. (Not Include In The Pacakge).In Addition, Different From Old Version Nanovnas, The Date And Time Can Be Customized, Which Is Convenient For You To Further Record And Save Data..The Default Firmware Main Function Is Used For Antenna Performance Measurement..
🎁【Abundant Accessories】:Come With 1X Nanovna-H Host, 2X 30Cm Sma Male To Male Rg174 Rf Cable, 1X Sma Female To Female Connector,1X Sma Short,Open &Load Simple Calibration Kit,1X Usb Type-C Data Cable, 1 X Usb-C To Usb-C Line, 1X Lanyard And Touch Plectrum. All The Accessories Are Packaged In A Sophisticated Box.This Is Perfect Vna Analyzer For Your Own Use Or As A Gift For Your Friend..
✅ 【Android Phone & Pc Software Control】:The Nanovna Analyzer Uses Pc Software Nanovnasaver, It Can Connect To A Nanovna And Extracts The Data For Display On A Computer For Saving To Touchstone Files. We Can Export Touchstone (Snp) Files For Various Radio Design And Simulation Software Through Pc Software.We Can Export Touchstone (Snp) Files For Various Radio Design And Simulation Software Through Pc Software.In Addition,The Vna Support Usb-C To Usb-C Line, More Convenient To Connect To Mobile Phones. It Is Compatible With Most Android Phones With The Same Screen Display (Doesnt Support For Iphone)..
✅ 【Improved Frequency Algoruthm】: The Improved Frequency Algorithm Can Use The Odd Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz. The Metal Shield Is Designed To Reduce The External Interference And Improve The Measurement Accuracy. The 50K-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic, The Extended 300M-900Mhz Band Provides Better Than 60Db Of Dynamics, And The 900M-1.5Ghz Band Is Better Than 40Db Of Dynamics.The Default Firmware Main Function For Vector Network Analyzer Is Used For Antenna Performance Measurement..
Features
- Upgraded Nanovna-H HW3.6 : SeeSii Nanovna-H Vector Network Analyzer is developed by Hugen. With latest 3.6 version,10KHz-1.5GHz measure range,2.8 inch LCD touchscreen,mini and portable design.This Antenna Analyzer is provides outstanding vector network measurement capabilities and perfect for evaluating antenna resonance and SWR.It is a very mini handy & smart analyzer for electronics engineer, amateur radio operators or radio diy amateurs.
- Improved Frequency Algoruthm : The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The metal shield is designed to reduce the external interference and improve the measurement accuracy. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics.The default firmware main function for vector network analyzer is used for antenna performance measurement.
- Multi TX/RX Function :The default firmware is mainly used for antenna performance measurement. The TX/RX method can measure the complete S11/S21 parameters (need to manually replace the transceiver port wiring).
- Android Phone & PC Software Control :The nanovna analyzer uses PC software NanoVNASaver, it can connect to a NanoVNA and extracts the data for display on a computer for saving to Touchstone files. We can export Touchstone (snp) files for various radio design and simulation software through PC software.We can export Touchstone (snp) files for various radio design and simulation software through PC software.In addition,the vna support USB-C to USB-C line, more convenient to connect to mobile phones. It is compatible with most Android phones with the same screen display (doesnt support for iPhone).
- Built-in Micro-SD Port & Time Display : The lastest antenna analyzer with MicroSD card port,so you can save field test data or screens to a MicroSD card at any time,support up to 32GB memory card. (Not include in the pacakge).In addition, different from old version NanoVNAs, the date and time can be customized, which is convenient for you to further record and save data..The default firmware main function is used for antenna performance measurement.
- Abundant Accessories :Come with 1x NanoVNA-H host, 2x 30cm SMA Male to Male RG174 RF Cable, 1x SMA Female to Female Connector,1x SMA SHORT,OPEN &LOAD simple calibration kit,1x USB Type-C Data Cable, 1 x USB-C to USB-C Line, 1x Lanyard and touch plectrum. All the accessories are packaged in a sophisticated box.This is perfect vna analyzer for your own use or as a gift for your friend.
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
Weight: 0.44 Pounds
See On Amazon #3
AURSINC NanoVNA-H4 Vector Network Analyzer, Lastest V4.3 10KHz-1.5GHz HF VHF UHF 4" Touch Screen Nanovna Antenna Analyzer Ham Radio, Measuring S Parameters, SWR, Phase, Delay, Smith Chart
Asin: B083PQ4RXZ
✔️【Antenna Performance Measurement】The Default Firmware Main Function For Vector Network Analyzer Is Used For Antenna Performance Measurement. It Has Good Rf Performance For S-Parameter Measurements As Previous Models. Note: The Nanovna Is Only Compatible With The Low-Speed And Supports Spi Mode Sd Cards For Now. It Is Very Efficient Vector Testing For Ham Radio Operator, Research Electrical Engineer And Antenna Builders.
✔️【What Are Included】1X Nanovna-H4 Host (With 1950Mah Battery), 4Pcs Sma Male Calibration Kit (Open/Short/Load/Sma Female To Female Connector), 2X 16Cm/6.3Inch Sma Male To Male Rg174 Rf Cable, 1X Usb Type-C Data Cable, 1X Type-C To Type-C Cable, 1X Lanyard With Stylus, 1X Stylus Pen, 1X User Manual.
✔️【Pc & Android Control】Using Pc Software Nanovnasaver, Nanovna-H4 Antenna Analyzer Can Connect To A Nanovna And Extracts The Data For Display On A Computer, And For Saving To Touchstone Files. We Can Export Touchstone (Snp) Files For Various Radio Design And Simulation Software Through Pc Software. The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters. If You Need To Obtain S12 And S22, You Need To Manually Replace The Transceiver Port Wiring.
✔️【Improved Frequency Algorithm】The Improved Frequency Algorithm Of Nano Vna H4 Can Use The Odd Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz. The 50K-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic. The Extended 300M-900Mhz Band Provides Better Than 60Db Of Dynamics, And The 900M-1.5Ghz Band Is Better Than 40Db Of Dynamics. Used It To Check Out New Cable Or Antenna Installations And To Routinely Adjust The Rf Tuner For Optimum.
Features
- UPGRADED NANOVNA-H4 V4.3 AURSINC nanovna h4 is a Hugen Origin that provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 4inch LCD display, with 1950mAh battery powered or USB powered. With latest HW 4.3 version, Nanovna-h4 antenna analyzer is added a brand new panel plus added a new SD port for data storage(support up to 32GB memory card, not included in the package)
- IMPROVED FREQUENCY ALGORITHM The improved frequency algorithm of nano vna h4 can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic. The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics. Used it to check out new cable or antenna installations and to routinely adjust the RF tuner for optimum
- ANTENNA PERFORMANCE MEASUREMENT The default firmware main function for vector network analyzer is used for antenna performance measurement. It has good RF performance for S-parameter measurements as previous models. NOTE: the Nanovna is only compatible with the low-speed and supports SPI mode SD cards for now. It is very efficient vector testing for ham radio operator, research electrical engineer and antenna builders
- PC & ANDROID CONTROL Using PC software NanoVNASaver, NanoVNA-H4 antenna analyzer can connect to a NanoVNA and extracts the data for display on a computer, and for saving to Touchstone files. We can export Touchstone (snp) files for various radio design and simulation software through PC software. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring
- WHAT ARE INCLUDED 1x NanoVNA-H4 host (with 1950mAh battery), 4pcs SMA male calibration kit (open/short/load/SMA female to female connector), 2x 16cm/6.3inch SMA male to male RG174 RF cable, 1x USB Type-C data cable, 1x Type-C to Type-C cable, 1x Lanyard with stylus, 1x stylus pen, 1x User Manual
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
See On Amazon #4
Bingfu Dual Band WiFi Antenna 3dBi SMA Male Antenna(2-Pack) for Wireless Vedio Security IP Camera Recorder Surveillance Recorder Truck Trailer Rear View Backup Camera Reversing Monitor
Asin: B09J8Q6TRN | Model: BFN00621 | PartNumber: BFN00621
✅ Compatible With: Wifi Ip Security Camera; Wireless Video Surveillance Dvr Recorder; Truck Rv Van Trail Rear View Camera, Reverse Camera, Backup Camera, Industrial Router Iot Gateway Modem, M2m Terminal, Remote Monitoring And Control, Wireless Video, Wireless Hdmi Extender;.
✅ Tips: It Can Be Used As A 2.4Ghz Bluetooth Antenna For Bluetooth Adapter, Bluetooth Audio Hifi Speaker Music System..
✅ Compatible With: 5Ghz 5.8Ghz Fpv Camera Monitor, Fpv Drone Racing Quadcopeter Controller; 5Ghz 5.8Ghz Wireless Av Video Audio Receiver Hdmi Extender;.
☘ Package List: 2 X Sma Male Antennas.
Features
- Dual Band WiFi: 2.4GHz (2400 - 2485 MHz),5GHz/5.8GHz (5150 - 5850 MHz)
- Package list: 2 x SMA Male Antennas
- Compatible with: WiFi IP Security Camera; Wireless Video Surveillance DVR Recorder; Truck RV Van Trail Rear View Camera, Reverse Camera, Backup Camera, Industrial Router IoT Gateway Modem, M2M Terminal, Remote Monitoring and Control, Wireless Video, Wireless HDMI Extender;
- Compatible with: 5GHz 5.8GHz FPV Camera Monitor, FPV Drone Racing Quadcopeter Controller; 5GHz 5.8GHz Wireless AV Video Audio Receiver HDMI Extender;
- Tips: It can be used as a 2.4GHz Bluetooth Antenna for Bluetooth Adapter, Bluetooth Audio HiFi Speaker Music System.
- See more on Amazon...
Brand: BINGFU | Manufacturer: Bingfu
Dimensions: 4.72 x 6.69 x 0.51 Inches
See On Amazon #5
Upgraded NanoVNA-H4 Vector Network Analyzer, SeeSii Latest V4.3/4.2 10KHz-1.5GHz HF VHF UHF 4" Touch Screen Antenna Analyzer Measures S Parameters,Voltage Standing Wave Ratio, Phase,Delay, Smith Chart
Asin: B085CFHTBM | Model: NanoVNA-H4 | PartNumber: NanoVNA-H4 | Ean: 0889251537400 | UPC: 889251537400
😊【Improved Frequency Algorithm】:The Vector Network Analyzer Can Use The Old Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz. The 50K-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic, The Extended 300M-900Mhz Band Provides Better Than 60Db Of Dynamics, And The 900M-1.5Ghz Band Is Better Than 40Db Of Dynamics.Great For Trouble Shooting Antennas And Improving Performance..
🎁【Abundant Accessories】:Equipped With 1X Nanovna-H4(With 1950Ma-H Battery), 1X Usb Type-C Cable, 2 X 15Cm Sma Male To Male Rg316 Rf Cable, 1X Sma Male Calibration Kit - Open,1X Sma Male Calibration Kit - Short ,1 X Sma Male Calibration Kit - Load,1 X Touchscreen Pen.It's Very Useful As An Antenna Analyzer For Your Ham Station, Easy To Set Without Fancy Calibration. Note: The Function Of The Versions 4.2/4.3 Is The Same, It Will Be Shipped Randomly..
😊【Pc Connection & Tx/Rx Function】:The Vna Analyzer Uses Pc Software Nanovnasaver, It Can Connect To A Nanovna And Extracts The Data For Display On A Computer For Saving To Touchstone Files. We Can Export Touchstone (Snp) Files For Various Radio Design And Simulation Software Through Pc Software.In Addition,The Default Firmware Is Mainly Used For Antenna Performance Measurement. The Tx/Rx Method Can Measure The Complete S11/S21 Parameters (Need To Manually Replace The Transceiver Port Wiring)..
😊【Built-In Micro-Sd Port & Time Display】: The Lastest Antenna Analyzer With Microsd Card Port,So You Can Save Field Test Data Or Screens To A Microsd Card At Any Time,Support Up To 32Gb Memory Card. (Not Include In The Pacakge).In Addition, Different From Old Version Nanovnas, The Date And Time Can Be Customized, Which Is Convenient For You To Further Record And Save Data..The Default Firmware Main Function Is Used For Antenna Performance Measurement..
Features
- 2022 UPGRADED NANOVNA ANALYZER : SeeSii Nanovna-h4 Vector Network Analyzer is developed by Hugen. With latest 4.3 version,10KHz-1.5GHz measure range,4.0 inch LCD touchscreen,mini and portable design.This Antenna Analyzer is provides outstanding vector network measurement capabilities and perfect for evaluating antenna resonance and SWR.It is a very handy & smart analyzer for electronics engineer, amateur radio operators or radio diy amateurs.
- BUILT-IN MICRO-SD PORT & TIME DISPLAY : The lastest antenna analyzer with MicroSD card port,so you can save field test data or screens to a MicroSD card at any time,support up to 32GB memory card. (Not include in the pacakge).In addition, different from old version NanoVNAs, the date and time can be customized, which is convenient for you to further record and save data..The default firmware main function is used for antenna performance measurement.
- IMPROVED FREQUENCY ALGORITHM :The Vector Network Analyzer can use the old harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics.Great for trouble shooting antennas and improving performance.
- PC CONNECTION & TX/RX FUNCTION :The vna analyzer uses PC software NanoVNASaver, it can connect to a NanoVNA and extracts the data for display on a computer for saving to Touchstone files. We can export Touchstone (snp) files for various radio design and simulation software through PC software.In addition,the default firmware is mainly used for antenna performance measurement. The TX/RX method can measure the complete S11/S21 parameters (need to manually replace the transceiver port wiring).
- Abundant Accessories :Equipped with 1x NanoVNA-H4(with 1950mA-h battery), 1x USB Type-C cable, 2 x 15cm SMA male to male RG316 RF cable, 1x SMA male calibration kit - OPEN,1x SMA male calibration kit - SHORT ,1 x SMA male calibration kit - LOAD,1 x Touchscreen pen.It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration. Note: The function of the versions 4.2/4.3 is the same, it will be shipped randomly.
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
Weight: 1.00 pounds
See On Amazon #6
Bingfu Dual Band WiFi 2.4GHz 5GHz 5.8GHz 6dBi SMA Male Antenna (2-Pack) for Wireless Vedio Security IP Camera Recorder Surveillance Recorder Truck Trailer Rear View Backup Camera Reversing Monitor
Asin: B07XFZB62D | Ean: 0790404675231 | UPC: 790404675231
Compatible With: Wifi Ip Security Camera; Wireless Video Surveillance Dvr Recorder; Truck Rv Van Trail Rear View Camera, Reverse Camera, Backup Camera, Industrial Router Iot Gateway Modem, M2m Terminal, Remote Monitoring And Control, Wireless Video, Wireless Hdmi Extender;.
Can Be Used As A 2.4Ghz Bluetooth Antenna For Bluetooth Adapter, Bluetooth Audio Hifi Speaker Music System;.
Compatible With: 5Ghz 5.8Ghz Fpv Camera Monitor, Fpv Drone Racing Quadcopeter Controller; 5Ghz 5.8Ghz Wireless Av Video Audio Receiver Hdmi Extender;.
Package: 2 X Wifi Antenna;.
Features
- Dual Band WiFi: 2.4GHz (2400 - 2485 MHz),5GHz/5.8GHz (5150 - 5850 MHz); Gain: 6dBi; Direction: Omni-directional; Antenna Connector: SMA Male Connector;
- Package: 2 x WiFi Antenna;
- Compatible with: WiFi IP Security Camera; Wireless Video Surveillance DVR Recorder; Truck RV Van Trail Rear View Camera, Reverse Camera, Backup Camera, Industrial Router IoT Gateway Modem, M2M Terminal, Remote Monitoring and Control, Wireless Video, Wireless HDMI Extender;
- Compatible with: 5GHz 5.8GHz FPV Camera Monitor, FPV Drone Racing Quadcopeter Controller; 5GHz 5.8GHz Wireless AV Video Audio Receiver HDMI Extender;
- Can be used as a 2.4GHz Bluetooth Antenna for Bluetooth Adapter, Bluetooth Audio HiFi Speaker Music System;
- See more on Amazon...
Brand: BINGFU | Manufacturer: Bingfu
Dimensions: 0.51 x 4.72 x 6.69 inches
See On Amazon #7
NanoVNA-H4 Vector Network Analyzer with 32GB Card, V4.3 10KHz -1.5GHz Upgraded HF VHF UHF Antenna Analyzer 4" Touch Screen, Voltage Standing Wave Ratio, Phase,Delay, Smith Chart
Asin: B0CJ2D4CZP
【Built-In Micro-Sd Port And Customisable Time】The Latest Design Of This Antenna Analyzer With Microsd Card Port Supports Up To 32Gb Memory Card (Included In Set), So You Can Save Your Field Test Data Or Screen To Microsd Card At Any Time, And The New Feature Of Customisable Date And Time Makes It Convenient For You To Further Record And Save Data..
【Pc Connection & Tx/Rx Function】The Nanovna-H4 Network Analyzer Comes With Pc Connectivity And A Built-In 1950Mah Battery. The Nanovnasave Pc Software Can Be Used To Connect To Nanovna, Extract Data For Display On The Pc And Save To A Touchstone File.The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters. The Tx/Rx Method Can Measure The Complete S11/S21 Parameters (Need To Manually Replace The Transceiver Port Wiring)..
【Improved Frequency Algorithm】Vector Network Analyzer Uses The Direct Output Of The Si5351 To Provide Better Than 70Db Of Dynamics In The 50K-300Mhz Frequency Range, Better Than 60Db Of Dynamics In The Extended 300M-900Mhz Band, And Better Than 40Db Of Dynamics In The 900M-1.5Ghz Band. Si5351 The Old Harmonics Of The Si5351 Are Extended To Support Measurements Up To 1.5Ghz, Making It Ideal For Troubleshooting A Wide Range Of Antennas..
【Latest Upgrade】Nanovna-H4 Vector Network Analyzer Is The Latest Version 4.3 With 4.0 Inch Large Lcd Touch Screen, 10Khz-1.5Ghz Measurement Range, Easy To Use, Compact And Portable, Perfect For Field Work. The Antenna Analyzer Measuring Is Ideal For Evaluating Antenna Resonance And Swr, And Can Be Easily Operated By Electronic Engineers, Amateur Radio Operators Or Radio Diy Enthusiasts After Learning From The Video..
Features
- NanoVNA-H4 Vector Network Analyzer Equipped with 1X NanoVNA-H4 analyzer (with 1950mAh battery), 1X USB Type-C cable, 1X Type-C to Type-C cable, 2 x 15cm SMA male to male RG316 RF cable, 1x SMA male calibration kit - OPEN,1x SMA male calibration kit - SHORT ,1 x SMA male calibration kit - LOAD, 1 x Touchscreen pen, (Added 1 x 32GB memory card)
- Latest Upgrade NanoVNA-H4 Vector Network Analyzer is the latest version 4.3 with 4.0 inch large LCD touch screen, 10KHz-1.5GHz measurement range, easy to use, compact and portable, perfect for field work. The Antenna Analyzer Measuring is ideal for evaluating antenna resonance and SWR, and can be easily operated by electronic engineers, amateur radio operators or radio DIY enthusiasts after learning from the video.
- Built-in MICRO-SD port and customisable time The latest design of this antenna analyzer with MicroSD card port supports up to 32GB memory card (included in set), so you can save your field test data or screen to MicroSD card at any time, and the new feature of customisable date and time makes it convenient for you to further record and save data.
- Improved frequency algorithm Vector Network Analyzer uses the direct output of the Si5351 to provide better than 70dB of dynamics in the 50K-300MHz frequency range, better than 60dB of dynamics in the extended 300M-900MHz band, and better than 40dB of dynamics in the 900M-1.5GHz band. si5351 The old harmonics of the si5351 are extended to support measurements up to 1.5GHz, making it ideal for troubleshooting a wide range of antennas.
- PC connection & TX/RX function The NanoVNA-H4 Network Analyzer comes with PC connectivity and a built-in 1950mAh battery. The NanoVNASave PC software can be used to connect to NanoVNA, extract data for display on the PC and save to a Touchstone file.The TX/RX method can measure the complete S11 and S21 parameters. The TX/RX method can measure the complete S11/S21 parameters (need to manually replace the transceiver port wiring).
- See more on Amazon...
Brand: TOSTOG | Manufacturer: TOSTOG
See On Amazon #8
Bingfu Dual Band VHF UHF 136-174MHz 400-470MHz Ham Radio Antenna Handheld Two Way Radio SMA Male Soft Antenna 2-Pack for Icom Yaesu Vertex Ham Radio Walkie Talkie Standard Horizon Marine VHF Radio
Asin: B08CTH1K9N | Model: BFN00500 | PartNumber: BFN00500 | Ean: 0790404672650 | UPC: 790404672650
Compatible With Ham Radio: Yaesu Vx-160, Vx-2R, Vx-3R, Vx-7R, Vx-6R, Vx-8R, Ft-60R, Ft-817, Vx130, Vx131, Vx160, Vx-168, Vx180, Vx210, Vx210a, Vx-231, Vx-350, Vx-351Vx400, Vx410, Vx420, Vx-130, Vx-131, Vx-132, Vx-160, Vx-180, Vx-210, Vx-210A, Vx-230, Vx-354,, Vx-414, Vx-420, Vx-424, Vx-600, Vx-800, Vx-820, Vx-821, Vx-824, Vx-829, Vx-900, Vx-920, Vx-921, Vx-924, Vx-929, Vx-970, Vx-971, Vx-974, Vx-979;.
Compatible With Marine Vhf Two Way Radio: Standard Horizon Hx210 Hx870 Hx890 Hx300 Hx380 Hx40 Hx280 Hx290 Hx370;.
Compatible With Ham Radio: Uv-100, Uv-100 Mark Ii, Uv-200, Uv-200 Mark Ii, Uv-3R, Uv-3R Mark Ii, Bf-U3; Tyt Th-2R, Th-446, Th-F5, Th-F7, Th-F8, Thuv3r, Thuv8r, Th-Uvf1, Thuvf8d, Th-Uvf9, Tyt-777, Tyt-900; Compatible With Ham Radio: Linton Lt-5800, Lt-6100, Lt-6600; Puxing Px-2R, Px-325, Px-358, Px-A6; Myt Myt-Q1, Myt-Q7; Wouxun Kg-Uv6d;.
Fits Most Vhf Uhf Amateur Handheld Radio From Yaesu, Alinco, Icom, Tyt, Kenwood Ect Having An Sma Antenna Connector Interface. ( Pin In Antenna).
Features
- Frequency Range: VHF 136-174MHz, UHF 400-470MHz; Direction: Omni-directional; Antenna Connector: SMA Male Connector; Package List: 2 x Antenna (As the Picture Shown);
- Fits Most VHF UHF Amateur Handheld Radio from Yaesu, Alinco, Icom, TYT, Kenwood ect having an SMA Antenna Connector Interface. ( Pin in Antenna)
- Compatible with Ham Radio: YAESU VX-160, VX-2R, VX-3R, VX-7R, VX-6R, VX-8R, FT-60R, FT-817, VX130, VX131, VX160, VX-168, VX180, VX210, VX210A, VX-231, VX-350, VX-351VX400, VX410, VX420, VX-130, VX-131, VX-132, VX-160, VX-180, VX-210, VX-210A, VX-230, VX-354,, VX-414, VX-420, VX-424, VX-600, VX-800, VX-820, VX-821, VX-824, VX-829, VX-900, VX-920, VX-921, VX-924, VX-929, VX-970, VX-971, VX-974, VX-979;
- Compatible with Ham Radio: UV-100, UV-100 MARK II, UV-200, UV-200 MARK II, UV-3R, UV-3R MARK II, BF-U3; TYT TH-2R, TH-446, TH-F5, TH-F7, TH-F8, THUV3R, THUV8R, TH-UVF1, THUVF8D, TH-UVF9, TYT-777, TYT-900; Compatible with Ham Radio: LINTON LT-5800, LT-6100, LT-6600; PUXING PX-2R, PX-325, PX-358, PX-A6; MYT MYT-Q1, MYT-Q7; WOUXUN KG-UV6D;
- Compatible with Marine VHF Two Way Radio: Standard Horizon HX210 HX870 HX890 HX300 HX380 HX40 HX280 HX290 HX370;
- See more on Amazon...
Brand: BINGFU | Manufacturer: Bingfu
Dimensions: 0.51 x 4.72 x 6.69 inches
See On Amazon #9
TECHTOO 9dBi WiFi Antenna with SMA Male (SMA-Plug) Connector Compatible W/Anran Haloview IP Camera & Other Wireless Security Camera Antenna - 2.4Ghz Wireless Networking Device (SMA-Plug 1Pack)
Asin: B00RK7KD7G | Model: STKG-PS3H-DDC1 | PartNumber: STKG-PS3H-DDC1 | Ean: 0702472854913 | UPC: 702472854913
Simply Replace Current Antenna To Increase Signal Strength, Extend Wireless Range To Dead Spot.
Gold Plated Sma-Plug Male Connector( Screw-On Swivel ).
1 X 9Dbi Sma Male (Pole Inside Connector) Antenna For 2.4Ghz For 802.11 B/G/N.
Increases The Range Of Your Wireless Device Such As Router, Access Point, Mini Pcie Network Card, Wireless Wan Range Extender.
Features
- TECHTOO 9dBi Omni WiFi Antenna with SMA MALE (Screw inside with PIN)Connector for Wireless Network Router/USB Adapter/PCI PCIe Cards/IP Camera/Wireless Range Extender
- Increases the Range of Your Wireless Device Such as Router, Access Point, Mini PCIe Network Card, Wireless Wan Range Extender
- Simply Replace Current Antenna to Increase Signal Strength, Extend Wireless Range to Dead Spot
- 1 x 9dBi SMA MALE (Pole Inside Connector) Antenna for 2.4GHz For 802.11 B/G/N
- Gold Plated SMA-Plug MALE Connector( Screw-On Swivel )
- See more on Amazon...
Brand: TECHTOO | Manufacturer: TECHTOO
Dimensions: 2.90 x 4.00 x 1.00 inches
See On Amazon #10
AURSINC NanoVNA Vector Network Analyzer, 10KHz-1.5GHz HF VHF UHF Antenna Analyzer Ham Radio with 2.8'' Touchscreen HW V3.5, Measuring S Parameters, Voltage Standing Wave Ratio, Phase Delay Smith Chart
Asin: B07T6LXNTV | Model: NanoVNA 2.8'' | PartNumber: NanoVNA 2.8'' | Ean: 0753318592193 | UPC: 753318592193
[Measurement Frequency] Measurement Frequency Of Nanovna Is 10Khz - 1.5Ghz (50Khz -900Mhz, Enable Extended Firmware). Measurement Range: 70Db (50Khz-300Mhz), 60Db (300M-900Mhz), 40Db (900Mhz-1.5Ghz) Enable Extended Firmware. The Improved Frequency Algorithm Can Use The Odd Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz.
[Package List] 1X Nanovna Host (With 650Ma-H Battery, Without Case, Came In A Plastic Case), 1X Usb Type-C Data Cable, 2X 30Cm Sma Male To Male Rg174 Rf Cable, 1X Sma Simple Calibration Kit, 1X Sma Female To Female Connector.
[Accurate Measurement] The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters. If You Need To Obtain S12 And S22, You Need To Manually Replace The Transceiver Port Wiring. The Ch0 Output Level Is Increased To 0Dbm When Using The Fundamental Wave, Resulting In More Accurate Reflection Measurement.
[More Functionality] Measuring Amplifier Gain, Bandwidth, Phase Frequency Characteristics, Transmission Line Loss, Characteristic Impedance, Coupler Coupling, Isolation, Filter, Diplexer Passband And So On. You Can Being Able To See A Graph Of The Swr Of A Given Antenna Over A Sweep That You Get To Set Start And Stop. Excellent Performance For Radio Amateurs.
[Pc Control] Designed A Practical And Simple Control Application On Pc, You Can Download Touchstone(Snp) Files For Radio Design And Simulation Software. There's Nanovnasharp Software Available For Pc And Linux (Github.Com/Mihtjel/Nanovna-Saver/Releases), Supports Control And Real-Time Display. You Can Connect The Nanovna To Your Pc For A Large Screen Display With A Usb-C Cable.
[Licensing And Firmware] Developed By Hugen, More Info Pls View "Nanovna-Users@Groups.Io". The Firmware Version Of Nano Vna Is Hw V3.5. It Is Upgradeable As New Firmware Is Developed (Github.Com/Ttrftech/Nanovna). The Default Firmware Of Aursinc Nanovna Main Function Is Used For Antenna Performance Measurement.
Features
- [Designed for DIY] This nanovna is a DIY product (no enclosure) that provides perfect vector network measurement capabilities in a credit card-sized design, featuring a 2.8-inch TFT touch screen (320 x240) and a 650mAh battery for up to 2 hours. Added battery management circuit to reduce power noise, USB power interference, charging current, and protects the battery
- [Licensing and Firmware] Developed by Hugen, more info pls view nanovna-users@groups.io. The firmware version of nano vna is HW V3.5. It is upgradeable as new firmware is developed (github.com/ttrftech/NanoVNA). The default firmware of AURSINC nanovna main function is used for antenna performance measurement
- [Measurement Frequency] Measurement frequency of nanovna is 10KHz - 1.5GHz (50KHz -900MHz, enable extended firmware). Measurement range: 70dB (50kHz-300MHz), 60dB (300M-900MHz), 40dB (900MHz-1.5GHz) enable extended firmware. The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz
- [PC Control] Designed a practical and simple control application on PC, you can download touchstone(SNP) files for radio design and simulation software. There's NANOVNASHARP software available for PC and Linux (github.com/mihtjel/nanovna-saver/releases), supports control and real-time display. You can connect the nanovna to your PC for a large screen display with a USB-C cable
- [Accurate Measurement] The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring. The CH0 output level is increased to 0dBm when using the fundamental wave, resulting in more accurate reflection measurement
- [More Functionality] Measuring amplifier gain, bandwidth, phase frequency characteristics, transmission line loss, characteristic impedance, coupler coupling, isolation, filter, diplexer passband and so on. You can being able to see a graph of the SWR of a given antenna over a sweep that you get to set start and stop. Excellent performance for radio amateurs
- [Package list] 1x NanoVNA host (with 650mA-h battery, without case, came in a plastic case), 1x USB Type-C data cable, 2x 30cm SMA male to male RG174 RF cable, 1x SMA simple calibration kit, 1x SMA female to female connector
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
Dimensions: 0.47 x 2.13 x 3.35 inches | Weight: 0.22 pounds
See On Amazon #11
AURSINC SMA Calibration Kit for NanoVNA H H4 F V2 V3 SAA Mini1300 PS100 Vector Network Analyzer Antenna Analyzer | Calibrate RF Coaxial Test Connector Short/Load/Open/Thru Type 5 pcs/Set
Asin: B082F25WXC | Model: 19120601 | PartNumber: 19120601
Inpedance: 50 Ohm.
Material: Copper, Shape: Circle..
Vswr: Less Than 1.1.
Connector: Sma Male For Short And Load..
Features
- Frequency: DC to 3GHz
- Connector: SMA male for Short and Load.
- Inpedance: 50 Ohm
- VSWR: less than 1.1
- Material: Copper, Shape: Circle.
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
See On Amazon #12
Testboard Kit NanoVNA Antenna Analyzer, AURSINC Test Demo Set Tool Compatible with DIP Quickly Assemble a Simple RF Circuit and Evaluate Performance on NanoVNA H H4
Asin: B08642VPJX | Ean: 0753318593008 | UPC: 753318593008
The Testboard Kit Is Utilized For User-Friendly Measurement Of Dip And Smt Devices With Nanovna Or Other Vector Analyzers.
The Smt Circuit Cannot Fully Consider All Test Conditions. Some Tests May Need To Be Cut Over. Please Ensure You Have Sufficient Practical Skills.
Package Include: 1X Testboard Printed Circuit Board (Compatible With Dip Pads Of Vnwa Testboard And Add 0805 And 1206 Stm Pads), 6X Sma End Connectors (Same Type As In Nanovna), 4X Copper 8Mm Spacers, 4X M2.5 4Mm Screws, 2X 40 Pin Female Sil Socket.
Product Come Unassembled, You Need To Assemble According To Your Purpose. Please Prepare Your Own Welding Tools And Build A Test Circuit According To Your Test Needs. We Are Not Responsible For Circuit Guidance.
This Test Board Contains A Plug-In Test Circuit Suitable For Vna Testboard, And A Set Of 0805 And 1206 Patch Test Circuits Are Added.
Features
- The Testboard kit allows NanoVNA users to assemble a useful Component jig to quickly assemble a simple RF circuit and evaluate their performance on the NanoVNA
- This test board contains a plug-in test circuit suitable for VNA Testboard, and a set of 0805 and 1206 patch test circuits are added
- The testboard kit is utilized for user-friendly measurement of DIP and SMT devices with NanoVNA or other vector analyzers
- Product come unassembled, you need to assemble according to your purpose. Please prepare your own welding tools and build a test circuit according to your test needs. We are not responsible for circuit guidance
- The SMT circuit cannot fully consider all test conditions. Some tests may need to be cut over. Please ensure you have sufficient practical skills
- Package include: 1x Testboard Printed Circuit Board (Compatible with DIP pads of VNWA Testboard and add 0805 and 1206 STM pads), 6x SMA End Connectors (same type as in NanoVNA), 4x Copper 8mm spacers, 4x M2.5 4mm screws, 2x 40 pin female SIL Socket
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
See On Amazon #13
Upgraded NanoVNA-H4 Vector Network Analyzer V4.3, Elikliv 10KHz-1.5GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart, 4" Screen
Asin: B07XZF4HGD | Model: US112 | PartNumber: US112 | Ean: 0889252076069 | UPC: 889252076069
💜[Improved Performance & Built Quality] The 4 Inch Nanovna-H4 Is A Great Upgrade To The 2.8"" Screen. Its Performance Is Outstanding, The Display Quality Is Very Crisp.This Nanovna Is Perfect For Evaluating Antenna Resonance And Swr, 4 Inch Screen Is Easy To Read And Touch Screen Is Responsive And Can By Navigated With A Finger. With Good Accuracy And Built In 1950Mah Rechargeable Battery, Can Be Used In Ham Radio Shack..
💜[Complete Vna Set, Out Of The Box] With All The Attachments, This Antenna Analyzer Kit Comes In Quite A Nice Cardboard Box. Inside Content Includes: Nanovna-H4 (With 1950Ma-H Battery) X1, Usb Type-C Data Cable X1, 15Cm Sma Male To Male Rg316 Rf Cable X2, Sma Male Calibration Kit - Open X1, Sma Male Calibration Kit - Short X1, Sma Male Calibration Kit - Load X1. Great For Trouble Shooting Antennas And Improving Performance..
💜[Pc Control]: This Nanovna Can Be Controlled By Pc Using Software Vna Saver. The Software Has A Number Of Features Such As The Ability To Run Many Smaller Frequency Sweeps (The Nanovna Takes 101 Measurements Across A Sweep) And Combine The Results To Get A Higher Resolution Sweep. There Are Also Averaging Functions And Allows You To Do Time Domain Reflectometry Which Can Be Useful For Detecting Damaged Cable Runs. It Also Allows Easier Readoff Of Datapoints Using Markers..
💜[Must Have For Radio Operator Or Enthusiast] This Spectrum Analyzer Will Be A Nice Little Addition To The Workbench, Which Is A Very Handy Analyzer For The Amateur Radio Operator Or Radio Enthusiast. The Smith Chart Is Very Handy To Have As Well As Being Able To See Reflected Db. You Get A Lot Of Information From This Little Unit, Connect It To Your Pc And Is Able To Save A .Cal File For A Certain Frequency Which Saves Your Time..
Features
- [Upgraded Antenna Analyzer V4.3] The Upgraded NanoVNA-H4 Version features a larger resistive touchscreen (4 inch)and widened frequency scan range (10KHz-1.5GHz) to measure RF S11 (reflection), S21 (forward gain), and related parameters. Designed with a SD Card Port, this new nanovna is convenient for your data storage and sharing.
- [Must Have for Radio Operator or Enthusiast] This spectrum analyzer will be a nice little addition to the workbench, which is a very handy analyzer for the amateur radio operator or radio enthusiast. The smith chart is very handy to have as well as being able to see reflected db. You get a lot of information from this little unit, connect it to your PC and is able to save a .cal file for a certain frequency which saves your time.
- [Improved Performance & Built Quality] The 4 inch NanoVNA-H4 is a great upgrade to the 2.8 screen. Its performance is outstanding, the display quality is very crisp.This nanoVNA is perfect for evaluating antenna resonance and SWR, 4 inch screen is easy to read and touch screen is responsive and can by navigated with a finger. With good accuracy and built in 1950mAh rechargeable battery, can be used in ham radio shack.
- [PC Control]: This nanoVNA can be controlled by PC using software VNA Saver. The software has a number of features such as the ability to run many smaller frequency sweeps (the nanoVNA takes 101 measurements across a sweep) and combine the results to get a higher resolution sweep. There are also averaging functions and allows you to do time domain reflectometry which can be useful for detecting damaged cable runs. It also allows easier readoff of datapoints using markers.
- [Complete VNA Set, Out of the Box] With all the attachments, this antenna analyzer kit comes in quite a nice cardboard box. Inside content includes: NanoVNA-H4 (with 1950mA-h battery) x1, USB Type-C data cable x1, 15cm SMA male to male RG316 RF cable x2, SMA male calibration kit - OPEN x1, SMA male calibration kit - SHORT x1, SMA male calibration kit - LOAD x1. Great for trouble shooting antennas and improving performance.
- See more on Amazon...
Brand: Elikliv | Manufacturer: Elikliv
See On Amazon #14
42.5-Inch ABBREE SMA-Male VHF UHF Dual Band 144/430Mhz Foldable Tactical Antenna for Yaesu FT-70DR,FT-2DR,FT-270R TYT Wouxun Ham Two Way Radio
Asin: B07SSP7F7T | Model: 108cm | PartNumber: 108cm | Ean: 0675234309412 | UPC: 675234309412
Brand: ABBREE | Manufacturer: ABBREE
See On Amazon #15
Seesii NanoVNA-F V3 Vector Network Analyzer, [Upgraded] 1MHz-6GHz 4.3 Inch HF VHF UHF VNA Antenna Analyzer, Measuring S-Parameter Voltage SWR,Phase,Delay,Smith Chart,RTC Real-time,801 Scan Points
Asin: B0CCTC88RX | Model: Seesii NanoVNA-F V3 | PartNumber: Seesii NanoVNA-F V3
👍【Trustworthy Quality】:This Nano Vna Analyzer Measuring Tool Is Made Of Metal Material, Which Is Durable And Can Effectively Shield Electromagnetic Interference. With Sma Connector Design Which Can Be Used To Connect Duts Directly.In Addition,It Is Support Pc Software Control And Compatible With Nanovna-Saver For Convenient Measurement Data Transfer.Built-In 4500M-Ah Rechargeable Battery,With Type-C Charging Cable And Led Charging Indicator,It Can Be Fully Charged Within 3 Hours,No Need To Charge Frequently..
🎁【What You Will Get:】: Seesii Upgraded Value Nanovna-F V3 Kit Includes 1 X Nanovna-F V3,1 X Gold-Plated Sma Calibration Kit (Load, Open And Short),1 X Sma Female To Sma Female Connector,1 X Sma Male To Sma Male Connector,1 X Sma Jkw Connector,2 X 20Cm/7.9" Rg405 Cables,1 X Usb Type-C Data Cable. Seesii Provides 7*24 Hours Technical Service And 90-Day Money-Back Service, 3 Years Warranty Lifetime Customer Support. You Can Use It With Confidence..
🎖️【Multiple Measurement Functions】: Seesii Nanovna-F V3 Antenna Analyzer Is Suitable For Antenna Testing Of Mf/Hf/Vhf/Uhf/Shf Bands. Supports A Variety Of Display Formats: Log Mag, Linear Mag, Phase, Smith R+Jx, Smith R+L/C, Vswr, Polar, Group Delay, Resistance, Reactance, Etc. It Can Also Be Used To Measure Filters, Amplifiers, Attenuators, Cables, Power Dividers, Couplers, Duplexers And Other Rf Components. For The Amateur Radio Operator Or Radio Enthusiast, This Latest Vna Antenna Analyzer Will Be A Very Handy Analyzer To Have..
✅【Widely Frequency Range】:Compared To The Nanovna-F V2 (50Khz-3Ghz), The Upgraded Nanovna-F V3 Has 1Mhz-6Ghz Ultra-Wide Measuring Frequency Range, The S21 Dynamic Range Of Nanovna-F V3 Is 65 Db, While The S11 Dynamic Range Is 50 Db. The Scan Points Is Up To 101-801 And The Calibration Result Storage Is 12, Covering Up To The Full Low Or High Frequency Range. Faster And More Accurate Measurement Performance, You Can Easily Cope With Measurement Testes In Various Fields..
Features
- Improved Performance :This NanoVNA-F V3 vna analyzer is a new production machine from 2023, with 4.3 inch 800 x 480 large touchscreen display, 1MHz to 6GHz widely measuring range, the scan speed of NanoVNA-F V3 is up to 200 points/s and the maximum scanning points is up to 801.In addition, the nanovna analyzer supports TDR function which is useful for cable lengths measurement.
- Widely Frequency Range :Compared to the Nanovna-F V2 (50kHz-3GHz), the upgraded Nanovna-F V3 has 1MHz-6GHz ultra-wide measuring frequency range, The S21 dynamic range of NanoVNA-F V3 is 65 dB, while the S11 dynamic range is 50 dB. The scan points is up to 101-801 and the calibration result storage is 12, covering up to the full low or high frequency range. Faster and more accurate measurement performance, you can easily cope with measurement testes in various fields.
- Trustworthy Quality :This nano vna analyzer measuring tool is made of metal material, which is durable and can effectively shield electromagnetic interference. With SMA connector design which can be used to connect DUTs directly.In addition,it is support PC Software control and compatible with NanoVNA-Saver for convenient measurement data transfer.Built-in 4500m-ah rechargeable battery,with type-C charging cable and LED charging indicator,it can be fully charged within 3 hours,no need to charge frequently.
- Multiple Measurement Functions : SeeSii NanoVNA-F V3 antenna analyzer is suitable for antenna testing of MF/HF/VHF/UHF/SHF bands. Supports a variety of display formats: Log Mag, Linear Mag, Phase, Smith R+jX, Smith R+L/C, VSWR, Polar, Group delay, Resistance, Reactance, etc. It can also be used to measure filters, amplifiers, attenuators, cables, power dividers, couplers, duplexers and other RF components. For the amateur radio operator or radio enthusiast, this latest vna antenna analyzer will be a very handy analyzer to have.
- What You Will Get: : Seesii upgraded value nanovna-f v3 kit includes 1 x NanoVNA-F V3,1 x Gold-Plated SMA Calibration Kit (LOAD, OPEN and SHORT),1 x SMA Female to SMA Female Connector,1 x SMA Male to SMA Male Connector,1 x SMA JKW Connector,2 x 20cm/7.9 RG405 Cables,1 x USB Type-C Data Cable. Seesii provides 7*24 hours technical service and 90-day money-back service, 3 years warranty lifetime customer support. You can use it with confidence.
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
See On Amazon #16
SMA Calibration Kits for Antenna Analyzer NanoVNA F H V2 H4 SAA Mini1300 PS100 Vector Network Analyzer Calibrate RF Coaxial Test Connector Short/Load/Open/Thru/Jumper/F2F/M2M Type 6 pcs/Set
Asin: B09Z6S85QL | Model: CAL08 | PartNumber: CAL08
Material: Copper，Shape: Circle..
We Add One Sma Male To Male Jumper For Thru Calibration Step..
Connector: Sma Male For Short And Load..
Input Impedance: 50 Ohm, Vswr: Less Than 1.1.
Features
- Frequency: Up to 6GHz
- Input impedance: 50 Ohm, VSWR: less than 1.1
- Material: Copper Shape: Circle.
- Connector: SMA Male For Short and Load.
- We add one SMA male to male jumper for Thru Calibration step.
- See more on Amazon...
Brand: Tuidudi | Manufacturer: RockCow
See On Amazon #17
AURSINC NanoVNA SAA-2N V2.2 Vector Network Analyzer 50KHz-3GHz HF VHF UHF Antenna Analyzer Ham Radio Measuring S Parameters, Duplexer, Voltage Standing Wave Ratio, Phase, Delay
Asin: B08G4GXTKK | Model: 20210407 | PartNumber: 20210407 | Ean: 0753318593367 | UPC: 753318593367
✔️[Pc Connection] Nanovna Saa-2N Can Be Controlled By Pc Via Vna-Qt Software,Supported For Linux, Windows (7+), Mac Os Planned. It Also Support Nanovna-Saver For Extracting The Data For Display On A Computer, And For Saving To Touchstore Files.
✔️[Compliance] Saa-2N 3Ghz Vector Network Analyzer, Designed In Collaboration With Owocomm. Under The Lgpl License Agreement, It Is Completely Manufactured According To The V2_2 Files Issued By Owocomm At Development Department, In Line With The Original Technical Specifications.
✔️[Note Recalibrate] The Saa-2N/Nanovna_V2.2 Uses A Similar User Interface To The Nanovna, But With A Different Technical Architecture, The Saa-2N/Nanovna_V2.2 Does Not Load The Initial Calibration Data At Startup, And Does Not Automatically Interpolate The Calibration Data After The User Changes The Frequency, And Must Recalibrate Or Call Back The Calibration Data After Each Startup And Frequency Change. Please Read The User Manual Carefully Before Use To Avoid Damaging The Device.
Features
- [Frequency Range] Transmission Mearsure S21: 70dB(50KHz-1.5GHz), 60dB(1.5GHz-3GHz). Reflection Measure S11: -50dB(50KHz-1.5GHz), -40dB(1.5GHz-3GHz); Antenna Analyzer: 1.005(50KHz - 1.5GHz), 1.02(1.5GHz-3GHz)
- [Note Recalibrate] The SAA-2N/NanoVNA_V2.2 uses a similar user interface to the NanoVNA, but with a different technical architecture, the SAA-2N/NanoVNA_V2.2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or call back the calibration data after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device
- [PC Connection] nanovna saa-2n can be controlled by PC via VNA-QT software,supported for Linux, Windows (7+), Mac OS planned. It also support Nanovna-Saver for extracting the data for display on a computer, and for saving to Touchstore files
- [Compliance] SAA-2N 3GHz vector network analyzer, designed in collaboration with OwOComm. Under the LGPL license agreement, it is completely manufactured according to the v2_2 files issued by OwOComm at Development Department, in line with the original technical specifications
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
Dimensions: 2.52 x 8.54 x 5.55 inches
See On Amazon #18
FPV Small WiFi Antenna 2.4GHz Wireless Module Omni Directional Thumb Antenna mmdvm Network Router Antenna SMA Male TX RX Mini RHCP Racing Drone Antenna for Multicopter WiFi USB Adapter Pack of 2
Asin: B09XMF4JHT | Model: JYA-022-2X | PartNumber: JYA-022-2X
Conector Type : Sma Male (Pin Inside); Antenna Gain :2 Dbi;Impedance Matching To 50 Ohm Gear;3Cm Long.
Package Content : 2 X 2.4Ghz Short Wifi Antenna.
Polarization Omnidirectional,Maxlmum Input Power:50W;Application:Wireless Network Router, Pci Pcie Network Card,Notebook Pc Computer External Usb Adapter, Wlan Ap & Hotspot Wireless Range Extender, Fpv Camera, Etc.
Compatibility With Wireless Standards & Applications;Vertically Polarized And Suitable For Many Of Today’S Machine To Machine And Communication Applications Such As Telemetry, Remote Monitoring And Mesh Networking Applications..
Features
- This Mini WiFi Bluetooth antenna could be used on drone transmitter&receiver and PC motherboard;The 2.4GHz small WiFi antenna will assist your network devices get a stronger signal reception and a stable connection, no dropouts when use them
- Compatibility with wireless standards & applications;Vertically polarized and suitable for many of today s machine to machine and communication applications such as telemetry, remote monitoring and mesh networking applications.
- Conector Type : SMA Male (pin inside); Antenna gain :2 dBi;impedance matching to 50 Ohm gear;3CM long
- Polarization Omnidirectional,Maxlmum input Power:50W;Application:wireless network router, PCI PCIe network card,notebook PC computer external USB adapter, WLAN AP & Hotspot wireless range extender, FPV camera, etc
- Package Content : 2 x 2.4GHz Short WiFi Antenna
- See more on Amazon...
Brand: onelinkmore | Manufacturer: onelinkmore
See On Amazon #19
AURSINC NanoVNA-F V2 Vector Network Analyzer, 50KHz-3GHz Antenna Analyzer Ham Radio HF VHF UHF 4.3inch screen 5000mAh Battery Measuring S-Parameters Voltage Standing Wave Ratio Phase Delay Smith Chart
Asin: B0B42C2H5V | Model: NanoVNA-F V2 | PartNumber: NanoVNA-F V2
[Design Of Aluminum Cases] Rugged And Durable Aluminum Alloy Cases, Shielding Electromagnetic Interference To Ensure Precise Measurements. The Sma Radio Frequency Interface Enables Seamless Connectivity With Various Measurement Devices.
[Packing List] 1X Nanovna F V2 Host, 1X Sma Open Calibration Kit, 1X Sma Short-Circuit Calibration Kit, 1X Sma 50Ω Load Calibration Kit, 1X Sma-Kk Double-Head Female Hole Adapter, 1X Sma-Jj Double-Head Male Pin Adapter, 1X Sma-Jkw Elbow Outer Screw Inner Hole To Inner Screw Inner Needles Adapter, 2X 20Cm Sma-Jj Rg405 Rf Cable, 1X Usb Type-C Data Cable, 1X Stylus.
[Pc & Android Phone Control] Nanovna F V2 Hardware Is Supported By A Program "Nanovna Saver", Using Nanovna-Saver Connect To The Nanovna, Extracts Data For Display And Save Data In Touchstone Files. The Scada Software Enables Us To Export Touchstone (Snp) Files For Various Radio Design And Simulation Software. Supports Android Mobile Phone Only (Please Download The Product Document For Details).
[Nanovna Saver Notes] It Could Run On Windows 7 Embedded Control System With Your Own Software. For Win8 And Earlier Versions Of The Windows System, You Need To Install The Driver: St.Com/En/Development-Tools/Stsw-Stm32102.Html. For Nanovna-Saver You Need To Try, We Do Not Support Any Win10 Earlier Versions System. Software Upgrade The Website: Sysjoint.Com/En/Content/?144.Html. Any Questions Please Contact Us..
[4.3'' Screen & 5000Mah Battery] The Nano Vna Has A 4.3-Inch Ips Tft Lcd Screen With A Resolution Of 800*480 And A Resistive Touch Screen, Providing A Large Viewing Angle. It Is Equipped With An 5000Mah Lithium Battery For Longer Standby Time, Up To 7 Hours Of Usage. With The Use Of A 2A Large-Current Charging Ic, The Charging Time Is Reduced. As An Add-On, It Built-In 5V Output For Charging Android Phones Or Tablets.
[Frequency Range] The Measurement Range Of Nanovna-F V2 Expanded To 50Khz-3Ghz. The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters, S21 Dynamic Ranges: 70Db (1.5Ghz), 60Db (3Ghz); S11 Dynamic Ranges: 50Db (1.5Ghz), 40Db (3Ghz).
Features
- [Upgraded Version] The NanoVNA-F V2 upgraded to the latest firmware V0.4.0, the operation page is compatible with Nanovna-F. More features that it enables measurements of S-parameter, voltage standing wave ratio (SWR), phase map, group delay, Smith chart, DELAY, POLAR, LINEAR and more
- [Frequency Range] The measurement range of nanovna-f v2 expanded to 50KHz-3GHz. The TX/RX method can measure the complete S11 and S21 parameters, S21 dynamic ranges: 70dB (1.5GHz), 60dB (3GHz); S11 dynamic ranges: 50dB (1.5GHz), 40dB (3GHz)
- [Design of Aluminum Cases] Rugged and durable aluminum alloy cases, shielding electromagnetic interference to ensure precise measurements. The SMA radio frequency interface enables seamless connectivity with various measurement devices
- [4.3'' Screen & 5000mAh Battery] The nano vna has a 4.3-inch IPS TFT LCD screen with a resolution of 800*480 and a resistive touch screen, providing a large viewing angle. It is equipped with an 5000mAh lithium battery for longer standby time, up to 7 hours of usage. With the use of a 2A large-current charging IC, the charging time is reduced. As an add-on, it built-in 5V output for charging Android phones or tablets
- [PC & Android Phone Control] NanoVNA F V2 hardware is supported by a program NanoVNA Saver, using Nanovna-Saver connect to the nanovna, extracts data for display and save data in Touchstone files. The SCADA software enables us to export Touchstone (snp) files for various radio design and simulation software. Supports Android Mobile Phone only (Please download the product document for details)
- [NanoVNA Saver Notes] it could run on windows 7 embedded control system with your own software. For Win8 and earlier versions of the Windows system, you need to install the driver: st.com/en/development-tools/stsw-stm32102.html. For NanoVNA-Saver you need to try, we do not support any win10 earlier versions system. Software Upgrade the website: sysjoint.com/en/content/?144.html. Any questions please contact us.
- [Packing List] 1x Nanovna f v2 Host, 1x SMA Open Calibration Kit, 1x SMA Short-circuit Calibration Kit, 1x SMA 50 Load Calibration Kit, 1x SMA-KK Double-Head Female Hole Adapter, 1x SMA-JJ Double-Head Male Pin Adapter, 1x SMA-JKW Elbow Outer Screw Inner Hole To Inner Screw Inner Needles Adapter, 2x 20cm SMA-JJ RG405 RF Cable, 1x USB Type-C Data Cable, 1x Stylus
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
Dimensions: 0.80 x 5.10 x 2.85 inches | Weight: 0.94 pounds
See On Amazon #20
Dual Band SMA Male 144/430mhz Flexible Whip Handheld Antenna Soft for Ham Two Way Radio for YAESU VERTAX VX-3R VX-5R PUXING WouXun Walkie Talkie 2pcs
Asin: B072K4PSX7 | Model: NA-771N Male | PartNumber: NA-771N Male
Compatible With Some Baofeng, Some Tyt, And Some Yaesu Handheld Radios.
Each Antenna Will Be Tested More Than Threes Times, All Our Product Made Of High Quality Material And Provide Excellent Performance! We Also Provide 30 Days No Reason To Return.
Package Include: 2* Twayrdio Na-771N Sma Male Antenna.
Frequency 144/430Mhz;Gain:2.15Dbi Maximum Power Input-Watts:20W; Length: 14Inch. It Can Help Your Handheld Radio Extend The Talk Distance.
Features
- TWAYRDIO NA-771N Dual Band Whip Antenna 2M/70cm. very flexible with high gain, Allow you to get longer communication distance on your handheld radio
- Frequency 144/430MHz;Gain:2.15dBi Maximum Power Input-watts:20W; Length: 14inch. it can help your handheld Radio extend the talk distance
- Compatible with some BaoFeng, some TYT, and some Yaesu Handheld Radios
- Package include: 2* TWAYRDIO NA-771N SMA Male Antenna
- Each antenna will be tested more than threes times, all our product made of high quality material and provide excellent performance! we also provide 30 days no reason to return
- See more on Amazon...
Brand: TWAYRDIO | Manufacturer: NA-771N Male
Dimensions: 1.57 x 18.90 x 0.79 inches
See On Amazon
Looking For Something Else?
Search