15Pcs 5V 1A TP4056 Charging Module Micro USB 18650 Lithium Battery Charger Board with Protection
Asin: B08MT6567Z | Model: 19061 | PartNumber: 19061 | Ean: 0701715451995 | UPC: 701715451995
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Application:It Can Charge For Single-Cell Lith Ium Battery Or Multi-Section Parallelled Lithium Batteries, Can Be Powered By Usb Ports; The Module With Usb Port, Can Be Directly Input To Do With Rechargeable Lithium Battery As A Phone Charger, And Still Retains Voltage Input Wiring Pads, Which Is Convenient For Diy..
Package Includes:15 *Tp4056 Micro Usb Charging Module.
Note:Please Check All Connections Before Charging, It Will Be Damaged If The Load Out Terminal On The Positive And Negative With Wrong Polarity. There Is Not Included Installation Instruction.If You Are The First Time To Do This Job, We Suggest You Can Watch Related Video On Youtube Before Installation..
Power Indicator: Red Is Charging, Green Is Fully Charged..
Features
- Input Voltage: 5V; Max output current: 1A; Charging cut-off voltage: 4.2V 1%; Input interface: Micro USB
- Power Indicator: Red is charging, Green is fully charged.
- Application:It can charge for single-cell lith ium battery or multi-section parallelled lithium batteries, can be powered by USB ports; The module with usb port, can be directly input to do with rechargeable lithium battery as a phone charger, and still retains voltage input wiring pads, which is convenient for DIY.
- Note:Please check all connections before charging, it will be damaged if the load OUT terminal on the positive and negative with wrong polarity. There is not included Installation instruction.If you are the first time to do this job, we suggest you can watch related video on Youtube before installation.
- Package includes:15 *TP4056 Micro USB Charging Module
- See more on Amazon...
Brand: Atnsinc | Manufacturer: Atnsinc
Weight: 0.04 pounds
See On Amazon Similar To 15Pcs 5V 1A TP4056 Charging
#1
15pcs 5V 1A TP4056 Charging Module Type-C USB 18650 Lithium Battery Charger Board with Protection (Type-C USB)
Asin: B08X6G26Q8 | Ean: 0701715460140 | UPC: 701715460140
Application:It Can Charge For Single-Cell Lith Ium Battery Or Multi-Section Parallelled Lith Ium Batteries, Can Be Powered By Usb Ports; The Module With Usb Port, Can Be Directly Input To Do With Rechargeable Lith Ium Battery As A Phone Charger, And Still Retains Voltage Input Wiring Pads, Which Is Convenient For Diy..
Package Includes:15*Tp4056 Type-C Usb Charging Module.
Note:Please Check All Connections Before Charging, It Will Be Damaged If The Load Out Terminal On The Positive And Negative With Wrong Polarity. There Is Not Included Installation Instruction.If You Are The First Time To Do This Job, We Suggest You Can Watch Related Video On Youtube Before Installation..
Power Indicator: Red Is Charging, Green Is Fully Charged..
Features
- Input Voltage: 5V; Max output current: 1A; Charging cut-off voltage: 4.2V 1%; Input interface: Type-C USB
- Power Indicator: Red is charging, Green is fully charged.
- Application:It can charge for single-cell lith ium battery or multi-section parallelled lith ium batteries, can be powered by USB ports; The module with usb port, can be directly input to do with rechargeable lith ium battery as a phone charger, and still retains voltage input wiring pads, which is convenient for DIY.
- Note:Please check all connections before charging, it will be damaged if the load OUT terminal on the positive and negative with wrong polarity. There is not included Installation instruction.If you are the first time to do this job, we suggest you can watch related video on Youtube before installation.
- Package includes:15*TP4056 Type-C USB Charging Module
- See more on Amazon...
Brand: Atnsinc | Manufacturer: Atnsinc
Weight: 0.04 pounds
See On Amazon #2
DWEII 10PCS Type-C USB 5V 2A Boost Converter Step-Up Power Module Lithium Battery Charging Protection Board LED Display USB for DIY Charger (no Welding Version)
Asin: B09YD5C9QC | Ean: 0701715515956 | UPC: 701715515956
❃❃It Supports The External Key, Which Is Connected To The K Point And The Output Negative Pole. Short Press To Turn On The Power Display And Turn On The 5V Output. Two Consecutive Short Presses Will Turn Off The Power Display And Turn Off The 5V Output..
❃❃1; When The Charging Current Drops To 100Ma After Reaching The Final Floating Charging Voltage, The Charging Cycle Will Be Automatically Terminated; 2; When The Battery Voltage Drops Below 4.1V, The Charging Cycle Starts Again. 3; When The Battery Voltage Is Lower Than 2.8V, The Battery Will Be Pre Charged With A Current Of 180Ma..
❃❃When The Load Current Is Less Than 50Ma Continuously, The Output Will Be Turned Off..
❃❃Usb Is No Welding Version.
Features
- 10PCS ( no welding version) Type-C USB 5V 2A Boost Converter Step-Up Power Module Lithium Battery Charging Protection Board LED Display USB For DIY Charger
- USB is no welding version
- It supports the external key, which is connected to the K point and the output negative pole. Short press to turn on the power display and turn on the 5V output. Two consecutive short presses will turn off the power display and turn off the 5V output.
- When the load current is less than 50mA continuously, the output will be turned off.
- 1; When the charging current drops to 100mA after reaching the final floating charging voltage, the charging cycle will be automatically terminated; 2; When the battery voltage drops below 4.1V, the charging cycle starts again. 3; When the battery voltage is lower than 2.8V, the battery will be pre charged with a current of 180mA.
- See more on Amazon...
Brand: DWEII | Manufacturer: DWEII
See On Amazon #3
AITRIP 10pcs TP4056 Type-c USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Dual Protection Functions (10pcs TP4056 Type-c USB)
Asin: B08DNK398S | Model: EC16958 | PartNumber: EC16958 | Ean: 0701715437173 | UPC: 701715437173
Battery Overcharge Lifting Voltage: 4.00 V.
Charging Cut-Off Voltage: 4.2V ± 1%.
Battery: Over-Current Protection Current 3 A.
Maximum Charging Current Output: 1000Ma.
Features
- Input interface: Type-c USB
- Maximum charging current output: 1000mA
- Battery overcharge lifting voltage: 4.00 V
- Battery: over-current protection current 3 A
- Charging cut-off voltage: 4.2V 1%
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
Weight: 0.04 pounds
See On Amazon #4
MakerFocus 15pcs TP4056 Charging Discharging Module Type C Interface with Battery Protection 18650 BMS 5V 1A 18650 Lithium Battery Charging Board
Asin: B0CWNXKR4X | Model: P9S8R16X4908HWS025JI | PartNumber: P9S8R16X4908HWS025JI
Application: Tp4056 Module Can Charge For Single-Cell Lithium Battery Or Multi-Section Parallelled Lithium Batteries, Can Be Powered By Usb Ports; The Module With Usb Port, Can Be Directly Input To Do With Rechargeable Lithium Battery As A Phone Charger.
Attention: The Charge Should Disconnect The Load Out Terminal On The Positive And Negative Can Not Be Wrong, Please According To Specifications, Otherwise It Will Damage Directly.
Reminder: Please Check All The Connections Before Charging, It Will Be Damaged If The Load Out On The Positive And Negative With Wrong Polarity. If You Do This The First Time, Please Watch The Video On Youtube Before Installation.
Note: When First Accessing The Battery, There May Be No Voltage Output Between Out+/Out-, At This Time Access To 5V Charging Can Activate The Protection Circuit, The Battery Is Disconnected From B+/B- And Then Connected Again Also Need To Be Charged To Activate The Protection Circuit. When Using A Mobile Phone Charger As Input, The Charger Should Be Able To Output 1A Or Above, Otherwise It May Not Charge Properly..
Usage: The +/- Pads Are The Power Inputs, Access To 5V. B+ Connects To The Positive Pole, B- Connects To The Negative Pole, Out+ And Out- Connects To The Loads, Such As Connecting To The Positive And Negative Pole Of The Mobile Booster Board Or Other Loads.
Features
- Upgrade Version: The input has a Type C female connector, which can be directly input as a mobile phone charger to recharge the lithium battery; The input voltage wiring pad is also reserved, which can be very convenient for DIY
- Usage: The +/- pads are the power inputs, access to 5V. B+ connects to the positive pole, B- connects to the negative pole, OUT+ and OUT- connects to the loads, such as connecting to the positive and negative pole of the mobile booster board or other loads
- Application: TP4056 module can charge for single-cell lithium battery or multi-section parallelled lithium batteries, can be powered by USB ports; The module with USB port, can be directly input to do with rechargeable lithium battery as a phone charger
- Note: When first accessing the battery, there may be no voltage output between OUT+/OUT-, at this time access to 5V charging can activate the protection circuit, the battery is disconnected from B+/B- and then connected again also need to be charged to activate the protection circuit. When using a mobile phone charger as input, the charger should be able to output 1A or above, otherwise it may not charge properly.
- Attention: The charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will damage directly
- Reminder: Please check all the connections before charging, it will be damaged if the load OUT on the positive and negative with wrong polarity. If you do this the first time, please watch the video on Youtube before installation
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Dimensions: 2.00 x 2.70 x 0.90 inches
Warranty: No Warranty
See On Amazon #5
6pcs 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 18650 Lithium Battery Charging Boost Mobile Power Protection PCB Board Module
Asin: B07PZT3ZW2 | Model: . | PartNumber: . | Ean: 0673400168474 | UPC: 673400168474
★ In Discharge Mode (The Charging Mode Key Function Is Invalid), Trigger The Key Port Once To Open The Output; Continuously Trigger The Key Port Twice To Close The Output.
★ Allow Discharge While Charging. (Note: At This Time Output Voltage 4.7 / 5V).
★ The First Time The Load Is Connected, The Output Is Automatically Turned On. If The Load Is Less Than 50Ma, The Output Will Be Automatically Turned Off After 30 Seconds; If The Load Is Greater Than 50Ma, The Output Will Be Automatically Turned On.
★ 4 In 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium Battery Protection Function: Over-Current, Overvoltage, Over-Temperature, Short Circuit Protection.
Features
- MCU users, if you accept a small load KEY can be connected to the microcontroller about 20s to provide a low level allows the module to continue working. Trigger mode: low level trigger (ground)
- 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection
- In discharge mode (The charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output
- The first time the load is connected, the output is automatically turned on. If the load is less than 50mA, the output will be automatically turned off after 30 seconds; if the load is greater than 50mA, the output will be automatically turned on
- Allow discharge while charging. (Note: At this time output voltage 4.7 / 5V)
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Dimensions: 0.39 x 0.98 x 0.63 inches
See On Amazon #6
UMLIFE 4pcs 18650 Charging Board Dual USB 5V 2.4A Mobile Power Bank Module 186 50 Lithium Battery Charger Board with Overcharge Overdischarge Short Circuit Protection DIY USB Power Bank Board
Asin: B097ZLJH8L | Ean: 0701715467187 | UPC: 701715467187
Overcharge Protection, Overdischarge Protection, Short Circuit Protection, Constant Current.Suggest Working Conditions:Max Continuous Charge/Discharge Current 1.5/2.4A,Working Temperature: -5～45℃..
Size: 6.5 * 2.5 * 0.1Cm;.
Charging Cable: Support Three Usb Data Cable Charging, Including For Iphone And Android..
Dual Output Current: 5V 2.4A；Constant Current: 2.4A;.
Features
- Attention : The positive pole of the battery is connected to B+ and the negative pole is connected to B-, do not reverse it. If it is reversed, it will burn out
- Dual Output Current: 5V 2.4A Constant Current: 2.4A;
- overcharge protection, overdischarge protection, short circuit protection, constant current.Suggest Working Conditions:Max continuous charge/discharge current 1.5/2.4A,working temperature: -5 45 .
- Charging cable: support three USB data cable charging, including for Iphone and Android.
- Size: 6.5 * 2.5 * 0.1cm;
- See more on Amazon...
Brand: UMLIFE | Manufacturer: UMLIFE
Weight: 0.02 pounds
See On Amazon #7
8PCS 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 18650 Lithium Battery Charging Boost Mobile Power Supply Charge and Discharge Protection Converter Protection PCB Board Module
Asin: B0836J8LR4 | Model: UMLIFE-001 | PartNumber: UMLIFE-001 | Ean: 0701715435162 | UPC: 701715435162
❃❃ The Output Opens Automatically At The First Time The Load Is Connected.If The Load Is Less Than 50Ma, Automatically Close The Output After 30 Seconds;If The Load Is Greater Than 50Ma, The Output Opens Automatically..
❃❃ Can Be Applied To Solar Panel Turning To Mobile Phone Charging, Car Charging Retrofit, Driving Recorder Power Supply, Household Power Supply, Intelligent Plugging Transformation, Fast Charging Adapter, Etc..
❃❃ High Power High Efficiency: Discharge Efficiency Up To 96%. In Discharge Mode (The Charging Mode Key Function Is Invalid), Trigger The Key Port Once To Open The Output; Continuously Trigger The Key Port Twice To Close The Output..
❃❃ 4 In 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium Battery Protection Function: Over-Current, Overvoltage, Over-Temperature, Short Circuit Protection..
Features
- MCU users, if you accept a small load KEY can be connected to the microcontroller about 20s to provide a low level allows the module to continue working. Trigger mode: low level trigger (ground).
- 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection.
- The output opens automatically at the first time the load is connected.If the load is less than 50MA, automatically close the output after 30 seconds;If the load is greater than 50MA, the output opens automatically.
- High Power High Efficiency: Discharge efficiency up to 96%. In discharge mode (The charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output.
- Can be applied to solar panel turning to mobile phone charging, car charging retrofit, driving recorder power supply, household power supply, intelligent plugging transformation, fast charging adapter, etc.
- See more on Amazon...
Brand: UMLIFE | Manufacturer: UMLIFE
Weight: 0.04 pounds
See On Amazon #8
AEDIKO 10pcs 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 18650 Lithium Battery Charging Boost Mobile Power Protection PCB Board
Asin: B09JZFXD1X | Ean: 0701715485921 | UPC: 701715485921
Protection Functions: 4 In 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module.Lithium Battery Protection Function:Over-Current Protection,Over-Voltage Protection, Over-Temperature Protection, Short Circuit Protection.
Application:2A 5V Module Widely Used For Mobile Power, Car Charging Retrofit,Driving Recorder Power Supply And Portable Devices Such As Mobile Phones And Tablets.
Note:The First Time The Load Is Connected, Output Is Automatically Turned On. If The Load Is Less Than 50Ma, The Output Will Be Automatically Turned Off After 30S; If The Load Is Greater Than 50Ma, The Output Will Be Automatically Turned On.
Mcu Users: If You Accept A Small Load Key Can Be Connected To The Microcontroller About 20S To Provide A Low Level Allows The Module To Continue Working. Trigger Mode: Low Level Trigger (Ground).
Features
- 2A 5V Lithium Battery Charging Protection Module:Output Voltage: 5V; Charging Current: 0-2.1A;Charging Voltage: DC 4.5V-5.5V (DC 5V Recommended)
- MCU Users: if You Accept a Small Load KEY Can be Connected to the Microcontroller about 20s to Provide a Low Level Allows the Module to Continue Working. Trigger Mode: Low Level Trigger (Ground)
- Protection Functions: 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module.Lithium Battery Protection Function:Over-Current Protection,Over-Voltage Protection, Over-Temperature Protection, Short Circuit Protection
- NOTE:The First Time the Load is Connected, Output is Automatically Turned On. If the Load is Less than 50MA, the Output will be Automatically Turned Off after 30s; if the Load is Greater than 50MA, the Output Will be Automatically Turned On
- Application:2A 5V Module Widely Used for Mobile Power, Car Charging Retrofit,Driving Recorder Power Supply and Portable Devices Such As Mobile Phones and Tablets
- See more on Amazon...
Brand: AEDIKO | Manufacturer: AEDIKO
See On Amazon #9
CHENBO 10 Pcs 5V Micro USB 1A 18650 TP4056 Lithium Battery Charging Board with Protection Charger Module
Asin: B06XCXPY86 | Model: 4333092022 | PartNumber: 4333092022 | Ean: 6923074054820
Input Voltage: 5V.
Inputs With Micro Usb Female, Can Be Directly Input To Do With The Phone Charger Rechargeable Lithium Battery.
Connect The Battery To The B + B-, Inserted Into The Usb Female Mobile Phone Charger, The Red Light Is Being Charged, The Green Light To Full..
Maximum Charge Current: 1000Ma.
Features
- Charging cut-off voltage: 4.2V 1%
- Maximum charge current: 1000mA
- Input voltage: 5V
- Connect the battery to the B + B-, inserted into the USB female mobile phone charger, the red light is being charged, the green light to full.
- Inputs with MICRO USB female, can be directly input to do with the phone charger rechargeable lithium battery
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
Weight: 0.04 pounds
See On Amazon #10
JacobsParts Smallest USB Type C 3.7V Lithium Battery Charger Board 4.2V Charging Module with Protection Circuit and LED Charge Indicators 5V USB-C Input (10 Pack)
Asin: B0CBNQW58M | Model: CPNT-E-10PK | PartNumber: CPNT-E-10PK | Ean: 0845832035147 | UPC: 845832035147
Incorporates Automatic Charge Cycle Termination And Resumption For Efficient Charging.
Compact And Lightweight Design (14×18×5Mm), Easy To Install And Use..
Integrates Safety Features Including Over-Current, Over-Voltage, And Under-Voltage Protection For Secure Charging.
Charges To 4.2V, Provides 100Ma Pre-Charging For Batteries With Voltages Under 2.9V.
Features
- An ultra-small, 1A charging board for 3.7V lithium batteries with USB Type-C power input and LED charge indicators
- Charges to 4.2V, provides 100mA pre-charging for batteries with voltages under 2.9V
- Incorporates automatic charge cycle termination and resumption for efficient charging
- Integrates safety features including over-current, over-voltage, and under-voltage protection for secure charging
- Compact and lightweight design (14 18 5mm), easy to install and use.
- See more on Amazon...
Brand: JacobsParts | Manufacturer: JacobsParts
Dimensions: 0.20 x 0.71 x 0.55 inches
Warranty: 1 year manufacturer
See On Amazon #11
AITIAO 15pcs Type-C USB 3.7V 4.2V 1A Lithium Battery Charger Module Fast Charging Board with Protection
Asin: B0BVR4FXY1 | Ean: 0701715566781 | UPC: 701715566781
With Protection Board, Over-Voltage Protection, Over-Discharge Protection, And Over-Current Protection. Over-Discharge Protection Value 2.4V, Over-Current Protection Value: 4A..
Package&Warranty: 15Pcs Type-C Usb 3.7V 4.2V 1A Lithium Battery Charging Protection Board. If You Have Any Question About The Product Please Contact Us..
Tip: The First Time You Use It, You Need To Connect The Power Supply To Activate The Charging Protection Board! If You Are The First Time To Do This Job, We Suggest You Can Watch Related Video On The Internet Before Installation..
Suitable For All Types Of 3.7V Lithium Batteries,Small Appliances Modification And Tablet Pc Retrofit Charging Port. Suitable For Single Lithium Battery (Parallel Connection Is Not Limited, Can Not Be Connected In Series)..
Features
- Input Voltage: 5V; current: 1A; Charging cut-off voltage: 4.2V/4.35V optional; Input interface: Type-C USB
- Suitable for all types of 3.7V lithium batteries,small appliances modification and tablet PC retrofit charging port. Suitable for single lithium battery (parallel connection is not limited, can not be connected in series).
- With protection board, over-voltage protection, over-discharge protection, and over-current protection. Over-discharge protection value 2.4V, over-current protection value: 4A.
- Tip: The first time you use it, you need to connect the power supply to activate the Charging protection board! If you are the first time to do this job, we suggest you can watch related video on the Internet before installation.
- Package&warranty: 15pcs Type-C USB 3.7V 4.2V 1A lithium battery charging Protection board. If you have any question about the product please contact us.
- See more on Amazon...
Brand: AITIAO | Manufacturer: AITIAO
See On Amazon #12
AOICRIE Dual USB 18650 Battery Charger Protection Module 4pcs, Power Bank PCB Module Board, Dual USB 5V 1A 2.1A
Asin: B08S3GQF3B | Ean: 0701715447554 | UPC: 701715447554
Led Indicator And Lcd Display: When Charging, The Display Will Show In Letters; After The Load Is Connected, Long Press The Led Light Button To Start The Output, And The Display Will Show Out Letters And The Relative Output Voltage And Current 5V1a Or 5V2.1A..
Note: The Positive Pole Of The Battery Is Connected To B+ And The Negative Pole Is Connected To B-, Do Not Reverse It. If It Is Reversed, It Will Burn Out!!!!.
The Protection Circuit Of The Boosted Lithium Battery Has Been Integrated, Prevent Over-Discharge, Over-Charge, Overload Short Circuit Protection, Over Current Protection, And Over Temperature Protection..
The Word "In" Will Be Shown In The Display; Output Indication: Long Press The Led Button After Turning On The Load, Start Output, The Word "Out" And The Current And Voltage Of 5.0V1.0A Or 5.0V2.1A Will Be Displayed In The Display..
Features
- It is possible to connect only one lithium battery or multiple lithium batteries in parallel. The capacity of connected battery is no more than 200,000 mA, As long as the battery with a voltage of 3.0-4.2V can be used.
- The word IN will be shown in the display; Output indication: Long press the LED button after turning on the load, Start output, The word OUT and the current and voltage of 5.0V1.0A or 5.0V2.1A will be displayed in the display.
- LED indicator and LCD display: When charging, the display will show IN letters; after the load is connected, long press the LED light button to start the output, and the display will show OUT letters and the relative output voltage and current 5V1A or 5V2.1A.
- The protection circuit of the boosted lithium battery has been integrated, prevent over-discharge, over-charge, overload short circuit protection, over current protection, and over temperature protection.
- Note: The positive pole of the battery is connected to B+ and the negative pole is connected to B-, do not reverse it. If it is reversed, it will burn out!!!!
- See more on Amazon...
Brand: AOICRIE | Manufacturer: Aoicrie
See On Amazon #13
Discharge Integrated Charging Protection Module :6pcs 2A 5V Module 3.7V 4.2V for 186 50 Lithium Battery Charging Boost Mobile Power Protection PCB Board
Asin: B0BGJJ4YXR
Discharge Mode: (The Charging Mode Key Function Is Invalid), Trigger The Key Port Once To Open The Output; Continuously Trigger The Key Port Twice To Close The Output.
Note: Allow Discharge While Charging. (Note: At This Time Output Voltage 4.7 / 5V).
Ioad Connection : The First Time The Load Is Connected, The Output Is Automatically Turned On. If The Load Is Less Than 50Ma, The Output Will Be Automatically Turned Off After 30 Seconds; If The Load Is Greater Than 50Ma, The Output Will Be Automatically Turned On.
Protective Function : 4 In 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium Battery Protection Function: Over-Current, Overvoltage, Over-Temperature, Short Circuit Protection.
Features
- Charging voltage: DC 4.5V-5.5V (DC 5V recommended) Charging current: 0-2.1A Charging quiescent current: 100uA Full voltage: 4.2V+ -1% Discharge current: 0-2.4A Discharge quiescent current: 50uA Discharge efficiency: up to 96% Output voltage: 5V Output current: 0-2.4A Ambient temperature: -20 to + 85 PCB board process: Shen Jin Size : 25 * 16 * 4mm
- Protective function : 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection
- Discharge mode: (The charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output
- Ioad Connection : The first time the load is connected, the output is automatically turned on. If the load is less than 50MA, the output will be automatically turned off after 30 seconds; if the load is greater than 50MA, the output will be automatically turned on
- Note: Allow discharge while charging. (Note: At this time output voltage 4.7 / 5V)
- See more on Amazon...
Brand: TAHULU | Manufacturer: TAHULU
Dimensions: 0.20 x 0.98 x 0.59 inches
See On Amazon #14
HiLetgo 5pcs TP4057 1A 3.7V Lithium Battery Charging and Discharging Board with Protection Type-C USB C Li-ion Battery Charging Board Over TP4056
Asin: B0CDWXM6K9 | Model: 3-01-1768 | PartNumber: 3-01-1768
Type-C Usb C Li-Ion Battery Charging Board.
Dual Output Of Charging Status, No Battery And Fault Status Display.
Constant Current/Constant Voltage Charging With Over-Temperature Protection.
Tp4057 Charging & Discharging In One Board.
Features
- TP4057 1A 3.7V Lithium Battery Charging & Discharging Board
- TP4057 Charging & Discharging in One Board
- Type-C USB C Li-ion Battery Charging Board
- Constant current/constant voltage charging with over-temperature protection
- Dual output of charging status, no battery and fault status display
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #15
10Pcs TP4056 3.7V 4.2V 9V 5V 2A Adjustable DC-DC Step Up Boost Module 18650 Lithium Li-ion Battery Charger Discharge Power Board DIY Kit Parts
Asin: B09WD9GCZC | Model: 13366-1 | PartNumber: 13366-1 | Ean: 0701715510654 | UPC: 701715510654
Battery Charger Module Combines The Tp4056 Battery Charger With A Boost Circuit. Adds A Battery And Converts A Low Power Dc Device To A Usb Rechargeable Device..
Before Use, Before Debugging, The Default Output Is About 9V. Input Voltage 4.5-8V The Output Voltage Can Be Continuously Adjusted 4.3-27V (4.3V Or More, 27V Or Less, Any Voltage Can Be Output, You Can Adjust The Voltage Counterclockwise) Charging Voltage 4.2V Charging Current Is 1A Discharge Current 2A Output Current To Calculate Output Reference Maximum Current 5V 1.4A , 9V 0.8A, 12V 0.6A Static Current Is About 0.5 Ma.
Instructions For Use: Tp4056 Charger Module Can Be Used For Multimeter To Convert To Charge Lithium Batteries. Vin+ Port Input 5V Solar Panel, Bat+ Port Can Output 4.2V To Charger 3.7V 18650 Battery..
Battery Charger Module Made Of Electronic Components.Can Be Used For Multimeter, Converted To Lithium Battery Charging..
Features
- TP4056 3.7V module input: 4.5-8V DC; Output: 4.3-27V DC (Adjustable); Battery charge termination voltage: 4.2V; Battery charge current: 1A Max; Battery Discharge current: 2A Max ; Maximum DC Output: 7W ( 5V 1.4A / 9V 0.8A / 12V 0.6A )
- Battery charger module made of electronic components.Can be used for multimeter, converted to lithium battery charging.
- Battery charger module combines the TP4056 battery charger with a boost circuit. Adds a battery and converts a low power DC device to a USB rechargeable device.
- Instructions for use: TP4056 Charger Module can be used for multimeter to convert to charge lithium batteries. VIN+ port input 5V solar panel, BAT+ port can output 4.2V to charger 3.7V 18650 battery.
- Before use, before debugging, the default output is about 9V. Input voltage 4.5-8V The output voltage can be continuously adjusted 4.3-27V (4.3V or more, 27V or less, any voltage can be output, you can adjust the voltage counterclockwise) Charging voltage 4.2V Charging current is 1A Discharge current 2A output current to calculate Output reference maximum current 5V 1.4A , 9V 0.8A, 12V 0.6A Static current is about 0.5 mA
- See more on Amazon...
Brand: Shutao | Manufacturer: Shutao
See On Amazon #16
Bistook 9pcs 18650 or 21700 Charging Board Dual USB 5V 3A Mobile Power Bank Module 18650 Lithium Battery Charger Board with Overcharge Overdischarge Short Circuit Protection DIY USB Power Bank Board
Asin: B0BYTCCYTY | Model: bistook118 | PartNumber: bistook118 | Ean: 0760627179229 | UPC: 760627179229
3.Protocol Protection：Overcharge Protection, Overdischarge Protection, Short Circuit Protection, Constant Current..
5.Warm Tips & Satisfactory Service：This Product Issuitable For Diy.If There Are Any Issues With The Product, It Can Be Returned Within 30 Days Of Receipt In Its Original Condition For A Full Refund Or Replacement. If You Have Any Questions, Please Contact Us..
4.Convenience：The Charging Board Supports 18650,21700 Lithium Batteries Or Polymer Lithium Batteries, Allowing You To Quickly Diy To Create Your Own Power Bank Supply Or Battery Charger. It Outputs A Maximum Current Of 5V/3.0A, Which Is Convenient To Provide Power For Devices With Larger Battery Capacity, Such As Mobile Phones And Tablet Computers, And Provide Power Anytime And Anywhere, Providing You With Flexibility And Convenience!.
2.Two Ports：The Charging Board Is Designed With A Transmission Usb-C Input And Output Port And 1 Usb-A Output Port. The Usb-C Supports Maximum Output And Input Pd18w And Supports Protocol Pd3.0/2.0, While Usb-A Outputs 5V3a, 9V2a, 12V1.5A, Support Protocol Qc3.0/2.0, Afc, Fcp, Pe1.1/2.0, Sfcp, Bc1.2, Dcp..
Features
- 1.Indicator light Equipped with LED remaining indicator,with one light representing 25%.Pressing the button can view the battery level indicator, making it convenient for you to check the battery level.
- 2.Two ports The charging board is designed with a transmission USB-C input and output port and 1 USB-A output port. The USB-C supports maximum output and input PD18W and supports protocol PD3.0/2.0, while USB-A outputs 5V3A, 9V2A, 12V1.5A, support protocol QC3.0/2.0, AFC, FCP, PE1.1/2.0, SFCP, BC1.2, DCP.
- 3.Protocol Protection overcharge protection, overdischarge protection, short circuit protection, constant current.
- 4.Convenience The charging board supports 18650,21700 lithium batteries or polymer lithium batteries, allowing you to quickly DIY to create your own power bank supply or battery charger. It outputs a maximum current of 5V/3.0A, which is convenient to provide power for devices with larger battery capacity, such as mobile phones and tablet computers, and provide power anytime and anywhere, providing you with flexibility and convenience!
- 5.Warm Tips & Satisfactory Service This product issuitable for DIY.If there are any issues with the product, it can be returned within 30 days of receipt in its original condition for a full refund or replacement. If you have any questions, please contact us.
- See more on Amazon...
Brand: Bistook | Manufacturer: Bistook
Dimensions: 0.43 x 1.08 x 0.85 inches | Weight: 0.10 pounds
Warranty: 1 year manufacturer
See On Amazon #17
5PCS 3.7V 4.2V Lithium Liion Battery Charger Board Adjustable DC-DC Step Up Module Boost Charge Discharge Integrated Module TP4056 DIY Kit Parts
Asin: B091F5PTY2 | Ean: 0701715460409 | UPC: 701715460409
Note: The Out+Port Can Output An Adjustable Voltage..
Package Included: 5 X Step Up Boost Module.
Application:The Module Can Be Can Be Used For Multimeter, Converted To Lithium Battery Charging. For Example: Vin+Port Input 5V Solar Panels, Bat+Port Can Output 4.2V To Charger 3.7V 18 650 Battery.
Input Voltage: 4.5-8V Dc; Output Voltage: 4.3-27V Dc (Continuously Adjustable); Charging Voltage: 4.2V Dc; Charging Current: Max. 1A; Discharging Current: Max. 2A.
Features
- The charge boost and discharge integrated module for 3.7V Lithium Battery
- Input voltage: 4.5-8V DC; Output voltage: 4.3-27V DC (Continuously adjustable); Charging voltage: 4.2V DC; Charging current: Max. 1A; Discharging current: Max. 2A
- NOTE: The OUT+Port can output an adjustable voltage.
- Application:The module can be can be used for multimeter, converted to lithium battery charging. For example: VIN+Port input 5V solar panels, BAT+port can output 4.2V to charger 3.7V 18 650 battery
- Package included: 5 x Step Up Boost Module
- See more on Amazon...
Brand: Atnsinc | Manufacturer: Atnsinc
Weight: 0.04 pounds
See On Amazon #18
Aliotech 4Pcs 5V Micro USB 1A 18650 TP4056 Lithium Battery Charging Board with Protection Charger Module
Asin: B091N5L7J2 | Ean: 0727536769880 | UPC: 727536769880
On-Board Micro Usb And Soldering Joints 5V Input`Port And Charging Status Indicator(Red Indicator Is Charging,Green Indicator Is Full Charged).
Package Includes 4Pcs Micro Usb 1A 18650 Tp4056 Lithium Battery Charging Board With Protection Charger Module.
Current: 3A, Board Size: 26 X 17Mm/1.02 X 0.67Inch(L*W).
Input Voltage: Dc5v,Charging Cut-Off Voltage: 4.2V Maximum Charging Current: 1A.
Features
- Micro usb lithium battery charging board with overcharge, overdischarge and overcurrent protection
- Input Voltage: DC5V,Charging Cut-off Voltage: 4.2V Maximum Charging Current: 1A
- On-board micro USB and soldering joints 5V input`port and charging status indicator(red indicator is charging,green indicator is full charged)
- Current: 3A, Board Size: 26 X 17mm/1.02 X 0.67inch(L*W)
- Package includes 4pcs Micro USB 1A 18650 TP4056 Lithium Battery Charging Board with Protection Charger Module
- See more on Amazon...
Manufacturer: DaDa MFG
See On Amazon #19
(5 Pack) JacobsParts Micro-USB TP4056 3.7V Battery Charger Module 7W DC UPS with Adjustable Step-up Boost Output 5V 9V 12V 27V
Asin: B08NTZ953V | Model: CPNT-D-5PK | PartNumber: CPNT-D-5PK | Ean: 0845832031736 | UPC: 845832031736
Input: 4.5-8V Dc • Output: 4.3-27V Dc (Adjustable) • Battery Charge Termination Voltage: 4.2V • Battery Charge Current: 1A Max.
Size: 3.3X2.3Cm.
Battery Discharge Current: 2A Max • Maximum Dc Output: ~7W ( 5V 1.4A / 9V 0.8A / 12V 0.6A ).
Make A Rechargeable Multimeter • Add Battery Backup To An Ethernet Switch.
Features
- Module combines a TP4056 battery charger with a MT3608 boost circuit. Add a battery and turn low powered DC devices into USB rechargeable devices.
- Make a rechargeable multimeter Add battery backup to an Ethernet switch
- Input: 4.5-8V DC Output: 4.3-27V DC (Adjustable) Battery charge termination voltage: 4.2V Battery charge current: 1A Max
- Battery Discharge current: 2A Max Maximum DC Output: ~7W ( 5V 1.4A / 9V 0.8A / 12V 0.6A )
- Size: 3.3x2.3cm
- See more on Amazon...
Brand: JacobsParts | Manufacturer: JacobsParts
Weight: 0.13 pounds
See On Amazon #20
WSDMAVIS 2 Pcs 5V Charging Board Type-C 2A 2 in 1 Charge Discharge Module 4.2V 18650 Lithium Li-ion Battery Charger Board DIY
Asin: B08R9QTD5S | Model: WS358 | PartNumber: WS358 | Ean: 0779675958991 | UPC: 779675958991
When The Load Current Is Less Than 50Ma Continuously, The Output Will Be Turned Off.When The Charging Current Drops To 100Ma After Reaching The Final Floating Charge Voltage, The Charging Cycle Will Be Automatically Terminated.When The Battery Voltage Drops Below 4.1V, The Charging Cycle Starts Again；When The Battery Voltage Is Lower Than 2.8V, The Battery Will Be Pre Charged At 180Ma..
Note： The Item Is Not Suitable For 3.2V Lifepo4 Batteries.Power Off Is Needed To Adjust The Charging Voltage Setting..
Usb-A Base Welding Position Is Provided On The Back Of The Product, Which Can Be Installed Manually.It Supports Discharging While Charging.Support External Key, Connect The Key To K Point And Output Negative Pole, Short Press To Turn On Power Display And 5V Output.Continuous Two Short Presses Will Turn Off The Power Display And Turn Off The 5V Output..
Input Voltage Range: 5 ~ 5.5V；Charging Cut-Off Voltage:4.2V± 0.5%；Charging Current: 2.4A ± 5%；Boost Output Voltage: 5V ~ 5.15V (Line Loss Compensation)；Boost Output Voltage Ripple: 100Mv；Boost Output Current: 2A；Boost Conversion Efficiency: 92.5% (3.6V Input, 5V 2A)Output；Battery End Quiescent Current: <30Ua.
Features
- Type-C input.4.20V fit almost all normal 3.7V lithium li-ion battery.If want to charge to 100%, recommend to buy the 4.35V version.
- Input voltage range: 5 ~ 5.5V Charging cut-off voltage:4.2V 0.5% Charging current: 2.4A 5% Boost output voltage: 5V ~ 5.15V (line loss compensation) Boost output voltage ripple: 100mV Boost output current: 2A Boost conversion efficiency: 92.5% (3.6V input, 5V 2A)Output Battery end quiescent current: <30uA
- When the load current is less than 50mA continuously, the output will be turned off.When the charging current drops to 100mA after reaching the final floating charge voltage, the charging cycle will be automatically terminated.When the battery voltage drops below 4.1V, the charging cycle starts again When the battery voltage is lower than 2.8V, the battery will be pre charged at 180mA.
- Usb-a base welding position is provided on the back of the product, which can be installed manually.It supports discharging while charging.Support external key, connect the key to K point and output negative pole, short press to turn on power display and 5V output.Continuous Two short presses will turn off the power display and turn off the 5V output.
- Note the item is not suitable for 3.2V LifePo4 batteries.Power off is needed to adjust the charging voltage setting.
- See more on Amazon...
Brand: WSDMAVIS | Manufacturer: WSDMAVIS
See On Amazon
Looking For Something Else?
Search