SmallRig 5" Quick Release Plate for Manfrotto-Type Compatible with DJI RS 4 / RS 4 Pro/RS 2 / RSC 2 / Ronin-S/RS 3 / RS 3 Pro Gimbal - 3158B
Asin: B08TC51H8Z | Model: 3158-SR-FBA | PartNumber: 3158-SR-FBA
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Prevent Twisting Design】The Qr Plate Features Two Mounting Screws To Prevent Twisting. Also, The Padding On Top Protects Your Camera From Scratching..
【Optional Mounting Points】This Qr Plate 3158 Allows You To Mount Optional Counterweights Or Counterweight Kit 3125 Via The 1/4"-20 Thread On The Bottom. It Also Features Three M4 Threaded Holes, Compatible With The Original Follow Focus Rod Mount..
【Removable Gear Rack】There Is A Removable Gear Rack On The Bottom That Helps Position Your Camera In Small Increments, And The Measurement Scales Also Allow You To Keep Balancing Position For Your Camera..
【Switch Quickly】The Smallrig Qr Plate 3158 Features For Manfrotto Standard Plate, Assisting The Camera In Quickly Switching Between The Tripod (For Manfrotto), Shoulder, Gimbal, And Other Shooting Modes..
Features
- For Selected Gimbals SmallRig 5" Quick Release Plate for Manfrotto-Style 3158 is exclusively ONLY designed for DJI RS 4 / RS 4 Pro / RS 2 / RSC 2 / Ronin-S / RS 3 / RS 3 Pro gimbal.
- Switch Quickly The SmallRig QR Plate 3158 features for Manfrotto standard plate, assisting the camera in quickly switching between the tripod (for Manfrotto), shoulder, gimbal, and other shooting modes.
- Prevent Twisting Design The QR Plate features two mounting screws to prevent twisting. Also, the padding on top protects your camera from scratching.
- Removable Gear Rack There is a removable gear rack on the bottom that helps position your camera in small increments, and the measurement scales also allow you to keep balancing position for your camera.
- Optional Mounting Points This QR Plate 3158 allows you to mount optional counterweights or counterweight kit 3125 via the 1/4-20 thread on the bottom. It also features three M4 threaded holes, compatible with the original follow focus rod mount.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 0.75 x 5.08 x 1.97 inches | Weight: 0.19 Pounds
See On Amazon Similar To SmallRig 5 Quick Release Plate
#1
SmallRig Clamp w/ 1/4" and 3/8" Thread and 9.8 Inches Adjustable Friction Power Articulating Magic Arm with 1/4" Thread Screw for LCD Monitor/LED Lights - KBUM2732B
Asin: B087T4T8D5 | Model: KBUM2732B-SR | PartNumber: KBUM2732B-SR
【360°Rotation】Double 360 Degrees Ball Head Articulating Design Adjusts Any Angles Based On Your Needs. With 1/4" Thread On Both Ends To Install Any On-Camera Flash Lights, Microphone,Lcd Monitor,Dv Monitor, Microphone On One End And Other Accesorries Like Cage, Nato Rail 1973, 15Mm Rod 1182 And Quick Release Rod Clamp 1976 Etc.
【What You Can Get】Made Of Aluminum Alloy And Stainless Steel, Sturdy And Durable. Package Includes: A Super Clamp And A Articulating Magic Arm.
【Rubber Cushion】Both The Super Clamp And The Articulating Magic Arm Features A Rubber Cushion Which Could Prevent The Scratches Of Monitor And Help To Lock Your Accessories Tighter.
【Super Clamp】This Super Cool Clamp Was Made Of Lightweight Aluminum Alloy, Comes With 1/4"-20 And 3/8"-16 Thread And Can Be Mounted Virtually Anywhere, Such As Cameras, Lights, Umbrellas, Hooks, Shelves, Plate Glass, Cross Bars, Even Other Super Clamps. It Can Open Maximum 54Mm And Minimum 15Mm.
Features
- VERSATILITY SmallRig 2732 comes with a super clamp with 1/4" and 3/8" threads and an articulating arm with 1/4 screws on both ends respectively
- SUPER CLAMP This super cool clamp was made of lightweight aluminum alloy, comes with 1/4-20 and 3/8-16 thread and can be mounted virtually anywhere, such as cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps. It can open maximum 54mm and minimum 15mm
- 360 ROTATION Double 360 degrees Ball Head Articulating design adjusts any angles based on your needs. With 1/4 thread on both ends to install any on-camera flash lights, microphone,LCD monitor,DV Monitor, microphone on one end and other accesorries like cage, NATO Rail 1973, 15mm Rod 1182 and Quick Release Rod Clamp 1976 etc
- RUBBER CUSHION Both the Super Clamp and the Articulating Magic Arm features a rubber cushion which could prevent the scratches of monitor and help to lock your accessories tighter
- WHAT YOU CAN GET Made of aluminum alloy and stainless steel, sturdy and durable. Package includes: a Super Clamp and a Articulating Magic Arm
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 1.57 x 8.66 x 4.33 inches | Weight: 0.89 pounds
See On Amazon #2
SMALLRIG ZV-E10 Cage with Silicone Handle and Built-in Threaded Holes, Cold Shoe and Quick Release Plate for Sony ZV-E10-3538
Asin: B09GVH1JC1 | Model: 3538-SR | PartNumber: 3538-SR | Ean: 6941590006376
Multiple Mounting Options: The Cage Has Built-In Multiple 1/4"-20 Threaded Holes, 3/8"-16 Positioning Holes For Arri, Which Can Be Used With The Top Handle 1638, 1446, 1984 And 2165 For Low-Angle Shooting; It Can Also Be Installed With A Power Bank Clip Bub2336 To Fix The Power Bank Near The Camera For Continuous Power Supply. There Is A Built-In Cold Shoe On The Top And Bottom Of The Cage, Which Can Expand The Microphone 3468 And Led Video Light 3286 For A Complete Vlogging Solution..
Quick Release Plate For Arca-Swiss: The Quick Release Plate For Arca-Swiss At The Bottom Attaches Directly To The Tripod For Arca-Swiss Type For Quick Switching Between Handheld, Tripod And Stabilizer Shooting. The Bottom Threaded Holes Are Designed For The Quick Release Plate Of The Rs 3/Rs 3 Pro/Rs 2/Rsc 2 Stabilizer To Improve The Stabilizer Shooting Experience..
Power Backup Solution: Smallrig Np-Fw50 Camera Battery Charger Set Is Available Now, Two 1030Mah(Real) Rechargeable Batteries And A Charger Brings Long Battery Life For Your Videos And Photos Shooting, If You Need A Sufficient Power Supply, Please Search Smallrig Np-Fw50 Battery 3818.
Silicone Handle With Comfortable Grip: The Cage Has A Built-In Detachable Silicone Handle Designed According To Ergonomics. The Cage Is Fixed By A 1/4"-20 Screw At The Bottom, And The Camera Can Be Double-Fixed With The Included Anti-Deflection Lock To Further Prevent Deflection..
Enlarged Battery Compartment Space: The Space For The Battery Compartment At The Bottom Of The Cage Is Enlarged, Making It Easier For You To Change Memory Cards. The Cage Does Not Interfere With The Use Of Buttons, Card Slots, Battery Compartments, And Flip Screens. There Is A Slot In The Battery Compartment To Place The Dummy Battery Cable. When Using The Dummy Battery, The Camera Can Also Be Placed Flat On The Table..
Features
- Enlarged Hot Shoe Space: The new version of the cage enlarges the space around the camera hot shoe, and now you can use the cage together with the Microphone ECM-W2BT for Sony, Flash HVL-F32M or other accessories that require the use of the hot shoe on the top of the camera.
- Enlarged Battery Compartment Space: The space for the battery compartment at the bottom of the cage is enlarged, making it easier for you to change memory cards. The cage does not interfere with the use of buttons, card slots, battery compartments, and flip screens. There is a slot in the battery compartment to place the dummy battery cable. When using the dummy battery, the camera can also be placed flat on the table.
- Multiple Mounting Options: The cage has built-in multiple 1/4-20 threaded holes, 3/8-16 positioning holes for ARRI, which can be used with the Top Handle 1638, 1446, 1984 and 2165 for low-angle shooting; it can also be installed with a Power Bank Clip BUB2336 to fix the power bank near the camera for continuous power supply. There is a built-in cold shoe on the top and bottom of the cage, which can expand the Microphone 3468 and LED Video Light 3286 for a complete vlogging solution.
- Silicone Handle with Comfortable Grip: The cage has a built-in detachable silicone handle designed according to ergonomics. The cage is fixed by a 1/4-20 screw at the bottom, and the camera can be double-fixed with the included anti-deflection lock to further prevent deflection.
- Quick Release Plate for Arca-Swiss: The quick release plate for Arca-Swiss at the bottom attaches directly to the tripod for Arca-Swiss type for quick switching between handheld, tripod and stabilizer shooting. The bottom threaded holes are designed for the quick release plate of the RS 3/RS 3 Pro/RS 2/RSC 2 stabilizer to improve the stabilizer shooting experience.
- Power Backup Solution: SmallRig NP-FW50 camera battery charger set is available now, two 1030mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FW50 Battery 3818
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 2.36 x 3.15 x 3.15 inches | Weight: 0.17 pounds
See On Amazon #3
SmallRig Adjustable Camera Monitor Mount for ARRI-Style (Upgrade), 360 Swivel and 180 Tilt Monitor Holder Anti-Twist Support 5 and 7 Field Monitor- 2903B
Asin: B08JLZHYVC
Quickly Tightened: The Mount Can Tilt 180 Degree And And Swivel 360 Degree, Different With The Old Mode (2903) Using Allen Wrench, This Upgrade Monitor (2903B) Is Quickly Tightened Via A Knob To Suit Different Angle.
High Quality: Made Of Cnc-Machined Aluminum Alloy And Stainless Steel, Sturdy Enough To Support And Protect 5’’ And 7’’ Filed Monitor, Different Tilt Angle Has Different Load Capcaity, 90 Degree<4.2Kg, 45 Degree<2.5Kg, 30 Degree<2.3Kg.
Multiple Threaded Holes: Features Locating Screw For Arri At The Bottom To Connect Camera Cage And 1/4"-20 Threaded Holes For Magic Arm Or Stabilizer. 1/4"-20 Screw On The Top Support Monitor, Microphone, Light, Etc.
Dual Anti-Twist Design: The Camera Monitor Holder Bulid In Bouncy Locating Pins On The Top To Futher Secure Ninja V/ V+, And Silicone Pad To Prevent The Monitor From Scratching And Twisting.
Features
- For 5 and 7 Monitor: SmallRig adjustable monitor mount is designed to support 5 and 7 camera monitors via screw mount for ARRI on the top of camera cage or other mounting system
- Dual Anti-Twist Design: The camera monitor holder bulid in bouncy locating pins on the top to futher secure Ninja V/ V+, and silicone pad to prevent the monitor from scratching and twisting
- Quickly Tightened: The mount can tilt 180 degree and and swivel 360 degree, different with the old mode (2903) using Allen Wrench, this upgrade monitor (2903B) is quickly tightened via a knob to suit different angle
- Multiple Threaded Holes: Features locating screw for ARRI at the bottom to connect camera cage and 1/4-20 threaded holes for magic arm or stabilizer. 1/4-20 screw on the top support monitor, microphone, light, etc
- High Quality: Made of CNC-Machined aluminum alloy and stainless steel, sturdy enough to support and protect 5 and 7 filed monitor, different tilt angle has different load capcaity, 90 degree<4.2kg, 45 degree<2.5kg, 30 degree<2.3kg
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 1.34 x 1.65 x 1.61 inches | Weight: 0.20 pounds
See On Amazon #4
SmallRig Camera Base Plate with 15mm LWS Rod Rail Clamp, Baseplate for Sony A6500 A6600 A6300, for Canon R5 R6, for Sony A7SIII / A7III, Both for Cameras & Cages - 1674
Asin: B0197OP4PU | Model: 1674 | PartNumber: 1674 | Ean: 6972070622076
【Scientific Thread Arrangement】With 1/4''-20 & 3/8''-16 Threads On The Bottom, This Base Plate Can Be Attached To Quick Release Plate And Then Be Attached On Any Tripod Such As Smallrig Freeblazer Carbon Fiber Tripod 3989 (Not Included)..
【What You Get】1 X Base Plate; 1 X 1/4'' Fixing Screw; 1 X 3/8'' Fixing Screw; 2 X 1/4''-20 Screw; 1 X Hex Spanner.
【Easily Attachment On Cameras/Cages】The Base Plate Comes With 1/4 And 3/8 Screws And Can Be Used On The Camera Cages, Or Directly On Cameras. This Solid Baseplate Features Rubber Padding On Top Of The Plate To Prevent Twisting And Scratching..
【15Mm Lws Rod Support】The Base Plate Features 15Mm Diameter And 60Mm Spaced Rod Holes That Allow You To Mount A Follow Focus, Matte Box, Lens Support, Or Other Accessories. The Plate Is Contoured To Fit With Shoulder Pads While Also Remaining Lightweight..
Features
- Classic Universal Baseplate SmallRig Baseplate with Dual 15mm Rod Clamp 1674 is a simple and light base plate for the currently popular cameras and camera cages, such as for Sony A6500/A6300/A6600, for Sony A7SIII/A7RV/ ZVE-10, for Canon R5 R6, for Fujifilm XT-5, etc. The baseplate assists the camera to switch quickly between the tripod, shoulder, and other shooting modes.
- 15mm LWS Rod Support The base plate features 15mm diameter and 60mm spaced rod holes that allow you to mount a follow focus, matte box, lens support, or other accessories. The plate is contoured to fit with shoulder pads while also remaining lightweight.
- Scientific Thread Arrangement With 1/4''-20 & 3/8''-16 threads on the bottom, this base plate can be attached to quick release plate and then be attached on any tripod such as SmallRig FreeBlazer Carbon Fiber Tripod 3989 (not included).
- Easily Attachment on Cameras/Cages The base plate comes with 1/4 and 3/8 screws and can be used on the camera cages, or directly on cameras. This solid baseplate features rubber padding on top of the plate to prevent twisting and scratching.
- What You Get 1 x base plate; 1 x 1/4'' fixing screw; 1 x 3/8'' fixing screw; 2 x 1/4''-20 screw; 1 x hex spanner
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 1.02 x 3.15 x 1.69 inches | Weight: 0.37 pounds
See On Amazon #5
SmallRig V-Mount Battery Plate, V Lock Battery Mounting Plate with Double Quick Release Plate for Arca-Swiss, L-Shape Compact & Foldable V Mount Battery Plate for DSLR Camera, Gimbals & Tripod - 4064B
Asin: B0C1NHKRFR | Model: 4064 | PartNumber: 4064 | Ean: 6941590012445
Widely Compatibility: This V-Mount Battery Plate Is Very Versatile And Universal, It Is Suitable For Most Camera Models On The Market, For Mirrorless / Dslr Cameras Less Than 111Mm Thick, Like For Sony Alpha 7R V / Alpha 7 Iv / Alpha 7S Iii / Alpha 7C / Fx3 / Fx30, For Canon Eos R5c / R5 / R6 / R6 Mark Ii / R7 / R10 / R / Rp, For Panasonic Lumix S1h / S1r / S1 / S5 / S5 Ii / Gh6 / Gh5..
Smart Rotatable Design: The V-Mount Plate Can Be Rotated And Adjusted By 180°. Adjust Forward For Convenient Storage, Adjust Backward For Enough Space To Open The Camera Flip Screen. This Rotating Design Does Not Require You To Remove The Battery First, Which Effectively Saves Time. And It Also With Pivot Dampening Preventing Your Device From Falling..
Expand Your Creativity: This V-Mount Battery Plate Has A Mini V-Mount Plate With 1/4 "-20 Threads, Which Makes This V-Mounted Battery Plate Compatible With Np-F Battery Adapter Plate(Id:3168B) And Power Bank Holder(Id:Bub2336), Thus Realizing More Diversified Battery Solutions..
Double Quick Release Plate For Arca-Swiss: It Comes With Two Qr Plates For Arca, One Can Be Mounted On The Bottom Of The Camera Or Cage To Give Them Quick Release Functionality. The Other Can Be Mounted On The Bottom Of The Plate As You Require It To Enable Quick Switching Among Handheld, Stabilizer, And Tripod Shooting. If You Don't Need A Qr Plate For Arca, Then You Can Use The 1/4"-20 And 3/8"-16 Threaded Hole On The Bottom Of The Plate To Mount The Quick Release Plate You Need, Such As For Manfrotto Etc..
Stretchable Baseplate: The Baseplate Of This V-Mount Battery Plate Is Stretchable, And The Maximum Stretchable Distance Is 36.5 Mm / 1.43 Inch, Which Meets The Needs Of Cameras Of Different Sizes And Improves The Compatibility. Locking And Releasing The Rod Is Realized By A Toggle Lock, Which Is Fast And Time-Saving Without The Needs Of Tools..
Features
- Versatile and Compact Design: SmallRig V-mount battery plate 4064B adopts L-shaped design, which integrates quick release plate for Arca-Swiss, V-mount battery plate, stretchable rod and 1/4"-20 threads to realize quick installation and adjustment of camera and battery. Folding and lightweight design, only 117 mm x 31.5 mm, 230g, easy to store and carry round.
- Stretchable Baseplate: The baseplate of this V-mount battery plate is stretchable, and the maximum stretchable distance is 36.5 mm / 1.43 inch, which meets the needs of cameras of different sizes and improves the compatibility. Locking and releasing the rod is realized by a toggle lock, which is fast and time-saving without the needs of tools.
- Widely Compatibility: This V-mount battery plate is very versatile and universal, it is suitable for most camera models on the market, for Mirrorless / DSLR cameras less than 111mm thick, like for Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III / Alpha 7C / FX3 / FX30, for Canon EOS R5C / R5 / R6 / R6 Mark II / R7 / R10 / R / RP, for Panasonic LUMIX S1H / S1R / S1 / S5 / S5 II / GH6 / GH5.
- Double Quick Release Plate for Arca-Swiss: It comes with two QR plates for Arca, one can be mounted on the bottom of the camera or cage to give them quick release functionality. The other can be mounted on the bottom of the plate as you require it to enable quick switching among handheld, stabilizer, and tripod shooting. If you don't need a QR plate for Arca, then you can use the 1/4-20 and 3/8-16 threaded hole on the bottom of the plate to mount the quick release plate you need, such as for Manfrotto etc.
- Smart Rotatable Design: The V-Mount plate can be rotated and adjusted by 180 . Adjust forward for convenient storage, adjust backward for enough space to open the camera flip screen. This rotating design does not require you to remove the battery first, which effectively saves time. And it also with pivot dampening preventing your device from falling.
- Expand Your Creativity: This V-mount battery Plate has a mini V-mount plate with 1/4 -20 threads, which makes this V-mounted battery plate compatible with NP-F battery adapter plate(ID:3168B) and power bank holder(ID:BUB2336), thus realizing more diversified battery solutions.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 1.30 x 4.61 x 3.62 inches | Weight: 0.61 Pounds
Warranty: 2-Year Warranty (1-Year for Electronic Products)
See On Amazon #6
SmallRig Battery Plate with V-Lock Mount with Dual 15mm Rod Clamp for Camera Power Supply - 3016
Asin: B08RMR8X1Q | Model: 3016-SR | PartNumber: 3016-SR
【Multiple Mounting Points】The Plate Itself Features Multiple 1/4"-20 Countersinks, M3 Countersinks, M4 Countersinks, 1/4"-20 Thread Holes, M4 Thread Holes, And A Locating Hole For Arri To Attach A Dual Rod Clamp, A Magic Arm, Or Other Accessories..
【High Customization】Two Stoppers Will Prevent The Battery From Twisting When Attached. The Plate Is Also For Blackmagic Ursa Mini. (Note: 1. No V-Lock Part (Male) Provided With The Plate. 2. This Is Purely A Mounting Solution For A V-Mount Battery — No Power Ports On The Plate.).
【Related Products】Smallrig Mini V-Mount Battery Vb50 (50Wh) 3579 And Vb99 (99Wh) 3580 Are Now Available, Multi-Interfaces And Pd Fast-Charging Design, Widely Compatibility Use For Cameras, Camcorders, Monitors, Smartphones, Etc..
【Wide Compatibility】The Mount Features A V-Lock Mount With A Quick-Release Lever That Fits Most V-Mount Batteries, But It Is Not Compatible With Paglink Series V Mount Batteries Or Patona Premium Battery For Bp-190Ws. The Mount Has No Electronics And Is Meant To Mount A Battery That Has Its Own Power Outputs To Power Your Gear..
【Comes With Dual Rod Clamp】It Comes With A Dual 15Mm Rod Clamp, Which Allows You To Mount The Battery Plate Onto Standard 15Mm Lws Rods..
Features
- V-Lock Battery Plate SmallRig V Mount Battery Plate with Dual 15mm Rod Clamp 3016 utilizing a standard V mount fits most V mount batteries to provide more excellent battery life for your camera rig with your battery's power port(s).
- Comes with Dual Rod Clamp It comes with a dual 15mm rod clamp, which allows you to mount the battery plate onto standard 15mm LWS rods.
- Multiple Mounting Points The plate itself features multiple 1/4-20 countersinks, M3 countersinks, M4 countersinks, 1/4-20 thread holes, M4 thread holes, and a locating hole for ARRI to attach a dual rod clamp, a magic arm, or other accessories.
- Wide Compatibility The mount features a V-lock mount with a quick-release lever that fits most V-mount batteries, but it is not compatible with PAGlink series V mount batteries or Patona Premium Battery for BP-190WS. The mount has no electronics and is meant to mount a battery that has its own power outputs to power your gear.
- High Customization Two stoppers will prevent the battery from twisting when attached. The plate is also for Blackmagic URSA mini. (Note: 1. No V-Lock part (male) provided with the plate. 2. This is purely a mounting solution for a V-mount battery no power ports on the plate.)
- Related Products SmallRig mini V-mount Battery VB50 (50Wh) 3579 and VB99 (99Wh) 3580 are now available, multi-interfaces and PD fast-charging design, widely compatibility use for cameras, camcorders, monitors, smartphones, etc.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 0.67 x 5.24 x 4.25 inches | Weight: 0.42 Pounds
See On Amazon #7
SmallRig 9.8 inch Adjustable Articulating Magic Arm with Both 1/4" Thread Screw for LCD Monitor/LED Lights - 2066B
Asin: B076KDDBW5 | Model: 4335035730 | PartNumber: 4335035730
【Wide Compatibility】With 1/4" Thread On Both Ends To Install Any On-Camera Flash Lights, Microphone, Lcd Monitor, Dv Monitor, Smallrig Quick Release Plate 3513 On One End And Other Accesorries Like Cage, Nato Rail 1973, Side Handle 2093, 3813 Etc..
【Customer Service】Backed With 100% Satisfaction Guaranteed For Quality Problem; 24 H X 7 Customer Service Support..
【Rubber & Thread】Mounted With 1/4" Screw Is A O Ring Rubber Cushion Which Could Prevent The Scratches Of Monitor And Help To Lock The Monitor Tighter..
【Easy Position】Double 360 Degree Ball Head Articulating Design Adjusts Any Angles Based On Your Needs..
Features
- MAGIC ARM The precise and durable designed Articulating Magic Friction Arm provides great versatility for the positioning of access.
- EASY POSITION Double 360 degree Ball Head Articulating design adjusts any angles based on your needs.
- WIDE COMPATIBILITY With 1/4 thread on both ends to install any on-camera flash lights, microphone, LCD monitor, DV Monitor, SmallRig quick release plate 3513 on one end and other accesorries like cage, NATO rail 1973, side handle 2093, 3813 etc.
- RUBBER & THREAD Mounted with 1/4 screw is a O ring rubber cushion which could prevent the scratches of monitor and help to lock the monitor tighter.
- CUSTOMER SERVICE Backed with 100% satisfaction guaranteed for quality problem; 24 h x 7 Customer Service Support.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 0.98 x 5.51 x 2.36 inches | Weight: 0.46 pounds
See On Amazon #8
SmallRig Z f Handgrip L-Shape Grip for Nikon with Ergonomic Silicone Grip, Built-in Quick-Release Plate for Arca for Quickly Switch on Gimbal/Tripods/Handheld Shooting - 4262
Asin: B0CJFFT319 | Model: 4262-CF | PartNumber: 4262-CF
Compact And Lightweight - This Grip Plate Features An Ultra-Thin Design To Realize A Net Weight Of Only 102G, Making This Item More Compact And Lightweight..
Integrated Quick Release Plate For Arca - Integrated Qr Plate For Arca Allows For Fast Switching Between Handheld, Tripod, Or Gimbal For Dji Rs Mini. Three 1/4"-20 Threaded Holes In The Bottom Also Support Tripods (Eg. Tabletop Tripod But2664) And Qr Plates For Manfrotto, And Wrist Holes For Wrist Strap 3848 / 3926..
Ergonomic Silicone Grip - This Handgrip 4262 Comes With An Silicone Handle, Which Has Been Ergonomically Designed To Ensure A Comfortable And Secure Grip On The Camera,.
Tool-Less Install And Disassembly - This L-Shape Handle Is Locked By A 1/4"-20 Thumbscrew With D-Ring On The Bottom, Brings Tool-Less Disassembly And Installation..
Features
- For Nikon Z f - SmallRig Z f grip 4262 is specifically designed for for Nikon Z f camera to offering enhanced grip, it matches perfectly for Nikon Z f, brings the same texture and color with the camera.
- Tool-less Install and Disassembly - This L-shape handle is locked by a 1/4-20 thumbscrew with D-ring on the bottom, brings tool-less disassembly and installation.
- Compact and Lightweight - This grip plate features an ultra-thin design to realize a net weight of only 102g, making this item more compact and lightweight.
- Ergonomic Silicone Grip - This handgrip 4262 comes with an silicone handle, which has been ergonomically designed to ensure a comfortable and secure grip on the camera,
- Integrated Quick Release Plate for Arca - Integrated QR plate for Arca allows for fast switching between handheld, tripod, or gimbal for DJI RS mini. Three 1/4-20 threaded holes in the bottom also support tripods (eg. Tabletop Tripod BUT2664) and QR plates for Manfrotto, and wrist holes for wrist strap 3848 / 3926.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 2.76 x 5.91 x 2.20 inches | Weight: 0.22 Pounds
See On Amazon #9
SMALLRIG Quick Release Plate Drop-in HawkLock Mini Quick Release Camera Mount Adapter with 1/4" Screw, for Camera Clamp, Super Clamp, Ball Head, Tripod, Magic Arm, Stabilizer, Field Monitor - 3513C
Asin: B09MHY8HVS | Model: 3513-SR | PartNumber: 3513-SR
Safer & Faster: Smallrig Quick Release Plate Features Dual Locking Structure Inside The Baseplate, Provides High Load Capacity Of 5 Kg. The Quick Release Top Plate Can Buckle Vertically And Stably Into The Baseplate, Causing Not Deflection. Vertical Installation Is Faster And Solid Than Traditional Slide-In Installation.
Patented Hawklock Qr Ecosystem: To Improve Your Usage Experience, We've Released A Convenient Hawklock Ecosystem Of Well-Designed And High-Quality Quick Release Accessories, Such As Qr Plate Kit 3513, Cold Shoe Monitor Mount 3514, Magic Arm 3515, Nato Monitor Mount 3601, Qr Top Plate 3730, Qr Baseplate 3731, Ball Head 3600.
Durable & Reliable: The Quick Release Camera Mount Made Of Aluminum Alloy, Only 37G, Mini Size And Super Lightweight, Sturdy And Durable For A Long Use. Maximum Dynamic Load Capacity Of 5 Kg, Supports Most Devices In The Market. With Built-In Rubber Pads, Protect Against Deflection And Scratches.
Top Plate & Base Plate: The Mini Quick Release Plate Kit Comprises A Quick Release Top Plate And A Baseplate. Quickly Locked And Unlocked Through A Click Without Jamming. Allows You To Release And Lock Cameras, Smartphones, Monitors, And Lights In A Second Instead Of Screwing, Greatly Save Your Time.
Features
- Wide Compatibility: The quick release plate features a 1/4"-20 screw supports devices such as camera, monitor, cage, light, etc. And the quick release plate is reserved for 2 optional dowel pins, which can be removed and installed as needed to effectively prevent the devices from deflection. It also has a 1/4"-20 threaded hole on the bottom to allow attaching devices with 1/4"-20 screw (NOT over 6mm), like super clamp, tabletop tripod, ballhead, etc
- Top Plate & Base Plate: The mini quick release plate kit comprises a quick release top plate and a baseplate. Quickly locked and unlocked through a click without jamming. Allows you to release and lock cameras, smartphones, monitors, and lights in a second instead of screwing, greatly save your time
- Safer & Faster: SmallRig quick release plate features dual locking structure inside the baseplate, provides high load capacity of 5 kg. The quick release top plate can buckle vertically and stably into the baseplate, causing not deflection. Vertical installation is faster and solid than traditional slide-in installation
- Durable & Reliable: The quick release camera mount made of Aluminum alloy, only 37g, mini size and super lightweight, sturdy and durable for a long use. Maximum dynamic load capacity of 5 kg, supports most devices in the market. With built-in rubber pads, protect against deflection and scratches
- Patented HawkLock QR Ecosystem: To improve your usage experience, we've released a convenient HawkLock ecosystem of well-designed and high-quality quick release accessories, such as QR Plate kit 3513, Cold Shoe Monitor Mount 3514, Magic Arm 3515, NATO Monitor Mount 3601, QR Top Plate 3730, QR Baseplate 3731, Ball Head 3600
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 1.00 x 1.18 x 1.09 inches | Weight: 0.08 pounds
Warranty: 2-Year Warranty (1-Year for Electronic Products)
See On Amazon #10
SmallRig Full Camera Cage for Sony Alpha 7R V/Alpha 7 IV / A7R IV/Alpha 7 S III/Alpha 1-3667B
Asin: B09P7XQ32T | Model: 3667-SR | PartNumber: 3667-SR
Multiple Mounting Points: The Cage Has Multiple 1/4"-20 Holes And 3/8"-16 Positioning Holes For Arri, Which Can Attach Accessories Such As The Upper Handle 3765, The Side Handle 2093, And The Monitor Stand 2903B. There Are 2 Built-In Cold Shoe Interfaces, Which Can Install Microphones, Fill Lights And Other Equipment; The Qd Hole At The Bottom Is Compatible With Qd Shoulder Straps. Holes Are Reserved On Both Sides And Bottom Of The Cage To Attach Wrist Strap Pac2456 And Shoulder Strap Psc2428..
Power Backup Solution: Smallrig Np-Fz100 Camera Battery Charger Set Is Available Now, Two 2040Mah(Real) Rechargeable Batteries And A Charger Brings Long Battery Life For Your Videos And Photos Shooting, If You Need A Sufficient Power Supply, Please Search Smallrig Np-Fz100 Battery 3824(Asin:B09z6trbh8)..
All-Round Protection: Built-In All-Round Rubber Gasket To Prevent Scratches. With The Cage Installed, The Camera Interface, Dials, Buttons And Changing Batteries Are Not Affected. The Opening And Closing Wrench Design Is Added To The Position Of The Battery Compartment, Which Fits The Curve Of The Fuselage More, Solves The Problem Of Placing The Little Finger, And Enhances The Grip Of The Fuselage..
Built-In Quick Release Plate: The Bottom Quick Release Plate For Arca Has Added 1/4"-20 Holes With A Spacing Of 18Mm, Which Is Compatible For Dji Rs 2 / Rsc 2 / Rs 3 / Rs 3 Pro, And Can Also Be Adapted To Dji Rs 2 / Rsc 2 Stabilizer Mounting Board (Riser Plate) And Smallrig Quick Release Plate For Arca 3154..
Three-Point Locking: A Positioning Pin Is Added At The Bottom Of The Cage, And The 1/4"-20 Screw And The Left M2.5 Screw Form A Three-Point Locking To Make The Camera Stable. Adjust The Direction Of The Left Locking Slider To Adapt To Different Models, [A7 Iv] Side Is Suitable For Alpha 7 Iv And Alpha 7R V, [A7s Iii/A1] Side Is Suitable For Alpha 7S Iii / Alpha 1 / Alpha 7R Iv.
For Sony A7r V/A7 Iv/A7s Iii/A1/A7r Iv: Smallrig Cage 3667 Is Designed For Sony A7r V, A7 Iv, A7s Iii, A1, A7r Iv To Facilitate Low-Angle Shots And Protect The Camera While Offering A Wide Range Of Accessory Mounts. Note: The Cable Clamp For Hdmi 3000 Is Not Compatible With Alpha 1 And Alpha 7R Iv Because It Will Block The Synchro Terminal Interface When Used On The Alpha 7R V..
Features
- Improved Design: 1. A cold shoe is added to the upper right corner of the cage to facilitate the installation of accessories such as Microphone 3468 and LED Video light 3286; 2. Two 1/4"-20 threaded holes with a spacing of 18mm are added at the bottom, which is compatible with SmallRig Quick Release Plate for Arca 3154. A QD hole is added at the bottom, which is compatible with QD quick release shoulder straps and other accessories.
- For Sony A7R V/A7 IV/A7S III/A1/A7R IV: SmallRig Cage 3667 is designed for Sony A7R V, A7 IV, A7S III, A1, A7R IV to facilitate low-angle shots and protect the camera while offering a wide range of accessory mounts. NOTE: The Cable Clamp for HDMI 3000 is not compatible with Alpha 1 and Alpha 7R IV because it will block the synchro terminal interface when used on the Alpha 7R V.
- Multiple Mounting Points: The cage has multiple 1/4-20 holes and 3/8-16 positioning holes for ARRI, which can attach accessories such as the upper handle 3765, the side handle 2093, and the monitor stand 2903B. There are 2 built-in cold shoe interfaces, which can install microphones, fill lights and other equipment; the QD hole at the bottom is compatible with QD shoulder straps. Holes are reserved on both sides and bottom of the cage to attach Wrist Strap PAC2456 and Shoulder Strap PSC2428.
- Three-Point Locking: A positioning pin is added at the bottom of the cage, and the 1/4-20 screw and the left M2.5 screw form a three-point locking to make the camera stable. Adjust the direction of the left locking slider to adapt to different models, [A7 IV] side is suitable for Alpha 7 IV and Alpha 7R V, [A7S III/A1] side is suitable for Alpha 7S III / Alpha 1 / Alpha 7R IV
- All-Round Protection: Built-in all-round rubber gasket to prevent scratches. With the cage installed, the camera interface, dials, buttons and changing batteries are not affected. The opening and closing wrench design is added to the position of the battery compartment, which fits the curve of the fuselage more, solves the problem of placing the little finger, and enhances the grip of the fuselage.
- Built-in Quick Release Plate: The bottom quick release plate for Arca has added 1/4-20 holes with a spacing of 18mm, which is compatible for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro, and can also be adapted to DJI RS 2 / RSC 2 stabilizer mounting board (riser plate) and SmallRig Quick Release Plate for Arca 3154.
- Power Backup Solution: SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FZ100 Battery 3824(Asin:B09Z6TRBH8).
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 4.24 x 5.75 x 2.54 inches | Weight: 0.40 pounds
See On Amazon #11
SMALLRIG Standard 15mm Micro Rod 1.5 Inches Long with 1/4" Male Female Thread for Clamp Mount - 915
Asin: B0084MTJ0I | Model: 4332013904 | PartNumber: 4332013904 | Ean: 6907848000053
【Standard Short 15Mm Rod】A 15 Mm Micro Rod With A 1.5" Total Length (38 Mm) Comes With 1/4"-20 Male Thread On Top, And 1/4"-20 Female Thread At The Bottom For Attachment Of Other Products..
【Specifications】Package Included: 1 X 15Mm Rod Adapter; Material: Aluminum. Product Dimensions: 50 X 10 X 10Mm; Net Weight: 30G..
【High-Quality Material】The Rod Is Made Of High-Quality Aluminum Alloy And Stainless Steel, Light But Stable When Used..
【Standard 14"-20 Screw】1/4"-20 Male Mount With Locking Wheel Can Tightly Secure Items Such As External Monitors, Microphones, Lighting, And Many Other Accessories..
Features
- Highly Customized Rod This 1.5" rod can serve as a 15 mm quick release mount for adapting anything that requires a male or female 1/4" 20 connection. It is often used in conjunction with a clamp Mount (not included) or Cheese Plate (not included).
- Standard 14-20 Screw 1/4-20 male mount with locking wheel can tightly secure items such as external monitors, microphones, lighting, and many other accessories.
- Standard Short 15mm Rod A 15 mm micro rod with a 1.5 total length (38 mm) comes with 1/4-20 male thread on top, and 1/4-20 female thread at the bottom for attachment of other products.
- High-Quality Material The rod is made of high-quality aluminum alloy and stainless steel, light but stable when used.
- Specifications Package included: 1 x 15mm rod adapter; Material: Aluminum. Product Dimensions: 50 x 10 x 10mm; Net Weight: 30g.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 0.39 x 1.97 x 0.39 inches | Weight: 0.07 pounds
See On Amazon #12
SMALLRIG Adjustable Camera Monitor Mount with Quick Release NATO Clamp, Cold Shoe Mount, Anti-Twist Design for DJI RS 4 / RS 4 Pro/RS 2 / RSC 2 / RS 3 / RS 3 Pro/RS 3 Mini - 3026B
Asin: B08NPJDGRK | Model: 3026 | PartNumber: 3026 | Ean: 6941590003115
【Anti-Twist Design】New Version Monitor Mount 3026B Build In Locating Pins On The Top To Further Secure The Monitor, And A Silicone Pad To Prevent The Monitor From Scratching And Twisting. ( Please Note: The Max Payload Is 1.5Kg. ).
【Firm Locking】The Monitor Mount Can Be Installed On Two Sides Of The Stabilizer By A Quick-Release Nato Clamp And Features An Anti-Removal Stud To Protect Your Devices From Falling..
【Multiple Mounting Options】There Are Two 1/4"-20 Threaded Holes On Top Of The Monitor Mount Which Can Be Attached With Magic Arm 3238/3873 For Action Camera Or Other Rigs. On Top And Bottom Of It, There Is One Cold Shoe Mount That Can Be Attached To A Sound Receiver, Microphone, Led Light, Etc..
【170° Tilt Adjustment】Monitor Mount 3026B Can Tilt 170 Degrees. Different From The Old Version Using Allen Wrench, The Tilt Tension Of This Upgraded Monitor Mount Is Quickly Adjusted Via A Thumbscrew. With Its Compact Structure And Consistent Design Fits For Dji Rs 4 / Rs 4 Pro / Rs 2 / Rsc 2 / Rs 3 / Rs 3 Pro/Rs 3 Mini, It Is A Perfect Match With The Stabilizer..
Features
- FOR DJI RS 4 / RS 4 Pro / RS 2 / RSC 2 / RS 3 / RS 3 Pro/RS 3 Mini SmallRig Monitor Mount 3026B is specially designed for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro/ RS 3 mini gimbal. This mount is designed for adding accessories on both sides of the stabilizer, such as a camera monitor, LED light, sound receiver, wireless device, action camera, etc.
- 170 Tilt Adjustment Monitor Mount 3026B can tilt 170 degrees. Different from the old version using Allen Wrench, the tilt tension of this upgraded monitor mount is quickly adjusted via a thumbscrew. With its compact structure and consistent design fits for DJI RS 4 / RS 4 Pro / RS 2 / RSC 2 / RS 3 / RS 3 Pro/RS 3 Mini, it is a perfect match with the stabilizer.
- Anti-Twist Design New Version monitor mount 3026B build in locating pins on the top to further secure the monitor, and a silicone pad to prevent the monitor from scratching and twisting. ( Please note: the max payload is 1.5kg. )
- Multiple Mounting Options There are two 1/4-20 threaded holes on top of the monitor mount which can be attached with Magic Arm 3238/3873 for action camera or other rigs. On top and bottom of it, there is one cold shoe mount that can be attached to a sound receiver, microphone, LED light, etc.
- Firm Locking The monitor mount can be installed on two sides of the stabilizer by a quick-release NATO clamp and features an anti-removal stud to protect your devices from falling.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 2.07 x 5.28 x 1.65 inches | Weight: 0.25 pounds
See On Amazon #13
SmallRig Base Plate for Sony A7C II/A7CR, Bottom Mount Plate (Silver) with Built-in Quick-Release Plate for Arca, QD Socket, Strap Slot, 1/4"-20 and 3/8"-16 Threaded Hole - 4439
Asin: B0CJX8NYP7
Multiple Expansion Interfaces: The Qd Hole At The Bottom Is Compatible With Qd Shoulder Strap, And The Wrist Strap Hole Is Compatible With Smallrig Wrist Strap 3848. In Addition, There Are Built-In 1/4"-20 And 3/8"-16 Threaded Holes To Meet Your More Expansion Needs..
Anti-Scratch: The Base Plate Is Connected To The Bottom Of The Camera Through 1/4”-20 Screws. The Built-In Protective Gasket And Edge Protrusions Can Prevent The Camera From Being Scratched And Deflected. A Built-In Magnetic Wrench At The Bottom Makes It Easy To Disassemble And Assemble, And Can Be Used Anytime..
Note: This Product Cannot Be Used With The Smallrig Horizontal-To-Vertical Mount Plate For Sony Alpha 7C Ii / Alpha 7Cr - 4424.
Hinge Arm Design: The Hinge Arm Is Designed Next To The Battery Compartment, Which Enables You To Replace The Battery Smoothly Without Blocking The Battery Door, Enhance The Grip Of The Fuselage And Fit The Curve Of The Fuselage Better, Giving Your Little Finger A Place To Rest..
Quick-Release Plate For Arca: The Quick-Release Plate For Arca On The Bottom Is Designed For Dji Rs 2/Rsc 2/Rs 3/Rs 3 Pro, Compatible With Rs 2/Rsc 2 Original Quick-Release Plate And Smallrig Quick-Release Plate For Arca 3154, Allowing Your Camera To Be Easily Used With A Stabilizer..
Features
- For Sony A7C II/A7CR: SmallRig Baseplate 4439 is designed for Sony Alpha 7C II/Alpha 7CR to improve the grip of the camera, quickly switch between tripod, stabilizer and handheld shooting, while protecting the bottom of the camera.
- Quick-Release Plate for Arca: The quick-release plate for Arca on the bottom is designed for DJI RS 2/RSC 2/RS 3/RS 3 Pro, compatible with RS 2/RSC 2 original quick-release plate and SmallRig Quick-Release Plate for Arca 3154, allowing your camera to be easily used with a stabilizer.
- Multiple Expansion Interfaces: The QD hole at the bottom is compatible with QD shoulder strap, and the wrist strap hole is compatible with SmallRig Wrist Strap 3848. In addition, there are built-in 1/4-20 and 3/8-16 threaded holes to meet your more expansion needs.
- Hinge Arm Design: The hinge arm is designed next to the battery compartment, which enables you to replace the battery smoothly without blocking the battery door, enhance the grip of the fuselage and fit the curve of the fuselage better, giving your little finger a place to rest.
- Anti-Scratch: The base plate is connected to the bottom of the camera through 1/4 -20 screws. The built-in protective gasket and edge protrusions can prevent the camera from being scratched and deflected. A built-in magnetic wrench at the bottom makes it easy to disassemble and assemble, and can be used anytime.
- Note: This product cannot be used with the SmallRig Horizontal-to-Vertical Mount Plate for Sony Alpha 7C II / Alpha 7CR - 4424
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 0.45 x 4.92 x 2.27 inches | Weight: 0.14 pounds
Warranty: 2-Year Warranty (1-Year for Electronic Products)
See On Amazon #14
SmallRig Cage Kit for Sony A6700 with a Cable Clamp for HDMI, Built-in Quick Release Plate for Arca-Type, Film Movie Making Camera Video Cage with Shoe Mount, 1/4''-20 & 3/8''-16 Threaded Holes - 4336
Asin: B0CF54GL7B | Model: 4336-CF | PartNumber: 4336-CF
Full Protection: The All-In-One Complete Housing Fits The Sony A6700 Very Well, Locks The Camera By 1/4"-20 Screw And M2.5 Screw, Which Maintains Full Access To Your Ports, Controls And Battery Door And Provides Protection For Your Portable Camera Platform. Note: Remove The Strap Ring On The Right Side Of The Camera Before Installing The Cage. Refer To The User Manual For Installation..
With Hdmi Cable Clamp: The Sony A6700 Cage Kit Includes Cable Clamp That Protects Ports For Stable Transmission And Allows Quick Assembly And Disassembly With A Thumb-Scream: If You Need To Use The Headphone Jack From The Carera, You Must Remove The Hdmi Clamp Cable First..
Integrated Arca-Switzerland Plate: The Built-In Quick Release Plate For Arca-Swiss Makes It Easy To Quickly Switch Between Tripods, Stabilizers Or Handheld Devices For Dji Rs 2 / Rsc 2 / Rs 3 / Rs 3 Pro Shooting Modes..
Multiple Mounting Points: Comes With 1/4''-20 And 3/8''-16 Threaded Holes For Connecting Accessories Such As A 2916 Side Handle, Magic Arm With 2070 Ball Head And A 3/8"-16 Top Location Hole For 2165/3765 Top Handle And Cold Shoe That Supports Microphones And Led Lights The Cage Also Fits The Strap 3848 Hand Strap, Psw2398 Wrist Strap And Psc2428 Shoulder Strap..
Excellent Grip Feeling: Featured With An Additional Hinge Arm On The Battery Door, This Product Not Only Fits The Curve Of The Camera Perfectly, But Also Significantly Improves The Overall Grip Feel.The Ergonomic Design Provides A Comfortable And Secure Grip Of The Camera..
Features
- For Sony A6700: SmallRig Cage 4336 is designed for Sony A6700, which includes a cable clamp for HDMI, protects the camera while making it easy to record videos with its multiple accessory mounting points, which also allows you to focus on capturing stunning images.
- Excellent Grip Feeling: Featured with an additional hinge arm on the battery door, this product not only fits the curve of the camera perfectly, but also significantly improves the overall grip feel.The ergonomic design provides a comfortable and secure grip of the camera.
- Full Protection: The all-in-one complete housing fits the Sony A6700 very well, locks the camera by 1/4-20 screw and M2.5 screw, which maintains full access to your ports, controls and battery door and provides protection for your portable camera platform. Note: Remove the strap ring on the right side of the camera before installing the cage. Refer to the user manual for installation.
- Multiple Mounting Points: Comes with 1/4''-20 and 3/8''-16 threaded holes for connecting accessories such as a 2916 side handle, magic arm with 2070 ball head and a 3/8-16 top location hole for 2165/3765 top handle and cold shoe that supports microphones and LED lights The cage also Fits the strap 3848 hand strap, PSW2398 wrist strap and PSC2428 shoulder strap.
- With HDMI Cable Clamp: The Sony A6700 Cage Kit includes cable clamp that protects ports for stable transmission and allows quick assembly and disassembly with a thumb-scream: If you need to use the headphone jack from the carera, you must remove the HDMI clamp cable first.
- Integrated Arca-Switzerland Plate: The built-in quick release plate for Arca-Swiss makes it easy to quickly switch between tripods, stabilizers or handheld devices for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro shooting modes.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 2.45 x 5.49 x 3.58 inches | Weight: 0.34 Pounds
See On Amazon #15
SMALLRIG Camera Quick Release Plate Adapter for Arca-Swiss for DJI RS 4 / RS 4 Pro/RS 2 / RSC 2 / RS 3 / RS 3 Pro & for Ronin-S Gimbal - 3061
Asin: B08NPRYDJZ | Model: 3061-SR | PartNumber: 3061-SR
【Anti-Drop Design】It Has An Adjustable Anti-Drop Design, Which Can Still Achieve The Anti-Drop Function When Matched With The Original Plate For Arca. It Can Also Be Pressed To Adapt To The L Bracket For Arca-Swiss And Cage On The Market..
【Matte Surface】The Matte Surface Process To Avoid Reflections, Perfectly Matching The Gimbal Body. Besides, It Weighs Only 90G And Easy To Storage..
【Wide Compatibility】The Quick-Release Plate Adopts The Original Camera Plate Design, And Is Compatible With Arca-Swiss Plate, Focus Rod Mount Equipped With Rs 2/Rsc 2/Ronin-S / Rs 3 / Rs 3 Pro / Rs 4 / Rs 4 Pro, And Has A Gear Rack At The Bottom, Allowing The Quick-Release Plate For A Slight Adjustment..
【Fast Locking Without Tools】The Quick-Release Plate For Manfrotto With A Built-In Base For Arca-Swiss, Can Be Locked Quickly By Thumbscrew Without Any Tools..
Features
- FOR DJI Gimbal SmallRig QR Plate for Arca-Swiss 3061 is designed for DJI RS 4 / RS 4 Pro / RS 2/RSC 2/RS 3/RS 3 Pro & for Ronin-S gimbal. This plate is used to assist users to directly install an A L bracket for Arca and cage on the gimbal, which can switch quickly between tripods and gimbal, thereby saving users time.
- FAST LOCKING WITHOUT TOOLS The quick-release plate for Manfrotto with a built-in base for Arca-Swiss, can be locked quickly by thumbscrew without any tools.
- ANTI-DROP DESIGN It has an adjustable anti-drop design, which can still achieve the anti-drop function when matched with the original plate for Arca. It can also be pressed to adapt to the L bracket for Arca-Swiss and cage on the market.
- WIDE COMPATIBILITY The quick-release plate adopts the original camera plate design, and is compatible with Arca-Swiss plate, focus rod mount equipped with RS 2/RSC 2/Ronin-S / RS 3 / RS 3 Pro / RS 4 / RS 4 Pro, and has a gear rack at the bottom, allowing the quick-release plate for a slight adjustment.
- MATTE SURFACE The matte surface process to avoid reflections, perfectly matching the gimbal body. Besides, it weighs only 90g and easy to storage.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 0.63 x 5.51 x 1.97 inches | Weight: 0.20 pounds
See On Amazon #16
SmallRig Mini Ball Head, Tripod Head Camera 360 Panoramic with 1/4" Screw 3/8" Thread Mount and Quick Release Plate Metal Ball Joint for Monopod, DSLR, Phone, Gopro, Max Load 4.4lbs/2kg - BUT2665
Asin: B0833XVLK8 | Model: BUT2665-AU | PartNumber: BUT2665-AU
【Precision Panning Base】The Base Of Smallrig Ball Head Is Finely Laser-Engraved In 5° Increments From ±0°-330° For Tracking Progressive Panning, Ideal For Multi-Shot Panoramic Photography.
【High Stability】: Low-Profile Ball Head Design Creates A Stronger Locking Force And Higher Stability. Screw Knob Is Located On The Side Of The Ball Instead Of The Bottom Of The Ball Head Bring 15% Down The Whole Center Of The Gravity Of The Ball Head, Enhance Stability.
【Aluminum Alloy Material】: Made Of Aluminum Alloy, The Max Load Is 4.4Lbs/2 Kg, Very Strong And Durable. With Rubber-Padded Mount On The Top To Protect Your Camera From Potential Scratches.
【360 Degree Swivel Tripod Head】 Ensure 360° Panoramic Rotation For Panoramic Shooting, -90°/+45° Front Tilt And -50°/+50° Lateral Tilt For Multi-Angle Adjustment Including Horizontal Shooting And Vertical Shooting..
Features
- UNIVERSAL COMPATIBILITY SmallRig mini ball head features 1/4 " thread QR plate screw, 1/4 to 3/8 Screw Adapter and a 3/8 " bottom screw thread which is suitable for most DSLR cameras, camcorders, tripods, sliders, monopods.
- 360 Degree Swivel Tripod Head Ensure 360 panoramic rotation for panoramic shooting, -90 /+45 front tilt and -50 /+50 lateral tilt for multi-angle adjustment including horizontal shooting and vertical shooting.
- PRECISION PANNING BASE The base of SmallRig ball head is finely laser-engraved in 5 increments from 0 -330 for tracking progressive panning, ideal for multi-shot panoramic photography
- ALUMINUM ALLOY MATERIAL : Made of aluminum alloy, the Max load is 4.4lbs/2 kg, Very strong and durable. With rubber-padded mount on the top to protect your camera from potential scratches
- HIGH STABILITY : Low-profile ball head design creates a stronger locking force and higher stability. Screw knob is located on the side of the ball instead of the bottom of the ball head bring 15% down the whole center of the gravity of the Ball Head, enhance stability
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 2.36 x 3.15 x 2.56 inches | Weight: 0.41 pounds
See On Amazon #17
SmallRig Camera Cable Clamp (4 pcs) for HDMI/SDI/Microphone Cable, DSLR Camera Cable Lock Mount Support 2-7mm Cable - 3685
Asin: B09X9JW652
[Anti-Release Structure] The Universal Camera Wire Clamp Is Made Of Highly Elastic Silicone To Tightly Clamp The Cables, Prevent Falling Off Or Slip, Very Safe And Reliable.
[Compact And Lightweight] Only Weight 6G, Very Small To Use Multiple Cable Clamps, And Easy To Carry, Convenient Storage In The Pocket.
[Easy Unlocking] Snap On Connection, Quick And Easy To Open The Cover To Clip The Cable, Just One Step To Lock/Unlock. Keep The Cable Clamp Away From Strong Acid And Alkali.
[Wide Application] This Camera Cables Lock Mount Is Compatible With 2-7Mm Diameter Cables, One Or More Cables Can Be Tightly Wrapped, Such As Cable For Hdmi , Audio Cable, Power Cable, Sdi Cable, Microphone Cable, Follow Focus Cable, Etc.
Features
- [Camera Cables Regularize] The camera cable clamp is design to fix disordered cable, facilitates shooting and aviod cable obstruction, it attaches to camera cage, handle, L plate, monitor cage and other accessories through 1/4''-20 screw
- [Wide Application] This camera cables lock mount is compatible with 2-7mm diameter cables, one or more cables can be tightly wrapped, such as cable for HDMI , audio cable, power cable, SDI cable, microphone Cable, follow focus cable, etc
- [Anti-Release Structure] The universal camera wire clamp is made of highly elastic silicone to tightly clamp the cables, prevent falling off or slip, very safe and reliable
- [Easy Unlocking] Snap on connection, quick and easy to open the cover to clip the cable, just one step to lock/unlock. Keep the cable clamp away from strong acid and alkali
- [Compact and Lightweight] Only weight 6g, very small to use multiple cable clamps, and easy to carry, convenient storage in the pocket
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 0.63 x 0.94 x 0.91 inches | Weight: 0.01 pounds
See On Amazon #18
SmallRig A7 III / A7R III Camera Cage Kit for Sony Alpha 7 III/Alpha 7R III, Full Cage with Top Handle for ARRI and Cable Clamp, Built-in Cold Shoe and NATO Rails - 4198
Asin: B07BN1BSFT | Model: 4336305219 | PartNumber: 4336305219 | Ean: 6941590002262, 0704529975220 | UPC: 704529975220
【Top Handle For Arri】The Top Handle With 3/8"-16 Locating Holes For Arri Connects To The Cage. The Ergonomic Design Enhances The Experience Of Grip For The Fuselage. The Top Handle Makes The Cage Kit Easier To Carry And Facilitates Low-Angle Shooting..
【Safe Installation】The Cage Adopts Three-Point Locking, Which Is Stable And Does Not Deflect. It Comes With A Built-In Magnetic Flat-Head Screwdriver & Hex Spanner For Easy Disassembly And Assembly. Note: Please Remove The Side Lock Adapters Before Installing This Cage..
【Clamp For Hdmi Cable】The Hdmi Cable Clamp Mounted Onto The Left Side Of The Cage Via Two 1/4"-20 Screws, Prevents Deflection And Fixes Cables With A Thumbscrew To Protect Interfaces And Ensure Stable Signal Transmission..
【Multiple Mounting Points】The Kit Has Several Built-In Cold Shoes Can Attach Microphone 3468, Led Video Light 3286B, And Monitor Mount 2905B; Multiple Built-In 1/4"-20 Threaded Holes Support The Remote Control Side Handle 3323; Built-In 3/8"-16 Locating Holes For Arri Fits Monitor Mount 2903B. It Also Comes With A Nato Rail On The Left For Side Handle 3260. In Addition, Strap Holes On Both Sides Are Compatible With Hand Strap Pac2456..
Features
- For Sony Alpha 7 III / Alpha 7R III SmallRig cage kit for Sony A7 III / A7R III 4198 is designed for handheld shooting and attaching other accessories. The cage locks the camera via one bottom 1/4"-20 screw and two side lock adapters, and the built-in rubber pads could protect your camera. Built-in quick-release plate for Arca at the bottom is convenient to switch between tripod and stabilizer shooting.
- Multiple Mounting Points The kit has several built-in cold shoes can attach microphone 3468, LED video light 3286B, and monitor mount 2905B; multiple built-in 1/4-20 threaded holes support the remote control side handle 3323; built-in 3/8-16 locating holes for ARRI fits monitor mount 2903B. It also comes with a NATO rail on the left for side handle 3260. In addition, strap holes on both sides are compatible with hand strap PAC2456.
- Top Handle for ARRI The top handle with 3/8-16 locating holes for ARRI connects to the cage. The ergonomic design enhances the experience of grip for the fuselage. The top handle makes the cage kit easier to carry and facilitates low-angle shooting.
- Clamp for HDMI Cable The HDMI cable clamp mounted onto the left side of the cage via two 1/4-20 screws, prevents deflection and fixes cables with a thumbscrew to protect interfaces and ensure stable signal transmission.
- Safe Installation The cage adopts three-point locking, which is stable and does not deflect. It comes with a built-in magnetic flat-head screwdriver & hex spanner for easy disassembly and assembly. Note: Please remove the side lock adapters before installing this cage.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 5.71 x 7.01 x 4.84 inches | Weight: 0.69 pounds
See On Amazon #19
SmallRig Camera Half Cage for Sony Alpha 7R V/Alpha 7 IV/Alpha 7S III/Alpha 1/Alpha 7R IV - 3639
Asin: B09P5BNKRW | Model: 3639-SR | PartNumber: 3639-SR
【Multiple Mounting Points】The Half Cage 3639 Built-In All-Around Protective Spacers Protect The Camera From Being Scratched. 1/4"-20 Threaded Holes, 3/8"-16 Locating Holes For Arri, And Cold Shoes Support Top Handle 2165, Side Handle 2093, Monitor Mount 2903, Microphones, Led Lights, Etc. Quick Release Plate For Arca At The Bottom Is Design For Dji Rs 2 / Rsc 2 / Rs 3 / Rs 3 Pro And The Quick Release Plate For Dji Rs 2 / Rsc 2 / Rs 3 / Rs 3 Pro Stabilizers For Stabilizer Shooting..
【Note】① Cable Clamp For Hdmi 3000 Is Not Compatible With Alpha 1 And Alpha 7R Iv Cameras And Will Interfere With The Synchroterminal Interface When Used On Alpha 7R V Camera. ②To Use The Side Lock, Please Remove The Split Ring On The Left Side Of The Camera First.
【Power Backup Solution】Smallrig Np-Fz100 Camera Battery Charger Set Is Available Now, Two 2040Mah(Real) Rechargeable Batteries And A Charger Brings Long Battery Life For Your Videos And Photos Shooting, If You Need A Sufficient Power Supply, Please Search Smallrig Np-Fz100 Battery 3824.
【Built-In Accessories】This Half Cage 3639 Stores A Flat-Head Screwdriver And Allen Wrench That Facilitates Disassembly And Assembly. The Cage Maintains Rubber Padding To Prevent Your Camera From Scratching And Scuffing..
【Stable And Anti-Twist】It Includes Two Locking Side Plates And One 1/4"-20 Screw At The Bottom To Lock The Camera And Prevent Deflection And Gives Access To Dials And Buttons While Retaining The Grip Experience Of A Bare Camera..
Features
- Compatibility SmallRig formfitting aluminum half cage 3639 is expecially designed for Alpha 7R V/Alpha 7 IV/Alpha 7S III/Alpha 1/Alpha 7R IV with lightweight protection of the camera.
- Stable And Anti-twist It includes two locking side plates and one 1/4-20 screw at the bottom to lock the camera and prevent deflection and gives access to dials and buttons while retaining the grip experience of a bare camera.
- Multiple Mounting Points The half cage 3639 built-in all-around protective spacers protect the camera from being scratched. 1/4-20 threaded holes, 3/8-16 locating holes for ARRI, and cold shoes support top handle 2165, side handle 2093, monitor mount 2903, microphones, LED lights, etc. Quick release plate for Arca at the bottom is design for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro and the quick release plate for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro stabilizers for stabilizer shooting.
- Built-In Accessories This half cage 3639 stores a flat-head screwdriver and allen wrench that facilitates disassembly and assembly. The cage maintains rubber padding to prevent your camera from scratching and scuffing.
- Note Cable Clamp for HDMI 3000 is not compatible with Alpha 1 and Alpha 7R IV cameras and will interfere with the synchroterminal interface when used on Alpha 7R V camera. To use the side lock, please remove the split ring on the left side of the camera first
- Power Backup Solution SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FZ100 Battery 3824
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 4.25 x 3.78 x 2.01 inches | Weight: 0.25 Pounds
See On Amazon #20
SmallRig M50 /M50 II /M5 Cage (Upgraded), Aluminum Alloy Video Film Movie Making Rig with Integrated Grip and NATO Rail for Canon M50 /M50 II /M5 2168C
Asin: B07FP3ZZS6 | Model: 2168-CF | PartNumber: 2168-CF | Ean: 0669591748847, 0726962943161 | UPC: 726962943161, 669591748847
Ergonomic & Durable: The Cage Is Equipped With Ergonomically Designed Grip, Compact And Practical. The Recessed Arc-Shaped Design Of The Index Finger Grip Makes The Grip More Comfortable. It Is Made Of Ultra-Tough And Lightweight Aluminum Alloy, Which Is Resistant To Oxidation And Scratches..
Quick Attach And Release: Built-In Plate For Arca On The Bottom Which Makes It Convenient To Directly Mount On Clamps For Arca. You Can Achieve Quick Attach And Release, Lets You Go From Tripod To Handheld Shooting In Seconds. The 1/4" And 3/8" Threaded Holes On The Bottom For Different Tripods Or Monopods..
All Buttons Unobstructed: Form-Fitting Design With Super Cnc Cutting Technology Will Not Block Wifi Transfer Button, Camera Hot Shoe, Camera Control Buttons, For Hdmi/Sdi Slot And Battery Compartment..
Versatile Mounting Points: Designed With Cold Shoe , 1/4" And 3/8" Threaded Holes To Attach More Accessories. Such As, Led Lights, Microphone And Monitor Etc. The Nato Rails And Locating Holes For Arri On Side For Handle Mounting Or Other Accessory..
Features
- CUSTOMIZATION & ANTI-SCRATCH: It provides formfitting protection for Canon M50/M50 II/M5 camera and mounts to the camera using a 1/4"-20 screw with rubber cushion on the base plate preventing wiggles or scratches.
- VERSATILE MOUNTING POINTS: Designed with cold shoe , 1/4 and 3/8 threaded holes to attach more accessories. Such as, LED lights, microphone and monitor etc. The NATO rails and Locating holes for ARRI on side for handle mounting or other accessory.
- ERGONOMIC & DURABLE: The cage is equipped with ergonomically designed grip, compact and practical. The recessed arc-shaped design of the index finger grip makes the grip more comfortable. It is made of ultra-tough and lightweight aluminum alloy, which is resistant to oxidation and scratches.
- All BUTTONS UNOBSTRUCTED: Form-fitting design with super CNC cutting technology will not block wifi transfer button, camera hot shoe, camera control buttons, for HDMI/sdi slot and battery compartment.
- QUICK ATTACH AND RELEASE: Built-in plate for Arca on the bottom which makes it convenient to directly mount on clamps for Arca. You can achieve quick attach and release, lets you go from tripod to handheld shooting in seconds. The 1/4 and 3/8 threaded holes on the bottom for different tripods or monopods.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 3.86 x 5.24 x 2.24 inches | Weight: 0.35 Pounds
See On Amazon
Looking For Something Else?
Search