uxcell 8pcs Round Die Stock Handle Wrench Set, M3 M4 M5 M6 M8 M10 M12 Metric Threading Dies & 25mm (1") Die Holder for Bolt Thread Repair
Asin: B091CQ9HN6 | Model: a20112400ux0528 | PartNumber: a20112400ux0528
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Features: The Die Holder Provides Good Wear Resistance For Long Service Life. With 4 Adjustable Screws, The Die Stock Can Securely Hold Round Dies And Is Easy To Operate. The Alloy Tool Steel Die Is Not Loose For Conical Locking Hole And Strong Locking, With Hardness, High Torque, Good Toughness And Wear-Resistance..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened.The Die Surface Is Lubricated With Grease To Prevent Rust..
Application: The Die Handle Wrench Set Can Help To Process, Correct, Clean Male Threads, Or Repair Damaged Bolts And Threads, Or Just Remove Bolts And Threaded Rod. Great For Re-Threading Existing Threads In Hard Materials Like Metal, Or Making New Threads In Soft Material Like Plastic..
Features
- Die & Wrench Set: Die Wrench: 25mm (1") die stock fits 17mm-25mm outside diameter die / M3-M12 thread die, with one adjustable screw. Metric round dies size included: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5, M12 x 1.75.
- Application: The die handle wrench set can help to process, correct, clean male threads, or repair damaged bolts and threads, or just remove bolts and threaded rod. Great for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic.
- Features: The die holder provides good wear resistance for long service life. With 4 adjustable screws, the die stock can securely hold round dies and is easy to operate. The alloy tool steel die is not loose for conical locking hole and strong locking, with hardness, high torque, good toughness and wear-resistance.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.The die surface is lubricated with grease to prevent rust.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 8pcs Round Die Stock
#1
uxcell 8-32 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel Screw Thread Cutting Die
Asin: B07SVCV111 | Model: a19050800ux0950 | PartNumber: a19050800ux0950
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: 8-32 UNC; outside diameter (OD): 20mm / 0.8"; Thickness: 5mm / 0.2"; accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell Die Stock Handle Wrench Holder for Metric M7-M9 / 12mm-25mmm OD Round Die
Asin: B07M8PSB1C | Model: a18110600ux0062 | PartNumber: a18110600ux0062
Features: Round Die Holder Is Featured With Adjustable Screws To Fix The Dies. The Die Stock Can Securely Hold Round Dies And Is Easy To Operate..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping Threads..
Easy To Use: The Positioning Groove Of The Die (Not Included) Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screws Should Be Inserted Into The Slot Of The Die And Tightened..
Applications: The Die Handle Wrench Can Help To Repair Damaged Bolts And Threads Or Just Remove Bolts And Threaded Rod When Used With Round Dies (Not Included)..
Features
- Die Stock: Fit capacity size: M7-M9 / 12mm-25mm. Die stock, also called die handle or die wrench, are use in round dies only. Made of tool steel and alloy steel, chrome plated. Provides high hardness, wear resistance, and heat resistance.
- Applications: The die handle wrench can help to repair damaged bolts and threads or just remove bolts and threaded rod when used with round dies (not included).
- Features: Round die holder is featured with adjustable screws to fix the dies. The die stock can securely hold round dies and is easy to operate.
- Easy to Use: The positioning groove of the die (not included) should be aligned with the fastening screw in the middle of the die wrench, and the screws should be inserted into the slot of the die and tightened.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 8.27 x 0.39 inches | Weight: 0.00 Pounds
See On Amazon #3
uxcell Round Die Stock Handle Wrench Set, 8-32 UNC Threading Die and 20mm Die Holder (Fits: 11mm-20mm OD Die / M3-M4 Thread Die) Adjustable for Bolt Thread Repair
Asin: B093FB8942 | Model: a20102800ux0084 | PartNumber: a20102800ux0084
Features: The Die Holder Provides Good Wear Resistance For Long Service Life. With 4 Adjustable Screws, The Die Stock Can Securely Hold Round Dies And Is Easy To Operate. The Alloy Tool Steel Die Is Not Loose For Conical Locking Hole And Strong Locking, With Hardness, High Torque, Good Toughness And Wear-Resistance..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened.The Die Surface Is Lubricated With Grease To Prevent Rust..
Application: The Die Handle Wrench Set Can Help To Process, Correct, Clean Male Threads, Or Repair Damaged Bolts And Threads, Or Just Remove Bolts And Threaded Rod. Great For Re-Threading Existing Threads In Hard Materials Like Metal, Or Making New Threads In Soft Material Like Plastic..
Features
- Die & Wrench Set: Die Wrench: 20mm x 5mm die stock fits 11mm-20mm outside diameter die / M3-M4 thread die, with 4 adjustable screws Round Die: #8-32 UNC threading die with 20mm outside diameter. Die stock, also called die handle or die wrench, are use in round dies only.
- Application: The die handle wrench set can help to process, correct, clean male threads, or repair damaged bolts and threads, or just remove bolts and threaded rod. Great for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic.
- Features: The die holder provides good wear resistance for long service life. With 4 adjustable screws, the die stock can securely hold round dies and is easy to operate. The alloy tool steel die is not loose for conical locking hole and strong locking, with hardness, high torque, good toughness and wear-resistance.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.The die surface is lubricated with grease to prevent rust.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell M8 x 1.0 Metric Round Die, Machine Thread Left Hand Threading Die, Alloy Steel Screw Thread Cutting Die
Asin: B07R9JS4ML | Model: a18122900ux0472 | PartNumber: a18122900ux0472
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: M8 x 1.0; outside diameter (OD): 25mm / 1.0"; Thickness: 7.3mm / 0.29"; fine grinding. Made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell 8-32 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel Screw Thread Cutting Die, 2pcs
Asin: B07SWJCH8X | Model: a19050800ux0951 | PartNumber: a19050800ux0951
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: 8-32 UNC; outside diameter (OD): 20mm / 0.8"; Thickness: 5mm / 0.2"; accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #6
uxcell Die Stock Handle Wrench Set, 8-32 UNC Round Die and 20mm Die Holder (Fits 1/8"-5/32" (UNC/UNF) / Metric M3-M4 / 20mm OD Dies) for Bolt Thread Repair
Asin: B0CQ1MMZ4N
Features: Zinc Alloy Steel Die Handle Offers High Hardness, Strength And Durability. Designed With 4 Adjustable Screws, The Die Stock Can Securely Hold Round Dies And Is Easy To Operate. 9Sicr Alloy Tool Steel Thread Die Has High Hardness, High Torque, Wear Resistance, And High Tempering Resistance. Conical Lock Hole, Strong Locking Force And No Loosening..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Apply Suitable Cutting Oil Or Lubricant To The Workpiece And Die To Get Smoother, Cleaner Threads. Apply Even And Consistent Pressure While Turning The Die Stock..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened.The Die Surface Is Lubricated With Grease To Prevent Rust..
Wide Applications: Can Accurately Cut, Repair Or Clean Male Threads On Rods, Bolts, Screws, Pipes And Shafts, Or Just Remove Bolts And Threaded Rods. Suitable For Re-Threading Existing Threads In Hard Materials Like Metal, Or Making New Threads In Soft Material Like Plastic..
Features
- Die Stock Wrench Set Size: Round Die: thread size: 8-32 UNC; outside diameter (OD): 20mm / 0.79"; thickness: 5mm / 0.2". Die Stock: fit die size: 1/8"-5/32" (unc/unf) / M3-M4 (metric) / 20mm OD die; die stock size: 20mm x 5mm / 0.79" x 0.2" (D*H). Die stock, also called die handle or die wrench, is use in round dies only.
- Wide Applications: Can accurately cut, repair or clean male threads on rods, bolts, screws, pipes and shafts, or just remove bolts and threaded rods. Suitable for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic.
- Features: Zinc alloy steel die handle offers high hardness, strength and durability. Designed with 4 adjustable screws, the die stock can securely hold round dies and is easy to operate. 9SiCr alloy tool steel thread die has high hardness, high torque, wear resistance, and high tempering resistance. Conical lock hole, strong locking force and no loosening.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.The die surface is lubricated with grease to prevent rust.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Apply suitable cutting oil or lubricant to the workpiece and die to get smoother, cleaner threads. Apply even and consistent pressure while turning the die stock.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell M3.5 x 0.6 Metric Round Die, Machine Thread Right Hand Threading Die, Alloy Steel Screw Thread Cutting Die
Asin: B07R46M2VP | Model: a18122900ux0432 | PartNumber: a18122900ux0432
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: M3.5 x 0.6 (right hand); outside diameter (OD): 20mm / 0.8"; Thickness: 5mm / 0.2"; fine grinding. Made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell M5 x 0.8 Metric Round Die, Machine Thread Right Hand Threading Die, Alloy Steel Screw Thread Cutting Die
Asin: B0CTMRWLCS
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: M5 x 0.8 (right hand); outside diameter (OD): 20mm / 0.79"; Thickness: 7mm / 0.28"; fine grinding. Made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell Die Stock Handle Wrench Holder for Metric M4.5-M6 / 8mm-20mm OD Round Die
Asin: B07M8F6TLL | Model: a18110600ux0061 | PartNumber: a18110600ux0061
Features: Round Die Holder Is Featured With Adjustable Screws To Fix The Dies. The Die Stock Can Securely Hold Round Dies And Is Easy To Operate..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping Threads..
Easy To Use: The Positioning Groove Of The Die (Not Included) Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screws Should Be Inserted Into The Slot Of The Die And Tightened..
Applications: The Die Handle Wrench Can Help To Repair Damaged Bolts And Threads Or Just Remove Bolts And Threaded Rod When Used With Round Dies (Not Included)..
Features
- Die Stock: Fit capacity size: M4.5-M6 / 8mm-20mm. Die stock, also called die handle or die wrench, are use in round dies only. Made of tool steel and alloy steel, chrome plated. Provides high hardness, wear resistance, and heat resistance.
- Applications: The die handle wrench can help to repair damaged bolts and threads or just remove bolts and threaded rod when used with round dies (not included).
- Features: Round die holder is featured with adjustable screws to fix the dies. The die stock can securely hold round dies and is easy to operate.
- Easy to Use: The positioning groove of the die (not included) should be aligned with the fastening screw in the middle of the die wrench, and the screws should be inserted into the slot of the die and tightened.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 6.30 x 0.79 inches
See On Amazon #10
uxcell 5/8-11 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel Screw Thread Cutting Die, 2pcs
Asin: B07SVDDL6V | Model: B07SVDDL6V | PartNumber: B07SVDDL6V
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: 5/8-11 UNC; outside diameter (OD): 38mm / 1.5"; Thickness: 14mm / 0.55"; accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell 1pcs Round Die Stock Handle Wrench Holder & 2pcs Round Die 1/4-28 UNF Machine Thread Right Hand
Asin: B0BNXN74DV | Model: f22062300ux1579 | PartNumber: f22062300ux1579
Features Of Die Stock: Die Stock, Also Called Die To Handle Is For Use In Round Dies Only. This Die Stock Is For Use With A 20Mm Outside Diameter Split Die. It Features Screws That Allow You To Compress The Die To Take Off More Material (If The Thread Is Too Tight) And Alternatively A Screw That Allows The Die To Spread Open, Which Allows You To Cut The Damaged Bar..
Package Content: 1 X Round Die Stock, 2Pcs X Round Die..
Features Of Round Die: Round Dies Are Perfect For Re-Threading Existing Threads In Hard Materials Like Metal Or Making New Threads In Softer Materials Such As Plastic. Solid Round Dies Are Suitable For General Purpose Threading. Great For Maintenance And Repair Work. Suitable For Maintenance And Repair Work In The Shop Or Field..
Size Of Round Die: Thread Size: 1/4-28 Unf; Outside Diameter: 20Mm / 0.8"; Thickness: 7Mm / 0.28"..
Features
- Size of Round Die Stock: Fit Die Size: 20*7mm / 0.79*0.275 inch(Dia*W); Fit Capacity Size: M4.5-M6 / 8mm-20mm; Overall Length: 172mm / 6.77 inch; Handle Length: 62mm / 2.44 inch; Handle Diameter: 6.8mm / 0.27 inch.
- Size of Round Die: Thread Size: 1/4-28 UNF; Outside Diameter: 20mm / 0.8; Thickness: 7mm / 0.28.
- Features of Die stock: Die stock, also called die to handle is for use in round dies only. This die stock is for use with a 20mm outside diameter split die. It features screws that allow you to compress the die to take off more material (if the thread is too tight) and alternatively a screw that allows the die to spread open, which allows you to cut the damaged bar.
- Features of Round Die: Round dies are perfect for re-threading existing threads in hard materials like metal or making new threads in softer materials such as plastic. Solid round dies are suitable for general purpose threading. Great for maintenance and repair work. Suitable for maintenance and repair work in the shop or field.
- Package Content: 1 X Round Die Stock, 2pcs x Round Die.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell Die Stock Handle Wrench Holder for Metric M7-M9 / 12mm-25mmm & M10-M11 / 20mm-30mm OD Round Die
Asin: B0BNXP6FVL | Model: f22062300ux1581 | PartNumber: f22062300ux1581
Features: Round Die Holder Is Featured With Adjustable Screws To Fix The Dies. The Die Stock Can Securely Hold Round Dies And Is Easy To Operate..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping Threads..
Easy To Use: The Positioning Groove Of The Die (Not Included) Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screws Should Be Inserted Into The Slot Of The Die And Tightened..
Applications: The Die Handle Wrench Can Help To Repair Damaged Bolts And Threads Or Just Remove Bolts And Threaded Rod When Used With Round Dies (Not Included)..
Features
- Die Stock: Fit capacity size: M7-M9 / 12mm-25m, M10-M11 / 20mm-30mm. Die stock, also called die handle or die wrench, are use in round dies only. Made of tool steel and alloy steel, chrome plated. Provides high hardness, wear resistance, and heat resistance.
- Applications: The die handle wrench can help to repair damaged bolts and threads or just remove bolts and threaded rod when used with round dies (not included).
- Features: Round die holder is featured with adjustable screws to fix the dies. The die stock can securely hold round dies and is easy to operate.
- Easy to Use: The positioning groove of the die (not included) should be aligned with the fastening screw in the middle of the die wrench, and the screws should be inserted into the slot of the die and tightened.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell Round Die Stock Handle Wrench Holder 20mm x 7mm M4-M6 Metric & Metric Round Die 1/4-20 UNC 0.8" OD Machine Thread Right Hand Threading Die
Asin: B0BNXPKYK5 | Model: f22062300ux2053 | PartNumber: f22062300ux2053
Features Of Round Die Stock: This Die Stock Is For Use With A 30Mm Outside Diameter Split Die. It Features Screws That Allow You To Compress The Die To Take Off More Material (If The Thread Is Too Tight) And Alternatively A Screw That Allows The Die To Spread Open, Which Allows You To Cut The Damaged Bar..
Package: 1Pcs X Round Die Stock, 1Pcs X Round Die..
Features Of Round Die: Round Dies Are Perfect For Re-Threading Existing Threads In Hard Materials Like Metal Or Making New Threads In Softer Materials Such As Plastic. Great For Maintenance And Repair Work In The Shop Or Field. Die Size Is Etched On The Surface For Easy Identification..
Size Of Round Die: Thread Size: 1/4-20 Unc; Outside Diameter: 20Mm / 0.8"; Thickness: 7Mm / 0.28".
Features
- Size of Round Die Stock: Fit Capacity Size: M4-M6 / 6mm-20mm; Fit Die Size: 20x7mm/0.79x0.28 inch (Dia x W); Overall Length: 174mm/6.85 inch; Handle Length: 62mm/2.44 inch; Handle Diameter: 7mm/0.28 inch.
- Size of Round Die: Thread Size: 1/4-20 UNC; Outside Diameter: 20mm / 0.8; Thickness: 7mm / 0.28
- Features of Round Die Stock: This die stock is for use with a 30mm outside diameter split die. It features screws that allow you to compress the die to take off more material (if the thread is too tight) and alternatively a screw that allows the die to spread open, which allows you to cut the damaged bar.
- Features of Round Die: Round Dies are perfect for re-threading existing threads in hard materials like metal or making new threads in softer materials such as plastic. Great for maintenance and repair work in the shop or field. Die size is etched on the surface for easy identification.
- Package: 1pcs x Round Die Stock, 1pcs x Round Die.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell 2pcs Round Threading Dies, Metric M12 x 1 Thread (Right Hand), Alloy Tool Steel Screw Cutting Die Repair Tool
Asin: B0CT2YSVBC
Features: Conical Locking Hole, Strong Locking Force, No Loosening. Suitable For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The End Of The Bar Stock Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread..
Easy To Use: Threading Die Is Used With Die Stock (Also Called Die Handle Or Die Wrench). The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Wrench, And The Screw Should Be Inserted Into The Groove Of The Die And Tightened. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole..
Wide Applications: Round Dies Can Process, Correct Or Clean The External Threads, And Is Used For Ordinary Thread Processing Of Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Threading Die: Thread size: M12 x 1 (right hand); outside diameter: 38mm / 1.5"; thickness: 10mm / 0.39"; accuracy class: 6g. Made of 9SiCr alloy tool steel, it has excellent hardness, high torque, good toughness and wear resistance, and long-lasting performance.
- Wide Applications: Round dies can process, correct or clean the external threads, and is used for ordinary thread processing of stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking force, no loosening. Suitable for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: Threading die is used with die stock (also called die handle or die wrench). The positioning groove of the die should be aligned with the fastening screw in the middle of the wrench, and the screw should be inserted into the groove of the die and tightened. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole.
- Tips: Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The end of the bar stock should be chamfered 1*45 degree, and the chamfer is too large to cut in. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
uxcell Die Stock Handle Wrench Set, M5 x 0.8 Threading Round Die and 20mm (Fit M3.5-M6 Dies) Holder Adjustable Wrench Hand Tool
Asin: B0B6R9L78K | Model: a22040300ux0327 | PartNumber: a22040300ux0327
Die Stock: Can Help To Repair Broken Bolts And Threads Or Just Remove Bolts And Threaded Rod When Used With Round Dies. With Adjustable Screws, It Can Securely Hold Round Dies And Is Easy To Operate. 45# Carbon Steel Tool Has High Hardness, High Strength And Resistance To Deformation Than Ordinary A3 Steel..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping Threads. Good For Maintenance And Repair Work..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. Necessary Tools For Hand Tapping Operation, Can Improve The Efficiency Of Processing Threads..
Round Die: Suitable For Re-Threading Existing Threads In Hard Materials Like Metal, Or Making New Threads In Soft Material Like Plastic. Used For Threading Mild Steel, Aluminum, Stainless Steel, Cast Iron, Alloy Steel And Carbon Steel. Fit For General Purpose Threading..
Features
- Die Stock Wrench Set: 20mm die stock fits M3.5-M6 dies, with adjustable screws. M5 x 0.8 threading round die with 20mm outside diameter, conical locking hole, strong locking and not loose. The round die has good abrasion resistance.
- Round Die: Suitable for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic. Used for threading mild steel, aluminum, stainless steel, cast iron, alloy steel and carbon steel. Fit for general purpose threading.
- Die Stock: Can help to repair broken bolts and threads or just remove bolts and threaded rod when used with round dies. With adjustable screws, it can securely hold round dies and is easy to operate. 45# carbon steel tool has high hardness, high strength and resistance to deformation than ordinary A3 steel.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. Necessary tools for hand tapping operation, can improve the efficiency of processing threads.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads. Good for maintenance and repair work.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell 25mm Round Die Stock Handle Wrench Holder,for Metric M7-M9 / 13mm-25mm Round Die, with Knurled Handle
Asin: B07RZQ24R7
Features: Round Die Holder Is Featured With 5 Adjustable Screws To Fix The Dies. The Die Stock Can Securely Hold Round Dies And Is Easy To Operate. The Frame Helps To Keep The Cutting Tools In Alignment. Can Ensure That The Threads Are Evenly Spaced And Are Cut To The Specifications Required..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping Threads..
Easy To Use: The Positioning Groove Of The Die (Not Included) Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screws Should Be Inserted Into The Slot Of The Die And Tightened..
Applications: The Die Handle Wrench Can Help To Repair Damaged Bolts And Threads Or Just Remove Bolts And Threaded Rod When Used With Round Dies (Not Included). Create Uniform Threads On Different Types Of Screws, Bolts, And Pipes..
Features
- Die Stock: Fit capacity size: M7-M9 / 13mm-25mm. Die stock, also called die handle or die wrench, are use in round dies only. Made of zinc alloy and carbon steel, with non-slip knurled handle
- Applications: The die handle wrench can help to repair damaged bolts and threads or just remove bolts and threaded rod when used with round dies (not included). Create uniform threads on different types of screws, bolts, and pipes.
- Features: Round die holder is featured with 5 adjustable screws to fix the dies. The die stock can securely hold round dies and is easy to operate. The frame helps to keep the cutting tools in alignment. Can ensure that the threads are evenly spaced and are cut to the specifications required.
- Easy to Use: The positioning groove of the die (not included) should be aligned with the fastening screw in the middle of the die wrench, and the screws should be inserted into the slot of the die and tightened.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell Round Threading Dies, Metric M8 x 1.25 Thread (Right Hand), Adjustable High Speed Steel (HSS) Screw Cutting Die Repair Tool
Asin: B0CTMS14YS
Features: Conical Locking Hole, Strong Locking Force, No Loosening. Suitable For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The End Of The Bar Stock Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread..
Easy To Use: Threading Die Is Used With Die Stock (Also Called Die Handle Or Die Wrench). The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Wrench, And The Screw Should Be Inserted Into The Groove Of The Die And Tightened. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole..
Wide Applications: Round Dies Can Process, Correct Or Clean The External Threads, And Is Used For Ordinary Thread Processing Of Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Threading Die: Thread size: M8 x 1.25 (right hand); outside diameter: 25mm / 0.98"; thickness: 9mm / 0.35"; accuracy class: 6g. Made of M2 (6542) high-speed steel, it has high hardness, good toughness, wear resistance, and excellent cutting performance.
- Wide Applications: Round dies can process, correct or clean the external threads, and is used for ordinary thread processing of stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking force, no loosening. Suitable for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: Threading die is used with die stock (also called die handle or die wrench). The positioning groove of the die should be aligned with the fastening screw in the middle of the wrench, and the screw should be inserted into the groove of the die and tightened. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole.
- Tips: Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The end of the bar stock should be chamfered 1*45 degree, and the chamfer is too large to cut in. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell Die Stock Handle Wrench Set, 5/8-11 UNC Round Die and 38mm Die Holder (Fits 1/2"-5/8" (UNC/UNF) / Metric M12-M14 / 38mm OD Dies) for Bolt Thread Repair
Asin: B0CQ1KG4WY
Features: Zinc Alloy Steel Die Handle Offers High Hardness, Strength And Durability. Designed With 5 Adjustable Screws, The Die Stock Can Securely Hold Round Dies And Is Easy To Operate. 9Sicr Alloy Tool Steel Thread Die Has High Hardness, High Torque, Wear Resistance, And High Tempering Resistance. Conical Lock Hole, Strong Locking Force And No Loosening..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Apply Suitable Cutting Oil Or Lubricant To The Workpiece And Die To Get Smoother, Cleaner Threads. Apply Even And Consistent Pressure While Turning The Die Stock..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened.The Die Surface Is Lubricated With Grease To Prevent Rust..
Wide Applications: Can Accurately Cut, Repair Or Clean Male Threads On Rods, Bolts, Screws, Pipes And Shafts, Or Just Remove Bolts And Threaded Rods. Suitable For Re-Threading Existing Threads In Hard Materials Like Metal, Or Making New Threads In Soft Material Like Plastic..
Features
- Die Stock Wrench Set Size: Round Die: thread size: 5/8-11 UNC; outside diameter (OD): 38mm / 1.5"; thickness: 14mm / 0.55". Die Stock: fit die size: 1/2"-5/8" (unc/unf) / M12-M14 (metric) / 38mm OD die; die stock size: 38mm x 14mm / 1.5" x 0.55" (D*H). Die stock, also called die handle or die wrench, is use in round dies only.
- Wide Applications: Can accurately cut, repair or clean male threads on rods, bolts, screws, pipes and shafts, or just remove bolts and threaded rods. Suitable for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic.
- Features: Zinc alloy steel die handle offers high hardness, strength and durability. Designed with 5 adjustable screws, the die stock can securely hold round dies and is easy to operate. 9SiCr alloy tool steel thread die has high hardness, high torque, wear resistance, and high tempering resistance. Conical lock hole, strong locking force and no loosening.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.The die surface is lubricated with grease to prevent rust.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Apply suitable cutting oil or lubricant to the workpiece and die to get smoother, cleaner threads. Apply even and consistent pressure while turning the die stock.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell Round Die Stock Handle Wrench Set, 9/16-12 UNC Threading Die and 38mm (1-1/2") Die Holder (Fits: 26mm-38mm OD Die / M12-M16 Thread Die) Adjustable for Bolt Thread Repair
Asin: B093FC2ZR7 | Model: a20102800ux0102 | PartNumber: a20102800ux0102
Features: The Die Holder Provides Good Wear Resistance For Long Service Life. With 4 Adjustable Screws, The Die Stock Can Securely Hold Round Dies And Is Easy To Operate. The Alloy Tool Steel Die Is Not Loose For Conical Locking Hole And Strong Locking, With Hardness, High Torque, Good Toughness And Wear-Resistance..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened.The Die Surface Is Lubricated With Grease To Prevent Rust..
Application: The Die Handle Wrench Set Can Help To Process, Correct, Clean Male Threads, Or Repair Damaged Bolts And Threads, Or Just Remove Bolts And Threaded Rod. Great For Re-Threading Existing Threads In Hard Materials Like Metal, Or Making New Threads In Soft Material Like Plastic..
Features
- Die & Wrench Set: Die Wrench: 38mm x 14mm die stock fits 26mm-38mm outside diameter die / M12-M16 thread die, with 5 adjustable screws Round Die: 9/16-12 UNC threading die with 38mm outside diameter. Die stock, also called die handle or die wrench, are use in round dies only.
- Application: The die handle wrench set can help to process, correct, clean male threads, or repair damaged bolts and threads, or just remove bolts and threaded rod. Great for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic.
- Features: The die holder provides good wear resistance for long service life. With 4 adjustable screws, the die stock can securely hold round dies and is easy to operate. The alloy tool steel die is not loose for conical locking hole and strong locking, with hardness, high torque, good toughness and wear-resistance.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.The die surface is lubricated with grease to prevent rust.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search