TOPPING DX3Pro+ LDAC NFCA Headphone Amplifier ES9038Q2M XMOS XU208 DAC Amp USB/Opt/Coax/Bluetooth DSD512 PCM768 Hi-Res Audio DAC DX3pro Plus with Remote Control (Black)
Asin: B09HBJ1WK6 | Model: TOPPING DX3 Pro+ | PartNumber: TOPPING DX3 Pro+
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Plug And Play, Turn Pc Into A Hifi Source】Dx3 Pro + Uses 2Nd Generation 8 Core Xmos Xu208, Usb Supports Up To Pcm32bit/768Khz And Dsd512 Native. It Also Compatible With A Variety Of Hifi Systems. And All Inputs Have Achieved Low Jitter, Let Listen To Music More Freely..
【Dac+Pre-Amplifier Application】Dx3pro+ Has A Simple Pre-Amp Function That You Can Use To Adjust The Volume. The Digital Volume Adjustment Will Not Has Any Imbalance Between The Left And Right Channels. Note: The Voltage Of The Power Adapter For Dx3pro+Is 15V..
The Voltage Of Dx3pro+ Supports 110-230V, Suitable For All Countries..
【Nfca Circuit And Decoding Amp Application】Dx3 Pro+ Has A Built-In Nfca Headphone Amplifier Module Tailored To It, Providing Low Noise And Distortion Far Superior To The Industry. Connect The Digital Signal And Earphone To Dx3 Pro+, It Can Be Used As A Decoder + Earphone, Bringing You Every Detail Of Music..
【High Performance Dac Circuit】Es9038q2m Through Meticulous Engineering Design And Attention To Details, Dx3 Pro+ Achieves 0.00015% Thd+N, Completely And High-Fidelity Restore The Sound Quality Of The Studio..
Features
- Bluetooth 5.0 & LDAC Transmission DX3 Pro+ is equipped with new QCC5125 Bluetooth chip and supports audio encoding such as LDAC/AAC/SBC/APTX/APTX LL/APTX HD. The audio is transmitted Wirelessly and decoded using ES9038Q2M for better sound quality.
- High Performance DAC Circuit ES9038Q2M through meticulous engineering design and attention to details, DX3 Pro+ achieves 0.00015% THD+N, completely and high-fidelity restore the sound quality of the studio.
- Plug And Play, Turn PC Into a HIFI Source Dx3 Pro + uses 2nd generation 8 core XMOS XU208, USB supports up to PCM32bit/768kHz and DSD512 native. It also compatible with a variety of HIFI systems. And all inputs have achieved low Jitter, let listen to music more freely.
- NFCA Circuit And Decoding Amp Application DX3 Pro+ has a built-in NFCA headphone amplifier module tailored to it, providing low noise and distortion far superior to the industry. Connect the digital signal and earphone to DX3 Pro+, it can be used as a decoder + earphone, bringing you every detail of music.
- DAC+Pre-amplifier application DX3Pro+ has a simple Pre-amp function that you can use to adjust the volume. The digital volume adjustment will not has any imbalance between the left and right channels. Note: The voltage of the power adapter for DX3pro+is 15V.
- The voltage of DX3pro+ supports 110-230V, suitable for all countries.
- See more on Amazon...
Brand: TOPPING | Manufacturer: TOPPING
Dimensions: 1.57 x 4.72 x 6.50 Inches | Weight: 1.10 pounds
See On Amazon Similar To TOPPING DX3Pro LDAC NFCA Headphone
#1
Topping DX3pro+ LDAC Headphone Amplifier - ES9038Q2M XU208 NFCA Bluetooth5.0 Audio Decoder USB/Opt/Coax DAC AMP Pre Amplifier with Remote Control (Black)
Asin: B09JC3TCJF | Model: TOPPING DX3pro+ | PartNumber: TOPPING DX3pro+
🎵 Bluetooth 5.0 - Connect The Bluetooth Of The Phone, Tablet Or Notebook To Dx3pro+, And Connect The Power Amplifier, Active Speakers Or Headphones To The Dx3pro+'S Output, Then Dx3pro+ Becomes Your Bluetooth Headphone Amp 1 Bluetooth Dac. You Can Easily Enjoy The High Quality Music And Convenience Brought By Bluetooth 5.0. If Your Device Supports Ldac Transmission, You Will Get Even Better Experience..
🎵 Dac+Pre-Amplifier Application - Topping Dx3pro+ Has A Simple Pre Amp Function That You Can Use To Adjust The Volume. The Digital Volume Ad- Justment Will Not Has Any Imbalance Between The Left And Right Channels..
🎵 High Performance Dac For Media Player - Whether It Is Apple Ios Device, Android Device And Media Player, As Long As It Supports Otg External Sound Card, It Can Be Connected To The Usb Input Of Dx3pro+ To Make Dx3pro+ Be Their External High Performance Dac..
🎵 About Topping Dx3 Pro+ - Equipped With The Latest Qcc5125 Chip, It Supports Ldac / Aac / Sbc / Aptx / Aptx Ll / Aptx Hd Protocols. It Uses The Es9038q2m Decoder, Supports High-Resolution Music Transmission, And Can Be Played Back With Clear Sound..
Features
- High-end audio - TOPPING DX3 Pro+ DAC is a high-performance DAC with USB, optical fiber, coaxial, Bluetooth input, Line Out, and headphone amplifier output.
- About Topping DX3 Pro+ - Equipped with the latest QCC5125 chip, it supports LDAC / AAC / SBC / APTX / APTX LL / APTX HD protocols. It uses the ES9038Q2M decoder, supports high-resolution music transmission, and can be played back with clear sound.
- Bluetooth 5.0 - Connect the Bluetooth of the phone, tablet or notebook to DX3Pro+, and connect the power amplifier, active speakers or headphones to the DX3Pro+'s output, then DX3Pro+ becomes your Bluetooth Headphone amp 1 Bluetooth DAC. You can easily enjoy the high quality music and convenience brought by Bluetooth 5.0. If your device supports LDAC transmission, you will get even better experience.
- High performance DAC for media player - Whether it is Apple IOS device, Android device and media player, as long as it supports OTG external sound card, it can be connected to the USB input of DX3Pro+ to make DX3Pro+ be their external high performance DAC.
- DAC+Pre-amplifier application - TOPPING DX3Pro+ has a simple Pre amp function that you can use to adjust the volume. The digital volume ad- justment will not has any imbalance between the left and right channels.
- See more on Amazon...
Brand: KGUSS | Manufacturer: KGUSS
Dimensions: 1.61 x 5.08 x 6.54 Inches
Warranty: 30 days return policy. One year free repair period or more.
See On Amazon #2
Topping D10s Mini USB DAC CSS XMOS XU208 ES9038Q2M OPA2134 Audio Amplifier Decoder Black
Asin: B08F54TT79 | Model: TOPPING D10s | PartNumber: TOPPING D10s | Ean: 0708200855863 | UPC: 708200855863
👍 Automatic Power On/Off ▶️ Although The Usb Port Support Power After Pc Has Shutdown,D10s Still Will Synchronously Power On/Off With Pc.
👍 Multiple Applications ▶️ ①Connect Topping D10s To Your Active Speakers.D10s Provide Not Only Dsd And Higher-Specification Pcm Compatibility But Also A Better Sound Quality Than Your Computer's Built-In Sound Card Or A Regular Dac;②You Can Connect D10s's Line Out To Your Amplifier/Headphone Amplifier's Input To Make D10s One Part Of Your Hifi System；③You Also Can Connect D10s's Coaxial/Optical Output To Your Dac, Then D10s Serve As A Usb Interface.
👍 Replaceable Op ▶️ It Has Op Amp Socket,Diyer Could Change The Op Amp To Get Different Sound.Notice:D10's Electrical Parameters Will Change If Use Other Op.
👍 Xmos Xu208 And Customized Driver ▶️ Toppping D10s Dac Use Xmos Xu208 For Usb Interface And Use Customized Driver Which From Thesycon For Better Compatibility With High Resolution Audio File Especially Dsd Native.And Use Ess Es9038q2m To Make Thd+N As Low As 0.0002%@1Khz.
Features
- Up to DSD256 and PCM384 TOPPING D10s USB DAC is compatible with 16-32bit/44.1-384kHz and DSD64 - DSD256(support both Dop and Native) If you need a DSD configuration guide, please contact the seller HIFI COLLEGE.
- XMOS XU208 and Customized Driver TOPPPING D10s DAC use XMOS XU208 for USB interface and use customized driver which from Thesycon for better compatibility with high resolution audio file especially DSD native.And use ESS ES9038Q2M to make THD+N as low as 0.0002%@1kHz
- Automatic Power On/Off Although the USB port support power after PC has shutdown,D10s still will synchronously power on/off with PC
- Replaceable OP It has OP amp socket,DIYer could change the OP amp to get different sound.Notice:D10's electrical parameters will change if use other OP
- Multiple Applications Connect TOPPING D10s to your active speakers.D10s Provide not only DSD and higher-specification PCM compatibility but also a better sound quality than your computer's built-in sound card or a regular DAC; You can connect D10s's line out to your amplifier/headphone amplifier's input to make D10s one part of your HIFI system You also can connect D10s's coaxial/optical output to your DAC, then D10s serve as a USB interface
- See more on Amazon...
Brand: KGUSS | Manufacturer: KGUSS
Weight: 0.99 pounds
Warranty: 30 days return policy. One year free repair period or more.
See On Amazon #3
Topping DX3 Pro+ ES9038Q2M Bluetooth 5.0 LDAC Audio Decoder DSD512 DAC AMP NFCA Headphone Amplifier Pre Amplifier (Black)
Asin: B09HBS8SLJ | Model: DX3 Pro+ | PartNumber: DX3 Pro+
Pre-Amplifier Function ：Adapt To Different Usage Scenarios, Dx3 Pro+ Has 4 Output Modes: Headphone Amp, Headphone Amp+ Line Out, Dac, And Pre Amplifier..
Bluetooth Headphone Amp / Bluetooth Dac Application： Connect The Bluetooth Of The Phone, Tablet Or Notebook To Dx3 Pro+, And Connect The Power Amplifier, Active Speakers Or Headphones To The Dx3 Pro+'S Output, Then Dx3 Pro+ Becomes Your Bluetooth Headphone Amp / Bluetooth Dac. If Your Device Supports Ldac Transmission, You Will Get Even Better Experience..
Pa3s Is The Best Power Amplifier For Dx3 Pro+： Pa3s Has Rca+Trs Balanced Inputs. When Used With Dx3 Pro+, The Trs Balanced Input Can Be Used To Input Other Audio Sources. The Output Power Of 80W X 2@4Ω, 10%Thd+N, 65W X 2@4Ω, 1%Thd+N Can Be Adapted To Most Situations Where Speakers Are Used..
Nfca Circuit ：The New Dx3 Pro+ Has The Nfca Circuit Optimized For This Unit, Giving The Ultra Low Noise And Distortion. It Pairs With High Sensitivity Iems And Power Hungry High Impedance Headphones Nicely..
Features
- Bluetooth 5.0 LDAC transmission DX3Pro+ has the certification of Hi-Res Audio Wireless and LDAC. It uses newest QCC5125 chipset to support LDAC/AAC/SBC/APTX/APTX LL/APTX HD protocol. To get even better sound quality from Bluetooth, we abandon the built-in DAC of QCC5125 and connect its digital signal to ES9038Q2M to decode.
- NFCA circuit The new DX3 Pro+ has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion. It pairs with high sensitivity IEMs and power hungry high impedance headphones nicely.
- Pre-amplifier function Adapt to different usage scenarios, DX3 Pro+ has 4 output modes: Headphone Amp, Headphone Amp+ Line out, DAC, and Pre amplifier.
- PA3s is the best power amplifier for DX3 Pro+ PA3s has RCA+TRS balanced inputs. When used with DX3 Pro+, the TRS balanced input can be used to input other audio sources. The output power of 80W x 2@4 , 10%THD+N, 65W X 2@4 , 1%THD+N can be adapted to most situations where speakers are used.
- Bluetooth headphone amp / Bluetooth DAC application Connect the Bluetooth of the phone, tablet or notebook to DX3 Pro+, and connect the power amplifier, active speakers or headphones to the DX3 Pro+'s output, then DX3 Pro+ becomes your Bluetooth Headphone amp / Bluetooth DAC. If your device supports LDAC transmission, you will get even better experience.
- See more on Amazon...
Brand: Fanmusic | Manufacturer: TOPPING
See On Amazon #4
Topping DX1 Mini Stereo DAC Headphone Amplifier Combo - 280mW x2 Powerful Output Two-Stage GAIN Switch USB Chargable Discrete LNRD AK4493S XU208 384kHz/32bit Native DSD256 HiFi Home Audio (Black)
Asin: B0BFVT3LV5 | Model: TOPPING-DX1-BLACK-KGUSS | PartNumber: TOPPING-DX1-BLACK-KGUSS
👍 Plug And Play ▶️ Dx1 Has A Wide Range Of Compatibility: Windows 10, Windows 11, Mac, Linux, Ios, Android Can Be Plug And Play, Don't Need To Install A Driver. ( Except Windows Asio Applications).
👍 Pure Dac Function▶️ Dx1 Has Line Out With Fixed Volume, Which Can Be Used As A Pure Dac With Headphone Amplifiers, Power Amplifiers And Other Devices.👉👉👉Note, Please Consider The Following Information Before Deciding To Add To Cart. 1. Dx1 Does Not Use Nfca Module 2. The Volume Of Line Out Is Fixed At The Maximum And Cannot Be Adjusted 3. The Headphone Amplifier Output And The Line Output Will Come Out Simultaneously.
👍 Discrete Lnrd ▶️ The Discrete Lnrd Circuit Filters Out The Noise And Interference Of Usb 5V Power And Provides Stable And Clean Power Supply Of Ultra-Low Noise Reference Level For Dx1. With This Technology, The Noise Of The Dac Part Is Lower Than 2.0Uv, And The Noise Of The Amp Part Is Lower Than 1.0Uv. Even High Sensitive Iems Will Not Be Bothered By Noise..
👍 Powerful Output For Iems And Full-Size Headphones ▶️ With High/Low Gain Options And Two Outputs (6.35Mm And 3.5Mm), The Dx1 Is Ready For Iems, Full-Size Headphones, And Everything In Between. Despite Its Small Size, It Can Output Up To 280Mwx2 @32Ω And 51Mwx2 @300Ω Of Power..
Features
- Newest 32bit-AK4493S DAC chip The DX1 uses the newest sub-flagship AK4493S chips of AKM's VELVET Sound technology. The DX1 decodes up to 32-bit/384kHz PCM in a stunning 120dB of dynamic range.
- Powerful Output for IEMs and Full-size headphones With high/low gain options and two outputs (6.35mm and 3.5mm), the DX1 is ready for IEMs, full-size headphones, and everything in between. Despite its small size, it can output up to 280mWx2 @32 and 51mWx2 @300 of power.
- Plug and Play DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play, don't need to install a driver. ( Except Windows ASIO applications)
- Discrete LNRD The Discrete LNRD circuit filters out the noise and interference of USB 5V power and provides stable and clean power supply of ultra-low noise reference level for DX1. With this technology, the noise of the DAC part is lower than 2.0uV, and the noise of the AMP part is lower than 1.0uV. Even high sensitive IEMs will not be bothered by noise.
- Pure DAC Function DX1 has Line out with fixed volume, which can be used as a pure DAC with headphone amplifiers, power amplifiers and other devices. Note, please consider the following information before deciding to add to cart. 1. DX1 does not use nfca module 2. The volume of line out is fixed at the maximum and cannot be adjusted 3. The headphone amplifier output and the line output will come out simultaneously
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
Dimensions: 0.04 x 3.94 x 3.86 inches
Warranty: One year free repair
See On Amazon #5
Topping D50 III DAC Preamplifier - LDAC Bluetooth 5.1 Dual ES9039Q2M D/A Chips Supports DSD512 PCM768kHz,PEQ Adjustment and Remote Control (Black D50III)
Asin: B0CXTCCF9H | Model: D50 III | PartNumber: D50 III
👍 Plug And Play ▶️ D50 Iii Has A Wide Range Of Compatibility And Applies To Various Os Such As Windows 10, Windows 11, Mac, Linux And Ios/Android. Only For Windows Asio Applications, You Need To Install The Driver And Set It Up. The Usb Hardware Is Based On Xmos Xu316 Andthesycon Driver (Drivers Only For Windows, Other Os Needn't Driver). In Addition, The D50 Iii Supports Up To Pcm768khz/32Bit And Dsd512..
👍 Preamplifier Function - Desktop Speaker Companion ▶️ In Addition To The Dac Mode, The D50 Iii Also Has A "Preamp" Mode. In Preamp Mode, You Can Adjust The Volume At D50 Iii, Maximizing Ease Of Use With Active Speakers Or Pure Power Amplifiers..
👍 Perfect Partner—A50 Iii ▶️ The D50 Iii And A50 Iii Have The Same Design Language. This Combination Has Unique Metallic Aesthetics No Matter How It's Placed. And They Meet The Needs Of Most Headphones And Active Speakers. The A50 Iii Can Also Be Switched On And Off With The D50 Iii Via 12V Trigger..
👍 Ten-Band Peq Adjustment ▶️ We Develop A Brand New Peq Adjustment*That Supports Ten Customizable Frequency Bands. Topping's Brand New Peq Algorithm And Desktop Software Allow You To Fine-Tune The Frequency, Gain, And Bandwidth Of Each Peq Band. The Software Supports The Import Of Target And Original Curves As Well As The Compensation Of Curves Using Target Curves. It Can Also Save Multiple Profiles For Easy Switching.*The Peq Function Supports Up To Pcm 192Khz/32Bit. This Function Is Supported Only For Usb Input..
👍 Choose Your Output Mode At Will ▶️ The D50 Iii Has Not Only Rca Output, But Also Trs Balanced Output, Which Are Widely Used In The Professional Field. In Addition To The Versatile Trs 4V And Rca 2V Outputs, The D50 Iii Adds Trs 5V And Rca 2.5V. Adapt More Devices When Selecting Trs 4V And Rca 2V. Take Performance To The Next Level When Selecting Trs 5V And Rca 2.5V..
👍 Dual Type-C Interface,Fast And Stable ▶️ Use Type-C For Signal Transmission And Power. It Is Recommended To Add An Auxiliary Power Supply For Better Performance When The D50 Iii Is Often Fixed On A Desktop Or Connected To A Cell Phone For Use..
👍Ldac Wireless Available▶️ D50 Iii Is Equipped With Qcc5125 And Bluetooth 5.1. It Is Compatible With Ldac/Aptx-Adaptive/Aptx-Hd/Aac/Sbc, Supporting Up To 96Khz/24Bit. So That High-Quality Audio Can Be Transmitted Wirelessly To Obtain Music Experience Beyond Cd Level..
Features
- TOPPING D50 III - 3rd Generation Upgraded Version The D50 III uses 2x ES9039Q2M, one for the left channel and another for the right channel,which delivers higher SNR(132dB), higher dynamic range(132dB), and lower distortion(<1.3uVrms) than the D50s. A brand new I/V conversion circuit is designed for better audio reproduction. The D50 III's ability to restore music has reached a new level with its details perfectly displayed.
- LDAC wireless available D50 III is equipped with QCC5125 and Bluetooth 5.1. It is compatible with LDAC/aptX-Adaptive/aptX-HD/AAC/SBC, supporting up to 96kHz/24bit. So that high-quality audio can be transmitted wirelessly to obtain music experience beyond CD level.
- Plug and play D50 III has a wide range of compatibility and applies to various OS such as Windows 10, Windows 11, MAC, Linux and iOS/Android. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU316 andThesycon driver (Drivers only for Windows, other OS needn't driver). In addition, the D50 III supports up to PCM768kHz/32bit and DSD512.
- Dual Type-C interface,Fast and stable Use Type-C for signal transmission and power. It is recommended to add an auxiliary power supply for better performance when the D50 III is often fixed on a desktop or connected to a cell phone for use.
- Ten-band PEQ adjustment We develop a brand new PEQ adjustment*that supports ten customizable frequency bands. Topping's brand new PEQ algorithm and desktop software allow you to fine-tune the frequency, gain, and bandwidth of each PEQ band. The software supports the import of target and original curves as well as the compensation of curves using target curves. It can also save multiple profiles for easy switching.*The PEQ function supports up to PCM 192kHz/32bit. This function is supported only for USB input.
- Choose your output mode at will The D50 III has not only RCA output, but also TRS balanced output, which are widely used in the professional field. In addition to the versatile TRS 4V and RCA 2V outputs, the D50 III adds TRS 5V and RCA 2.5V. Adapt more devices when selecting TRS 4V and RCA 2V. Take performance to the next level when selecting TRS 5V and RCA 2.5V.
- Preamplifier function - Desktop speaker companion In addition to the DAC mode, the D50 III also has a preamp mode. In preamp mode, you can adjust the volume at D50 III, maximizing ease of use with active speakers or pure power amplifiers.
- Perfect partner A50 III The D50 III and A50 III have the same design language. This combination has unique metallic aesthetics no matter how it's placed. And they meet the needs of most headphones and active speakers. The A50 III can also be switched on and off with the D50 III via 12V Trigger.
- See more on Amazon...
Brand: KGUSS | Manufacturer: Topping
See On Amazon #6
Topping E30 II DAC Preamp Audio Decoder- 2xAK4493S Hi-Res XMOS XU208 DAC 32Bit/768kHz DSD512 DSD Direct Mode for USB/Coax/Opt Inputs RCA HiFi Stereo Digital Audio Decoder(Black)
Asin: B0B7LBCLM5
👍 5V Power Supply,Anytime And Anywhere ▶️ E30 Ii Uses Dc5v For Power Supply, Which Can Easily Access Almost Everywhere. You Can Power It Up By Usb Port Of Pc, Mobile Phone Charger Or Even A Power Bank. The Built-In Protection Circuit Will Protect The E30 Ii And Prompt On The Screen After Connecting To The Wrong Power Supply..
👍 Pure Dac & Dac+Preamp Application ▶️ E30 Ii Is Able To Fix To Maxmum Output Level So That It Can Be Worked As A Pure Dac. E30 Ii Has Built-In Volume Control Function That Can Adjust The Volume From -99Db To 0Db By Using The Remote Control, So You Are Able To Directly Connect E30 Ii To Power Amplifier Or Active Speakers, And Control The Volume Of E30 Ii Through Remote Control..
👍 Discrete Lnrd ▶️ How To Solve The Noise Problem Of 5V Power Supply? The E30 Ii's Answer Is The Discrete Lnrd Circuit (Low Noise Reference Driver). The Discrete Lnrd Circuit Filters Out The Noise Of Various 5V Power Input And Provides Stable Power Supply Of Ultra-Low Noise Reference Level For E30 Ii. With This Technology, The Noise Floor Of E30 Ii Is Lower Than 1 .5Uv..
👍 Coaxial And Optical Also Has Good Performance ▶️ The Optical And Coaxial Input Of E30 Ii Supports Up To 24Bit192khz Audio, Which Is Suitable For Digital Turntables, Disk Players, Set-Top Boxes, And Game Consoles, So That Traditional Equipment Can Also Give A New Sound. The Digital Processing Module Provides Better Compatibility Than The E30..
Features
- Supports high-resolution audio TOPPING E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achieve better performance and reduction ability than a single chip.
- Coaxial and Optical also has good performance The optical and coaxial input of E30 II supports up to 24bit192kHz audio, which is suitable for digital turntables, disk players, set-top boxes, and game consoles, so that traditional equipment can also give a new sound. The Digital Processing module provides better compatibility than the E30.
- 5V power supply,anytime and anywhere E30 II uses DC5V for power supply, which can easily access almost everywhere. You can power it up by USB port of PC, mobile phone charger or even a power bank. The built-in protection circuit will protect the E30 II and prompt on the screen after connecting to the wrong power supply.
- Discrete LNRD How to solve the noise problem of 5V power supply? The E30 II's answer is the Discrete LNRD circuit (low noise reference driver). The Discrete LNRD circuit filters out the noise of various 5V power input and provides stable power supply of ultra-low noise reference level for E30 II. With this technology, the noise floor of E30 II is lower than 1 .5uV.
- Pure DAC & DAC+Preamp application E30 II is able to fix to maxmum output level so that it can be worked as a pure DAC. E30 II has built-in volume control function that can adjust the volume from -99dB to 0dB by using the remote control, so you are able to directly connect E30 II to power amplifier or active speakers, and control the volume of E30 II through remote control.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
Warranty: One year free repair
See On Amazon #7
Topping E30II lite DAC Preamp - AK4493S Hi-Res XMOS XU208 DAC 32Bit/768kHz DSD512 DSD Direct Mode for USB/Coax/Opt Inputs RCA HiFi Stereo Digital Audio Decoder(Black)
Asin: B0C9GLHRT7 | Model: E30II lite-Black | PartNumber: E30II lite-Black
👍Preamp Mode▶️ The E30 Ii Lite Is Equipped With A Built-In Volume Control Function That Makes It Easy To Adjust The Volume From -99Db To 0Db Using The Remote Control. The E30 Ii Lite Can Also Be Connected Directly To An Amplifier, Pure Power Amplifiers Or Active Speakers, Controlling The Volume Level Through The E30 Ii Lite, Allowing You To Enjoy Music More Comfortably..
👍Good Partner ——L30 Ii Headphone Amplifier ▶️ E30 Ii Lite And L30 Ii Have The Same Design Concept, Both Detailed Workmanship And Sound Quality Performance Show The High Quality Of The Product. The L30ii Headphone Amplifier Can Drive Most Of The Headphones On The Market And Match Perfectly. Whether You Are A Music Enthusiast Or An Everyday User, Its Excellent Sound Quality Can Meet Your Needs..
👍Coaxial And Optical▶️ The Optical And Coaxial Input Of E30 Ii Lite Supports Up To 24Bit/192Khz, Which Is Suitable For Digital Turntables, Cd Players, Set-Top Boxes And Game Consoles, So That Traditional Equipment Can Also Give A New Sound..
👍Professional Performance, Instant Listening▶️ E30 Ii Lite Supports Playback Of Audio Streams Up To Dsd512 And Pcm768khz. E30 Ii Lite Is Widely Compatible With Operating Systems Including Windows 10, Windows 11, Mac, Linux And Ios/Android Systems. Simply Connect The Audio Source And Use E30 Ii Lite Immediately. Only The Driver Installation And Setup Is Required To Use Asio Applications On Windows Systems*..
Features
- Supports high-resolution audio The E30 II lite uses AKM's VELVET Sound technology's sub-flagship AK4493S chip. It has won wide acclaim from audio enthusiasts for its outstanding performance and top-notch sound quality. With the AK4493S, the E30 II lite has a dynamic range of up to 121dB and THD <0.0004%. This not only ensures the high accuracy of audio signal restoration but also gives you a live music experience as if you were there.
- Professional performance, instant listening E30 II lite supports playback of audio streams up to DSD512 and PCM768kHz. E30 II lite is widely compatible with operating systems including Windows 10, Windows 11, MAC, Linux and iOS/Android systems. Simply connect the audio source and use E30 II lite immediately. Only the driver installation and setup is required to use ASIO applications on Windows systems*.
- Preamp Mode The E30 II lite is equipped with a built-in volume control function that makes it easy to adjust the volume from -99dB to 0dB using the remote control. The E30 II lite can also be connected directly to an amplifier, pure power amplifiers or active speakers, controlling the volume level through the E30 II lite, allowing you to enjoy music more comfortably.
- Coaxial and Optical The optical and coaxial input of E30 II lite supports up to 24bit/192kHz, which is suitable for digital turntables, CD players, set-top boxes and game consoles, so that traditional equipment can also give a new sound.
- Good partner L30 II headphone amplifier E30 II lite and L30 II have the same design concept, both detailed workmanship and sound quality performance show the high quality of the product. The L30II headphone amplifier can drive most of the headphones on the market and match perfectly. Whether you are a music enthusiast or an everyday user, its excellent sound quality can meet your needs.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
See On Amazon #8
KGUSS Topping A30 Pro NFCA Headphone Amplifier SE Balanced XLR 4.4mm 6.35mm Output 6000mW x 6000mW Balanced Headphone Amp for D30 Pro (Black)
Asin: B08Y8K4NHX | Model: A30pro | PartNumber: A30pro | Ean: 0747165998604 | UPC: 747165998604
►Say Good Bye To The Ground Loops Noise► When Multiple Equipment Are Used, Rca Connection May Encounter Ground Loop Noise A30pro Introduces A Gnd/Lift Switch As The Solution. When In Normal Use,Set It To Gnd; When Encountering Ground Loop Noise,Switch To Lift To Change The Ground Point Of The A30pro From The It's Chassis To Other Equipment Which It Connected To.Ground Loop Noise Disappeared.".
►D30pro Is The Best Dac For A30pro► 4 X Cs43198, Sound Of Quad Dac. Thd+N<0.00009%,Extremely Low Jitter For All Inputs..
►Incredible Output Power► The New Specifically Redesigned Nfca Based Circuit Is Optimized For Terrific Single Ended Performance . Huge Output Power And Margin Bring Excellent Control Ability, And There Are No More Headphones Hard To Drive..
►Se+Bal Input Pass Through► When Shutting Down, The Input Signal Is Directly Output To Rca Or Trs Without Amplification, Which Will Be More Suitable For Active Speakers/Monitor Speakers When The Dac Has Pre-Amplifier Functions. Even Better Is When Used With D30pro, The Excellent Noise Performance Of D30pro Is Not Wasted..
Features
- 4-Pin-XLR+4.4mm 6.35mm output Since then, buying headphones does not have to consider whether the plug matches the headphone amplifier,because the A30Pro already provides you all in a compact body,including 4-PIN XLR,4.4mm,6.35mm.
- SE+BAL input pass through When shutting down, the input signal is directly output to RCA or TRS without amplification, which will be more suitable for active speakers/monitor speakers when the DAC has pre-amplifier functions. Even better is when used with D30Pro, the excellent noise performance of D30Pro is not wasted.
- Say good bye to the ground loops noise When multiple equipment are used, RCA connection may encounter ground loop noise A30Pro introduces a GND/LIFT switch as the solution. When in normal use,set it to GND; when encountering ground loop noise,switch to LIFT to change the ground point of the A30Pro from the it's chassis to other equipment which it connected to.Ground loop noise disappeared.
- Incredible output power The new specifically redesigned NFCA based circuit is optimized for terrific single ended performance . Huge output power and margin bring excellent control ability, and there are no more headphones hard to drive.
- D30Pro is the best DAC for A30Pro 4 x CS43198, sound of quad DAC. THD+N<0.00009%,extremely low jitter for all inputs.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
Dimensions: 1.77 x 6.85 x 5.43 Inches
See On Amazon #9
Topping L30II NFCA Linear Headphone Amp - 6.35mm Jack 3.5mm Adaptor RCA Input and Output 37Vpp high Output Voltage Mini HiFi Amp Audio Hi-Res Preamplifier (Black)
Asin: B0B7JHR1RC | Model: TOPPING-L30II-BLACK-KGUSS | PartNumber: TOPPING-L30II-BLACK-KGUSS
👍 Compatible With Almost All Kinds Of Headphones ▶️ L30 Ii's Output Has High Output Voltage,High Current,Low Output Impedance,So No Headphones That Can't Be Dealt With. High Output Voltage Can Easily Drive High Impedance Headphones; High Output Current Allows Low-Sensitivity Headphones To Obtain Enough Power; The Low Output Impedance Will Not Bring Unnecessary Effect On Fr When Driving Low-Impedance Headphones. Different Headphones Can Be Easily Driven By The L30 Ii..
👍 Best Combo For Active Speakers ▶️ We Also Recommend That L30ii And E30ii Be Used With Active Speakers. Connect The Two Outputs Of L30ll To Headphones And Active Speakers. By Switching The Outputs Of L30ii, You Can Enjoy Music On Headphones And Active Speakers Respectively.
👍 Three Gain Settings To Suit Different Needs ▶️ L30 Ii Has Three Gain Options:-14Db,0Db,16.5Db.Improved Gain Settings Can Cover A Wider Range Of Needs To Meet The Needs Of Different Headphones From Low-Sensitivity Full-Sized Over-Ears To High-Sensitivity Iems.With The Help Of Extremely Low Noise 0.3Uv,Even Iems Will Not Hear Any Background Noise..
👍 Sound Quality Is Never A Problem ▶️ With The Help Of Nfca, L30 Ii Easily Reach The Top Of The Industry,And It Has Almost Perfect Performance Regardless Of Distortion, Dynamic Range,And Multi-Tone Testing..
Features
- Improved NFCA TOPPING L30 II uses redesigned NFCA (Nested Feedback Composite Amplifier) module. It provides 2x output power at 300 load compared to L30. The new circuit has 0.3uV ultra low noise and 144dB dynamic range as well as 0.00006% THD+N.
- Sound quality is never a problem With the help of NFCA, L30 II easily reach the top of the industry,and it has almost perfect performance regardless of distortion, dynamic range,and multi-tone testing.
- Compatible with almost all kinds of headphones L30 II's output has high output voltage,high current,low output impedance,so no headphones that can't be dealt with. High output voltage can easily drive high impedance headphones; High output current allows low-sensitivity headphones to obtain enough power; The low output impedance will not bring unnecessary effect on FR when driving low-impedance headphones. Different headphones can be easily driven by the L30 II.
- Three gain settings to suit different needs L30 II has three gain options:-14dB,0dB,16.5dB.Improved gain settings can cover a wider range of needs to meet the needs of different headphones from low-sensitivity full-sized over-ears to high-sensitivity IEMs.With the help of extremely low noise 0.3uV,even IEMs will not hear any background noise.
- Best combo for active speakers We also recommend that L30II and E30II be used with active speakers. Connect the two outputs of L30ll to headphones and active speakers. By switching the outputs of L30II, you can enjoy music on headphones and active speakers respectively
- See more on Amazon...
Brand: TOPPING | Manufacturer: TOPPING
See On Amazon #10
Topping A30 Pro NFCA Headphone Amplifier OPA1656 4PIN XLR 4.4MM 6.35MM Output Balanced Input Amplifier (Black)
Asin: B08Y87LK94 | Model: A30 Pro | PartNumber: A30 Pro | Ean: 0791270538873 | UPC: 791270538873
Incredible Output Power： The New Specifically Redesigned Nfca Based Circuit Is Optimized For Terrific Single Ended Performance.
The A30pro Already Provides You All In A Compact Body, Including 4-Pin-Xlr，4 .4Mm, 6.35Mm..
A30pro Provides 3 Step Gain Settings, Which Can Easily Adapt To The Huge Sensitivity Span From Iems To High Im Pedance And Full Size Over-Ears. Just Connect The Earphones And Leave The Rest To The A30pro..
A30pro Uses The New Specifically Redesigned Nfca Based Circuit Is Optimized For Terrific Single Ended Per Formance. Massive Paralleled High Performance Audio Opamp Architecture Along With Uhgf Technology Provides Excellent Dc And Ac Performance..
Features
- The THD+N of A30Pro is no higher than 0.00006% which means the A30Pro accurately restores 99.99994% of the original sound.
- A30Pro uses the new specifically redesigned NFCA based circuit is optimized for terrific single ended per formance. Massive paralleled high performance audio opamp architecture along with UHGF technology provides excellent DC and AC performance.
- Incredible output power The new specifically redesigned NFCA based circuit is optimized for terrific single ended performance
- A30Pro provides 3 step gain settings, which can easily adapt to the huge sensitivity span from IEMs to high im pedance and full size over-ears. Just connect the earphones and leave the rest to the A30Pro.
- The A30Pro already provides you all in a compact body, including 4-PIN-XLR 4 .4mm, 6.35mm.
- See more on Amazon...
Brand: TOPPING | Manufacturer: Fanmusic
See On Amazon #11
Topping D70 PRO Sabre DAC ES9039SPRO XU316 Bluetooth 5.1 LDAC Aptx-Adaptive HiFi Decoder (Black)
Asin: B0C595LYY1 | Model: D70 pro | PartNumber: D70 pro
Plug And Play: D70 Pro Sabre Has Wide Compatibility And Can Be Used On Multiple Operating Systems, Such As Windows 10, Windows 11, Mac, Linux, And I0s/Android. Simply Connect To The Audio Source And You Can Use It Immediately. It Requires Driver Installation And Setup For Asio Applications On Windows Systems Only. The Usb Hardware Is Based On Xmos Xu316 And Thesycon Custom Driver (Applicable To Windows, Other Systems Are Free Of Driver), Which Is Stable And Reliable..
Integrated Preamp Function: In Addition To The Fixed Output Level Dac Mode, The D70 Pro Sabre Also Has A "Preamp" Mode. In This Mode, The D70 Pro Sabre Can Adjust The Volume And Output Directly To The Power Amplifier Or Active Speakers..
Freely Switch Output Modes: The D70 Pro Sabre Features The Versatile Rca Single -Ended Output And The Professional Xl .R Balanced Output. Y Ou Can Turn On Only The Desired Output Channel, Or Both Outputs At The Same Time. Whether You Are Connecting Two Different Systems Or In A Situation Where You Need To Output Two Audio Signals At The Same Time, The D70 Pro Sabre Provides You With A More Convenient And Efficient Way To Output..
Bluetooth 5.1 Transmission: D70 Pro Sabre Supports Ldac / Aptx-Adaptive I Aptx Hd I Aptx 1 Aac I Sbc Audio Encoding, Allowing High Quality Audio To Be Transmitted Wirelessly For A Better Sound Experience..
Features
- Brand new I/V conversion New IV conversion circuitry is designed to give you higher quality audio playback. Our circuitry uses an exclusive design that provides lower distortion and noise while occupying a smaller volume. We strive to demonstrate the full performance of our DAC chips to bring you a more superior audio experience.
- Bluetooth 5.1 transmission: D70 Pro SABRE supports LDAC / aptX-Adaptive I aptX HD I aptX 1 AAC I SBC audio encoding, allowing high quality audio to be transmitted wirelessly for a better sound experience.
- Plug and play: D70 Pro SABRE has wide compatibility and can be used on multiple operating systems, such as Windows 10, Windows 11, MAC, Linux, and i0s/Android. Simply connect to the audio source and you can use it immediately. It requires driver installation and setup for ASIO applications on Windows systems only. The USB hardware is based on XMOS XU316 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable.
- Freely switch output modes: The D70 Pro SABRE features the versatile RCA single -ended output and the professional XL .R balanced output. Y ou can turn on only the desired output channel, or both outputs at the same time. Whether you are connecting two different systems or in a situation where you need to output two audio signals at the same time, the D70 Pro SABRE provides you with a more convenient and efficient way to output.
- Integrated preamp function: In addition to the fixed output level DAC mode, the D70 Pro SABRE also has a preamp mode. In this mode, the D70 Pro SABRE can adjust the volume and output directly to the power amplifier or active speakers.
- See more on Amazon...
Brand: Fanmusic | Manufacturer: TOPPING
See On Amazon #12
Topping D10s HiFi USB DAC XU208 ES9038Q2M DSD256 32bit/384kHz USB Input Coaxial/Optical/RCA Output Mini Digital Audio Converters Desktop Portable Decoder(Black)
Asin: B08CTZ3CH8 | Model: D10s | PartNumber: D10s | Ean: 0708200238710 | UPC: 708200238710
♫ Audio Format Andsampling Rate Indicator: D10s Can Accurately Indicate The Audio Format(Pcm Or Dsd) And Sampling Rate Of The Playing Music. Orange Led Is Soft And Not Dazzling Even At Night..
♫ Op-Amp Rolling, D10s Has Op Amp Socket, Diyer Could Change The Op Amp To Get Different Sound. Any Question, Please Contact The After Service Team..
♫ Multiple Connections: D10s Could Connect With Your Active Speakers. It Could Connect To Power/Headphone Amp. If You Have A Better Dac , You Can Connect The Coaxial /Optical Output Of D10s To Your Dac , Then D10s Serves As A Usb Interface ..
♫ Automatic Power On/Off: Even Some Usb Port Support Power After Pc Has Shut Down, D10s Still Will Synchronously Power On /Off With Pc..
Features
- Upgraded version TOPPING D10s USB DAC: Customized Thesycon driver + XMOS XU208 + ES9038Q2M + OP.
- Automatic power on/off: Even some USB port support power after PC has shut down, D10s still will synchronously power on /off with PC.
- Audio format andsampling rate indicator: D10s can accurately indicate the audio format(PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not dazzling even at night.
- Multiple connections: D10s could connect with your active speakers. It could connect to power/headphone amp. If you have a better DAC , you can connect the coaxial /optical output of D10s to your DAC , then D10s serves as a USB interface .
- OP-AMP Rolling, D10s has OP amp socket, Diyer could change the OP amp to get different sound. Any question, please contact the after service team.
- See more on Amazon...
Brand: AOSHIDA | Manufacturer: Dilvpoetry
Dimensions: 4.06 x 5.75 x 1.46 inches
See On Amazon #13
Topping D10 Balanced USB DAC ES9038Q2M XMOS XU208 PCM384kHz DSD256 HiFi DAC Decoder (Black)
Asin: B099W3335Q | Model: D10 Balanced | PartNumber: D10 Balanced
D10 Balanced Will Synchronously Power On/Off With Pc..
D10 Balanced Can Accurately Indicate The Audio Format (Pcm Or Dsd) And Sampling Rate Of The Playing Music. Orange Led Is Soft And Not Dazzling Even At Night..
D10 Balanced Supports Professional Asio Applications. When Using Asio In Mac Or Liunx, It Can Be Set In The Music Playback Software; When Using Asio With Windows, You Can Use The Customized Driver From Thesycon..
D10 Balanced Is Compatible With 16-32Bit/44.1-384Khz And Dsd64-Dsd256 Native.
Features
- You can connect D10 Balanced to your amplifier/headphone amplifir's input to make D10 Balanced one part of your HIFI system. D10 Balanced will greatly improve sound quality in case playing high resolution files.
- D10 Balanced is compatible with 16-32bit/44.1-384kHz and DSD64-DSD256 Native
- D10 Balanced will synchronously power on/off with PC.
- D10 Balanced supports professional ASIO applications. When using ASIO in MAC or Liunx, it can be set in the music playback software; when using ASIO with Windows, you can use the customized driver from Thesycon.
- D10 Balanced can accurately indicate the audio format (PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not dazzling even at night.
- See more on Amazon...
Brand: Fanmusic | Manufacturer: TOPPING
Dimensions: 0.04 x 5.75 x 4.06 inches
See On Amazon #14
Topping E30II Hi-Res Audio USB DAC 2 x AK4493S Chip XU208 DSD512 32bit/768kHz HiFi DAC USB/Opt/Coax Input RCA Analog Output Desktop Digital Audio Converters (Black)
Asin: B0B7M8ZQ63 | Model: TOPPING E30 II Black | PartNumber: TOPPING E30 II Black
【Optical And Coaxial Performance】Via The Optical And Coaxial Inputs, Enjoy 24 Bit/192Khz Hifi Audio. Breathe New Life Into Your Digital Turntables, Disk Players, Set-Top Boxes, And Game Consoles..
【Pure Dac Application】In Pure Dac Mode, Dsd Signal Will Bypass The Datt Soft Mute And ∆E Modulator To Provide You A Pure/Direct Dsd Performance..
【Discrete Lnrd】Topping Has Implements Discrete Lnrd Circuits In E30 Ii. This Circuit Modes Out All Kinds Of Noise Input By 5V Power Supply, And Effectively Lowering The Noise Floor To <1.5Uv..
【Plug And Play】Turn Your Pc Into A Hifi Source Just By Connecting It To The E30 Ii With A Usb Cable. E30ii Applicable To A Variety Of Pc Systems. Usb Input Support Up To 32Bit/768Khz, Dsd512(Active), Dsd256(Dop)..
Features
- Two AK4493S decoding chips TOPPING E30 II uses two AK4493S chips. With dual upgraded DAC chips, it achieves better SINAD, SNR, dynamic range, and noise level.
- Plug and play Turn your PC into a HIFI source just by connecting it to the E30 II with a USB cable. E30II applicable to a variety of PC systems. USB input support up to 32bit/768kHz, DSD512(Active), DSD256(Dop).
- Optical and coaxial performance Via the optical and coaxial inputs, enjoy 24 Bit/192kHz hifi audio. Breathe new life into your digital turntables, disk players, set-top boxes, and game consoles.
- Discrete LNRD TOPPING has implements discrete LNRD circuits in E30 II. This circuit modes out all kinds of noise input by 5V power supply, and effectively lowering the noise floor to <1.5uV.
- Pure DAC application In pure DAC mode, DSD signal will bypass the DATT Soft Mute and E Modulator to provide you a pure/direct DSD performance.
- See more on Amazon...
Brand: AOSHIDA | Manufacturer: TOPPING
Dimensions: 1.89 x 7.95 x 6.30 Inches | Weight: 0.66 pounds
See On Amazon #15
Topping DX7 Pro+ DAC HiFi ES9038PRO NFCA Headphone Amp I/V ConversionUSB/Bluetooth5.1/Coax/Opt/AES/IIS Input RCA/XLR 4 Pin XLR 4.4mm/6.35mm DSD512/768kHz Audio Amplifier(Black)
Asin: B0BCYQK3DB
👍Built-In Nfca Headphone Amp ▶️ The New Dx8 Pro+ Has The Nfca Circuit Optimized For This Unit, Giving The Ultra Low Noise And Distortion. It Pairs With High Sensitivity Iems And Power Hungry High Impedance Headphones Nicely..
👍Sound Simulation ▶️ According To The Unique Harmonic Performance Of Tubes And Transistors, We Added The Sound Simulation Function Of Tubes And Transistors To The Dx7 Pro+, So That You Can Hear 4 Different Performances..
👍Plug And Play ▶️ Dx7 Pro+ Has A Wide Range Of Compatibility: Windows 10 And Above, Mac, Linux, Los, Android Can Be Plug And Play. Dx7 Pro+ Uses 2Nd Generation 8 Core Xmos Xu208, Usb Supports Up To Pcm32bit768khz And Dsd513 Native..
👍Brand New I/V Conversion ▶️ A Brand New I/V Conversion Circuit Is Designed For Better Quality Audio Reproduction. The Unique Circuit Design Provided Lower Distortion, Lower Noise While Occupying Less Space. The New Circuit Is Pushed Close To The Limit Of Physics So That We Are Able To Squeeze Out The Last Bit Of Performance Of The Dac Chip..
Features
- ESS9038PRO Chip DX7 Pro+ uses ESS SABRE ES9038PRO, with 32bit Hyperstream architecture, and achieves ultra-high performance in the audio field. Each channel of the DX7 Pro+ will be arranged in parallel by 4 conventional balanced channels. This makes the performance of DX8 Pro+ even better.
- Brand New I/V Conversion A brand new I/V conversion circuit is designed for better quality audio reproduction. The unique circuit design provided lower distortion, lower noise while occupying less space. The new circuit is pushed close to the limit of physics so that we are able to squeeze out the last bit of performance of the DAC chip.
- Built-in NFCA Headphone Amp The new DX8 Pro+ has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion. It pairs with high sensitivity IEMs and power hungry high impedance headphones nicely.
- Plug and Play DX7 Pro+ has a wide range of compatibility: Windows 10 and above, MAC, Linux, lOS, Android can be plug and play. DX7 Pro+ uses 2nd generation 8 core XMOS XU208, USB supports up to PCM32bit768kHz and DSD513 native.
- Sound Simulation According to the unique harmonic performance of tubes and transistors, we added the sound simulation function of tubes and transistors to the DX7 Pro+, so that you can hear 4 different performances.
- See more on Amazon...
Brand: KGUSS | Manufacturer: KGUSS
Dimensions: 0.50 x 1.18 x 1.57 inches
See On Amazon #16
Topping RC-22 Decoder Decoding DAC's Remote Control for D70 pro, DX3 pro+,E30II,D50S, D90SE,D90LE,E70, E70V,D70, D70s, D90, DX3, DX3 pro, D30 pro,DX7, DX7 pro, DX7s, E30, E50, EX5, DX5, DM7, DX5 L
Asin: B09QKWV5C8 | Model: RC-22 | PartNumber: RC-22
【Applicable Model】Rc-22 For D30 Pro D50s D70 D70s D90 D90se Dx3 Dx3 Pro Dx3 Pro+ Dx7 Dx7 Pro Dx7s E30 E50 Ex5 Dx5 Dm7 D90le E30ii..
【Personalized Setting】Rc-22 Remote Control Button Adopts Simpler Setting, Which Is Clear And Easier To Use..
【Applicable To Multiple Models】Rc-22 Remote Controller Is Applicable To The Models Of Topping Decoder And Decoding Headphone Amplifier..
Features
- All Aluminum Gold Shell RC-22 remote controller is made of solid aluminum CNC, and the all aluminum alloy shell, gives you a different touch.
- Applicable To Multiple Models RC-22 remote controller is applicable to the models of TOPPING decoder and decoding headphone amplifier.
- Applicable Model RC-22 for D30 pro D50s D70 D70s D90 D90SE DX3 DX3 pro DX3 pro+ DX7 DX7 pro DX7s E30 E50 EX5 DX5 DM7 D90LE E30II.
- Personalized setting RC-22 remote control button adopts simpler setting, which is clear and easier to use.
- See more on Amazon...
Brand: AOSHIDA | Manufacturer: TOPPING
See On Amazon #17
Topping DX9 15th Anniversary DAC&Headphone Amplifier AK4499EQ Hi-Res Audio Support LDAC with Remote Control Decoder (Black)
Asin: B0CL5VNDCG
Flagship Chipset. Outstanding Performance Comes From A Powerful Core. The Rare And Legendary Dac Chip Ak4499eq Powers The Dx9 To Achieve 132Db Dynamic Range And Thd+N <0.00007% Harmonic Distortion. The Ak4499eq Has Four Independent Channels, Which Is Equivalent To The Performance Of Two Flagship Ak4499ex..
Hybrid Relay Volume Control. The Hybrid Network Of Resistor And Relay Provides High-Precision Volume Control, Which Greatly Optimizes The Snr And Noiseat Low Volume. Relay Control Is Mixed With Digital Volume To Further Reduce Distortion And Improve Anti-Interference Performance..
Flagship Power. The Self-Developed High-Performance Discrete Circuit Module. Lt Achieves Incredible Low Distortion With 39 Transistors Per Module, Surpassing All Kinds Of Discrete And Integrated Headphone Amplifier Circuits On The Market. Multi-Modules Can Cooperate With Each Otherto Achieve The Best Overall Performance..
Flagship Design. Balance Between Practicality And Aesthetics. The Family's Curved Aesthetics Are Integrated Into The Panoramic Sunroof Design, Providing A Precise View..
Features
- Six-channel discrete NFCA high-performance headphone amplifier module. DAC / Headphone amplifier circuits are powered independently. Fully ecological interface configuration.
- Flagship Design. Balance between practicality and aesthetics. The family's curved aesthetics are integrated into the panoramic sunroof design, providing a precise view.
- Flagship Chipset. Outstanding performance comes from a powerful core. The rare and legendary DAC chip AK4499EQ powers the DX9 to achieve 132dB dynamic range and THD+N <0.00007% harmonic distortion. The AK4499EQ has four independent channels, which is equivalent to the performance of two flagship AK4499EX.
- Flagship Power. The self-developed high-performance discrete circuit module. lt achieves incredible low distortion with 39 transistors per module, surpassing all kinds of discrete and integrated headphone amplifier circuits on the market. Multi-modules can cooperate with each otherto achieve the best overall performance.
- Hybrid relay volume control. The hybrid network of resistor and relay provides high-precision volume control, which greatly optimizes the SNR and noiseat low volume. Relay control is mixed with digital volume to further reduce distortion and improve anti-interference performance.
- See more on Amazon...
Brand: ZYCABLE | Manufacturer: TOPPING
See On Amazon #18
Topping D90 III Sabre MQA Full Balance HiFi DAC Bluetooth 5.1 ES9039SPROx2 DSD512 PCM32bit/768kHz USB/Coax/Opt/AES/IIS Desktop Audio Preamp (Black)
Asin: B0CQJVDTRH | Model: TOPPING D90 III SABRE | PartNumber: TOPPING D90 III SABRE
Brand New I/V Conversion - A Brand New I/V Conversion Circuit Is Designed For Better Quality Audio Reproduction. The New Circuit Design Provides Lower Distortion And Lower Noise While Occupying Less Space. The New Circuit Is Pushed Close To The Limit Of Physics So That We Are Able To Squeeze Out The Last Bit Of Performance Of The Dac Chip..
Universal Compatibility And Ease Of Use - The D90 Iii Is A Breeze To Use With Its Wide Compatibility Range. It Supports Various Operating Systems Like Windows, Mac, Linux, And Ios/Android. For Windows Asio, A Simple Driver Setup Is All It Takes. The Device's Usb Hardware Is Based On Xmos Xu316 And Thesycon Drivers, Ensuring Stability And Reliability..
Ldac Wireless Available - D90 Iii Sabre Is Equipped With Qcc5125 And Bluetooth 5.1, Supports Ldac/Aptx-Adaptive/Aptx-Hd/Aac/Sbc. It Can Support Up To 96Khz/24Bit, So That High-Quality Audio Can Be Transmitted Wirelessly To Obtain Music Experience Beyond Cd Level..
Advanced Cpld Processing - We Achieved Incredible Jitter Rejection Using Cpld To Process The Clock Signal And Optimize The Digital Signal.Regardless Of Usb, Optical, Coaxial, Aes Input, Jitter Is As Low As -160Db..
Features
- Two ES9039SPRO chips - Each of the left and right audio channels independently utilizes an ES9039SPRO, providing higher SNR (135dB) , greater dynamic range, and lower distortion (<0.000045% THD+N) compared to the D90SE. Clearer details flow into your ears.
- Advanced CPLD processing - We achieved incredible jitter rejection using CPLD to process the clock signal and optimize the digital signal.Regardless of USB, optical, coaxial, AES input, jitter is as low as -160dB.
- Brand new I/V conversion - A brand new I/V conversion circuit is designed for better quality audio reproduction. The new circuit design provides lower distortion and lower noise while occupying less space. The new circuit is pushed close to the limit of physics so that we are able to squeeze out the last bit of performance of the DAC chip.
- LDAC wireless available - D90 III SABRE is equipped with QCC5125 and Bluetooth 5.1, supports LDAC/aptX-Adaptive/aptX-HD/AAC/SBC. It can support up to 96kHz/24bit, so that high-quality audio can be transmitted wirelessly to obtain music experience beyond CD level.
- Universal compatibility and ease of use - The D90 III is a breeze to use with its wide compatibility range. It supports various operating systems like Windows, Mac, Linux, and iOS/Android. For Windows ASIO, a simple driver setup is all it takes. The device's USB hardware is based on XMOS XU316 and Thesycon drivers, ensuring stability and reliability.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
Dimensions: 1.77 x 9.06 x 6.30 Inches
See On Amazon #19
Topping A90 Discrete NFCA Headphone Amplifier Pre-Amplifier 6.35mm/4.4mm Balanced/4-Pin-XLR Headphone Output R2R Relay Volume Control (Black)
Asin: B0B4JQD8G7 | Model: A90D-B | PartNumber: A90D-B
►2 Gain Settings► Topping A90 Discrete Has Two Gain Options, Which Are Enough To Cover A Wide Variety Of Headphones: Low Gain To Drive The Iems With High Sensitivity, And High Gain To Drive Full-Sized Over-Ears. Combined With The 0.2Uvrms Ultra-Low Noise, Even Sensitive Lems Will Not Suffer From Any Noise..
►A Headphone Amp, Also A Preamp► When It Is In Preamp Mode, You Can Get The Same High Performance As The Headphone Amp Mode, And The 20Ohm Se And 40Ohm Balanced Output Impedance Are Widely Suitable For Various Power Amplifiers. A90 Discrete Can Not Only Switch Between The Headphone Amp (Only Output From The Headphone Jack) And The Preamp(Only Output From Rca And Xlr), But Also Support The Output From All At The Same Time..
►Ground Loop Noise Terminator► Ground Loop Noise May Be Encountered When Multiple Devices Are Used In Combination. A90 Discrete Adds A Gnd/Lift Switch To Solve This Problem. When In Normal Use, Set It To Gnd; And When Ground Loop Noise Is Encountered, Switch It To Lift. Then The Ground Loop Noise Is Eliminated..
►High Output Voltage, High Current, Low Output Impedance, No Headphones That Can't Be Dealt With►High Output Voltage Can Easily Drive High Impedance Headphones; High Output Current Allows Low-Sensitivity Headphones To Obtain Enough Power; The Low Output Impedance Will Not Bring Unnecessary Effect On Fr When Driving Low-Impedance Headphones. Different Headphones Can Be Easily Driven By The A90 Discrete..
Features
- Fully discrete NFCA also create wonderful amp TOPPING A90D uses fully discrete components to redesign the NFCA (Nested Feedback Composite Amplifier)module. 4 built-in NFCA-Discrete modules which each them uses 39 transistors build up fully balanced structure. The optimized Voltage Current hybrid feedback architecture along with UHGF (Ultra High Gain Feedback) technology provide excellent DC and AC performance.
- High output voltage, high current, low output impedance, no headphones that can't be dealt with High output voltage can easily drive high impedance headphones; High output current allows low-sensitivity headphones to obtain enough power; The low output impedance will not bring unnecessary effect on FR when driving low-impedance headphones. Different headphones can be easily driven by the A90 Discrete.
- 2 Gain settings TOPPING A90 Discrete has two gain options, which are enough to cover a wide variety of headphones: low gain to drive the IEMs with high sensitivity, and high gain to drive full-sized over-ears. Combined with the 0.2uVrms ultra-low noise, even sensitive lEMs will not suffer from any noise.
- Ground Loop Noise Terminator Ground loop noise may be encountered when multiple devices are used in combination. A90 Discrete adds a GND/LIFT switch to solve this problem. When in normal use, set it to GND; and when ground loop noise is encountered, switch it to LIFT. Then the ground loop noise is eliminated.
- A Headphone Amp, also a Preamp When it is in preamp mode, you can get the same high performance as the headphone amp mode, and the 20ohm SE and 40ohm balanced output impedance are widely suitable for various power amplifiers. A90 Discrete can not only switch between the headphone amp (only output from the headphone jack) and the preamp(only output from RCA and XLR), but also support the output from all at the same time.
- See more on Amazon...
Brand: KGUSS | Manufacturer: KGUSS
Weight: 2.76 Pounds
Warranty: One year free repair
See On Amazon
Looking For Something Else?
Search