Topping DX3 Pro+ ES9038Q2M Bluetooth 5.0 LDAC Audio Decoder DSD512 DAC AMP NFCA Headphone Amplifier Pre Amplifier (Black)
Asin: B09HBS8SLJ | Model: DX3 Pro+ | PartNumber: DX3 Pro+
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Pre-Amplifier Function ：Adapt To Different Usage Scenarios, Dx3 Pro+ Has 4 Output Modes: Headphone Amp, Headphone Amp+ Line Out, Dac, And Pre Amplifier..
Bluetooth Headphone Amp / Bluetooth Dac Application： Connect The Bluetooth Of The Phone, Tablet Or Notebook To Dx3 Pro+, And Connect The Power Amplifier, Active Speakers Or Headphones To The Dx3 Pro+'S Output, Then Dx3 Pro+ Becomes Your Bluetooth Headphone Amp / Bluetooth Dac. If Your Device Supports Ldac Transmission, You Will Get Even Better Experience..
Pa3s Is The Best Power Amplifier For Dx3 Pro+： Pa3s Has Rca+Trs Balanced Inputs. When Used With Dx3 Pro+, The Trs Balanced Input Can Be Used To Input Other Audio Sources. The Output Power Of 80W X 2@4Ω, 10%Thd+N, 65W X 2@4Ω, 1%Thd+N Can Be Adapted To Most Situations Where Speakers Are Used..
Nfca Circuit ：The New Dx3 Pro+ Has The Nfca Circuit Optimized For This Unit, Giving The Ultra Low Noise And Distortion. It Pairs With High Sensitivity Iems And Power Hungry High Impedance Headphones Nicely..
Features
- Bluetooth 5.0 LDAC transmission DX3Pro+ has the certification of Hi-Res Audio Wireless and LDAC. It uses newest QCC5125 chipset to support LDAC/AAC/SBC/APTX/APTX LL/APTX HD protocol. To get even better sound quality from Bluetooth, we abandon the built-in DAC of QCC5125 and connect its digital signal to ES9038Q2M to decode.
- NFCA circuit The new DX3 Pro+ has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion. It pairs with high sensitivity IEMs and power hungry high impedance headphones nicely.
- Pre-amplifier function Adapt to different usage scenarios, DX3 Pro+ has 4 output modes: Headphone Amp, Headphone Amp+ Line out, DAC, and Pre amplifier.
- PA3s is the best power amplifier for DX3 Pro+ PA3s has RCA+TRS balanced inputs. When used with DX3 Pro+, the TRS balanced input can be used to input other audio sources. The output power of 80W x 2@4 , 10%THD+N, 65W X 2@4 , 1%THD+N can be adapted to most situations where speakers are used.
- Bluetooth headphone amp / Bluetooth DAC application Connect the Bluetooth of the phone, tablet or notebook to DX3 Pro+, and connect the power amplifier, active speakers or headphones to the DX3 Pro+'s output, then DX3 Pro+ becomes your Bluetooth Headphone amp / Bluetooth DAC. If your device supports LDAC transmission, you will get even better experience.
- See more on Amazon...
Brand: Fanmusic | Manufacturer: TOPPING
See On Amazon Similar To Topping DX3 Pro ES9038Q2M Bluetooth
#1
Topping DX3pro+ LDAC Headphone Amplifier - ES9038Q2M XU208 NFCA Bluetooth5.0 Audio Decoder USB/Opt/Coax DAC AMP Pre Amplifier with Remote Control (Black)
Asin: B09JC3TCJF | Model: TOPPING DX3pro+ | PartNumber: TOPPING DX3pro+
🎵 Bluetooth 5.0 - Connect The Bluetooth Of The Phone, Tablet Or Notebook To Dx3pro+, And Connect The Power Amplifier, Active Speakers Or Headphones To The Dx3pro+'S Output, Then Dx3pro+ Becomes Your Bluetooth Headphone Amp 1 Bluetooth Dac. You Can Easily Enjoy The High Quality Music And Convenience Brought By Bluetooth 5.0. If Your Device Supports Ldac Transmission, You Will Get Even Better Experience..
🎵 Dac+Pre-Amplifier Application - Topping Dx3pro+ Has A Simple Pre Amp Function That You Can Use To Adjust The Volume. The Digital Volume Ad- Justment Will Not Has Any Imbalance Between The Left And Right Channels..
🎵 High Performance Dac For Media Player - Whether It Is Apple Ios Device, Android Device And Media Player, As Long As It Supports Otg External Sound Card, It Can Be Connected To The Usb Input Of Dx3pro+ To Make Dx3pro+ Be Their External High Performance Dac..
🎵 About Topping Dx3 Pro+ - Equipped With The Latest Qcc5125 Chip, It Supports Ldac / Aac / Sbc / Aptx / Aptx Ll / Aptx Hd Protocols. It Uses The Es9038q2m Decoder, Supports High-Resolution Music Transmission, And Can Be Played Back With Clear Sound..
Features
- High-end audio - TOPPING DX3 Pro+ DAC is a high-performance DAC with USB, optical fiber, coaxial, Bluetooth input, Line Out, and headphone amplifier output.
- About Topping DX3 Pro+ - Equipped with the latest QCC5125 chip, it supports LDAC / AAC / SBC / APTX / APTX LL / APTX HD protocols. It uses the ES9038Q2M decoder, supports high-resolution music transmission, and can be played back with clear sound.
- Bluetooth 5.0 - Connect the Bluetooth of the phone, tablet or notebook to DX3Pro+, and connect the power amplifier, active speakers or headphones to the DX3Pro+'s output, then DX3Pro+ becomes your Bluetooth Headphone amp 1 Bluetooth DAC. You can easily enjoy the high quality music and convenience brought by Bluetooth 5.0. If your device supports LDAC transmission, you will get even better experience.
- High performance DAC for media player - Whether it is Apple IOS device, Android device and media player, as long as it supports OTG external sound card, it can be connected to the USB input of DX3Pro+ to make DX3Pro+ be their external high performance DAC.
- DAC+Pre-amplifier application - TOPPING DX3Pro+ has a simple Pre amp function that you can use to adjust the volume. The digital volume ad- justment will not has any imbalance between the left and right channels.
- See more on Amazon...
Brand: KGUSS | Manufacturer: KGUSS
Dimensions: 1.61 x 5.08 x 6.54 Inches
Warranty: 30 days return policy. One year free repair period or more.
See On Amazon #2
SMSL C200 Balanced Headphone Amplifier, HiFi DAC Amp, XMOS ES9038Q2M OPA1612, USB/BT/Opt/Coax Input TRS/RCA Line Out, 4.4mm/6.35mm Jack DSD512 32Bit/768kHz Home Audio DAC for Switch Xbox PS4 PS5
Asin: B0B9391B45 | Model: C200 | PartNumber: C200
【Usb Support Ps5 Switch Pc】: U1.1 Mode Could Work With Switch Xbox, Ps4, Ps5, Don't Need Driver. Usb1.1 Only Supports Up To 24Bit/96Khz. U2.0 Mode Could Work With Pc, Phone,Etc. It Needs Driver With Win System. Please Set The Corresponding Usb Mode According To The Audio Source Device..
√ If You Have Any Questions During Use, Aoshida Will Quickly Guide You To Solve Them..
【High Quality Design】C200 With High Quality Gold Plated Input And Output Connection Terminals. Built-In Discrete Component Linear Power Supply And Multiple Low-Noise Power Supplies For Analog Circuits. With Remote Control..
【Input And Output Modes】When Using C200, Please Adjust C200 To The Corresponding Input Mode According To Your Device..
【2Nd Generation Xmos Solution】C200 Supports Dop64 And Native Dsd512, And Pcm Supports Up To 32Bit/768Khz; Coaxial And Optical Supports Dop64..
【Multiple Input And Output Modes】Smsl C200 Support Rca Single Ended Line/Trs Balanced Output/4.4Mm Balanced/6.35Mm Earphone Jack Output And Usb/Optical/Coaxial/Bluetooth Input. Two Kinds Of Headphone Output Jack To Meet Different Headphone Needs..
Features
- SMSL C200 DAC C200 is ESS high-end D/A chip ES9038Q2M; 4 x high-end dual OP amp OPA1612 and a large number of audio grade components; Bluetooth 5.1 chip supports receiving LDAC, 24bit/96kHz, APTX/HD, SBC, AAC.
- Multiple input and output modes SMSL C200 support RCA single ended line/TRS balanced output/4.4mm balanced/6.35mm Earphone Jack Output and USB/Optical/Coaxial/Bluetooth input. Two kinds of headphone output jack to meet different headphone needs.
- USB support PS5 Switch PC : U1.1 mode could work with Switch XBOX, PS4, PS5, don't need driver. USB1.1 only supports up to 24bit/96kHz. U2.0 mode could work with pc, phone,etc. It needs driver with WIN system. Please set the corresponding USB mode according to the audio source device.
- 2nd generation XMOS solution C200 supports DoP64 and native DSD512, and PCM supports up to 32bit/768kHz; Coaxial and optical supports DOP64.
- High Quality Design C200 with high quality gold plated input and output connection terminals. Built-in discrete component linear power supply and multiple low-noise power supplies for analog circuits. With remote control.
- Input and output modes When using C200, please adjust C200 to the corresponding input mode according to your device.
- If you have any questions during use, AOSHIDA will quickly guide you to solve them.
- See more on Amazon...
Brand: S.M.S.L | Manufacturer: SMSL
Dimensions: 1.26 x 5.79 x 5.47 Inches | Weight: 1.10 pounds
Warranty: One year warranty
See On Amazon #3
Topping D50 III DAC Preamplifier - LDAC Bluetooth 5.1 Dual ES9039Q2M D/A Chips Supports DSD512 PCM768kHz,PEQ Adjustment and Remote Control (Black D50III)
Asin: B0CXTCCF9H | Model: D50 III | PartNumber: D50 III
👍 Plug And Play ▶️ D50 Iii Has A Wide Range Of Compatibility And Applies To Various Os Such As Windows 10, Windows 11, Mac, Linux And Ios/Android. Only For Windows Asio Applications, You Need To Install The Driver And Set It Up. The Usb Hardware Is Based On Xmos Xu316 Andthesycon Driver (Drivers Only For Windows, Other Os Needn't Driver). In Addition, The D50 Iii Supports Up To Pcm768khz/32Bit And Dsd512..
👍 Preamplifier Function - Desktop Speaker Companion ▶️ In Addition To The Dac Mode, The D50 Iii Also Has A "Preamp" Mode. In Preamp Mode, You Can Adjust The Volume At D50 Iii, Maximizing Ease Of Use With Active Speakers Or Pure Power Amplifiers..
👍 Perfect Partner—A50 Iii ▶️ The D50 Iii And A50 Iii Have The Same Design Language. This Combination Has Unique Metallic Aesthetics No Matter How It's Placed. And They Meet The Needs Of Most Headphones And Active Speakers. The A50 Iii Can Also Be Switched On And Off With The D50 Iii Via 12V Trigger..
👍 Ten-Band Peq Adjustment ▶️ We Develop A Brand New Peq Adjustment*That Supports Ten Customizable Frequency Bands. Topping's Brand New Peq Algorithm And Desktop Software Allow You To Fine-Tune The Frequency, Gain, And Bandwidth Of Each Peq Band. The Software Supports The Import Of Target And Original Curves As Well As The Compensation Of Curves Using Target Curves. It Can Also Save Multiple Profiles For Easy Switching.*The Peq Function Supports Up To Pcm 192Khz/32Bit. This Function Is Supported Only For Usb Input..
👍 Choose Your Output Mode At Will ▶️ The D50 Iii Has Not Only Rca Output, But Also Trs Balanced Output, Which Are Widely Used In The Professional Field. In Addition To The Versatile Trs 4V And Rca 2V Outputs, The D50 Iii Adds Trs 5V And Rca 2.5V. Adapt More Devices When Selecting Trs 4V And Rca 2V. Take Performance To The Next Level When Selecting Trs 5V And Rca 2.5V..
👍 Dual Type-C Interface,Fast And Stable ▶️ Use Type-C For Signal Transmission And Power. It Is Recommended To Add An Auxiliary Power Supply For Better Performance When The D50 Iii Is Often Fixed On A Desktop Or Connected To A Cell Phone For Use..
👍Ldac Wireless Available▶️ D50 Iii Is Equipped With Qcc5125 And Bluetooth 5.1. It Is Compatible With Ldac/Aptx-Adaptive/Aptx-Hd/Aac/Sbc, Supporting Up To 96Khz/24Bit. So That High-Quality Audio Can Be Transmitted Wirelessly To Obtain Music Experience Beyond Cd Level..
Features
- TOPPING D50 III - 3rd Generation Upgraded Version The D50 III uses 2x ES9039Q2M, one for the left channel and another for the right channel,which delivers higher SNR(132dB), higher dynamic range(132dB), and lower distortion(<1.3uVrms) than the D50s. A brand new I/V conversion circuit is designed for better audio reproduction. The D50 III's ability to restore music has reached a new level with its details perfectly displayed.
- LDAC wireless available D50 III is equipped with QCC5125 and Bluetooth 5.1. It is compatible with LDAC/aptX-Adaptive/aptX-HD/AAC/SBC, supporting up to 96kHz/24bit. So that high-quality audio can be transmitted wirelessly to obtain music experience beyond CD level.
- Plug and play D50 III has a wide range of compatibility and applies to various OS such as Windows 10, Windows 11, MAC, Linux and iOS/Android. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU316 andThesycon driver (Drivers only for Windows, other OS needn't driver). In addition, the D50 III supports up to PCM768kHz/32bit and DSD512.
- Dual Type-C interface,Fast and stable Use Type-C for signal transmission and power. It is recommended to add an auxiliary power supply for better performance when the D50 III is often fixed on a desktop or connected to a cell phone for use.
- Ten-band PEQ adjustment We develop a brand new PEQ adjustment*that supports ten customizable frequency bands. Topping's brand new PEQ algorithm and desktop software allow you to fine-tune the frequency, gain, and bandwidth of each PEQ band. The software supports the import of target and original curves as well as the compensation of curves using target curves. It can also save multiple profiles for easy switching.*The PEQ function supports up to PCM 192kHz/32bit. This function is supported only for USB input.
- Choose your output mode at will The D50 III has not only RCA output, but also TRS balanced output, which are widely used in the professional field. In addition to the versatile TRS 4V and RCA 2V outputs, the D50 III adds TRS 5V and RCA 2.5V. Adapt more devices when selecting TRS 4V and RCA 2V. Take performance to the next level when selecting TRS 5V and RCA 2.5V.
- Preamplifier function - Desktop speaker companion In addition to the DAC mode, the D50 III also has a preamp mode. In preamp mode, you can adjust the volume at D50 III, maximizing ease of use with active speakers or pure power amplifiers.
- Perfect partner A50 III The D50 III and A50 III have the same design language. This combination has unique metallic aesthetics no matter how it's placed. And they meet the needs of most headphones and active speakers. The A50 III can also be switched on and off with the D50 III via 12V Trigger.
- See more on Amazon...
Brand: KGUSS | Manufacturer: Topping
See On Amazon #4
Topping DX1 Mini Stereo DAC Headphone Amplifier Combo - 280mW x2 Powerful Output Two-Stage GAIN Switch USB Chargable Discrete LNRD AK4493S XU208 384kHz/32bit Native DSD256 HiFi Home Audio (Black)
Asin: B0BFVT3LV5 | Model: TOPPING-DX1-BLACK-KGUSS | PartNumber: TOPPING-DX1-BLACK-KGUSS
👍 Plug And Play ▶️ Dx1 Has A Wide Range Of Compatibility: Windows 10, Windows 11, Mac, Linux, Ios, Android Can Be Plug And Play, Don't Need To Install A Driver. ( Except Windows Asio Applications).
👍 Pure Dac Function▶️ Dx1 Has Line Out With Fixed Volume, Which Can Be Used As A Pure Dac With Headphone Amplifiers, Power Amplifiers And Other Devices.👉👉👉Note, Please Consider The Following Information Before Deciding To Add To Cart. 1. Dx1 Does Not Use Nfca Module 2. The Volume Of Line Out Is Fixed At The Maximum And Cannot Be Adjusted 3. The Headphone Amplifier Output And The Line Output Will Come Out Simultaneously.
👍 Discrete Lnrd ▶️ The Discrete Lnrd Circuit Filters Out The Noise And Interference Of Usb 5V Power And Provides Stable And Clean Power Supply Of Ultra-Low Noise Reference Level For Dx1. With This Technology, The Noise Of The Dac Part Is Lower Than 2.0Uv, And The Noise Of The Amp Part Is Lower Than 1.0Uv. Even High Sensitive Iems Will Not Be Bothered By Noise..
👍 Powerful Output For Iems And Full-Size Headphones ▶️ With High/Low Gain Options And Two Outputs (6.35Mm And 3.5Mm), The Dx1 Is Ready For Iems, Full-Size Headphones, And Everything In Between. Despite Its Small Size, It Can Output Up To 280Mwx2 @32Ω And 51Mwx2 @300Ω Of Power..
Features
- Newest 32bit-AK4493S DAC chip The DX1 uses the newest sub-flagship AK4493S chips of AKM's VELVET Sound technology. The DX1 decodes up to 32-bit/384kHz PCM in a stunning 120dB of dynamic range.
- Powerful Output for IEMs and Full-size headphones With high/low gain options and two outputs (6.35mm and 3.5mm), the DX1 is ready for IEMs, full-size headphones, and everything in between. Despite its small size, it can output up to 280mWx2 @32 and 51mWx2 @300 of power.
- Plug and Play DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play, don't need to install a driver. ( Except Windows ASIO applications)
- Discrete LNRD The Discrete LNRD circuit filters out the noise and interference of USB 5V power and provides stable and clean power supply of ultra-low noise reference level for DX1. With this technology, the noise of the DAC part is lower than 2.0uV, and the noise of the AMP part is lower than 1.0uV. Even high sensitive IEMs will not be bothered by noise.
- Pure DAC Function DX1 has Line out with fixed volume, which can be used as a pure DAC with headphone amplifiers, power amplifiers and other devices. Note, please consider the following information before deciding to add to cart. 1. DX1 does not use nfca module 2. The volume of line out is fixed at the maximum and cannot be adjusted 3. The headphone amplifier output and the line output will come out simultaneously
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
Dimensions: 0.04 x 3.94 x 3.86 Inches
Warranty: One year free repair
See On Amazon #5
TOPPING DX3Pro+ LDAC NFCA Headphone Amplifier ES9038Q2M XMOS XU208 DAC Amp USB/Opt/Coax/Bluetooth DSD512 PCM768 Hi-Res Audio DAC DX3pro Plus with Remote Control (Black)
Asin: B09HBJ1WK6 | Model: TOPPING DX3 Pro+ | PartNumber: TOPPING DX3 Pro+
【Plug And Play, Turn Pc Into A Hifi Source】Dx3 Pro + Uses 2Nd Generation 8 Core Xmos Xu208, Usb Supports Up To Pcm32bit/768Khz And Dsd512 Native. It Also Compatible With A Variety Of Hifi Systems. And All Inputs Have Achieved Low Jitter, Let Listen To Music More Freely..
【Dac+Pre-Amplifier Application】Dx3pro+ Has A Simple Pre-Amp Function That You Can Use To Adjust The Volume. The Digital Volume Adjustment Will Not Has Any Imbalance Between The Left And Right Channels. Note: The Voltage Of The Power Adapter For Dx3pro+Is 15V..
The Voltage Of Dx3pro+ Supports 110-230V, Suitable For All Countries..
【Nfca Circuit And Decoding Amp Application】Dx3 Pro+ Has A Built-In Nfca Headphone Amplifier Module Tailored To It, Providing Low Noise And Distortion Far Superior To The Industry. Connect The Digital Signal And Earphone To Dx3 Pro+, It Can Be Used As A Decoder + Earphone, Bringing You Every Detail Of Music..
【High Performance Dac Circuit】Es9038q2m Through Meticulous Engineering Design And Attention To Details, Dx3 Pro+ Achieves 0.00015% Thd+N, Completely And High-Fidelity Restore The Sound Quality Of The Studio..
Features
- Bluetooth 5.0 & LDAC Transmission DX3 Pro+ is equipped with new QCC5125 Bluetooth chip and supports audio encoding such as LDAC/AAC/SBC/APTX/APTX LL/APTX HD. The audio is transmitted Wirelessly and decoded using ES9038Q2M for better sound quality.
- High Performance DAC Circuit ES9038Q2M through meticulous engineering design and attention to details, DX3 Pro+ achieves 0.00015% THD+N, completely and high-fidelity restore the sound quality of the studio.
- Plug And Play, Turn PC Into a HIFI Source Dx3 Pro + uses 2nd generation 8 core XMOS XU208, USB supports up to PCM32bit/768kHz and DSD512 native. It also compatible with a variety of HIFI systems. And all inputs have achieved low Jitter, let listen to music more freely.
- NFCA Circuit And Decoding Amp Application DX3 Pro+ has a built-in NFCA headphone amplifier module tailored to it, providing low noise and distortion far superior to the industry. Connect the digital signal and earphone to DX3 Pro+, it can be used as a decoder + earphone, bringing you every detail of music.
- DAC+Pre-amplifier application DX3Pro+ has a simple Pre-amp function that you can use to adjust the volume. The digital volume adjustment will not has any imbalance between the left and right channels. Note: The voltage of the power adapter for DX3pro+is 15V.
- The voltage of DX3pro+ supports 110-230V, suitable for all countries.
- See more on Amazon...
Brand: TOPPING | Manufacturer: TOPPING
Dimensions: 1.57 x 4.72 x 6.50 Inches | Weight: 1.10 pounds
See On Amazon #6
Topping D70 PRO Sabre DAC ES9039SPRO XU316 Bluetooth 5.1 LDAC Aptx-Adaptive HiFi Decoder (Black)
Asin: B0C595LYY1 | Model: D70 pro | PartNumber: D70 pro
Plug And Play: D70 Pro Sabre Has Wide Compatibility And Can Be Used On Multiple Operating Systems, Such As Windows 10, Windows 11, Mac, Linux, And I0s/Android. Simply Connect To The Audio Source And You Can Use It Immediately. It Requires Driver Installation And Setup For Asio Applications On Windows Systems Only. The Usb Hardware Is Based On Xmos Xu316 And Thesycon Custom Driver (Applicable To Windows, Other Systems Are Free Of Driver), Which Is Stable And Reliable..
Integrated Preamp Function: In Addition To The Fixed Output Level Dac Mode, The D70 Pro Sabre Also Has A "Preamp" Mode. In This Mode, The D70 Pro Sabre Can Adjust The Volume And Output Directly To The Power Amplifier Or Active Speakers..
Freely Switch Output Modes: The D70 Pro Sabre Features The Versatile Rca Single -Ended Output And The Professional Xl .R Balanced Output. Y Ou Can Turn On Only The Desired Output Channel, Or Both Outputs At The Same Time. Whether You Are Connecting Two Different Systems Or In A Situation Where You Need To Output Two Audio Signals At The Same Time, The D70 Pro Sabre Provides You With A More Convenient And Efficient Way To Output..
Bluetooth 5.1 Transmission: D70 Pro Sabre Supports Ldac / Aptx-Adaptive I Aptx Hd I Aptx 1 Aac I Sbc Audio Encoding, Allowing High Quality Audio To Be Transmitted Wirelessly For A Better Sound Experience..
Features
- Brand new I/V conversion New IV conversion circuitry is designed to give you higher quality audio playback. Our circuitry uses an exclusive design that provides lower distortion and noise while occupying a smaller volume. We strive to demonstrate the full performance of our DAC chips to bring you a more superior audio experience.
- Bluetooth 5.1 transmission: D70 Pro SABRE supports LDAC / aptX-Adaptive I aptX HD I aptX 1 AAC I SBC audio encoding, allowing high quality audio to be transmitted wirelessly for a better sound experience.
- Plug and play: D70 Pro SABRE has wide compatibility and can be used on multiple operating systems, such as Windows 10, Windows 11, MAC, Linux, and i0s/Android. Simply connect to the audio source and you can use it immediately. It requires driver installation and setup for ASIO applications on Windows systems only. The USB hardware is based on XMOS XU316 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable.
- Freely switch output modes: The D70 Pro SABRE features the versatile RCA single -ended output and the professional XL .R balanced output. Y ou can turn on only the desired output channel, or both outputs at the same time. Whether you are connecting two different systems or in a situation where you need to output two audio signals at the same time, the D70 Pro SABRE provides you with a more convenient and efficient way to output.
- Integrated preamp function: In addition to the fixed output level DAC mode, the D70 Pro SABRE also has a preamp mode. In this mode, the D70 Pro SABRE can adjust the volume and output directly to the power amplifier or active speakers.
- See more on Amazon...
Brand: Fanmusic | Manufacturer: TOPPING
See On Amazon #7
Topping DX7 Pro+ DAC HiFi ES9038PRO NFCA Headphone Amp I/V ConversionUSB/Bluetooth5.1/Coax/Opt/AES/IIS Input RCA/XLR 4 Pin XLR 4.4mm/6.35mm DSD512/768kHz Audio Amplifier(Black)
Asin: B0BCYQK3DB
👍Built-In Nfca Headphone Amp ▶️ The New Dx8 Pro+ Has The Nfca Circuit Optimized For This Unit, Giving The Ultra Low Noise And Distortion. It Pairs With High Sensitivity Iems And Power Hungry High Impedance Headphones Nicely..
👍Sound Simulation ▶️ According To The Unique Harmonic Performance Of Tubes And Transistors, We Added The Sound Simulation Function Of Tubes And Transistors To The Dx7 Pro+, So That You Can Hear 4 Different Performances..
👍Plug And Play ▶️ Dx7 Pro+ Has A Wide Range Of Compatibility: Windows 10 And Above, Mac, Linux, Los, Android Can Be Plug And Play. Dx7 Pro+ Uses 2Nd Generation 8 Core Xmos Xu208, Usb Supports Up To Pcm32bit768khz And Dsd513 Native..
👍Brand New I/V Conversion ▶️ A Brand New I/V Conversion Circuit Is Designed For Better Quality Audio Reproduction. The Unique Circuit Design Provided Lower Distortion, Lower Noise While Occupying Less Space. The New Circuit Is Pushed Close To The Limit Of Physics So That We Are Able To Squeeze Out The Last Bit Of Performance Of The Dac Chip..
Features
- ESS9038PRO Chip DX7 Pro+ uses ESS SABRE ES9038PRO, with 32bit Hyperstream architecture, and achieves ultra-high performance in the audio field. Each channel of the DX7 Pro+ will be arranged in parallel by 4 conventional balanced channels. This makes the performance of DX8 Pro+ even better.
- Brand New I/V Conversion A brand new I/V conversion circuit is designed for better quality audio reproduction. The unique circuit design provided lower distortion, lower noise while occupying less space. The new circuit is pushed close to the limit of physics so that we are able to squeeze out the last bit of performance of the DAC chip.
- Built-in NFCA Headphone Amp The new DX8 Pro+ has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion. It pairs with high sensitivity IEMs and power hungry high impedance headphones nicely.
- Plug and Play DX7 Pro+ has a wide range of compatibility: Windows 10 and above, MAC, Linux, lOS, Android can be plug and play. DX7 Pro+ uses 2nd generation 8 core XMOS XU208, USB supports up to PCM32bit768kHz and DSD513 native.
- Sound Simulation According to the unique harmonic performance of tubes and transistors, we added the sound simulation function of tubes and transistors to the DX7 Pro+, so that you can hear 4 different performances.
- See more on Amazon...
Brand: KGUSS | Manufacturer: KGUSS
Dimensions: 0.50 x 1.18 x 1.57 Inches
See On Amazon #8
Topping D90 III Sabre MQA Full Balance HiFi DAC Bluetooth 5.1 ES9039SPROx2 DSD512 PCM32bit/768kHz USB/Coax/Opt/AES/IIS Desktop Audio Preamp (Black)
Asin: B0CQJVDTRH | Model: TOPPING D90 III SABRE | PartNumber: TOPPING D90 III SABRE
Brand New I/V Conversion - A Brand New I/V Conversion Circuit Is Designed For Better Quality Audio Reproduction. The New Circuit Design Provides Lower Distortion And Lower Noise While Occupying Less Space. The New Circuit Is Pushed Close To The Limit Of Physics So That We Are Able To Squeeze Out The Last Bit Of Performance Of The Dac Chip..
Universal Compatibility And Ease Of Use - The D90 Iii Is A Breeze To Use With Its Wide Compatibility Range. It Supports Various Operating Systems Like Windows, Mac, Linux, And Ios/Android. For Windows Asio, A Simple Driver Setup Is All It Takes. The Device's Usb Hardware Is Based On Xmos Xu316 And Thesycon Drivers, Ensuring Stability And Reliability..
Ldac Wireless Available - D90 Iii Sabre Is Equipped With Qcc5125 And Bluetooth 5.1, Supports Ldac/Aptx-Adaptive/Aptx-Hd/Aac/Sbc. It Can Support Up To 96Khz/24Bit, So That High-Quality Audio Can Be Transmitted Wirelessly To Obtain Music Experience Beyond Cd Level..
Advanced Cpld Processing - We Achieved Incredible Jitter Rejection Using Cpld To Process The Clock Signal And Optimize The Digital Signal.Regardless Of Usb, Optical, Coaxial, Aes Input, Jitter Is As Low As -160Db..
Features
- Two ES9039SPRO chips - Each of the left and right audio channels independently utilizes an ES9039SPRO, providing higher SNR (135dB) , greater dynamic range, and lower distortion (<0.000045% THD+N) compared to the D90SE. Clearer details flow into your ears.
- Advanced CPLD processing - We achieved incredible jitter rejection using CPLD to process the clock signal and optimize the digital signal.Regardless of USB, optical, coaxial, AES input, jitter is as low as -160dB.
- Brand new I/V conversion - A brand new I/V conversion circuit is designed for better quality audio reproduction. The new circuit design provides lower distortion and lower noise while occupying less space. The new circuit is pushed close to the limit of physics so that we are able to squeeze out the last bit of performance of the DAC chip.
- LDAC wireless available - D90 III SABRE is equipped with QCC5125 and Bluetooth 5.1, supports LDAC/aptX-Adaptive/aptX-HD/AAC/SBC. It can support up to 96kHz/24bit, so that high-quality audio can be transmitted wirelessly to obtain music experience beyond CD level.
- Universal compatibility and ease of use - The D90 III is a breeze to use with its wide compatibility range. It supports various operating systems like Windows, Mac, Linux, and iOS/Android. For Windows ASIO, a simple driver setup is all it takes. The device's USB hardware is based on XMOS XU316 and Thesycon drivers, ensuring stability and reliability.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
Dimensions: 1.77 x 9.06 x 6.30 Inches
See On Amazon #9
Topping D10 Balanced USB DAC ES9038Q2M XMOS XU208 PCM384kHz DSD256 HiFi DAC Decoder (Silver)
Asin: B099WMWDSL | Model: D10 Balanced | PartNumber: D10 Balanced
D10 Balanced Will Synchronously Power On/Off With Pc..
D10 Balanced Can Accurately Indicate The Audio Format (Pcm Or Dsd) And Sampling Rate Of The Playing Music. Orange Led Is Soft And Not Dazzling Even At Night..
D10 Balanced Supports Professional Asio Applications. When Using Asio In Mac Or Liunx, It Can Be Set In The Music Playback Software; When Using Asio With Windows, You Can Use The Customized Driver From Thesycon..
D10 Balanced Is Compatible With 16-32Bit/44.1-384Khz And Dsd64-Dsd256 Native.
Features
- You can connect D10 Balanced to your amplifier/headphone amplifir's input to make D10 Balanced one part of your HIFI system. D10 Balanced will greatly improve sound quality in case playing high resolution files.
- D10 Balanced is compatible with 16-32bit/44.1-384kHz and DSD64-DSD256 Native
- D10 Balanced will synchronously power on/off with PC.
- D10 Balanced supports professional ASIO applications. When using ASIO in MAC or Liunx, it can be set in the music playback software; when using ASIO with Windows, you can use the customized driver from Thesycon.
- D10 Balanced can accurately indicate the audio format (PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not dazzling even at night.
- See more on Amazon...
Brand: Fanmusic | Manufacturer: TOPPING
Weight: 1.32 Pounds
See On Amazon #10
Topping DX5 Lite DAC Headphone Amp Full Balanced Audio Decoder ES9068AS*2 Chip NFCA USB/Optical/Coaxial Bluetooth LDAC XLR/RCA Output Headphone Amplifier(Black)
Asin: B0BY22VDDX | Model: DX5-LITE-Black | PartNumber: DX5-LITE-Black
👍 Ldac 24Bit 96Khz Bluetooth Transmission ▶️ Topping Dx5 Lite Has The Certification Of Hi-Res Audio Wireless And Ldac. It Uses Newest Qcc5125 Chipset To Support Ldac/Aac/Sbc/Aptx/Aptx Ll/Aptx Hd Protocol. The Qcc5125 Dac Connects The Digital Signal To The 2Xes9068as For Decoding..
👍 Multiple Output Mode ▶️ Adapt To Different Usage Scenarios, Topping Dx5 Lite Has 4 Output Mode: Headphone Amp / Headphone Amp&Line Out / Dac / Pre-Amplifier..
👍 Built-In Nfca Headphone Amplifier ▶️ The New Topping Dx5 Lite Has The Nfca Circuit Optimized For This Unit, Giving The Ultra Low Noise And Distortion. It Pairs With High Sensitivity Iems And Power Hungry High Impedance Headphones Nicely..
👍 2 * Es9068as Dac Chip ▶️ With Careful Engineering And Attention To Detail Of The External Engineering Team, 0.00009% Thd + N Can Be Achieved With 2 X Es9068as. This Gives You Untouched Sound Quality..
Features
- One For All USB input can be connected to a PC,or OTG to mobile phone and tablet. Bluetooth input supports SONY LDAC high-resolution audio,and wireless input liberates the audio source and facilitates use, Coaxial input +optical input can be connected to audio sources such as DVD players, digital broadcasting,TVset-top boxes, game consoles, eto.
- 2 * ES9068AS DAC Chip With careful engineering and attention to detail of the external engineering team, 0.00009% THD + N can be achieved with 2 x ES9068AS. This gives you untouched sound quality.
- LDAC 24bit 96kHz Bluetooth transmission TOPPING DX5 Lite has the certification of Hi-Res Audio Wireless and LDAC. It uses newest QCC5125 chipset to support LDAC/AAC/SBC/APTX/APTX LL/APTX HD protocol. The QCC5125 DAC connects the digital signal to the 2xES9068AS for decoding.
- Built-in NFCA headphone amplifier The new TOPPING DX5 Lite has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion. It pairs with high sensitivity IEMS and power hungry high impedance headphones nicely.
- Multiple Output Mode Adapt to different usage scenarios, TOPPING DX5 Lite has 4 output mode: Headphone Amp / Headphone Amp&Line out / DAC / Pre-amplifier.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
Warranty: One year free repair
See On Amazon #11
Topping DX5 MQA DAC Headphone Amp Full Balanced Audio Decoder ES9068AS*2 Chip NFCA USB/Optical/Coaxial Full MQA Decoding DA Converter Bluetooth LDAC XLR/RCA Output Headphone Amplifier (Black)
Asin: B09WTQWL8J | Model: DX5 | PartNumber: DX5
▶ Ldac 24Bit 96Khz Bluetooth Transmission▶ Dx5 Has The Certification Of Hi-Res Audio Wireless And Ldac.It Uses Newest Qcc5125 Chipset To Support Ldac/Aac/Sbc/Aptx/Aptx Ll/Aptx Hd Protocol.The Qcc5125 Dac Connects The Digital Signal To The 2Xes9068as For Decoding..
▶ Multiple Output Mode▶ Adapt To Different Usage Scenarios, Dx5 Has 4 Output Mode: Headphone Amp / Headphone Amp&Line Out / Dac / Pre-Amplifier..
▶ Built-In Nfca Headphone Amplifier▶ The New Dx5 Has The Nfca Circuit Optimized For This Unit, Giving The Ultra Low Noise And Distortion. It Pairs With High Sensitivity Iems And Power Hungry High Impedance Headphones Nicely..
▶ 2 * Es9068as Dac Chip▶ With Careful Engineering And Attention To Detail Of The External Engineering Team, 0.00009% Thd + N Can Be Achieved With 2 X Es9068as. This Gives You Untouched Sound Quality..
Features
- One For All USB input can be connected to a PC,or OTG to mobile phone and tablet. Bluetooth input supports SONY LDAC high-resolution audio,and wireless input liberates the audio source and facilitates use, Coaxial input +optical input can be connected to audio sources such as DVD players, digital broadcasting,TVset-top boxes, game consoles, eto.
- 2 * ES9068AS DAC Chip With careful engineering and attention to detail of the external engineering team, 0.00009% THD + N can be achieved with 2 x ES9068AS. This gives you untouched sound quality.
- LDAC 24bit 96kHz Bluetooth transmission DX5 has the certification of Hi-Res Audio Wireless and LDAC.It uses newest QCC5125 chipset to support LDAC/AAC/SBC/APTX/APTX LL/APTX HD protocol.The QCC5125 DAC connects the digital signal to the 2xES9068AS for decoding.
- Built-in NFCA headphone amplifier The new DX5 has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion. It pairs with high sensitivity IEMS and power hungry high impedance headphones nicely.
- Multiple Output Mode Adapt to different usage scenarios, DX5 has 4 output mode: Headphone Amp / Headphone Amp&Line out / DAC / Pre-amplifier.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
Warranty: One year free repair
See On Amazon #12
Topping D70 Pro OCTO DAC - 8X CS43198 Bluetooth 5.1 LDAC Aurora UI Colour Display RCA & XLR Output HiFi Decoder with Remote Control (Silver)
Asin: B0CGCMGGBJ | Model: D70 Pro OCTO-Sliver | PartNumber: D70 Pro OCTO-Sliver
👍 Plug And Play ▶️ Compatibility Is King, And The D70 Pro Octo Knows It. Use It Immediately On Windows 10, Windows 11, Mac, Linux, Ios/Android, And More. And For Windows Users Who Need Asio Applications, The Stable And Reliable Xmos Xu316 And Thesycon Custom Driver Make Setup A Breeze..
👍 Integrated Preamp With Independent Volume Memory ▶️ In Addition To Its Dac Prowess, The D70 Pro Octo Also Serves As An Integrated Preamp. Adjust Volume And Output Directly To Power Amplifiers Or Active Speakers. With Independent Volume Memory For Different Modes, You'll Always Return To Your Last-Used Volume Setting..
👍 Freely Switch Output Modes ▶️ Whether You Need Rca Single-Ended Output, Xlr Balanced Output, Or Both, The D70 Pro Octo Has You Covered. Freely Switch Between Output Modes To Adapt To Different Devices And Performance Needs. It's All About Giving You More Possibilities And Convenience..
👍 Aurora Ui Bring New Experience ▶️ The Full-Color Screen And Three Touch Buttons Of The D70 Pro Octo Introduce A Refreshing Ui Experience. Whether You're Toggling Playback Information, Fft, Or Vu, The Vibrant Colors Pull You In, Creating A Customizable Visual Delight..
Features
- 8-core driver for unmatched detail The D70 Pro OCTO is equipped with 8 Cirrus Logic flagship chips CS43198. The D70 Pro OCTO also supports up to PCM768kHz/32bit and DSD512 audio decoding, which letting you experience audio with unparalleled detail and fidelity. Even the subtlest nuances come alive, creating a listening experience that's true to the original recording.
- Aurora UI bring new experience The full-color screen and three touch buttons of the D70 Pro OCTO introduce a refreshing UI experience. Whether you're toggling playback information, FFT, or VU, the vibrant colors pull you in, creating a customizable visual delight.
- Plug and play Compatibility is king, and the D70 Pro OCTO knows it. Use it immediately on Windows 10, Windows 11, MAC, Linux, iOS/Android, and more. And for Windows users who need ASIO applications, the stable and reliable XMOS XU316 and Thesycon custom driver make setup a breeze.
- Freely switch output modes Whether you need RCA single-ended output, XLR balanced output, or both, the D70 Pro OCTO has you covered. Freely switch between output modes to adapt to different devices and performance needs. It's all about giving you more possibilities and convenience.
- Integrated preamp with independent volume memory In addition to its DAC prowess, the D70 Pro OCTO also serves as an integrated preamp. Adjust volume and output directly to power amplifiers or active speakers. With independent volume memory for different modes, you'll always return to your last-used volume setting.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
See On Amazon #13
Topping D70 Pro Sabre ES9039SPro Fully Balanced DAC, Bluetooth 5.1 Wireless Audio DAC, USB/AES/BT5.1/Optical/Coaxial Input, XLR/RCA Audio DAC, Home Audio DA Converters with Remote Control (Black)
Asin: B0C89DVVCL | Model: D70Pro SE 黒 | PartNumber: D70Pro SE 黒
Aurora Ui For An Enhanced Experience : The D70 Pro Sabre Features A Full-Color Display With An Intuitive Aurora Ui. Its Three Touch Buttons Allow For Easy Navigation And Customization Of Playback Information, Including Fft And Vu Displays, According To Your Preferences..
Wide Compatibility And Plug-And-Play : The D70 Pro Sabre Is Compatible With Various Operating Systems, Including Windows 10, Windows 11, Etc. Simply Connect It To Your Audio Source And Start Enjoying Improved Sound Quality. It Offers Plug-And-Play Functionality, With Driver Installation And Setup Required Only For Asio Applications On Windows Systems..
If You Have Any Questions During Use, Aoshida Will Quickly Guide You To Solve Them..
Bluetooth 5.1 Transmission : Enjoy Wireless High-Quality Audio With The D70 Pro Sabre's Support For Ldac, Aptx-Adaptive, Aptx Hd, Aptx, Aac, And Sbc Audio Encoding. This Enables Wireless Transmission Of Audio From Compatible Devices For A Superior Sound Experience..
New I/V Conversion : Experience Higher Quality Audio Playback With The D70 Pro Sabre's New I/V Conversion Circuitry. It Utilizes An Exclusive Design That Minimizes Distortion And Noise, Providing Superior Sound While Occupying Less Space..
Features
- Powerful Performance : TOPPING D70 Pro SABRE DAC adopts the powerful ES9039SPRO chipset, offering exceptional 32-bit audio resolution and delivering a stable and powerful performance for an immersive listening experience.
- New I/V Conversion : Experience higher quality audio playback with the D70 Pro SABRE's new I/V conversion circuitry. It utilizes an exclusive design that minimizes distortion and noise, providing superior sound while occupying less space.
- Aurora UI for an Enhanced Experience : The D70 Pro SABRE features a full-color display with an intuitive Aurora UI. Its three touch buttons allow for easy navigation and customization of playback information, including FFT and VU displays, according to your preferences.
- Bluetooth 5.1 Transmission : Enjoy wireless high-quality audio with the D70 Pro SABRE's support for LDAC, aptX-Adaptive, aptX HD, aptX, AAC, and SBC audio encoding. This enables wireless transmission of audio from compatible devices for a superior sound experience.
- Wide Compatibility and Plug-and-Play : The D70 Pro SABRE is compatible with various operating systems, including Windows 10, Windows 11, etc. Simply connect it to your audio source and start enjoying improved sound quality. It offers plug-and-play functionality, with driver installation and setup required only for ASIO applications on Windows systems.
- If you have any questions during use, AOSHIDA will quickly guide you to solve them.
- See more on Amazon...
Brand: AOSHIDA | Manufacturer: TOPPING
Dimensions: 1.89 x 8.74 x 6.93 Inches
See On Amazon #14
Fanmusic Topping DX5 MQA Full Decoder ES9068AS*2 Chip NFCA LDAC USB DAC DSD512 PCM768kHz XU216 RAC XLR 6.35mm Headphone Amplifier (Black)
Asin: B09WHM9V1J | Model: DX5 | PartNumber: DX5
● Ldac 24Bit 96Khz Bluetooth Transmission: Dx5 Is Hi-Res Audio Wireless And Ldac Certified And Supports Ldac / Aac / Sbc / Aptxiaptx Laptx Hd Protocol Using The Latest Qcc5125 Chipset. The Qcc5125 Dac Connects The Digital Signal To The 2Xes9068as For Decoding..
● Multi-Output Mode: Dx5 Has Four Output Modes: "Headphone Amplifier", "Headphone Amplifier + Line Output", "Dac", And "Preamplifier"..
● Built-In Nfca Headphone Amplifier: The New Dx5 Is Equipped With An Nfca Circuit Optimized For This Unit, Achieving Ultra-Low Noise And Distortion. Pairs Well With High-Sensitivity Iems And High-Impedance Headphones That Consume Large Amounts Of Power..
● Plug And Play To Turn Your Pc Into A Hifi Source: Dx5 Has A Wide Range Of Compatibility: Plug And Play. Dx5 Uses 2Nd Generation 16-Core Xmos Xu216 And Usb Supports Up To Pcm 32Bit 768Khz, Dsd512 Native And Mqa Full Decoding..
Features
- 2 * ES9068AS DAC Chip: With careful engineering and attention to detail of the external engineering team, 0.00009% THD + N can be achieved with 2 x ES9068AS. This gives you untouched sound quality.
- Plug and play to turn your PC into a HIFI source: DX5 has a wide range of compatibility: plug and play. DX5 uses 2nd generation 16-core XMOS XU216 and USB supports up to PCM 32bit 768kHz, DSD512 native and MQA full decoding.
- LDAC 24bit 96kHz Bluetooth transmission: DX5 is Hi-Res Audio Wireless and LDAC certified and supports LDAC / AAC / SBC / APTXIAPTX LAPTX HD protocol using the latest QCC5125 chipset. The QCC5125 DAC connects the digital signal to the 2xES9068AS for decoding.
- Built-in NFCA headphone amplifier: The new DX5 is equipped with an NFCA circuit optimized for this unit, achieving ultra-low noise and distortion. Pairs well with high-sensitivity IEMs and high-impedance headphones that consume large amounts of power.
- Multi-output mode: DX5 has four output modes: headphone amplifier, headphone amplifier + line output, DAC, and preamplifier.
- See more on Amazon...
Brand: Fanmusic | Manufacturer: TOPPING
Dimensions: 0.04 x 6.69 x 2.05 inches
See On Amazon #15
Topping DX1 Decoder AK4493S XU208 DAC&Headphone Amplifier Support up to DSD256 PCM384 Mini DAC(Silver)
Asin: B0BFVV83NC | Model: TOPPING DX1 | PartNumber: TOPPING DX1
No Adapter Required: Like Other Usb Device, The Dx1 Does Not Require An Additional Adapter For Power Supply. Only One Usb Cable Can Complete The Power Supply And Data Transmission..
Excellent Enough For Serving As A Pure Dac: Dx1 Has Line Out With Fixed Volume, Which Can Be Used As A Pure Dac With Headphone Amplifiers, Power Amplifiers And Other Equipment..
Powerful Output In A Small Hummingbird Size : In Such A Tiny Size, Dx1 Can Provide A Maximum Output Of 280Mw X2 Without Additional Power Supply..
Plug And Play: Turn Your Pc Into A Hifi Source Dx1 Has A Wide Range Of Compatibility: Windows 10, Windows 11, Mac, Linux, I0s, Android Can Be Plug And Play. Only For Windows Asio Applications, You Need To Install The Driver And Set It Up. The Usb Hardware Is Based On Xmos Xu208 And Thesycon Custom Driver (Applicable To Windows, Other Systems Are Free Of Driver), Which Is Stable And Reliable..
Features
- AK4493S: The DX1 uses newest sub-filagship AK4493S chips of AKM'S VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493.
- Plug and play: turn your PC into a HIFI source DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, I0S, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable.
- No adapter required: Like other USB device, the DX1 does not require an additional adapter for power supply. Only one USB cable can complete the power supply and data transmission.
- Powerful output in a small hummingbird size : In such a tiny size, DX1 can provide a maximum output of 280mW x2 without additional power supply.
- Excellent enough for serving as a pure DAC: DX1 has Line out with fixed volume, which can be used as a pure DAC with headphone amplifiers, power amplifiers and other equipment.
- See more on Amazon...
Brand: Fanmusic | Manufacturer: TOPPING
Dimensions: 0.04 x 3.94 x 3.86 Inches
See On Amazon #16
Topping D70PRO Sabre DAC ES9039SPRO XU316 Bluetooth 5.1 LDAC Aurora UI Colour Display RCA & XLR Output HiFi Decoder with Remote Control(Black)
Asin: B0C4PM29NJ | Model: TP-D70 Pro SABRE-Black | PartNumber: TP-D70 Pro SABRE-Black
👍 Freely Switch Output Modes ▶️ The D70 Pro Sabre Features The Versatile Rca Single-Ended Output And The Professional Xlr Balanced Output. You Can Turn On Only The Desired Output Channel, Or Both Outputs At The Sametime. Whether You Are Connecting Two Different Systems Or In A Situation Where You Need To Output Two Audio Signals At The Same Time, The D70 Pro Sabre Provides You With A More Convenient And Efficient Way To Output..
👍 Best Match—A70 Pro ▶️ A70 Pro And D70 Pro Sabre Have Identical Design Languages And Can Meet The Needs Of The Vast Majority Of Headphones And Active Speakers. The A70 Pro And D70 Pro Sabre Can Be Switched On And Off In Conjunction Via The 12V Trigger Connector, Allowing The A70 Pro To Be Synchronized With The D70 Pro Sabre For Automatic Or Manual Switching..
👍 Integrated Preamp Function ▶️ In Addition To The Fixed Output Level Dac Mode, The D70 Pro Sabre Also Has A "Preamp" Mode. In This Mode, The D70 Pro Sabre Can Adjust The Volume And Output Directly To The Power Amplifier Or Active Speakers..
👍 Aurora Ul ▶️ Full Color Screen And Three Touch Buttons Bring New Experience. The Display Of The Playback Information, Fft, Vu Can Be Switched According To Your Requirements..
Features
- Flagship performance The D70 Pro SABRE adopts the ES9039SPRO, the flagship 32-bit DAC chip of SABRE redesigned by ESS company. New IV conversion circuitry is designed to give you higher quality audio playback. Bluetooth 5.1 supports LDAC / aptX-Adaptive / aptX HD /aptx / AAC / SBC audio encoding, allowing high quality audio to be transmitted wirelessly for a better sound experience.
- Aurora Ul Full color screen and three touch buttons bring new experience. The display of the playback information, FFT, VU can be switched according to your requirements.
- Freely switch output modes The D70 Pro SABRE features the versatile RCA single-ended output and the professional XLR balanced output. You can turn on only the desired output channel, or both outputs at the sametime. Whether you are connecting two different systems or in a situation where you need to output two audio signals at the same time, the D70 Pro SABRE provides you with a more convenient and efficient way to output.
- Integrated preamp function In addition to the fixed output level DAC mode, the D70 Pro SABRE also has a preamp mode. In this mode, the D70 Pro SABRE can adjust the volume and output directly to the power amplifier or active speakers.
- Best match A70 Pro A70 Pro and D70 Pro SABRE have identical design languages and can meet the needs of the vast majority of headphones and active speakers. The A70 Pro and D70 Pro SABRE can be switched on and off in conjunction via the 12V Trigger connector, allowing the A70 Pro to be synchronized with the D70 Pro SABRE for automatic or manual switching.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
See On Amazon #17
Topping DX1 Decoder AK4493S XU208 DAC&Headphone Amplifier Support up to DSD256 PCM384 Mini DAC(Black)
Asin: B0BFLCJB5H | Model: DX1 | PartNumber: DX1
No Adapter Required: Like Other Usb Device, The Dx1 Does Not Require An Additional Adapter For Power Supply. Only One Usb Cable Can Complete The Power Supply And Data Transmission..
Powerful Output In A Small Hummingbird Size : In Such A Tiny Size, Dx1 Can Provide A Maximum Output Of 280Mw X2 Without Additional Power Supply..
Discrete Lnrd: How To Solve The Noise Problem From Usb Power? The Dx1's Answer Is The Discrete Lnrd Circuit (Low Noise Reference Driver). The Discrete Lnrd Circuit Filters Out The Noise And Interference Of Usb 5V Power And Provides Stable And Clean Power Supply Of Ultra-Low Noise Reference Level For Dx1. With This Technology, The Noise Of Dac Part Is Lower Than 2.0Uv, And The Noise Of Amp Part Is Lower Than1 .0Uv. Even High Sensitive Iems Will Not Bothered By Noise..
Plug And Play: Turn Your Pc Into A Hifi Source Dx1 Has A Wide Range Of Compatibility: Windows 10, Windows 11, Mac, Linux, I0s, Android Can Be Plug And Play. Only For Windows Asio Applications, You Need To Install The Driver And Set It Up. The Usb Hardware Is Based On Xmos Xu208 And Thesycon Custom Driver (Applicable To Windows, Other Systems Are Free Of Driver), Which Is Stable And Reliable..
Features
- AK4493S: The DX1 uses newest sub-filagship AK4493S chips of AKM'S VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493.
- Plug and play: turn your PC into a HIFI source DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, I0S, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable.
- No adapter required: Like other USB device, the DX1 does not require an additional adapter for power supply. Only one USB cable can complete the power supply and data transmission.
- Discrete LNRD: How to solve the noise problem from USB power? The DX1's answer is the Discrete LNRD circuit (low noise reference driver). The Discrete LNRD circuit filters out the noise and interference of USB 5V power and provides stable and clean power supply of ultra-low noise reference level for DX1. With this technology, the noise of DAC part is lower than 2.0uV, and the noise of AMP part is lower than1 .0uV. Even high sensitive IEMs will not bothered by noise.
- Powerful output in a small hummingbird size : In such a tiny size, DX1 can provide a maximum output of 280mW x2 without additional power supply.
- See more on Amazon...
Brand: Fanmusic | Manufacturer: TOPPING
See On Amazon #18
LEAUDIO Topping RC22 Remote Control for Topping DX3 PRO+/EX5/D90SE/D70S/E30/E50/D50S/D30 PRO
Asin: B0CT5KHJG1
Features
- RC22 can work with: D30 pro, D50S, D70, D70s, D90, D90SE, DX3, DX3 pro, DX3 pro+, DX7, DX7 pro, DX7s, E30, E50, EX5, DX5, DM7, D90LE
- See more on Amazon...
Brand: LEAUDIO | Manufacturer: LEAUDIO
See On Amazon #19
Topping EX5 MQA Dual ES9038Q2M DAC Bluetooth 5.0 LDAC DSD512 PCM 768kHz Hi-Res Audio HiFi Decoder Headphone Amplifier (Silver)
Asin: B0987SVC2L
2Nd Generation 16 Core Xmos Xu216, 4-Pin-Xlr And 6.35Mm Headphone Output.
Dac + Pre Amp Applicaion/ Bluetooth Receiver/Tablet And Phone Dac Application.
Thd+N As Low As 0.00010%, 1300Mw X2 Output Power.
Support Dsd512 Native And Pcm 768Khz, Mqa Full Decoding Via Usb.
Features
- Dual ESS ES9038Q2M SABRE HIFI DAC Chips, MQA Full Decoding via USB
- Support DSD512 Native and PCM 768kHz, MQA Full Decoding via USB
- 2nd Generation 16 Core XMOS XU216, 4-PIN-XLR and 6.35mm Headphone Output
- THD+N as low as 0.00010%, 1300mW X2 Output Power
- DAC + Pre amp applicaion/ Bluetooth receiver/Tablet and phone DAC application
- See more on Amazon...
Brand: Fanmusic | Manufacturer: TOPPING
See On Amazon
Looking For Something Else?
Search