VIPIH Pinion Flange Holding Tool Holder Yoke Wrench Ring Rear End Axle Nut for Ford 7.5", 8", 8.8", 9", 9.75", IRS and straight, for Toyota 7.5" and 8", for Dana AMC 20, 35, 44, 50, 60, 70, 80
Asin: B09TRH5TLZ
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Fit For Chrysler 7.25", 8.25", 9.25". 1310 1330 1350 Yuk..
Fit For Toyota 7.5" And 8".
Fit For General Motors 7.5", 8.5", 10.5", 11.5", 8.2", 9.25", 9.5".
Fit For Dana Amc 20, 35, 44, 50, 60, 70, 80.
Features
- Fit for Ford 7.5", 8", 8.8", 9", 9.75", IRS and straight
- Fit for Dana AMC 20, 35, 44, 50, 60, 70, 80
- Fit for Chrysler 7.25, 8.25, 9.25. 1310 1330 1350 Yuk.
- Fit for General Motors 7.5, 8.5, 10.5, 11.5, 8.2, 9.25, 9.5
- Fit for Toyota 7.5 and 8
- See more on Amazon...
Brand: VIPIH | Manufacturer: VIPIH
Dimensions: 0.75 x 6.69 x 5.91 Inches
See On Amazon Similar To VIPIH Pinion Flange Holding Tool
#1
Mission Automotive Stainless Steel Pinion Yoke Wrench Tool Extra Strength Puller for Loosening Pinion Flange & Nuts Extra 1/2" Hole that Fits Most Sockets Works with Various Style Yokes,Flanges/Axles
Asin: B08MTDB8Z6 | Model: 5257 | PartNumber: 5257 | Ean: 0850020755257 | UPC: 850020755257
Holds The Yoke In Place -- Use The Pinion Wrench While Applying Torque. It Will Help You Loosen Even The Most Stubborn Pinion Nuts. For Leverage, Grab A 1/2โ Breaker Bar Or 3/4โ Drive Tool.
Additional 1/2" Square Socket -- Other Yoke Flange Wrenches Only Have One And Round Out Over Time. The Problem Is, For Tight Spaces, You Might Need Multiple. To Address This, We Added An Extra 1/2" Square Socket. Plus, Our Stainless Steel Will Prevent Any Rounding. You'll Be Able To Utilize Your Pinion Depth Setting Tool For Years.
Tighten Up -- Use The Pinion Flange Tool With A Torque Wrench To Tighten Retaining Bolts And Nuts. Or For Setting The Bearing Pre-Load. It Can Also Handle Other High Torque Tasks, Like Crush Sleeves.
Compatible With -- Our Pinion Yoke Wrench Is Compatible With Most Ford, Amc, Dana, And Gm Yokes. Fits Almost All Pinion And Companion Flanges. There Are Multiple Slotted Bolt Patterns For 1/4", 5/16" And 3/8" Fasteners. The Center Socket Hole Is 2".
Features
- Extra Strength -- Instead of soft carbon steel that strips out easily, we crafted our flange wrench with Stainless Steel. Utilize this tool to handle the insane amount of torque needed to get the job done
- Compatible With -- Our pinion yoke wrench is compatible with most Ford, AMC, Dana, and GM yokes. Fits almost all pinion and companion flanges. There are multiple slotted bolt patterns for 1/4, 5/16 and 3/8 fasteners. The center socket hole is 2
- Holds The Yoke In Place -- Use the pinion wrench while applying torque. It will help you loosen even the most stubborn pinion nuts. For leverage, grab a 1/2 breaker bar or 3/4 drive tool
- Tighten Up -- Use the pinion flange tool with a torque wrench to tighten retaining bolts and nuts. Or for setting the bearing pre-load. It can also handle other high torque tasks, like crush sleeves
- Additional 1/2 Square Socket -- Other yoke flange wrenches only have one and round out over time. The problem is, for tight spaces, you might need multiple. To address this, we added an extra 1/2 square socket. Plus, our stainless steel will prevent any rounding. You'll be able to utilize your pinion depth setting tool for years
- See more on Amazon...
Brand: Mission Automotive | Manufacturer: Mission Automotive
See On Amazon #2
Sporthfish Stainless Steel Pinion Yoke Wrench Tool,Suitable for Various Styles of Yokes,Axles,Flanges;Fits for Most Sockets Extra 1/2" Hole;Strength Puller Suitable for loosening nuts flanges
Asin: B095SGS3FC | Model: AVOMARR-002 | PartNumber: AVOMARR-002 | Ean: 6215090058914
ใMaterialใ: Made Of High Quality Stainless Steel, Which Is Not Easy To Peel Off, And It Has A High Strength Characteristy. You Can Use This Tool To Handle The Crazy Torque Required To Get Your Job Done..
ใFunctionใ: Use A Pinion Wrench While Applying Torque. It Can Even Help You Loosen The Most Stubborn Pinion Nut. Use A Pinion Flange Tool With A Torque Wrench To Tighten The Fixing Bolts And Nuts. Or Used To Set The Bearing Preload. It Can Also Handle Other High-Torque Tasks, Such As Squeezing Sleeves..
ใSophisticated Designใ: Usually The Yoke Flange Wrench Has Only One 1/2" Square Socket, But We Consider That You May Need To Use More Than One In The Work, So We Have Added An Additional 1/2" Square Socket. Plus, Our Stainless Steel Material Allows You To Use This Tool For Many Years..
ใSizeใ: There Are A Variety Of Slotted Bolt Styles For 1/4", 5/16" And 3/8" Fasteners. Center Socket Hole Is 2". ("More Size Information Please Refer To Our Second Picture.").
Features
- Fitment : Compatible with most Ford, Dana, AMC and GM yokes. Suitable for almost all pinion gears and companion flanges.
- Size : There are a variety of slotted bolt styles for 1/4, 5/16 and 3/8 fasteners. Center socket hole is 2. (More Size Information Please Refer to Our Second Picture.)
- Material : Made of high quality stainless steel, which is not easy to peel off, and it has a high strength characteristy. You can use this tool to handle the crazy torque required to get your job done.
- Sophisticated Design : Usually the yoke flange wrench has only one 1/2 square socket, but we consider that you may need to use more than one in the work, so we have added an additional 1/2 square socket. Plus, our stainless steel material allows you to use this tool for many years.
- Function : Use a pinion wrench while applying torque. It can even help you loosen the most stubborn pinion nut. Use a pinion flange tool with a torque wrench to tighten the fixing bolts and nuts. Or used to set the bearing preload. It can also handle other high-torque tasks, such as squeezing sleeves.
- See more on Amazon...
Brand: Sporthfish | Manufacturer: AVOMARR
See On Amazon #3
Lkonwee Stainless Steel Pinion Yoke Wrench Tool - Extra Strength Puller for Loosening Pinion Flange and Nuts that Fits Most Sockets - Works with Various Style Yokes, Flanges, or Axles
Asin: B092V3Q5J4 | Ean: 0770619593278 | UPC: 770619593278
Holds The Yoke In Place -- Use The Pinion Wrench While Applying Torque. It Will Help You Loosen Even The Most Stubborn Pinion Nuts. For Leverage, Grab A 1/2โ Breaker Bar Or 3/4โ Drive Tool.
Is Stainless Steel To Handle Very High Torque -Holds A Sturdy Shape.
Simple Operation For Installation And Removal Of Pinion Yoke.
Tighten Up -- Use The Pinion Flange Tool With A Torque Wrench To Tighten Retaining Bolts And Nuts. Or For Setting The Bearing Pre-Load. It Can Also Handle Other High Torque Tasks, Like Crush Sleeves.
Features
- Compatible With -- Our pinion yoke wrench is compatible with most Ford, AMC, Dana, and GM yokes. Fits almost all pinion and companion flanges. There are multiple slotted bolt patterns for 1/4", 5/16" and 3/8" fasteners.
- Tighten Up -- Use the pinion flange tool with a torque wrench to tighten retaining bolts and nuts. Or for setting the bearing pre-load. It can also handle other high torque tasks, like crush sleeves
- Holds The Yoke In Place -- Use the pinion wrench while applying torque. It will help you loosen even the most stubborn pinion nuts. For leverage, grab a 1/2 breaker bar or 3/4 drive tool
- SIMPLE OPERATION for installation and removal of pinion yoke
- Is stainless steel to handle very high torque -Holds a sturdy shape
- See more on Amazon...
Brand: Lkonwee | Manufacturer: Lkonwee
Dimensions: 1.00 x 5.00 x 5.00 Inches | Weight: 0.76 pounds
See On Amazon #4
Pinion Yoke Wrench Tool -Stainless Steel Extra Strength Puller for Loosening Pinion Flange and Nuts - Extra 1/2" Hole that Fits Most Sockets
Asin: B096KCW3PT | Ean: 6092529921687
ใFunctionใHolds The Yoke In Place,Use A Pinion Wrench While Applying Torque. It Can Help You Loosen The Most Stubborn Pinion Nut.You Also Can Grasp The 1 / 2 "Circuit Breaker Rod Or 3 / 4" Drive Tool As A Lever To Improve Your Work Efficiency..
ใUpgrade Designใ: Usually The Yoke Flange Wrench Has Only One 1/2" Square Socket, But We Consider That You May Need To Use More Than One During The Work, So We Have Added An Additional 1/2" Square Socket. Plus, Our Stainless Steel Material Allows You To Use This Tool For Many Years..
ใMaterialใMade Of High Quality Stainless Steel, It Can Handle Very High Torque Needed .Compare With Soft Carbon Steel ,This Flange Wrench Not Easy To Bend ,Holds A Original Shape..
ใApplicable SizeใThere Are A Variety Of Slotted Bolt Styles For 1/4", 5/16" And 3/8" Fasteners. The Center Socket Hole Is 2"..
Features
- Compatible with Suitable for most most Ford, Dana, AMC and GM yokes. Fits for almost all pinion and companion flanges.
- Applicable size There are a variety of slotted bolt styles for 1/4, 5/16 and 3/8 fasteners. The center socket hole is 2.
- Function Holds the yoke in place,Use a pinion wrench while applying torque. It can help you loosen the most stubborn pinion nut.you also can grasp the 1 / 2 circuit breaker rod or 3 / 4 drive tool as a lever to improve your work efficiency.
- Material Made of high quality stainless steel, it can handle very high torque needed .Compare with soft carbon steel ,this flange wrench not easy to bend ,holds a original shape.
- Upgrade Design : Usually the yoke flange wrench has only one 1/2 square socket, but we consider that you may need to use more than one during the work, so we have added an additional 1/2 square socket. Plus, our stainless steel material allows you to use this tool for many years.
- See more on Amazon...
Brand: YANWEN | Manufacturer: Topexam
Dimensions: 0.79 x 2.76 x 3.54 Inches | Weight: 0.44 pounds
See On Amazon #5
Pinion Flange Holding Tool Holder Yoke Wrench For Compatible with Jeep Ring Rear End Axle Nut
Asin: B094X364GC
When Removing Or Installing The Nut, The Pinion Over The Shoulder Or Flange Can Be Fixed. These Fasteners Require Huge Torque Values โโAnd Can Easily Bend Inferior Tools..
Package: 1*Yoke Wrench Tool. Having Any Questions, Contact To Us And Got An Ideal Reply Within 12 Hours. With A 180 Days Warranty..
The Large Tools Are Made Of Thick Steel And Cnc Laser Precision Cut. Long-Lasting Rust Resistance..
Install The Ring And Pinion, Or Just Replace/Upgrade The Flange/Yuk. Replace The Leaking Pinion Seal/Washer. Repairing Differentials, Axles And Drive Train Parts. Ensure Longevity And Optimal Performance, Especially When Used In Racing And Off-Road Environments..
Features
- The slot can fits for the most popular fork/flange types. Suitable for many flanges/fork brackets, please check the type before purchasing.
- Install the ring and pinion, or just replace/upgrade the flange/Yuk. Replace the leaking pinion seal/washer. Repairing differentials, axles and drive train parts. Ensure longevity and optimal performance, especially when used in racing and off-road environments.
- When removing or installing the nut, the pinion over the shoulder or flange can be fixed. These fasteners require huge torque values and can easily bend inferior tools.
- The large tools are made of thick steel and CNC laser precision cut. Long-lasting rust resistance.
- Package: 1*Yoke Wrench Tool. Having any questions, contact to us and got an ideal reply within 12 hours. With a 180 days warranty.
- See more on Amazon...
Brand: Bolaxin | Manufacturer: Antozon
See On Amazon #6
Kujunpao Pinion Holding Tool Holder Yoke Wrench Compatible with Various Style Yokes, Flanges, or Axles Fit for Most Sockets extra 1/2" Hole
Asin: B095SLB9PK | Model: Kujunpao-0095 | PartNumber: Kujunpao-0095 | Ean: 6092529923308
The Extra 1 / 2 "Square Socket Helps You Use The Yoke Flange Wrench Tool Many Times In A Compact Space.
Please Check Whether Your Model Is Suitable For Our Products Before Purchase. If There Is Any Problem With Our Products, Please Feel Free To Contact Us, We Will Solve The Problem For You At The First Time And Provide You With The Best After-Sales Service..
A Simple Pinion Wrench Tool Helps You Loosen The Stubborn Pinion Nut. In The Process Of Use, You Can Grasp The 1 / 2 "Circuit Breaker Rod Or 3 / 4" Drive Tool As A Lever To Improve Your Work Efficiency..
Made Of High Quality Stainless Steel. Compared With Ordinary Material Wrench, It Can Be Firmly Fixed In The Required Position Without Bending, Prevent Rounding Over Time, And Provide Huge Torque Value..
Features
- Compatible with most Ford, AMC, Dana, and GM yokes Various Style Yokes, Flanges, or Axles ,work fit for Most Sockets extra 1/2" Hole
- Made of high quality stainless steel. Compared with ordinary material wrench, it can be firmly fixed in the required position without bending, prevent rounding over time, and provide huge torque value.
- The extra 1 / 2 square socket helps you use the yoke flange wrench tool many times in a compact space
- A simple pinion wrench tool helps you loosen the stubborn pinion nut. In the process of use, you can grasp the 1 / 2 circuit breaker rod or 3 / 4 drive tool as a lever to improve your work efficiency.
- Please check whether your model is suitable for our products before purchase. If there is any problem with our products, please feel free to contact us, we will solve the problem for you at the first time and provide you with the best after-sales service.
- See more on Amazon...
Brand: Kujunpao | Manufacturer: Kujunpao
See On Amazon #7
Massive Pinion Flange Holding Tool Holder Yoke Wrench Made USA Compatible with Jeep Ring Rear End Axle Nut Seal 8.8 40 Dana 3/8" THICK!
Asin: B07JGJ2LJ6 | Model: MATO'9524 V.2 | PartNumber: MATO'9524 V.2
Brand: Massive Speed System | Manufacturer: Massive Speed System
Dimensions: 1.00 x 6.00 x 5.00 inches | Weight: 2.00 pounds
See On Amazon #8
ProForm Pinion Depth Setting Tool with Case
Asin: B000630IFI | Model: 66516 | PartNumber: 66516 | Ean: 0037995365166 | UPC: 037995365166
Fit Type: Vehicle Specific.
Country Of Origin : Taiwan.
Package Weight: 2.5 Pounds.
Features
- Package Dimensions: 10.414 H x 23.876 L x 18.541 W (centimetres)
- Package Weight: 2.5 pounds
- Fit type: Vehicle Specific
- Country of Origin : Taiwan
- See more on Amazon...
First Available: 06/05/2012
Brand: ProForm | Manufacturer: Proform
Dimensions: 5.50 x 9.50 x 7.50 Inches | Weight: 0.00 pounds
Warranty: 1 Year
See On Amazon #9
Bentolin Pinion Flange Holding Tool Holder Yoke Wrench Compatible for Jeep Ring Rear End Axle Nut Seal 8.8 40 Dana 3/8 inch Thick
Asin: B094W21GZW | Ean: 6092529922707
ใMaterialใMade Of Huge 3/8 Inch Thick Steel And Laser Cut,This Yoke Wrench Can Handle Huge Torque Values And Can Easily Bend Inferior Tools..
ใPackage Includeใ1Set Pinion Yoke Wrench Tool,If There Is Any Problem With Our Products, Please Contact Us, We Will Solve The Problem For You At The First Time..
ใEasy InstallationใThe Hole Of This Pinion Yoke Wrench Is Over 2" And Fits Most Sockets. You Can Uses A 1/2" Breaker Bar Or A 3/4" Pipe For Leverage..
ใFunctionใFixed The Yoke Over The Shoulder Or Flange When Removing Or Installing The Stubborn Pinion Nut,And For Setting Bearing Pre-Load.It Can Also Handle Other High Torque Tasks, Like Crush Sleeves..
Features
- Suitable For Our pinion flange holding tool is compatible with many style yokes or flanges, axles or transfer cases.There are multiple slotted bolt patterns for 1/4", 5/16" and 3/8" fasteners.
- Function Fixed the yoke over the shoulder or flange when removing or installing the stubborn pinion nut,and for setting bearing pre-load.It can also handle other high torque tasks, like crush sleeves.
- Material Made of huge 3/8 inch thick steel and laser cut,this yoke wrench can handle huge torque values and can easily bend inferior tools.
- Easy Installation The hole of this pinion yoke wrench is over 2 and fits most sockets. you can uses a 1/2 breaker bar or a 3/4 pipe for leverage.
- Package Include 1Set Pinion yoke wrench tool,If there is any problem with our products, please contact us, we Will solve the problem for you at the first time.
- See more on Amazon...
Brand: Bentolin | Manufacturer: AM-World
See On Amazon #10
JEGS Pinion Yoke Wrench | Fits Yokes From 2.75 to 5.25 Wide | 6.5 Long Handle | Made From Heavy Duty Steel
Asin: B078WHRQFR | Ean: 0889944087052 | UPC: 889944087052
Made From Heavy Duty Steel For Long Life.
Simple Operation For Installation And Removal Of Pinion Yoke.
Must Have Tool For Your Rear End And Axle Rebuilding Arsenal.
Wrench Handle Length 6.5 Inches.
Features
- FITS YOKES from 2.75 inches to 5.25 inches wide
- WRENCH HANDLE LENGTH 6.5 inches
- MADE FROM HEAVY DUTY STEEL for long life
- MUST HAVE TOOL for your rear end and axle rebuilding arsenal
- SIMPLE OPERATION for installation and removal of pinion yoke
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 0.40 x 5.60 x 12.80 Inches | Weight: 3.00 pounds
See On Amazon #11
Kujunpao Pinion Flange Holding Tool Holder Yoke Wrench Fit for Jeep Ring Rear End Axle Nut Seal 8.8 40 Dana
Asin: B094VM8D6P | Ean: 6092529923346
Advantage๏ผBig Gear Flange Fixing Tool Bracket Yoke Wrench Can Help You Install Ring Gear Better And Faster Or Replace Leaking Pinion Seal, Improve Your Work Efficiency..
Great Service Support:Please Check Whether Your Model Is Suitable For Our Products Before Purchase. If There Is Any Problem With Our Products, Please Feel Free To Contact Us, We Will Solve The Problem For You At The First Time And Provide You With The Best After-Sales Service..
Package Includes๏ผA Set Of Yoke Wrench For Fixing Tool Bracket Of Big Gear Flange.
Excellent Design๏ผ Made Of High-Quality Solid 3 / 8 "Thick Steel. Compared With The Wrench Made Of Ordinary Materials, It Can Be Firmly Fixed In The Required Position Without Bending, Providing A Huge Torque Value. When Removing Or Installing The Nut, It Can Fix The Pinion Yoke Or Flange In Place.
Features
- Application Work fit for Jeep Ring Rear End Axle Nut Seal 8.8 40 Dana
- Excellent design Made of high-quality solid 3 / 8 thick steel. Compared with the wrench made of ordinary materials, it can be firmly fixed in the required position without bending, providing a huge torque value. When removing or installing the nut, it can fix the pinion yoke or flange in place
- Advantage Big gear flange fixing tool bracket yoke wrench can help you install ring gear better and faster or replace leaking pinion seal, improve your work efficiency.
- Package includes A set of yoke wrench for fixing tool bracket of big gear flange
- Great Service Support:Please check whether your model is suitable for our products before purchase. If there is any problem with our products, please feel free to contact us, we will solve the problem for you at the first time and provide you with the best after-sales service.
- See more on Amazon...
Brand: Kujunpao | Manufacturer: Kujunpao
See On Amazon #12
Massive PRO KIT Pinion Flange Holding Tool Holder Yoke Wrench 3/8" THICK Steel Made USA Compatible with Jeep Ring Rear End Axle Nut Seal 8.8 40 Dana!
Asin: B085XN2SM8
Includes Tube Tang To Allow Use Of ~1" Tube Or Pipe As A Handle! 1/2" And 3/4" Sqaure Drive As Well.
Fits The Super Popular Ford 8.8 Flange - Ratech And Allstar Tool Does Not!!!!!.
3/8" Thickness Steel Can Properly Handle The Immense Torque Necessary For This Job! Other Guys Bend - Ratech And Allstar Are Made From Flimsy .250".
Features
- PRO KIT INCLUDES 1/2"-20 grade 8 threaded Pinion Shaft Center Forcing Screw, Flange Holding tool, Puller Tool, Custom Molded Foam Interior Purple case, and Massive's BFB ( Big Freakin' Bar) with vinyl grip handle!
- 3/8 thickness steel can PROPERLY handle the immense torque necessary for this job! Other guys BEND - Ratech and Allstar are made from flimsy .250
- Includes tube tang to allow use of ~1 tube or pipe as a handle! 1/2 and 3/4 sqaure drive as well
- FITS the SUPER popular FORD 8.8 flange - Ratech and Allstar tool DOES NOT!!!!!
- See more on Amazon...
Brand: Massive Speed System | Manufacturer: Massive Speed System
Dimensions: 8.00 x 46.00 x 4.00 Inches | Weight: 8.00 Pounds
See On Amazon #13
Allstar Performance ALL68372 Pinion Yoke Wrench
Asin: B004QGBMT2 | Model: ALL68372 | PartNumber: ALL68372 | Ean: 0848238036657 | UPC: 848238036657
Country Of Origin : United States.
Fit Type: Vehicle Specific.
Package Weight: 0.318 Kilograms.
Features
- Package Dimensions: 0.762 L x 11.938 W x 22.86 H (centimetres)
- Package Weight: 0.318 kilograms
- Country of Origin : United States
- Fit type: Vehicle Specific
- See more on Amazon...
Brand: Allstar Performance | Manufacturer: Allstar Performance
Dimensions: 2.40 x 103.20 x 57.60 inches | Weight: 0.00 pounds
Warranty: Allstar Performance warrants each new product to be free from defects in both workmanship and materials for a period of ninety (90) days from the date of purchase.
See On Amazon #14
JEGS Ring & Pinion Setup Tool Kit | Made in USA | Hard Anodized Aluminum Components | Includes Dial Indicator, Laminated Instructions, Storage Case, and 3 Indicator Extensions
Asin: B078WJN4YY | Ean: 0012657036370, 0889944087045 | UPC: 012657036370, 889944087045
Made In Usa With High Quality Components And Assembly.
Accurately Measures In 0.001 Inch Increments.
Engineered For Use With Center Sections That Have 1/2 Inch Diameter Bolts And May Be Used On Housings With 5/8 Inch Diameter Bolts By Holding The Fixture In Place For Measurement.
Hard Anodized Aluminum Components For A Lifetime Of Strength And Durability.
Features
- PROPERLY SET PINION DEPTH to prevent gear whining, premature wear, and failure
- HARD ANODIZED ALUMINUM COMPONENTS for a lifetime of strength and durability
- MADE IN USA with high quality components and assembly
- ENGINEERED FOR USE WITH center sections that have 1/2 inch diameter bolts and may be used on housings with 5/8 inch diameter bolts by holding the fixture in place for measurement
- ACCURATELY MEASURES IN 0.001 inch increments
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 2.60 x 12.20 x 12.30 Inches | Weight: 2.81 pounds
See On Amazon #15
CTA Tools 1442 Drive Pinion Flange Holding Tool - Compatible with Ford
Asin: B0C47XVT5W | Model: 1442 | PartNumber: 1442 | Ean: 0053001014422 | UPC: 053001014422
It Has A Universal Design With A ยฝโ Slots That Will Fit The Flange Bolt Centerlines Up To 2-5/8โ.
The Pinion Flange Holding Tool Fits Most Ford, Lincoln, And Mercury Drive Pinion Flanges. Compare To Ford Factory Tool #303-126.
This Tool Includes: 5/16โ And 3/8โ Bolts, Nuts, And Washers.
The Yoke Is Designed To Safely Apply Torque On The Pinion Nut.
Features
- The pinion flange holding tool is servicing Ford vehicles
- The yoke is designed to safely apply torque on the pinion nut
- It has a universal design with a slots that will fit the flange bolt centerlines up to 2-5/8
- This tool includes: 5/16 and 3/8 bolts, nuts, and washers
- The pinion flange holding tool fits most Ford, Lincoln, and Mercury drive pinion flanges. Compare to Ford Factory Tool #303-126
- See more on Amazon...
Brand: CTA Tools | Manufacturer: CTA Tools
Weight: 3.70 pounds
Warranty: See manufacturer website
See On Amazon #16
Rogierra Pinion Yoke Wrench Tool for Loosening Pinion Flange and Nuts Fits Most Sockets Fits for Most Sockets Extra 1/2" Hole
Asin: B0CW32CGTM | Model: SPYW-01 | PartNumber: SPYW-01
ใ๐๐ฑ๐ญ๐ซ๐ ๐๐ญ๐ซ๐๐ง๐ ๐ญ๐กใ: Crafted From Premium Stainless Steel For Durability And Strength, Ensuring It Withstands High Torque Applications Without Peeling Or Degradation. This Tool Is Built To Handle The Rigorous Demands Of Your Tasks..
ใ๐๐ข๐๐ ๐ซ๐๐ง๐ ๐ ๐จ๐ ๐๐ฉ๐ฉ๐ฅ๐ข๐๐๐ญ๐ข๐จ๐ง๐ฌใ: Ideal For Applying Torque With A Pinion Wrench, Effectively Loosening Even The Most Stubborn Pinion Nuts. Utilize The Pinion Flange Tool With A Torque Wrench To Securely Tighten Fixing Bolts And Nuts Or To Set Bearing Preload. Additionally, It Excels In Handling Other High-Torque Tasks Such As Squeezing Sleeves..
ใ๐๐จ๐ฉ๐ก๐ข๐ฌ๐ญ๐ข๐๐๐ญ๐๐ ๐๐๐ฌ๐ข๐ ๐งใ: Unlike Traditional Yoke Flange Wrenches With Only One 1/2" Square Socket, Our Design Includes An Additional 1/2" Square Socket To Provide Versatility In Your Work. The Stainless Steel Construction Guarantees Long-Term Usage, Offering Reliability For Years To Come..
ใ ๐๐ซ๐๐๐ข๐ฌ๐ ๐๐ข๐ณ๐ใ: Available In Various Slotted Bolt Styles To Accommodate 1/4", 5/16", And 3/8" Fasteners. Features A Center Socket Hole Measuring 2"..
Features
- : Designed to be compatible with Ford, Dana, AMC, and GM yokes, making it suitable for use with most pinion gears and companion flanges.
- : Available in various slotted bolt styles to accommodate 1/4, 5/16, and 3/8 fasteners. Features a center socket hole measuring 2.
- : Crafted from premium stainless steel for durability and strength, ensuring it withstands high torque applications without peeling or degradation. This tool is built to handle the rigorous demands of your tasks.
- : Unlike traditional yoke flange wrenches with only one 1/2 square socket, our design includes an additional 1/2 square socket to provide versatility in your work. The stainless steel construction guarantees long-term usage, offering reliability for years to come.
- : Ideal for applying torque with a pinion wrench, effectively loosening even the most stubborn pinion nuts. Utilize the pinion flange tool with a torque wrench to securely tighten fixing bolts and nuts or to set bearing preload. Additionally, it excels in handling other high-torque tasks such as squeezing sleeves.
- See more on Amazon...
Brand: Rogierra | Manufacturer: Rogierra
Warranty: 1 year
See On Amazon #17
LKONWEE Stainless Steel Pinion Yoke Wrench Tool - Extra Strength Puller for Loosening Pinion Flange and Nuts - Extra 1/2" Hole,Compatible with Most AMC, Dana, Ford, and GM Yokes
Asin: B09HGSGSG2 | Model: YWR-12 | PartNumber: YWR-12 | Ean: 0770619594015 | UPC: 770619594015
There Are 8 Slots That Are Compatible With 1/4-Inch, 5/16-Inch, And 3/8-Inch Bolt Sizes In Different Distances And Configurations..
Holds The Yoke In Place -- Use The Pinion Wrench While Applying Torque. It Will Help You Loosen Even The Most Stubborn Pinion Nuts. You Also Can Grasp The 1 / 2 "Circuit Breaker Rod Or 3 / 4" Drive Tool As A Lever To Improve Your Work Efficiency..
Usually The Yoke Flange Wrench Has Only One 1/2" Square Socket, But We Consider That You May Need To Use More Than One In The Work, So We Have Added An Additional 1/2" Square Socket.Finally, The 2-Inch Center Socket Hole Fits Different Types Of Torque Wrenches..
Compatible With Most Ford, Amc, Dana, And Gm Yokes. Fits Almost All Pinion And Companion Flanges..
Features
- Made of high quality stainless steel, it can handle very high torque needed .Compare with soft carbon steel ,this flange wrench not easy to bend,our stainless steel material allows you to use this tool for many years.
- Compatible with most Ford, AMC, Dana, and GM yokes. Fits almost all pinion and companion flanges.
- There are 8 slots that are compatible with 1/4-inch, 5/16-inch, and 3/8-inch bolt sizes in different distances and configurations.
- Usually the yoke flange wrench has only one 1/2 square socket, but we consider that you may need to use more than one in the work, so we have added an additional 1/2 square socket.Finally, the 2-inch center socket hole fits different types of torque wrenches.
- Holds The Yoke In Place -- Use the pinion wrench while applying torque. It will help you loosen even the most stubborn pinion nuts. you also can grasp the 1 / 2 circuit breaker rod or 3 / 4 drive tool as a lever to improve your work efficiency.
- See more on Amazon...
Brand: LKONWEE | Manufacturer: LKONWEE
See On Amazon #18
GST Rear Differential Pinion Flange Remover Tool Compatible for Land Rover 205 984
Asin: B09CN9VNGW | Ean: 0850007419806 | UPC: 850007419806
Oem Ref : 205 984.
Compatible For Land Rover Lr2 Vehicles.
Features
- To restrain pinion shaft during removal / installation of the securing nut.
- Compatible For Land Rover LR2 Vehicles
- OEM Ref : 205 984
- See more on Amazon...
Brand: GST | Manufacturer: Kommen Tools
See On Amazon #19
Moser Engineering T006 Axle Pinion Centering Tool
Asin: B00EB8Y0EY | Model: T006 | PartNumber: T006 | Ean: 0012922004011 | UPC: 012922004011
The Package Height Is 25.9 Centimeters.
The Package Width Is 20.5 Centimeters.
The Package Length Is 4.4 Centimeters.
Features
- Package Weight : 0.465 pounds
- The package length is 4.4 centimeters
- The package height is 25.9 centimeters
- The package width is 20.5 centimeters
- See more on Amazon...
Brand: Moser Engineering | Manufacturer: Moser Engineering
Dimensions: 1.00 x 15.00 x 7.00 inches | Weight: 0.88 Pounds
See On Amazon ๏ปฟ
Looking For Something Else?
Search