Drill America 1/8" Quick Change Cobalt Drill Bit with Hex Shank, COHEX Series
Asin: B0BTTR87L9 | Model: COHEX1/8 | PartNumber: COHEX1/8 | Ean: 0887861309547 | UPC: 887861309547
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.135 Degree Split Point Tip For Self-Centering And Reducing Thrust; Compared To A Conventional 118 Degree Tip, These Drills Wont Go "Walking" On You.
Manufactured To National Aerospace Standard 907.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
1/4 In. Hex Shank Can Be Used In Quick Change Impact Drivers.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 1/4 in. hex shank can be used in quick change impact drivers
- 135 degree split point tip for self-centering and reducing thrust; Compared to a conventional 118 degree tip, these drills wont go walking on you
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- Manufactured to National Aerospace standard 907
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon Similar To Drill America 1 8 Quick
#1
Drill America - DWDRSD5/8 5/8" Reduced Shank High Speed Steel Drill Bit with 1/2" Shank, DWDRSD Series
Asin: B00FXIEV0O | Model: DWDRSD5/8 | PartNumber: DWDRSD5/8 | Ean: 0887861033992 | UPC: 887861033992
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Drilling In Low And Medium Tensile Strength Materials.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for drilling in low and medium tensile strength materials
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 0.40 x 7.00 x 0.60 Inches | Weight: 0.30 Pounds
See On Amazon #2
Drill America DMOD1/8 1/8" Solid Carbide Drill Bit, DMOD Series
Asin: B01LY0OYC5 | Model: DMOD1/8 | PartNumber: DMOD1/8 | Ean: 0887861047654 | UPC: 887861047654
Used On Materials Such As Cast Iron, Non-Ferrous Alloys, High Silicon Aluminum, Copper, Plastics, Bronze, Hard Rubber, Plexiglass, And Other Similar Materials.
Must Be Used With A Rigid Tool-Holding Systems..
Solid Carbide Tools Offer Long Tool Life And Faster Cutting Speeds Than Other Substrates, But Are More Brittle.
Can Be Used In High Temperature Drilling Applications.
Features
- Designed for drilling abrasive materials when drilling accuracy must be maintained
- Can be used in high temperature drilling applications
- Used on materials such as cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, bronze, hard rubber, plexiglass, and other similar materials
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle
- Must be used with a rigid tool-holding systems.
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #3
Drill America 5/8" Bridge/Construction Reamer with 1/2" Shank, DWR Series
Asin: B00FXJGTO4 | Model: DWRRBSS5/8 | PartNumber: DWRRBSS5/8 | Ean: 0887861150637 | UPC: 887861150637
Point Is Tapered To Permit Entry Into Overlapping Holes.
High Speed Steel For Use In A Wide Range Of Materials Such As Aluminum, Brass, Bronze, Cast Iron, Copper, Iron, Metal, Nickel, Plastic, Steel.
Short Length Facilitates Use In Areas With Limited Access With Three Symmetrically Placed Flats On Shank Provide Positive Grip In Portable Electric And Pneumatic Tools..
Bridge Reamers Are Used To Align Existing Holes Prior To Bolt Or Rivet Installation.
Features
- Bridge Reamers are also called Construction Reamers
- Bridge reamers are used to align existing holes prior to bolt or rivet installation
- Point is tapered to permit entry into overlapping holes
- Short length facilitates use in areas with limited access with three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools.
- High speed steel for use in a wide range of materials such as Aluminum, Brass, Bronze, Cast Iron, Copper, Iron, Metal, Nickel, Plastic, Steel
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #4
Drill America - DWTMHX14X1.5 m14 X 1.5 Carbon Steel Hex Rethreading Die, DWT Series
Asin: B00FXKKX3Q | Model: DWTMHX14X1.5 | PartNumber: DWTMHX14X1.5 | Ean: 0887861105187, 7147905968219 | UPC: 887861105187
Hex Die Is For Dressing Over Bruised Or Rusty Threads.
Ideal For Maintenance In The Shop Or Field.
No Special Holder Is Required For This Type Of Die, Any Wrench Large Enough Will Suffice.
Right-Hand Cut Tools Have A Cutting Action That Engages When They Are Run In A Clockwise Direction.
Features
- Made of carbon steel
- Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
- Hex die is for dressing over bruised or rusty threads
- No special holder is required for this type of die, any wrench large enough will suffice
- Ideal for maintenance in the shop or field
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #5
Drill America DWTS8X1.25 m8 x 1.25 High Speed Steel 4 Flute Hand Tap Set, DWT Series
Asin: B00FXKY33M | Model: DWTS8X1.25 | PartNumber: DWTS8X1.25 | Ean: 0887861072373 | UPC: 887861072373
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #6
Drill America - POUM5X.8 m5 x .8 Tap and 4.20mm Drill Bit Kit, POU Series
Asin: B072FBTP4H | Model: POUM5X.8 | PartNumber: POUM5X.8 | Ean: 0887861290241 | UPC: 887861290241
Black Oxide Drill Bit Is Ideal For Production, Maintenance Or Portable Drilling Jobs.
Set Comes In Plastic Pouch.
M5 X .8 Hss Plug Tap And Matching 4.20Mm Hss Drill Bit In Plastic Pouch.
High Speed Steel Plug Hand Threading Tap Is Popular For Use In General Machine Tapping Or Cnc Tapping.
Features
- Set contains high speed steel plug hand tap and matching high speed steel drill bit
- High speed steel plug hand threading tap is popular for use in general machine tapping or cnc tapping
- Black oxide drill bit is ideal for production, maintenance or portable drilling jobs
- M5 x .8 hss plug tap and matching 4.20Mm hss drill bit in plastic pouch
- Set comes in plastic pouch
- See more on Amazon...
First Available: 05/11/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #7
Drill America 1/4" - 1-1/8" Tap Capacity Adjustable Tap Wrench, DWT Series
Asin: B00DMEYTLW | Model: DWTTW7 | PartNumber: DWTTW7 | Ean: 0887861082143 | UPC: 887861082143
11/64" - 41/64" Hand Reamer Capacity.
19" Overall Length.
1/8" - 3/4" Npt Pipe Tap Capacity.
Features
- 1/4" - 1-1/8" Tap Capacity
- 1/8 - 3/4 NPT Pipe Tap Capacity
- 11/64 - 41/64 Hand Reamer Capacity
- 19 Overall Length
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Weight: 1.00 pounds
See On Amazon #8
Drill America - GLBCOX69/64 9/64" x 6" Cobalt Aircraft Extension Drill Bit, GLBCO Series, 1 Count (Pack of 1)
Asin: B00B2QYU2A | Model: GLBCOX69/64 | PartNumber: GLBCOX69/64 | Ean: 0887861045469 | UPC: 887861045469
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
6" Overall Length For Drilling Where Extra Length For Reach Is Required.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
135° Split Point Tip Prevents Drill From Walking.
Features
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135 split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- 6 overall length for drilling where extra length for reach is required
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #9
Drill America Tap and Drill Index/Case, 6-32 - 1/2"-13 NC (9 Sizes), 12600
Asin: B01BQ7FGTK | Model: HUT99 | PartNumber: HUT99 | Ean: 0887861321624 | UPC: 887861321624
Each Storage Hole Precisely Sized For Accurate, Quick Selection.
Made In U.S.A..
Corrosion Resistant, Epoxy Baked On Coating With A Secure, Snap-Lock Steel Cover.
6-32 Tap And #36 Drill Bit, 8-32 #29 Drill Bit, 10-24 #25 Drill Bit, 10-32 #21 Drill Bit, 1/4-20 #7 Drill Bit, 5/16-18#F Drill Bit, 3/8-16 #5/16 Drill Bit, 7/16-14#U Drill Bit, 1/2-13#27/64.
Features
- Rugged, heavy gauge all steel case holds sizes #6-32 - 1/2"-13 NC (9 Sizes)
- 6-32 tap and #36 drill bit, 8-32 #29 drill bit, 10-24 #25 drill bit, 10-32 #21 drill bit, 1/4-20 #7 drill bit, 5/16-18#F drill bit, 3/8-16 #5/16 drill bit, 7/16-14#U drill bit, 1/2-13#27/64
- Each storage hole precisely sized for accurate, quick selection
- Corrosion resistant, epoxy baked on coating with a secure, snap-lock steel cover
- Made in U.S.A.
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Weight: 1.00 Pounds
See On Amazon #10
Drill America 1/2 x 18" Ship Auger Bit, DMS Series
Asin: B00FXE572Y | Model: DMS73-1020 | PartNumber: DMS73-1020 | Ean: 0887861185219 | UPC: 887861185219
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
For Woodworking.
Comes Individually Packaged.
Comes With Polished Finish.
Features
- Made of carbon steel
- Comes with polished finish
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Comes individually packaged
- For woodworking
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 0.50 x 19.00 x 1.70 Inches | Weight: 0.58 pounds
See On Amazon #11
Drill America 5/8" Reduced Shank High Speed Steel Black & Gold Contractor Drill Bit with 3-Flat 1/2" Shank, KFD3F Series
Asin: B08SF96FX4 | Model: KFD3F5/8 | PartNumber: KFD3F5/8 | Ean: 0887861294331 | UPC: 887861294331
135 Degree Split Point Tip For Self-Centering And Reducing Thrust. Compared To A Conventional 118 Degree Tip, These Drills Wont Go "Walking" On You..
Common Flute And Overall Length For Minimal Adjustment During Tool Changes. 3" Flute Length, 6" Overall Length, 1/2" Shank.
3-Flat 1/2" Reduced Shank Creates An Extra Secure Hold In Your Chuck..
For Use In A Wide Range Of Materials In The Iron And Steel Families Such Aluminum, Iron, Steel And Other Metal Drilling..
Features
- Contractor grade drill bit manufactured from M1 High Speed Steel.
- For use in a wide range of materials in the iron and steel families such aluminum, iron, steel and other metal drilling.
- 135 degree split point tip for self-centering and reducing thrust. Compared to a conventional 118 degree tip, these drills wont go walking on you.
- 3-Flat 1/2 reduced shank creates an extra secure hold in your chuck.
- Common flute and overall length for minimal adjustment during tool changes. 3 Flute Length, 6 Overall Length, 1/2 Shank
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 0.63 x 6.00 x 0.63 Inches | Weight: 0.21 Pounds
See On Amazon #12
Drill America - DWDCO5/8 5/8" Reduced Shank Cobalt Drill Bit with 1/2" Shank, DWDCO Series
Asin: B00FXHD2PK | Model: DWDCO5/8 | PartNumber: DWDCO5/8 | Ean: 0887861041980 | UPC: 887861041980
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to National Aerospace standard 907
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 4.00 x 6.00 x 4.00 Inches | Weight: 0.10 Pounds
See On Amazon #13
Drill America - DWTHXNPT-Set 6 Piece NPT Pipe Die Set, 1/8", 1/4", 3/8", 1/2", 3/4" and 1", Rethreading, Carbon Steel, Wooden Case
Asin: B07WTRM9VV | Model: DWTHXNPT-SET | PartNumber: DWTHXNPT-SET | Ean: 0887861293976 | UPC: 887861293976
Right-Hand Cut Tools Have A Cutting Action That Engages When They Are Run In A Clockwise Direction.
Included Components: 6 Piece Hex Pipe Dies.
No Special Holder Is Required For This Type Of Die, Any Wrench Large Enough Will Suffice.
Ideal For Maintenance In The Shop Or Field.
Hex Die Is For Dressing Over Bruised Or Rusty Threads.
Made Of Carbon Steel.
Features
- 6 Piece Carbon Steel NPT Hex Die Set
- Made of carbon steel
- Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
- Hex die is for dressing over bruised or rusty threads
- No special holder is required for this type of die, any wrench large enough will suffice
- Ideal for maintenance in the shop or field
- Included Components: 6 Piece Hex Pipe Dies
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 4.00 x 8.00 x 6.00 inches
See On Amazon #14
Drill America - GLBCOX123/8 3/8" x 12" Cobalt Aircraft Extension Drill Bit, GLBCO Series
Asin: B00B2QXJRC | Model: GLBCOX123/8 | PartNumber: GLBCOX123/8 | Ean: 0887861046381 | UPC: 887861046381
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
12" Overall Length For Drilling Where Extra Length For Reach Is Required.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
135° Split Point Tip Prevents Drill From Walking.
Features
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135 split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- 12 overall length for drilling where extra length for reach is required
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #15
Drill America - KFDRSD1-1/8 1-1/8" Reduced Shank High Speed Steel Black & Gold KFD Drill Bit with 1/2" Shank, KFD Series
Asin: B00AYZ4DJA | Model: KFDRSD1-1/8 | PartNumber: KFDRSD1-1/8 | Ean: 0887861037310 | UPC: 887861037310
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Heavy Duty 135 Degree Split Point.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold And Black Surface Treated For Use In Stainless Steel And Other Hard Metal Drilling.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Gold and black surface treated for use in stainless steel and other hard metal drilling
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Heavy duty 135 degree split point
- See more on Amazon...
Brand: Drill America | Manufacturer: Chicology
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 0.10 Pounds
See On Amazon #16
Drill America - DWT57181 3/8"-24 High Speed Steel 3 Flute Spiral Point Tap, DWT Series
Asin: B00BD5NNQO | Model: DWT57181 | PartNumber: DWT57181 | Ean: 0887861075442 | UPC: 887861075442
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #17
Drill America - DWDCO1P12 #1 Cobalt Drill Bit (Pack of 12), DWDCO Series
Asin: B00FXH7ORM | Model: DWDCO1P12 | PartNumber: DWDCO1P12 | Ean: 0887861198431 | UPC: 887861198431
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Drilling In Tough, High Tensile Strength Materials.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for drilling in tough, high tensile strength materials
- See more on Amazon...
First Available: 05/15/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #18
Drill America - DWTT8X1 m8 x 1 High Speed Steel 4 Flute Taper Tap, (Pack of 1)
Asin: B00DLCTJGA | Model: DWTT8X1 | PartNumber: DWTT8X1 | Ean: 0887861072304 | UPC: 887861072304
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #19
Drill America 1"-8 UNC High Speed Steel Taper Tap, (Pack of 1)
Asin: B00FXJYCAM | Model: DWT54923 | PartNumber: DWT54923 | Ean: 0887861070140 | UPC: 887861070140
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon
Looking For Something Else?
Search