Geekstory BE-180 GPS Module Beidou GPS AntennaTTL Level 38400bps for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller
Asin: B0BV5TGFD4
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Data Level : Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable..
What You Will Get: 1*Be-180 Gps Module; 1*1.00Mm 4Pins Cable; 1* 20Cm 1.0Mm 4P Connector Male Cable.
This Be-180 Gps Module Has Flash To Save Configuration, So You Do Not Need To Reset Data Next Time When You Use It.. Baud Rate : 4800Bps To 921600Bps, Default 38400Bps..
The Tx Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place..
Features
- This BE-180 GPS Module using the latest 10th generation chip When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place.
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
- This BE-180 GPS Module has Flash to save configuration, so you do not need to reset data next time when you use it.. Baud Rate : 4800bps to 921600bps, Default 38400bps.
- What you will get: 1*BE-180 GPS Module; 1*1.00mm 4pins Cable; 1* 20cm 1.0mm 4P Connector Male Cable
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.39 x 1.18 x 1.18 Inches
Warranty: Six Months
See On Amazon Similar To Geekstory BE180 GPS Module Beidou
#1
GPS Module GPS NEO-6M(Ar duino GPS Drone Microcontroller GPS Receiver) Compatible with 51 Microcontroller STM32 Ar duino UNO R3 with IPEX Antenna High Sensitivity for Navigation Satellite Positioning
Asin: B07P8YMVNT | Model: SN12SF83QOH11452IC | PartNumber: SN12SF83QOH11452IC | Ean: 0608603912524, 0673400165183 | UPC: 673400165183, 608603912524
Gps Baud Needs To Be Set To 9600 Instead Of 4800; Pps Pin Is Not Needed Unless Using The Gps To Drive A Hardware High Precision Clock; Gt-U7 Main Module Gps Module Using The Original Ublox 7Th Generation Chip, Software Is Compatible With Neo-6M. Gt-U7 Module, With High Sensitivity, Low Power Consumption, Miniaturization, Its Extremely High Tracking Sensitivity Greatly Expanded Its Positioning Of The Coverage.
Usb Directly Connected To The Computer, That Is, With The Host Computer-Owned Serial Port Function, No Need For External Serial Module, Send Ipx Interface Active Antenna.
With A Usb Interface, You Can Directly Use The Phone Data Cable On The Computer Point Of View Positioning Effect; With Ipex Antenna Interface, The Default Distribution Of Active Antenna, Can Be Quickly Positioned.
Note: Please Use The Gt-U7 Gps Module In An Open Place, The Led Will Flash After The Satellite Signal Is Found. Bad Weather And Indoor Use Will Affect The Accuracy Of Positioning.
Features
- How to use the GPS module better, the link is obtained in the Product guides and documents, please download it before use
- Note: Please use the GT-U7 GPS module in an open place, the LED will flash after the satellite signal is found. Bad weather and indoor use will affect the accuracy of positioning
- GPS baud needs to be set to 9600 instead of 4800; PPS pin is not needed unless using the GPS to drive a hardware high precision clock; GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage
- With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned
- USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Dimensions: 0.39 x 1.09 x 3.94 inches | Weight: 0.01 Pounds
See On Amazon #2
Geekstory 2 PCS GT-U7 GPS Module GPS Receiver Navigation Satellite Positioning NEO-6M with 6M 51 Microcontroller STM32 R3+IPEX Active GPS Antenna High Sensitivity for Arduino Drone Raspberry Pi Flight
Asin: B0B5WCV38H
Gt-U7 Gps Module With A Usb Interface, You Can Directly Use The Phone Data Cable On The Computer Point Of View Positioning Effect. Usb Directly Connected To The Computer, That Is, With The Host Computer-Owned Serial Port Function, No Need For External Serial Module, Ipx Interface Active Antenna Included In The Package!.
If You Have Any Questions About Using Our Products, Such As Needing Technical Documentation For A Product Please Feel Free To Contact Us (Please Click On "Geekstory" You Can Find "Sold By Geekstory" Under The Buy Now Button, Click On "Ask A Question" In The New Page To Send Us An Email.) We Will Try Our Best To Help You Out.
Operating Voltage: 3.6V-5V (Or Direct Usb Power Supply), Operating Baud Rate: 9600 (Can Be Modified). Application: Vehicle-Mounted, Handheld Devices Such As Pdas, Vehicle Monitoring, Mobile Phones, Camcorders And Other Mobile Positioning Systems.
Gt-U7 Module, With High Sensitivity, Low Power Consumption, Miniaturization, Its Extremely High Tracking Sensitivity Greatly Expanded Its Positioning Of The Coverage. Such As Narrow Urban Sky, Dense Jungle Environment, Gt-U7 Can Be High-Precision Positioning.
Features
- GT-U7 main module GPS module using the original 7th generation chip, Software is compatible with NEO -6M
- GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage. such as narrow urban sky, dense jungle environment, GT-U7 can be high-precision positioning
- GT-U7 GPS Module with a USB interface, you can directly use the phone data cable on the computer point of view positioning effect. USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, IPX interface active antenna included in the package!
- Operating voltage: 3.6V-5V (or direct usb power supply), Operating baud rate: 9600 (can be modified). Application: Vehicle-mounted, Handheld devices such as PDAs, Vehicle monitoring, Mobile phones, camcorders and other mobile positioning systems
- If you have any questions about using our products, such as needing technical documentation for a product please feel free to contact us (please click on Geekstory you can find Sold by Geekstory under the Buy Now button, click on Ask a question in the new page to send us an email.) We will try our best to help you out
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Warranty: Six months
See On Amazon #3
Geekstory VK-162 G-Mouse USB GPS Dongle M8030 Chip 72 Channel Navigation Module External GPS Antenna Remote Mount USB GPS Receiver with Flash for Raspberry Pi Support Google Earth Window Linux
Asin: B0B1ZW9XJK | Model: FZ3677 | PartNumber: FZ3677
It Is A Magntized Antenna,If Get The Gps Signal,Please Use The Gps Module Outdoor,If You Want To Use The Gps Module Indoor,Please Install Gps Signal Amplifier In Your Room.
If You Have Any Issue When Using Our Product,Or You Need Product Use Documentation, Please Click “Geekstory” To Em-Ail Us.
The Usb Gps Is A Great, Easy, And An Awesome Solution For Travelers.It Works Anywhere Around The World. After You Download The Maps For The Country Traveling, It Will Pin Point Exactly Where You Are Without Having To Pay Any Service.
The Cable Length Is 200Cm. Support Gps + Glonass(Default), Gps + Beidou, Glonass + Beidou. Vk-162 Usb Gps Has Flash To Save Setting. Your Settings Will Be Saved The Next Time You Use It, Which Will Make It Easier To Use.
Features
- VK-162 GPS support windows and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work
- The cable length is 200cm. Support GPS + GLONASS(default), GPS + beidou, GLONASS + beidou. VK-162 usb gps has flash to save setting. Your settings will be saved the next time you use it, which will make it easier to use
- It is a magntized antenna,if get the GPS signal,please use the GPS module outdoor,If you want to use the GPS module indoor,please install GPS signal amplifier in your room
- The USB GPS is a great, easy, and an awesome solution for travelers.It works anywhere around the world. After you download the maps for the country traveling, it will pin point exactly where you are without having to pay any service
- If you have any issue when using our product,or you need product use documentation, please click Geekstory to em-ail us
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 1.93 x 1.50 x 0.63 inches
See On Amazon #4
Geekstory 2PCS VK-162 G-Mouse USB GPS Dongle Navigation Module External GPS Antenna Remote Mount USB GPS Receiver for Raspberry Pi Support Google Earth Window Linux
Asin: B0B6P2TGMN
You Can Get 2 X Vk-162 Gps Receiver. The Cable Length Is 190Cm. The Usb Gps Is A Great, Easy, And An Awesome Solution For Travelers.It Works Anywhere Around The World. After You Download The Maps For The Country Traveling, It Will Pin Point Exactly Where You Are Without Having To Pay Any Service..
Document Link: Https://Tinyurl.Com/Usb-Gps-Module.
This Usb Gps Can Be Used For Mac Computer, But It Requires Very Professional Technical Skills..
Documentation You Can Find At The Bottom Of The Details Page - Product Guides And Documents: (User Manual (Pdf), Which Contains Details On How To Use And Links To The Drivers..
It Is A Magntized Antenna,If Get The Gps Signal,Please Use The Gps Module Outdoor,If You Want To Use The Gps Module Indoor,Please Install Gps Signal Amplifier In Your Room.
If You Have Any Issue When Using Our Product,Or You Need Product Use Documentation, Please Click “Geekstory”, Click “Ask A Question” To Em-Ail Us.
Features
- VK-162 GPS support windows and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work.
- If you have any issue when using our product,or you need product use documentation, please click Geekstory , click Ask a question to em-ail us
- You can get 2 x VK-162 GPS Receiver. The cable length is 190cm. The USB GPS is a great, easy, and an awesome solution for travelers.It works anywhere around the world. After you download the maps for the country traveling, it will pin point exactly where you are without having to pay any service.
- It is a magntized antenna,if get the GPS signal,please use the GPS module outdoor,If you want to use the GPS module indoor,please install GPS signal amplifier in your room
- This usb gps can be used for mac computer, but it requires very professional technical skills.
- Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.
- Document link: https://tinyurl.com/usb-gps-module
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 1.38 x 6.50 x 3.86 inches
See On Amazon #5
Geekstory VK-172 Gmouse USB GPS Glonass Dongle Module Support an-dorid Linux Windows 10/8/7/vista/XP/Raspberry Pi
Asin: B078Y597M6 | Model: FZ1007 | PartNumber: FZ1007 | Ean: 0702795763985 | UPC: 702795763985
The Default Output Is The Product Gps Protocol Data. You Can Test The Software Or Serial Commands To Modify Switch Gps/Glonass Protocol Data.
The Product Documentation Link Cannot Be Displayed. If You Need Technical Documentation, Please Click “Geekstory” To Em-Ail Us..
Documentation You Can Find At The Bottom Of The Details Page - Product Guides And Documents: (User Manual (Pdf), Which Contains Details On How To Use And Links To The Drivers..
Vk-172 Automatically Adapt The Baud Rate. The Baud Rate Has Any Data Output.
Vk-172 Gps Is Not Plug And Play For Most Device. You Need To Install Driver Before Make It Work. Raspberry Pi And Linux No Need Driver. (Drivers And Links To Documentation You Can Find On The Details Page Of The User Manual.).
Features
- VK 172 USB GPS works with Windows, Android, Linux, Raspberry PI and Google Earth, not for IOS system
- VK-172 gps is NOT plug and play for most device. You need to install driver before make it work. Raspberry Pi and linux no need driver. (Drivers and links to documentation you can find on the details page of the user manual.)
- The default output is the product GPS protocol data. You can test the software or serial commands to modify switch GPS/GLONASS protocol data
- VK-172 automatically adapt the baud rate. The baud rate has any data output
- The product documentation link cannot be displayed. If you need technical documentation, please click Geekstory to em-ail us.
- Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
See On Amazon #6
Geekstory G72 G-Mouse USB GPS Dongle Glonass Beidou GNSS Receiver Module for Raspberry Pi Linux Window Geekstory, Better Than vk-172 GPS
Asin: B07SMRXSC8 | Model: WT3661 | PartNumber: WT3661 | Ean: 0747356634083 | UPC: 747356634083
You Need To Install Driver Before Use It On Window, But Plug And Play For Raspberry Pi And Linux. If You Need Some Driver Links And Using Videos For G72 Gps Usb, Please Contact Us..
Documentation You Can Find At The Bottom Of The Details Page - Product Guides And Documents: (User Manual (Pdf), Which Contains Details On How To Use And Links To The Drivers..
1 X Usb Gps Receiver Module, The Product Dimensions: 60X24x9mm. Update Frequency: 1~10Hz, Baud Rate: 4800, 9600, 19200, 38400, 57600, 115200Bps.
The Device Defaults To Gps+Beidou, Gps+Glonass Needs To Send Instructions To Change..
Features
- G72 gps usb use the newer chip(M8130-KT Chip), better than vk-172 gps.This usb gps works with Windows, Raspberry pi, Linux and Google Earth, not for iOS Android system.
- The device defaults to GPS+Beidou, GPS+Glonass needs to send instructions to change.
- You need to install driver before use it on window, but plug and play for raspberry pi and Linux. If you need some driver links and using videos for G72 gps usb, Please contact us.
- 1 X USB GPS Receiver Module, the product dimensions: 60X24X9mm. Update frequency: 1~10Hz, Baud rate: 4800, 9600, 19200, 38400, 57600, 115200bps
- Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.79 x 2.36 x 1.18 inches | Weight: 0.02 pounds
See On Amazon #7
Geekstory USB GPS Module Antenna Supports GPS+GLONASS Beidou Built-in Flash for Arduino Pixhawk IPEX Compatible, Better Than VK-162
Asin: B07ZR8R17Q
Built-In Tcxo Crystal And Farad Capacitors For Faster Hot Start.
Documentation You Can Find At The Bottom Of The Details Page - Product Guides And Documents: (User Manual (Pdf), Which Contains Details On How To Use And Links To The Drivers..
The Product Documentation Link Cannot Be Displayed. If You Need Technical Documentation, Please Click “Geekstory”, Click “Ask A Question” To Em-Ail Us.
Built-In Flash, Free Configuration Product Baud Rate, Output Statement, Output Rate, Second Pulse And Other Parameters.
Features
- Supports GPS+GLONASS (default); GPS+Beidou;GLONASS+ BeiDou multiple modes Built-in LNA signal amplifier
- Built-in Flash, free configuration product baud rate, output statement, output rate, second pulse and other parameters
- Built-in TCXO Crystal and Farad Capacitors for Faster Hot Start
- The product documentation link cannot be displayed. If you need technical documentation, please click Geekstory , click Ask a question to em-ail us
- Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 1.89 x 1.10 x 0.33 inches
See On Amazon #8
DIYmalls BN-880 GPS Module HMC5883 Compass Support GPS Glonass Beidou NMEA-0183 9600bps 1Hz for Arduino RC FPV Drone Flight Control
Asin: B086ZKFFY4 | Ean: 0747356637572 | UPC: 747356637572
Bn 880 Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Data When You Use It Next Time..
If You Have Any Problem, Please Do As Follow: Click "Diymalls"(You Can Find "Sold By Diymalls" Under Buy Now Button), In The New Page, Click "Ask A Question"..
You Can Check Bn180 Bn220 Gps Module Via "Visit The Diymalls Store".
Bn880 Gps Module Is Suitable For Open Source Flight Controller, Not For Flight Control With Scm. When You Use It For R Pi, There Is No Driver Needed But You Need To Install Software.
Features
- bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L
- bn880 gps module is suitable for Open source flight controller, not for flight control with SCM. When you use it for r pi, there is no driver needed but you need to install software
- bn 880 gps module has flash to save configuration. So you do not need to reset data when you use it next time.
- You can check bn180 bn220 gps module via Visit the DIYmalls Store
- If you have any problem, please do as follow: click DIYmalls(you can find Sold by DIYmalls under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Weight: 0.04 Pounds
See On Amazon #9
GPS Module FS-IBG01 Support GPS Beidou Satellite Dual Satellite System Positioning for RC Car RC Boat
Asin: B0B9XPFLR7 | Model: Z48151 | PartNumber: Z48151
3. Maximum Height: 50,000M. Time Accuracy: Rms 99% 30Ns. Speed Measurement Accuracy: 0.05 M/S. Positioning Accuracy: 0.3 Degrees. Acceleration: ?4G..
5. Cold Start Time: Average 26S. Hot Start Time: Average 1S. Led Display: Yes. Input Power: 3.5~9V/Dc. Temperature Range: -10??+60?. Humidity Range: 20%?95%..
4. Positioning Accuracy: 0.3 Degrees. Speed Measurement Accuracy: 0.05 M/S. Data Format: I-Bus2. Update Frequency: 10Hz..
2. Support Gps And Beidou Satellite Dual Satellite System Positioning. In Dual-Mode Mode, The Speed Measurement Accuracy Is 0.05M/S, And The Positioning Accuracy Is Better Than 0.5M..
Features
- 1. Supports multiple satellite systems such as GPS and Beidou, and has the characteristics of high sensitivity, short acquisition time, strong anti-interference ability and low power consumption of the system.
- 2. Support GPS and Beidou satellite dual satellite system positioning. In dual-mode mode, the speed measurement accuracy is 0.05m/s, and the positioning accuracy is better than 0.5m.
- 3. Maximum height: 50,000m. Time Accuracy: RMS 99% 30ns. Speed measurement accuracy: 0.05 m/s. Positioning accuracy: 0.3 degrees. Acceleration: ?4g.
- 4. Positioning accuracy: 0.3 degrees. Speed measurement accuracy: 0.05 m/s. Data format: i-BUS2. Update frequency: 10Hz.
- 5. Cold start time: average 26s. Hot start time: average 1s. LED display: yes. Input power: 3.5~9V/DC. Temperature range: -10??+60?. Humidity range: 20%?95%.
- See more on Amazon...
Brand: FEICHAO | Manufacturer: Flysky
See On Amazon #10
DIYmalls BE-180 GPS Receiver Module TTL 10th Chip 38400bps for Arduino FPV Aircraft CC3D Flight Control, Replace BN-180 GPS
Asin: B0BTM3QRDJ
-Be 180 Module Connection With Flight Control, Usb To Ttl And Develop Board: Gnd To Gnd, Tx To Rx, Rx To Tx, Vcc To 5V..
-The Blue (Tx) Light Flashes When Power On, Indicating There Is Data Output..
-Be-180 Gps Should Be Used Outdoor, And The Antenna Side Facing To The Sky..
-Baud Rate: 4800Bps To 921600Bps, Default 38400Bps( Remember It Is Not 9600Bps)..
Features
- -be180 GPS equiped with 10th chip to replace the bn180 gps, more accurate and receiving signal faster.
- -Baud Rate: 4800bps to 921600bps, default 38400bps( Remember it is NOT 9600bps).
- -be 180 module connection with flight control, usb to ttl and develop board: gnd to gnd, tx to rx, rx to tx, vcc to 5v.
- -be-180 gps should be used outdoor, and the antenna side facing to the sky.
- -The blue (TX) light flashes when power on, indicating there is data output.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Warranty: 30 days
See On Amazon #11
Geekstory DY-880 TTL GPS Receiver Module with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass Beidou for Arduino FPV Aircraft CC3D Flight Control, Replace BN-880 GPS
Asin: B0CGQZRSWJ
Dy-880Ttl Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Next Time When You Use It. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software.
Dits Data Level Is Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
Dy-880Ttl Gps Module Is Dual Module Compass, With And Electronic Compass Ic Hmc5883l.
Features
- DY-880TTL is suitable for Open source flight controller, not for flight control with SCM
- DY-880TTL gps module is dual module compass, with and electronic compass IC HMC5883L
- DY-880TTL gps module has flash to save configuration. So you do not need to reset next time when you use it. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- When you use it for Raspberry Pi, there is no driver needed but you need to install software
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.32 x 2.72 x 1.81 inches
See On Amazon #12
Geekstory DY-180TTL GPS Receiver Module Dual Glonass GPS Navigation Module TTL Level 9600bps with GPS Antenna for Arduino FPV Aircraft,Replace BN-180 GPS
Asin: B0CGQXNW35
Data Level : Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable..
What You Will Get: 1 X Dy-180Ttl Gps Module, 3 X 4P 1.0Mm Pitch Cable.
This Dy-180Ttl Gps Module Does Not Have Flash And Cannot Be Saved. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
The Pw Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place..
Features
- This DY-180 TTL GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- The PW LED flash means gps module output normally. The PPS LED flash means gps module locate your place.
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
- This DY-180TTL GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- What you will get: 1 X DY-180TTL GPS Module, 3 X 4P 1.0mm Pitch Cable
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.32 x 2.72 x 1.81 inches
See On Amazon #13
GPS+BDS Beidou Dual-Mode Module Flight Control Satellite Positioning Navigator ATGM336H Replacement for NEO-M8N
Asin: B0CJ792RFG
Features
- GPS+BDS Beidou dual-mode module flight control satellite positioning navigator ATGM336H replacement for NEO-M8N
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
See On Amazon #14
Geekstory USB GPS Module Antenna Supports GPS+GLONASS Beidou Built-in Flash + Waterproof Active GPS Antenna 3V-5V DC, Connectors SMA Male Plug
Asin: B08BBZ8JZ5
Built-In Flash, Free Configuration Product Baud Rate, Output Statement, Output Rate, Second Pulse And Other Parameters.
How To Email Us? Please Click “Geekstory”(You Can Find "Sold By Geekstory" Under Buy Now Button), In The New Page, Click “Ask A Question” To Email Us.
Gps Antenna Dc Voltage: 3V To 5V，Waterproof Rating: Ip65, Ip67.
Supports Gps+Glonass (Default); Gps+Beidou;Glonass+ Beidou Multiple Modes Built-In Lna Signal Amplifier.
Features
- Video link: https://youtu.be/30qJsynTceY
- Supports GPS+GLONASS (default); GPS+Beidou;GLONASS+ BeiDou multiple modes Built-in LNA signal amplifier
- Built-in Flash, free configuration product baud rate, output statement, output rate, second pulse and other parameters
- GPS Antenna DC Voltage: 3V to 5V Waterproof rating: IP65, IP67
- How to email us? Please click Geekstory (you can find Sold by Geekstory under Buy Now button), in the new page, click Ask a question to email us
- See more on Amazon...
Brand: Geekstory
See On Amazon #15
Geekstory BN-880 GPS Module U8 with Flash HMC5883L Compass + CP2102 6 in 1 USB-UART Serial Adapter Module with 4P Dupont Cable Jumper Wire, Female to Female for Windows, Linux, Arduino
Asin: B0B74ZRDQF
Dits Data Level Is Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
Cp2102 Serial Adapter Module Compatible With Windows 7/8/10, Linux, Arduino, Nextion Display, Beitian Gps Module, Esp8266 Transceiver Indicator : When The Serial Line To Send Or Receive Data Lines , The Board Will Receive Indicator Lights For Easy Debugging.
6 In 1 Multifunctional Interface Module Supports Usb To Ttl, Usb To 232, Usb To 485, Ttl To 232, Ttl To 485, 232 To 485. Serial Interface Module Cp2102 Usb Ttl 485 232 Mutual Transfer, Before Using The 6 In 1 Multifunctional Interface Module, You Need To Install The Cp2102 Driver.
Bn 880 Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Next Time When You Use It. When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software.
Features
- Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L. BN-880 is suitable for Open source flight controller, not for flight control with SCM
- Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it. When you use it for Raspberry Pi, there is no driver needed but you need to install software
- DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- 6 in 1 Multifunctional interface module supports USB to TTL, USB to 232, USB to 485, TTL to 232, TTL to 485, 232 to 485. Serial Interface Module CP2102 USB TTL 485 232 Mutual Transfer, Before using the 6 in 1 Multifunctional interface module, you need to install the CP2102 driver
- CP2102 serial adapter module compatible with Windows 7/8/10, Linux, Arduino, nextion display, beitian gps module, ESP8266 Transceiver indicator : When the serial line to send or receive data lines , the board will receive indicator lights for easy debugging
- See more on Amazon...
Brand: Geekstory
See On Amazon #16
REYAX RY836AI High Performance GPS Glonass BeiDou Parallel Mode Antenna Module NEO-M8N core
Asin: B0BS2983VJ | Ean: 0749874759903 | UPC: 749874759903
Antenna.
Gps.
Brand: REYAX | Manufacturer: REYAX
Warranty: NO
See On Amazon #17
Geekstory VK-162 G-Mouse USB GPS Dongle Navigation Module External GPS Antenna Remote Mount USB GPS Receiver+G72 Glonass Beidou GNSS Receiver
Asin: B09MRTMLWD
Vk -162 Is A Magntized Antenna,If Get The Gps Signal,Please Use The Gps Module Outdoor,If You Want To Use The Gps Module Indoor,Please Install Gps Signal Amplifier In Your Room.
G72 Device Defaults To Gps+Beidou, Gps+Glonass Needs To Send Instructions To Change..
G72 Gps Usb Use The Newer Chip(M8130-Kt Chip), Better Than Vk-172 Gps.This Usb Gps Works With Windows, Android, Raspberry Pi, Linux And Google Earth, Not For Ios System. You Need To Install Driver Before Use It On Window, But Plug And Play For Raspberry Pi And Linux..
Vk-162 Gps Support Windows And Linux System, Not For Android And Ios System. It Is Not Plug And Play For Most Device. You Must Install Driver Before Make It Work..
Features
- 1pcs VK-162 G-Mouse USB GPS Dongle Navigation Module + 1pcs G72 G-Mouse USB GPS Dongle Glonass Beidou GNSS Receiver Module
- VK-162 GPS support windows and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work.
- VK -162 is a magntized antenna,if get the GPS signal,please use the GPS module outdoor,If you want to use the GPS module indoor,please install GPS signal amplifier in your room
- G72 gps usb use the newer chip(M8130-KT Chip), better than vk-172 gps.This usb gps works with Windows, Android, Raspberry pi, Linux and Google Earth, not for IOS system. You need to install driver before use it on window, but plug and play for raspberry pi and Linux.
- G72 device defaults to GPS+Beidou, GPS+Glonass needs to send instructions to change.
- See more on Amazon...
Brand: Geekstory
See On Amazon #18
MENGJIE GPS+BD Beidou Module ATGM332D Serial Satellite, Multi-Mode Satellite Navigation and Positioning chip, with 32 Tracking Channels
Asin: B0BKRMKLDL | Model: MPU9250 | PartNumber: MPU9250 | Ean: 0604787445827 | UPC: 604787445827
Dual Interface: 1. Type-C Interface, Plug And Play, Directly Connect To Pc To View Data. 2. Xh2.54X4pin Interface.
Our Team Will Provide Technical Support, If You Need Any Help, Please Don't Hesitate To Contact Me: 2634018975(At)Qq( Dot) Com.
Built-In Antenna Detection Circuit. Small Size, Immersion Gold Process, Excellent Heat Dissipation Performance..
Excellent Positioning And Navigation Function, High Sensitivity, 32 Channels, Support Single-System Positioning Of Bds/Gps/Glonass Satellite Navigation System, And Multi-System Joint Positioning In Any Combination..
Features
- The antenna is matched with -type network impedance, the standing wave ratio is lower than 1.65, and the satellite search performance is vital.
- Excellent positioning and navigation function, high sensitivity, 32 channels, support single-system positioning of BDS/GPS/GLONASS satellite navigation system, and multi-system joint positioning in any combination.
- Dual interface: 1. TYPE-C interface, plug and play, directly connect to PC to view data. 2. XH2.54x4Pin interface
- Built-in antenna detection circuit. Small size, immersion gold process, excellent heat dissipation performance.
- Our team will provide technical support, if you need any help, please don't hesitate to contact me: 2634018975(at)qq( dot) com
- See more on Amazon...
Manufacturer: MengJie
See On Amazon #19
Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps with GPS Passive Antenna+CP2102 6 in 1 USB-UART Serial Adapter Module with 4P Dupont Cable Jumper Wire,Female to Female for Window
Asin: B0B76DLH3N
Data Level : Ttl Or Rs-232,Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
Cp2102 Serial Adapter Module Compatible With Windows 7/8/10, Linux, Arduino, Nextion Display, Beitian Gps Module, Esp8266 Transceiver Indicator : When The Serial Line To Send Or Receive Data Lines , The Board Will Receive Indicator Lights For Easy Debugging.
6 In 1 Multifunctional Interface Module Supports Usb To Ttl, Usb To 232, Usb To 485, Ttl To 232, Ttl To 485, 232 To 485. Serial Interface Module Cp2102 Usb Ttl 485 232 Mutual Transfer, Before Using The 6 In 1 Multifunctional Interface Module, You Need To Install The Cp2102 Driver.
When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software. The Tx Led Flash Means Gps Module Output Normally.The Pps Led Flash Means Gps Module Locate Your Place..
Features
- BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory.
- When you use it for Raspberry Pi, there is no driver needed but you need to install software. The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place.
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- 6 in 1 Multifunctional interface module supports USB to TTL, USB to 232, USB to 485, TTL to 232, TTL to 485, 232 to 485. Serial Interface Module CP2102 USB TTL 485 232 Mutual Transfer, Before using the 6 in 1 Multifunctional interface module, you need to install the CP2102 driver
- CP2102 serial adapter module compatible with Windows 7/8/10, Linux, Arduino, nextion display, beitian gps module, ESP8266 Transceiver indicator : When the serial line to send or receive data lines , the board will receive indicator lights for easy debugging
- See more on Amazon...
Brand: Geekstory
See On Amazon
Looking For Something Else?
Search