Geekstory BN-880 GPS Module U8 with Flash HMC5883L Compass + CP2102 6 in 1 USB-UART Serial Adapter Module with 4P Dupont Cable Jumper Wire, Female to Female for Windows, Linux, Arduino
Asin: B0B74ZRDQF
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Dits Data Level Is Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
Cp2102 Serial Adapter Module Compatible With Windows 7/8/10, Linux, Arduino, Nextion Display, Beitian Gps Module, Esp8266 Transceiver Indicator : When The Serial Line To Send Or Receive Data Lines , The Board Will Receive Indicator Lights For Easy Debugging.
6 In 1 Multifunctional Interface Module Supports Usb To Ttl, Usb To 232, Usb To 485, Ttl To 232, Ttl To 485, 232 To 485. Serial Interface Module Cp2102 Usb Ttl 485 232 Mutual Transfer, Before Using The 6 In 1 Multifunctional Interface Module, You Need To Install The Cp2102 Driver.
Bn 880 Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Next Time When You Use It. When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software.
Features
- Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L. BN-880 is suitable for Open source flight controller, not for flight control with SCM
- Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it. When you use it for Raspberry Pi, there is no driver needed but you need to install software
- DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- 6 in 1 Multifunctional interface module supports USB to TTL, USB to 232, USB to 485, TTL to 232, TTL to 485, 232 to 485. Serial Interface Module CP2102 USB TTL 485 232 Mutual Transfer, Before using the 6 in 1 Multifunctional interface module, you need to install the CP2102 driver
- CP2102 serial adapter module compatible with Windows 7/8/10, Linux, Arduino, nextion display, beitian gps module, ESP8266 Transceiver indicator : When the serial line to send or receive data lines , the board will receive indicator lights for easy debugging
- See more on Amazon...
Brand: Geekstory
See On Amazon Similar To Geekstory BN880 GPS Module U8
#1
Readytosky M8N GPS Module Built-in Compass with GPS Antenna Mount for Standard Pixhawk 2.4.6 2.4.8 APM 2.6 2.8 Flight Controller
Asin: B01KK9A8QG | Model: XGT60-BLACK | PartNumber: XGT60-BLACK | Ean: 0757450335106 | UPC: 757450335106
★A New Generation M8n Gps,With Low Power Consumption And High Precision..
★★★ Attention: The Gps Can Only Use In Pixhawk And Apm Flight Controller,It Can't Work With Other Flight Controller..
★The Gps Light Only Can Light Up When It Search The Satellite Signal Outdoor; Rom Already Been Fix,It Cannot Be Flash And Change..
★The Ultimate Accuracy Is 0.6 Meters, Actually Almost 0.9 Meters, Greater Than The Previous Generation Neo-7N 1.4-1.6 Meters Accuracy..
Features
- Special designed for Pixhawk 2.4.6 2.4.8 flight controller,ASIN:B07CHQ7SZ4.(Note:If you use it to APM Flight Controller, Please replace the connect by yourself.)
- The ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy.
- A new generation M8N GPS,with low power consumption and high precision.
- The GPS light only can light up when it search the satellite signal outdoor; ROM already been fix,it cannot be flash and change.
- Attention: the GPS can only use in Pixhawk and APM Flight controller,it can't work with other flight controller.
- See more on Amazon...
Brand: Readytosky | Manufacturer: Readytosky
Dimensions: 0.79 x 8.27 x 5.91 inches | Weight: 0.12 Pounds
See On Amazon #2
Geekstory BE-180 GPS Module Beidou GPS AntennaTTL Level 38400bps for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller
Asin: B0BV5TGFD4
Data Level : Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable..
What You Will Get: 1*Be-180 Gps Module; 1*1.00Mm 4Pins Cable; 1* 20Cm 1.0Mm 4P Connector Male Cable.
This Be-180 Gps Module Has Flash To Save Configuration, So You Do Not Need To Reset Data Next Time When You Use It.. Baud Rate : 4800Bps To 921600Bps, Default 38400Bps..
The Tx Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place..
Features
- This BE-180 GPS Module using the latest 10th generation chip When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place.
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
- This BE-180 GPS Module has Flash to save configuration, so you do not need to reset data next time when you use it.. Baud Rate : 4800bps to 921600bps, Default 38400bps.
- What you will get: 1*BE-180 GPS Module; 1*1.00mm 4pins Cable; 1* 20cm 1.0mm 4P Connector Male Cable
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.39 x 1.18 x 1.18 inches
Warranty: Six Months
See On Amazon #3
Geekstory BN-880 GPS Module U8 with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass Beidou Car Navigation for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller
Asin: B078Y6323W | Model: FZ2920 | PartNumber: FZ2920 | Ean: 0702795764043 | UPC: 702795764043
Bn 880 Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Next Time When You Use It.
When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software.
Dits Data Level Is Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
Bn 880 Gps Module Is Dual Module Compass, With And Electronic Compass Ic Hmc5883l.
Features
- BN-880 is suitable for Open source flight controller, not for flight control with SCM
- Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L
- Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it
- DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- When you use it for Raspberry Pi, there is no driver needed but you need to install software
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.39 x 1.18 x 1.18 inches | Weight: 0.04 pounds
See On Amazon #4
Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk F3 CC3D Betaflight F4 Flight Control
Asin: B07PRDY6DS | Ean: 0747356629621 | UPC: 747356629621
The Tx Led Flash Means Gps Module Output Normally.The Pps Led Flash Means Gps Module Locate Your Place..
Bn 220 Gps Module Documentation Link Cannot Be Displayed. If You Need Technical Documentation, Please Click “Ask A Question” To Em-Ail Us.
Data Level : Ttl Or Rs-232,Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software.
Features
- BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory.
- When you use it for Raspberry Pi, there is no driver needed but you need to install software
- The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place.
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- BN 220 gps module documentation link cannot be displayed. If you need technical documentation, please click Ask a question to em-ail us
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.87 x 0.79 x 0.79 inches | Weight: 0.01 pounds
See On Amazon #5
Geekstory 2 PCS GT-U7 GPS Module GPS Receiver Navigation Satellite Positioning NEO-6M with 6M 51 Microcontroller STM32 R3+IPEX Active GPS Antenna High Sensitivity for Arduino Drone Raspberry Pi Flight
Asin: B0B5WCV38H
Gt-U7 Gps Module With A Usb Interface, You Can Directly Use The Phone Data Cable On The Computer Point Of View Positioning Effect. Usb Directly Connected To The Computer, That Is, With The Host Computer-Owned Serial Port Function, No Need For External Serial Module, Ipx Interface Active Antenna Included In The Package!.
If You Have Any Questions About Using Our Products, Such As Needing Technical Documentation For A Product Please Feel Free To Contact Us (Please Click On "Geekstory" You Can Find "Sold By Geekstory" Under The Buy Now Button, Click On "Ask A Question" In The New Page To Send Us An Email.) We Will Try Our Best To Help You Out.
Operating Voltage: 3.6V-5V (Or Direct Usb Power Supply), Operating Baud Rate: 9600 (Can Be Modified). Application: Vehicle-Mounted, Handheld Devices Such As Pdas, Vehicle Monitoring, Mobile Phones, Camcorders And Other Mobile Positioning Systems.
Gt-U7 Module, With High Sensitivity, Low Power Consumption, Miniaturization, Its Extremely High Tracking Sensitivity Greatly Expanded Its Positioning Of The Coverage. Such As Narrow Urban Sky, Dense Jungle Environment, Gt-U7 Can Be High-Precision Positioning.
Features
- GT-U7 main module GPS module using the original 7th generation chip, Software is compatible with NEO -6M
- GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage. such as narrow urban sky, dense jungle environment, GT-U7 can be high-precision positioning
- GT-U7 GPS Module with a USB interface, you can directly use the phone data cable on the computer point of view positioning effect. USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, IPX interface active antenna included in the package!
- Operating voltage: 3.6V-5V (or direct usb power supply), Operating baud rate: 9600 (can be modified). Application: Vehicle-mounted, Handheld devices such as PDAs, Vehicle monitoring, Mobile phones, camcorders and other mobile positioning systems
- If you have any questions about using our products, such as needing technical documentation for a product please feel free to contact us (please click on Geekstory you can find Sold by Geekstory under the Buy Now button, click on Ask a question in the new page to send us an email.) We will try our best to help you out
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Warranty: Six months
See On Amazon #6
DIYmalls BN-180 GPS Glonass Module TTL NMEA-0183 1Hz 9600bps for Arduino Aircraft RC FPV Drone Flight Control
Asin: B086ZKWYP5 | Ean: 0747356637558 | UPC: 747356637558
Data Level : Ttl Or Rs-232,Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
If You Have Any Problem, Please Do As Follow: Click "Diymalls"(You Can Find "Sold By Diymalls" Under Buy Now Button), In The New Page, Click "Ask A Question"..
Bn 180 Gps Doesn't Have Flash And Compass. If You Need It, Please Check Bn-880 Gps Module Via "Visit The Diymalls Store".
When You Power Up Bn 180 Gps Module The First Time In A New Location, It Always Takes Longer To Find Satillites. This Is Referred To As “Cold Start”. Once You’Ve Done It The First Time, Later When You Restart Bn180 Gps Module, It Will Get A Lock Much Faster..
Features
- BN180 GPS Module can be used with pi, esp32 development board, pc (driver required), drone flight controller etc.
- When you power up bn 180 GPS module the first time in a new location, it always takes longer to find satillites. This is referred to as cold start . Once you ve done it the first time, later when you restart bn180 GPS module, it will get a lock much faster.
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- BN 180 gps doesn't have flash and compass. If you need it, please check bn-880 gps module via Visit the DIYmalls Store
- If you have any problem, please do as follow: click DIYmalls(you can find Sold by DIYmalls under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Dimensions: 0.24 x 0.71 x 0.71 Inches | Weight: 0.02 pounds
See On Amazon #7
DIYmalls BN-220 GPS Module TTL Dual GPS Glonass w/Flash NMEA-0183 9600bps 1Hz for Arduino RC FPV Drone Flight Control
Asin: B086ZK9BT4 | Ean: 0747356637565 | UPC: 747356637565
Bn220 Gps Has Flash To Save Configuration, So You Do Not Need To Reset Data Next Time When You Use It. But Bn220 Gps Doesn't Have Compass. If You Need Gps With Flash And Compass, Please Check Bn-880 Gps Via "Visit The Diymalls Store".
If You Have Any Problem, Please Do As Follow: Click "Diymalls"(You Can Find "Sold By Diymalls" Under Buy Now Button), In The New Page, Click "Ask A Question"..
Data Level : Ttl Or Rs-232,Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
When You Power Up Bn 220 Gps Module The First Time In A New Location, It Always Takes Longer To Find Satillites. This Is Referred To As “Cold Start”. Once You’Ve Done It The First Time, Later When You Restart Bn220 Gps Module, It Will Get A Lock Much Faster..
Features
- When you use it for pi, there is no driver installation needed but you need to install software
- When you power up bn 220 GPS module the first time in a new location, it always takes longer to find satillites. This is referred to as cold start . Once you ve done it the first time, later when you restart bn220 GPS module, it will get a lock much faster.
- bn220 gps has flash to save configuration, so you do not need to reset data next time when you use it. But bn220 gps doesn't have compass. If you need gps with flash and compass, please check bn-880 gps via Visit the DIYmalls Store
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- If you have any problem, please do as follow: click DIYmalls(you can find Sold by DIYmalls under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Dimensions: 0.59 x 7.48 x 3.15 inches | Weight: 0.02 pounds
See On Amazon #8
Geekstory DY-180TTL GPS Receiver Module Dual Glonass GPS Navigation Module TTL Level 9600bps with GPS Antenna for Arduino FPV Aircraft,Replace BN-180 GPS
Asin: B0CGQXNW35
Data Level : Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable..
What You Will Get: 1 X Dy-180Ttl Gps Module, 3 X 4P 1.0Mm Pitch Cable.
This Dy-180Ttl Gps Module Does Not Have Flash And Cannot Be Saved. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
The Pw Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place. Note: Without Pps Output, Only Pps Indicator.
Features
- This DY-180 TTL GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- The PW LED flash means gps module output normally. The PPS LED flash means gps module locate your place. Note: without PPS output, only PPS indicator
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
- This DY-180TTL GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- What you will get: 1 X DY-180TTL GPS Module, 3 X 4P 1.0mm Pitch Cable
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.32 x 2.72 x 1.81 inches
See On Amazon #9
DIYmalls BN-880 GPS Module HMC5883 Compass Support GPS Glonass Beidou NMEA-0183 9600bps 1Hz for Arduino RC FPV Drone Flight Control
Asin: B086ZKFFY4 | Ean: 0747356637572 | UPC: 747356637572
Bn 880 Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Data When You Use It Next Time..
If You Have Any Problem, Please Do As Follow: Click "Diymalls"(You Can Find "Sold By Diymalls" Under Buy Now Button), In The New Page, Click "Ask A Question"..
You Can Check Bn180 Bn220 Gps Module Via "Visit The Diymalls Store".
Bn880 Gps Module Is Suitable For Open Source Flight Controller, Not For Flight Control With Scm. When You Use It For R Pi, There Is No Driver Needed But You Need To Install Software.
Features
- bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L
- bn880 gps module is suitable for Open source flight controller, not for flight control with SCM. When you use it for r pi, there is no driver needed but you need to install software
- bn 880 gps module has flash to save configuration. So you do not need to reset data when you use it next time.
- You can check bn180 bn220 gps module via Visit the DIYmalls Store
- If you have any problem, please do as follow: click DIYmalls(you can find Sold by DIYmalls under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Weight: 0.04 pounds
See On Amazon #10
Beitian GPS Module with Antenna UAV Drone M10050 M9140 chip Ultra-Low Power GNSS Receiver for Track GPS BE-180 BK-180 BN-180 BE-220 BK-220 BN-220
Asin: B0C8HW6QQ7
With Flash, The Configuration Can Be Changed, And The Power Will Not Be Lost.
Note: Please Use The Gps Module In An Open Place, The Led Will Flash After The Satellite Signal Is Found. Bad Weather And Indoor Use Will Affect The Accuracy Of Positioning..
Not Positioned, The Light Is Off; After 3D Positioning, The Blue Light Flashes.
The Red Light, The Pps Light, Does Not Light Up If It Is Not Positioned; After 3D Positioning, It Starts To Flash..
Features
- Update rate: 0.25Hz-18Hz,default 10Hz
- The red light, the PPS light, does not light up if it is not positioned; after 3D positioning, it starts to flash.
- With FLASH, the configuration can be changed, and the power will not be lost
- Not positioned, the light is off; after 3D positioning, the blue light flashes
- Note: Please use the GPS module in an open place, the LED will flash after the satellite signal is found. Bad weather and indoor use will affect the accuracy of positioning.
- See more on Amazon...
Brand: Beitian | Manufacturer: Beitian
See On Amazon #11
2PCs Beitian BE220 M8N GPS Module Support GPS GLONASS BeiDou for RC Long Range FPV Racing Drone Airplane
Asin: B081YTBNLY | Model: BN-220 | PartNumber: BN-220 | Ean: 0727161343462 | UPC: 727161343462
When It Is Used On Raspberry Pi, It Is Not Necessary To Install The Driver, But The Software Must Be Installed.
If You Have Any Questions, You Can Contact Us At Any Time.
If The Tx Led Indicator Flashes, It Means That The Be220 M8n Gps Module Is Operating Normally, And The Pps Led Indicator Flashes To Indicate That The Gps Module Has Found Your Location.
Note: It Does Not Have A Compass.
Features
- The BE220 M8N GPS module has a flash memory function to save the configuration, which can help you do not need to reset the data next time you use it.
- Note: it does not have a compass
- When it is used on Raspberry Pi, it is not necessary to install the driver, but the software must be installed
- If the TX LED indicator flashes, it means that the BE220 M8N GPS module is operating normally, and the PPS LED indicator flashes to indicate that the GPS module has found your location
- If you have any questions, you can contact us at any time
- See more on Amazon...
Brand: SoloGood | Manufacturer: Beitian
Dimensions: 0.02 x 0.03 x 0.03 inches
See On Amazon #12
M8N GPS Module, GPS Receiver Antenna, Drone GPS Navigator Unit with Onboard Compass Compatible with M8 Engine PX4 Pixhawk TR APM Flight Controller
Asin: B0CHFK661W
【Incorporated Compass】Equipped With An Onboard Compass, The Flight Controller Gps Module, Featuring An M8 Engine And Supporting Multiple Satellite Systems, And High Accuracy Saves Your Time And Effort During Operation..
【Compact And Versatile】The Drone Gps System Module Features A Smaller Size And Light Weigh, Making It Easy And Convenient To Carry And Ideal For Various Applications, And Supports Both Active And Passive Antennas..
【Pre-Configured Performance】Enjoy The Ease Of Use With Pre-Configured Gps Modules. They Come Pre-Flashed With The Correct Settings And Have Undergone Testing And Boasts A 10Ghz Refresh Rate For Improved Performance..
【Wide Compatibility】The M8n Gps Unit Is Compatible With Apm, Pixhawk, Cc3d, Tr Flight Controllers, And The Super High Precision And Efficient Star Searching Make It An Excellent Choice For Open-Source Controllers..
Features
- Rapid Searching Experience high-speed searching with this GPS module. In open areas, the GPS receiver antenna can find up to 6 stars in just 10 seconds, although search times may vary based on location and weather conditions.
- Wide Compatibility The M8N GPS unit is compatible with APM, Pixhawk, CC3D, TR flight controllers, and the super high precision and efficient star searching make it an excellent choice for open-source controllers.
- Incorporated Compass Equipped with an onboard compass, the flight controller GPS module, featuring an M8 engine and supporting multiple satellite systems, and high accuracy saves your time and effort during operation.
- Pre-Configured Performance Enjoy the ease of use with pre-configured GPS modules. They come pre-flashed with the correct settings and have undergone testing and boasts a 10GHz refresh rate for improved performance.
- Compact and Versatile The drone GPS system module features a smaller size and light weigh, making it easy and convenient to carry and ideal for various applications, and supports both active and passive antennas.
- See more on Amazon...
Brand: NestNiche | Manufacturer: NestNiche
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.07 pounds
See On Amazon #13
Geekstory USB GPS Module Antenna Supports GPS+GLONASS Beidou Built-in Flash for Arduino Pixhawk IPEX Compatible, Better Than VK-162
Asin: B07ZR8R17Q
Built-In Tcxo Crystal And Farad Capacitors For Faster Hot Start.
Documentation You Can Find At The Bottom Of The Details Page - Product Guides And Documents: (User Manual (Pdf), Which Contains Details On How To Use And Links To The Drivers..
The Product Documentation Link Cannot Be Displayed. If You Need Technical Documentation, Please Click “Geekstory”, Click “Ask A Question” To Em-Ail Us.
Built-In Flash, Free Configuration Product Baud Rate, Output Statement, Output Rate, Second Pulse And Other Parameters.
Features
- Supports GPS+GLONASS (default); GPS+Beidou;GLONASS+ BeiDou multiple modes Built-in LNA signal amplifier
- Built-in Flash, free configuration product baud rate, output statement, output rate, second pulse and other parameters
- Built-in TCXO Crystal and Farad Capacitors for Faster Hot Start
- The product documentation link cannot be displayed. If you need technical documentation, please click Geekstory , click Ask a question to em-ail us
- Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 1.89 x 1.10 x 0.33 inches
See On Amazon #14
DIYmalls BE-880 GPS Receiver Module Compass 10th Chip 38400bps for Arduino FPV CC3D Flight Control, Replace BN-880 GPS
Asin: B0BTM5N5GS
-Be 880 Module Connection With Flight Control, Usb To Ttl And Develop Board: Gnd To Gnd, Tx To Rx, Rx To Tx, Vcc To 5V..
-The Blue (Tx) Light Flashes When Power On, Indicating There Is Data Output..
-Be-880 Gps Should Be Used Outdoor, And The Antenna Side Facing To The Sky..
-Baud Rate: 4800Bps To 921600Bps, Default 38400Bps( Remember It Is Not 9600Bps)..
Features
- -be880 GPS equiped with 10th chip to replace the bn880 gps, more accurate and receiving signal faster.
- -Baud Rate: 4800bps to 921600bps, default 38400bps( Remember it is NOT 9600bps).
- -be 880 module connection with flight control, usb to ttl and develop board: gnd to gnd, tx to rx, rx to tx, vcc to 5v.
- -be-880 gps should be used outdoor, and the antenna side facing to the sky.
- -The blue (TX) light flashes when power on, indicating there is data output.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Warranty: 30 days
See On Amazon #15
Geekstory USB GPS Module Antenna Supports GPS+GLONASS Beidou Built-in Flash + Waterproof Active GPS Antenna 3V-5V DC, Connectors SMA Male Plug
Asin: B08BBZ8JZ5
Built-In Flash, Free Configuration Product Baud Rate, Output Statement, Output Rate, Second Pulse And Other Parameters.
How To Email Us? Please Click “Geekstory”(You Can Find "Sold By Geekstory" Under Buy Now Button), In The New Page, Click “Ask A Question” To Email Us.
Gps Antenna Dc Voltage: 3V To 5V，Waterproof Rating: Ip65, Ip67.
Supports Gps+Glonass (Default); Gps+Beidou;Glonass+ Beidou Multiple Modes Built-In Lna Signal Amplifier.
Features
- Video link: https://youtu.be/30qJsynTceY
- Supports GPS+GLONASS (default); GPS+Beidou;GLONASS+ BeiDou multiple modes Built-in LNA signal amplifier
- Built-in Flash, free configuration product baud rate, output statement, output rate, second pulse and other parameters
- GPS Antenna DC Voltage: 3V to 5V Waterproof rating: IP65, IP67
- How to email us? Please click Geekstory (you can find Sold by Geekstory under Buy Now button), in the new page, click Ask a question to email us
- See more on Amazon...
Brand: Geekstory
See On Amazon #16
Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps with GPS Passive Antenna+CP2102 6 in 1 USB-UART Serial Adapter Module with 4P Dupont Cable Jumper Wire,Female to Female for Window
Asin: B0B76DLH3N
Data Level : Ttl Or Rs-232,Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
Cp2102 Serial Adapter Module Compatible With Windows 7/8/10, Linux, Arduino, Nextion Display, Beitian Gps Module, Esp8266 Transceiver Indicator : When The Serial Line To Send Or Receive Data Lines , The Board Will Receive Indicator Lights For Easy Debugging.
6 In 1 Multifunctional Interface Module Supports Usb To Ttl, Usb To 232, Usb To 485, Ttl To 232, Ttl To 485, 232 To 485. Serial Interface Module Cp2102 Usb Ttl 485 232 Mutual Transfer, Before Using The 6 In 1 Multifunctional Interface Module, You Need To Install The Cp2102 Driver.
When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software. The Tx Led Flash Means Gps Module Output Normally.The Pps Led Flash Means Gps Module Locate Your Place..
Features
- BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory.
- When you use it for Raspberry Pi, there is no driver needed but you need to install software. The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place.
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- 6 in 1 Multifunctional interface module supports USB to TTL, USB to 232, USB to 485, TTL to 232, TTL to 485, 232 to 485. Serial Interface Module CP2102 USB TTL 485 232 Mutual Transfer, Before using the 6 in 1 Multifunctional interface module, you need to install the CP2102 driver
- CP2102 serial adapter module compatible with Windows 7/8/10, Linux, Arduino, nextion display, beitian gps module, ESP8266 Transceiver indicator : When the serial line to send or receive data lines , the board will receive indicator lights for easy debugging
- See more on Amazon...
Brand: Geekstory
See On Amazon #17
Xiangtat BN-880 GPS Module U8 with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass Beidou Car Navigation for Arduino Raspberry Pi Airc
Asin: B0B41TJ3YS | Ean: 0744915188124 | UPC: 744915188124
This Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Next Time When You Use It.
When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software.
Dits Data Level Is Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
It Is Dual Module Compass, With And Electronic Compass Ic Hmc5883l.
Features
- BN-880 is suitable for Open source flight controller, not for flight control with SCM
- It is dual module compass, with and electronic compass IC HMC5883L
- This gps module has flash to save configuration. So you do not need to reset next time when you use it
- DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- When you use it for Raspberry Pi, there is no driver needed but you need to install software
- See more on Amazon...
Brand: Xiangtat | Manufacturer: Xiangtat
Dimensions: 0.39 x 1.18 x 1.18 inches
Warranty: BN-880 GPS Module
See On Amazon #18
Geekstory BN-180 GPS Module UART TTL Dual Glonass GPS Car Navigation + BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna
Asin: B0B1877R4K
The Tx Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place. This Bn-180 Gps Module Does Not Have Flash And Cannot Be Saved. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
Bn 880 Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Next Time When You Use It. When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software..
Bn-880 Is Suitable For Open Source Flight Controller, Not For Flight Control With Scm, Bn 880 Gps Module Is Dual Module Compass, With And Electronic Compass Ic Hmc5883l..
This Bn-180 Gps Module Can Show Your Speed. When You Use It For Raspberry Pi, There Is No Driver Needed. Here Is Connection With Rpi, Red To 3.3V, Black To Gnd, Green To Txd, White To Rxd..
Features
- 1 PCS BN-180 GPS Module + 1 PCS BN-220 Dual GPS module
- This BN-180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place. This BN-180 GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- BN-880 is suitable for Open source flight controller, not for flight control with SCM, Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L.
- Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it. When you use it for Raspberry Pi, there is no driver needed but you need to install software.
- See more on Amazon...
Brand: Geekstory
See On Amazon #19
Geekstory BN-180 GPS Module UART TTL Dual Glonass GPS Car Navigation with GPS Antenna + CP2102 6 in 1 USB-UART Serial Adapter Module with 4P Dupont Cable Jumper Wire, Female to Female for Windows
Asin: B0B76GCZ1M
This Bn-180 Gps Module Does Not Have Flash And Cannot Be Saved. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
Cp2102 Serial Adapter Module Compatible With Windows 7/8/10, Linux, Arduino, Nextion Display, Beitian Gps Module, Esp8266 Transceiver Indicator : When The Serial Line To Send Or Receive Data Lines , The Board Will Receive Indicator Lights For Easy Debugging.
6 In 1 Multifunctional Interface Module Supports Usb To Ttl, Usb To 232, Usb To 485, Ttl To 232, Ttl To 485, 232 To 485. Serial Interface Module Cp2102 Usb Ttl 485 232 Mutual Transfer, Before Using The 6 In 1 Multifunctional Interface Module, You Need To Install The Cp2102 Driver.
Data Level : Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable. The Tx Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place..
Features
- BN-180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable. The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place.
- This BN-180 GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- 6 in 1 Multifunctional interface module supports USB to TTL, USB to 232, USB to 485, TTL to 232, TTL to 485, 232 to 485. Serial Interface Module CP2102 USB TTL 485 232 Mutual Transfer, Before using the 6 in 1 Multifunctional interface module, you need to install the CP2102 driver
- CP2102 serial adapter module compatible with Windows 7/8/10, Linux, Arduino, nextion display, beitian gps module, ESP8266 Transceiver indicator : When the serial line to send or receive data lines , the board will receive indicator lights for easy debugging
- See more on Amazon...
Brand: Geekstory
See On Amazon
Looking For Something Else?
Search