Geekstory BN-180 GPS Module UART TTL Dual Glonass GPS Car Navigation with GPS Antenna + CP2102 6 in 1 USB-UART Serial Adapter Module with 4P Dupont Cable Jumper Wire, Female to Female for Windows
Asin: B0B76GCZ1M
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.This Bn-180 Gps Module Does Not Have Flash And Cannot Be Saved. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
Cp2102 Serial Adapter Module Compatible With Windows 7/8/10, Linux, Arduino, Nextion Display, Beitian Gps Module, Esp8266 Transceiver Indicator : When The Serial Line To Send Or Receive Data Lines , The Board Will Receive Indicator Lights For Easy Debugging.
6 In 1 Multifunctional Interface Module Supports Usb To Ttl, Usb To 232, Usb To 485, Ttl To 232, Ttl To 485, 232 To 485. Serial Interface Module Cp2102 Usb Ttl 485 232 Mutual Transfer, Before Using The 6 In 1 Multifunctional Interface Module, You Need To Install The Cp2102 Driver.
Data Level : Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable. The Tx Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place..
Features
- BN-180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable. The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place.
- This BN-180 GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- 6 in 1 Multifunctional interface module supports USB to TTL, USB to 232, USB to 485, TTL to 232, TTL to 485, 232 to 485. Serial Interface Module CP2102 USB TTL 485 232 Mutual Transfer, Before using the 6 in 1 Multifunctional interface module, you need to install the CP2102 driver
- CP2102 serial adapter module compatible with Windows 7/8/10, Linux, Arduino, nextion display, beitian gps module, ESP8266 Transceiver indicator : When the serial line to send or receive data lines , the board will receive indicator lights for easy debugging
- See more on Amazon...
Brand: Geekstory
See On Amazon Similar To Geekstory BN180 GPS Module UART
#1
DIYmalls BN-220 GPS Module TTL Dual GPS Glonass w/Flash NMEA-0183 9600bps 1Hz for Arduino RC FPV Drone Flight Control
Asin: B086ZK9BT4 | Ean: 0747356637565 | UPC: 747356637565
Bn220 Gps Has Flash To Save Configuration, So You Do Not Need To Reset Data Next Time When You Use It. But Bn220 Gps Doesn't Have Compass. If You Need Gps With Flash And Compass, Please Check Bn-880 Gps Via "Visit The Diymalls Store".
If You Have Any Problem, Please Do As Follow: Click "Diymalls"(You Can Find "Sold By Diymalls" Under Buy Now Button), In The New Page, Click "Ask A Question"..
Data Level : Ttl Or Rs-232,Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
When You Power Up Bn 220 Gps Module The First Time In A New Location, It Always Takes Longer To Find Satillites. This Is Referred To As “Cold Start”. Once You’Ve Done It The First Time, Later When You Restart Bn220 Gps Module, It Will Get A Lock Much Faster..
Features
- When you use it for pi, there is no driver installation needed but you need to install software
- When you power up bn 220 GPS module the first time in a new location, it always takes longer to find satillites. This is referred to as cold start . Once you ve done it the first time, later when you restart bn220 GPS module, it will get a lock much faster.
- bn220 gps has flash to save configuration, so you do not need to reset data next time when you use it. But bn220 gps doesn't have compass. If you need gps with flash and compass, please check bn-880 gps via Visit the DIYmalls Store
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- If you have any problem, please do as follow: click DIYmalls(you can find Sold by DIYmalls under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Dimensions: 0.59 x 7.48 x 3.15 inches | Weight: 0.02 pounds
See On Amazon #2
Geekstory DY-220 GPS Receiver Module Dual GPS Glonass Module Navigation TTL Level 9600bps with Active Antenna Build-in Flash for Arduino FPV Aircraft, Replace BN-220 GPS
Asin: B0CGQYTDVN
Data Level : Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
What You Will Get: 1 X Dy-220Ttl Gps Module, 3 X 4P 1.0Mm Pitch Cable.
Dy-220Ttl Gps Module Has Flash To Save Configuration, So You Do Not Need To Reset Data Next Time When You Use It. But It Has No Compass. If You Need Gps With Flash And Compass, Please Buy Other From Geekstory..
The Pw Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place. Note: Without Pps Output, Only Pps Indicator.
Features
- This DY-220TTL GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- The PW LED flash means gps module output normally. The PPS LED flash means gps module locate your place. Note: without PPS output, only PPS indicator
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- DY-220TTL gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy other from Geekstory.
- What you will get: 1 X DY-220TTL GPS Module, 3 X 4P 1.0mm Pitch Cable
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.32 x 2.72 x 1.81 inches
See On Amazon #3
Beitian GPS Module with Antenna UAV Drone M10050 M9140 chip Ultra-Low Power GNSS Receiver for Track GPS BE-180 BK-180 BN-180 BE-220 BK-220 BN-220
Asin: B0C8HW6QQ7
With Flash, The Configuration Can Be Changed, And The Power Will Not Be Lost.
Note: Please Use The Gps Module In An Open Place, The Led Will Flash After The Satellite Signal Is Found. Bad Weather And Indoor Use Will Affect The Accuracy Of Positioning..
Not Positioned, The Light Is Off; After 3D Positioning, The Blue Light Flashes.
The Red Light, The Pps Light, Does Not Light Up If It Is Not Positioned; After 3D Positioning, It Starts To Flash..
Features
- Update rate: 0.25Hz-18Hz,default 10Hz
- The red light, the PPS light, does not light up if it is not positioned; after 3D positioning, it starts to flash.
- With FLASH, the configuration can be changed, and the power will not be lost
- Not positioned, the light is off; after 3D positioning, the blue light flashes
- Note: Please use the GPS module in an open place, the LED will flash after the satellite signal is found. Bad weather and indoor use will affect the accuracy of positioning.
- See more on Amazon...
Brand: Beitian | Manufacturer: Beitian
See On Amazon #4
Geekstory 2 PCS GT-U7 GPS Module GPS Receiver Navigation Satellite Positioning NEO-6M with 6M 51 Microcontroller STM32 R3+IPEX Active GPS Antenna High Sensitivity for Arduino Drone Raspberry Pi Flight
Asin: B0B5WCV38H
Gt-U7 Gps Module With A Usb Interface, You Can Directly Use The Phone Data Cable On The Computer Point Of View Positioning Effect. Usb Directly Connected To The Computer, That Is, With The Host Computer-Owned Serial Port Function, No Need For External Serial Module, Ipx Interface Active Antenna Included In The Package!.
If You Have Any Questions About Using Our Products, Such As Needing Technical Documentation For A Product Please Feel Free To Contact Us (Please Click On "Geekstory" You Can Find "Sold By Geekstory" Under The Buy Now Button, Click On "Ask A Question" In The New Page To Send Us An Email.) We Will Try Our Best To Help You Out.
Operating Voltage: 3.6V-5V (Or Direct Usb Power Supply), Operating Baud Rate: 9600 (Can Be Modified). Application: Vehicle-Mounted, Handheld Devices Such As Pdas, Vehicle Monitoring, Mobile Phones, Camcorders And Other Mobile Positioning Systems.
Gt-U7 Module, With High Sensitivity, Low Power Consumption, Miniaturization, Its Extremely High Tracking Sensitivity Greatly Expanded Its Positioning Of The Coverage. Such As Narrow Urban Sky, Dense Jungle Environment, Gt-U7 Can Be High-Precision Positioning.
Features
- GT-U7 main module GPS module using the original 7th generation chip, Software is compatible with NEO -6M
- GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage. such as narrow urban sky, dense jungle environment, GT-U7 can be high-precision positioning
- GT-U7 GPS Module with a USB interface, you can directly use the phone data cable on the computer point of view positioning effect. USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, IPX interface active antenna included in the package!
- Operating voltage: 3.6V-5V (or direct usb power supply), Operating baud rate: 9600 (can be modified). Application: Vehicle-mounted, Handheld devices such as PDAs, Vehicle monitoring, Mobile phones, camcorders and other mobile positioning systems
- If you have any questions about using our products, such as needing technical documentation for a product please feel free to contact us (please click on Geekstory you can find Sold by Geekstory under the Buy Now button, click on Ask a question in the new page to send us an email.) We will try our best to help you out
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Warranty: Six months
See On Amazon #5
Geekstory BE-180 GPS Module Beidou GPS AntennaTTL Level 38400bps for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller
Asin: B0BV5TGFD4
Data Level : Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable..
What You Will Get: 1*Be-180 Gps Module; 1*1.00Mm 4Pins Cable; 1* 20Cm 1.0Mm 4P Connector Male Cable.
This Be-180 Gps Module Has Flash To Save Configuration, So You Do Not Need To Reset Data Next Time When You Use It.. Baud Rate : 4800Bps To 921600Bps, Default 38400Bps..
The Tx Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place..
Features
- This BE-180 GPS Module using the latest 10th generation chip When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place.
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
- This BE-180 GPS Module has Flash to save configuration, so you do not need to reset data next time when you use it.. Baud Rate : 4800bps to 921600bps, Default 38400bps.
- What you will get: 1*BE-180 GPS Module; 1*1.00mm 4pins Cable; 1* 20cm 1.0mm 4P Connector Male Cable
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.39 x 1.18 x 1.18 inches
Warranty: Six Months
See On Amazon #6
DIYmalls BN-180 GPS Glonass Module TTL NMEA-0183 1Hz 9600bps for Arduino Aircraft RC FPV Drone Flight Control
Asin: B086ZKWYP5 | Ean: 0747356637558 | UPC: 747356637558
Data Level : Ttl Or Rs-232,Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
If You Have Any Problem, Please Do As Follow: Click "Diymalls"(You Can Find "Sold By Diymalls" Under Buy Now Button), In The New Page, Click "Ask A Question"..
Bn 180 Gps Doesn't Have Flash And Compass. If You Need It, Please Check Bn-880 Gps Module Via "Visit The Diymalls Store".
When You Power Up Bn 180 Gps Module The First Time In A New Location, It Always Takes Longer To Find Satillites. This Is Referred To As “Cold Start”. Once You’Ve Done It The First Time, Later When You Restart Bn180 Gps Module, It Will Get A Lock Much Faster..
Features
- BN180 GPS Module can be used with pi, esp32 development board, pc (driver required), drone flight controller etc.
- When you power up bn 180 GPS module the first time in a new location, it always takes longer to find satillites. This is referred to as cold start . Once you ve done it the first time, later when you restart bn180 GPS module, it will get a lock much faster.
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- BN 180 gps doesn't have flash and compass. If you need it, please check bn-880 gps module via Visit the DIYmalls Store
- If you have any problem, please do as follow: click DIYmalls(you can find Sold by DIYmalls under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Dimensions: 0.24 x 0.71 x 0.71 inches | Weight: 0.02 pounds
See On Amazon #7
Geekstory DY-180TTL GPS Receiver Module Dual Glonass GPS Navigation Module TTL Level 9600bps with GPS Antenna for Arduino FPV Aircraft,Replace BN-180 GPS
Asin: B0CGQXNW35
Data Level : Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable..
What You Will Get: 1 X Dy-180Ttl Gps Module, 3 X 4P 1.0Mm Pitch Cable.
This Dy-180Ttl Gps Module Does Not Have Flash And Cannot Be Saved. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
The Pw Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place. Note: Without Pps Output, Only Pps Indicator.
Features
- This DY-180 TTL GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- The PW LED flash means gps module output normally. The PPS LED flash means gps module locate your place. Note: without PPS output, only PPS indicator
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
- This DY-180TTL GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- What you will get: 1 X DY-180TTL GPS Module, 3 X 4P 1.0mm Pitch Cable
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.32 x 2.72 x 1.81 inches
See On Amazon #8
DIYmalls BE-180 GPS Receiver Module TTL 10th Chip 38400bps for Arduino FPV Aircraft CC3D Flight Control, Replace BN-180 GPS
Asin: B0BTM3QRDJ
-Be 180 Module Connection With Flight Control, Usb To Ttl And Develop Board: Gnd To Gnd, Tx To Rx, Rx To Tx, Vcc To 5V..
-The Blue (Tx) Light Flashes When Power On, Indicating There Is Data Output..
-Be-180 Gps Should Be Used Outdoor, And The Antenna Side Facing To The Sky..
-Baud Rate: 4800Bps To 921600Bps, Default 38400Bps( Remember It Is Not 9600Bps)..
Features
- -be180 GPS equiped with 10th chip to replace the bn180 gps, more accurate and receiving signal faster.
- -Baud Rate: 4800bps to 921600bps, default 38400bps( Remember it is NOT 9600bps).
- -be 180 module connection with flight control, usb to ttl and develop board: gnd to gnd, tx to rx, rx to tx, vcc to 5v.
- -be-180 gps should be used outdoor, and the antenna side facing to the sky.
- -The blue (TX) light flashes when power on, indicating there is data output.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Warranty: 30 days
See On Amazon #9
Geekstory DY-880 TTL GPS Receiver Module with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass Beidou for Arduino FPV Aircraft CC3D Flight Control, Replace BN-880 GPS
Asin: B0CGQZRSWJ
Dy-880Ttl Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Next Time When You Use It. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software.
Dits Data Level Is Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
Dy-880Ttl Gps Module Is Dual Module Compass, With And Electronic Compass Ic Hmc5883l.
Features
- DY-880TTL is suitable for Open source flight controller, not for flight control with SCM
- DY-880TTL gps module is dual module compass, with and electronic compass IC HMC5883L
- DY-880TTL gps module has flash to save configuration. So you do not need to reset next time when you use it. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- When you use it for Raspberry Pi, there is no driver needed but you need to install software
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.32 x 2.72 x 1.81 inches
See On Amazon #10
Geekstory USB GPS Module Antenna Supports GPS+GLONASS Beidou Built-in Flash + Waterproof Active GPS Antenna 3V-5V DC, Connectors SMA Male Plug
Asin: B08BBZ8JZ5
Built-In Flash, Free Configuration Product Baud Rate, Output Statement, Output Rate, Second Pulse And Other Parameters.
How To Email Us? Please Click “Geekstory”(You Can Find "Sold By Geekstory" Under Buy Now Button), In The New Page, Click “Ask A Question” To Email Us.
Gps Antenna Dc Voltage: 3V To 5V，Waterproof Rating: Ip65, Ip67.
Supports Gps+Glonass (Default); Gps+Beidou;Glonass+ Beidou Multiple Modes Built-In Lna Signal Amplifier.
Features
- Video link: https://youtu.be/30qJsynTceY
- Supports GPS+GLONASS (default); GPS+Beidou;GLONASS+ BeiDou multiple modes Built-in LNA signal amplifier
- Built-in Flash, free configuration product baud rate, output statement, output rate, second pulse and other parameters
- GPS Antenna DC Voltage: 3V to 5V Waterproof rating: IP65, IP67
- How to email us? Please click Geekstory (you can find Sold by Geekstory under Buy Now button), in the new page, click Ask a question to email us
- See more on Amazon...
Brand: Geekstory
See On Amazon #11
Geekstory BN-880 GPS Module U8 with Flash HMC5883L Compass + CP2102 6 in 1 USB-UART Serial Adapter Module with 4P Dupont Cable Jumper Wire, Female to Female for Windows, Linux, Arduino
Asin: B0B74ZRDQF
Dits Data Level Is Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
Cp2102 Serial Adapter Module Compatible With Windows 7/8/10, Linux, Arduino, Nextion Display, Beitian Gps Module, Esp8266 Transceiver Indicator : When The Serial Line To Send Or Receive Data Lines , The Board Will Receive Indicator Lights For Easy Debugging.
6 In 1 Multifunctional Interface Module Supports Usb To Ttl, Usb To 232, Usb To 485, Ttl To 232, Ttl To 485, 232 To 485. Serial Interface Module Cp2102 Usb Ttl 485 232 Mutual Transfer, Before Using The 6 In 1 Multifunctional Interface Module, You Need To Install The Cp2102 Driver.
Bn 880 Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Next Time When You Use It. When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software.
Features
- Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L. BN-880 is suitable for Open source flight controller, not for flight control with SCM
- Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it. When you use it for Raspberry Pi, there is no driver needed but you need to install software
- DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- 6 in 1 Multifunctional interface module supports USB to TTL, USB to 232, USB to 485, TTL to 232, TTL to 485, 232 to 485. Serial Interface Module CP2102 USB TTL 485 232 Mutual Transfer, Before using the 6 in 1 Multifunctional interface module, you need to install the CP2102 driver
- CP2102 serial adapter module compatible with Windows 7/8/10, Linux, Arduino, nextion display, beitian gps module, ESP8266 Transceiver indicator : When the serial line to send or receive data lines , the board will receive indicator lights for easy debugging
- See more on Amazon...
Brand: Geekstory
See On Amazon #12
Geekstory VK-162 G-Mouse USB GPS Dongle Navigation Module External GPS Antenna Remote Mount USB GPS Receiver+G72 Glonass Beidou GNSS Receiver
Asin: B09MRTMLWD
Vk -162 Is A Magntized Antenna,If Get The Gps Signal,Please Use The Gps Module Outdoor,If You Want To Use The Gps Module Indoor,Please Install Gps Signal Amplifier In Your Room.
G72 Device Defaults To Gps+Beidou, Gps+Glonass Needs To Send Instructions To Change..
G72 Gps Usb Use The Newer Chip(M8130-Kt Chip), Better Than Vk-172 Gps.This Usb Gps Works With Windows, Android, Raspberry Pi, Linux And Google Earth, Not For Ios System. You Need To Install Driver Before Use It On Window, But Plug And Play For Raspberry Pi And Linux..
Vk-162 Gps Support Windows And Linux System, Not For Android And Ios System. It Is Not Plug And Play For Most Device. You Must Install Driver Before Make It Work..
Features
- 1pcs VK-162 G-Mouse USB GPS Dongle Navigation Module + 1pcs G72 G-Mouse USB GPS Dongle Glonass Beidou GNSS Receiver Module
- VK-162 GPS support windows and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work.
- VK -162 is a magntized antenna,if get the GPS signal,please use the GPS module outdoor,If you want to use the GPS module indoor,please install GPS signal amplifier in your room
- G72 gps usb use the newer chip(M8130-KT Chip), better than vk-172 gps.This usb gps works with Windows, Android, Raspberry pi, Linux and Google Earth, not for IOS system. You need to install driver before use it on window, but plug and play for raspberry pi and Linux.
- G72 device defaults to GPS+Beidou, GPS+Glonass needs to send instructions to change.
- See more on Amazon...
Brand: Geekstory
See On Amazon #13
Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps with GPS Passive Antenna+CP2102 6 in 1 USB-UART Serial Adapter Module with 4P Dupont Cable Jumper Wire,Female to Female for Window
Asin: B0B76DLH3N
Data Level : Ttl Or Rs-232,Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
Cp2102 Serial Adapter Module Compatible With Windows 7/8/10, Linux, Arduino, Nextion Display, Beitian Gps Module, Esp8266 Transceiver Indicator : When The Serial Line To Send Or Receive Data Lines , The Board Will Receive Indicator Lights For Easy Debugging.
6 In 1 Multifunctional Interface Module Supports Usb To Ttl, Usb To 232, Usb To 485, Ttl To 232, Ttl To 485, 232 To 485. Serial Interface Module Cp2102 Usb Ttl 485 232 Mutual Transfer, Before Using The 6 In 1 Multifunctional Interface Module, You Need To Install The Cp2102 Driver.
When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software. The Tx Led Flash Means Gps Module Output Normally.The Pps Led Flash Means Gps Module Locate Your Place..
Features
- BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory.
- When you use it for Raspberry Pi, there is no driver needed but you need to install software. The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place.
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- 6 in 1 Multifunctional interface module supports USB to TTL, USB to 232, USB to 485, TTL to 232, TTL to 485, 232 to 485. Serial Interface Module CP2102 USB TTL 485 232 Mutual Transfer, Before using the 6 in 1 Multifunctional interface module, you need to install the CP2102 driver
- CP2102 serial adapter module compatible with Windows 7/8/10, Linux, Arduino, nextion display, beitian gps module, ESP8266 Transceiver indicator : When the serial line to send or receive data lines , the board will receive indicator lights for easy debugging
- See more on Amazon...
Brand: Geekstory
See On Amazon #14
Geekstory BN-180 GPS Module UART TTL Dual Glonass GPS Car Navigation + BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna
Asin: B0B1877R4K
The Tx Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place. This Bn-180 Gps Module Does Not Have Flash And Cannot Be Saved. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
Bn 880 Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Next Time When You Use It. When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software..
Bn-880 Is Suitable For Open Source Flight Controller, Not For Flight Control With Scm, Bn 880 Gps Module Is Dual Module Compass, With And Electronic Compass Ic Hmc5883l..
This Bn-180 Gps Module Can Show Your Speed. When You Use It For Raspberry Pi, There Is No Driver Needed. Here Is Connection With Rpi, Red To 3.3V, Black To Gnd, Green To Txd, White To Rxd..
Features
- 1 PCS BN-180 GPS Module + 1 PCS BN-220 Dual GPS module
- This BN-180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place. This BN-180 GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- BN-880 is suitable for Open source flight controller, not for flight control with SCM, Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L.
- Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it. When you use it for Raspberry Pi, there is no driver needed but you need to install software.
- See more on Amazon...
Brand: Geekstory
See On Amazon #15
Geekstory VK-162 G-Mouse USB GPS Dongle Navigation Module External GPS Antenna Remote Mount USB GPS Receiver+Vk-172 Gmouse USB GPS Glonass
Asin: B09MRRGTV2
Vk -162 Is A Magntized Antenna,If Get The Gps Signal,Please Use The Gps Module Outdoor,If You Want To Use The Gps Module Indoor,Please Install Gps Signal Amplifier In Your Room.
The Vk-172 Gps Is Not Plug And Play For Most Device. You Need To Install Driver Before Make It Work. Raspberry Pi And Linux No Need Driver..
Vk-172 Usb Gps Works With Windows, Linux, Raspberry Pi And Google Earth, Not For Ios Android. Vk-172 Automatically Adapt The Baud Rate. The Baud Rate Has Any Data Output..
Vk-162 Gps Support Windows And Linux System, Not For Android And Ios System. It Is Not Plug And Play For Most Device. You Must Install Driver Before Make It Work..
Features
- 1pcs VK-162 G-Mouse USB GPS Dongle Navigation Module + 1pcs VK-172 Gmouse USB GPS Glonass Dongle Module
- VK-162 GPS support windows and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work.
- VK -162 is a magntized antenna,if get the GPS signal,please use the GPS module outdoor,If you want to use the GPS module indoor,please install GPS signal amplifier in your room
- VK-172 usb gps works with Windows, Linux, Raspberry PI and Google Earth, not for IOS Android. VK-172 automatically adapt the baud rate. The baud rate has any data output.
- The vk-172 gps is NOT plug and play for most device. You need to install driver before make it work. Raspberry Pi and linux no need driver.
- See more on Amazon...
Brand: Geekstory
See On Amazon #16
Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna + BN-880 GPS Module U8 with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass
Asin: B0B18G96XK
The Tx Led Flash Means Gps Module Output Normally.The Pps Led Flash Means Gps Module Locate Your Place. When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software..
Bn 880 Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Next Time When You Use It. When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software..
Bn-880 Is Suitable For Open Source Flight Controller, Not For Flight Control With Scm, Bn 880 Gps Module Is Dual Module Compass, With And Electronic Compass Ic Hmc5883l..
Bn-220 Gps Module Has Flash To Save Configuration, So You Do Not Need To Reset Data Next Time When You Use It. But It Has No Compass. If You Need Gps With Flash And Compass..
Features
- 1 PCS BN-220 Dual GPS module + 1 PCS BN 880 GPS module U8 with Flash HMC5883L Compass.
- BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass.
- The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place. When you use it for Raspberry Pi, there is no driver needed but you need to install software.
- BN-880 is suitable for Open source flight controller, not for flight control with SCM, Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L.
- Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it. When you use it for Raspberry Pi, there is no driver needed but you need to install software.
- See more on Amazon...
Brand: Geekstory
See On Amazon #17
Geekstory BN-180 GPS Module UART TTL Dual Glonass GPS Car Navigation + BN-880 GPS Module U8 with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass
Asin: B0B18BQCV9
The Tx Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place. This Bn-180 Gps Module Does Not Have Flash And Cannot Be Saved. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
Bn 880 Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Next Time When You Use It. When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software..
Bn-880 Is Suitable For Open Source Flight Controller, Not For Flight Control With Scm, Bn 880 Gps Module Is Dual Module Compass, With And Electronic Compass Ic Hmc5883l..
This Bn-180 Gps Module Can Show Your Speed. When You Use It For Raspberry Pi, There Is No Driver Needed. Here Is Connection With Rpi, Red To 3.3V, Black To Gnd, Green To Txd, White To Rxd..
Features
- 1 PCS BN-180 GPS Module + 1 PCS BN-220 Dual GPS module
- This BN-180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place. This BN-180 GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- BN-880 is suitable for Open source flight controller, not for flight control with SCM, Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L.
- Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it. When you use it for Raspberry Pi, there is no driver needed but you need to install software.
- See more on Amazon...
Brand: Geekstory
See On Amazon #18
Geekstory VK-162 G-Mouse USB GPS Dongle Navigation Module External GPS Antenna Remote Mount USB GPS Receiver + BN-880 GPS Module U8 with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass
Asin: B0B185263V
Vk -162 Is A Magntized Antenna,If Get The Gps Signal,Please Use The Gps Module Outdoor,If You Want To Use The Gps Module Indoor,Please Install Gps Signal Amplifier In Your Room..
Bn 880 Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Next Time When You Use It. When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software..
Bn-880 Is Suitable For Open Source Flight Controller, Not For Flight Control With Scm, Bn 880 Gps Module Is Dual Module Compass, With And Electronic Compass Ic Hmc5883l..
Vk-162 Gps Support Windows And Linux System, Not For Android And Ios System. It Is Not Plug And Play For Most Device. You Must Install Driver Before Make It Work..
Features
- 1 PCS VK-162 G-Mouse USB GPS Dongle Navigation Module + 1 PCS BN 880 GPS module U8 with Flash HMC5883L Compass
- VK-162 GPS support windows and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work.
- VK -162 is a magntized antenna,if get the GPS signal,please use the GPS module outdoor,If you want to use the GPS module indoor,please install GPS signal amplifier in your room.
- BN-880 is suitable for Open source flight controller, not for flight control with SCM, Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L.
- Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it. When you use it for Raspberry Pi, there is no driver needed but you need to install software.
- See more on Amazon...
Brand: Geekstory
See On Amazon #19
Geekstory VK-162 G-Mouse USB GPS Dongle Navigation Module External GPS Antenna Remote Mount USB GPS Receiver + BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna
Asin: B0B184NL8L
Vk -162 Is A Magntized Antenna,If Get The Gps Signal,Please Use The Gps Module Outdoor,If You Want To Use The Gps Module Indoor,Please Install Gps Signal Amplifier In Your Room.
The Tx Led Flash Means Gps Module Output Normally.The Pps Led Flash Means Gps Module Locate Your Place. When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software..
Bn-220 Gps Module Has Flash To Save Configuration, So You Do Not Need To Reset Data Next Time When You Use It. But It Has No Compass. If You Need Gps With Flash And Compass..
Vk-162 Gps Support Windows And Linux System, Not For Android And Ios System. It Is Not Plug And Play For Most Device. You Must Install Driver Before Make It Work..
Features
- 1 PCS VK-162 G-Mouse USB GPS Dongle Navigation Module + 1 PCS BN-220 Dual GPS module
- VK-162 GPS support windows and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work.
- VK -162 is a magntized antenna,if get the GPS signal,please use the GPS module outdoor,If you want to use the GPS module indoor,please install GPS signal amplifier in your room
- BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass.
- The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place. When you use it for Raspberry Pi, there is no driver needed but you need to install software.
- See more on Amazon...
Brand: Geekstory
See On Amazon
Looking For Something Else?
Search