BOJACK L298N Motor DC Dual H-Bridge Motor Driver Controller Board Module Stepper for Arduino Intelligent Car Power UNO MEGA R3 Mega2560 with 4pcs
Asin: B0C5JCF5RS | Model: BJ-L298N | PartNumber: BJ-L298N | Ean: 0762917148410 | UPC: 762917148410
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: BOJACK | Manufacturer: BOJACK
Dimensions: 1.00 x 9.00 x 4.00 inches | Weight: 0.07 pounds
See On Amazon Similar To BOJACK L298N Motor DC Dual
#1
KOOBOOK 5Pcs 2.5A Dual Channel DC Motor Driver Mini Module Beyond L298N PWM Speed Control
Asin: B07S39BC5Q | Model: KB018 | PartNumber: KB018 | Ean: 0682559865592 | UPC: 682559865592
Dual 2.5A X 2, Is More Power Than 1.5A Motor-Driven Version. With Built-In Thermal Protection Circuit, Do Not Worry About The Motor Stall Burned, The Temperature Automatically After The Recovery. (Currently On The Market Of Intelligent Car Voltage And Current Are In This Range).
Small Size, Light Weight, 0 Standby Current..
Two-Way H-Bridge Motor Drive, Can Drive Two Dc Motors Or One 4-Wire Two-Phase Stepper Motor At The Same Time..
L298n Internal Transistor Switch, Low Efficiency, High Fever, Need To Heat, Bulky, The Market Is Very Easy To Burn The L298n, Are Not Using The Original Chip, This Product Can Be Replaced..
Features
- Original professional motor drive chip, builting-in low-conduction internal resistance MOS switch, heat is minimal, no heat sink, energy saving, is your ideal choice when you use battery as power supply.
- L298N internal transistor switch, low efficiency, high fever, need to heat, bulky, the market is very easy to burn the L298N, are not using the original chip, this product can be replaced.
- Dual 2.5A x 2, is more power than 1.5A motor-driven version. With built-in thermal protection circuit, do not worry about the motor stall burned, the temperature automatically after the recovery. (Currently on the market of intelligent car voltage and current are in this range)
- Two-way H-bridge motor drive, can drive two DC motors or one 4-wire two-phase stepper motor at the same time.
- Small size, light weight, 0 standby current.
- See more on Amazon...
Brand: KOOBOOK | Manufacturer: KOOBOOK
See On Amazon #2
HiLetgo 4pcs L298N Motor Driver Controller Board Module Stepper Motor DC Dual H-Bridge for Arduino Smart Car Power UNO MEGA R3 Mega2560
Asin: B07BK1QL5T | Model: 3-01-0032-4PCS | PartNumber: 3-01-0032-4PCS
Dual-Channel H-Bridge Driver Working Mode Creates Higher Working Efficiency.
Large Capacity Filter Capacitance, Afterflow Protection Diode, More Stable And Reliable.
To Avoid Damage The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage.
Use Large-Capacity Filter Capacitors And Diode With Freewheeling Protection Function, Increasing Reliability.
Features
- L298N as main driver chip makes strong driving ability/small heating/strong anti-interference/low calorific value
- Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
- Dual-channel H-bridge driver working mode creates higher working efficiency
- To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
- Large capacity filter capacitance, afterflow protection diode, more stable and reliable
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo®
Dimensions: 1.18 x 2.36 x 2.17 inches
See On Amazon #3
KeeYees L298N Motor Drive Controller Board Stepper Motor Control Module Dual H-Bridge with DC Motor and Smart Car Wheel Compatible with Arduino
Asin: B07ZT619TD | Ean: 0744678331003 | UPC: 744678331003
Tt Motor: The Motor Is A Two-Axis Motor With A Reduction Ratio Of 1:48, Which Has Strong Anti-Interference Ability..
To Avoid Damage The Voltage Stabilizing Chip Of Motor Drive Module, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage..
Smart Car Wheels: The Wheels Are Made Of High-Strength Plastic And The Tires Are Made Of Durable Black Rubber..
Motor Drive Controller: L298n Used As The Main Driver Chip. It Has The Strong Driving Ability, Low Calorific Value And Strong Anti-Interference Ability..
Features
- This is a good parts kit for RC car project. It not only comes with 4pcs wheels and motors, but also 2pcs motor drive modules and 60pcs jumper wires, which are very useful accessories for your project.
- Motor Drive Controller: L298N used as the main driver chip. It has the strong driving ability, low calorific value and strong anti-interference ability.
- TT Motor: The motor is a two-axis motor with a reduction ratio of 1:48, which has strong anti-interference ability.
- Smart Car Wheels: The wheels are made of high-strength plastic and the tires are made of durable black rubber.
- To avoid damage the voltage stabilizing chip of Motor Drive Module, please use an external 5V logic supply when using more than 12V driving voltage.
- See more on Amazon...
Brand: KeeYees | Manufacturer: KeeYees
See On Amazon #4
BOJACK 4 Pcs Type 130 EK1450 1 V- 6 V Volt Miniature DC Toy Motors for Arduino Hobby DIY Projects
Asin: B09FPXF1QK | Model: Type 130 EK1450 / 4 Pcs | PartNumber: Type 130 EK1450 / 4 Pcs | Ean: 0762917044798 | UPC: 762917044798
[Convenient Use] The Motor Is Equipped With A 15 Cm (6 Inch) Male Dupont Jumper Wire, Which Can Be Directly Connected To The Equipment For Use, Which Is Very Convenient..
[Product Features] Low Noise, Stable Operation, High Torque And Strong Power..
[Wide Application] It Can Be Widely Used In Fans, Solar/Battery Driven Toy Cars, Hair Dryers, Robot Projects, Scientific Experiments, Etc..
[Motor Size] 15 X 20 Mm (0.59X0.79 Inch), Shaft Diameter: 2.0 Mm (0.079 Inch), Shaft Length: 9 Mm (0.35 Inch).
Features
- [Product parameters] Reference voltage: 1V-6V, reference current: 0.35A-0.4A, speed: 16000 RPM (3V)
- [Motor size] 15 x 20 mm (0.59x0.79 inch), shaft diameter: 2.0 mm (0.079 inch), shaft length: 9 mm (0.35 inch)
- [Convenient use] The motor is equipped with a 15 CM (6 inch) male dupont jumper wire, which can be directly connected to the equipment for use, which is very convenient.
- [Wide application] It can be widely used in fans, solar/battery driven toy cars, hair dryers, robot projects, scientific experiments, etc.
- [Product features] Low noise, stable operation, high torque and strong power.
- See more on Amazon...
Brand: BOJACK | Manufacturer: BOJACK
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.04 pounds
See On Amazon #5
VKLSVAN 2 PCS L298N Motor DC Stepper Motor Driver Controller Board Module Dual H Bridge for Arduino
Asin: B0CLYBPGP9
【High Reliability】Use Large-Capacity Filter Capacitors And Diode With Freewheeling Protection Function, Increasing Reliability..
【Warm Tips】To Avoid Damage The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage..
【Main Parameters】Drive Voltage: 5V-35V, Drive Current: 2A (Max Single Bridge),Maximum Power: 25W, Logic Current 0Ma-36Ma,Operating Mode: H-Bridge Driver (Dual)..
【High Efficiency】Dual-Channel H-Bridge Driver Working Mode Creates Higher Working Efficiency..
Features
- High Quality Chip L298N as main driver chip, strong driving ability/small heating/strong anti-interference/low calorific value,can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
- High Efficiency Dual-channel H-bridge driver working mode creates higher working efficiency.
- High Reliability Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability.
- Main Parameters Drive voltage: 5V-35V, Drive current: 2A (MAX single bridge),Maximum power: 25W, Logic current 0mA-36mA,Operating mode: H-bridge driver (dual).
- Warm Tips To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
- See more on Amazon...
Brand: VKLSVAN | Manufacturer: VKLSVAN
See On Amazon #6
DROK DC Motor Driver 2pcs, L298 Dual H Bridge Motor Speed Controller DC 6.5V-27V 7A PWM Motor Regulator Board 12V 24V Electric Motor Control Module Industrial 160W with Optocoupler Isolation
Asin: B0D11B8727
Forward And Revsersely Rotate: The In1, In2/In3, In4 Port Can Control Forward Or Reverse Motor Rotation..
Under Voltage Protection: The Motor Driver Module Is With Under Voltage Protection To Prevent Instantaneous Large Current From Damaging The Module..
Pwm Speed Control: Enable Signal Terminal (Ena) Input Pwm Can Regulate Speed, Pwm Frequency Range 0-10Khz..
Strong Drive: The Motor Controller Board Adopts Dual H Bridge, Can Drive Two Dc Motors At The Same Time..
Features
- DROK DC motor driver input voltage range is DC 6.5V-27V, can be input DC 12V or 24V, rated output current of each port is 7A, total output power is 160W.
- STRONG DRIVE: the motor controller board adopts dual H bridge, can drive two DC motors at the same time.
- FORWARD and REVSERSELY ROTATE: the IN1, IN2/IN3, IN4 port can control forward or reverse motor rotation.
- PWM SPEED CONTROL: enable signal terminal (ENA) input PWM can regulate speed, PWM frequency range 0-10KHZ.
- UNDER VOLTAGE PROTECTION: the motor driver module is with under voltage protection to prevent instantaneous large current from damaging the module.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
See On Amazon #7
WWZMDiB L298N Stepper Motor DC Dual H-Bridge Driver Controller Board Module for Arduino Raspberry Pi (2Pcs L298N)
Asin: B0CR6BX5QL | Model: L298N | PartNumber: L298N | Ean: 0705252405800 | UPC: 705252405800
⚡【Logic Voltage】：5V(Current 0Ma-36Ma).
⚡【Maximum Power】: 25W.
⚡【Drive Voltage】: 5V-35V(Current: 2A (Max Single Bridge).
🎯【Operating Mode】: H-Bridge Driver (Dual).
Features
- L298N Motor Driver Controller Board Module :L298N as main chip. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
- Operating mode : H-bridge driver (dual)
- Logic voltage 5V(current 0mA-36mA)
- Drive voltage : 5V-35V(current: 2A (MAX single bridge)
- Maximum power : 25W
- See more on Amazon...
Brand: WWZMDiB | Manufacturer: WWZMDiB
See On Amazon #8
Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino
Asin: B014KMHSW6 | Model: CECOMINOD012186 | PartNumber: CECOMINOD012186 | Ean: 0735090644130, 6930864920920, 0783325944715 | UPC: 783325944715, 735090644130
Use Large-Capacity Filter Capacitors And Diode With Freewheeling Protection Function, Increasing Reliability.
Large Capacity Filter Capacitance,Afterflow Protection Diode, More Stable And Reliable..
High Working Power To 35V,Large Current Can Reach 3A Max And Continue Current Is 2A, Power To 25W..
To Avoid Damage The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage.
Features
- Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
- To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
- Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
- High working power to 35v,large current can reach 3A MAX and continue current is 2A, power to 25w.
- Large capacity filter capacitance,afterflow protection diode, more stable and reliable.
- See more on Amazon...
Brand: Qunqi | Manufacturer: Qunqi
Dimensions: 0.75 x 1.14 x 0.98 inches | Weight: 0.07 pounds
See On Amazon #9
Qunqi 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino
Asin: B01M29YK5U | Model: MK-050-2 | PartNumber: MK-050-2 | Ean: 6941595310874
Use Large-Capacity Filter Capacitors And Diode With Freewheeling Protection Function, Increasing Reliability.
Large Capacity Filter Capacitance,Afterflow Protection Diode, More Stable And Reliable..
High Working Power To 35V,Large Current Can Reach 3A Max And Continue Current Is 2A, Power To 25W..
To Avoid Damage The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage.
Features
- Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
- To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
- Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
- High working power to 35v,large current can reach 3A MAX and continue current is 2A, power to 25w.
- Large capacity filter capacitance,afterflow protection diode, more stable and reliable.
- See more on Amazon...
Brand: Qunqi | Manufacturer: Qunqi
Dimensions: 1.06 x 1.69 x 1.69 inches | Weight: 0.11 pounds
See On Amazon #10
AITRIP 2PCS L298N Motor Drive Controller Board Stepper Motor Control Module Dual H-Bridge with 4 sets DC Motor and Smart Car Wheel Compatible with Arduino
Asin: B08JLYY77W | Ean: 0701715444034 | UPC: 701715444034
To Avoid Damage The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage.
A Good Parts Kit For An Arduino And Raspberry Pi Based Rc Car Project..
Smart Car Wheels: The Wheels Are Made Of High-Strength Plastic And The Tires Are Made Of Durable Black Rubber ; Tt Motor: The Motor Is A Two-Axis Motor With A Reduction Ratio Of 1:48, Which Has Strong Anti-Interference Ability..
Dual-Channel H-Bridge Driver Working Mode Creates Higher Working Efficiency.
Features
- Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability,low calorific value and strong anti-interference ability.
- Dual-channel H-bridge driver working mode creates higher working efficiency
- To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
- Smart Car Wheels: The wheels are made of high-strength plastic and the tires are made of durable black rubber ; TT Motor: The motor is a two-axis motor with a reduction ratio of 1:48, which has strong anti-interference ability.
- A good parts kit for an Arduino and raspberry pi based RC car project.
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon #11
DAOKI 2 PCS L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control and Drives Module for Arduino Smart Car Power UNO MEGA R3 Mega2560 with Dupont Cable
Asin: B085XSLKFQ | Model: DR-US-254 | PartNumber: DR-US-254 | Ean: 6431773211128
Driving Dc Motor Because The Module Is Drived By Double H Bridge,It Can Drive Two Motors Simultaneously..
Package Content: 2 X L298n Motor Drive Controller Board, 1 X 11.8" Male-Female Dupont Cables 12 Pin, 1 X 19.6" 28Awg Wire.
Input The Following Driving Timing From In1-In4 Then The Speed And Direction Of The Stepper Motor Can Be Controlled.
The Connecting Method Is Shown Inbelow Figure After Enable Ena Enb.
Features
- The signal is shown in the figure
- The connecting method is shown inbelow figure after enable ENA ENB
- Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.
- Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled
- Package Content: 2 x L298N Motor Drive Controller Board, 1 x 11.8 male-FeMale Dupont Cables 12 PIN, 1 x 19.6 28AWG Wire
- See more on Amazon...
Brand: DAOKI | Manufacturer: DAOKI
Weight: 0.00 pounds
See On Amazon #12
WMYCONGCONG 5 PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper Module
Asin: B06X9D1PR9 | Model: WGCD | PartNumber: WGCD | Ean: 0602914545525 | UPC: 602914545525
Size: 43 * 43 * 27 Mm/1.69 * 1.49 * 1.06In.
Package: 5 Pcs L298n Motor Controller Board Module..
With Built-In 78M05 To Supply Power, To Avoid The Damage Of Voltage Regulator Chip, When The Driving Voltage Is Greater Than 12V, Please Use The External 5V Logic Power Supply..
Dual H Bridge Dc Stepper Module, More Stable And Higher Work Efficiency..
Features
- L298N main driving chip, high drive ability, small heating value, strong anti-interference capability.
- Dual H bridge DC stepper module, more stable and higher work efficiency.
- Size: 43 * 43 * 27 mm/1.69 * 1.49 * 1.06in
- With built-in 78M05 to supply power, to avoid the damage of voltage regulator chip, when the driving voltage is greater than 12V, please use the external 5V logic power supply.
- Package: 5 pcs L298N motor controller board module.
- See more on Amazon...
Brand: WMYCONGCONG | Manufacturer: WGCD 1
Weight: 0.07 Pounds
See On Amazon #13
Kyuionty DC Motor Driver L298 DC 6.5V-27V 7A Dual H Bridge Motor Speed Controller PWM Motor Regulator Board 12V 24V Motor Control Module Industrial with Optocoupler Isolation, 160W
Asin: B08FC1851N | Model: JL0136-1 | PartNumber: JL0136-1 | Ean: 0779584514899 | UPC: 779584514899
Forward & Reverse Rotation: In1, In2/In3, In4 Ports Can Control The Forward Or Reverse Rotation Of The Motor..
Undervoltage Protection: The Motor Driver Module Has Undervoltage Protection To Prevent The Instantaneous Large Current From Damaging The Module..
Pwm Speed Control: Enable The Signal Terminal (Ena) Input Pwm To Adjust The Speed, Pwm Frequency Range 0-10Khz..
Strong Drive: The Motor Control Board Adopts Double H Bridge, Which Can Drive Two Dc Motors At The Same Time..
Features
- The input voltage range of the DC motor driver is DC 6.5V-27V, DC 12V or 24V can be input, the rated output current of each port is 7A, and the total output power is 160W.
- Strong Drive: The motor control board adopts double H bridge, which can drive two DC motors at the same time.
- Forward & Reverse Rotation: IN1, IN2/IN3, IN4 ports can control the forward or reverse rotation of the motor.
- PWM Speed Control: enable the signal terminal (ENA) input PWM to adjust the speed, PWM frequency range 0-10KHZ.
- Undervoltage Protection: The motor driver module has undervoltage protection to prevent the instantaneous large current from damaging the module.
- See more on Amazon...
Brand: Kyuionty | Manufacturer: Kyuionty
See On Amazon #14
12pcs L298N Motor Drive Controller Board Module Stepper Motor DC Dual H Bridge for Arduino Smart Car Power UNO MEGA R3 Mega2560 with Jumper Wires
Asin: B0BNBC5LLZ | Ean: 0701715468290 | UPC: 701715468290
High Efficient: Dual-Channel H-Bridge Driver Design, Can Directly Drive Two 3-30V Dc Motor, Or One 2-Phase Stepper Motor, One 4-Phase Stepper Motor, Working Power Up To 35V, High Current Can Reach 3A Max, Continuous Current Is 2A, Power Up To 25W, Which Created Higher Efficiency..
Package Content: You Will Get 12Pcs L298n Motor Drive Controller Board With Dupont Wire..
Using Large Capacity Filter Capacitor,This Module Can Follow Current To Protect Diodes,And Improve The Reliability..
This Module Can Use Built-In 78M05 For Electric Work Via A Driving Power Supply Part.But To Avoid The Damage Of The Voltage Stabilizing Chip,Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage..
Features
- L298N Motor Driver: L298N as the main driver chip, the module has such characteristics as strong driving ability,low calorific value and strong anti-interference ability.
- This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage of the voltage stabilizing chip,please use an external 5V logic supply when using more than 12V driving voltage.
- High efficient: dual-channel H-bridge driver design, can directly drive two 3-30V DC motor, or one 2-phase stepper motor, one 4-phase stepper motor, working power up to 35v, high current can reach 3A MAX, continuous current is 2A, power up to 25w, which created higher efficiency.
- Using large capacity filter capacitor,this module can follow current to protect diodes,and improve the reliability.
- Package content: you will get 12pcs L298N motor drive controller board with dupont wire.
- See more on Amazon...
Brand: AOICRIE | Manufacturer: AOICRIE
See On Amazon #15
AITIAO 2Pcs L298 Dual H Bridge Motor Speed Controller 160W 12V 24V DC Motor Driver DC 6.5V-27V 7A PWM Motor Regulator Board Electric Motor Control Module Industrial with Optocoupler Isolation
Asin: B0B5TWRP9R | Model: 00849-2PCS | PartNumber: 00849-2PCS | Ean: 0701715517134 | UPC: 701715517134
Pwm Speed Control: Enable The Signal Terminal (Ena) Input Pwm To Adjust The Speed, Pwm Frequency Range 0-10Khz..
Single Optocoupler Isolation Input, The Motor Driver Module Is With Under Voltage Protection To Prevent Instantaneous Large Current From Damaging The Module..
Forward & Reverse Rotation: In1, In2/In3, In4 Ports Can Control The Forward Or Reverse Rotation Of The Motor..
The Aitiao Motor Controller Board Adopts Dual H Bridge, Single 7A Current, High Power, Can Drive Two Dc Motors At The Same Time..
Features
- Input Voltage Range: The input voltage range of the DC motor driver is DC 6.5V-27V. It can input DC 12V or 24V. The rated output current of each port is 7A, and the total output power is 160W.
- The AITIAO motor controller board adopts dual H bridge, single 7A current, high power, can drive two DC motors at the same time.
- PWM Speed Control: enable the signal terminal (ENA) input PWM to adjust the speed, PWM frequency range 0-10KHZ.
- Forward & Reverse Rotation: IN1, IN2/IN3, IN4 ports can control the forward or reverse rotation of the motor.
- Single optocoupler isolation input, the motor driver module is with under voltage protection to prevent instantaneous large current from damaging the module.
- See more on Amazon...
Brand: AITIAO | Manufacturer: AITIAO
See On Amazon #16
Honbay L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control & Drives Module for Arduino Smart Car Power UNO MEGA R3 Mega2560 Duemilanove Nano Robo
Asin: B01CC8XI60 | Model: L298N-1P | PartNumber: L298N-1P | Ean: 6957316621754
Dual-Channel H-Bridge Driver Working Mode Creates Higher Working Efficiency.
This Module Can Use Built-In 78M05 For Electric Work Via A Driving Power Supply Part. But To Avoid The Damage Of The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage.
Using Large Capacity Filter Capacitor, This Module Can Follow Current To Protect Diodes, And Improve The Reliability.
L298n As Main Driver Chip Makes Strong Driving Ability/Small Heating/Strong.
Features
- L298N has such characteristics as strong driving ability, low calorific value and strong anti-interference ability
- L298N as main driver chip makes strong driving ability/small heating/strong
- Dual-channel H-bridge driver working mode creates higher working efficiency
- Using large capacity filter capacitor, this module can follow current to protect diodes, and improve the reliability
- This module can use built-in 78M05 for electric work via a driving power supply part. But to avoid the damage of the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
- See more on Amazon...
Brand: Honbay | Manufacturer: Honbay
Weight: 0.00 Pounds
See On Amazon #17
ShillehTek L298N Motor Driver Controller Board Module for Stepper Motor & DC Dual H-Bridge | Compatible with Raspberry Pi, Arduino, Smart Car Projects, Power UNO, MEGA R3, Mega2560
Asin: B0CW243ND1
[Wide Compatibility]: Seamlessly Integrates With Raspberry Pi, Arduino Uno, Mega, R3, Mega2560, And Other Microcontroller Platforms, Ensuring Your Projects Are Not Just Versatile But Also Innovative..
[User-Friendly]: Designed With Hobbyists And Professionals In Mind, The L298n Module Features Easy-To-Connect Terminals And Signal Inputs, Making Setup Quick And Straightforward, Even For Beginners..
[High-Voltage Operation]: Capable Of Operating At Voltages Up To 46V, This Motor Driver Can Handle A Substantial Current Load Of Up To 2A Per Channel, Providing The Power You Need For More Demanding Applications..
[Dual H-Bridge Design]: With Its Dual H-Bridge Configuration, This Module Allows For Independent Control Of Two Motors Simultaneously, Offering Both Direction And Speed Control For A More Dynamic And Flexible Operation..
Features
- [VERSATILE MOTOR CONTROL]: The ShillehTek L298N Motor Driver Controller Board is engineered for precision control of both stepper and DC motors, making it a perfect fit for a wide range of projects including smart cars, robotics, and automation systems.
- [DUAL H-BRIDGE DESIGN]: With its dual H-bridge configuration, this module allows for independent control of two motors simultaneously, offering both direction and speed control for a more dynamic and flexible operation.
- [WIDE COMPATIBILITY]: Seamlessly integrates with Raspberry Pi, Arduino UNO, MEGA, R3, Mega2560, and other microcontroller platforms, ensuring your projects are not just versatile but also innovative.
- [HIGH-VOLTAGE OPERATION]: Capable of operating at voltages up to 46V, this motor driver can handle a substantial current load of up to 2A per channel, providing the power you need for more demanding applications.
- [USER-FRIENDLY]: Designed with hobbyists and professionals in mind, the L298N module features easy-to-connect terminals and signal inputs, making setup quick and straightforward, even for beginners.
- See more on Amazon...
Brand: ST SHILLEHTEK | Manufacturer: Robotlink
Weight: 0.01 pounds
See On Amazon #18
4 Pack L298N Motor Driver Controller Board Module Stepper Motor DC Dual H-Bridge for Arduino Smart Car Power UNO MEGA R3 Mega2560
Asin: B09Y658HF1 | Ean: 0768470326142 | UPC: 768470326142
Use Large-Capacity Filter Capacitors And Diode With Freewheeling Protection Function, Increasing Reliability..
Large Capacity Filter Capacitance,Afterflow Protection Diode, More Stable And Reliable..
High Working Power To 46V,Large Current Can Reach 3A Max And Continue Current Is 2A, Power To 25W..
Dual-Channel H-Bridge Driver Working Mode Creates Higher Working Efficiency,L298n As Main Chip, Can Drive One 2-Phase Stepper Motor, One 4-Phase Stepper Motor Or Two Dc Motors..
Features
- This is a good Motor Drive for an Arduino and raspberry pi based RC car project. It comes with 4pcs motor drive modules awhich can meet your project needs.
- Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
- Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability.
- High working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w.
- Large capacity filter capacitance,afterflow protection diode, more stable and reliable.
- See more on Amazon...
Brand: Azuocn | Manufacturer: Azuocn
See On Amazon #19
HiLetgo L298P DC Motor Drive Module L298P DC Motor Drive Shield H-Bridge Drive Expansion Board High-Power DC Stepper Motor Controller for Arduino
Asin: B07RNLG3HB
Adopt Dedicated High-Power Motor Driver Chip L298p Which Can Directly Drive Two Dc Motors With Drive Current Up To 2A..
Adopt Dedicated High-Power Motor Driver Chip L298p Which Can Directly Drive Two Dc Motors With Drive Current Up To 2A..
Stack Design Can Be Directly Plugged Into The Arduino, Easier To Use..
The L298p Shield Dc Motor Driver Has Pwm Speed Control Mode; Dual High-Power H-Bridge Driver..
Features
- Driven part of the input voltage VS: VIN Input 6.5 ~ 12V, PWRIN 4.8 ~ 35V input.
- The L298P shield DC motor driver has PWM speed control mode; dual high-power H-bridge driver.
- Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A.
- Stack design can be directly plugged into the Arduino, easier to use.
- Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon
Looking For Something Else?
Search