DAOKI 2 PCS L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control and Drives Module for Arduino Smart Car Power UNO MEGA R3 Mega2560 with Dupont Cable
Asin: B085XSLKFQ | Model: DR-US-254 | PartNumber: DR-US-254 | Ean: 6431773211128
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Driving Dc Motor Because The Module Is Drived By Double H Bridge,It Can Drive Two Motors Simultaneously..
Package Content: 2 X L298n Motor Drive Controller Board, 1 X 11.8" Male-Female Dupont Cables 12 Pin, 1 X 19.6" 28Awg Wire.
Input The Following Driving Timing From In1-In4 Then The Speed And Direction Of The Stepper Motor Can Be Controlled.
The Connecting Method Is Shown Inbelow Figure After Enable Ena Enb.
Features
- The signal is shown in the figure
- The connecting method is shown inbelow figure after enable ENA ENB
- Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.
- Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled
- Package Content: 2 x L298N Motor Drive Controller Board, 1 x 11.8 male-FeMale Dupont Cables 12 PIN, 1 x 19.6 28AWG Wire
- See more on Amazon...
Brand: DAOKI | Manufacturer: DAOKI
Weight: 0.00 Pounds
See On Amazon Similar To DAOKI 2 PCS L298N Motor
#1
BOJACK L298N Motor DC Dual H-Bridge Motor Driver Controller Board Module Stepper for Arduino Intelligent Car Power UNO MEGA R3 Mega2560 with 4pcs
Asin: B0C5JCF5RS | Model: BJ-L298N | PartNumber: BJ-L298N | Ean: 0762917148410 | UPC: 762917148410
Brand: BOJACK | Manufacturer: BOJACK
Dimensions: 1.00 x 9.00 x 4.00 inches | Weight: 0.07 Pounds
See On Amazon #2
HiLetgo 4pcs L298N Motor Driver Controller Board Module Stepper Motor DC Dual H-Bridge for Arduino Smart Car Power UNO MEGA R3 Mega2560
Asin: B07BK1QL5T | Model: 3-01-0032-4PCS | PartNumber: 3-01-0032-4PCS
Dual-Channel H-Bridge Driver Working Mode Creates Higher Working Efficiency.
Large Capacity Filter Capacitance, Afterflow Protection Diode, More Stable And Reliable.
To Avoid Damage The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage.
Use Large-Capacity Filter Capacitors And Diode With Freewheeling Protection Function, Increasing Reliability.
Features
- L298N as main driver chip makes strong driving ability/small heating/strong anti-interference/low calorific value
- Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
- Dual-channel H-bridge driver working mode creates higher working efficiency
- To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
- Large capacity filter capacitance, afterflow protection diode, more stable and reliable
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo®
Dimensions: 1.18 x 2.36 x 2.17 inches
See On Amazon #3
VKLSVAN 2 PCS L298N Motor DC Stepper Motor Driver Controller Board Module Dual H Bridge for Arduino
Asin: B0CLYBPGP9
【High Reliability】Use Large-Capacity Filter Capacitors And Diode With Freewheeling Protection Function, Increasing Reliability..
【Warm Tips】To Avoid Damage The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage..
【Main Parameters】Drive Voltage: 5V-35V, Drive Current: 2A (Max Single Bridge),Maximum Power: 25W, Logic Current 0Ma-36Ma,Operating Mode: H-Bridge Driver (Dual)..
【High Efficiency】Dual-Channel H-Bridge Driver Working Mode Creates Higher Working Efficiency..
Features
- High Quality Chip L298N as main driver chip, strong driving ability/small heating/strong anti-interference/low calorific value,can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
- High Efficiency Dual-channel H-bridge driver working mode creates higher working efficiency.
- High Reliability Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability.
- Main Parameters Drive voltage: 5V-35V, Drive current: 2A (MAX single bridge),Maximum power: 25W, Logic current 0mA-36mA,Operating mode: H-bridge driver (dual).
- Warm Tips To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
- See more on Amazon...
Brand: VKLSVAN | Manufacturer: VKLSVAN
See On Amazon #4
KeeYees L298N Motor Drive Controller Board Stepper Motor Control Module Dual H-Bridge with DC Motor and Smart Car Wheel Compatible with Arduino
Asin: B07ZT619TD | Ean: 0744678331003 | UPC: 744678331003
Tt Motor: The Motor Is A Two-Axis Motor With A Reduction Ratio Of 1:48, Which Has Strong Anti-Interference Ability..
To Avoid Damage The Voltage Stabilizing Chip Of Motor Drive Module, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage..
Smart Car Wheels: The Wheels Are Made Of High-Strength Plastic And The Tires Are Made Of Durable Black Rubber..
Motor Drive Controller: L298n Used As The Main Driver Chip. It Has The Strong Driving Ability, Low Calorific Value And Strong Anti-Interference Ability..
Features
- This is a good parts kit for RC car project. It not only comes with 4pcs wheels and motors, but also 2pcs motor drive modules and 60pcs jumper wires, which are very useful accessories for your project.
- Motor Drive Controller: L298N used as the main driver chip. It has the strong driving ability, low calorific value and strong anti-interference ability.
- TT Motor: The motor is a two-axis motor with a reduction ratio of 1:48, which has strong anti-interference ability.
- Smart Car Wheels: The wheels are made of high-strength plastic and the tires are made of durable black rubber.
- To avoid damage the voltage stabilizing chip of Motor Drive Module, please use an external 5V logic supply when using more than 12V driving voltage.
- See more on Amazon...
Brand: KeeYees | Manufacturer: KeeYees
See On Amazon #5
Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino
Asin: B014KMHSW6 | Model: CECOMINOD012186 | PartNumber: CECOMINOD012186 | Ean: 0735090644130, 6930864920920, 0783325944715 | UPC: 783325944715, 735090644130
Use Large-Capacity Filter Capacitors And Diode With Freewheeling Protection Function, Increasing Reliability.
Large Capacity Filter Capacitance,Afterflow Protection Diode, More Stable And Reliable..
High Working Power To 35V,Large Current Can Reach 3A Max And Continue Current Is 2A, Power To 25W..
To Avoid Damage The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage.
Features
- Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
- To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
- Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
- High working power to 35v,large current can reach 3A MAX and continue current is 2A, power to 25w.
- Large capacity filter capacitance,afterflow protection diode, more stable and reliable.
- See more on Amazon...
Brand: Qunqi | Manufacturer: Qunqi
Dimensions: 0.75 x 1.14 x 0.98 inches | Weight: 0.07 Pounds
See On Amazon #6
Diitao 2pcs L298N Motor Drive Controller Board Module Stepper Motor TT Motor Control Module Dual H-Bridge with 4pcs DC Motor and Smart Car Wheel for Arduino
Asin: B0BBF4HLT5 | Ean: 0687117702883 | UPC: 687117702883
L298n Main Chip: With Dual-Channel H-Bridge Drive Working Mode,It Has Higher Working Efficiency,Which Can Drive A 2-Phase Stepper Motor, A 4-Phase Stepper Motor Or 2 Dc Motors..
Application: Suitable For Electric Fans, Electronic Machinery, Toys, Cars And So On..
Package: 4 Wheels +4 Motors +2 Motor Drive Modules +60 Jumpers..
Working Power :35V;High Current :3A Max,Continuous Current Is 2A;Power:25W.To Avoid Damaging The Voltage Regulator Chip,Use An External 5V Logic Power Supply When The Drive Voltage Is Higher Than 12V..
Tt Motor:With Strong Anti-Interference Ability, Strong Driving Ability, Suitable For Inserting Breadboard Or Patch Board..
Features
- Material: Plastic;Tire diameter:65mm;Tire width:26mm;Operating voltage:3V~12VDC.(Recommended operating voltage of 6~8V)
- TT motor:With strong anti-interference ability, strong driving ability, suitable for inserting breadboard or patch board.
- L298N main chip: With dual-channel H-bridge drive working mode,it has higher working efficiency,which can drive a 2-phase stepper motor, a 4-phase stepper motor or 2 DC motors.
- Working power :35V;High current :3A MAX,continuous current is 2A;Power:25w.To avoid damaging the voltage regulator chip,use an external 5V logic power supply when the drive voltage is higher than 12V.
- Application: Suitable for electric fans, electronic machinery, toys, cars and so on.
- Package: 4 wheels +4 motors +2 motor drive modules +60 jumpers.
- See more on Amazon...
Brand: Diitao | Manufacturer: Diitao
Dimensions: 1.06 x 1.69 x 1.69 inches
Warranty: 2 YEARS
See On Amazon #7
AITRIP 2PCS L298N Motor Drive Controller Board Stepper Motor Control Module Dual H-Bridge with 4 sets DC Motor and Smart Car Wheel Compatible with Arduino
Asin: B08JLYY77W | Ean: 0701715444034 | UPC: 701715444034
To Avoid Damage The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage.
A Good Parts Kit For An Arduino And Raspberry Pi Based Rc Car Project..
Smart Car Wheels: The Wheels Are Made Of High-Strength Plastic And The Tires Are Made Of Durable Black Rubber ; Tt Motor: The Motor Is A Two-Axis Motor With A Reduction Ratio Of 1:48, Which Has Strong Anti-Interference Ability..
Dual-Channel H-Bridge Driver Working Mode Creates Higher Working Efficiency.
Features
- Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability,low calorific value and strong anti-interference ability.
- Dual-channel H-bridge driver working mode creates higher working efficiency
- To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
- Smart Car Wheels: The wheels are made of high-strength plastic and the tires are made of durable black rubber ; TT Motor: The motor is a two-axis motor with a reduction ratio of 1:48, which has strong anti-interference ability.
- A good parts kit for an Arduino and raspberry pi based RC car project.
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon #8
Qunqi 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino
Asin: B01M29YK5U | Model: MK-050-2 | PartNumber: MK-050-2 | Ean: 6941595310874
Use Large-Capacity Filter Capacitors And Diode With Freewheeling Protection Function, Increasing Reliability.
Large Capacity Filter Capacitance,Afterflow Protection Diode, More Stable And Reliable..
High Working Power To 35V,Large Current Can Reach 3A Max And Continue Current Is 2A, Power To 25W..
To Avoid Damage The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage.
Features
- Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
- To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
- Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
- High working power to 35v,large current can reach 3A MAX and continue current is 2A, power to 25w.
- Large capacity filter capacitance,afterflow protection diode, more stable and reliable.
- See more on Amazon...
Brand: Qunqi | Manufacturer: Qunqi
Dimensions: 1.06 x 1.69 x 1.69 inches | Weight: 0.11 Pounds
See On Amazon #9
DIYables L298N Motor Driver Module for Arduino, ESP32, ESP8266, Raspberry Pi, 2 Pieces
Asin: B0BPG7PYY5 | Model: DIY-L298N | PartNumber: DIY-L298N
Drive Voltage: 5Vdc - 35Vdc, Drive Current: 2A.
L298n Module Works With Arduino, Esp32, Esp8266, Raspberry Pi, Or Any 5V Or 3.3V Microcontroller..
Tutorials For L298n With Arduino And Esp32 Are Provided.
L298n Module Can Controls One Stepper Motor, Two Dc Motors, Or Two Linear Actuators.
Features
- L298N Dual-channel H-bridge driver: 2 pieces
- L298N module can controls one stepper motor, two DC motors, or two linear actuators
- Drive voltage: 5VDC - 35VDC, Drive current: 2A
- Tutorials for L298N with Arduino and ESP32 are provided
- L298N Module works with Arduino, ESP32, ESP8266, Raspberry Pi, or any 5V or 3.3V microcontroller.
- See more on Amazon...
Brand: DIYables | Manufacturer: DIYables
See On Amazon #10
HiLetgo L298P DC Motor Drive Module L298P DC Motor Drive Shield H-Bridge Drive Expansion Board High-Power DC Stepper Motor Controller for Arduino
Asin: B07RNLG3HB
Adopt Dedicated High-Power Motor Driver Chip L298p Which Can Directly Drive Two Dc Motors With Drive Current Up To 2A..
Adopt Dedicated High-Power Motor Driver Chip L298p Which Can Directly Drive Two Dc Motors With Drive Current Up To 2A..
Stack Design Can Be Directly Plugged Into The Arduino, Easier To Use..
The L298p Shield Dc Motor Driver Has Pwm Speed Control Mode; Dual High-Power H-Bridge Driver..
Features
- Driven part of the input voltage VS: VIN Input 6.5 ~ 12V, PWRIN 4.8 ~ 35V input.
- The L298P shield DC motor driver has PWM speed control mode; dual high-power H-bridge driver.
- Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A.
- Stack design can be directly plugged into the Arduino, easier to use.
- Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #11
4 Pack L298N Motor Driver Controller Board Module Stepper Motor DC Dual H-Bridge for Arduino Smart Car Power UNO MEGA R3 Mega2560
Asin: B09Y658HF1 | Ean: 0768470326142 | UPC: 768470326142
Use Large-Capacity Filter Capacitors And Diode With Freewheeling Protection Function, Increasing Reliability..
Large Capacity Filter Capacitance,Afterflow Protection Diode, More Stable And Reliable..
High Working Power To 46V,Large Current Can Reach 3A Max And Continue Current Is 2A, Power To 25W..
Dual-Channel H-Bridge Driver Working Mode Creates Higher Working Efficiency,L298n As Main Chip, Can Drive One 2-Phase Stepper Motor, One 4-Phase Stepper Motor Or Two Dc Motors..
Features
- This is a good Motor Drive for an Arduino and raspberry pi based RC car project. It comes with 4pcs motor drive modules awhich can meet your project needs.
- Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
- Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability.
- High working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w.
- Large capacity filter capacitance,afterflow protection diode, more stable and reliable.
- See more on Amazon...
Brand: Azuocn | Manufacturer: Azuocn
See On Amazon #12
6PCS L298N Motor Driver Board Module DC Stepper Motor Controller Dual H-Bridge for Smart Car Robot Power
Asin: B08ZKQX2N8 | Ean: 0701715460294 | UPC: 701715460294
Voltage: 5V-35V, Drive Current: 2A (Max Single Bridge). This Module Uses A Large Capacity Filter Capacitance, A Continuation Protection Diode, Can Improve Reliability..
Application: It Is Used For Diy Projects, Smart Car Robot Power And So On. Package Included:6* L298n Motor Driver Controller Board Module.
Note: Through This Module Can Use The Built-In 78 M05 Drive Power Supply Parts Of Their Work, But In Order To Avoid The Voltage Regulator Chip Damage, When Using The Driving Voltage Is Greater Than 12V, Please Use The External Power Supply 5V Logic..
Easy To Use, No Assembly Required, Just Wire Up Motors And Power. Double H Bridge Driver Working Mode Make It More High Efficient..
Features
- This module USES L298N as the main drive chip, with strong driving ability, low calorific value and strong anti-interference ability.
- Easy to use, No assembly required, Just wire up motors and power. Double H bridge driver working mode make it more high efficient.
- Voltage: 5V-35V, drive current: 2A (Max single bridge). This module USES a large capacity filter capacitance, a continuation protection diode, can improve reliability.
- Note: Through this module can use the built-in 78 m05 drive power supply parts of their work, but in order to avoid the voltage regulator chip damage, when using the driving voltage is greater than 12V, please use the external power supply 5V logic.
- Application: It is used for DIY projects, smart car robot Power and so on. Package Included:6* L298N Motor Driver controller Board Module
- See more on Amazon...
Brand: Atnsinc | Manufacturer: Atnsinc
Weight: 0.33 Pounds
See On Amazon #13
Honbay L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control & Drives Module for Arduino Smart Car Power UNO MEGA R3 Mega2560 Duemilanove Nano Robo
Asin: B01CC8XI60 | Model: L298N-1P | PartNumber: L298N-1P | Ean: 6957316621754
Dual-Channel H-Bridge Driver Working Mode Creates Higher Working Efficiency.
This Module Can Use Built-In 78M05 For Electric Work Via A Driving Power Supply Part. But To Avoid The Damage Of The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage.
Using Large Capacity Filter Capacitor, This Module Can Follow Current To Protect Diodes, And Improve The Reliability.
L298n As Main Driver Chip Makes Strong Driving Ability/Small Heating/Strong.
Features
- L298N has such characteristics as strong driving ability, low calorific value and strong anti-interference ability
- L298N as main driver chip makes strong driving ability/small heating/strong
- Dual-channel H-bridge driver working mode creates higher working efficiency
- Using large capacity filter capacitor, this module can follow current to protect diodes, and improve the reliability
- This module can use built-in 78M05 for electric work via a driving power supply part. But to avoid the damage of the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
- See more on Amazon...
Brand: Honbay | Manufacturer: Honbay
Weight: 0.00 Pounds
See On Amazon #14
WMYCONGCONG 5 PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper Module
Asin: B06X9D1PR9 | Model: WGCD | PartNumber: WGCD | Ean: 0602914545525 | UPC: 602914545525
Size: 43 * 43 * 27 Mm/1.69 * 1.49 * 1.06In.
Package: 5 Pcs L298n Motor Controller Board Module..
With Built-In 78M05 To Supply Power, To Avoid The Damage Of Voltage Regulator Chip, When The Driving Voltage Is Greater Than 12V, Please Use The External 5V Logic Power Supply..
Dual H Bridge Dc Stepper Module, More Stable And Higher Work Efficiency..
Features
- L298N main driving chip, high drive ability, small heating value, strong anti-interference capability.
- Dual H bridge DC stepper module, more stable and higher work efficiency.
- Size: 43 * 43 * 27 mm/1.69 * 1.49 * 1.06in
- With built-in 78M05 to supply power, to avoid the damage of voltage regulator chip, when the driving voltage is greater than 12V, please use the external 5V logic power supply.
- Package: 5 pcs L298N motor controller board module.
- See more on Amazon...
Brand: WMYCONGCONG | Manufacturer: WGCD 1
Weight: 0.07 Pounds
See On Amazon #15
FainWan L298P DC Motor Drive Module L298P DC Motor Drive Shield H-Bridge Drive Expansion Board High-Power DC Stepper Motor Controller Compatible with Ar-duino
Asin: B09LM6FV2H | Model: L298P-Blue | PartNumber: L298P-Blue | Ean: 0768571599223 | UPC: 768571599223
Adopt Dedicated High-Power Motor Driver Chip L298p Which Can Directly Drive Two Dc Motors With Drive Current Up To 2A..
Adopt Dedicated High-Power Motor Driver Chip L298p Which Can Directly Drive Two Dc Motors With Drive Current Up To 2A..
Stack Design Can Be Directly Plugged Into The Ar-Duino, Easier To Use..
The L298p Shield Dc Motor Driver Has Pwm Speed Control Mode; Dual High-Power H-Bridge Driver..
Features
- Driven part of the input voltage VS: VIN Input 6.5 ~ 12V, PWRIN 4.8 ~ 35V input.
- The L298P shield DC motor driver has PWM speed control mode; dual high-power H-bridge driver.
- Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A.
- Stack design can be directly plugged into the Ar-duino, easier to use.
- Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A.
- See more on Amazon...
Brand: FainWan | Manufacturer: FainWan
See On Amazon #16
Aideepen 5pcs L298N Motor Driver Controller Board Module Stepper Motor DC Dual H Bridge for Arduin0 Smart Car Power UN0 MEGA R3 Mega256O
Asin: B07L892P54 | Model: 70100755 | PartNumber: 70100755
Dual-Channel H-Bridge Driver Working Mode Will Make Your Work More Efficient.
Built-In 78M05, Get Power From Drive Power.
High Working Power To 46V, Large Current Can Reach 3A Max And Continue Current Is 2A, Power To 25W.
Large Capacity Filter Capacitance, Afterflow Protection Diode, More Stable And Reliable.
Features
- ST L298N main driver chip makes strong driving ability, low heating, strong anti-interference and low calorific value
- Large capacity filter capacitance, afterflow protection diode, more stable and reliable
- Dual-channel H-bridge driver working mode will make your work more efficient
- High working power to 46v, large current can reach 3A max and continue current is 2A, power to 25w
- Built-in 78M05, get power from drive power
- See more on Amazon...
Brand: Aideepen | Manufacturer: Aideepen
See On Amazon #17
ShillehTek L298N Motor Driver Controller Board Module for Stepper Motor & DC Dual H-Bridge | Compatible with Raspberry Pi, Arduino, Smart Car Projects, Power UNO, MEGA R3, Mega2560
Asin: B0CW243ND1
[Wide Compatibility]: Seamlessly Integrates With Raspberry Pi, Arduino Uno, Mega, R3, Mega2560, And Other Microcontroller Platforms, Ensuring Your Projects Are Not Just Versatile But Also Innovative..
[User-Friendly]: Designed With Hobbyists And Professionals In Mind, The L298n Module Features Easy-To-Connect Terminals And Signal Inputs, Making Setup Quick And Straightforward, Even For Beginners..
[High-Voltage Operation]: Capable Of Operating At Voltages Up To 46V, This Motor Driver Can Handle A Substantial Current Load Of Up To 2A Per Channel, Providing The Power You Need For More Demanding Applications..
[Dual H-Bridge Design]: With Its Dual H-Bridge Configuration, This Module Allows For Independent Control Of Two Motors Simultaneously, Offering Both Direction And Speed Control For A More Dynamic And Flexible Operation..
Features
- [VERSATILE MOTOR CONTROL]: The ShillehTek L298N Motor Driver Controller Board is engineered for precision control of both stepper and DC motors, making it a perfect fit for a wide range of projects including smart cars, robotics, and automation systems.
- [DUAL H-BRIDGE DESIGN]: With its dual H-bridge configuration, this module allows for independent control of two motors simultaneously, offering both direction and speed control for a more dynamic and flexible operation.
- [WIDE COMPATIBILITY]: Seamlessly integrates with Raspberry Pi, Arduino UNO, MEGA, R3, Mega2560, and other microcontroller platforms, ensuring your projects are not just versatile but also innovative.
- [HIGH-VOLTAGE OPERATION]: Capable of operating at voltages up to 46V, this motor driver can handle a substantial current load of up to 2A per channel, providing the power you need for more demanding applications.
- [USER-FRIENDLY]: Designed with hobbyists and professionals in mind, the L298N module features easy-to-connect terminals and signal inputs, making setup quick and straightforward, even for beginners.
- See more on Amazon...
Brand: ST SHILLEHTEK | Manufacturer: Robotlink
Weight: 0.01 Pounds
See On Amazon #18
MELIFE 5Pack L298N Stepper Motor Driver Controller Board Dual H Bridge Module for Smart Car Power MEGA R3 Mega2560.
Asin: B07X3T313M | Model: 15489 | PartNumber: 15489 | Ean: 0701715430594 | UPC: 701715430594
No Assembly Required. This L298n Board Comes Ready To Go. Just Wire Up Motors And Power, Easy To Use.
Great For Diy Smart Car Robot Power Mega R3 Mega2560 Duemilanove. If Driving Voltage Is More Than 12V, Please Use External Standard 5Volt Ttl Outputs To Switch The H-Bridge Circuits.
External Size 43*43*27Mm / 1.69*1.69*1.06 Inch, Voltage 5V-35V, Drive Current 2A (Max Single Bridge).
Double H Bridge Design, Can Drive One 2-Phase Stepper Motor, One 4-Phase Stepper Motor Or Two Dc Motors, High Efficient.
Features
- Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable.
- Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient
- No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use
- External size 43*43*27mm / 1.69*1.69*1.06 inch, voltage 5V-35V, drive current 2A (Max single bridge)
- Great for DIY Smart Car Robot Power MEGA R3 Mega2560 Duemilanove. If driving voltage is more than 12V, please use external standard 5volt TTL outputs to switch the H-bridge circuits
- See more on Amazon...
Brand: MELIFE | Manufacturer: MELIFE
Weight: 0.07 Pounds
See On Amazon #19
2Pack L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper Compatible with Ar-duino Electric Projects, Smart Car Robot
Asin: B07PFC4RRB | Model: NA | PartNumber: NA | Ean: 0682228946126 | UPC: 682228946126
Use Large-Capacity Filter Capacitors And Diode With Freewheeling Protection Function, Increasing Reliability..
Large Capacity Filter Capacitance,Afterflow Protection Diode, More Stable And Reliable..
High Working Power To 46V,Large Current Can Reach 3A Max And Continue Current Is 2A, Power To 25W..
To Avoid Damage The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage..
Features
- Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
- To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
- Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability.
- High working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w.
- Large capacity filter capacitance,afterflow protection diode, more stable and reliable.
- See more on Amazon...
Brand: Generic | Manufacturer: Does Not Apply
See On Amazon
Looking For Something Else?
Search