DIYables L298N Motor Driver Module for Arduino, ESP32, ESP8266, Raspberry Pi, 2 Pieces
Asin: B0BPG7PYY5 | Model: DIY-L298N | PartNumber: DIY-L298N
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Drive Voltage: 5Vdc - 35Vdc, Drive Current: 2A.
L298n Module Works With Arduino, Esp32, Esp8266, Raspberry Pi, Or Any 5V Or 3.3V Microcontroller..
Tutorials For L298n With Arduino And Esp32 Are Provided.
L298n Module Can Controls One Stepper Motor, Two Dc Motors, Or Two Linear Actuators.
Features
- L298N Dual-channel H-bridge driver: 2 pieces
- L298N module can controls one stepper motor, two DC motors, or two linear actuators
- Drive voltage: 5VDC - 35VDC, Drive current: 2A
- Tutorials for L298N with Arduino and ESP32 are provided
- L298N Module works with Arduino, ESP32, ESP8266, Raspberry Pi, or any 5V or 3.3V microcontroller.
- See more on Amazon...
Brand: DIYables | Manufacturer: DIYables
See On Amazon Similar To DIYables L298N Motor Driver Module
#1
KOOBOOK 5Pcs 2.5A Dual Channel DC Motor Driver Mini Module Beyond L298N PWM Speed Control
Asin: B07S39BC5Q | Model: KB018 | PartNumber: KB018 | Ean: 0682559865592 | UPC: 682559865592
Dual 2.5A X 2, Is More Power Than 1.5A Motor-Driven Version. With Built-In Thermal Protection Circuit, Do Not Worry About The Motor Stall Burned, The Temperature Automatically After The Recovery. (Currently On The Market Of Intelligent Car Voltage And Current Are In This Range).
Small Size, Light Weight, 0 Standby Current..
Two-Way H-Bridge Motor Drive, Can Drive Two Dc Motors Or One 4-Wire Two-Phase Stepper Motor At The Same Time..
L298n Internal Transistor Switch, Low Efficiency, High Fever, Need To Heat, Bulky, The Market Is Very Easy To Burn The L298n, Are Not Using The Original Chip, This Product Can Be Replaced..
Features
- Original professional motor drive chip, builting-in low-conduction internal resistance MOS switch, heat is minimal, no heat sink, energy saving, is your ideal choice when you use battery as power supply.
- L298N internal transistor switch, low efficiency, high fever, need to heat, bulky, the market is very easy to burn the L298N, are not using the original chip, this product can be replaced.
- Dual 2.5A x 2, is more power than 1.5A motor-driven version. With built-in thermal protection circuit, do not worry about the motor stall burned, the temperature automatically after the recovery. (Currently on the market of intelligent car voltage and current are in this range)
- Two-way H-bridge motor drive, can drive two DC motors or one 4-wire two-phase stepper motor at the same time.
- Small size, light weight, 0 standby current.
- See more on Amazon...
Brand: KOOBOOK | Manufacturer: KOOBOOK
See On Amazon #2
BOJACK L298N Motor DC Dual H-Bridge Motor Driver Controller Board Module Stepper for Arduino Intelligent Car Power UNO MEGA R3 Mega2560 with 4pcs
Asin: B0C5JCF5RS | Model: BJ-L298N | PartNumber: BJ-L298N | Ean: 0762917148410 | UPC: 762917148410
Brand: BOJACK | Manufacturer: BOJACK
Dimensions: 1.00 x 9.00 x 4.00 inches | Weight: 0.07 Pounds
See On Amazon #3
HiLetgo 4pcs L298N Motor Driver Controller Board Module Stepper Motor DC Dual H-Bridge for Arduino Smart Car Power UNO MEGA R3 Mega2560
Asin: B07BK1QL5T | Model: 3-01-0032-4PCS | PartNumber: 3-01-0032-4PCS
Dual-Channel H-Bridge Driver Working Mode Creates Higher Working Efficiency.
Large Capacity Filter Capacitance, Afterflow Protection Diode, More Stable And Reliable.
To Avoid Damage The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage.
Use Large-Capacity Filter Capacitors And Diode With Freewheeling Protection Function, Increasing Reliability.
Features
- L298N as main driver chip makes strong driving ability/small heating/strong anti-interference/low calorific value
- Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
- Dual-channel H-bridge driver working mode creates higher working efficiency
- To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
- Large capacity filter capacitance, afterflow protection diode, more stable and reliable
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo®
Dimensions: 1.18 x 2.36 x 2.17 inches
See On Amazon #4
DROK DC Motor Driver, L298 Dual H Bridge Motor Speed Controller DC 6.5V-27V 7A PWM Motor Regulator Board 12V 24V Electric Motor Control Module Industrial 160W with Optocoupler Isolation
Asin: B06XGD5SCB | Model: 200206_OZ | PartNumber: 200206_OZ | Ean: 0701822755689 | UPC: 701822755689
Forward And Revsersely Rotate: The In1, In2/In3, In4 Port Can Control Forward Or Reverse Motor Rotation..
Under Voltage Protection: The Motor Driver Module Is With Under Voltage Protection To Prevent Instantaneous Large Current From Damaging The Module..
Pwm Speed Control: Enable Signal Terminal (Ena) Input Pwm Can Regulate Speed, Pwm Frequency Range 0-10Khz..
Strong Drive: The Motor Controller Board Adopts Dual H Bridge, Can Drive Two Dc Motors At The Same Time..
Features
- DROK DC motor driver input voltage range is DC 6.5V-27V, can be input DC 12V or 24V, rated output current of each port is 7A, total output power is 160W.
- STRONG DRIVE: the motor controller board adopts dual H bridge, can drive two DC motors at the same time.
- FORWARD and REVSERSELY ROTATE: the IN1, IN2/IN3, IN4 port can control forward or reverse motor rotation.
- PWM SPEED CONTROL: enable signal terminal (ENA) input PWM can regulate speed, PWM frequency range 0-10KHZ.
- UNDER VOLTAGE PROTECTION: the motor driver module is with under voltage protection to prevent instantaneous large current from damaging the module.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
See On Amazon #5
4 PACK L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control and Drives Module for Arduino Smart Car Power Compatible with Arduino UNO MEGA R3 Mega2560
Asin: B07WS89781 | Ean: 0701715429888 | UPC: 701715429888
Using Large Capacity Filter Capacitor,This Module Can Follow Current To Protect Diodes,And Improve The Reliability..
To Avoid Damage The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage.
Dual-Channel H-Bridge Driver Working Mode Creates Higher Working Efficiency.
This Module Can Use Built-In 78M05 For Electric Work Via A Driving Power Supply Part.But To Avoid The Damage Of The Voltage Stabilizing Chip,Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage..
Features
- Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability,low calorific value and strong anti-interference ability.
- This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage of the voltage stabilizing chip,please use an external 5V logic supply when using more than 12V driving voltage.
- Using large capacity filter capacitor,this module can follow current to protect diodes,and improve the reliability.
- Dual-channel H-bridge driver working mode creates higher working efficiency
- To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon #6
VKLSVAN 2 PCS L298N Motor DC Stepper Motor Driver Controller Board Module Dual H Bridge for Arduino
Asin: B0CLYBPGP9
【High Reliability】Use Large-Capacity Filter Capacitors And Diode With Freewheeling Protection Function, Increasing Reliability..
【Warm Tips】To Avoid Damage The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage..
【Main Parameters】Drive Voltage: 5V-35V, Drive Current: 2A (Max Single Bridge),Maximum Power: 25W, Logic Current 0Ma-36Ma,Operating Mode: H-Bridge Driver (Dual)..
【High Efficiency】Dual-Channel H-Bridge Driver Working Mode Creates Higher Working Efficiency..
Features
- High Quality Chip L298N as main driver chip, strong driving ability/small heating/strong anti-interference/low calorific value,can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
- High Efficiency Dual-channel H-bridge driver working mode creates higher working efficiency.
- High Reliability Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability.
- Main Parameters Drive voltage: 5V-35V, Drive current: 2A (MAX single bridge),Maximum power: 25W, Logic current 0mA-36mA,Operating mode: H-bridge driver (dual).
- Warm Tips To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
- See more on Amazon...
Brand: VKLSVAN | Manufacturer: VKLSVAN
See On Amazon #7
KeeYees L298N Motor Drive Controller Board Stepper Motor Control Module Dual H-Bridge with DC Motor and Smart Car Wheel Compatible with Arduino
Asin: B07ZT619TD | Ean: 0744678331003 | UPC: 744678331003
Tt Motor: The Motor Is A Two-Axis Motor With A Reduction Ratio Of 1:48, Which Has Strong Anti-Interference Ability..
To Avoid Damage The Voltage Stabilizing Chip Of Motor Drive Module, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage..
Smart Car Wheels: The Wheels Are Made Of High-Strength Plastic And The Tires Are Made Of Durable Black Rubber..
Motor Drive Controller: L298n Used As The Main Driver Chip. It Has The Strong Driving Ability, Low Calorific Value And Strong Anti-Interference Ability..
Features
- This is a good parts kit for RC car project. It not only comes with 4pcs wheels and motors, but also 2pcs motor drive modules and 60pcs jumper wires, which are very useful accessories for your project.
- Motor Drive Controller: L298N used as the main driver chip. It has the strong driving ability, low calorific value and strong anti-interference ability.
- TT Motor: The motor is a two-axis motor with a reduction ratio of 1:48, which has strong anti-interference ability.
- Smart Car Wheels: The wheels are made of high-strength plastic and the tires are made of durable black rubber.
- To avoid damage the voltage stabilizing chip of Motor Drive Module, please use an external 5V logic supply when using more than 12V driving voltage.
- See more on Amazon...
Brand: KeeYees | Manufacturer: KeeYees
See On Amazon #8
WWZMDiB L298N Stepper Motor DC Dual H-Bridge Driver Controller Board Module for Arduino Raspberry Pi (2Pcs L298N)
Asin: B0CR6BX5QL | Model: L298N | PartNumber: L298N | Ean: 0705252405800 | UPC: 705252405800
⚡【Logic Voltage】：5V(Current 0Ma-36Ma).
⚡【Maximum Power】: 25W.
⚡【Drive Voltage】: 5V-35V(Current: 2A (Max Single Bridge).
🎯【Operating Mode】: H-Bridge Driver (Dual).
Features
- L298N Motor Driver Controller Board Module :L298N as main chip. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
- Operating mode : H-bridge driver (dual)
- Logic voltage 5V(current 0mA-36mA)
- Drive voltage : 5V-35V(current: 2A (MAX single bridge)
- Maximum power : 25W
- See more on Amazon...
Brand: WWZMDiB | Manufacturer: WWZMDiB
See On Amazon #9
HiLetgo 5pcs L9110S DC Motor Drive Module Stepper Motor Drive Controller Board 2.5-12V H-Bridge Can Drive Dual DC Motor at The Same time or 4 Wire 2 Phase Stepper Motor
Asin: B00M0F243E | Model: 3-01-0499 | PartNumber: 3-01-0499 | Ean: 0702082656921 | UPC: 702082656921
Module Supply Voltage :2.5-12V.
Dual Motor Driver Chip L9110s.
Features
- HiLetgo L9110S H-bridge DC Stepper Motor Driver Controller Board
- Dual motor driver chip L9110S
- Module supply voltage :2.5-12V
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #10
Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino
Asin: B014KMHSW6 | Model: CECOMINOD012186 | PartNumber: CECOMINOD012186 | Ean: 0735090644130, 6930864920920, 0783325944715 | UPC: 783325944715, 735090644130
Use Large-Capacity Filter Capacitors And Diode With Freewheeling Protection Function, Increasing Reliability.
Large Capacity Filter Capacitance,Afterflow Protection Diode, More Stable And Reliable..
High Working Power To 35V,Large Current Can Reach 3A Max And Continue Current Is 2A, Power To 25W..
To Avoid Damage The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage.
Features
- Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
- To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
- Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
- High working power to 35v,large current can reach 3A MAX and continue current is 2A, power to 25w.
- Large capacity filter capacitance,afterflow protection diode, more stable and reliable.
- See more on Amazon...
Brand: Qunqi | Manufacturer: Qunqi
Dimensions: 0.75 x 1.14 x 0.98 inches | Weight: 0.07 Pounds
See On Amazon #11
EC Buying DC Motor Driver L298 7A 160W Dual H Bridge Motor Speed Controller DC 6.5V-27V PWM Motor Regulator Board 12V 24V Electric Motor Control Module Industrial with Optocoupler Isolation
Asin: B0C73DC9CZ | Model: L298 | PartNumber: L298
The Signal Optocoupler Isolates The Input And Can Be Directly Controlled By The Io Port Without Interference.
The High-Power Tvs And Electrostatic Discharge Circuit Suppress Transient Interference Pulses And Static Electricity, Enhance Emc Performance.
Under Voltage Protection To Prevent Instantaneous High Current From Burning The Module.
Wide Voltage Input Dc 6.5V~27V.
Features
- Double H-bridge, capable of driving two DC motors simultaneously, single circuit 7A current, high power
- Wide voltage input DC 6.5V~27V
- The signal optocoupler isolates the input and can be directly controlled by the IO port without interference
- Under voltage protection to prevent instantaneous high current from burning the module
- The high-power TVS and electrostatic discharge circuit suppress transient interference pulses and static electricity, enhance EMC performance
- See more on Amazon...
Brand: EC Buying | Manufacturer: EC Buying
See On Amazon #12
Qunqi 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino
Asin: B01M29YK5U | Model: MK-050-2 | PartNumber: MK-050-2 | Ean: 6941595310874
Use Large-Capacity Filter Capacitors And Diode With Freewheeling Protection Function, Increasing Reliability.
Large Capacity Filter Capacitance,Afterflow Protection Diode, More Stable And Reliable..
High Working Power To 35V,Large Current Can Reach 3A Max And Continue Current Is 2A, Power To 25W..
To Avoid Damage The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage.
Features
- Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
- To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
- Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
- High working power to 35v,large current can reach 3A MAX and continue current is 2A, power to 25w.
- Large capacity filter capacitance,afterflow protection diode, more stable and reliable.
- See more on Amazon...
Brand: Qunqi | Manufacturer: Qunqi
Dimensions: 1.06 x 1.69 x 1.69 inches | Weight: 0.11 Pounds
See On Amazon #13
WWZMDiB 4Pcs Mini L298N 2 Channel H Bridge DC Motor Driver Board with MX1508 Chip for Electric Projects, Smart Car Robot.
Asin: B0BD53Q7TT | Model: MG037-2 | PartNumber: MG037-2 | Ean: 0618202520594 | UPC: 618202520594
⚡【Input Voltage】: 1.8~7V.
🥇Use Of Imported Original Chip, Built-In Low On-Resistance Mos Switch, Minimal Heat, No Heat Sink, Small Size, Low Power Consumption, Is Ideal For Battery Powered..
⚡【Output Current】: Single Operating Current 1.5A, Peak Current Up To 2.5A, Low Standby Current (Less Than 10Ua)..
⚡【Supply Voltage】: 2~10V..
Features
- Mini L298N 2 Channel H Bridge DC Motor Driver Board : Can drive two DC motors or a 4-wire 2-phase stepper motors ,can achieve forward rotation or reverse rotation, it is possible to adjust the rotation speed.for Electric Projects, Smart Car Robot.
- Supply voltage : 2~10V.
- Input Voltage : 1.8~7V
- Output Current : Single Operating current 1.5A, peak current up to 2.5A, low standby current (less than 10uA).
- Use of imported original chip, built-in low on-resistance MOS switch, minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered.
- See more on Amazon...
Brand: WWZMDiB | Manufacturer: WWZMDiB
See On Amazon #14
DAOKAI 2 Pcs L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control Module for Arduino Smart Car Power with Dupont Cable, 24AWG Wire
Asin: B09TJZ953V | Model: DE-DA-004 | PartNumber: DE-DA-004
🥇【Note】It Can Be Used To Take Power Through The Built-In 78M05 Drive Power Part Of The Work, But In Order To Avoid Damage To The Regulator Chip, When A Drive Voltage Greater Than 12V, Please Use An External 5V Logic Supply..
🥇【Package Content】The Package Comes With 2 X L298n Motor Drive Controller Board, 1 X Male-Female Dupont Cables 15 Pin, 1 X Male-Male Dupont Cables 15 Pin, 1 X 24 Awg Wire.
🥇【Application】Suiable For Arduino Diy Smart Car Or Other Control Motor Project..
🥇【Feature】The Module Uses L298n Chip As The Main Drive, With Driving Ability, Low Heat, Anti-Jamming Features; Uses High-Capacity Filter Capacitors, Freewheeling Diode Protection, Reliability Can Be Improved..
Features
- Parameter Operating mode: H-bridge driver (dual); Drive voltage: 5V-35V; Drive current: 2A (MAX single bridge)
- Feature The module uses L298N chip as the main drive, with driving ability, low heat, anti-jamming features; Uses high-capacity filter capacitors, freewheeling diode protection, reliability can be improved.
- Note It can be used to take power through the built-in 78M05 drive power part of the work, but in order to avoid damage to the regulator chip, when a drive voltage greater than 12V, please use an external 5V logic supply.
- Application Suiable for Arduino DIY smart car or other control motor project.
- Package Content The package comes with 2 x L298N Motor Drive Controller Board, 1 x Male-Female Dupont Cables 15 PIN, 1 x Male-Male Dupont Cables 15 PIN, 1 x 24 AWG Wire
- See more on Amazon...
Brand: DAOKAI | Manufacturer: DAOKAI
See On Amazon #15
DAOKI 2 PCS L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control and Drives Module for Arduino Smart Car Power UNO MEGA R3 Mega2560 with Dupont Cable
Asin: B085XSLKFQ | Model: DR-US-254 | PartNumber: DR-US-254 | Ean: 6431773211128
Driving Dc Motor Because The Module Is Drived By Double H Bridge,It Can Drive Two Motors Simultaneously..
Package Content: 2 X L298n Motor Drive Controller Board, 1 X 11.8" Male-Female Dupont Cables 12 Pin, 1 X 19.6" 28Awg Wire.
Input The Following Driving Timing From In1-In4 Then The Speed And Direction Of The Stepper Motor Can Be Controlled.
The Connecting Method Is Shown Inbelow Figure After Enable Ena Enb.
Features
- The signal is shown in the figure
- The connecting method is shown inbelow figure after enable ENA ENB
- Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.
- Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled
- Package Content: 2 x L298N Motor Drive Controller Board, 1 x 11.8 male-FeMale Dupont Cables 12 PIN, 1 x 19.6 28AWG Wire
- See more on Amazon...
Brand: DAOKI | Manufacturer: DAOKI
Weight: 0.00 pounds
See On Amazon #16
DIYables 2WD RC Robot Car Kit for Arduino, ESP32, ESP8266, Raspberry Pi, Including L298N Motor Driver and Sensors
Asin: B0CF5693G9 | Model: DIY-SMART-CAR-KIT | PartNumber: DIY-SMART-CAR-KIT
Including L298n Motor Driver.
Tutorials For Arduino, Esp32, Esp8266.
Including Ultrasonic Sensor And Ir Obstacle Avoidance Sensor.
Including 2Wd Rc Car Chassis And Dc Motors.
Features
- Robot Car Kit for Arduino, Raspberry Pi, ESP32, ESP8266
- Including 2WD RC Car Chassis and DC motors
- Including L298N motor driver
- Including Ultrasonic Sensor and IR Obstacle Avoidance Sensor
- Tutorials for Arduino, ESP32, ESP8266
- See more on Amazon...
Brand: DIYables | Manufacturer: DIYables
See On Amazon #17
WMYCONGCONG 5 PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper Module
Asin: B06X9D1PR9 | Model: WGCD | PartNumber: WGCD | Ean: 0602914545525 | UPC: 602914545525
Size: 43 * 43 * 27 Mm/1.69 * 1.49 * 1.06In.
Package: 5 Pcs L298n Motor Controller Board Module..
With Built-In 78M05 To Supply Power, To Avoid The Damage Of Voltage Regulator Chip, When The Driving Voltage Is Greater Than 12V, Please Use The External 5V Logic Power Supply..
Dual H Bridge Dc Stepper Module, More Stable And Higher Work Efficiency..
Features
- L298N main driving chip, high drive ability, small heating value, strong anti-interference capability.
- Dual H bridge DC stepper module, more stable and higher work efficiency.
- Size: 43 * 43 * 27 mm/1.69 * 1.49 * 1.06in
- With built-in 78M05 to supply power, to avoid the damage of voltage regulator chip, when the driving voltage is greater than 12V, please use the external 5V logic power supply.
- Package: 5 pcs L298N motor controller board module.
- See more on Amazon...
Brand: WMYCONGCONG | Manufacturer: WGCD 1
Weight: 0.07 Pounds
See On Amazon #18
12pcs L298N Motor Drive Controller Board Module Stepper Motor DC Dual H Bridge for Arduino Smart Car Power UNO MEGA R3 Mega2560 with Jumper Wires
Asin: B0BNBC5LLZ | Ean: 0701715468290 | UPC: 701715468290
High Efficient: Dual-Channel H-Bridge Driver Design, Can Directly Drive Two 3-30V Dc Motor, Or One 2-Phase Stepper Motor, One 4-Phase Stepper Motor, Working Power Up To 35V, High Current Can Reach 3A Max, Continuous Current Is 2A, Power Up To 25W, Which Created Higher Efficiency..
Package Content: You Will Get 12Pcs L298n Motor Drive Controller Board With Dupont Wire..
Using Large Capacity Filter Capacitor,This Module Can Follow Current To Protect Diodes,And Improve The Reliability..
This Module Can Use Built-In 78M05 For Electric Work Via A Driving Power Supply Part.But To Avoid The Damage Of The Voltage Stabilizing Chip,Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage..
Features
- L298N Motor Driver: L298N as the main driver chip, the module has such characteristics as strong driving ability,low calorific value and strong anti-interference ability.
- This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage of the voltage stabilizing chip,please use an external 5V logic supply when using more than 12V driving voltage.
- High efficient: dual-channel H-bridge driver design, can directly drive two 3-30V DC motor, or one 2-phase stepper motor, one 4-phase stepper motor, working power up to 35v, high current can reach 3A MAX, continuous current is 2A, power up to 25w, which created higher efficiency.
- Using large capacity filter capacitor,this module can follow current to protect diodes,and improve the reliability.
- Package content: you will get 12pcs L298N motor drive controller board with dupont wire.
- See more on Amazon...
Brand: AOICRIE | Manufacturer: AOICRIE
See On Amazon #19
Kyuionty DC Motor Driver L298 DC 6.5V-27V 7A Dual H Bridge Motor Speed Controller PWM Motor Regulator Board 12V 24V Motor Control Module Industrial with Optocoupler Isolation, 160W
Asin: B08FC1851N | Model: JL0136-1 | PartNumber: JL0136-1 | Ean: 0779584514899 | UPC: 779584514899
Forward & Reverse Rotation: In1, In2/In3, In4 Ports Can Control The Forward Or Reverse Rotation Of The Motor..
Undervoltage Protection: The Motor Driver Module Has Undervoltage Protection To Prevent The Instantaneous Large Current From Damaging The Module..
Pwm Speed Control: Enable The Signal Terminal (Ena) Input Pwm To Adjust The Speed, Pwm Frequency Range 0-10Khz..
Strong Drive: The Motor Control Board Adopts Double H Bridge, Which Can Drive Two Dc Motors At The Same Time..
Features
- The input voltage range of the DC motor driver is DC 6.5V-27V, DC 12V or 24V can be input, the rated output current of each port is 7A, and the total output power is 160W.
- Strong Drive: The motor control board adopts double H bridge, which can drive two DC motors at the same time.
- Forward & Reverse Rotation: IN1, IN2/IN3, IN4 ports can control the forward or reverse rotation of the motor.
- PWM Speed Control: enable the signal terminal (ENA) input PWM to adjust the speed, PWM frequency range 0-10KHZ.
- Undervoltage Protection: The motor driver module has undervoltage protection to prevent the instantaneous large current from damaging the module.
- See more on Amazon...
Brand: Kyuionty | Manufacturer: Kyuionty
See On Amazon #20
L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper for Arduino Smart Car Robot R3 2560 ESP32 ESP826
Asin: B00NJOTBOK | Model: FZ0407 | PartNumber: FZ0407 | Ean: 0797698769981, 0701702805619 | UPC: 701702805619, 797698769981
Can Drive One 2-Phase Stepper Motor, One 4-Phase Stepper Motor Or Two Dc Motors.
Large Capacity Filter Capacitance,Afterflow Protection Diode, More Stable And Reliable.
Built-In 78M05,Get Power From Drive Power,However, When Drive Power Over12v, Please Use The External 5V Power As Power Supply.
High Working Power To 46V,Large Current Can Reach 3A Max And Continue Current Is 2A, Power To 25W.
Features
- L298N as main chip,low heat,outstanding anti-interference performance
- High working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w
- Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors
- Built-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power supply
- Large capacity filter capacitance,afterflow protection diode, more stable and reliable
- See more on Amazon...
Brand: DIYmall | Manufacturer: DIYmall
Dimensions: 0.80 x 1.60 x 1.60 inches | Weight: 0.02 Pounds
See On Amazon
Looking For Something Else?
Search