KETOTEK Humidity Controller Outlet Plug with Sensor, Digital Humidistat Switch 120V with Alarm for Greenhouse Mushroom Humidifier Dehumidifier
Asin: B0CD7HPY6N | Model: KT3400-US | PartNumber: KT3400-US
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Humidity/Temperature Calibration】Hold Down The "Up/Clk", "Mode" Button To Perform Real-Time Calibration Of Humidity And Temperature. Humidity Correction Range: -10~10%Rh. Temperature Correction Range: -9.9~9.9°C. Press And Hold The "Mode" Button To Save And Exit The Calibration After It Is Completed..
【Fault Indication Function】When The Sensor Is Not Connected Or The Measured Data Is Out Of The Range Of The Thermostat Outlet Or There Is A Short Circuit, The Screen Will Display Fault Indication So That You Can Make Adjustments In Time..
【Safe, Lightweight, Universal】The Humidity Controller Is Made Of Abs Material, Which Is Safer And More Convenient To Use. It Can Be Used In Refrigerators, Incubators, Pet Reptiles, Poultry Houses, Glass Containers, Aquaculture, Greenhouses, Household And Other Areas With Temperature And Humidity Requirements..
【Humidity/Temperature Control】Humidity Control Range: 20~99% Rh. Temperature Control Range: -10°C~50°C/14°F~122°F; This Humidistat Switch Is Easy To Program. Set Start And Stop Humidity/Temperature To Make The Connected Devices Work According To The Program. You Can Also Set The Alarm Function. When The Humidity/Temperature Exceeds The Set Value, The Humidistat Outlet Will Sound An Alarm..
Features
- Multifunction This humidity controller plug socket with sensor has 4 operation modes (humidification mode, dehumidification mode; heating mode, cooling mode); temperature and humidity alarm function; temperature and humidity calibration; reset function; data memory function, can save all setting parameters after power failure; temperature unit / ; key tone settings, etc.
- Humidity/Temperature Control Humidity control range: 20~99% RH. Temperature control range: -10 C~50 C/14 F~122 F; This humidistat switch is easy to program. Set start and stop humidity/temperature to make the connected devices work according to the program. You can also set the alarm function. When the humidity/temperature exceeds the set value, the humidistat outlet will sound an alarm.
- Humidity/Temperature Calibration Hold down the UP/CLK, MODE button to perform real-time calibration of humidity and temperature. Humidity correction range: -10~10%RH. Temperature correction range: -9.9~9.9 C. Press and hold the MODE button to save and exit the calibration after it is completed.
- Safe, Lightweight, Universal The humidity controller is made of ABS material, which is safer and more convenient to use. It can be used in refrigerators, incubators, pet reptiles, poultry houses, glass containers, aquaculture, greenhouses, household and other areas with temperature and humidity requirements.
- Fault Indication Function When the sensor is not connected or the measured data is out of the range of the thermostat outlet or there is a short circuit, the screen will display fault indication so that you can make adjustments in time.
- See more on Amazon...
Brand: KETOTEK | Manufacturer: KETOTEK
See On Amazon Similar To KETOTEK Humidity Controller Outlet Plug
#1
Inkbird Humidity Controller IHC200 Humidistat Mushroom Greenhouse Pre Wired Outlet Dual Stage Humidifier Dehumidifier.
Asin: B01J1E5LWM | Model: IHC-200 | PartNumber: IHC-200 | Ean: 0747380963135, 0705701511847 | UPC: 747380963135, 705701511847
💎💎Switch The Modes Between Humidification And Dehumidification Automatically;Calibrate The Humidity Value;.
💎💎Alarm When Humidity Exceeds High/Low Humidity Setting Value;.
💎💎Alarm When Sensor Error Or Humidity Exceeds Limit;.
💎💎Control Humidity By Setting Value And Differential Value; Delay Protection For Control Output; Query Current Temperature;.
Features
- Humidity measuring range: 5~99.99%RH; Humidity control range: 5~99%RH; Accuracy: 3%RH
- Control humidity by setting value and differential value; Delay protection for Control output; Query current temperature;
- Switch the modes between humidification and dehumidification automatically;Calibrate the humidity value;
- Alarm when sensor error or humidity exceeds limit;
- Alarm when humidity exceeds high/low humidity setting value;
- See more on Amazon...
Brand: Inkbird | Manufacturer: LERWAY TECH
Dimensions: 2.60 x 6.70 x 6.70 Inches
See On Amazon #2
BN-LINK Digital Cooling Thermostat Controller for Cooling Device Circulation Box Fans 40-108F 8.3A 1000W
Asin: B01LZV591B | Model: BNQ-T7B(C) | PartNumber: BNQ-T7B(C) | Ean: 0726179400372 | UPC: 726179400372
Rugged Construction: The Cord For The Temperature Probe And Grounded 3-Prong Plug Measure An Extended 6-Feet In Length, Designed To Suit Almost Any Application You Can Imagine..
Safe & Reliable: Our Thermostat Controller Is Etl Listed, And Rigorously Tested For Quality Control And Safety. Conforms To Ul Std No. 60730-1, 60730-2-9. Temperature Control Range Is 40-108°F, Temperature Display Range Is 32 -140°F. Rated Voltage Is 120Vac 60Hz, Max Loading: 8.3A 1000W. Do Not Immerse This Cooling Thermostat Controller Body Into Water..
Variety Of Uses: Our Thermostat Controller Can Be Used For Refrigeration, Fermentation, Greenhouse Fan And More, Keeping Your Various Environments In Their Ideal Temperature Range.Please Note: This Cooling Temperature Controller Only Used For Cooling Device..
Ease Of Mind: Handy Led Cooling And Power Indicator Lights Allow You To See The Controller’S Status Even In Total Darkness. Controller Features A Convenient Hanging Tab, And A Bright, Easy-To-Read Display Inside A Tough Plastic Housing..
Features
- EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.
- EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
- RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
- VARIETY OF USES: Our thermostat controller can be used for refrigeration, fermentation, greenhouse fan and more, keeping your various environments in their ideal temperature range.Please note: This cooling temperature controller only used for cooling device.
- SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108 F, temperature display range is 32 -140 F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse this cooling thermostat controller body into water.
- See more on Amazon...
Brand: BN-LINK | Manufacturer: BN-LINK
Dimensions: 1.60 x 4.50 x 3.50 Inches | Weight: 0.00 pounds
See On Amazon #3
KETOTEK Digital Thermostat Outlet Plug Temperature Controller Outlet Socket 120V Heating Cooling Control 110V 15A Celsius Fahrenheit Display White
Asin: B0957NYW37 | Model: KTF0159US | PartNumber: KTF0159US
【Timing Function】 F01 Cycle Timer Mode; F02 Countdown On Mode, F03 Countdown Off Mode, F04 Countdown On And Countdown Off Mode. You Can Choose F01 Mode To Control The Device To Work In Cycles, Or Choose F02~F04 Modes To Countdown To Turn On Or Turn Off The Device. Set Range: 0~99 Hours 59 Minutes. Please Note That Temperature Control Function And Timing Function Cannot Be Used At The Same Time..
【Wide Range Of Application】 This Temperature Controlled Outlet Plug Is Widely Used For Greenhouse, Reptile, Incubator, Terrarium, Freezer, Refrigerator, Heater, Fridge, Homebrew, Vivarium, Fermentation, Heat Mat, And Other Temperature-Controlled System. It Can Also Be Used As A Timer For Cycle Timing And Countdown..
【3M Ntc Probe & More Function】 3M Ntc 10K Temprature Sensor Probe (Not Recommended To Be Kept In Water For More Than 1 Month). Large Lcd Display. Temperature Calibration. Reset Function. Data Storage Function That All Parameters Set Can Be Saved When Power Is Off..
【Easy To Program】 Just Set Start Temperature And Stop Temperature, This Plug In Thermostat Will Work In Heating Or Cooling Mode. Temperature Control Range:-40~248℉ (-40℃~120℃), Temperature Control Accuracy: ±1%. Celsius And Fahrenheit Can Be Converted. This Digital Temeprature Controller Also Supports Temperature Calibration If Needed..
Features
- Relay output, easy to use Plug-and-play design, just plug the device into this thermostat plug outlet and set parameters, it will work as programmed. Power supply: 120V 15% AC; Output:Max 15A/120V.
- Easy to program Just set start temperature and stop temperature, this plug in thermostat will work in heating or cooling mode. Temperature control range:-40~248 (-40 ~120 ), temperature control accuracy: 1%. Celsius and Fahrenheit can be converted. This digital temeprature controller also supports temperature calibration if needed.
- Timing function F01 Cycle Timer mode; F02 Countdown ON mode, F03 Countdown OFF mode, F04 Countdown ON and Countdown OFF mode. You can choose F01 mode to control the device to work in cycles, or choose F02~F04 modes to countdown to turn on or turn off the device. Set range: 0~99 hours 59 minutes. Please note that temperature control function and timing function cannot be used at the same time.
- 3m NTC probe & more function 3m NTC 10K temprature sensor probe (Not recommended to be kept in water for more than 1 month). Large LCD display. Temperature calibration. Reset function. Data storage function that all parameters set can be saved when power is off.
- Wide Range of Application This temperature controlled outlet plug is widely used for greenhouse, reptile, incubator, terrarium, freezer, refrigerator, heater, fridge, homebrew, vivarium, fermentation, heat mat, and other temperature-controlled system. It can also be used as a timer for cycle timing and countdown.
- See more on Amazon...
Brand: KETOTEK | Manufacturer: KETOTEK
Dimensions: 4.70 x 2.00 x 2.30 Inches
See On Amazon #4
Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired Dual Stage Thermostat 120VAC 15A 1800W ETL Listed Mushroom Greenhouse Homebrew
Asin: B07GQWY9HM | Model: 246 | PartNumber: 246 | Ean: 0761895321754 | UPC: 761895321754
💙💙Supporting Calibration, Compressor Delay And Saving Reset Setting Values. Centigrade Or Fahrenheit Degree Display, Easy To Set, Pv And Sv Dual Display Windows. And With Compressor Delay For Protecting Cooling Device. Itc-608T Can Save The Original Setting Values In Case Accidentally Power-Off..
💙💙Multifunctional Usage. Temperature And Humidity Controller Itc-608T Can Be Used In Home Brewing (Refrigerator), Fermenting, Greenhouse, Terrarium, Reptile, Planting (Mushroom), Meat Storage And Cooking..
💙💙More Power Up To 1800W. Temperature Control Range Is -40-212°F(-40-100℃), Humidity Display Range Is 5 -99.0%Rh. Max Loading: 120V 15A 1800W. Temperature Senor Is Waterproof While Humidity Sensor Is Not..
💙💙Three In One Multifunctional Temperature And Humidity Control Mode With Dual Relay Output. Itc-608T Can Work As A Temperature Controller, A Humidity Controller, A Temperature And Humidity Controller. First, Only Plug Temperature Sensor With Cooling And Heating Equipment. Second, Only Plug Humidity Sensor With Humidifier And Dehumidifier Equipment. Third, Plug Both Temperature And Humidity Sensor With Cooling/Heating And Humidifier/Dehumidifier Equipment..
Features
- US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
- Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
- Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
- More power up to 1800W. Temperature control range is -40-212 F(-40-100 ), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
- Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
- See more on Amazon...
Brand: Inkbird | Manufacturer: Inkbird
Dimensions: 3.34 x 1.37 x 8.10 inches | Weight: 1.34 pounds
See On Amazon #5
Inkbird Digital Pre-Wired Outlet Dual Stage Humidity Controller IHC-200 for Mushroom Ventilator Fan Crawl Space Curing Meat Grow Room Tent Humidifier Dehumidifier.
Asin: B01FQKXRXA | Model: IHC-200 | PartNumber: IHC-200 | Ean: 8931042126583
[Two Modes] Dual Outlet, You Can Switch Different Modes Between Humidification And Dehumidification Automatically..
[Multiple Protection] Alarm When Humidity Exceeds High/Low Humidity Setting Value; Alarm When Sensor Error Or Humidity Exceeds Limit.Delay Protection For Output..
[Application] Widely Used With Mushroom, Mini Greenhouse, Ventilator Fan, Crawl Space, Turtle Enclosure, Curing Chamber, Seed Germination, Etc..
[Humidity Control Range] 5~99.99%Rh; Control Accuracy: ±3%Rh. Refresh Rate: 0.5S. Power Supply: 10A 110V 1100W..
Features
- [Simple and convenient designed]Plug and play, dual LED screens enabling more humanized 3 buttons for easy use. And you can install it on the wall.
- [Humidity Control Range] 5~99.99%RH; Control accuracy: 3%RH. Refresh rate: 0.5s. Power supply: 10A 110V 1100W.
- [Two modes] Dual outlet, you can switch different modes between humidification and dehumidification automatically.
- [Application] Widely used with mushroom, mini greenhouse, ventilator fan, crawl space, turtle enclosure, curing chamber, seed germination, etc.
- [Multiple protection] Alarm when humidity exceeds high/low humidity setting value; Alarm when sensor error or humidity exceeds limit.Delay protection for output.
- See more on Amazon...
Brand: Inkbird | Manufacturer: Inkbird tech
Dimensions: 6.70 x 2.60 x 2.60 inches
See On Amazon #6
Humidity Controller IHC200 Inkbird Humidistat Mushroom Greenhouse Pre Wired Outlet Dual Stage Humidifier Dehumidifier(new version)
Asin: B07XGQ7Q53 | Model: IHC-200-US-2 | PartNumber: IHC-200-US-2
💎Switch The Modes Between Humidification And Dehumidification Automatically;Calibrate The Humidity Value;.
💎Alarm When Humidity Exceeds High/Low Humidity Setting Value;.
💎Alarm When Sensor Error Or Humidity Exceeds Limit;.
💎Control Humidity By Setting Value And Differential Value; Delay Protection For Control Output; Query Current Temperature;.
Features
- Humidity measuring range: 5~99.99%RH; Humidity control range: 5~99%RH; Accuracy: 3%RH
- Control humidity by setting value and differential value; Delay protection for Control output; Query current temperature;
- Switch the modes between humidification and dehumidification automatically;Calibrate the humidity value;
- Alarm when sensor error or humidity exceeds limit;
- Alarm when humidity exceeds high/low humidity setting value;
- See more on Amazon...
Brand: Inkbird | Manufacturer: lerway tech
Dimensions: 2.60 x 1.20 x 6.70 Inches | Weight: 0.99 pounds
See On Amazon #7
SENSTREE Temperature and Humidity Controller Outlet Plug-in Thermostat Humidistat Reptile Humidity Controller Greenhouse Thermostat Dual Stage Pre-Wired Electronic Temperature and Humidity Controller
Asin: B095WF48W1 | Model: DHTC-1011-1ZJ | PartNumber: DHTC-1011-1ZJ
🍀【For Safety】Our Temperature And Humidity Controller With Temperature Calibration And Compressor Delay Which Can Protect Your Cooling Equipment. This Temperature And Humidity Controller`S High And Low Value Alarms Are Available Which Has Benifit For Safety..
🍀【Application】Our Pre-Wired Electronic Heating Thermostat Temperature Controller Widely Used For Curing Chamber, Home Brewing (Refrigerator), Fermentation, Greenhouse, Seed Germination, Terrarium, Reptile, Planting (Mushroom), Meat Storage And Cooking, Ventilator Fan, Crawl Space, Turtle Enclosure, Snake Cage, Tobacco Cage, Etc..
🍀【Calibration】Supporting Calibration, Compressor Delay And Saving Reset Setting Values. Centigrade Or Fahrenheit Degree Display, Easy To Set.Spend No Time Worrying About Whats Happening In The Grow Room With This Temperature And Humidity Controller..
🍀【Easy To Use】 Our Thermostat Temperature And Humidity Controller Is Simple And Convenient Designed. Plug And Play, Dual Led Screens Enabling More Humanized 3 Buttons For Easy Use..
Features
- Dual Relay Output Thermostat and Humidity Controller Be able to control temperature and humidity at the same time.This product has design with the dual stage outlet with Temperature and Humidity Sensor which can sasified you.This temperature and humidity controller be able to display measured temperature and set temperature at the same time.
- Easy to Use Our thermostat temperature and humidity controller is simple and convenient designed. Plug and play, dual LED screens enabling more humanized 3 buttons for easy use.
- For Safety Our temperature and humidity controller with temperature calibration and compressor delay which can protect your cooling equipment. This temperature and humidity controller`s high and low value alarms are available which has benifit for safety.
- Calibration Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set.Spend no time worrying about whats happening in the grow room with this temperature and humidity controller.
- Application Our Pre-Wired Electronic Heating Thermostat Temperature Controller widely used for curing chamber, home brewing (refrigerator), fermentation, greenhouse, seed germination, terrarium, reptile, planting (mushroom), meat storage and cooking, ventilator fan, crawl space, turtle enclosure, snake cage, tobacco cage, etc.
- See more on Amazon...
Brand: SENSTREE | Manufacturer: SENSTREE
See On Amazon #8
Pymeter Humidistat Temperature Humidity Controller Reptile Mushroom Greenhouse Thermostat Dual Controlled Outlets Heater Fridge Humidifier Dehumidifier
Asin: B08SXWSPZJ | Model: PY-20TH | PartNumber: PY-20TH
✓【Easy To Use】Each Outlet Has Independent Temperature/Humidity Controlled Switch And It Intelligently Identify Heating/Cooling And Humidification/Dehumidification Mode Via On & Off Set-Point, It Is Very Easy And Flexible To Keep Target At Desired Temperature/Humidity Range..
✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature/Humidity Calibration..
✓【Safe And Reliable】Support High And Low Temperature/Humidity Alarm..
✓【All In One Sensor】Able To Read & Control Both Of Temperature And Humidity..
Features
- Dual Outlets Outlet 1 controls Heating or Cooling, outlet 2 controls Humidification or Dehumidification.
- All In One Sensor Able to read & control both of temperature and humidity.
- Easy to Use Each outlet has independent temperature/humidity controlled switch and it intelligently identify heating/cooling and humidification/dehumidification mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature/humidity range.
- Safe and Reliable Support High and Low Temperature/Humidity Alarm.
- Enhanced Functions Power-Off Memory; Power-On Delay; Temperature/Humidity Calibration.
- See more on Amazon...
Brand: Pymeter | Manufacturer: Pymeter
Dimensions: 1.57 x 8.26 x 2.16 inches | Weight: 1.00 Pounds
See On Amazon #9
Inkbird ITC-308 Temperature Controller with IHC-200 Humidity Controller
Asin: B01N56KEU6
【Dual Relay】Both Controllers Offer Two Power Outlets. Plug-In Heating Equipment, And Ventilation Fan On The Temp Controller, And Plug The Humidifier And Dehumidification Equipment On The Humidity Controller..
【Reliable】Inkbird Is The First One To Offer Pre-Wired Temp/Humidity Controllers..
【Affordable】Diy The Ventilation System For Your Grow Tent Gets More Fun But Costs Less Than Getting A Pre-Set Ventilation System..
【Buzzer Alarm】High And Low Temperature/Humidity Alarms Support Custom Adjust..
Features
- Plug n Play no more complicated wires are needed, and the programable temperature controllers is friendly to growers, staters.
- Buzzer Alarm High and low temperature/humidity alarms support custom adjust.
- Dual relay Both controllers offer two power outlets. Plug-in heating equipment, and ventilation fan on the temp controller, and plug the humidifier and dehumidification equipment on the humidity controller.
- Affordable DIY the ventilation system for your grow tent gets more fun but costs less than getting a pre-set ventilation system.
- Reliable Inkbird is the first one to offer pre-wired temp/humidity controllers.
- See more on Amazon...
Brand: Inkbird | Manufacturer: Inkbird Tech
See On Amazon #10
DEWENWILS Digital Temperature Controller Thermostat Outlet with Heating & Cooling Mode for Chest Freezer, Home Brewing, Green House, Incubation, Reptiles, -22 -221 F, 120V/10A/1200W
Asin: B0BS3GBVGB
【Buzzer Alarm】Just Set The Maximum And Minimum Desired Temperatures Of The Thermostat Controller, Ntc Probe Can Register Temperature Changes Quickly And Accurately, The Buzzer Alarm Will Be Activated When The Temperature Goes Out Of Setting Range Or The Sensor Experiences A Malfunction To Ensure Your Safety.
【Safety & Warranty】120Vac/10A/1200W Power Rating And Sjt 18Awg Power Cord Ensure Your Safety. Compressor Delay Function To Protect Your Refrigeration/Heating Equipment. Do Not Immerse The Reptile Thermostat Or Probe In Water. 1-Year Warranty And 24/7 Professional Customer Service Are Provided.
【Wide Application】Easy To Convert Freezer To Refrigerator, This Temperature Controlled Outlet Also Can Be Used With Most Electric Appliances, Such As Home Wine/Beer Brewing, Aquarium, Reptile Terrarium, Tank, Seedling Heat Mat, Bbq, Incubation, Space Heater, Ac Unit, Fridge, Grow Room, Greenhouse, Exhaust Fan, Etc..
【User-Friendly Design】Support °C/°F Display, Large Lcd Screen Is Easy To Read The Current Temperature Value Clearly, Power Indicator Allows To Check The Working Status Of The Temperature Controller Even In The Dark; Hanging Tab Is Designed For Hanging Anywhere You Want, Power-Off And Shutdown Memory Function Supported.
Features
- Easy to Mount & Operate Plug and play, heating and cooling modes are available, simple to program, -22 -221 F/-30 C-105 C temperature control range make it suitable for extreme conditions in summer or winter, keep the desired temperature constant and steady within the parameters you established
- User-friendly Design Support C/ F display, large LCD screen is easy to read the current temperature value clearly, power indicator allows to check the working status of the temperature controller even in the dark; hanging tab is designed for hanging anywhere you want, power-off and shutdown memory function supported
- Buzzer Alarm Just set the maximum and minimum desired temperatures of the thermostat controller, NTC probe can register temperature changes quickly and accurately, the buzzer alarm will be activated when the temperature goes out of setting range or the sensor experiences a malfunction to ensure your safety
- Wide Application Easy to convert freezer to refrigerator, this temperature controlled outlet also can be used with most electric appliances, such as Home wine/beer brewing, aquarium, reptile terrarium, tank, seedling heat mat, BBQ, incubation, space heater, AC unit, fridge, grow room, greenhouse, exhaust fan, etc.
- Safety & Warranty 120VAC/10A/1200W power rating and SJT 18AWG power cord ensure your safety. Compressor delay function to protect your refrigeration/heating equipment. Do not immerse the reptile thermostat or probe in water. 1-year warranty and 24/7 professional customer service are provided
- See more on Amazon...
Brand: DEWENWILS | Manufacturer: Dewenwils
See On Amazon #11
Inkbird Digital Wi-Fi Humidity Controller IHC-200 Dual Outlet Pre-Wired Humidistat for Mushroom Growing Curing Meat Reptile Greenhouse Support Humidifier Dehumidifier Fan iOS&Andriod.
Asin: B0892B3VWM | Model: IHC-200-WiFi | PartNumber: IHC-200-WiFi
Plug-N-Play: No Complicated Installation Required. Display The Set Humidity Value And The Measured Humidity Value At The Same Time With 2 Screens. Support Humidity Calibration And Dehumidification Control Delay Protection..
Please Feel Free To Contact Us At Anytime You Want To, We Will Reply In 24 Hours!.
High/Low Humidity Alarm: Set A High/Low Humidity Alarm, The Controller Will Alarm To Remind You If The Humidity Value Exceeds The Setting Value, And It Also Alarm When A Probe Error Occurs. Press Any Button To Turn Off The Alarm Sound Or You Can Turn It Off On Your Phone..
Dual Relay Output: Support Both Humidifying Equipment And Dehumidifying Equipment. Voltage: 100-230Vac 50/60Hz, 10A. Maximum Power: 1200W(120Vac), 2200W(220Vac). Humidity Measurement Range: 10 ~ 99% Rh. Relative Humidity Accuracy: ± 3% Rh ~ ± 5% Rh..
Features
- Remote Control: Connect the IHC-200 Wi-Fi humidity controller to 2.4GHz Wi-Fi, then you can monitor or adjust the humidity on your phone through the INKBIRD app at any time anywhere.
- Dual Relay Output: Support both humidifying equipment and dehumidifying equipment. Voltage: 100-230Vac 50/60Hz, 10A. Maximum Power: 1200W(120Vac), 2200W(220Vac). Humidity measurement range: 10 ~ 99% RH. Relative humidity accuracy: 3% RH ~ 5% RH.
- Plug-n-Play: No complicated installation required. Display the set humidity value and the measured humidity value at the same time with 2 screens. Support humidity calibration and dehumidification control delay protection.
- High/Low Humidity Alarm: Set a High/Low Humidity Alarm, the controller will alarm to remind you if the humidity value exceeds the setting value, and it also alarm when a probe error occurs. Press any button to turn off the alarm sound or you can turn it off on your phone.
- Please feel free to contact us at anytime you want to, we will reply in 24 hours!
- See more on Amazon...
Brand: Inkbird | Manufacturer: Inkbird
Dimensions: 2.60 x 1.20 x 6.70 inches | Weight: 0.99 Pounds
See On Amazon #12
DIGITEN DHTC-1011 Temperature and Humidity Controller Outlet Plug in Thermostat Humidistat Reptile Humidity Controller Greenhouse Thermostat Heating Cooling Humidifier Dehumidifier
Asin: B08K31FCFC | Model: DHTC-1011 | PartNumber: DHTC-1011
🍾【Dual Relay Output】Be Able To Control Temperature And Humidity Equipments At The Same Time, One Is For Temperature Controlling And Another Is For Humidity Controlling..
🦎【Multiple Use】Widely Used For Home Brewing (Refrigerator), Fermentation, Greenhouse, Terrarium, Reptile, Planting (Mushroom), Meat Storage And Cooking, Ventilator Fan, Crawl Space, Turtle Enclosure, Curing Chamber, Snake Cage, Tobacco Cage, Etc..
🧀【Multi-Functional Setting】Supporting Calibration, Compressor Delay And Saving Reset Setting Values. Centigrade Or Fahrenheit Degree Display, Easy To Set. High Or Low Temperature And Humdity Alarms Are Available. And With Temperature Calibration And Compressor Delay For Protecting Cooling Device. It Can Save The Original Setting Values In Case Accidentally Power-Off..
🌱【Convenient Design】The Temperature And Humidity Controller Has A Large Lcd Screen With Simple 3-Button, And Pre-Wired Design Making It Easier For Use With Plug And Play..
Features
- Wide Control Range Temperature and humidity 2 in 1 sensor; temperature control range is -40 248 , humidity control range is 1%RH 100%RH. It starts cooling or heating, humidifying or dehumidifying according to configured parameters, which helps to keep a desired temperature and humidity anytime.
- Convenient Design The temperature and humidity controller has a large LCD screen with simple 3-button, and pre-wired design making it easier for use with plug and play.
- Dual Relay Output Be able to control temperature and humidity equipments at the same time, one is for temperature controlling and another is for humidity controlling.
- Multi-functional Setting Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set. High or low temperature and humdity alarms are available. And with temperature calibration and compressor delay for protecting cooling device. It can save the original setting values in case accidentally power-off.
- Multiple Use Widely used for home brewing (refrigerator), fermentation, greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking, ventilator fan, crawl space, turtle enclosure, curing chamber, snake cage, tobacco cage, etc.
- See more on Amazon...
Brand: DIGITEN | Manufacturer: DIGITEN
See On Amazon #13
KETOTEK Digital Temperature Controller AC110V 10A Fahrenheit Thermostat with 2m Waterproof Sensor 2 Relays Heating Cooling Incubator
Asin: B073QQ2VP2 | Model: KT1000 | PartNumber: KT1000 | Ean: 0723260103761 | UPC: 723260103761
【High Accuracy】Made Of Abs Heavy-Duty And Anti-Flamming Plastic Shell With Embedded Structure, This Digital Dual Relay Thermostat Is Safe And Energy Saving. Accuracy: ±1°F, Temperature Control Range: -58~212°F, Power Consumption: ≤3W, Power Supply: 110Vac 50Hz/60Hz. Output: 2 Relays, Cooling (10A/110-220Vac) / Heating (10A/110-220Vac)..
【Multi-Functional】This Incubator Thermostat Ac110v Supports Temperature Calibration, Compressor Delay Protection, Alarm When Temperature Exceeds Temperature Limit Or When Sensor Error, All Parameters Setting Can Be Saved After Restart. There Is No Voltage Output Directly, You Need To Connect Additional Power Supply For The Load..
【Connect Heater & Cooler At The Same Time】No More Frequently Change Wiring Between Heater And Cooler. This Temperature Regulator Has 2 Relays. Compared With Other 1 Relay Temperature Controllers, You Can Wire 2 Appliances (Heater And Cooler) At The Same Time. (Please Kindly Note No Outlets, Wiring Needed)..
【Keep Temperaure In Desired Range】It's On/Off Control Mode. You Can Program By Simply Setting Temperature Set Value And Difference Value, Heating And Cooling Mode Can Be Automatically Switched. Fully Utilize The Stc Microcontroller And Ntc Probe To Have This Temperature Regulator Has Great Accuracy..
Features
- 2m Waterproof probe Digital temperature controller 110V can be used in moisture and water environment, you can use it in home brewing, fridge, pet breeding, reptile, tank, incubation, fermentation, seedling heat mat, accelerating germination, ect.
- Keep temperaure in desired range It's on/off control mode. You can program by simply setting temperature set value and difference value, heating and cooling mode can be automatically switched. Fully utilize the stc microcontroller and NTC probe to have this temperature regulator has great accuracy.
- High accuracy Made of ABS heavy-duty and anti-flamming plastic shell with embedded structure, this digital dual relay thermostat is safe and energy saving. Accuracy: 1 F, Temperature control range: -58~212 F, Power consumption: 3W, Power Supply: 110VAC 50Hz/60Hz. Output: 2 Relays, Cooling (10A/110-220VAC) / Heating (10A/110-220VAC).
- Connect heater & cooler at the same time No more frequently change wiring between heater and cooler. This temperature regulator has 2 relays. Compared with other 1 relay temperature controllers, you can wire 2 appliances (heater and cooler) at the same time. (Please kindly note no outlets, wiring needed).
- Multi-functional This incubator thermostat ac110V supports temperature calibration, compressor delay protection, alarm when temperature exceeds temperature limit or when sensor error, all parameters setting can be saved after restart. There is no voltage output directly, you need to connect additional power supply for the load.
- See more on Amazon...
Brand: KETOTEK | Manufacturer: KETOTEK
Dimensions: 3.35 x 2.95 x 1.34 inches | Weight: 0.13 pounds
See On Amazon #14
Inkbird ITC-608T Temperature and Humidity Controller 1800W ETL Listed AC Dual Stage Outlet Thermostat with Temperature and Humidity Sensor Mushroom Greenhouse Reptile
Asin: B07HF9W41Y | Model: ITC608T TempHumi | PartNumber: ITC608T TempHumi
💜💜Three In One Multifunctional Temperature And Humidity Control Mode With Dual Relay Output. Itc-608T Can Work As A Temperature Controller, A Humidity Controller, A Temperature And Humidity Controller. First, Only Plug Temperature Sensor With Cooling And Heating Equipment. Second, Only Plug Humidity Sensor With Humidifier And Dehumidifier Equipment. Third, Plug Both Temperature And Humidity Sensor With Cooling/Heating And Humidifier/Dehumidifier Equipment..
💜💜Multifunctional Usage. Temperature And Humidity Controller Itc-608T Can Be Used In Home Brewing (Refrigerator), Fermenting, Greenhouse, Terrarium, Reptile, Planting (Mushroom), Meat Storage And Cooking..
💜💜Supporting Calibration, Compressor Delay And Saving Reset Setting Values. Centigrade Or Fahrenheit Degree Display, Easy To Set, Pv And Sv Dual Display Windows. And With Compressor Delay For Protecting Cooling Device. Itc-608T Can Save The Original Setting Values In Case Accidentally Power-Off..
💜💜More Power Up To 1800W. Temperature Control Range Is -40-212°F(-40-100℃), Humidity Display Range Is 5 -99.0%Rh. Max Loading: 120V 15A 1800W. Temperature Senor Is Waterproof While Humidity Sensor Is Not..
Features
- US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety, a programmable logic controller.
- More power up to 1800W. Temperature control range is -40-212 F(-40-100 ), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
- Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
- Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
- Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
- See more on Amazon...
Brand: Inkbird | Manufacturer: Inkbird Tech
Weight: 1.72 pounds
See On Amazon #15
DIGITEN Digital Humidity Controller Humidistat Pre-Wired Plug Simple-Stage AC 110V -240V with High Accuracy Humidity Sensor for Dehumidifier Humidifier Reptiles Greenhouse Exhaust Fan Fermentation
Asin: B07CSVN892 | Model: DTC102Z | PartNumber: DTC102Z | Ean: 0604753637034 | UPC: 604753637034
❤️💚❤️Reliable And Highly Accurate Humidify Sensor. This Humidistat Is Plug And Play Transducers Designed For Oem Applications Where Reliable And Accurate Measurements Are Needed..
🍄💚🍄High And Low Humidity Alarms Are Available, Over-Humidity And Sensor Error Alarm. Widely Used For Koji Fermentation, Grow Tent, Exhaust Fan, Humidifier Control, Refrigerator, Dehumidify Control, Meat Curing Room, Bathroom, Mushroom, Mini Greenhouse, Crawl Space, Ventilator Fan, Etc. 12 Month Warranty!.
🏡🍀🏡With A Humidity Correction Function. Our Humidity Controller Allow User To Adjust Measuring Accuracy Base To On Different Probe, Etc..
✨❤️✨Our Humidistat Is Aasy To Use And Program, Dehumidify Mode & Humidify Mode. Only 2-Steps Setting For Your Application, Switch Different Modes Between Humidification And Dehumidification Automatically, Plug-N-Play Design..
Features
- Humidistat With Large LCD screen. Display the sensed humidity, setting humidity, and custom icons on the display indicate working mode.
- Our humidistat is aasy to use and program, Dehumidify Mode & Humidify Mode. Only 2-steps setting for your application, switch different modes between humidification and dehumidification automatically, plug-n-play design.
- Reliable and highly accurate humidify sensor. This humidistat is plug and play transducers designed for OEM applications where reliable and accurate measurements are needed.
- With a humidity correction function. Our humidity controller allow user to adjust measuring accuracy base to on different probe, etc.
- High and low humidity alarms are available, over-humidity and sensor error alarm. Widely used for koji fermentation, grow tent, exhaust fan, humidifier control, refrigerator, dehumidify control, meat curing room, bathroom, mushroom, mini greenhouse, crawl space, ventilator fan, etc. 12 month warranty!
- See more on Amazon...
Brand: DIGITEN | Manufacturer: DIGITEN
Weight: 0.00 pounds
See On Amazon #16
KETOTEK Digital Thermostat Plug Socket Temperature Controller Outlet 3m Probe 120V 15A 1800W C F Heating Cooling Control for Incubator Brewing Incubator Greenhouse Terrarium Heat Mat
Asin: B094QC2R72 | Model: KT3100 US | PartNumber: KT3100 US
【Timing Function】 Thermostat Timer Socket Has F01-F04 Mode, F01 Cycle Time Control, F02 Countdown On Mode, F03 Countdown Off Mode And F04 Countdown On, Countdown Off Mode, Time Range Is 0-99 Hours And 59 Minutes..
【Multiple Appliance】 The Thermostat Plug Socket Is Pre-Wired, Just Plug In And Play, Suitable For Various Applications. Widely Used In Household, Heating Cooling Equipment, Incubator, Greenhouse, Carbon Crystal Heating, Aquaculture,Etc..
【Various Functions】 Heating/Refrigeration Function; ℉/°C Switchable Function; F01-F04 Timing Function; -9.9~9.9℉/℃ Temperature Calibration Function; Memory Function; Reset Function.
【3 M Temperature Sensor】 The Thermostat Socket Is Supplied With A 3M Ntc10k/B3950 Temperature Sensor, Can Sense -72~176℉/-40~120°C Temperature.
Features
- Temperature Control Function Set the temperature controller outlet start and stop temperature to control the heating or cooling equipment, Timer thermostat support 15A/120V 1800W load, suitable for most home appliance.
- 3 m Temperature Sensor The thermostat socket is supplied with a 3m NTC10K/B3950 temperature sensor, can sense -72~176 /-40~120 C Temperature
- Timing Function Thermostat Timer socket has F01-F04 mode, F01 cycle time control, F02 countdown on mode, F03 countdown off mode and F04 countdown on, countdown off mode, Time range is 0-99 hours and 59 minutes.
- Various Functions Heating/Refrigeration Function; / C Switchable Function; F01-F04 Timing Function; -9.9~9.9 / Temperature Calibration Function; Memory Function; Reset Function
- Multiple Appliance The thermostat plug socket is Pre-wired, just plug in and play, suitable for various applications. Widely used in household, heating cooling equipment, Incubator, greenhouse, carbon crystal heating, aquaculture,etc.
- See more on Amazon...
Brand: KETOTEK | Manufacturer: KETOTEK
Dimensions: 4.72 x 2.28 x 1.54 Inches | Weight: 0.45 pounds
See On Amazon #17
Humidity Controller, Briidea Pre-Wired Humidistat Humidifier Dehumidifier with LCD Display High Accuracy Humidity Sensor, Ideal for Greenhouse Mushroom Grow Tent
Asin: B0C594TF9H | Model: MK-041 | PartNumber: MK-041
Easy To Operation: Large Lcd Screen With Simple But Grand Appearance Design Looks Very Clean And Bright, More Intuitively Displaying All Necessary Parameters. Simple 3-Button For Easy Operation.
Convenient Design: Highly Innovative Piggyback Plug Erasing Your Worry Of The Messy Cords, Allowing Users To Simply Plug The Dehumidification Or Humidification Equipment Into The Socket That Is On The Back Of The Power Plug. Easy To Use, Plug-N-Play.
Protection Feature: To Prevent Cycling And Being Overloaded In A Short Time Which Will Damage Or Harm To The Device And Its Components, It Is Standard Configured With Automatic Minimum Run-Time Setting, Delay Protection For Control Output. And Also With Data Memory Function When Suddenly Power Off.
Highly Accurate Detection: The Use Of High-End And Superior Chip Make Sure The Service Life Of The Sensor Is Guaranteed. Accuracy Can Be ±3%Rh, To Precisely Provides A Comfortable Humidity Environment You Need. Support Humidity Calibration Function.
Features
- MULTIFUNCTION: The humidity controller has a series of practical functions, including dehumidification and humidification mode, manual and automatic mode, high or low humidity alarms etc. Turn on/off your equipment automatically to reach the ideal humidity level. Humanized intelligent operation design is realized
- HIGHLY ACCURATE DETECTION: The use of high-end and superior chip make sure the service life of the sensor is guaranteed. Accuracy can be 3%RH, to precisely provides a comfortable humidity environment you need. Support humidity calibration function
- EASY TO OPERATION: Large LCD screen with simple but grand appearance design looks very clean and bright, more intuitively displaying all necessary parameters. Simple 3-button for easy operation
- PROTECTION FEATURE: To prevent cycling and being overloaded in a short time which will damage or harm to the device and its components, it is standard configured with automatic minimum run-time setting, delay protection for control output. And also with data memory function when suddenly power off
- CONVENIENT DESIGN: Highly innovative piggyback plug erasing your worry of the messy cords, allowing users to simply plug the dehumidification or humidification equipment into the socket that is on the back of the power plug. Easy to use, plug-n-play
- See more on Amazon...
Brand: briidea | Manufacturer: briidea
Dimensions: 1.00 x 1.00 x 1.00 Inches
See On Amazon #18
Xetron Temperature and Humidity Controller 110V 10A Digital Humidistat Thermostat Controller Pre-Wired Outlet for Fan Seed Fermentation Reptiles Heater, STC-1000ProTH NotWIFI
Asin: B09R217FPW | Model: STC-1000Pro TH | PartNumber: STC-1000Pro TH
【Dual Alarm】 The Buzzer Beeps And Bell Icon Display If The Temperature Or Humidity Goes Out Of Settable Alarm Limits. Ideal For Fan Freezer Refrigerator Homebrewing Reptiles Pets House Fermentation Incubation Greenhouse Terrarium Etc..
【Security & Quality】 Made Of Anti-Flame Abs Material, Comply With Ce, Fcc Standard And It Has Compressor Delay Protection, Making It More Secure To Use. If You Have Any Questions Please Contact Us, Our Product Has A One-Year Warranty And Lifetime Customer Service..
【Easy To Operate】 No Other Accessories Required And Use It Directly. 2 Pre-Wired Temperature And Humidity Outlets And Simple 3-Button Design Makes The Temperature Humidity Controller Plug And Play, With The 2.5" Large Lcd Screen Display..
【Perfect Fit For Your Diy Project】 Save Power And Your Money! Personalized Parameters Can Be Set, Support Settings Including ℃/℉, Temperature & Humidity Calibration, High And Low Alarms Value, Start-Up Delay, Protection Time And Etc., To Meet The Different Needs Of Users..
Features
- Ideal Temperature & Humidity Control Temperature (Work1 for Heating or Cooling) and Humidity (Work2 for Humidify or Dehumidify) modes can be used simultaneously or independently all the time. Wide temperature control range: 23 ~158 /-5~70 with accuracy 1 / 0.5 . Humidity range 5%RH~99%RH and accuracy 5%RH. NOTE: Not WIFI version No APP
- Perfect fit for your DIY project Save power and your money! Personalized parameters can be set, support settings including / , temperature & humidity calibration, high and low alarms value, start-up delay, protection time and etc., to meet the different needs of users.
- Dual Alarm The Buzzer Beeps and bell icon display if the temperature or humidity goes out of settable alarm limits. Ideal for fan freezer refrigerator homebrewing reptiles pets house fermentation incubation greenhouse terrarium etc.
- Easy to Operate No other accessories required and use it directly. 2 Pre-wired temperature and humidity outlets and simple 3-button design makes the temperature humidity controller plug and play, with the 2.5 large LCD screen display.
- Security & Quality Made of anti-flame ABS material, comply with CE, FCC standard and it has compressor delay protection, making it more secure to use. If you have any questions please contact us, our product has a one-year warranty and lifetime customer service.
- See more on Amazon...
Brand: Xetron | Manufacturer: Xetron
Dimensions: 2.36 x 7.87 x 5.91 Inches | Weight: 0.88 pounds
See On Amazon #19
KETOTEK Temperature Humidity Controller Digital Thermostat Module 120V, Heating Cooling Humidification and dehumidification Control 110V 10A, Fahrenheit Display
Asin: B08ZNDL9NQ | Model: KT-100b | PartNumber: KT-100b
【High Precision】This Humidity Switch Is Equipped With High-Precision Temperature And Humidity Sensor Probe, Delivering Accurate And Stable Performance. Control Accuracy: ±1°F/±3%Rh. Temperature And Humidity Calibration Functions..
【Security Alarm】Alarm When Temperature Or Humidity Exceeds High / Low Temperature Humidity Setting Value, Alarm When Sensor Error Or Temperature / Humidity Exceeds Limit. The Screen Display "-H-" Means Exceeding The High Temperature Or Humidity Value, And The Screen Display "-L-" Means Exceeding The Low Temperature Or Humidity Value..
【Specification】Power Supply: 120Vac, Output: Max 10A 120Vac(10A Relay Inside, Please Use Load Current <5A), Power Output Directly, Temperature Control Range: -58~176°F, Humidity Control Range: 10-99%Rh. Package: 1*Temperature And Humidity Controller With Sensor, 1* English Manual..
【Dual Output】This Humidity Regulator Can Control Temperature And Humidity At The Same Time, And Can Be Connected With Cooling / Heating Device And Humidifier / Dehumidifier At The Same Time. Warning: Please Kindly Note No Outlets, Wirring Needed. The Output1 And Output2 Have Power Output When It Works. The Voltage Is Output Directly. The Load Must Be Connected Before Power On..
Features
- Safe, lightweight and versatile Made in ABS material for safer use. This temperature humidity controller is small and lightweight. It can be used for refrigerator, freezer, incubator, reptile, terrarium, mushroom, greenhouse, grow tent, biltong making, machine room and other fields with requirements on temperature and humidity.
- Dual output This humidity regulator can control temperature and humidity at the same time, and can be connected with cooling / heating device and humidifier / dehumidifier at the same time. Warning: Please kindly note no outlets, wirring needed. The output1 and output2 have power output when it works. The voltage is output directly. The load must be connected before power on.
- High precision This humidity switch is equipped with high-precision temperature and humidity sensor probe, delivering accurate and stable performance. Control accuracy: 1 F/ 3%RH. Temperature and humidity calibration functions.
- Specification Power supply: 120Vac, Output: Max 10A 120Vac(10A Relay inside, please use Load current <5A), power output directly, Temperature control range: -58~176 F, Humidity control range: 10-99%RH. Package: 1*Temperature and humidity controller with sensor, 1* English manual.
- Security alarm Alarm when temperature or humidity exceeds high / low temperature humidity setting value, alarm when sensor error or temperature / humidity exceeds limit. The screen display -H- means exceeding the high temperature or humidity value, and the screen display -L- means exceeding the low temperature or humidity value.
- See more on Amazon...
Brand: KETOTEK | Manufacturer: KETOTEK
Dimensions: 2.17 x 2.95 x 1.26 Inches | Weight: 0.44 pounds
See On Amazon #20
Humidistat Outlet Plug, Humidifier/Dehumidifier 120V 13A
Asin: B09TNC96PF | Model: HUM1 | PartNumber: HUM1
Programmable Range 30%- 95% Rh.
Tested For Accuracy..
Simple Intuitive Design..
Measurable Range 5%- 95% Rh.
Features
- Use to control Humidifiers and Dehumidifiers
- Measurable range 5%- 95% RH
- Programmable range 30%- 95% RH
- Simple intuitive design.
- Tested for accuracy.
- See more on Amazon...
Brand: Thermaplug | Manufacturer: Medina Trading LLC
See On Amazon
Looking For Something Else?
Search