CGRSDZKD Relay 5pcs Industrial Electronic Circuit Board DIY Jrc-23f-hfd23-005 012024-1zs 6-pin Sensitive Hongfa Communication Relay 1A Electronic Relay (Size : HFD23-024-1ZS)
Asin: B0CYPCCQ4S | Model: CGRSDZKD | PartNumber: CGRSDZKD | Ean: 9131936565743
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Widely Used For All Mcu Control, Industrial Sector, Plc Control, Smart Home Control..
Easy To Install, Waterproof Design, Effective Heat Dissipation, With No Excess Heat Issue..
Small Size/Low Power Consumption/High Voltage/ High Sensitivity..
Anti-Interference Ability, Stable Performance..
Features
- Relays
- anti-interference ability, stable performance.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Small size/Low power consumption/High voltage/ High sensitivity.
- Easy to install, Waterproof design, Effective heat dissipation, with no excess heat issue.
- See more on Amazon...
Brand: CGRSDZKD | Manufacturer: CGRSDZKD
Weight: 0.11 pounds
See On Amazon Similar To CGRSDZKD Relay 5pcs Industrial Electronic
#1
AC100V-250V 30A High Power 2-Channel Relay High Current DC5V High-Low Level Trigger Switch Module for Arduino
Asin: B077W1NVLM | Model: Walfrontbg8atmgd7x | PartNumber: Walfrontbg8atmgd7x | Ean: 0663862470437 | UPC: 663862470437
Easy To Use, Designed With Screw Terminals For Convenient Connection.
Four Mounting Holes Are Great For Installation.
High Or Low Level Trigger Can Be Selected By Jumper.
Large Load Capacity, The Relay Can Connect To Maximum 30A, 250V Loads.
Features
- This is a high-low level trigger 2-channel relay module that can control two loads
- Large load capacity, the relay can connect to maximum 30A, 250V loads
- Easy to use, designed with screw terminals for convenient connection
- High or low level trigger can be selected by jumper
- Four mounting holes are great for installation
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.22 Pounds
See On Amazon #2
HiLetgo 2pcs 5V One Channel Relay Module Relay Switch with OPTO Isolation High Low Level Trigger
Asin: B00LW15A4W | Model: 3-01-0340 | PartNumber: 3-01-0340 | Ean: 0702082655948 | UPC: 702082655948
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Move..
The Module Can Be Set By Jumper High Or Low Trigger..
The Interface Design Of Human Nature, All Interfaces Are Available Through A Direct Connection Terminal Leads, Very Convenient..
Using Smd Optocoupler Isolation, Strong Driving Capability, Stable Performance; Trigger Current 5Ma..
Features
- The module uses genuine quality relay, normally open interfaces , Maximum load: AC 250V/10A, DC 30V/10A.
- Using SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.
- Fault-tolerant design, even if the control line is broken, the relay will not move.
- The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient.
- The Module can be set by jumper high or low trigger.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #3
SunFounder Lab 4 Relay Module 5V 4 Channels Relay Module Compatible with Arduino R3 1280 Arm PIC AVR STM32
Asin: B00E0NSORY | Ean: 0520141421286 | UPC: 520141421286
Standard Interface That Can Be Controlled Directly By Microcontroller (Compatible With Arduino , 8051, Avr, Pic, Dsp, Arm, Arm, Msp430, Ttl Logic)..
Applications: Supports All Mcu Control, The Industrial Field, Plc Control, Smart Home Control, Vcc System Power And So On..
Indication Led’S For Relay Output Status..
Equiped With High-Current Relay, Ac250v 10A ; Dc30v 10A..
Features
- 5V 4-Channel Relay interface board, and each one needs 15-20mA Driver Current.
- Equiped with high-current relay, AC250V 10A ; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (Compatible with Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
- Indication LED s for Relay output status.
- Applications: Supports all MCU control, The industrial field, PLC control, Smart home control, VCC system Power and so on.
- See more on Amazon...
Brand: SunFounder | Manufacturer: SunFounder
Dimensions: 0.80 x 3.20 x 2.90 inches | Weight: 0.09 Pounds
See On Amazon #4
AEDIKO 4pcs DC 5V Relay Module 1 Channel Relay Switch Relay Board with Optocoupler Isolation Support High or Low Level Trigger
Asin: B095YD3732 | Ean: 0701715480582 | UPC: 701715480582
Optocoupler Isolation:1 Channel Relay Board Use Optocoupler Isolation That Has Strong Driving Ability And Stable Performance ,The Isolation Circuit Prevent Damages To I / O Port By Relay Switch Current.
Wide Application: Dc 5V Relay Module Works Well With Arm /Pic /Avr /Mcu/Raspberry/Cnc Machine/ Ps4 Etc..
Jumper Design: The Relay Module Has A Jumper That You Can Set Rather The Unit State Changes With High Or Low Signal. Has Screw Terminals For Relay (Nc,C,No) And For Input; Coil +, Coil - And Trigger..
Fault-Tolerant Design: Fault Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Operate;All Interfaces Of Relay Can Be Wired Out Through The Terminals Directly,Normally Open And Normally Closed.
Features
- 5V Relay Module: Working Voltage: DC 5V; Maximum Load: AC 250V/10A, DC 30V/10A; Trigger Current of Opto-Isolator: 5mA
- Fault-Tolerant Design: Fault Tolerant Design, Even if the Control Line is Broken, the Relay will not Operate;All Interfaces of Relay can be Wired Out Through the Terminals Directly,Normally Open and Normally Closed
- Optocoupler Isolation:1 Channel Relay Board use Optocoupler Isolation that has Strong Driving Ability and Stable Performance ,The Isolation Circuit Prevent Damages to I / O Port by Relay Switch Current
- Jumper Design: The Relay Module has a Jumper That You Can Set Rather the Unit State Changes with High or Low Signal. Has Screw Terminals for Relay (NC,C,NO) and for Input; Coil +, Coil - and Trigger.
- Wide Application: DC 5V Relay Module Works Well with ARM /PIC /AVR /MCU/Raspberry/CNC Machine/ PS4 etc.
- See more on Amazon...
Brand: AEDIKO | Manufacturer: AEDIKO
Dimensions: 0.72 x 1.90 x 1.02 inches
See On Amazon #5
CG Solid State Relay SSR-25DD DC to DC Input 3-32VDC To Output 5-240VDC 25A Single Phase Plastic Cover
Asin: B08GNSPCND | Ean: 0774297736507 | UPC: 774297736507
♥ Total Size (Approximate):58 X 45 X 32Mm/2.3" X 1.8" X 1.26" (L*W*T); Net Weight:116G; Material:Metal, Plastic, Electronic Parts..
♥ Solid State Relay Ideal For Automatic Process Control Application, A Must Component For Temperature Controller And Other Machinery Control System..
♥ Ssr Application: With A Switch No Spark, No Noise,High Switching Speed,Anti-Corrosion,Moisture-Proof,Anti-Vibration,Long Life.High Reliability,Electromagnetic Compatibility And Other Characteristics..
♥ Product Name: Solid State Module Relay Ssr-25Dd, 3-32Vdc/5-220Vdc ; Current & Frequency:25A,50/60Hz..
Features
- What You Get Each package With 2 mini bag of thermal grease which apply on the back of the SSR to make the temperature dissipate faster.
- Product Name: solid state module relay SSR-25DD, 3-32VDC/5-220VDC ; Current & Frequency:25A,50/60Hz.
- Total size (approximate):58 x 45 x 32mm/2.3 x 1.8 x 1.26 (l*w*t); Net weight:116g; Material:metal, plastic, electronic parts.
- SSR Application: with a switch no spark, no noise,high switching speed,anti-corrosion,moisture-proof,anti-vibration,long life.high reliability,electromagnetic compatibility and other characteristics.
- Solid state relay ideal for automatic process control application, a must component for temperature controller and other machinery control system.
- See more on Amazon...
Brand: CGELE | Manufacturer: CGELE
Weight: 0.00 pounds
See On Amazon #6
5v Relay Module 1 Channel Relay Board for Raspberry Pi with Opto-Isolated High or Low Level Trigger 5v 1 Channel Relay Switch for Arduino
Asin: B09G6H7JDT | Ean: 0734914033952 | UPC: 734914033952
【Adopted Smd Optocoupler Isolation& Jumper Set】- The Isolation Circuit Prevent Damages To I / O Port By Relay Switch Current.The Module Has A Jumper So You Can Set Rather The Unit State Changes With High Or Low Signal. Has Screw Terminals For Relay (Nc,C,No) And For Input; Coil +, Coil - And Trigger..
【Humanization Design On Interfaces】- All Interfaces Can Be Directly Wired Out Through The Terminals.Fault-Tolerant Design;Fault-Tolerant Design,Even If The Control Line Is Broken, The Relay Will Not Operate..
【Wide Application】-These 5V Relay Board Works Well With Arm /Pic /Avr /Mcu/Raspberry/Cnc Machine/ Ps4 Etc..
【Main Specification】- Peak Load Of No Connector: Ac125~250V/10A, Dc28~30V/10A; Trigger Current: 5Ma;The Module Operating Voltage:12V; 4Pcs * 3.1 Mm Fixed Bolt Hole..
Features
- 5V 1 Channel Relay Module - This Relay Board provides a single relay that can be controlled by any 5V digital output from your microcontroller.
- Main Specification - Peak Load of NO Connector: AC125~250V/10A, DC28~30V/10A; Trigger Current: 5mA;The Module Operating Voltage:12V; 4pcs * 3.1 mm Fixed Bolt Hole.
- Adopted SMD Optocoupler Isolation& jumper Set - The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input; Coil +, coil - and trigger.
- Wide Application -These 5v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc.
- Humanization Design On Interfaces - All interfaces can be directly wired out through the terminals.Fault-tolerant design;fault-tolerant design,even if the control line is broken, the relay will not operate.
- See more on Amazon...
Brand: AZKO | Manufacturer: AZKO
Dimensions: 0.10 x 0.10 x 0.10 Inches
See On Amazon #7
ELEGOO 4 Channel DC 5V Relay Module with Optocoupler Compatible with Arduino UNO R3 MEGA 2560 DSP ARM PIC AVR STM32
Asin: B09ZQS2JRD
Working Status Indicator Lights Are Conducive To The Safe Use.
Widely Used For All Mcu Control, Industrial Sector, Plc Control, Smart Home Control. For A Complete Data Sheet For This Relay Board, Please Download It From: Http://Dwz.Win/Uhw.
4-Channel Relay Interface Board, Which Can Be Controlled Directly By A Wide Range Of Microcontrollers Such As Arduino, Avr, Pic, Arm, Plc, Etc. It Is Also Able To Control Various Appliances And Other Equipments With Large Current..
Standard Interface Can Be Directly Connected With Microcontrollers..
Features
- This relay module is 5V active low. Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Working status indicator lights are conducive to the safe use
- 4-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc. It is also able to control various appliances and other equipments with large current.
- Widely used for all MCU control, industrial sector, PLC control, smart home control. For a complete data sheet for this relay board, please download it from: http://dwz.win/UhW
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
See On Amazon #8
Tolako 5v Relay Module 5V Indicator Light LED 1 Channel Relay Module for Arduino ARM PIC AVR MCU
Asin: B00VRUAHLE | Model: BJ-DT0Y-001 | PartNumber: BJ-DT0Y-001 | Ean: 5175501214456
Control Dc Or Ac Signals Can Control The 220V Ac Load.
Useful To Control A Motor, A Led Strip, Or Any Other Module. How To Use It: Just Connect A Digital Output Of Your Board To Your Relay Module, And You Can Control A Power-Demanding Appliance With The Digital Signal.
There Is A Normally Open And Open Normally Closed Contact.
5V - 12 V Control Signal Of The Ttl.
Features
- Microcontroller development board can be used as modules, can be used as appliance control
- 5V - 12 V control signal of the TTL
- Control DC or AC signals can control the 220V AC Load
- There is a normally open and open normally closed contact
- Useful to control a motor, a led strip, or any other module. How to use it: Just connect a digital output of your board to your relay module, and you can control a power-demanding appliance with the digital signal
- See more on Amazon...
Brand: TOLAKO | Manufacturer: Tolako
See On Amazon #9
CG Solid State Relay SSR-25DA DC to AC Input 3-32VDC To Output 24-480VAC 25A Single Phase Plastic Cover
Asin: B08GPJ1V2J | Model: DC to AC 25A | PartNumber: DC to AC 25A | Ean: 0774297736446 | UPC: 774297736446
♥ Total Size (Approximate):58 X 45 X 32Mm/2.3" X 1.8" X 1.26" (L*W*T); Net Weight:116G; Material:Metal, Plastic, Electronic Parts..
♥ Solid State Relay Ideal For Automatic Process Control Application, A Must Component For Temperature Controller And Other Machinery Control System..
♥ Ssr Application: With A Switch No Spark, No Noise,High Switching Speed,Anti-Corrosion,Moisture-Proof,Anti-Vibration,Long Life.High Reliability,Electromagnetic Compatibility And Other Characteristics..
♥ Product Name: Solid State Module Relay Ssr-25Da, 3-32Vdc/24-480Vac ; Current & Frequency:25A,50/60Hz..
Features
- What You Get Each package With 2 mini bag of thermal grease which apply on the back of the SSR to make the temperature dissipate faster.
- Product Name: solid state module relay SSR-25DA, 3-32VDC/24-480VAC ; Current & Frequency:25A,50/60Hz.
- Total size (approximate):58 x 45 x 32mm/2.3 x 1.8 x 1.26 (l*w*t); Net weight:116g; Material:metal, plastic, electronic parts.
- SSR Application: with a switch no spark, no noise,high switching speed,anti-corrosion,moisture-proof,anti-vibration,long life.high reliability,electromagnetic compatibility and other characteristics.
- Solid state relay ideal for automatic process control application, a must component for temperature controller and other machinery control system.
- See more on Amazon...
Brand: CGELE | Manufacturer: CGELE
See On Amazon #10
HiLetgo 2pcs SSR-25DA 25A 250V Solid State Relay Module
Asin: B01N1MMSKI | Model: 3-01-1247-25A | PartNumber: 3-01-1247-25A
Input Voltage: 3-32V Dc.
Control Method: Dc To Ac.
Output Voltage: 24-380V Ac.
Model: Ssr-25Da.
Features
- SSR-25DA 25A 250V Solid State Relay Alloy Heat Sink
- Model: SSR-25DA
- Input voltage: 3-32V DC
- Output voltage: 24-380V AC
- Control Method: DC to AC
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #11
AEDIKO 4pcs DC 5V Relay Module 2 Channel Relay Board with Optocoupler Support High or Low Level Trigger
Asin: B099MC4TJD | Model: AE06233 | PartNumber: AE06233 | Ean: 0701715485006 | UPC: 701715485006
5V Relay Module Is 2 Channel Isolated, Each Relay Can Individually Switch On/Off By An Opto-Isolated Digital Input.
2 Channel Module Equipped With Screwed Terminal Plate And Fixed Bolt Holes,Standard Interface Can Connect With Microcontrollers And Be Controlled By A Wide Range Of Microcontrollers.
Relay Module Designed With Fault-Tolerant , Even If The Control Line Breaks, The Relay Will Not Move; With Optical Coupling Isolation,Triggering More Reliable And Stable.
2 Channel Relay Module 5V Comes With High-Current Relay,Trigger Current : 5Ma.
Features
- 2 Channel Relay Module Voltage : 5V; Normally Open Interfaces Maximum Load : AC 250V/10A, DC 30V/10A
- 2 Channel Relay Module 5V Comes with High-Current Relay,Trigger Current : 5mA
- 5V Relay Module is 2 Channel Isolated, Each Relay Can Individually Switch On/Off by An Opto-Isolated Digital Input
- Relay Module Designed With Fault-Tolerant , Even If The Control Line Breaks, The Relay Will Not Move; With Optical Coupling Isolation,Triggering More Reliable and Stable
- 2 Channel Module Equipped With Screwed Terminal Plate and Fixed Bolt Holes,Standard Interface Can Connect With Microcontrollers and be Controlled by a Wide Range of Microcontrollers
- See more on Amazon...
Brand: AEDIKO | Manufacturer: AEDIKO
Dimensions: 0.70 x 2.00 x 1.00 inches
See On Amazon #12
Valefod DC 5V Relay Module 1-Channel Relay Switch with Optocoupler Isolation High/Low Level Trigger, Pack of 10
Asin: B07WQH63FB | Model: VA-0166 | PartNumber: VA-0166 | Ean: 0793118392173 | UPC: 793118392173
【Fault-Tolerant Design】The Relay Will Not Operate Even If The Control Line Is Disconnected..
【High Compatibility】The Relay Module Can Be Controlled Directly By 5V Logic Signals From Microcontroller(8051, Avr, Pic, Dsp, Arm, Raspberry Pi, Msp430, Ttl Logic Etc).
【Universal Interface】Equipped With Screwed Terminal Plate And Fixed Bolt Holes(Diameter: 3.1 Mm) On Both Sides For Easy Installation..
【Load Range】No(Normally Open) Maximum Load < Ac 250V/10A, < Dc 30V/10A. Trigger Current Of Opto-Isolator: 5Ma..
Features
- Control Devices The 1-channel relay module uses genuine high quality DC5V relay and SMD opto-isolator supporting high/low level trigger, widely apply to control various AC/DC appliances, and other devices with large current.
- Load Range NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA.
- Fault-tolerant Design The relay will not operate even if the control line is disconnected.
- Universal Interface Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- High Compatibility The relay module can be controlled directly by 5V logic signals from microcontroller(8051, AVR, PIC, DSP, ARM, Raspberry Pi, MSP430, TTL logic etc)
- See more on Amazon...
Brand: Valefod | Manufacturer: Valefod
See On Amazon #13
4 pcs DC 5V 1 Channel Relay Module Board Shield High/Low Level Trigger with Optocoupler
Asin: B079FJSYGY | Model: WJ-00010 | PartNumber: WJ-00010 | Ean: 6941595311734
Smd Optocoupler Isolation, Strong Driving Ability, Stable Performance; Trigger Current 5Ma.
The Module Can Be Set High Or Low Triggered By Jumper.
The Module Voltage 5V.
Maximum Load: Ac 250V/10A, Dc 30V/10A.
Features
- The module uses genuine quality relay, normally open interfaces
- Maximum load: AC 250V/10A, DC 30V/10A
- SMD optocoupler isolation, strong driving ability, stable performance; trigger current 5mA
- The module voltage 5V
- The module can be set high or low triggered by jumper
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
See On Amazon #14
Hosyond 6Pack 2 Channel DC 5V Relay Module with Optocoupler Relay Board for Arduino Raspberry Pi MEGA2560
Asin: B0C2Z7QF71 | Ean: 0732214748163 | UPC: 732214748163
High Level Or Low Level Trigger. Pull In At Low Level And Release At High Level. The Status Indicator Is On When It Is Pull In, And It Is Release When It Is Released..
Widely Used In All Mcu Control, Industrial Fields, Plc Control, Smart Home Control..
The 2 Channel Relay Interface Board Can Directly Control Arduino, Avr, Pic, Arm, Plc And Other Single-Chip Microcomputers, And Can Also Control Various High-Current Electrical Appliances And Other Equipment..
The Relay Has A Standard Interface And Can Be Directly Connected To The Microcontroller, Which Is Convenient For Wiring. Package Contains 10 Male To Female Dupont Wires..
Features
- The power supply voltage of the relay module is DC5V. The maximum output load is AC250V 10A and DC30V 10A.
- The relay has a standard interface and can be directly connected to the microcontroller, which is convenient for wiring. Package contains 10 male to female DuPont wires.
- High Level or Low Level Trigger. Pull in at low level and release at high level. The status indicator is on when it is pull in, and it is release when it is released.
- The 2 channel relay interface board can directly control Arduino, AVR, PIC, ARM, PLC and other single-chip microcomputers, and can also control various high-current electrical appliances and other equipment.
- Widely used in all MCU control, industrial fields, PLC control, smart home control.
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Weight: 0.41 pounds
Warranty: NO
See On Amazon #15
BlueStars 2PCS Solid State Relay SSR-25DD DC to DC Input 3-32VDC Output 5-200VDC 25A Single Phase Semi-Conductor Relay Module - Pack of 2 - Control 3-32V DC Load 5-200V DC
Asin: B0CX1Q4TG9 | Model: SSR-25DD | PartNumber: SSR-25DD
✅High-Performance Optocoupler: Ssr-25Dd Solid State Relay Is Equipped With A Heat-Dissipating Metal Back Plate And A Copper Terminal Lug For Superior Conductivity. Bluestars Ensures Longevity With A High-Quality Semiconductor Optocoupler, Along With Spark-Proof, Noiseless Operation Via Chemical Contact-Free Action And Zero Cross-Trigger Control. Especially, This Part Is Suitable For Corrosion, Moisture, Dust Resistant And Other Harsh Environments.
✅𝟏𝟎𝟎% 𝐋𝐈𝐅𝐄𝐓𝐈𝐌𝐄 𝐖𝐀𝐑𝐑𝐀𝐍𝐓𝐘: For Any Reason, You're Not Completely Satisfied, You Can Ask For A Replacement Or Full Refund, No Questions Asked. Customer Satisfaction Is Our Relentless Focus. Whenever Problems Come Up, Do Not Hesitate To Let Us Know! Buy With Confidence!.
✅Fairly Easy Installation: Experience Hassle-Free Installation With Our User-Friendly Solid State Relay Ssr-25Dd. Save Time And Effort Without Compromising On Quality - Our Product Is Crafted To Seamlessly Integrate Into Your Setup With Minimal Fuss.
✅Perfect Fit: Solid State Relay Ssr Ssr-25Dd Is Perfect For A Range Of Applications In Household And Industrial Automation, Including Temperature Control, Heating And Cooling Systems, Computer Numerical Control (Cnc) Machinery, Remote Control Setups, And More. It Fits Ssr With The Same Specification: Dc To Dc Input 3-32Vdc To Output 5-200V 25A, Insulation Resistance: 500M Ohm/500Vdc, Ambient Temperature: ~30~+70℃, Off Leakage Current: ≤5Ma.
Features
- FAST SWITCHING: Solid State Relay SSR-25DD is an electronic switching device that switches electrical loads on and off without mechanical contact. Solid state relay has no moving parts to wear out and is able to switch both ON and OFF much faster than mechanical relays. It also offers high isolation between the control circuit and the load circuit, enhancing safety and protecting control circuitry from high-voltage load circuits
- PERFECT FIT: Solid State Relay SSR SSR-25DD is perfect for a range of applications in household and industrial automation, including temperature control, heating and cooling systems, computer numerical control (CNC) machinery, remote control setups, and more. It fits SSR with the same specification: DC to DC Input 3-32VDC to Output 5-200V 25A, Insulation Resistance: 500M Ohm/500VDC, Ambient Temperature: ~30~+70 , Off Leakage Current: 5mA
- HIGH-PERFORMANCE OPTOCOUPLER: SSR-25DD Solid State Relay is equipped with a heat-dissipating metal back plate and a copper terminal lug for superior conductivity. BlueStars ensures longevity with a high-quality semiconductor optocoupler, along with spark-proof, noiseless operation via chemical contact-free action and zero cross-trigger control. Especially, this part is suitable for corrosion, moisture, dust resistant and other harsh environments
- FAIRLY EASY INSTALLATION: Experience hassle-free installation with our user-friendly Solid State Relay SSR-25DD. Save time and effort without compromising on quality - our product is crafted to seamlessly integrate into your setup with minimal fuss
- % : For any reason, you're not completely satisfied, you can ask for a replacement or full refund, no questions asked. Customer satisfaction is our relentless focus. Whenever problems come up, do not hesitate to let us know! Buy with confidence!
- See more on Amazon...
Brand: BlueStars | Manufacturer: BlueStars
Dimensions: 1.00 x 1.00 x 1.00 Inches
See On Amazon #16
YWBL-WH Relay Module One Way 30A Optocoupler Isolation Relay Module High Power Relay High/Low Level Trigger YYG-2(5VDC) (1)
Asin: B07TWH7DZ1 | Model: YWBL-WHn8iqpveuz3-01 | PartNumber: YWBL-WHn8iqpveuz3-01 | Ean: 0707300016563 | UPC: 707300016563
◇ Stable And Reliable: Adopting 9.5Mm Black Barrier Terminal And Standard 30A Terminal, The Relay Module Is Stable And Reliable..
◇ High/Low Level Trigger: The High/Low Level Trigger Of The Relay Module Can Be Switched..
◇ Anti Interference: Made Of The High Quality Miniature Optocoupler, The Relay Module Is Of Anti-Interference Ability, Stable Performance..
◇ Main Feature: Product Name: Optocoupler Isolation Relay Module; Output Capability: Ac 250V/30A, Less Than Dc 30V/30A; Optional Style: Dc5v, Dc12v, Dc24v..
Features
- DC5V/DC12V/DC24V: There are 3 styles for you: DC5V, DC12V, DC24V, you can choose one according to your preference.
- Main Feature: Product Name: Optocoupler Isolation Relay Module; Output Capability: AC 250V/30A, less than DC 30V/30A; Optional Style: DC5V, DC12V, DC24V.
- Stable and Reliable: Adopting 9.5mm black barrier terminal and standard 30A terminal, the relay module is stable and reliable.
- Anti Interference: Made of the high quality miniature optocoupler, the relay module is of anti-interference ability, stable performance.
- High/Low Level Trigger: The high/low level trigger of the relay module can be switched.
- See more on Amazon...
Brand: YWBL-WH | Manufacturer: YWBL-WH
Dimensions: 0.98 x 2.56 x 1.57 Inches
See On Amazon #17
EHDIS Waterproof Relay DC 12V 60A Relay SPDT 5 Pin Relay Car Heavy Duty Split Charge Waterproof Transparent Case, Pack of 5
Asin: B01JKU0730 | Model: 5C10-12V | PartNumber: 5C10-12V | Ean: 0713653050864 | UPC: 713653050864
Composite Housings Protect Against Harsh Temperatures And Severe Under Hood Conditions.
All Parts Are Manufactured To Stringent Quality Requirements. Relays Play A Large Role In The Ever Increasing Amount Of Electronics In Automobiles..
Featuring Brass Or Copper Contacts Where Specified For Extended Wear.
Standard Is A Global Manufacturer Of Original Equipment Ignition Products; Complete Quality Control Is Maintained Through The Manufacturing Process From Componentry To Finished Product.
Features
- 12V 60A 5-pin High-current welded connections for reliability
- Standard is a global manufacturer of original equipment ignition products; complete quality control is maintained through the manufacturing process from componentry to finished product
- Composite housings protect against harsh temperatures and severe under hood conditions
- Featuring brass or copper contacts where specified for extended wear
- All parts are manufactured to stringent quality requirements. Relays play a large role in the ever increasing amount of electronics in automobiles.
- See more on Amazon...
Brand: EHDIS | Manufacturer: EHDIS
See On Amazon #18
AITRIP 10PCS 5V One Channel Relay Module Relay Switch with OPTO Isolation High Low Level Trigger Compatible with Arduino Raspberry pi ARM AVR
Asin: B096M77HCJ | Ean: 0701715466746 | UPC: 701715466746
It Can Be Not Only Used As A Microcontroller Development Board Module, But Also As A Home Appliance Control..
Package And Quantity: 10Pcs 1 Channel 5V Relay Module Shield.
Meet International Safety Standards: The Control Area And The Load Area Have Isolation Tank..
Supply Voltage: 5V Quiescent Current: 4Ma Working Current: 65Ma Trigger Voltage: 0-2V Trigger Current: 2Ma.
Features
- he control DC or AC signal, you can control 220V AC load.
- Supply Voltage: 5V Quiescent Current: 4mA Working Current: 65mA Trigger Voltage: 0-2V Trigger Current: 2mA
- It can be not only used as a microcontroller development board module, but also as a home appliance control.
- Meet International Safety Standards: the control area and the load area have isolation tank.
- Package and Quantity: 10pcs 1 Channel 5V Relay Module Shield
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon #19
ARCELI 5PCS 5V One Channel Relay Module Board Shield 5v Relay Module for PIC AVR DSP ARM for Relay
Asin: B07BVXT1ZK | Model: 00075 | PartNumber: 00075 | Ean: 0613835617826 | UPC: 613835617826
New 5V Relay Module.
100% Brand New.
This Product Contains 5 Modules.
5V Relay Module 1 Way Relay Module.
Features
- Name: kits module
- 5V relay module 1 way relay module
- New 5V relay module
- This product contains 5 modules
- 100% brand new
- See more on Amazon...
Brand: ICQUANZX | Manufacturer: ARCELI
See On Amazon #20
24 Pcs 5v Relay Module One Channel Relay Switch with Optocoupler 5v Relay Board with Opto Isolation Support High and Low Level Trigger, 19.69 x 10.24 x 7.09 Inch
Asin: B0BG49Z2LD | Model: Kigeli-8876 | PartNumber: Kigeli-8876
Stable And Functional: Equipped With Smd Optocoupler Isolation, Relay Switches Are Powerful In Drive Ability, Safe And Reliable To Use, And They Can Support High Level Or Low Level Triggers, Which Can Well Facilitate Your Use.
Size And Compatibility: 5V Relay 1 Channel Measures About 50 X 26 X 18 Cm/ 19.69 X 10.24 X 7.09 Inches, Convenient For Your Installation And Storage; And They Are Compatible With Pic, Arm, Cnc Machine And So On, Versatile To Use.
Fault Tolerance: Relay Module Is Designed With Good Fault Tolerance, The Relay Doesn't Act Even If The Control Line Is Disconnected, Which Is An Intimate And Thoughtful Design For You; And You Can Connect All Interfaces Through The Wiring Terminal, Saving Time And Effort.
Large Quantity: You Can Receive 24 Pieces Of Relay Boards From The Package, Sufficient In Quantity, Exquisite In Workmanship, Enough For You To Use, Replace And Share With Your Family And Others.
Features
- Product Description: 5v relay module's maximum load of the normally open interface: AC 250V/10A, direct current 30V/10A, with trigger current 5mA; It is featured with stable performance and sensitive reaction to make sure a satisfactory using demands
- Large Quantity: you can receive 24 pieces of relay boards from the package, sufficient in quantity, exquisite in workmanship, enough for you to use, replace and share with your family and others
- Stable and Functional: equipped with SMD optocoupler isolation, relay switches are powerful in drive ability, safe and reliable to use, and they can support high level or low level triggers, which can well facilitate your use
- Fault Tolerance: relay module is designed with good fault tolerance, the relay doesn't act even if the control line is disconnected, which is an intimate and thoughtful design for you; And you can connect all interfaces through the wiring terminal, saving time and effort
- Size and Compatibility: 5v relay 1 channel measures about 50 x 26 x 18 cm/ 19.69 x 10.24 x 7.09 inches, convenient for your installation and storage; And they are compatible with PIC, ARM, CNC Machine and so on, versatile to use
- See more on Amazon...
Brand: Kigeli | Manufacturer: Kigeli
Dimensions: 0.71 x 11.81 x 3.94 inches
See On Amazon
Looking For Something Else?
Search