CHENBO - Buying Guide
Last Updated: 05/02/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
CHENBO 620pcs 2.54mm/0.1" Connectors Wire Jumper Cable Pin Header Connector Housing Assortment Kit Male Female Crimp Pin Connector Terminal Pitch With Plastic Box
Asin: B077X8XV2J | Model: model | PartNumber: model | Ean: 6941595311642
These Work Great With All Your Typical Breadboard Style Pin Connectors And Sockets.
This Is A 620Pcs Kit With A Variety Of Connectors 1X1 Pin To 2X6 Pins. It Also Has Plenty Of Terminals And Straight Header Pins. Made Of High Quality Plastic And Metal, Durable In Use..
Good For Home Electronics Prototyping..
Compatible Wire Gauge (Awg):18-26Awg.
Features
- 620 pcs 2.54mm Connector Kit Male Female Wire Jumper and Female Header
- Compatible Wire Gauge (AWG):18-26AWG
- These work great with all your typical breadboard style pin connectors and sockets
- Good for home electronics prototyping.
- This is a 620pcs kit with a variety of connectors 1x1 pin to 2x6 pins. It also has plenty of terminals and straight header pins. Made of high quality plastic and metal, durable in use.
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
See On Amazon #2
4 pcs DC 5V 1 Channel Relay Module Board Shield High/Low Level Trigger with Optocoupler
Asin: B079FJSYGY | Model: WJ-00010 | PartNumber: WJ-00010 | Ean: 6941595311734
Smd Optocoupler Isolation, Strong Driving Ability, Stable Performance; Trigger Current 5Ma.
The Module Can Be Set High Or Low Triggered By Jumper.
The Module Voltage 5V.
Maximum Load: Ac 250V/10A, Dc 30V/10A.
Features
- The module uses genuine quality relay, normally open interfaces
- Maximum load: AC 250V/10A, DC 30V/10A
- SMD optocoupler isolation, strong driving ability, stable performance; trigger current 5mA
- The module voltage 5V
- The module can be set high or low triggered by jumper
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
See On Amazon #3
2Pcs DC 5V 4 Channel Relay Module Board Shield with Optocoupler Isolation Suport High/Low Level Trigger Relay
Asin: B07PSGRFP7 | Model: WHJ-001 | PartNumber: WHJ-001 | Ean: 6934596031275
Can Be Set High Or Low Level Trigger With Jumper.
With Green Power Light, Red Relay Status Indicator Light, Can Directly Reflect The Current Module Working Condition.
With Fault Tolerant Design, Humanized Terminals, Even If The Control Line Is Broken, The Relay Will Not Take Any Action.
Smd Optocoupler Isolation, Strong Driving Ability, Stable Performance; Trigger Current 5Ma.
Features
- Input voltage is 5V, the max load of interface is AC 250V/10A, DC 30V/10A
- SMD optocoupler isolation, strong driving ability, stable performance; trigger current 5mA
- Can be set high or low level trigger with jumper
- With Fault Tolerant Design, humanized terminals, even if the control line is broken, the relay will not take any action
- With green power light, red relay status indicator light, can directly reflect the current module working condition
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
See On Amazon #4
CHENBO 5pcs 3Pin End Stop Limit Switch with Cables,3D Printer Limit Switchs,Mechanical Endstop Switch Module for CR 10 Ender3
Asin: B0921ZSL3Q | Model: W-J-87 | PartNumber: W-J-87 | Ean: 6934596034023
Normally 3Pin Mechanical Limit Switch For 3D Printer.
Package Included: 5Pcs Micro Limit Switches With 1M Cable.
Small And Compact Size, Easy Installation, Just Plug And Play.
3D Printer Accessories Limit Switch 3Pin N/O N/C Control Easy To Use Micro Switch.
Features
- Specailed Limit Switch for Ender-3,CR-10,CR-10S/,other 3D printer
- 3D Printer Accessories Limit Switch 3Pin N/O N/C control easy to use Micro Switch
- Normally 3Pin mechanical limit switch for 3D Printer
- Small and compact size, easy installation, just plug and play
- Package included: 5pcs Micro Limit Switches with 1M cable
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
See On Amazon #5
CHENBO 5pcs/lot 5V 1 Channel Relay Module Board Shield Relay Board Ky-019
Asin: B07874KSLY | Model: 8541585730 | PartNumber: 8541585730 | Ean: 6941595311673
Power Indicator Light.
Can Be Used As Microcontroller Development Board Module Can Be Used As Home Appliance Control.
The Control Signal Dc Or Ac, 220V Ac Load Can Be Controlled..
5 V-12V To Ttl Control Signal.
Features
- 5V Relay Module
- 5 V-12V to TTL control signal
- Power indicator light
- The control signal DC or AC, 220V AC load can be controlled.
- Can be used as microcontroller development board module can be used as home appliance control
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
See On Amazon #6
CHENBO(TM) 5 Pcs HX711 Weighing Sensor Dual-Channel 24 Bit Precision A/D Module Pressure Sensor
Asin: B01D1FECVI | Ean: 6921615407357
Simple Digital Control And Serial Interface: Pin-Driven Controls, No Programming Needed.
This Weighing Sensor Amplifier Module Can Use To Be Weight Scales, Kitchen Scale, Industrial Process Control And So On.Size:25Mmx15mm/1.56"X0.79"(Inch) (Approx).
Selectable 10Sps Or 80Sps Output Data Rate.
On-Chip Active Low Noise Pga With Selectable Gain Of 32, 64 And 128.
Features
- Two selectable differential input channels
- On-chip active low noise PGA with selectable gain of 32, 64 and 128
- Simple digital control and serial interface: pin-driven controls, no programming needed
- Selectable 10SPS or 80SPS output data rate
- This weighing sensor amplifier module can use to be weight scales, kitchen scale, industrial process control and so on.Size:25mmx15mm/1.56x0.79(inch) (approx)
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
See On Amazon #7
6Pcs/lot Xh 2.54 4Pin Stepper Motor Wire F/F White Black Terminal Motor Connector Cables 3d Print Wires ,Length 100cm
Asin: B07D5RCY62 | Ean: 6941595312014
Cable Length: 100Cm.
Note: Light Shooting And Different Displays May Cause The Color Of The Item In The Picture A Little Different From The Real Thing. The Measurement Allowed Error Is +/- 1-3Cm..
6 Cables /Bunch.
Stepper Motor Cable For The Most Common Nema 17 Steppers Found On 3D Printers..
Features
- This has the standard JST stepper connector with 4 pins wired on the stepper end, and a 4-pin 2.54mm Motor connector on the controller board end.
- Stepper motor cable for the most common NEMA 17 steppers found on 3D printers.
- Cable Length: 100cm
- 6 Cables /bunch
- Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
Weight: 0.16 pounds
See On Amazon #8
CHENBO 5Pcs GY-68 BMP180 Barometric Pressure Temperature Sensor Module Replace BMP085
Asin: B089LKH1WG | Ean: 6934596033354
Bmp180 Uses A Powerful 8-Pin Leadless Ceramic Chip Can Be Directly Connected With A Variety Of Microprocessor Via I2c..
Application For:Gps Precise Navigation;Indoor And Outdoor Navigation;Leisure, Sports And Medical Health Monitoring;Weather Forecast;Vertical Speed Indication..
Pressure Range: 300 ~ 1100Hpa (+9000M To -500M).
The Absolute Accuracy Of The Lowest Can Reach 0.03Hpa, And Low Power Consumption, Only 3Μ A..
Features
- BMP180 is a high-precision, small size, ultra-low power pressure sensor that can be used in mobile devices, perfect for your Arduino project.
- The absolute accuracy of the lowest can reach 0.03hPa, and low power consumption, only 3 A.
- BMP180 uses a powerful 8-pin leadless ceramic chip can be directly connected with a variety of microprocessor via I2C.
- Pressure range: 300 ~ 1100hPa (+9000m to -500m)
- Application for:GPS precise navigation;Indoor and outdoor navigation;Leisure, sports and medical health monitoring;Weather forecast;Vertical speed indication.
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
Weight: 0.02 pounds
See On Amazon #9
CHENBO 6pcs TCRT5000 Infrared Reflective IR Photoelectric Switch Barrier Line Track Sensor Module w/Cable 3.3V-5V
Asin: B07F1R2DJ3 | Ean: 6934596030759
With Many Adjustable Precision Potentiometer To Adjust Sensitivity.
The Working Voltage :3.3V To 5V.
Using Infrared Reflection Sensors Tcrt5000.
Test Reflection Distance: 1Mm To 25Mm.
Features
- TCRT5000 sensor of infrared emission diode constantly launch infrared
- Test reflection distance: 1mm to 25mm
- With many adjustable precision potentiometer to adjust sensitivity
- Using infrared reflection sensors TCRT5000
- The working voltage :3.3V to 5V
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
See On Amazon #10
CHENBO(TM)3 Pack 12V DC Digital Cooling/Heating Thermostat Temp Control -50-110 c Temperature Controller 10A Relay Module with Waterproof Sensor Probe
Asin: B01E5ALKPO | Ean: 6921615406831
Input Power: Dc12v.
Size: 48 (L) * 40 (W) * 14 (D) Mm.
Measuring Inputs: Ntc (10K 0.5%) Waterproof Sensor 0.5M..
Resolution: -9.9 To 99.9 Is 0.1° C , 1 ° C Temperature Ranges Other.
Features
- Temperature control range: -50 ~ 110 C
- Resolution: -9.9 to 99.9 is 0.1 C , 1 C temperature ranges other
- Input Power: DC12V
- Measuring inputs: NTC (10K 0.5%) Waterproof sensor 0.5M.
- Size: 48 (L) * 40 (W) * 14 (D) mm
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
Weight: 0.00 pounds
See On Amazon #11
1 Channel 3V Relay High Level Driver Module Optocoupler Relay Module for ESP8266 Based Board
Asin: B0798CZDR9 | Model: 43188-345261 | PartNumber: 43188-345261 | Ean: 6941595311741
Signal Input Port Can Connect Microcontroller Io Port, High Level Signal.
Current Wide Detection Range:Dc0-25V Input.
Double Power Selection Design Anti-Interference Ability Is Strong, Photoelectric Isolation Protection Of High Reliability.
Instructions With The Signal Output.
Features
- 1 Channel 3V Relay High Level Driver Module Optocoupler Relay Module Isolated Drive Control Board
- Instructions with the signal output
- Signal input port can connect microcontroller IO port, high level signal
- Double power selection design anti-interference ability is strong, photoelectric isolation protection of high reliability
- Current wide detection range:DC0-25V input
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
See On Amazon #12
CHENBO(TM)4Pcs 50kg Load Cell Body Scale Weight Weighting Sensor Half-bridge/Amplifier with 1pcs HX711 A/D Module
Asin: B07D6HYYSN | Ean: 6941595311994
Load Cell Specs - 34 Mm X 34 Mm.
Package:4 X Human Scale Load Cell Sensor ; 1X Hx711 Module.
Hx711 Specs-Selectable 10Sps Or 80Sps Output Data Rate;Operation Supply Voltage Range: 2.6 ~ 5.5V.
Hx711-This Module Uses 24 High Precision A/D Converter Chip Hx711. It Is A Specially Designed For The High Precision Electronic Scale Designwith Two Analog Input Channelthe Internal Integration Of 128 Times The Programmable Gain Amplifier. The Input Circuit Can Be Configured To Provide A Bridge Type Pressure Bridge (Such As Pressureweighing Sensor Mode)Is Of High Precisionlow Cost Is An Ideal Sampling Front-End Module..
Features
- Load cell-This load sensor, sometimes called a strain gauge, is the same one found in digital bathroom scales (you know, the ones you use in January for your New Year s resolutions, and then forget about a month later).
- HX711-This module uses 24 high precision A/D converter chip hx711. It is a specially designed for the high precision electronic scale designwith two analog input channelthe internal integration of 128 times the programmable gain amplifier. The input circuit can be configured to provide a bridge type pressure bridge (such as pressureweighing sensor mode)is of high precisionlow cost is an ideal sampling front-end module.
- LOAD CELL SPECS - 34 mm x 34 mm
- Hx711 SPECS-Selectable 10SPS or 80SPS output data rate;Operation supply voltage range: 2.6 ~ 5.5V
- Package:4 x human scale load cell sensor ; 1X HX711 Module
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
See On Amazon #13
CHENBO 10kg Load Cell Weight Sensor + HX711 ADC Converter Breakout Module Scale Load Cell Weight Weighing
Asin: B07Q5D9QB9 | Model: HX-20769 | PartNumber: HX-20769 | Ean: 6934596031299
On-Chip Active Low Noise Pga With Selectable Gain Of 32, 64 And 128.
Selectable 10Sps Or 80Sps Output Data Rate.
Simple Digital Control And Serial Interface: Pin-Driven Controls, No Programming Needed.
Input End: Red+, Black-; Output End: Green+, White-; Excitation Voltage: 5-10V Dc.
Features
- Sturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurate measures forces from 0-10kg .
- Input End: Red+, Black-; Output End: Green+, White-; Excitation Voltage: 5-10V DC
- On-chip active low noise PGA with selectable gain of 32, 64 and 128
- Simple digital control and serial interface: pin-driven controls, no programming needed
- Selectable 10SPS or 80SPS output data rate
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
See On Amazon #14
CHENBO 5kg Load Cell Weight Sensor + HX711 Weight Weighing A/d Module Pressure Sensor
Asin: B078JX3KJN | Model: NCOREDSHKF7937 | PartNumber: NCOREDSHKF7937 | Ean: 6941595311710
On-Chip Active Low Noise Pga With Selectable Gain Of 32, 64 And 128.
Selectable 10Sps Or 80Sps Output Data Rate.
Simple Digital Control And Serial Interface: Pin-Driven Controls, No Programming Needed.
Input End: Red+, Black-; Output End: Green+, White-; Excitation Voltage: 5-10V Dc.
Features
- Sturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurate measures forces from 0-5kg (0-11 lb).
- Input End: Red+, Black-; Output End: Green+, White-; Excitation Voltage: 5-10V DC
- On-chip active low noise PGA with selectable gain of 32, 64 and 128
- Simple digital control and serial interface: pin-driven controls, no programming needed
- Selectable 10SPS or 80SPS output data rate
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
See On Amazon #15
CHENBO 6pcs DC 5V-36V 400W MOS FET Trigger Switch Board Driving Module PWM Adjustment Electronic Switch Control Board Motor Speed Controller
Asin: B099RF72R1 | Ean: 6934596034078
Adopts Double Mos Parallel Active Output To Show Lower Internal Resistance,Greater Electric Current And Power. Besides It Works At 15A,400W Under Common Temperature Which Satisfies Most Devices Usage And Realizes The Control Of Great Power Devices In A Relaxed Way..
Wide Application: High Power Devices, Motors, Light Bulbs, Led Lamp Belt, Dc Motor, Micro Pump, Solenoid Valve, Etc., Can Input, Pwm Control Motor Speed, The Brightness Of The Lamp, Etc..
Trigger Signal Source: Digital High And Low Level (Dc3.3V --20V), Can Connect Microcontroller Io Port, Plc Interface, Dc Power Supply, Can Connect Signal, Signal Frequency 0--20Khz Perfect Support..
Working Temperature: - 40-85℃;Size: 1.34X0.7X0.5Inch/3.4 X 1.7 X1.2Cm(L*W*H).
Features
- Operating Voltage: DC DC 5V--36V; continuous current 15A at normal temperature;power: 400W;The maximum current can reach 30A under auxiliary cooling conditions.
- Working temperature: - 40-85 ;Size: 1.34x0.7x0.5inch/3.4 x 1.7 x1.2cm(L*W*H)
- Adopts double MOS parallel active output to show lower internal resistance,greater electric current and power. Besides it works at 15A,400W under common temperature which satisfies most devices usage and realizes the control of great power devices in a relaxed way.
- Trigger signal source: Digital high and low level (dc3.3v --20V), can connect microcontroller IO port, PLC interface, dc power supply, can connect signal, signal frequency 0--20KHZ perfect support.
- Wide application: high power devices, motors, light bulbs, LED lamp belt, dc motor, micro pump, solenoid valve, etc., can input, PWM control motor speed, the brightness of the lamp, etc.
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
See On Amazon #16
CHENBO 20kg Digital Load Cell Weight Sensor +HX711 Weight Weighing A/d Module Pressure Sensor
Asin: B09S6CLRNK | Model: LCT-05688-01 | PartNumber: LCT-05688-01 | Ean: 6934596034122
On-Chip Active Low Noise Pga With Selectable Gain Of 32, 64 And 128.
Selectable 10Sps Or 80Sps Output Data Rate.
Simple Digital Control And Serial Interface: Pin-Driven Controls, No Programming Needed.
Input End: Red+, Black-; Output End: Green+, White-; Excitation Voltage: 5-10V Dc.
Features
- Sturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurate measures forces from 0-20kg.
- Input End: Red+, Black-; Output End: Green+, White-; Excitation Voltage: 5-10V DC
- On-chip active low noise PGA with selectable gain of 32, 64 and 128
- Simple digital control and serial interface: pin-driven controls, no programming needed
- Selectable 10SPS or 80SPS output data rate
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
See On Amazon