Evdoctor - Buying Guide

Bestselling from Evdoctor on Amazon

1. EV Charger Repair Tool Maxi, A Quick Pocket Go NoGo Test for All EV Charger - J1772, Type 1, Tesla, ...
2. Fits Toyota Prius Prime. The Amazing EVDOUBLER is a Low Cost Upgrade Adapter, Just Plug it in, Charg...
3. Fits Hyundai Ioniq Sonata Kona. The Amazing EVDOUBLER is a Low Cost Upgrade Adapter, Just Plug it in...
4. Fits Fiat. The Amazing EVDOUBLER is a Low Cost Upgrade Adapter, Just Plug it in, Charges Fast Like a...
5. Fits Bolt, Volt, Ford, Chrysler, Prius, Fiat & More. The Amazing EVDOUBLER a Low Cost Upgrade for Yo...
6. Fits Toyota Prius Prime. The Amazing EVDOUBLER is a Low Cost Upgrade Adapter, Just Plug it in for Fa...
7. Fits Bolt, Volt, Ford, Chrysler, Prius, Fiat & More. The Amazing EVDOUBLER a Low Cost Upgrade for Yo...
8. Fits Toyota Prius Prime. The Amazing EVDOUBLER is a Low Cost Upgrade Adapter, Just Plug it in for Fa...
9. Fits Toyota Prius Prime. The Amazing EVDOUBLER is a Low Cost Upgrade Adapter, Just Plug it in, Charg...
10. Fits Ford Fusion Focus C-Max Energi. The Amazing EVDOUBLER is a Low Cost Upgrade Adapter, Just Plug ...

Features

• The EVDoctor EVSE Repair Tool MAXI is designed for installation and repair of all EV Chargers (Electrical Vehicle Car Chargers) - J1772, Type 1, Tesla, CSS, Type 2. Just plug in the EVSE Tester for a quick Go NoGo EV Charger test. No additional equipment required for basic testing. WE WILL HELP YOU. FREE
• The EV Charger Status is displayed on 2 LED s - PILOT (green) and 1 kHz (pilot active - (blue). For advanced testing, knowledge of the EVSE and EVSE handle operation is assumed. See resources below. A carrying case is included. (3.8x2.8x 1).
• OPERATION - See pinout photos in this listing 1) Insert the EVSE Tester leads into the Ground and Pilot pins of the EVSE handle. 2) and set the Connect and Charge switches Off (Left). 3) Plug in EVSE to AC Power. Observe the PILOT LED (green) On. 4) Set Connect to On (right). The PILOT LED (green) and the 1kHZ LED (blue) are On. 5) Set Charge to On. Hear EVSE audible click (power on) and the Green LED dims slightly. If there is 240V on your EVSE output it is working!
• ADVANCED TESTING - Additional measurements of the Pilot, P Max and P Min test point voltages can be made with a low cost digital voltmeter. The P Max and P Min represent the peaks (+ -) of the 1 kHz Pilot signal. You can estimate the charging current by measuring the DC value of the Pilot signal (See Table). Also test the proximity switch in the EVSE handle for 480 ohms (latch open) and 150 ohms when pressed. A low cost digital oscilloscope is needed to measure the 1 kHz Pilot signal waveform.
• RESOURCES and HELP - See listing photos for EVSE handle pin outs, tester operation and test voltages. The testing and theory of operation of all EVSEs is similar. The J1772 testing and theory of operation will be provided on request. Contact us at any time 24/7. We will help you at no cost.
• See more on Amazon...

Features

• PARTIAL COMPATIBLE VEHICLE LIST: Double Click LISTING PHOTO or browse Amazon Latest List of EVDOUBLER 240V Compatible Vehicles" CHECK MODEL# ON CHARGER: fits Chrysler Pacifica 2016-2019; fits Chevy 2016-2019; fits Fiat 2013-2019; fits Ford Fusion, Focus, C-Max, Energi; fits Honda Clarity 2014-2019 model# 1T210-5WJ-A0; fits Hyundai Ioniq, Sonata, Kona 2017-2019; fits Toyota Prius Prime model#G9060-4731, fits TESLA Gen 2, fits VW eGolf. FREE EVDOUBLER if your 2020 EV is not listed
• SPECIFICATIONS - The EVDOUBLER-1030 adapter is ~10 long & rated at 15A. It connects a 120V Level 1 charger to a 3 pin 240V 10-30R wall outlet typically used for dryers. See SAFETY SEAL information below
• HOW IT WORKS - This EVDOUBLER works by connecting your EV Charger to a 240V (or two 120V) outlets. This is possible because many chargers have a 240V European Design which will work internationally on upto 250V. The US version just has a new 120V label and power cord. CAUTION IS REQUIRED. The EVDOUBLER is only for use with compatible EV Chargers. DOUBLE CLICK the LISTING PHOTO or BROWSE Amazon for (List of EVDOUBLER 240V compatible Vehicles).
• SAFETY SEAL CAUTION - EVDoctor provides an industry leading Red Safety Seal to semi-permanently seal your 120V plug to the EVDOUBLER. This is important because the the 120V plug on the EVDOUBLER actually outputs 240V. If you plug another device into the EVDOUBLER it will be damaged. The EVDOUBLER is only for use with compatible EVSE s.
• EVDOCTOR EXCLUSIVE BONUS ITEM - This listing includes: an EV s Save The Planet sticker (Display it with EV Pride). Ask us if you would like an EV Rain Bonnet to protect your charger outdoors. We will send you 2, one of you and one to give to a friend.
• See more on Amazon...

Features

• PARTIAL COMPATIBLE VEHICLE LIST: Double Click LISTING PHOTO or browse Amazon Latest List of EVDOUBLER 240V Compatible Vehicles" CHECK MODEL# ON CHARGER: fits Chrysler Pacifica 2016-2019; fits Chevy 2016-2019; fits Fiat 2013-2019; fits Ford Fusion, Focus, C-Max, Energi; fits Honda Clarity 2014-2019 model# 1T210-5WJ-A0; fits Hyundai Ioniq, Sonata, Kona 2017-2019; fits Toyota Prius Prime model#G9060-4731, fits TESLA Gen 2, fits VW eGolf. FREE EVDOUBLER if your 2020 EV is not listed
• SPECIFICATIONS - The EVDOUBLER-1430/50 adapter is ~10 long & rated at 15A. It connects a 120V Level 1 charger to a 4 pin 240V 14-30R or 14-50R wall outlet typically used for dryers, stoves or at RV Parks. See SAFETY SEAL information below.
• HOW IT WORKS - This EVDOUBLER works by connecting your EV Charger to a 240V (or two 120V) outlets. This is possible because many chargers have a 240V European Design which will work internationally on upto 250V. The US version just has a new 120V label and power cord. CAUTION IS REQUIRED. The EVDOUBLER is only for use with compatible EV Chargers. DOUBLE CLICK the LISTING PHOTO or BROWSE Amazon for (List of EVDOUBLER 240V compatible Vehicles).
• SAFETY SEAL CAUTION - EVDoctor provides an industry leading Red Safety Seal to semi-permanently seal your 120V plug to the EVDOUBLER. This is important because the the 120V plug on the EVDOUBLER actually outputs 240V. If you plug another device into the EVDOUBLER it will be damaged. The EVDOUBLER is only for use with compatible EVSE s.
• EVDOCTOR EXCLUSIVE BONUS ITEM - This listing includes: an EV s Save The Planet sticker (Display it with EV Pride). Ask us if you would like an EV Rain Bonnet to protect your charger outdoors. We will send you 2, one of you and one to give to a friend.
• See more on Amazon...

Features

• PARTIAL COMPATIBLE VEHICLE LIST: Double Click LISTING PHOTO or browse Amazon Latest List of EVDOUBLER 240V Compatible Vehicles" CHECK MODEL# ON CHARGER: fits Chrysler Pacifica 2016-2019; fits Chevy 2016-2019; fits Fiat 2013-2019; fits Ford Fusion, Focus, C-Max, Energi; fits Honda Clarity 2014-2019 model# 1T210-5WJ-A0; fits Hyundai Ioniq, Sonata, Kona 2017-2019; fits Toyota Prius Prime model#G9060-4731, fits TESLA Gen 2, fits VW eGolf. FREE EVDOUBLER if your 2020 EV is not listed
• SPECIFICATIONS - The EVDOUBLER-650 adapter is ~10 long & rated at 15A. It connects a 120V Level 1 charger to a 3 pin 240V 6-50R wall outlet typically used for welders. See SAFETY SEAL information below.
• HOW IT WORKS - This EVDOUBLER works by connecting your EV Charger to a 240V (or two 120V) outlets. This is possible because many chargers have a 240V European Design which will work internationally on upto 250V. The US version just has a new 120V label and power cord. CAUTION IS REQUIRED. The EVDOUBLER is only for use with compatible EV Chargers. DOUBLE CLICK the LISTING PHOTO or BROWSE Amazon for (List of EVDOUBLER 240V compatible Vehicles).
• SAFETY SEAL CAUTION - EVDoctor provides an industry leading Red Safety Seal to semi-permanently seal your 120V plug to the EVDOUBLER. This is important because the the 120V plug on the EVDOUBLER actually outputs 240V. If you plug another device into the EVDOUBLER it will be damaged. The EVDOUBLER is only for use with compatible EVSE s
• EVDOCTOR EXCLUSIVE BONUS ITEM - This listing includes: an EV s Save The Planet sticker (Display it with EV Pride). Ask us if you would like an EV Rain Bonnet to protect your charger outdoors. We will send you 2, one of you and one to give to a friend
• See more on Amazon...

Features

• PARTIAL COMPATIBLE VEHICLE LIST: Double Click LISTING PHOTO or browse Amazon Latest List of EVDOUBLER 240V Compatible Vehicles" CHECK MODEL# ON CHARGER: fits Chrysler Pacifica 2016-2019; fits Chevy 2016-2019; fits Fiat 2013-2019; fits Ford Fusion, Focus, C-Max, Energi; fits Honda Clarity 2014-2019 model# 1T210-5WJ-A0; fits Hyundai Ioniq, Sonata, Kona 2017-2019; fits Toyota Prius Prime model#G9060-4731, fits TESLA Gen 2, fits VW eGolf. FREE EVDOUBLER if your 2020 EV is not listed
• SPECIFICATIONS - The EVDOUBLER-1430/50 adapter is ~10 long & rated at 15A. It connects a 120V Level 1 charger to a 4 pin 240V 14-30R or 14-50R wall outlet typically used for dryers, stoves or at RV Parks. See SAFETY SEAL information below.
• HOW IT WORKS - This EVDOUBLER works by connecting your EV Charger to a 240V (or two 120V) outlets. This is possible because many chargers have a 240V European Design which will work internationally on upto 250V. The US version just has a new 120V label and power cord. CAUTION IS REQUIRED. The EVDOUBLER is only for use with compatible EV Chargers. DOUBLE CLICK the LISTING PHOTO or BROWSE Amazon for (List of EVDOUBLER 240V compatible Vehicles).
• SAFETY SEAL CAUTION - EVDoctor provides an industry leading Red Safety Seal to semi-permanently seal your 120V plug to the EVDOUBLER. This is important because the the 120V plug on the EVDOUBLER actually outputs 240V. If you plug another device into the EVDOUBLER it will be damaged. The EVDOUBLER is only for use with compatible EVSE s
• EVDOCTOR EXCLUSIVE BONUS ITEM - This listing includes: an EV s Save The Planet sticker (Display it with EV Pride). Ask us if you would like an EV Rain Bonnet to protect your charger outdoors. We will send you 2, one of you and one to give to a friend.
• See more on Amazon...

Features

• PARTIAL COMPATIBLE VEHICLE LIST: Double Click LISTING PHOTO or browse Amazon Latest List of EVDOUBLER 240V Compatible Vehicles" CHECK MODEL# ON CHARGER: fits Chrysler Pacifica 2016-2019; fits Chevy 2016-2019; fits Fiat 2013-2019; fits Ford Fusion, Focus, C-Max, Energi; fits Honda Clarity 2014-2019 model# 1T210-5WJ-A0; fits Hyundai Ioniq, Sonata, Kona 2017-2019; fits Toyota Prius Prime model#G9060-4731, fits TESLA Gen 2, fits VW eGolf. FREE EVDOUBLER if your 2020 EV is not listed
• INSTALLATION INSTRUCTIONS (MUST READ)- Double click the LISTING PHOTO for complete details. The EVDOUBLER-120V saves the cost of 240V outlet installation for locations without a 240V outlet. The EVDOUBLER-120V must be connected to 2 separate (phases) NON GFCI outlets. You will need 1 or 2 heavy duty extension cords (AWG 14). An outlet tester is included to validate the 120V outlets as well as the proper 240V connection. The EVDOUBLER adapter is ~10 long & rated at 15A.
• HOW IT WORKS - This EVDOUBLER works by connecting your EV Charger to a 240V (or two 120V) outlets. This is possible because many chargers have a 240V European Design which will work internationally on upto 250V. The US version just has a new 120V label and power cord. CAUTION IS REQUIRED. The EVDOUBLER is only for use with compatible EV Chargers. DOUBLE CLICK the LISTING PHOTO or BROWSE Amazon for (List of EVDOUBLER 240V compatible Vehicles).
• SAFETY SEAL CAUTION - EVDoctor provides an industry leading Red Safety Seal to semi-permanently seal your 120V plug to the EVDOUBLER. This is important because the the 120V plug on the EVDOUBLER actually outputs 240V. If you plug another device into the EVDOUBLER it will be damaged. The EVDOUBLER is only for use with compatible EVSE s.
• EVDOCTOR EXCLUSIVE BONUS ITEM - This listing includes: an EV s Save The Planet sticker (Display it with EV Pride). Ask us if you would like an EV Rain Bonnet to protect your charger outdoors. We will send you 2, one of you and one to give to a friend.
• See more on Amazon...

Features

• PARTIAL COMPATIBLE VEHICLE LIST: Double Click LISTING PHOTO or browse Amazon Latest List of EVDOUBLER 240V Compatible Vehicles" CHECK MODEL# ON CHARGER: fits Chrysler Pacifica 2016-2019; fits Chevy 2016-2019; fits Fiat 2013-2019; fits Ford Fusion, Focus, C-Max, Energi; fits Honda Clarity 2014-2019 model# 1T210-5WJ-A0; fits Hyundai Ioniq, Sonata, Kona 2017-2019; fits Toyota Prius Prime model#G9060-4731, fits TESLA Gen 2, fits VW eGolf. FREE EVDOUBLER if your 2020 EV is not listed
• SPECIFICATIONS - The EVDOUBLER-1030 adapter is ~10 long & rated at 15A. It connects a 120V Level 1 charger to a 3 pin 240V 10-30R wall outlet typically used for dryers. See SAFETY SEAL information below
• HOW IT WORKS - This EVDOUBLER works by connecting your EV Charger to a 240V (or two 120V) outlets. This is possible because many chargers have a 240V European Design which will work internationally on upto 250V. The US version just has a new 120V label and power cord. CAUTION IS REQUIRED. The EVDOUBLER is only for use with compatible EV Chargers. DOUBLE CLICK the LISTING PHOTO or BROWSE Amazon for (List of EVDOUBLER 240V compatible Vehicles).
• SAFETY SEAL CAUTION - EVDoctor provides an industry leading Red Safety Seal to semi-permanently seal your 120V plug to the EVDOUBLER. This is important because the the 120V plug on the EVDOUBLER actually outputs 240V. If you plug another device into the EVDOUBLER it will be damaged. The EVDOUBLER is only for use with compatible EVSE s
• EVDOCTOR EXCLUSIVE BONUS ITEM - This listing includes: an EV s Save The Planet sticker (Display it with EV Pride). Ask us if you would like an EV Rain Bonnet to protect your charger outdoors. We will send you 2, one of you and one to give to a friend.
• See more on Amazon...

Features

• PARTIAL COMPATIBLE VEHICLE LIST: Double Click LISTING PHOTO or browse Amazon Latest List of EVDOUBLER 240V Compatible Vehicles" CHECK MODEL# ON CHARGER: fits Chrysler Pacifica 2016-2019; fits Chevy 2016-2019; fits Fiat 2013-2019; fits Ford Fusion, Focus, C-Max, Energi; fits Honda Clarity 2014-2019 model# 1T210-5WJ-A0; fits Hyundai Ioniq, Sonata, Kona 2017-2019; fits Toyota Prius Prime model#G9060-4731, fits TESLA Gen 2, fits VW eGolf. FREE EVDOUBLER if your 2020 EV is not listed
• SPECIFICATIONS - The EVDOUBLER-650 adapter is ~10 long & rated at 15A. It connects a 120V Level 1 charger to a 3 pin 240V 6-50R wall outlet typically used for welders. See SAFETY SEAL information below.
• HOW IT WORKS - This EVDOUBLER works by connecting your EV Charger to a 240V (or two 120V) outlets. This is possible because many chargers have a 240V European Design which will work internationally on upto 250V. The US version just has a new 120V label and power cord. CAUTION IS REQUIRED. The EVDOUBLER is only for use with compatible EV Chargers. DOUBLE CLICK the LISTING PHOTO or BROWSE Amazon for (List of EVDOUBLER 240V compatible Vehicles).
• SAFETY SEAL CAUTION - EVDoctor provides an industry leading Red Safety Seal to semi-permanently seal your 120V plug to the EVDOUBLER. This is important because the the 120V plug on the EVDOUBLER actually outputs 240V. If you plug another device into the EVDOUBLER it will be damaged. The EVDOUBLER is only for use with compatible EVSE s.
• EVDOCTOR EXCLUSIVE BONUS ITEM - This listing includes: an EV s Save The Planet sticker (Display it with EV Pride). Ask us if you would like an EV Rain Bonnet to protect your charger outdoors. We will send you 2, one of you and one to give to a friend.
• See more on Amazon...

Features

• PARTIAL COMPATIBLE VEHICLE LIST: Double Click LISTING PHOTO or browse Amazon Latest List of EVDOUBLER 240V Compatible Vehicles" CHECK MODEL# ON CHARGER: fits Chrysler Pacifica 2016-2019; fits Chevy 2016-2019; fits Fiat 2013-2019; fits Ford Fusion, Focus, C-Max, Energi; fits Honda Clarity 2014-2019 model# 1T210-5WJ-A0; fits Hyundai Ioniq, Sonata, Kona 2017-2019; fits Toyota Prius Prime model#G9060-4731, fits TESLA Gen 2, fits VW eGolf. FREE EVDOUBLER if your 2020 EV is not listed
• SPECIFICATIONS - The EVDOUBLER-1430/50 adapter is ~10 long & rated at 15A. It connects a 120V Level 1 charger to a 4 pin 240V 14-30R or 14-50R wall outlet typically used for dryers, stoves or at RV Parks. See SAFETY SEAL information below.
• HOW IT WORKS - This EVDOUBLER works by connecting your EV Charger to a 240V (or two 120V) outlets. This is possible because many chargers have a 240V European Design which will work internationally on upto 250V. The US version just has a new 120V label and power cord. CAUTION IS REQUIRED. The EVDOUBLER is only for use with compatible EV Chargers. DOUBLE CLICK the LISTING PHOTO or BROWSE Amazon for (List of EVDOUBLER 240V compatible Vehicles).
• SAFETY SEAL CAUTION - EVDoctor provides an industry leading Red Safety Seal to semi-permanently seal your 120V plug to the EVDOUBLER. This is important because the the 120V plug on the EVDOUBLER actually outputs 240V. If you plug another device into the EVDOUBLER it will be damaged. The EVDOUBLER is only for use with compatible EVSE s.
• EVDOCTOR EXCLUSIVE BONUS ITEM - This listing includes: an EV s Save The Planet sticker (Display it with EV Pride). Ask us if you would like an EV Rain Bonnet to protect your charger outdoors. We will send you 2, one of you and one to give to a friend.
• See more on Amazon...

Features

• PARTIAL COMPATIBLE VEHICLE LIST: Double Click LISTING PHOTO or browse Amazon Latest List of EVDOUBLER 240V Compatible Vehicles" CHECK MODEL# ON CHARGER: fits Chrysler Pacifica 2016-2019; fits Chevy 2016-2019; fits Fiat 2013-2019; fits Ford Fusion, Focus, C-Max, Energi; fits Honda Clarity 2014-2019 model# 1T210-5WJ-A0; fits Hyundai Ioniq, Sonata, Kona 2017-2019; fits Toyota Prius Prime model#G9060-4731, fits TESLA Gen 2, fits VW eGolf. FREE EVDOUBLER if your 2020 EV is not listed
• SPECIFICATIONS - The EVDOUBLER-1430/50 adapter is ~10 long & rated at 15A. It connects a 120V Level 1 charger to a 4 pin 240V 14-30R or 14-50R wall outlet typically used for dryers, stoves or at RV Parks. See SAFETY SEAL information below.
• HOW IT WORKS - This EVDOUBLER works by connecting your EV Charger to a 240V (or two 120V) outlets. This is possible because many chargers have a 240V European Design which will work internationally on upto 250V. The US version just has a new 120V label and power cord. CAUTION IS REQUIRED. The EVDOUBLER is only for use with compatible EV Chargers. DOUBLE CLICK the LISTING PHOTO or BROWSE Amazon for (List of EVDOUBLER 240V compatible Vehicles).
• SAFETY SEAL CAUTION - EVDoctor provides an industry leading Red Safety Seal to semi-permanently seal your 120V plug to the EVDOUBLER. This is important because the the 120V plug on the EVDOUBLER actually outputs 240V. If you plug another device into the EVDOUBLER it will be damaged. The EVDOUBLER is only for use with compatible EVSE s.
• EVDOCTOR EXCLUSIVE BONUS ITEM - This listing includes: an EV s Save The Planet sticker (Display it with EV Pride). Ask us if you would like an EV Rain Bonnet to protect your charger outdoors. We will send you 2, one of you and one to give to a friend.
• See more on Amazon...

Features

• PARTIAL COMPATIBLE VEHICLE LIST: Double Click LISTING PHOTO or browse Amazon Latest List of EVDOUBLER 240V Compatible Vehicles" CHECK MODEL# ON CHARGER: fits Chrysler Pacifica 2016-2019; fits Chevy 2016-2019; fits Fiat 2013-2019; fits Ford Fusion, Focus, C-Max, Energi; fits Honda Clarity 2014-2019 model# 1T210-5WJ-A0; fits Hyundai Ioniq, Sonata, Kona 2017-2019; fits Toyota Prius Prime model#G9060-4731, fits TESLA Gen 2, fits VW eGolf. FREE EVDOUBLER if your 2020 EV is not listed
• SPECIFICATIONS - The EVDOUBLER-650 adapter is ~10 long & rated at 15A. It connects a 120V Level 1 charger to a 3 pin 240V 6-50R wall outlet typically used for welders. See SAFETY SEAL information below.
• HOW IT WORKS - This EVDOUBLER works by connecting your EV Charger to a 240V (or two 120V) outlets. This is possible because many chargers have a 240V European Design which will work internationally on upto 250V. The US version just has a new 120V label and power cord. CAUTION IS REQUIRED. The EVDOUBLER is only for use with compatible EV Chargers. DOUBLE CLICK the LISTING PHOTO or BROWSE Amazon for (List of EVDOUBLER 240V compatible Vehicles).
• SAFETY SEAL CAUTION - EVDoctor provides an industry leading Red Safety Seal to semi-permanently seal your 120V plug to the EVDOUBLER. This is important because the the 120V plug on the EVDOUBLER actually outputs 240V. If you plug another device into the EVDOUBLER it will be damaged. The EVDOUBLER is only for use with compatible EVSE s.
• EVDOCTOR EXCLUSIVE BONUS ITEM - This listing includes: an EV s Save The Planet sticker (Display it with EV Pride). Ask us if you would like an EV Rain Bonnet to protect your charger outdoors. We will send you 2, one of you and one to give to a friend.
• See more on Amazon...

Features

• The EVDoctor EV Charger Repair Tool MINI is designed for installation and repair of all EV Chargers (Electrical Vehicle Car Chargers) - J1772, Type 1, Tesla, CSS, Type 2. Just plug in the EVSE Tester for a quick Go NoGo EV Charger test. No additional equipment required for basic testing. WE WILL HELP YOU. FREE
• The EV Charger Status is displayed on 2 LED s - PILOT (green) and 1 kHz (pilot active - (blue). For advanced testing, knowledge of the EVSE and EVSE handle operation is assumed. See resources below. A carrying case is included. (6.1x1.25x0.75).
• OPERATION - See the EVSE Handle pinout photos in this listing 1) Insert the EVSE Tester leads into the Ground and Pilot pins of the EVSE handle. 2) If the Pilot (Green) and 1 Khz (Blue) leds are on and you hear audible power on click the EVSE is working! CAUTION there is 240V AC on the power out pins
• ADDITIONAL TESTING - Use a multimeter to test the proximity switch in the EVSE handle for 480 ohms (latch open) and 150 ohms when pressed. The EV will not charge if this is not working. Also confirm the 240V AC on the output pins.
• RESOURCES and HELP - See listing photos for EVSE handle pin outs and tester operation. The testing and theory of operation of all EVSEs is similar. Browse for EVSE EV Charger Test & Repair Secrets which includes the J1772 testing and theory of operation. Contact us at any time 24/7. We will help you at no cost.
• See more on Amazon...

Features

• The EVDoctor EV Charger Repair Tool MINI is designed for installation and repair of all EV Chargers (Electrical Vehicle Car Chargers) - J1772, Type 1, Tesla, CSS, Type 2. Just plug in the EVSE Tester for a quick Go NoGo EV Charger test. No additional equipment required for basic testing. WE WILL HELP YOU. FREE
• The EV Charger Status is displayed on 2 LED s - PILOT (green) and 1 kHz (pilot active - (blue). For advanced testing, knowledge of the EVSE and EVSE handle operation is assumed. See resources below. A carrying case is included. (6.1x1.25x0.75).
• OPERATION - See the EVSE Handle pinout photos in this listing 1) Insert the EVSE Tester leads into the Ground and Pilot pins of the EVSE handle. 2) If the Pilot (Green) and 1 Khz (Blue) leds are on and you hear audible power on click the EVSE is working! CAUTION there is 240V AC on the power out pins
• ADDITIONAL TESTING - Use a multimeter to test the proximity switch in the EVSE handle for 480 ohms (latch open) and 150 ohms when pressed. The EV will not charge if this is not working. Also confirm the 240V AC on the output pins.
• RESOURCES and HELP - See listing photos for EVSE handle pin outs and tester operation. The testing and theory of operation of all EVSEs is similar. Browse for EVSE EV Charger Test & Repair Secrets which includes the J1772 testing and theory of operation. Contact us at any time 24/7. We will help you at no cost.
• See more on Amazon...

Features

• The EVDoctor EVSE Repair Tool MAXI is designed for installation and repair of all EV Chargers (Electrical Vehicle Car Chargers) - J1772, Type 1, Tesla, CSS, Type 2. Just plug in the EVSE Tester for a quick Go NoGo EV Charger test. No additional equipment required for basic testing. WE WILL HELP YOU. FREE
• The EV Charger Status is displayed on 2 LED s - PILOT (green) and 1 kHz (pilot active - (blue). For advanced testing, knowledge of the EVSE and EVSE handle operation is assumed. See resources below. A carrying case is included. (3.8x2.8x 1).
• OPERATION - See pinout photos in this listing 1) Insert the EVSE Tester leads into the Ground and Pilot pins of the EVSE handle. 2) and set the Connect and Charge switches Off (Left). 3) Plug in EVSE to AC Power. Observe the PILOT LED (green) On. 4) Set Connect to On (right). The PILOT LED (green) and the 1kHZ LED (blue) are On. 5) Set Charge to On. Hear EVSE audible click (power on) and the Green LED dims slightly. If there is 240V on your EVSE output it is working!
• ADVANCED TESTING - Additional measurements of the Pilot, P Max and P Min test point voltages can be made with a low cost digital voltmeter. The P Max and P Min represent the peaks (+ -) of the 1 kHz Pilot signal. You can estimate the charging current by measuring the DC value of the Pilot signal (See Table). Also test the proximity switch in the EVSE handle for 480 ohms (latch open) and 150 ohms when pressed. A low cost digital oscilloscope is needed to measure the 1 kHz Pilot signal waveform.
• RESOURCES and HELP - See listing photos for EVSE handle pin outs, tester operation and test voltages. The testing and theory of operation of all EVSEs is similar. The J1772 testing and theory of operation will be provided on request. Contact us at any time 24/7. We will help you at no cost.
• See more on Amazon...

Features

• The SIMPLE EV240 is a quick and easy way to plug in a 240V electric vehicle charger (EVSE). A 240V outlet is NOT REQUIRED. It has a 240V on one end and two 5-15P (120V) plugs on the other. Two non GFCI lightly loaded 120V outlets on opposite circuits/phases are required. When charging more than 12A use 20A NEMA 5-20R outlets.
• NOTE: The SIMPLE EV240 is for L1 or L2 chargers with a MAX CURRENT of 20A. If your charger is capable of more than 20A or your outlets are overloaded, you will have to limit the charging rate via controls in your EV. When charging more than 12A use 20A NEMA 5-20R outlets.
• INSTALLATION: The SIMPLE EV240 plugs into two standard 120V (5-15R) household outlets. The 120V outlets must be non-GFCI, lightly loaded and on separate circuits/phases. Typically 1 or 2 heavy duty (awg 14) extension cords (not included) are required to reach the compatible 120V outlets. When charging more than 12A use NEMA 5-20R 20A outlets. For more details browse Amazon SIMPLE EV240
• TESTING: Plug in the SIMPLE EV240, Use the red 120/240V voltage tester to check the power pins for 240V. If OK you are ready to go. If not plug into another outlet, possibly in another room. Plug in the EV Charger and verify charging. If the power shuts off you may be connected to a GFCI outlet or the EV Charger is drawing too much current (reduce current on your charger or EV to 20A or less). IMPORTANT NOTE: TOUCH ALL THE PLUGS AFTER 1+ HOURS OF CHARGING. STOP CHARGING IF HOT LIKE COFFEE
• TRAVEL: The SIMPLE EV240 is ideal for a back up when traveling and a 240V outlet is not available. It is ~10 long, lightweight and easy to store or carry. Be sure to bring the 240V tester with you. DETAILED iNSTALLATION - Browse for SIMPLE EV240 Installation, SAFETY FAQ - Browse for SIMPLE EV240 Safety Questions - FAQ
• See more on Amazon...

Features

• PARTIAL COMPATIBLE VEHICLE LIST: Double Click LISTING PHOTO or browse Amazon Latest List of EVDOUBLER 240V Compatible Vehicles" CHECK MODEL# ON CHARGER: fits Chrysler Pacifica 2016-2019; fits Chevy 2016-2019; fits Fiat 2013-2019; fits Ford Fusion, Focus, C-Max, Energi; fits Honda Clarity 2014-2019 model# 1T210-5WJ-A0; fits Hyundai Ioniq, Sonata, Kona 2017-2019; fits Toyota Prius Prime model#G9060-4731, fits TESLA Gen 2, fits VW eGolf. FREE EVDOUBLER if your 2020 EV is not listed
• SPECIFICATIONS - The EVDOUBLER-620 is a heavy duty adapter rated at 15A. It connects a 120V Level 1 charger to a 3 pin 240V 6-20R wall outlet typically used for air conditioners and small dryers. See SAFETY SEAL information below.
• HOW IT WORKS - This EVDOUBLER works by connecting your EV Charger to a 240V (or two 120V) outlets. This is possible because many chargers have a 240V European Design which will work internationally on upto 250V. The US version just has a new 120V label and power cord. CAUTION IS REQUIRED. The EVDOUBLER is only for use with compatible EV Chargers. DOUBLE CLICK the LISTING PHOTO or BROWSE Amazon for (List of EVDOUBLER 240V compatible Vehicles).
• SAFETY SEAL CAUTION - EVDoctor provides an industry leading Red Safety Seal to semi-permanently seal your 120V plug to the EVDOUBLER. This is important because the the 120V plug on the EVDOUBLER actually outputs 240V. If you plug another device into the EVDOUBLER it will be damaged. The EVDOUBLER is only for use with compatible EVSE s
• EVDOCTOR EXCLUSIVE BONUS ITEM - This listing includes: an EV s Save The Planet sticker (Display it with EV Pride). Ask us if you would like an EV Rain Bonnet to protect your charger outdoors. We will send you 2, one of you and one to give to a friend.
• See more on Amazon...

Features

• PARTIAL COMPATIBLE VEHICLE LIST: Double Click LISTING PHOTO or browse Amazon Latest List of EVDOUBLER 240V Compatible Vehicles" CHECK MODEL# ON CHARGER: fits Chrysler Pacifica 2016-2019; fits Chevy 2016-2019; fits Fiat 2013-2019; fits Ford Fusion, Focus, C-Max, Energi; fits Honda Clarity 2014-2019 model# 1T210-5WJ-A0; fits Hyundai Ioniq, Sonata, Kona 2017-2019; fits Toyota Prius Prime model#G9060-4731, fits TESLA Gen 2, fits VW eGolf. FREE EVDOUBLER if your 2020 EV is not listed
• SPECIFICATIONS - The EVDOUBLER-620 is a heavy duty adapter rated at 15A. It connects a 120V Level 1 charger to a 3 pin 240V 6-20R wall outlet typically used for air conditioners and small dryers. See SAFETY SEAL information below.
• HOW IT WORKS - This EVDOUBLER works by connecting your EV Charger to a 240V (or two 120V) outlets. This is possible because many chargers have a 240V European Design which will work internationally on upto 250V. The US version just has a new 120V label and power cord. CAUTION IS REQUIRED. The EVDOUBLER is only for use with compatible EV Chargers. DOUBLE CLICK the LISTING PHOTO or BROWSE Amazon for (List of EVDOUBLER 240V compatible Vehicles).
• SAFETY SEAL CAUTION - EVDoctor provides an industry leading Red Safety Seal to semi-permanently seal your 120V plug to the EVDOUBLER. This is important because the the 120V plug on the EVDOUBLER actually outputs 240V. If you plug another device into the EVDOUBLER it will be damaged. The EVDOUBLER is only for use with compatible EVSE s
• EVDOCTOR EXCLUSIVE BONUS ITEM - This listing includes: an EV s Save The Planet sticker (Display it with EV Pride). Ask us if you would like an EV Rain Bonnet to protect your charger outdoors. We will send you 2, one of you and one to give to a friend.
• See more on Amazon...

Features

• PARTIAL COMPATIBLE VEHICLE LIST: Double Click LISTING PHOTO or browse Amazon Latest List of EVDOUBLER 240V Compatible Vehicles" CHECK MODEL# ON CHARGER: fits Chrysler Pacifica 2016-2019; fits Chevy 2016-2019; fits Fiat 2013-2019; fits Ford Fusion, Focus, C-Max, Energi; fits Honda Clarity 2014-2019 model# 1T210-5WJ-A0; fits Hyundai Ioniq, Sonata, Kona 2017-2019; fits Toyota Prius Prime model#G9060-4731, fits TESLA Gen 2, fits VW eGolf. FREE EVDOUBLER if your 2020 EV is not listed
• SPECIFICATIONS - The EVDOUBLER-1030 adapter is ~10 long & rated at 15A. It connects a 120V Level 1 charger to a 3 pin 240V 10-30R wall outlet typically used for dryers. See SAFETY SEAL information below
• HOW IT WORKS - This EVDOUBLER works by connecting your EV Charger to a 240V (or two 120V) outlets. This is possible because many chargers have a 240V European Design which will work internationally on upto 250V. The US version just has a new 120V label and power cord. CAUTION IS REQUIRED. The EVDOUBLER is only for use with compatible EV Chargers. DOUBLE CLICK the LISTING PHOTO or BROWSE Amazon for (List of EVDOUBLER 240V compatible Vehicles).
• SAFETY SEAL CAUTION - EVDoctor provides an industry leading Red Safety Seal to semi-permanently seal your 120V plug to the EVDOUBLER. This is important because the the 120V plug on the EVDOUBLER actually outputs 240V. If you plug another device into the EVDOUBLER it will be damaged. The EVDOUBLER is only for use with compatible EVSE s.
• EVDOCTOR EXCLUSIVE BONUS ITEM - This listing includes: an EV s Save The Planet sticker (Display it with EV Pride). Ask us if you would like an EV Rain Bonnet to protect your charger outdoors. We will send you 2, one of you and one to give to a friend.
• See more on Amazon...

Features

• PARTIAL COMPATIBLE VEHICLE LIST: Double Click LISTING PHOTO or browse Amazon Latest List of EVDOUBLER 240V Compatible Vehicles" CHECK MODEL# ON CHARGER: fits Chrysler Pacifica 2016-2019; fits Chevy 2016-2019; fits Fiat 2013-2019; fits Ford Fusion, Focus, C-Max, Energi; fits Honda Clarity 2014-2019 model# 1T210-5WJ-A0; fits Hyundai Ioniq, Sonata, Kona 2017-2019; fits Toyota Prius Prime model#G9060-4731, fits TESLA Gen 2, fits VW eGolf. FREE EVDOUBLER if your 2020 EV is not listed
• SPECIFICATIONS - The EVDOUBLER-650 adapter is ~10 long & rated at 15A. It connects a 120V Level 1 charger to a 3 pin 240V 6-50R wall outlet typically used for welders. See SAFETY SEAL information below.
• HOW IT WORKS - This EVDOUBLER works by connecting your EV Charger to a 240V (or two 120V) outlets. This is possible because many chargers have a 240V European Design which will work internationally on upto 250V. The US version just has a new 120V label and power cord. CAUTION IS REQUIRED. The EVDOUBLER is only for use with compatible EV Chargers. DOUBLE CLICK the LISTING PHOTO or BROWSE Amazon for (List of EVDOUBLER 240V compatible Vehicles).
• SAFETY SEAL CAUTION - EVDoctor provides an industry leading Red Safety Seal to semi-permanently seal your 120V plug to the EVDOUBLER. This is important because the the 120V plug on the EVDOUBLER actually outputs 240V. If you plug another device into the EVDOUBLER it will be damaged. The EVDOUBLER is only for use with compatible EVSE s
• EVDOCTOR EXCLUSIVE BONUS ITEM - This listing includes: an EV s Save The Planet sticker (Display it with EV Pride). Ask us if you would like an EV Rain Bonnet to protect your charger outdoors. We will send you 2, one of you and one to give to a friend.
• See more on Amazon...

Features

• HOME AND TRAVEL USE: This is a Level 1 adapter for a Level 2 16A 240V Electric Vehicle Car Charger (EVSE) with a 14-50P plug. The adapter plugs into a standard 120V outlet. A lifesaver for backup charging when traveling. Keep one in your car to reduce Range Anxiety.
• HIGH QUALITY CONSTRUCTION: All EVDoctor EVPA adapters are made with heavy duty AWG 14 wire and NEMA rated connectors. All terminations are finished with bootlace crimps and screw terminals.
• ADAPTERS AND ACCESSORIES: EVDoctorLLC manufactures a wide range of adapters, wall hangers and travel bags for virtually all Electric Vehicle needs. See our other listings and store for details.
• REPAIR AND RECYCLING: EVDoctorLLC offers a local repair and/or recycling service to save money and keep EV Chargers out of the landfill. We love to answer hard questions.
• EXCLUSIVE BONUS ITEMS - This item includes: an EV Rain Bonnet (give one to a friend that charges outdoors) and an EV s Save The Planet sticker to display with EV Pride.
• See more on Amazon...