Fulton - Buying Guide
Last Updated: 04/27/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Fulton 4 inch Thumb Screw Key Adjustable 304 Stainless Steel Hose Clamps, Pipe Clamp, Worm Gear Clamps, Dryer Vent Clamp, Dust Collection, Automotive, RV Clamp 5 pack (4" Hose Clamp 5 Pack)
Asin: B07PDS9HG3 | Model: Varitaion Hose Clamps | PartNumber: Varitaion Hose Clamps | Ean: 0817918022099 | UPC: 817918022099
Often Used In These Applications – These Unique Clamps Are Typically Used In Securing Duct Work, Dryer Vents, Dust Collection Hoses, Piping, Large Cable, Pvc Tubing And More. Ideal For Use In Automotive, Industrial, Mechanical, Agriculture, Boat/Marine, Shield, Recreational Vehicles, Household And More. Works For Both Indoor Or Outdoor Use..
Flexible Adjustable Size Range- Each Hose Clamp Is Flexible And Workable With A Rather Wide Adjustable Size Range From Appx. 4-7/16” In Full Diameter Down To Appx. 3-7/16” At Its Most Compact Diameter For The 4" Hose Clamps, While The 5" To 6" Hose Clamps Range From 4-1/2" To 6-1/2" In Diameter..
304 Stainless Steel Hose Clamp- The Hose Duct Clamp (Including The Housing, The Band And The Internal Screw Are Made From Premium 304 Stainless Steel. This Makes The Clamp Strong, Durable And Rust Resistant Which Makes It Ideal For Many Applications In The Shop Or Around The Home..
Large Easy To Turn Key - The Easy To Turn And Easy To See Blue Key Is Made From A Strong And Durable Polymer. The Key Is Designed To Make The Securing And Un-Securing Of Hose Much Easier On The Knuckles. No More Knuckle Busting Flat Head Screw Drivers Or Tiny Socket Wrenches. Simply To Turn The Key Clockwise To Tighten, Counter Clockwise To Loosen..
Features
- NO MORE TOOLS! Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them.
- LARGE EASY TO TURN KEY - The easy to turn and easy to see blue key is made from a strong and durable polymer. The key is designed to make the securing and un-securing of hose much easier on the knuckles. No more knuckle busting flat head screw drivers or tiny socket wrenches. Simply to turn the key clockwise to tighten, counter clockwise to loosen.
- OFTEN USED IN THESE APPLICATIONS These unique clamps are typically used in securing duct work, dryer vents, dust collection hoses, piping, large cable, pvc tubing and more. Ideal for use in automotive, industrial, mechanical, agriculture, boat/marine, shield, recreational vehicles, household and more. Works for both indoor or outdoor use.
- 304 STAINLESS STEEL HOSE CLAMP- The hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home.
- FLEXIBLE ADJUSTABLE SIZE RANGE- Each hose clamp is flexible and workable with a rather wide adjustable size range from appx. 4-7/16 in full diameter down to appx. 3-7/16 at its most compact diameter for the 4 hose clamps, while the 5 to 6 hose clamps range from 4-1/2 to 6-1/2 in diameter.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
See On Amazon #2
Peachtree Woodworking Supply 10 Foot Long Dust Collection Power Tool Hose Kit with 5 Fittings/Attachments for Multiple Types/Brands of Power Tools and Work Shop Vacuums
Asin: B0C7CWB3S6 | Model: 11212 | PartNumber: 11212 | Ean: 0817918023911 | UPC: 817918023911
The Large Thread-On Rubber Fitting Has A 1-1/2 Inch I.D. With A 1-13/16 Inch O.D. Which Works On Many Other Power Tools. The Rigid Plastic Vacuum Plug-In Adaptor Has A 2-1/4 Inch Taper Up To 2-5/16 Inch O.D. The Adaptor Is Designed To Plug Into Most Standard Workshop Vacuum Ports. The Plug-In Adaptor Conveniently Threads Onto The Power Tool Hose So It Will Never Slip Off!.
Included Inside The Box: 1 Each Ten Foot Long 1-3/16 Inch O.D. Small Diameter Flexible Hose, 2 Each Small Flexible Rubber Thread-On Fitting, 2 Each Rubber Adaptors With Ribbed Ends And 1 Each Plug-In Adaptor For Shop Vacuums That Will Allow You To Connect The Hose To Most Commercial Or Residential Workshop Vacuum Ports. Important! Check Your Power Tool Port Dimensions Before Placing An Order..
A Tapered Rubber Adaptor With A Ribbed End Is Included And Had A ¾” I.D. The Outer Diameter Tapers From 1-9/32” Down To 1-1/4”. The Ribbed End Ensures A Snug Fit. The Other Rubber Adapter With A Ribbed End Has A 1-1/4” I.D. And A 1-5/8” O.D. Both Fittings Are Threaded On The Opposite For A Perfect Fit On To The Included Hose.
The Small Rubber Fitting Threads On To The End Of The Hose And Is Ideal For Connecting Random Orbital Sanders, Palm Sanders, Biscuit Joiners Or Any Other Power Tool With Smaller Dust Collection Ports. The Small Thread-On Rubber Fitting Has A 1 Inch I.D. With A 1-3/16 Inch Taper Up To 1-1/4 Inch O.D. This Kit Will Also Work With Popular Tools Like The K4 And The K5 Pocket Hole Jig. Using This Hose With Your Tools Will Keep Your Shop Cleaner And Can Be Quickly Coiled Up For Easy Storage.
Features
- The smaller diameter 1-3/16" O.D. (Outside diameter) flexible dust collection power tool hose moves freely when connected to your power tools and vacuum. This gives you the ability to plug into different tools to add dust collection at a moments notice. The hose and its specialized fittings work with multiple power tools, workshop vacuums, jigs and other tools around your woodworking shop or work shop.
- The small rubber fitting threads on to the end of the hose and is ideal for connecting random orbital sanders, palm sanders, biscuit joiners or any other power tool with smaller dust collection ports. The small thread-on rubber fitting has a 1 inch I.D. with a 1-3/16 inch taper up to 1-1/4 inch O.D. This kit will also work with popular tools like the K4 and the K5 Pocket Hole Jig. Using this hose with your tools will keep your shop cleaner and can be quickly coiled up for easy storage
- The large thread-on rubber fitting has a 1-1/2 inch I.D. with a 1-13/16 inch O.D. which works on many other power tools. The rigid plastic vacuum Plug-in Adaptor has a 2-1/4 inch taper up to 2-5/16 inch O.D. The adaptor is designed to plug into most standard workshop vacuum ports. The Plug-in Adaptor conveniently threads onto the power tool hose so it will never slip off!
- A tapered rubber adaptor with a ribbed end is included and had a I.D. The outer diameter tapers from 1-9/32 down to 1-1/4 . The ribbed end ensures a snug fit. The other rubber adapter with a ribbed end has a 1-1/4 I.D. and a 1-5/8 O.D. Both fittings are threaded on the opposite for a perfect fit on to the included hose
- Included inside the box: 1 each ten foot long 1-3/16 inch O.D. small diameter flexible hose, 2 each small flexible rubber thread-on fitting, 2 each rubber adaptors with ribbed ends and 1 each Plug-in Adaptor for shop vacuums that will allow you to connect the hose to most commercial or residential workshop vacuum ports. IMPORTANT! CHECK YOUR POWER TOOL PORT DIMENSIONS before placing an order.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Fulton
Dimensions: 1.25 x 120.00 x 1.25 inches | Weight: 1.50 Pounds
See On Amazon #3
Fulton Woodworking Tools X-Stream Drill Press Dust Collector with Multi-Axis Adjustability Universal Mount
Asin: B0CZTVFYMK | Ean: 0817918024260 | UPC: 817918024260
From Bench Top Models To Floor Models, This System Is Compatible With Any Size Drill Press. The Included Extra Long Tube Can Be Cut To Size To Perfectly Fit Your Drill Press..
The X-Stream Drill Press Dust Collector Can Be Used With Most Any Material On Your Drill Press. Use This System To Collect Dust And Debris From Wood, Metal, Composites And More. Patent Pending..
With Two Different Nozzles (Tapered And Mini Dust Hood) You’Ll Not Only Be Able To Pin Point Your Dust Collection You’Ll Also Be Able To Sand On Your Drill Press Without Kicking Up So Much Dust. It’S Truly A Game Changer!.
With Multi-Axis Adjustability, You’Ll Have No Problem Collecting The Dust Right From The Source. Simply Adjust The X-Stream Drill Press Dust Collector To Your Exact Position And You’Re Ready To Keep Your Dust And Debris Under Control!.
Features
- This is the most advanced drill press dust collector yet! Keep your drill press work area clear of dust and debris by quickly and easily positioning the X-Stream Drill Press Dust Collector exactly where you need it! The X-Stream Drill Press Dust Collector provides you with an un-obstructed view of your drill point so you never lose site of where you are drilling.
- With Multi-Axis adjustability, you ll have no problem collecting the dust right from the source. Simply adjust the X-Stream Drill Press Dust Collector to your exact position and you re ready to keep your dust and debris under control!
- From bench top models to floor models, this system is compatible with any size drill press. The included extra long tube can be cut to size to perfectly fit your drill press.
- With two different nozzles (tapered and mini dust hood) you ll not only be able to pin point your dust collection you ll also be able to sand on your drill press without kicking up so much dust. It s truly a game changer!
- The X-Stream Drill Press Dust Collector can be used with most any material on your drill press. Use this system to collect dust and debris from wood, metal, composites and more. Patent Pending.
- See more on Amazon...
Brand: Fulton Woodworking Tools | Manufacturer: Fulton Woodworking Tools
See On Amazon #4
Fulton Long Handle J Roller with Thick Rubber Roller 1-1/2 in Diameter by 2-7/8 Wide For Veneers Laminate Wall Coverings and Edge Banding for Maximum Pressure Adhesion
Asin: B00409KRB4 | Model: 2212 | PartNumber: 2212 | Ean: 0810948015000 | UPC: 810948015000
A Full 12” Long, The J-Roller Is The Perfect Length To Handle Most Any Project Where You Need To Apply Sheet Goods To Another Surface. The Roller Is Made From A Firm, Non-Marring, Textured Rubber Material That Helps You Apply Pressure Where It Is Needed. The Roller Wall Is About 3/8” Thick So It Will Stand Up To The Rigorous Chore Of Applying Pressure To Your Sheet Goods..
Using The Fulton J-Roller Gives You The Ability To Evenly Apply Pressure To Your Veneer, Laminates And Wall Coverings To Provide Maximum Adhesion. Perfect For Working Many Of Those Project Types Around The House Or In Your Woodworking Shop. The Roller Measures Approximately 2-7/8” Wide..
The Heavy Duty Steel Handle Is Designed To Help You Exert As Much Pressure As Possible To The Work Surface. The Handle Is Wrapped With Two Separate Sections Of Comfortable Rubber Grips For Extended Use And Less Hand Fatigue. The Bottom Of The Handle Forms The “J” To Attach The Heavy Duty Rubber Roller Without Getting In The Way Of Your Rolling Process..
When Applying Veneer On Wood For Example, You Generally Need To Exert A Good Amount Of Even Downward Pressure On The Veneer Sheet Or Roll. To Do This, We Could Use A Flat Bar Of Some Sort, But That Generally Won’T Be Even Enough And Can’T Get Into The Slight Undulations Of The Wood Surface. The Fulton J-Roller Is The Perfect Width To Properly Work The Veneer For Proper Adhesion..
Features
- Applying veneer, laminate or even wall coverings usually requires some tools that you may not find in your neighborhood big box store or even at a local mom and pop hardware store. The Fulton J-Roller is one of those items and is the ideal tool for applying pressure to your sheet or paper goods to ensure proper adhesion to your work surface.
- When applying veneer on wood for example, you generally need to exert a good amount of even downward pressure on the veneer sheet or roll. To do this, we could use a flat bar of some sort, but that generally won t be even enough and can t get into the slight undulations of the wood surface. The Fulton J-Roller is the perfect width to properly work the veneer for proper adhesion.
- A full 12 long, the J-Roller is the perfect length to handle most any project where you need to apply sheet goods to another surface. The roller is made from a firm, non-marring, textured rubber material that helps you apply pressure where it is needed. The roller wall is about 3/8 thick so it will stand up to the rigorous chore of applying pressure to your sheet goods.
- The heavy duty steel handle is designed to help you exert as much pressure as possible to the work surface. The handle is wrapped with two separate sections of comfortable rubber grips for extended use and less hand fatigue. The bottom of the handle forms the J to attach the heavy duty rubber roller without getting in the way of your rolling process.
- Using the Fulton J-Roller gives you the ability to evenly apply pressure to your veneer, laminates and wall coverings to provide maximum adhesion. Perfect for working many of those project types around the house or in your woodworking shop. The roller measures approximately 2-7/8 wide.
- See more on Amazon...
Brand: Fulton | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon #5
Fulton Woodworking Tools 4" x 20' Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!
Asin: B0013ENKIQ | Model: 376 | PartNumber: 376 | Ean: 0810948014058 | UPC: 810948014058
This Heavy Duty Hose Will Not Collapse Under Pressure From Your Dust Collector..
Hose Is Clear So You Can See Directly Inside To Spot Any Kind Of Obstruction..
Tight Bending Radius Allows You To Maneuver The Hose Anywhere In Your Shop..
Features
- The PVC hose is wrapped around a steel wire that can easily be grounded.
- Tight bending radius allows you to maneuver the hose anywhere in your shop.
- This heavy duty hose will not collapse under pressure from your dust collector.
- Hose is clear so you can see directly inside to spot any kind of obstruction.
- See more on Amazon...
Brand: Fulton Woodworking Tools | Manufacturer: Peachtree Woodworking Supply Inc
Dimensions: 5.00 x 18.00 x 18.00 Inches
See On Amazon #6
2 1/2" x 20' Clear PVC Dust Collection Hose For Use with Dust Collectors with 2-1/2" Ports. Ideal for Shop Vacuums
Asin: B01L0FZOQ8 | Model: 368 | PartNumber: 368 | Ean: 0810948014027 | UPC: 810948014027
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
While Pvc Hose Can Be Used On Other Machinery Or Devices It Has Been Designed For Dust Collection Purposes. The Hose Temperature Range Is -20° F To 165° F Which Is Ideal For Indoor Use Like In A Woodworking Or Workshop Environment. The Clear Hose Wraps Around A Black Carbon Steel Wire Helix That Reinforces The Hose To Keep It From Kinking And Is Capable Of An Electrostatic Discharge When Properly Grounded At Both Ends Of The Hose..
This Pvc Hose Is Clear Which Allows You To See What’S Going On Inside The Hose While The Dust And Debris Are Flowing Through It. Not Only Can You See The Dust And Debris, You Can Also See If Any Build Up Or Blockage Has Occurred. Being Able To See This Makes Fixing Any Suction Issues With The Hose Much Easier Than Typical Opaque Hoses..
Typically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
- See more on Amazon...
Brand: Fulton | Manufacturer: Peachtree Woodworking Supply Inc
Dimensions: 6.00 x 14.00 x 14.00 Inches | Weight: 5.00 Pounds
See On Amazon #7
Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop
Asin: B087XWCV61 | Model: 11567 | PartNumber: 11567 | Ean: 0817918022532 | UPC: 817918022532
The Head Is Mounted To A Solid Steel Miter Bar That Measure 18” In Length And Is .354” Thick By .730” Wide. Standard Miter Slots Are 3/4” X 3/8” With A 1/8” “T” Slot (Slight Variances From Brand To Brand) Running The Length On The Bottom Of The Slot. The Steel Miter Bar Is Equipped With A Metal, Removable Retaining Disc That Measures 7/8” In Diameter And Is Just Shy Of 1/8” To Fit Into To The “T” Slot To Prevent Accidental Lifting When Feeding Your Stock Through..
Both Ends Of The Fence Are Cut At Exactly 45 Degrees. This Allows You To Position The Fence Extra Close To The Saw Blade (With The Power Turned Off) So You Have Even More Control Over The Workpiece You Are Cutting. The Fence Comes With A Flip Stop That Makes Repetitive Cuts A Breeze. When Not In Use The Flip Stop Can Be Flipped Up And Out Of The Way. Also Include Are Two Sticky Back Measuring Tapes. 1 Tape Is Left To Right Reading And The Other Is Right To Left Reading..
Made From A Single Piece Of Extruded Aluminum, This Precision Miter Gauge Fence Is Not Only Durable, Its Accurate And Saves Setup Time. The Fence Is Designed To Be Used With Most Any Miter Gauge With Its Off-Set Mounting Track On The Back Of The Fence. The Off-Set Track Allows You To Flip The Fence For Lower Profile Miter Gauge Mounts And Flip Back For Standard Height Miter Gauges. The Fence Can Be Mounted To Older Miter Gauges By Adding A Wooden Block Mount With Wooden Screws If Necessary..
The .200” Thick, Adjustable, Solid Aluminum Head Is Machined With 13 Positive Stop Holes. 1 Hole Is At 90 Degrees While The 6 Holes On Both Sides Are At 22.5, 30, 45, 60, 67.5 And 90 Degrees. The Positive Stops Are Perfect For Many Woodworking Projects As They Are The Angles That Are Typically Used.To Adjust The Head You Simply Loosen The Post Knob Handle, Pull The Spring Loaded Indexing Pin Outward, Rotate The Head To The Desired Position, Release The Pin And Lock Into Place..
Features
- The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
- The .200 thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
- The head is mounted to a solid steel miter bar that measure 18 in length and is .354 thick by .730 wide. Standard miter slots are 3/4 x 3/8 with a 1/8 T slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8 in diameter and is just shy of 1/8 to fit into to the T slot to prevent accidental lifting when feeding your stock through.
- Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
- Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools Inc.
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 2.50 Pounds
See On Amazon #8
Peachtree Woodworking Supply Extendable Heavy Duty Floor and Wall Roller for Laminate, LVP, Veneer, Linoleum, Carpet, Tile and Wall Coverings 7-1/2 Wide with a 17 inch Handle That Extends to 27 inches
Asin: B07SGRJ1H8 | Model: FBA-2214 | PartNumber: FBA-2214 | Ean: 0817918022204 | UPC: 817918022204
The Extendable Handle Has A Black, Rubber Handle Bar Style Grip For Comfort. With A Simple Counter Clockwise Twist, The Secondary Handle Can Be Extended To A Full 27” Long! Talk About Leverage! This Makes It Perfect For Many Different Types Of Applications. Once You Loosen The Handle, Simply Pull It Out Too Length Up To 27” And Then Simply Twist The Handle Back Clockwise To Lock It In. Now You Will Be Able To Apply Pressure To Most Any Project Large Or Small..
Each Of The Segmented Rollers Are Made Of A Solid Non Marring Rubber Material So Your Work Surface Is Safe From Being Marked Or Damaged When Using It. Each Roller Is Approx. 1-1/2” In Diameter And 2-7/32” Long For A Total Of 7-1/2” Wide Rolling Surface..
We Designed The 3 Rollers To Be Set In A Segmented Fashion So The Pressure Action Of The Rollers Will Be Evenly And Directly Distributed Behind Each Roller Producing Excellent Results When Pressure Is Applied. Some Press Rollers Use A Single Roller Type Of Tool Which Tends To Produce Inconsistent And Uneven Results..
The Heavy Duty Cast Leverage Handle Allows You Lean Into To Apply As Much Pressure As Needed And Will Take Virtually All Of Your Weight Behind It. This Helps You Press And Roll Out Your Material As Efficiently And As Quickly As Possible. Perfect For Flooring Projects.
Features
- The Extendable Heavy Duty Segmented Roller provides excellent leverage while applying pressure to linoleum, carpets, tile, wall coverings, laminates, large veneer projects and more! Projects that were once difficult are now a cinch with this rugged tool with its ergonomic, heavy duty leverage handle and rubber rollers.
- The heavy duty cast leverage handle allows you lean into to apply as much pressure as needed and will take virtually all of your weight behind it. This helps you press and roll out your material as efficiently and as quickly as possible. Perfect for flooring projects
- The extendable handle has a black, rubber handle bar style grip for comfort. With a simple counter clockwise twist, the secondary handle can be extended to a full 27 long! Talk about leverage! This makes it perfect for many different types of applications. Once you loosen the handle, simply pull it out too length up to 27 and then simply twist the handle back clockwise to lock it in. Now you will be able to apply pressure to most any project large or small.
- We designed the 3 rollers to be set in a segmented fashion so the pressure action of the rollers will be evenly and directly distributed behind each roller producing excellent results when pressure is applied. Some press rollers use a single roller type of tool which tends to produce inconsistent and uneven results.
- Each of the segmented rollers are made of a solid non marring rubber material so your work surface is safe from being marked or damaged when using it. Each roller is approx. 1-1/2 in diameter and 2-7/32 long for a total of 7-1/2 wide rolling surface.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Fulton
See On Amazon #9
Fulton 6 inch Long Forstner Bit Extension for Adding Over 5-5/8 inches of Drilling Depth to Your Forstner Bit. for Wood Turners, Furniture, Carpentry and Construction
Asin: B003UO7Y98 | Model: 927 | PartNumber: 927 | Ean: 0810948014492 | UPC: 810948014492
One Of The Most Common Uses For The Forstner Bit Extension Is For Woodturners Who Need To Bore Out Starter Holes On Larger Vessels. However, The Extension Works Exceptionally Well For Projects Like Salt Shakers, Pepper Mills Or Even Wood Turned Beverage Mugs. Contractors Use The Extension When They Need To Bore Deep Holes For Running Cables Or Wires And They Also Use It For Joining Larger Timbers..
The Collet Outside Diameter Is 25/32 Inch Without The Set Screws Protruding Outward. The Reason This Is Important Is That As We Mentioned Earlier, Some Bits May Have Slightly Different Shank Sizes. This Means The Set Screws May Protrude Outwardly From The Collet. The Minimum Size Hole This Extension Will Allow You To Drill Is 13/16 Inch. Forstner Bits And Machinery Shown In Pictures Are Not Included..
The Forstner Bit Extender Is Made From Solid, Heavy Duty Machined Steel. It Is Designed To Be Used With Forstner Bits Only. The Collet Inside Diameter Is 3/8 Inch. This Tolerance Is Very Tight And Designed To Accept Forstner Bits With Shank Sizes Of 3/8 Inch Or Slightly Smaller. Please Note That Some Forstner Bit Manufacturers Produce Bits That Say 3/8 Inch Shank Size When In Fact They Are Not. If You Measure Your Bit Shank And It Is 3/8 Inch, Your Bit Should Fit Once The Set Screws Are Loosened.
The Forstner Bit Extension Gives You Additional 5-5/8 Inches Of Reach To Bore Deeper Into Your Projects. This Will Help You Create Larger Diameter Starter Holes Or Help When You Need To Drill In Just A Little Further Than The Standard Bit Length Will Allow. The Extension Can Be Used With Forstner Bits On Drill Presses, Lathes With A Drill Chuck Installed (Drill Chuck Not Included) Or With A Power Drill..
Features
- Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed a heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
- The forstner bit extension gives you additional 5-5/8 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
- One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
- The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
- The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
See On Amazon #10
Fulton Woodworking Tools 4" x 50' Ultra Flex Clear Vue Heavy Duty PVC Dust Collection Hose
Asin: B0013EI04A | Model: 377 | PartNumber: 377 | Ean: 0810948014065, 0798167706759 | UPC: 810948014065, 798167706759
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
While Pvc Hose Can Be Used On Other Machinery Or Devices It Has Been Designed For Dust Collection Purposes. The Hose Temperature Range Is -20° F To 165° F Which Is Ideal For Indoor Use Like In A Woodworking Or Workshop Environment. The Clear Hose Wraps Around A Black Carbon Steel Wire Helix That Reinforces The Hose To Keep It From Kinking And Is Capable Of An Electrostatic Discharge When Properly Grounded At Both Ends Of The Hose..
This Pvc Hose Is Clear Which Allows You To See What’S Going On Inside The Hose While The Dust And Debris Are Flowing Through It. Not Only Can You See The Dust And Debris, You Can Also See If Any Build Up Or Blockage Has Occurred. Being Able To See This Makes Fixing Any Suction Issues With The Hose Much Easier Than Typical Opaque Hoses..
Typically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
- See more on Amazon...
Brand: Fulton Woodworking Tools | Manufacturer: Peachtree Woodworking Supply Inc
Dimensions: 10.00 x 24.00 x 20.00 Inches
See On Amazon #11
4 inch diameter x 10 foot long Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!
Asin: B01M3Y1WTT | Model: 6168 | PartNumber: 6168 | Ean: 0817918020460 | UPC: 817918020460
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
While Pvc Hose Can Be Used On Other Machinery Or Devices It Has Been Designed For Dust Collection Purposes. The Hose Temperature Range Is -20° F To 165° F Which Is Ideal For Indoor Use Like In A Woodworking Or Workshop Environment. The Clear Hose Wraps Around A Black Carbon Steel Wire Helix That Reinforces The Hose To Keep It From Kinking And Is Capable Of An Electrostatic Discharge When Properly Grounded At Both Ends Of The Hose..
This Pvc Hose Is Clear Which Allows You To See What’S Going On Inside The Hose While The Dust And Debris Are Flowing Through It. Not Only Can You See The Dust And Debris, You Can Also See If Any Build Up Or Blockage Has Occurred. Being Able To See This Makes Fixing Any Suction Issues With The Hose Much Easier Than Typical Opaque Hoses..
Typically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton
Dimensions: 4.00 x 120.00 x 4.00 Inches
See On Amazon #12
5" x 10' (5 inch diameter by 10 feet long) Ultra-Flex Clear Vue Heavy Duty PVC Dust, Debris and Fume Collection Hose - MADE IN USA!
Asin: B07VYNDXTV | Model: 6171 | PartNumber: 6171 | Ean: 0817918022310 | UPC: 817918022310
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
While Pvc Hose Can Be Used On Other Machinery Or Devices It Has Been Designed For Dust Collection Purposes. The Hose Temperature Range Is -20° F To 165° F Which Is Ideal For Indoor Use Like In A Woodworking Or Workshop Environment. The Clear Hose Wraps Around A Black Carbon Steel Wire Helix That Reinforces The Hose To Keep It From Kinking And Is Capable Of An Electrostatic Discharge When Properly Grounded At Both Ends Of The Hose..
This Pvc Hose Is Clear Which Allows You To See What’S Going On Inside The Hose While The Dust And Debris Are Flowing Through It. Not Only Can You See The Dust And Debris, You Can Also See If Any Build Up Or Blockage Has Occurred. Being Able To See This Makes Fixing Any Suction Issues With The Hose Much Easier Than Typical Opaque Hoses..
Typically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
Dimensions: 0.04 x 120.00 x 5.00 Inches
See On Amazon #13
Fulton 2 1/2 Inch Thumb Screw Key Adjustable 304 Stainless Steel Hose Clamps, Pipe Clamp, Worm Gear Clamps, Dryer Vent Clamp, Dust Collection, Automotive, RV Clamp 5 pack (2 1/2" Hose Clamps)
Asin: B07PFPWGHD | Ean: 0817918022075 | UPC: 817918022075
Large Easy To Turn Key - The Easy To Turn And Easy To See Blue Key Is Made From A Strong And Durable Polymer. The Key Is Designed To Make The Securing And Un-Securing Of Hose Much Easier On The Knuckles. No More Knuckle Busting Flat Head Screw Drivers Or Tiny Socket Wrenches. Simply To Turn The Key Clockwise To Tighten, Counter Clockwise To Loosen..
Flexible Adjustable Size Range- 2 1/2 Inch Hose Clamps Are Flexible And Workable With A Rather Wide Adjustable Size Range From Appx. 2-7/8” (2.877” Or 73.08Mm) In Full Diameter Down To Appx. 1-7/8” (1.874” Or 47.61Mm) At Its Most Compact Diameter..
Flexible Adjustable Size Range- 2 1/2 Inch Hose Clamps Are Flexible And Workable With A Rather Wide Adjustable Size Range From Appx. 2-7/8” (2.877” Or 73.08Mm) In Full Diameter Down To Appx. 1-7/8” (1.874” Or 47.61Mm) At Its Most Compact Diameter..
304 Stainless Steel Hose Clamp- The 2 ½” Diameter Large Hose Duct Clamp (Including The Housing, The Band And The Internal Screw Are Made From Premium 304 Stainless Steel. This Makes The Clamp Strong, Durable And Rust Resistant Which Makes It Ideal For Many Applications In The Shop Or Around The Home..
Features
- NO MORE TOOLS! Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them.
- 304 STAINLESS STEEL HOSE CLAMP- The 2 diameter large hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home.
- LARGE EASY TO TURN KEY - The easy to turn and easy to see blue key is made from a strong and durable polymer. The key is designed to make the securing and un-securing of hose much easier on the knuckles. No more knuckle busting flat head screw drivers or tiny socket wrenches. Simply to turn the key clockwise to tighten, counter clockwise to loosen.
- FLEXIBLE ADJUSTABLE SIZE RANGE- 2 1/2 inch hose clamps are flexible and workable with a rather wide adjustable size range from appx. 2-7/8 (2.877 or 73.08mm) in full diameter down to appx. 1-7/8 (1.874 or 47.61mm) at its most compact diameter.
- FLEXIBLE ADJUSTABLE SIZE RANGE- 2 1/2 inch hose clamps are flexible and workable with a rather wide adjustable size range from appx. 2-7/8 (2.877 or 73.08mm) in full diameter down to appx. 1-7/8 (1.874 or 47.61mm) at its most compact diameter.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
See On Amazon #14
Fulton DIY Table Saw Crosscut Sled Kit with 2 UHMW Miter Bars 2 Aluminum Tracks 1 Knob and 1 Bolt along with Full Color HOW TO BUILD YOUR OWN Crosscut Sled Guide Booklet
Asin: B08G4ZBCSR | Model: 11577 | PartNumber: 11577 | Ean: 0817918022815 | UPC: 817918022815
Uhmw Bars Are Most Commonly Used As Runners For Crosscut Sleds Since They Don’T Produce As Much Friction As Wood Does. Another Advantage Is That Uhmw Won’T Expand Or Contract Like Wood Does During Drastic Weather Changes. Each Bar Is Approximately 3/4” X 3/8” Which Fits Most Standard Table Saw Slots. Uhmw Bars Are Also Slick And Won’T Leave Any Residue, Dust Or Shavings Behind Like Wooden Bars Tend To Do..
We Have Also Included A Full Color And Detailed How To Guide Book To Help You With The Crosscut Sled Building Process. Each Kit Comes With 2 Each 19” Long By 3/4” By 3/8” Uhmw Bars, 2 Each 12” Long Mini Tracks, 1 Each Knob, 1 Each 1/4” By 20 Tpi Bolt And A How To Build Your Own Crosscut Sled Guide Book. Make Your Crosscut Sled To The Size You Want Or Need For Your Table Saw And Your Specific Cutting Needs. Please Note, The Bars Do Not Fit Ryobi Table Saw Track Slots..
The Tracks That Are Included In This Kit Are Made From Solid Extruded Aluminum And Are Made In The Usa. Each Track Is Cut To Length For The Perfect Sub-Fence On The Crosscut Sled. The Included Knob And Bolt Is For Making A Simple Stop Block Which When Finished, Can Slide The Length Of Either Track Along The Sub-Fence. The Stop Block Will Allow You To Make Repetitive Cuts Without Having To Constantly Move And Measure The Fence Distance Each Time You Make A Cut..
Some Time Ago We Noticed A Lot Of Companies Had Uhmw Bars Available For Purchase. While We As A Woodworking Company Know Exactly What They Are Used For, Many Novice Or Non-Woodworkers Do Not. That’S When We Decided To Create This Package With Pre-Cut Uhmw Bars, Pre-Cut Aluminum Track, A Knob And Bolt And An Easy To Understand How To Guide Booklet So You Can Create Your Very Own, Custom Crosscut Sled To Fit Your Table Saw!.
Features
- If you own a table saw, you probably have come across a situation or two where you need to make smaller cuts or make cross cuts. You may also have had the need to make repetitive cuts of the same length. Making small cuts, cross cuts and repetitive length cuts is where table saw crosscut sleds excel. Crosscut sleds help stabilize the work piece and are very accurate since they are essentially calibrated to your saw during the sled building process.
- Some time ago we noticed a lot of companies had UHMW bars available for purchase. While we as a woodworking company know exactly what they are used for, many novice or non-woodworkers do not. That s when we decided to create this package with pre-cut UHMW bars, pre-cut aluminum track, a knob and bolt and an easy to understand how to guide booklet so you can create your very own, custom crosscut sled to fit your table saw!
- UHMW bars are most commonly used as runners for crosscut sleds since they don t produce as much friction as wood does. Another advantage is that UHMW won t expand or contract like wood does during drastic weather changes. Each bar is approximately 3/4 x 3/8 which fits most standard table saw slots. UHMW bars are also slick and won t leave any residue, dust or shavings behind like wooden bars tend to do.
- The tracks that are included in this kit are made from solid extruded aluminum and are Made in the USA. Each track is cut to length for the perfect sub-fence on the crosscut sled. The included knob and bolt is for making a simple stop block which when finished, can slide the length of either track along the sub-fence. The stop block will allow you to make repetitive cuts without having to constantly move and measure the fence distance each time you make a cut.
- We have also included a full color and detailed how to guide book to help you with the crosscut sled building process. Each kit comes with 2 each 19 long by 3/4 by 3/8 UHMW bars, 2 each 12 long mini tracks, 1 each knob, 1 each 1/4 by 20 tpi bolt and a how to build your own crosscut sled guide book. Make your crosscut sled to the size you want or need for your table saw and your specific cutting needs. Please Note, the bars do NOT FIT RYOBI table saw track slots.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
Weight: 0.84 pounds
See On Amazon #15
FULTON Corporation 400SHB Steel Sawhorse Bracket, 2 Pack (Total 4 Count)
Asin: B07XLD1KY9
Feature Pre-Drilled Nail Holes For Easy Assembly..
2 Pack. Total 4 Count.
4 Flanged Nail Holes On Top..
Features
- All steel riveted sawhorse bracket
- 4 flanged nail holes on top.
- Feature pre-drilled nail holes for easy assembly.
- 2 Pack. Total 4 count
- See more on Amazon...
Brand: Fulton
See On Amazon #16
Sili-Brush - Silicone Glue Brush (1" Tip) Glue Dries and Peels Off. Ideal for Wodworking, Arts, Crafts, Around The Home and Hobbyists. Tips Made from Silicone Rubber.
Asin: B009OCEBD2 | Model: 1203 | PartNumber: 1203 | Ean: 7131405093045, 0814310014820 | UPC: 814310014820
Once You Finish Applying Glue, Simply Rinse The Brush Head Off With Warm Soap And Water And You Are Ready To Re-Use The Sili Brush Again After It Dries. Another Way To Clean The Sili Brush Is To Let The Glue Dry Over Night On The Brush Tip And Then Peel The Glue Right Off Without Damaging The Brush. It’S Perfect For When We Are In A Rush Or Simply Just Forget To Clean The Brush. No More Throwing Away Brushes And No More Buying Huge Multipacks..
This Revolutionary Brush Makes Glue Up Project Fun And Enjoyable Without The Mess. Use The Sili Brush Over And Over Again Without Having To Purchase New Brushes. The Sili Brush Tip Is Made From Silicone Rubber For Easy Clean Up. The Tip Is Also Angled Just Right For Optimal Glue Application Regardless Of The Project..
The Handle Features A Comfortable Grip Shape For Extended Periods Of Use And It Also Features A Flat Paddle End With A Built In Rest. The Paddle Is Perfect For Applying Small Amounts Of Glue To Smaller Areas Like Wood Dovetail Or Box Joints. The Rest On The Paddle End Allows The Brush To Be Set Down Without Touching Your Table Top Surface..
Introducing The The Sili Brush! This Silicone Glue Brush Allows You To Apply Yellow Wood Or White School Glue Quickly And Easily With The Sili Brush Non-Stick Glue Brush. The Sili Brush Is Designed To Be Used Over And Over Again Without Having To Purchase Extra Brushes Like You Would With Typical Tin Acid Or Flux Applicator Brushes. The Silicone Bristles Make Applying Glue And Cleanup Of The Brush A Breeze..
Features
- We ve all used those pesky and irritating horse hair acid glue brushes to apply white school glue or yellow wood glue only to find out the bristles don t hold very well and the glue coverage is minimal. Not only that, we tend to keep buying more and more and more of these brushes just to use them once and throw them away.
- Introducing the the Sili Brush! This silicone glue brush allows you to apply yellow wood or white school glue quickly and easily with the SILI Brush non-stick glue brush. The SILI Brush is designed to be used over and over again without having to purchase extra brushes like you would with typical tin acid or flux applicator brushes. The silicone bristles make applying glue and cleanup of the brush a breeze.
- Once you finish applying glue, simply rinse the brush head off with warm soap and water and you are ready to re-use the SILI Brush again after it dries. Another way to clean the Sili brush is to let the glue dry over night on the brush tip and then peel the glue right off without damaging the brush. It s perfect for when we are in a rush or simply just forget to clean the brush. No more throwing away brushes and no more buying huge multipacks.
- The handle features a comfortable grip shape for extended periods of use and it also features a flat paddle end with a built in rest. The paddle is perfect for applying small amounts of glue to smaller areas like wood dovetail or box joints. The rest on the paddle end allows the brush to be set down without touching your table top surface.
- This revolutionary brush makes glue up project fun and enjoyable without the mess. Use the Sili brush over and over again without having to purchase new brushes. The Sili brush tip is made from silicone rubber for easy clean up. The tip is also angled just right for optimal glue application regardless of the project.
- See more on Amazon...
Brand: Sili | Manufacturer: Fulton Tools
Weight: 0.01 pounds
See On Amazon #17
6" x 10' (6 inch diameter by 10 feet long) Ultra-Flex Clear Vue Heavy Duty PVC Dust, Debris and Fume Collection Hose - MADE IN USA!
Asin: B07WWXYYXW | Model: 0311-0600-0100 | PartNumber: 0311-0600-0100 | Ean: 0817918022358 | UPC: 817918022358
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
While Pvc Hose Can Be Used On Other Machinery Or Devices It Has Been Designed For Dust Collection Purposes. The Hose Temperature Range Is -20° F To 165° F Which Is Ideal For Indoor Use Like In A Woodworking Or Workshop Environment. The Clear Hose Wraps Around A Black Carbon Steel Wire Helix That Reinforces The Hose To Keep It From Kinking And Is Capable Of An Electrostatic Discharge When Properly Grounded At Both Ends Of The Hose..
This Pvc Hose Is Clear Which Allows You To See What’S Going On Inside The Hose While The Dust And Debris Are Flowing Through It. Not Only Can You See The Dust And Debris, You Can Also See If Any Build Up Or Blockage Has Occurred. Being Able To See This Makes Fixing Any Suction Issues With The Hose Much Easier Than Typical Opaque Hoses..
Typically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
Dimensions: 0.04 x 120.00 x 6.00 Inches
See On Amazon #18
Fulton HDPB330101 Fold-Away Bolt-On Hinge Kit for 3" x 3" Trailer Beam - 5,000 lb. Weight Capacity
Asin: B001F0IE7A | Model: HDPB330101 | PartNumber: HDPB330101 | Ean: 0080023428258, 0783192015723, 6521515367975, 0066511732106, 0013523666516 | UPC: 013523666516, 066511732106, 080023428258, 783192015723
Trailer Tongues To Be 3 Inch X 3 Inch Outside Dimensions With A Material Thickness Between .188 Inch And .120 Inch.
Easy To Install Bolt-On Application With Complete Instruction Manual And Includes All Mounting Hardware.
Mount Fold-Away Products To Trailer Tongues Made Only Of Steel.
Delivers Strength At The Pivot Point With Precisely Machined Heavy Duty Hinges Made From Die Cast Steel.
Features
- Converts standard trailer tongues into fold-away configures while preserving the existing coupler
- Delivers strength at the pivot point with precisely machined heavy duty hinges made from die cast steel
- Trailer tongues to be 3 inch x 3 inch outside dimensions with a material thickness between .188 inch and .120 inch
- Mount Fold-Away products to trailer tongues made only of steel
- Easy to install bolt-on application with complete instruction manual and includes all mounting hardware
- See more on Amazon...
First Available: 06/16/2014
Brand: Fulton | Manufacturer: Fulton
Dimensions: 7.10 x 8.90 x 5.00 Inches | Weight: 11.00 Pounds
Warranty: 5 Year
See On Amazon #19
Fulton 11 Piece 21 Profile Contour and Angle Sanding Grip Pack with 50 Assorted Pre-Cut Abrasive Sheets for Sanding Inside or Outside Angles Beads Corners Flutes Molding Models Marine Wood and More
Asin: B0BS1QST7Y | Model: 11582 | PartNumber: 11582 | Ean: 0817918023249 | UPC: 817918023249
The Contour Sanding Grip Pads Are Double-Ended To Make It Super Easy To Sand Convex Or Concave Surfaces. Each Pad Has A Convex Profile At One And A Concave Profile At The Other Along With A Narrow Flexible Section In The Middle That Can Be Used For Sanding.
This 11Pc Set Comes With The Following: 2.6Mm Thick Flexible Pad, 1/8” And ¼” Radius Round Over Grip, 90 Degree Grip, 60 And 75 Degree Grip, 30 And 45 Degree Grip And 1 Each Contour Grips With The Following Inside/Outside Diameters: 1/4'', 3/8'', 1/2'', 5/8'', 3/4'' And 7/8''. Also Included Are 50 Sheets (10 Of Each Grit) Of Pre-Cut Abrasive Sandpaper In The Following Grits: 80, 100, 120, 150 And 220.
Our Angled Contour Grip Sanding Pads Change The Angle Sanding Game By Providing You The Ability To Sand Inside Angles Without Flattening Or Smoothing The Crispness Of Your Original Profile. Not Only Does This Set Contain Inside Angle Profile Pads, There Are 1/8” And ¼” Round Overs, Various Non Specific Round Over Profile And Of Course The Flat Sanding Grip To Sand General Shapes And Objects..
These 11 Grips With 21 Different Profiles Will Tackle Most Any Sanding Project You May Come Across. Designed To Work With Standard 9” X 11” Sanding Sheets Or Pre-Cut Sandpaper Sheets (Included). This Set Is A Set Of Sanding Pads That No One Should Be Without..
Features
- Finally! A set of contours, angles and pads that work for inside, outside, flat, curved, small and tight areas all in one convenient package! The non-slip rubber pad prevents abrasive slippage and hand fatigue. This set is perfect for woodworkers, auto body, metal work, arts, crafts or even around the house.
- These 11 grips with 21 different profiles will tackle most any sanding project you may come across. Designed to work with standard 9 x 11 sanding sheets or pre-cut sandpaper sheets (included). This set is a set of sanding pads that no one should be without.
- The Contour Sanding Grip pads are double-ended to make it super easy to sand convex or concave surfaces. Each pad has a convex profile at one and a concave profile at the other along with a narrow flexible section in the middle that can be used for sanding
- Our Angled Contour Grip sanding pads change the angle sanding game by providing you the ability to sand inside angles without flattening or smoothing the crispness of your original profile. Not only does this set contain inside angle profile pads, there are 1/8 and round overs, various non specific round over profile and of course the flat sanding grip to sand general shapes and objects.
- This 11pc set comes with the following: 2.6mm thick flexible pad, 1/8 and radius round over grip, 90 degree grip, 60 and 75 degree grip, 30 and 45 degree grip and 1 each contour grips with the following inside/outside diameters: 1/4'', 3/8'', 1/2'', 5/8'', 3/4'' and 7/8''. Also included are 50 sheets (10 of each grit) of pre-cut abrasive sandpaper in the following grits: 80, 100, 120, 150 and 220
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton
See On Amazon #20
Fulton 4 inch to 2 1/2 inch Reducer Fitting for Dust Collection Hose to Hose Connections and 4 Inch Port Connections on Larger Machinery
Asin: B08HR6MDWT | Model: 441 | PartNumber: 441 | Ean: 0817918022839 | UPC: 817918022839
This Cone Shaped Reducer Can Be Also Be Used On Machinery With A Little Help From Some Other Accessories. Typically The Reducer Works With Hose Since It Is Basically The Same Size As Your 4 Inch And 2 1/2 Inch Machinery Or Shop Wet/Dry Vac Ports. With A 4 Inch Diameter Rubber Coupler (Sold Separately) Or A Short Section Of 4 Inch Hose You Can Connect The Reducer Directly To A 4 Inch Port On Machines Like Band Saws, Table Saws, Large Planers And More..
Made From High Quality Abs Plastic For Extended Periods Of Use, This Fitting Will Withstand The Constant Friction And Debris Flow Of Woodworking Dust Collectors. The Reducer Measures: Nominal 4 Inch End Is 3-61/64” Od And 3-41/64” Id; 2-1/2” Nominal Od End Measures 2-15/32” Od And 2-9/32” Id. All Of The Dimensions May Slightly Vary Due To Slight Variations In The Manufacturing Process..
Most Wet/Dry Vacuum Hoses Will Plug Directly Into The Smaller End Of This Fitting Making It A Super Value For Most Of Us Weekend Warrior Type Woodworkers. There Are Some Vacuum Units That Use Different Size Hoses And Hose Adaptors So Please Be Sure To Measure Your Hose And Machine Ports Before Making A Purchasing Decision..
One Of The Reasons That This Fitting Is Used So Often Within The Woodworking Industry, Is That Many Of Us Don’T Want Or Need A Large Dust Collection System In Our Garage Or Workshop. With This Fitting, You’Ll Be Able To Reduce Your Hose Size Down To The 2 1/2 Inch Size Which The Most Commonly Used Size For Most Big Box Store Wet/Dry Vacuums And Shop Vacuums..
Features
- The Fulton 4 Inch to 2 1/2 inch reducer has been designed with a specific purpose in mind. That purpose is to connect the industry standard 4 inch diameter dust collection hose with the other industry standard 2 1/2 inch diameter dust collection hose. With a couple of hose clamps (not included) this reducer does its job perfectly and more!
- One of the reasons that this fitting is used so often within the woodworking industry, is that many of us don t want or need a large dust collection system in our garage or workshop. With this fitting, you ll be able to reduce your hose size down to the 2 1/2 inch size which the most commonly used size for most big box store wet/dry vacuums and shop vacuums.
- This cone shaped reducer can be also be used on machinery with a little help from some other accessories. Typically the reducer works with hose since it is basically the same size as your 4 inch and 2 1/2 inch machinery or shop wet/dry vac ports. With a 4 inch diameter rubber coupler (sold separately) or a short section of 4 inch hose you can connect the reducer directly to a 4 inch port on machines like band saws, table saws, large planers and more.
- Most wet/dry vacuum hoses will plug directly into the smaller end of this fitting making it a super value for most of us weekend warrior type woodworkers. There are some vacuum units that use different size hoses and hose adaptors so please be sure to measure your hose and machine ports before making a purchasing decision.
- Made from high quality ABS plastic for extended periods of use, this fitting will withstand the constant friction and debris flow of woodworking dust collectors. The reducer measures: Nominal 4 inch end is 3-61/64 OD and 3-41/64 ID; 2-1/2 nominal OD end measures 2-15/32 OD and 2-9/32 ID. All of the dimensions may slightly vary due to slight variations in the manufacturing process.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
See On Amazon #21
Safety Woodworking Push Stick 2 Pack, Each Has a Contoured Handle Embedded with Two Rare Earth Magnets, Ideal for Pushing Stock Through on Table Saws, Router Tables, Shapers and Jointers
Asin: B07QHZQ7FR | Model: 11552 | PartNumber: 11552 | Ean: 0817918022167 | UPC: 817918022167
One Of The “Handiest” Features Of This Push Stick Is That We Have Embedded Two Magnets Into The Handle. We Have Done This Because Many Of Us Have A Hard Time Keeping Track Of Our Tools Once We Are Done With Them. The Embedded Magnets Remedy This Issue By Allowing You To Place The Push Stick Directly On Metal Surfaces Like The Side Of A Table Saw Cabinet. We Have Embedded Not Just One, But Two Separate Magnets On To The Handle To Keep The Push Stick From Sliding Or Inadvertently Rotating..
The Magnetic Handle Push Stick Measures Approximately 12” Long And Has An Ergonomically Designed Handle That Delivers More Precise Control And A Comfortable Grip. The Push Stick Also Has A Hole Drilled Into The Handle Just In Case You Don’T Have Any Metal Surfaces To Place The Push Stick. The Hole Allows You To Hang The Push Stick Just A Like The Rest Of Your Tools . Includes 2 Safety Push Sticks..
The Push Stick End Has Been Intentionally Colored A Bright “Safety Orange” For The Simple Reason Of Being Able To See The Stick At All Times When In Use. This Ensures That You Can See Exactly Where You Are Placing The Push Stick In Relation To The Blade Or Cutter. The Bright Color Also Makes The Push Stick Easy To Locate When It Stored Away..
Designed To Keep Your Hands Away From Blades Or Cutter, This Push Stick Is An Essential Tool For Your Safety. The Push Stick Prevents Your Hand From Getting To Close To The Cutters Or Blades On Table Saws, Router Tables, Shapers And Jointers. The Push Stick Has A 90 Degree Notch On The End With A Relief Circle To Accept The 90 Degree Corner Of Your Stock. The Notched End Is Designed To Be At The Ideal Angle To The Handle And Allows For Even Pressure While Pushing Stock Through The Blade..
Features
- When you need to cut a narrow piece of stock on a table saw we know that it can be a little dicey or intimidating. Many of us try to cut the piece we need on the outside of the blade rather than dealing with narrow cuts. However, cutting narrow stock is sometimes unavoidable. In this case it is recommended that you use a safety device such as a push stick to help feed the stock through. Push sticks also help you safely push a workpiece, keeping it flat against a table top while it is being cut.
- Designed to keep your hands away from blades or cutter, this push stick is an essential tool for your safety. The push stick prevents your hand from getting to close to the cutters or blades on table saws, router tables, shapers and jointers. The push stick has a 90 degree notch on the end with a relief circle to accept the 90 degree corner of your stock. The notched end is designed to be at the ideal angle to the handle and allows for even pressure while pushing stock through the blade.
- One of the handiest features of this push stick is that we have embedded two magnets into the handle. We have done this because many of us have a hard time keeping track of our tools once we are done with them. The embedded magnets remedy this issue by allowing you to place the push stick directly on metal surfaces like the side of a table saw cabinet. We have embedded not just one, but two separate magnets on to the handle to keep the push stick from sliding or inadvertently rotating.
- The push stick end has been intentionally colored a bright safety orange for the simple reason of being able to see the stick at all times when in use. This ensures that you can see exactly where you are placing the push stick in relation to the blade or cutter. The bright color also makes the push stick easy to locate when it stored away.
- The Magnetic Handle Push Stick measures approximately 12 long and has an ergonomically designed handle that delivers more precise control and a comfortable grip. The push stick also has a hole drilled into the handle just in case you don t have any metal surfaces to place the push stick. The hole allows you to hang the push stick just a like the rest of your tools . Includes 2 Safety Push Sticks.
- See more on Amazon...
Brand: Fulton | Manufacturer: Peachtree Woodworking Supply Inc
See On Amazon #22
Fulton Woodworking Tools 6 Pack of Fulton 4 inch Blast Gates with Double Sided Port - for Use With Dust Collection Machinery - Vacuums with 4 inch Hose
Asin: B0BG8X6NPN | Model: 12109 | PartNumber: 12109 | Ean: 0817918023386 | UPC: 817918023386
This Blastgate Features Tapered Ports On Both Sides Of The Blastgate. The Tapered Ports Allow Hoses (Sold Separately) To Be Slipped On And Clamped With Hose Clamps (Sold Separately) With Ease. Tapered Ports Will Also Accept Some Tapered Fittings..
The Fulton Blastgate Is Made From A Durable Abs Plastic Material For Everyday Workshop Use. With An Easy To Open And Close Sliding Gate You’Ll Be Able To Quickly Open And Close Hose Lines To Concentrate Airflow To Where You Need, When You Need It And For Maximum Airflow..
The Sliding Gate Has A Built-In Stop So It Will Not Slide Out When Fully Opened. The Gate Acts Like A Shut Off Valve To Keep Air From Flowing In A Given Direction When It Is Closed. When Opened, Air Will Pass Through Allowing Dust To Be Collected As Needed..
Ideally, The Way Blastgates Should Work, Is That You Should Have A Blastgate Setup For Every Machine In Your Workshop. When You Close All The Blastgates To All The Other Machines, You Increase The Airflow Or Suction To The Machine Being Used. This Means That You Should See Less Dust On The Machine That Is Being Used Since It Is Getting Maximum Airflow Or Suction. This Also Helps Reduce The Amount Of Wear And Tear On Your Dust Collector..
Features
- When creating or adding to our dust collection system, there are a great many details we need to keep in mind. Typically, we will have one dust collector connected to multiple machines around the shop. While this kind of works, it can work much better if you could turn off the airflow to all the machines except for the one being used at the moment. That s where blastgates step in. Simply open or close the blastgate to allow or block airflow to a specific machine
- Ideally, the way blastgates should work, is that you should have a blastgate setup for every machine in your workshop. When you close all the blastgates to all the other machines, you increase the airflow or suction to the machine being used. This means that you should see less dust on the machine that is being used since it is getting maximum airflow or suction. This also helps reduce the amount of wear and tear on your dust collector.
- This blastgate features tapered ports on both sides of the blastgate. The tapered ports allow hoses (sold separately) to be slipped on and clamped with hose clamps (sold separately) with ease. Tapered ports will also accept some tapered fittings.
- The sliding gate has a built-in stop so it will not slide out when fully opened. The gate acts like a shut off valve to keep air from flowing in a given direction when it is closed. When opened, air will pass through allowing dust to be collected as needed.
- The Fulton blastgate is made from a durable ABS plastic material for everyday workshop use. With an easy to open and close sliding gate you ll be able to quickly open and close hose lines to concentrate airflow to where you need, when you need it and for maximum airflow.
- See more on Amazon...
Brand: Fulton Woodworking Tools | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon #23
Fulton 142311 Single Speed Winch with 20' Strap and Cover - 1400 lbs. Capacity, 1 Pack
Asin: B06WRTGLHG | Model: 142311 | PartNumber: 142311 | Ean: 0016118142631 | UPC: 016118142631
High-Carbon Steel Gears For Superb Strength And Long-Term Durability.
Includes 20 Foot Strap With Metal Slip Hook And Safety Latch, And Cover.Fit Type: Vehicle Specific.
Stamped Carbon Steel Frame Provides Rigidity, Important For Gear Alignment And Longer Cycle Life.
Features An Efficient Gear Ratio, Full-Length Drum Bearings, Oil-Impregnated Shaft Bushings, And An 8 Inch 'Comfort Grip' Handle For Ease Of Cranking.
Features
- 1, 400 lb. capacity winch designed to meet your toughest pulling demands
- features an efficient gear ratio, full-length drum bearings, oil-impregnated shaft bushings, and an 8 inch 'comfort grip' handle for ease of cranking
- high-carbon steel gears for superb strength and long-term durability
- stamped carbon steel frame provides rigidity, important for gear alignment and longer cycle life
- includes 20 foot strap with metal slip hook and safety latch, and cover.Fit type: Vehicle Specific
- See more on Amazon...
First Available: 05/02/2017
Brand: Fulton | Manufacturer: Fulton
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 8.11 Pounds
Warranty: 5 Year
See On Amazon #24
Fulton FW32000101 F2 Two-Speed Trailer Winch with Strap - 3200 lb. Load Capacity - Silver And Black - one size
Asin: B0036PUHN6 | Model: FW32000101 | PartNumber: FW32000101 | Ean: 0783192025227, 0014445389118, 0086000101336 | UPC: 086000101336, 783192025227, 014445389118
One Piece Corrosion Resistant Aluminum Frame And One Piece Corrosion Resistant Aluminum Handle.
Includes Strap Guide, 20 Foot Heavy Duty Winch Strap And All Mounting Hardware.
4-Position Handle Adjusts From 6 Inch To 9 Inch.
Dual Gear Drum Operates Smoothly.
Features
- 3,200 pounds capacity, One-handed system shifts from high to low speed
- Dual gear drum operates smoothly
- One piece corrosion resistant aluminum frame and one piece corrosion resistant aluminum handle
- 4-position handle adjusts from 6 inch to 9 inch
- Includes strap guide, 20 foot heavy duty winch strap and all mounting hardware
- See more on Amazon...
First Available: 10/28/2015
Brand: Fulton | Manufacturer: Fulton
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 8.50 Pounds
Warranty: Lifetime
See On Amazon #25
Fulton 10 inch Long Forstner Bit Extension for Adding Over 8" of Drilling Depth to Your Forstner Bit Ideal for Wood Turners Furniture Carpentry and Construction (3/8 inch Collet)
Asin: B07ZTJT9GC | Model: 2206 | PartNumber: 2206 | Ean: 0817918022440 | UPC: 817918022440
One Of The Most Common Uses For The Forstner Bit Extension Is For Woodturners Who Need To Bore Out Starter Holes On Larger Vessels. However, The Extension Works Exceptionally Well For Projects Like Salt Shakers, Pepper Mills Or Even Wood Turned Beverage Mugs. Contractors Use The Extension When They Need To Bore Deep Holes For Running Cables Or Wires And They Also Use It For Joining Larger Timbers..
The Collet Outside Diameter Is 25/32 Inch Without The Set Screws Protruding Outward. The Reason This Is Important Is That As We Mentioned Earlier, Some Bits May Have Slightly Different Shank Sizes. This Means The Set Screws May Protrude Outwardly From The Collet. The Minimum Size Hole This Extension Will Allow You To Drill Is 13/16 Inch. Forstner Bits And Machinery Shown In Pictures Are Not Included..
The Forstner Bit Extender Is Made From Solid, Heavy Duty Machined Steel. It Is Designed To Be Used With Forstner Bits Only. The Collet Inside Diameter Is 3/8 Inch. This Tolerance Is Very Tight And Designed To Accept Forstner Bits With Shank Sizes Of 3/8 Inch Or Slightly Smaller. Please Note That Some Forstner Bit Manufacturers Produce Bits That Say 3/8 Inch Shank Size When In Fact They Are Not. If You Measure Your Bit Shank And It Is 3/8 Inch, Your Bit Should Fit Once The Set Screws Are Loosened.
The Forstner Bit Extension Gives You Additional 8-1/2 Inches Of Reach To Bore Deeper Into Your Projects. This Will Help You Create Larger Diameter Starter Holes Or Help When You Need To Drill In Just A Little Further Than The Standard Bit Length Will Allow. The Extension Can Be Used With Forstner Bits On Drill Presses, Lathes With A Drill Chuck Installed (Drill Chuck Not Included) Or With A Power Drill..
Features
- Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
- The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
- One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
- The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
- The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
- See more on Amazon...
Brand: Fulton | Manufacturer: Peachtree Woodworking Supply Inc.
Weight: 1.00 pounds
See On Amazon #26
Fulton Medium Duty Sawhorse Brackets, 1 Pair
Asin: B0002YXEIE | Model: 300SHB | PartNumber: 300SHB
Ean: 8850535130930, 0754335059355, 0735090606206, 0045081003007, 0602460326371, 7241870697027, 0785533765939, 7535001129304
UPC: 045081003007, 602460326371, 735090606206, 754335059355, 785533765939
Flared Nail Holes For Quick Assembly & Easy Storage.
Made In Usa.
Extra Long For Added Strength.
Features
- Medium Duty
- Extra Long For Added Strength
- Flared Nail Holes For Quick Assembly & Easy Storage
- Made in USA
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Corporation
Dimensions: 5.75 x 7.50 x 4.00 Inches | Weight: 1.00 Pounds
Warranty: one year
See On Amazon #27
Fulton Taper Cutting Jig For Creating Tapered Angles Up to 15 Degrees on Your Table Saw 24 Inch Long Aluminum Rails with Scale and Stop
Asin: B001N1FYSI | Model: 1264 | PartNumber: 1264 | Ean: 0810948010012, 0735090027698 | UPC: 810948010012, 735090027698
Our Taper Jig Will Most Certainly Enhance Your Woodworking Abilities And Your Woodworking Projects. This Easy To Use Jig Is Fully Adjustable For Right Or Left Hand Use. As Well As Its Ability To Work On Either The Left Or Right Side Of Your Table Saw Fence..
Constructed Of Durable Aluminum The Fulton Taper Cutting Jig Comes With An Easy Grip Handle, Adjustable 24 Inch Rails With Fixed Stop, Easy-To-Read Graduated Scale That Measures 0 To 15 Degrees Of Taper (Or 3 Inches Per Foot) And Full Instruction Sheet..
Two Ways To Set The Jig. First Use The Scale That Has Markings Up To 15 Degrees Of Taper. Second Mark The Starting Cut At One End And Then Mark The Exit Cut At The Other End Of Your Piece Of Stock. Then Simply Adjust The Taper Jig To Match Those Two Marks..
The Fulton Taper Cutting Jig Has Been Designed To Make Long Rip Cuts At Angles From 1 Deg To 15 Degrees Using Your Table Saw. Perfect For Building Woodworking Projects Like Table Legs, Chair Legs, Magazine Racks And More Where Slight Tapers Are Common..
Features
- Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
- The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
- Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
- Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
- Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton
Dimensions: 1.50 x 24.40 x 3.00 Inches | Weight: 1.79 Pounds
See On Amazon #28
Fulton 12 inch Extra Long Brad Point Drill Bit Set with 7 Total Drill Bits Ideal for Wood PVC Resin Composite MDF and Drywall (Sheet Rock) Materials
Asin: B0013EOWCE | Model: 916 | PartNumber: 916 | Ean: 0810948016076 | UPC: 810948016076
Made From High Speed Steel, These Bits Are Ideal For Many Different Project Types And Materials. Drill Into Mdf, 4 X 4’S, 6 X 6’S, Pvc, Resin’S, Composites, Plywood And More. Since Each Bit Has A Sharp (Brad Point) Tip, It Is Recommended That You Do Not Use These Bits To Drill Into Metal Objects..
Each High Speed Steel Bit Is Made In The Auger Spiral Style. The Reason For This Is To Help Clear Build Up And Chips As You Drill. When Using Any Drill Bit And Especially Longer Bits Like These, You Must Always Clear The Bit By Pulling It Back Out Of The Hole To Discharge The Build Up And Chips. This Helps Reduce Friction And The Overall Stress On The Bit Producing A Much Smoother Hole And Overall Drilling Experience..
Brad Point Drill Bits Are Specifically Designed For Better Hole Location Accuracy. The Sharp Point On The Tip Allows You To Precisely Locate Your Mark With The Bit And With A Little Pressure, The Bit Won’T Slip Or Walk As You Initiate The Drilling Process. This Makes Brad Point Drill Bits Excellent For Woodworkers, Carpenters, Diyer’S And More!.
Many Times When Working Around The House Or Out On The Job Site, We Come Across A Situation Where We Need To Drill Through Thicker Material Like A 6 X 6 Or 4 X 4 When Building Things Like An Privacy Fence Or Even Rough Building Applications. These Fulton Extra Long Brad Point Drill Bits Are Perfect For These Situations!.
Features
- Sometimes bigger is better and when it comes to drilling or boring into thick material, bigger is definitely better. Introducing the Fulton high speed steel extra long brad point drill bit set. Each bit measures around 12 inches in total length to provide you with enough drilling length to tackle most any project you can throw at them.
- Many times when working around the house or out on the job site, we come across a situation where we need to drill through thicker material like a 6 x 6 or 4 x 4 when building things like an privacy fence or even rough building applications. These Fulton extra long brad point drill bits are perfect for these situations!
- Made from high speed steel, these bits are ideal for many different project types and materials. Drill into MDF, 4 x 4 s, 6 x 6 s, PVC, Resin s, Composites, Plywood and more. Since each bit has a sharp (brad point) tip, it is recommended that you do NOT use these bits to drill into metal objects.
- Brad Point drill bits are specifically designed for better hole location accuracy. The sharp point on the tip allows you to precisely locate your mark with the bit and with a little pressure, the bit won t slip or walk as you initiate the drilling process. This makes brad point drill bits excellent for woodworkers, carpenters, DIYer s and more!
- Each high speed steel bit is made in the auger spiral style. The reason for this is to help clear build up and chips as you drill. When using any drill bit and especially longer bits like these, you must always clear the bit by pulling it back out of the hole to discharge the build up and chips. This helps reduce friction and the overall stress on the bit producing a much smoother hole and overall drilling experience.
- See more on Amazon...
Brand: Fulton | Manufacturer: Peachtree Woodworking Supply Inc.
Weight: 0.00 Pounds
See On Amazon #29
Peachtree Woodworking Supply 5 inch Sanding Mouse Hook and Loop Sanding Block. For Furniture Restoration, Home, Automotive. Hand Sander Accepts Standard Orbital Sanding Discs w/Hook and Loop Backing
Asin: B00HJBSHG2 | Model: 33 | PartNumber: 33 | Ean: 0814310017111 | UPC: 814310017111
A One Of A Kind, Ergonomically Designed Sanding Tool That Is So Simple And Feels So Familiar In Our Hands, It’S A Wonder Why It Took So Long For Someone To Think Of It. The Sanding Mouse Is Made From A Sturdy, Yet Flexible Composite Material And Has A Hook And Loop Base. The Hook And Loop Base Is Designed To Accept Orbital Sanding Discs That Most Of Us Already Have In Our Shop..
The Sides Of The Sanding Mouse Are Uniquely Angled Slightly Inward. This Helps When Getting Into Corners Of Cabinets Or Anywhere You Need To Get Up Against A Side Wall Of A Project. It’S A Tremendous Feature That Will Help Most All Of Us Out When Sanding Book Cases, Cabinets, Desks, Counter Tops And More. The Sanding Mouse Is Available In 5” Or 6” Sizes And Are Sold Separately..
It Will Work With Any Hole Pattern Of Sanding Disc Or Even No Hole Sanding Discs. Your Hook And Loop Paper Will Easily Attach And Easily Come Off Of The Sanding Mouse When Its Time To Change Paper Or Grits..
Other New Fangled “Sanding Blocks” Have Clips That Sort Of Work Until They Don’T And Even More Types Force You To Buy Expensive Sanding Belts To Fit There Version Of A “Sanding Block”. It Would Be Great If We Just Use The Sandpaper Most Of Us Already Have In Our Shops. Introducing The Sanding Mouse!.
Features
- This is the perfect sanding accessory that looks and feels just like a sander should unlike there distant cousins sanding blocks. Sanding blocks are just that, sanding blocks. They can be kind of handy but keeping the sandpaper on the block can be a bit of a challenge and they are altogether clunky to use.
- Other new fangled sanding blocks have clips that sort of work until they don t and even more types force you to buy expensive sanding belts to fit there version of a sanding block . It would be great if we just use the sandpaper most of us already have in our shops. Introducing the Sanding Mouse!
- A one of a kind, ergonomically designed sanding tool that is so simple and feels so familiar in our hands, it s a wonder why it took so long for someone to think of it. The Sanding Mouse is made from a sturdy, yet flexible composite material and has a hook and loop base. The Hook and loop base is designed to accept orbital sanding discs that most of us already have in our shop.
- It will work with any hole pattern of sanding disc or even no hole sanding discs. Your hook and loop paper will easily attach and easily come off of the Sanding Mouse when its time to change paper or grits.
- The sides of the Sanding Mouse are uniquely angled slightly inward. This helps when getting into corners of cabinets or anywhere you need to get up against a side wall of a project. It s a tremendous feature that will help most all of us out when sanding book cases, cabinets, desks, counter tops and more. The Sanding Mouse is available in 5 or 6 sizes and are sold separately.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Fulton
Dimensions: 0.04 x 5.00 x 5.00 Inches
See On Amazon #30
Fulton 2 1/2 Inch Thumb Screw Key Adjustable 304 Stainless Steel Hose Clamps, Pipe Clamp, Worm Gear Clamps, Dryer Vent Clamp, Dust Collection, Automotive, RV Clamp 10 pack (2 1/2" Hose Clamps)
Asin: B07PDSLWN6 | Ean: 0817918022082 | UPC: 817918022082
Often Used In These Applications – These Unique Clamps Are Typically Used In Securing Duct Work, Dryer Vents, Dust Collection Hoses, Piping, Large Cable, Pvc Tubing And More. Ideal For Use In Automotive, Industrial, Mechanical, Agriculture, Boat/Marine, Shield, Recreational Vehicles, Household And More. Works For Both Indoor Or Outdoor Use..
Flexible Adjustable Size Range- 2 1/2 Inch Hose Clamps Are Flexible And Workable With A Rather Wide Adjustable Size Range From Appx. 2-7/8” (2.877” Or 73.08Mm) In Full Diameter Down To Appx. 1-7/8” (1.874” Or 47.61Mm) At Its Most Compact Diameter..
304 Stainless Steel Hose Clamp- The 2 ½” Diameter Large Hose Duct Clamp (Including The Housing, The Band And The Internal Screw Are Made From Premium 304 Stainless Steel. This Makes The Clamp Strong, Durable And Rust Resistant Which Makes It Ideal For Many Applications In The Shop Or Around The Home..
Large Easy To Turn Key - The Easy To Turn And Easy To See Blue Key Is Made From A Strong And Durable Polymer. The Key Is Designed To Make The Securing And Un-Securing Of Hose Much Easier On The Knuckles. No More Knuckle Busting Flat Head Screw Drivers Or Tiny Socket Wrenches. Simply To Turn The Key Clockwise To Tighten, Counter Clockwise To Loosen..
Features
- NO MORE TOOLS! Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them.
- LARGE EASY TO TURN KEY - The easy to turn and easy to see blue key is made from a strong and durable polymer. The key is designed to make the securing and un-securing of hose much easier on the knuckles. No more knuckle busting flat head screw drivers or tiny socket wrenches. Simply to turn the key clockwise to tighten, counter clockwise to loosen.
- OFTEN USED IN THESE APPLICATIONS These unique clamps are typically used in securing duct work, dryer vents, dust collection hoses, piping, large cable, pvc tubing and more. Ideal for use in automotive, industrial, mechanical, agriculture, boat/marine, shield, recreational vehicles, household and more. Works for both indoor or outdoor use.
- 304 STAINLESS STEEL HOSE CLAMP- The 2 diameter large hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home.
- FLEXIBLE ADJUSTABLE SIZE RANGE- 2 1/2 inch hose clamps are flexible and workable with a rather wide adjustable size range from appx. 2-7/8 (2.877 or 73.08mm) in full diameter down to appx. 1-7/8 (1.874 or 47.61mm) at its most compact diameter.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
See On Amazon