Peachtree Woodworking Supply Extendable Heavy Duty Floor and Wall Roller for Laminate, LVP, Veneer, Linoleum, Carpet, Tile and Wall Coverings 7-1/2 Wide with a 17 inch Handle That Extends to 27 inches
Asin: B07SGRJ1H8 | Model: FBA-2214 | PartNumber: FBA-2214 | Ean: 0817918022204 | UPC: 817918022204
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Extendable Handle Has A Black, Rubber Handle Bar Style Grip For Comfort. With A Simple Counter Clockwise Twist, The Secondary Handle Can Be Extended To A Full 27” Long! Talk About Leverage! This Makes It Perfect For Many Different Types Of Applications. Once You Loosen The Handle, Simply Pull It Out Too Length Up To 27” And Then Simply Twist The Handle Back Clockwise To Lock It In. Now You Will Be Able To Apply Pressure To Most Any Project Large Or Small..
Each Of The Segmented Rollers Are Made Of A Solid Non Marring Rubber Material So Your Work Surface Is Safe From Being Marked Or Damaged When Using It. Each Roller Is Approx. 1-1/2” In Diameter And 2-7/32” Long For A Total Of 7-1/2” Wide Rolling Surface..
We Designed The 3 Rollers To Be Set In A Segmented Fashion So The Pressure Action Of The Rollers Will Be Evenly And Directly Distributed Behind Each Roller Producing Excellent Results When Pressure Is Applied. Some Press Rollers Use A Single Roller Type Of Tool Which Tends To Produce Inconsistent And Uneven Results..
The Heavy Duty Cast Leverage Handle Allows You Lean Into To Apply As Much Pressure As Needed And Will Take Virtually All Of Your Weight Behind It. This Helps You Press And Roll Out Your Material As Efficiently And As Quickly As Possible. Perfect For Flooring Projects.
Features
- The Extendable Heavy Duty Segmented Roller provides excellent leverage while applying pressure to linoleum, carpets, tile, wall coverings, laminates, large veneer projects and more! Projects that were once difficult are now a cinch with this rugged tool with its ergonomic, heavy duty leverage handle and rubber rollers.
- The heavy duty cast leverage handle allows you lean into to apply as much pressure as needed and will take virtually all of your weight behind it. This helps you press and roll out your material as efficiently and as quickly as possible. Perfect for flooring projects
- The extendable handle has a black, rubber handle bar style grip for comfort. With a simple counter clockwise twist, the secondary handle can be extended to a full 27 long! Talk about leverage! This makes it perfect for many different types of applications. Once you loosen the handle, simply pull it out too length up to 27 and then simply twist the handle back clockwise to lock it in. Now you will be able to apply pressure to most any project large or small.
- We designed the 3 rollers to be set in a segmented fashion so the pressure action of the rollers will be evenly and directly distributed behind each roller producing excellent results when pressure is applied. Some press rollers use a single roller type of tool which tends to produce inconsistent and uneven results.
- Each of the segmented rollers are made of a solid non marring rubber material so your work surface is safe from being marked or damaged when using it. Each roller is approx. 1-1/2 in diameter and 2-7/32 long for a total of 7-1/2 wide rolling surface.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Fulton
See On Amazon Similar To Peachtree Woodworking Supply Extendable Heavy
#1
Fulton Long Handle J Roller with Thick Rubber Roller 1-1/2 in Diameter by 2-7/8 Wide For Veneers Laminate Wall Coverings and Edge Banding for Maximum Pressure Adhesion
Asin: B00409KRB4 | Model: 2212 | PartNumber: 2212 | Ean: 0810948015000 | UPC: 810948015000
A Full 12” Long, The J-Roller Is The Perfect Length To Handle Most Any Project Where You Need To Apply Sheet Goods To Another Surface. The Roller Is Made From A Firm, Non-Marring, Textured Rubber Material That Helps You Apply Pressure Where It Is Needed. The Roller Wall Is About 3/8” Thick So It Will Stand Up To The Rigorous Chore Of Applying Pressure To Your Sheet Goods..
Using The Fulton J-Roller Gives You The Ability To Evenly Apply Pressure To Your Veneer, Laminates And Wall Coverings To Provide Maximum Adhesion. Perfect For Working Many Of Those Project Types Around The House Or In Your Woodworking Shop. The Roller Measures Approximately 2-7/8” Wide..
The Heavy Duty Steel Handle Is Designed To Help You Exert As Much Pressure As Possible To The Work Surface. The Handle Is Wrapped With Two Separate Sections Of Comfortable Rubber Grips For Extended Use And Less Hand Fatigue. The Bottom Of The Handle Forms The “J” To Attach The Heavy Duty Rubber Roller Without Getting In The Way Of Your Rolling Process..
When Applying Veneer On Wood For Example, You Generally Need To Exert A Good Amount Of Even Downward Pressure On The Veneer Sheet Or Roll. To Do This, We Could Use A Flat Bar Of Some Sort, But That Generally Won’T Be Even Enough And Can’T Get Into The Slight Undulations Of The Wood Surface. The Fulton J-Roller Is The Perfect Width To Properly Work The Veneer For Proper Adhesion..
Features
- Applying veneer, laminate or even wall coverings usually requires some tools that you may not find in your neighborhood big box store or even at a local mom and pop hardware store. The Fulton J-Roller is one of those items and is the ideal tool for applying pressure to your sheet or paper goods to ensure proper adhesion to your work surface.
- When applying veneer on wood for example, you generally need to exert a good amount of even downward pressure on the veneer sheet or roll. To do this, we could use a flat bar of some sort, but that generally won t be even enough and can t get into the slight undulations of the wood surface. The Fulton J-Roller is the perfect width to properly work the veneer for proper adhesion.
- A full 12 long, the J-Roller is the perfect length to handle most any project where you need to apply sheet goods to another surface. The roller is made from a firm, non-marring, textured rubber material that helps you apply pressure where it is needed. The roller wall is about 3/8 thick so it will stand up to the rigorous chore of applying pressure to your sheet goods.
- The heavy duty steel handle is designed to help you exert as much pressure as possible to the work surface. The handle is wrapped with two separate sections of comfortable rubber grips for extended use and less hand fatigue. The bottom of the handle forms the J to attach the heavy duty rubber roller without getting in the way of your rolling process.
- Using the Fulton J-Roller gives you the ability to evenly apply pressure to your veneer, laminates and wall coverings to provide maximum adhesion. Perfect for working many of those project types around the house or in your woodworking shop. The roller measures approximately 2-7/8 wide.
- See more on Amazon...
Brand: Fulton | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon #2
Peachtree Woodworking Supply Cleaning Eraser Stick Small 1-1/2" x 1-1/2" x 7-7/8" Made from Natural Rubber for Removing Dust and Build up from Abrasive Belts Sanding Discs Drum Sanders Grip Tape
Asin: B000H69U7G | Model: 187 | PartNumber: 187 | Ean: 0810948010838 | UPC: 810948010838
It Works Almost Like An Old Fashioned Pencil Eraser. As You Rub Or Slide The Stick Across An Abrasive Surface The Stick Quickly Loosens And Removes Foreign Materials. Your Abrasives Will Be Brought Back To Life To Continue Sanding. If You Have Power Sanders Like Belt Sanders You Can Simply Hold The Stick Up Against The Sanding Belt While The Power Is On And Watch The Belt Be Cleaned Right Before Your Eyes!.
The Natural Rubber Cleaning Eraser Stick Also Works Exceptionally Well On Skateboard Grip Surfaces Which Tend To Get Dirty Rather Quickly. Once Clean, The Skateboard Surface Is Almost As Good As New And Keeps Its Grip A Whole Lot Longer. Similar To Skateboard Grip Surfaces, Abrasive Or Grip Tape That’S Used On Floor Areas That Can Get Slippery Can Be Easily Cleaned Using The Eraser Stick..
Clean Various Items Around The House, Workshop Or In The Garage. The Rubber Construction Of The Stick Works Best On Belt Sanders To Allow Your Belts To Cut Faster And Last Longer All The While It Can Also Be Used On Disc Sanders, Drum Sanders, Rubber Bottom Shoes (Not Plastic), Skateboard Grip Tape, Grip Tape And A Whole Lot More!.
The Natural Rubber Cleaning Eraser Stick Removes Most All Of The Residue. Use Stick After Your Sander Has Been Clogged With Wood Dust And/Or Wood Resin To Return The Sanding Surface To A Like-New Condition; Pulls Dust, Wood Particles, Sap, Metal Shavings, Paint, And Other Residue Out Of Sanders And Other Abrasive Materials..
Features
- Sanding most anything is a chore that we all don t typically care to do. To make things worse, the sandpaper seems to become useless just after a few strokes. What if you could rejuvenate your sandpaper so you could get a whole lot more mileage out of it? Now you can with our natural rubber cleaning eraser stick! Simply rub the stick across the abrasive surface and watch the dust, crud, resin and natural build up disappear!
- The natural rubber cleaning eraser stick removes most all of the residue. Use stick after your sander has been clogged with wood dust and/or wood resin to return the sanding surface to a like-new condition; Pulls dust, wood particles, sap, metal shavings, paint, and other residue out of sanders and other abrasive materials.
- It works almost like an old fashioned pencil eraser. As you rub or slide the stick across an abrasive surface the stick quickly loosens and removes foreign materials. Your abrasives will be brought back to life to continue sanding. If you have power sanders like belt sanders you can simply hold the stick up against the sanding belt while the power is on and watch the belt be cleaned right before your eyes!
- Clean various items around the house, workshop or in the garage. The rubber construction of the stick works best on belt sanders to allow your belts to cut faster and last longer all the while it can also be used on disc sanders, drum sanders, rubber bottom shoes (not plastic), skateboard grip tape, grip tape and a whole lot more!
- The natural rubber cleaning eraser stick also works exceptionally well on skateboard grip surfaces which tend to get dirty rather quickly. Once clean, the skateboard surface is almost as good as new and keeps its grip a whole lot longer. Similar to skateboard grip surfaces, abrasive or grip tape that s used on floor areas that can get slippery can be easily cleaned using the eraser stick.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Weight: 0.57 pounds
See On Amazon #3
5" x 10' (5 inch diameter by 10 feet long) Ultra-Flex Clear Vue Heavy Duty PVC Dust, Debris and Fume Collection Hose - MADE IN USA!
Asin: B07VYNDXTV | Model: 6171 | PartNumber: 6171 | Ean: 0817918022310 | UPC: 817918022310
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
While Pvc Hose Can Be Used On Other Machinery Or Devices It Has Been Designed For Dust Collection Purposes. The Hose Temperature Range Is -20° F To 165° F Which Is Ideal For Indoor Use Like In A Woodworking Or Workshop Environment. The Clear Hose Wraps Around A Black Carbon Steel Wire Helix That Reinforces The Hose To Keep It From Kinking And Is Capable Of An Electrostatic Discharge When Properly Grounded At Both Ends Of The Hose..
This Pvc Hose Is Clear Which Allows You To See What’S Going On Inside The Hose While The Dust And Debris Are Flowing Through It. Not Only Can You See The Dust And Debris, You Can Also See If Any Build Up Or Blockage Has Occurred. Being Able To See This Makes Fixing Any Suction Issues With The Hose Much Easier Than Typical Opaque Hoses..
Typically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
Dimensions: 0.04 x 120.00 x 5.00 inches
See On Amazon #4
Fulton Taper Cutting Jig For Creating Tapered Angles Up to 15 Degrees on Your Table Saw 24 Inch Long Aluminum Rails with Scale and Stop
Asin: B001N1FYSI | Model: 1264 | PartNumber: 1264 | Ean: 0810948010012, 0735090027698 | UPC: 810948010012, 735090027698
Our Taper Jig Will Most Certainly Enhance Your Woodworking Abilities And Your Woodworking Projects. This Easy To Use Jig Is Fully Adjustable For Right Or Left Hand Use. As Well As Its Ability To Work On Either The Left Or Right Side Of Your Table Saw Fence..
Constructed Of Durable Aluminum The Fulton Taper Cutting Jig Comes With An Easy Grip Handle, Adjustable 24 Inch Rails With Fixed Stop, Easy-To-Read Graduated Scale That Measures 0 To 15 Degrees Of Taper (Or 3 Inches Per Foot) And Full Instruction Sheet..
Two Ways To Set The Jig. First Use The Scale That Has Markings Up To 15 Degrees Of Taper. Second Mark The Starting Cut At One End And Then Mark The Exit Cut At The Other End Of Your Piece Of Stock. Then Simply Adjust The Taper Jig To Match Those Two Marks..
The Fulton Taper Cutting Jig Has Been Designed To Make Long Rip Cuts At Angles From 1 Deg To 15 Degrees Using Your Table Saw. Perfect For Building Woodworking Projects Like Table Legs, Chair Legs, Magazine Racks And More Where Slight Tapers Are Common..
Features
- Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
- The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
- Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
- Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
- Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton
Dimensions: 1.50 x 24.40 x 3.00 inches | Weight: 1.79 pounds
See On Amazon #5
Fulton 12 inch Extra Long Brad Point Drill Bit Set with 7 Total Drill Bits Ideal for Wood PVC Resin Composite MDF and Drywall (Sheet Rock) Materials
Asin: B0013EOWCE | Model: 916 | PartNumber: 916 | Ean: 0810948016076 | UPC: 810948016076
Made From High Speed Steel, These Bits Are Ideal For Many Different Project Types And Materials. Drill Into Mdf, 4 X 4’S, 6 X 6’S, Pvc, Resin’S, Composites, Plywood And More. Since Each Bit Has A Sharp (Brad Point) Tip, It Is Recommended That You Do Not Use These Bits To Drill Into Metal Objects..
Each High Speed Steel Bit Is Made In The Auger Spiral Style. The Reason For This Is To Help Clear Build Up And Chips As You Drill. When Using Any Drill Bit And Especially Longer Bits Like These, You Must Always Clear The Bit By Pulling It Back Out Of The Hole To Discharge The Build Up And Chips. This Helps Reduce Friction And The Overall Stress On The Bit Producing A Much Smoother Hole And Overall Drilling Experience..
Brad Point Drill Bits Are Specifically Designed For Better Hole Location Accuracy. The Sharp Point On The Tip Allows You To Precisely Locate Your Mark With The Bit And With A Little Pressure, The Bit Won’T Slip Or Walk As You Initiate The Drilling Process. This Makes Brad Point Drill Bits Excellent For Woodworkers, Carpenters, Diyer’S And More!.
Many Times When Working Around The House Or Out On The Job Site, We Come Across A Situation Where We Need To Drill Through Thicker Material Like A 6 X 6 Or 4 X 4 When Building Things Like An Privacy Fence Or Even Rough Building Applications. These Fulton Extra Long Brad Point Drill Bits Are Perfect For These Situations!.
Features
- Sometimes bigger is better and when it comes to drilling or boring into thick material, bigger is definitely better. Introducing the Fulton high speed steel extra long brad point drill bit set. Each bit measures around 12 inches in total length to provide you with enough drilling length to tackle most any project you can throw at them.
- Many times when working around the house or out on the job site, we come across a situation where we need to drill through thicker material like a 6 x 6 or 4 x 4 when building things like an privacy fence or even rough building applications. These Fulton extra long brad point drill bits are perfect for these situations!
- Made from high speed steel, these bits are ideal for many different project types and materials. Drill into MDF, 4 x 4 s, 6 x 6 s, PVC, Resin s, Composites, Plywood and more. Since each bit has a sharp (brad point) tip, it is recommended that you do NOT use these bits to drill into metal objects.
- Brad Point drill bits are specifically designed for better hole location accuracy. The sharp point on the tip allows you to precisely locate your mark with the bit and with a little pressure, the bit won t slip or walk as you initiate the drilling process. This makes brad point drill bits excellent for woodworkers, carpenters, DIYer s and more!
- Each high speed steel bit is made in the auger spiral style. The reason for this is to help clear build up and chips as you drill. When using any drill bit and especially longer bits like these, you must always clear the bit by pulling it back out of the hole to discharge the build up and chips. This helps reduce friction and the overall stress on the bit producing a much smoother hole and overall drilling experience.
- See more on Amazon...
Brand: Fulton | Manufacturer: Peachtree Woodworking Supply Inc.
Weight: 0.00 pounds
See On Amazon #6
Peachtree Woodworking 2-1/2" x 10' Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose
Asin: B001JBANX8 | Model: 367 | PartNumber: 367 | Ean: 0810948014010 | UPC: 810948014010
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
While Pvc Hose Can Be Used On Other Machinery Or Devices It Has Been Designed For Dust Collection Purposes. The Hose Temperature Range Is -20° F To 165° F Which Is Ideal For Indoor Use Like In A Woodworking Or Workshop Environment. The Clear Hose Wraps Around A Black Carbon Steel Wire Helix That Reinforces The Hose To Keep It From Kinking And Is Capable Of An Electrostatic Discharge When Properly Grounded At Both Ends Of The Hose..
This Pvc Hose Is Clear Which Allows You To See What’S Going On Inside The Hose While The Dust And Debris Are Flowing Through It. Not Only Can You See The Dust And Debris, You Can Also See If Any Build Up Or Blockage Has Occurred. Being Able To See This Makes Fixing Any Suction Issues With The Hose Much Easier Than Typical Opaque Hoses..
Ypically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- ypically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
- See more on Amazon...
Brand: Peachtree Woodworking | Manufacturer: ECTY
Dimensions: 3.00 x 12.00 x 12.00 inches | Weight: 3.00 pounds
See On Amazon #7
Peachtree Woodworking 19 inch Precision Aluminum Miter Bar Rail Runner w/Adjustable Spring Loaded Plungers DIY Table Saw Crosscut Sleds Jigs Works w/ 3/4 by 3/8 inch Miter Slots Mounting Hardware
Asin: B0B2G3H688 | Model: 4783 | PartNumber: 4783 | Ean: 0817918023072 | UPC: 817918023072
Not Only Is The Aluminum Miter Bar Adjustable, Its Easy To Mount! You Can Mount The Bar From The Top Of Your Sled, Jig Or Fixture Platform Or Base, Or You Can Mount It From The Bottom. There Are Threaded Holes Along The Length Of The Bar For Mounting The Bar Using 1/4 Inch By 20 Tpi Machine Screws (Included). There Are Also Counter Sunk Holes On The Bar To Mount The Bar Using #8 Wood Screws (Included)..
The Bar Is Approximately 19 Inches Long And Will Fit Into Standard (3/4 X 3/8 Inch) Miter T Slots And U-Shaped Miter Slots. Non-Standard Slots Found On Some Job Site Style Table Saws And Other Small Machinery Will Not Accept This Bar Due To The Non-Standard Slot Dimensions. We Recommend That You Measure Your Miter Slot Before Placing Your Order..
Once You Mount The Bars To Your Sled, Jig Or Fixture You Are Sure To Feel The Difference. This Is Especially True When You First Run The Bars Through Your Miter Slots. The Smooth Sliding Action Is Perfect For Crosscut Sleds, Miter Angle Jigs, Shop Made Coping Sleds And A Whole Lot More! Using Two Bars (Only One Is Included) For Even More Stability Works Exceptionally Well..
When Building Sleds, Jigs And Fixtures, One Of The Most Important Aspects Is To Achieve A Smooth Sliding Action Without Side To Side Play. The 19 Inch Precision Aluminum Miter Bar Does Both With Its Solid Aluminum Bar And 5 Adjustable Spring Loaded Plungers. The Plungers Can Be Adjusted With The Included Hex Key Wrench For Just The Right Fit..
Features
- Build your next table saw sled, router table jig or band saw fixture to operate with a smooth sliding action using our 19 inch Precision Aluminum Miter Bar! Attach the aluminum bar to most any type of sled, jig or fixture that is to be used with a 3/4 inch (19mm) by 3/8 inch (9mm) miter slot. Using our aluminum bar versus plastic or wood gives your sled, jig or fixture more strength and stability and it won t bend or warp.
- When building sleds, jigs and fixtures, one of the most important aspects is to achieve a smooth sliding action without side to side play. The 19 inch Precision Aluminum Miter Bar does both with its solid aluminum bar and 5 adjustable spring loaded plungers. The plungers can be adjusted with the included hex key wrench for just the right fit.
- Not only is the Aluminum Miter Bar adjustable, its easy to mount! You can mount the bar from the top of your sled, jig or fixture platform or base, or you can mount it from the bottom. There are threaded holes along the length of the bar for mounting the bar using 1/4 inch by 20 tpi machine screws (included). There are also counter sunk holes on the bar to mount the bar using #8 wood screws (included).
- Once you mount the bars to your sled, jig or fixture you are sure to feel the difference. This is especially true when you first run the bars through your miter slots. The smooth sliding action is perfect for crosscut sleds, miter angle jigs, shop made coping sleds and a whole lot more! Using two bars (only one is included) for even more stability works exceptionally well.
- The bar is approximately 19 inches long and will fit into standard (3/4 x 3/8 inch) miter t slots and u-shaped miter slots. Non-standard slots found on some job site style table saws and other small machinery will NOT accept this bar due to the non-standard slot dimensions. We recommend that you measure your miter slot before placing your order.
- See more on Amazon...
Brand: Peachtree Woodworking | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon #8
Peachtree Woodworking Supply Mounting Track Base Add On for the Tool Rest Sharpening Jig
Asin: B07VB9B2D3 | Ean: 0817918021610 | UPC: 817918021610
When You’Re Done With One Grit For Your Tool, Simply Loosen The Sharpening Jig Knob, Slide The Jig Out And Then Slide The Jig Back Into The Other Side! It Literally Takes Seconds To Switch From One Wheel To Another! This Makes The Tools Rest Sharpening Jig Even More Versatile Than It Already Is!.
If You Already Own The Jig, Then You Owe To Yourself To Get At Least One Mounting Track, If You Are Thinking About Purchasing The Tool Rest Sharpening Jig, Then We Encourage You To Consider Getting An Extra Mounting Track To Conveniently Work Both Wheels On Your Grinder. The Mounting Track Is Installed Using Four Wood Screws Which Are Included..
Made From The Exact Same Extruded Aluminum Material As The Original Mounting Track. The Mounting Track Not Only Allows Quick Switch Outs But It Also Allows You To Quickly Adjust The Jig Forward Or Backward Depending On What Type Of Tool You Are Sharpening..
Now, With An Extra Mounting Track Base You Can Have A Mounting Track For Each Of Your Two Wheels On Your Grinder! Once Both Mounting Tracks Have Been Installed, All You Have To Do Is Slide The Sharpening Jig Into One Side Or The Other And Start Sharpening!.
Features
- If you already own one of the Tool Rest Sharpening Jigs, then you know how versatile it is. Being able to accurately hone your tools can certainly be satisfying. Sometimes though it would be nice if we could have the ability to move the sharpening jig to the other side of the bench grinder to sharpen your tools with a different grit wheel.
- Now, with an extra Mounting Track Base you can have a mounting track for each of your two wheels on your grinder! Once both Mounting Tracks have been installed, all you have to do is slide the Sharpening Jig into one side or the other and start sharpening!
- When you re done with one grit for your tool, simply loosen the sharpening jig knob, slide the jig out and then slide the jig back into the other side! It literally takes seconds to switch from one wheel to another! This makes the Tools Rest Sharpening Jig even more versatile than it already is!
- Made from the exact same extruded aluminum material as the original Mounting Track. The Mounting Track not only allows quick switch outs but it also allows you to quickly adjust the jig forward or backward depending on what type of tool you are sharpening.
- If you already own the jig, then you owe to yourself to get at least one Mounting Track, if you are thinking about purchasing the Tool Rest Sharpening Jig, then we encourage you to consider getting an extra Mounting Track to conveniently work both wheels on your grinder. The Mounting Track is installed using four wood screws which are included.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon #9
Fulton Panel Max Glue Press Four Way 43 Inch Long Clamping System For Small and Large Panels. Keep Valuable Floor and Workbench Space Open While Gluing Up 39 Inch Maximum Width Flat Panels
Asin: B07SK954DM | Model: 2952 | PartNumber: 2952 | Ean: 0810948019893 | UPC: 810948019893
The Length You Can Clamp Is Only Limited By The Length Of Your Wall Where The Panel Max Is Mounted, The Number Of Mounting Rails That Are Installed (Where The Vertical Assemblies Are Hung From) And The Amount Of Vertical Press Assemblies You Have. Each Mounting Rail Is Approx. 39-3/8” In Length And My Be Cut To The Desired Size If Necessary..
The Panel Max Glue Press Includes 1 Each 39” Mounting Rail And 3 Each 43” Vertical Clamp Assemblies. We Recommend Using One Vertical Clamp 12” Apart On Center. Keep This In Mind When Deciding What You Need To Get For Your Most Commonly Built Projects. The Package Also Includes Full Instructions To Get You Started And On Your Way To Gluing Up Panels And Boards With Much Less Effort And Aggravation Than Ever Before!.
The Panel Max Can Clamp Panel Widths Up To 41” Using ¾” Stock. With The Max Thickness Stock Of 5” You Can Clamp Panel Widths Up To 39”. You Can Actually Clamp A Single Large Panel, Or You Can Clamp Multiple, More Narrow Panels All At One Time Up To The Capacity Of The Clamp. To Do This, Clamp A Couple Of Smaller Panels Edge To Edge And Leave Out The Glue Between The First Panel Outer Edge And The Next Starting Edge Of The Adjacent Panel To Be Glued..
The Panel Max Glue Press System Applies Even Press On Both Ends And Both Sides Of Your Panel Project Which Helps Create High Quality Joints And Eliminates Buckled Or Warped Panels. This Alone Is Reason Enough To Include This System In Your Workshop Collection Of “Go To” Tools. Of Course, That’S Not All. The Panel Max Has Linking Arms Or More Accurately A Top And Bottom Pressure Assembly That Adjust To Any Thickness Of Stock From 0” Up To 5”..
Features
- Tired of buckled panels, messy gluing tables, heavy pipe clamps or loss of valuable floor or workbench space? Yeah, we were too! The Panel Max Glue Press System not only eliminates each of these issues, it is also user friendly and can be expanded to accommodate most any size panel you need to glue up! It does all this while producing well laminated boards or flat panels each and every time you use it. Much better than traditional clamps like pipe clamps, f-clamps or bar clamps!
- The Panel Max Glue Press System applies even press on both ends and both sides of your panel project which helps create high quality joints and eliminates buckled or warped panels. This alone is reason enough to include this system in your workshop collection of go to tools. Of course, that s not all. The Panel Max has linking arms or more accurately a top and bottom pressure assembly that adjust to any thickness of stock from 0 up to 5 .
- The length you can clamp is only limited by the length of your wall where the Panel Max is mounted, the number of mounting rails that are installed (where the vertical assemblies are hung from) and the amount of vertical press assemblies you have. Each mounting rail is approx. 39-3/8 in length and my be cut to the desired size if necessary.
- The Panel Max can clamp panel widths up to 41 using stock. With the max thickness stock of 5 you can clamp panel widths up to 39 . You can actually clamp a single large panel, or you can clamp multiple, more narrow panels all at one time up to the capacity of the clamp. To do this, clamp a couple of smaller panels edge to edge and leave out the glue between the first panel outer edge and the next starting edge of the adjacent panel to be glued.
- The Panel Max Glue Press includes 1 each 39 mounting rail and 3 each 43 vertical clamp assemblies. We recommend using one vertical clamp 12 apart on center. Keep this in mind when deciding what you need to get for your most commonly built projects. The Package also includes full instructions to get you started and on your way to gluing up panels and boards with much less effort and aggravation than ever before!
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
See On Amazon #10
Robert Sorby Deep Flute Bowl Gouge 3/8 inch Long Length Handle Overall Length 23 inches 842LH-3/8
Asin: B0036AYUNE | Model: 842LH-3/8 | PartNumber: 842LH-3/8 | Ean: 5013035027268
Ash Handle.
Brass Ferrule.
Sharpened Edge Lasts 6 Times Longer Than Carbon Steel.
Features
- High speed steel resists "blued" softening from overheating
- Sharpened edge lasts 6 times longer than carbon steel
- Ash handle
- Brass ferrule
- See more on Amazon...
Brand: Robert Sorby | Manufacturer: Robert Sorby
Dimensions: 1.90 x 23.80 x 1.90 inches | Weight: 1.16 Pounds
See On Amazon #11
Peachtree Woodworking Supply 22" Miter Extension Fence - PW1099
Asin: B000O2KNJ2 | Ean: 0810948011897 | UPC: 810948011897
Adjustable Aluminum Fence Increases The Face Of Your Miter Gauge Or Saw..
Stop Block With Knobs And Bolts Included..
Built In Extension Bar To Increase The Stop Capacity To 36"..
Works On The Left Side Or Right Side Of Your Saw..
Features
- Will improve work support close to the saw blade.
- Works on the left side or right side of your saw.
- Adjustable aluminum fence increases the face of your miter gauge or saw.
- Built in extension bar to increase the stop capacity to 36.
- Stop block with knobs and bolts included.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking
See On Amazon #12
Peachtree Woodworking Supply 16" Table Saw Extension Kit PW1007
Asin: B000O2KNHY | Ean: 0810948011880 | UPC: 810948011880
2Ea. 11" Table Brackets $12.99 Value.
1Ea. Extension Table Plan $8.99 Value.
1Ea. 32" Miter Track $12.99 Value & 4 Ea. Star Knobs And Bolts $6.00 Value.
2Ea. 24" Sections Of T-Track $25.95 Value.
Features
- WOOD PLATFORM AND SAW ARE NOT INCLUDED: The kit includes the following parts;
- 2ea. 24 Sections of T-Track $25.95 value
- 2ea. 11 Table Brackets $12.99 value
- 1ea. 32 Miter Track $12.99 value & 4 ea. Star Knobs and Bolts $6.00 value
- 1ea. Extension Table Plan $8.99 value
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking
See On Amazon #13
Peachtree Woodworking Modular 6" Tool Rest with 1" Diameter Post - 6" Assembled Height
Asin: B01M4QZ5AK | Ean: 0817918020415 | UPC: 817918020415
Virtually Vibration Free Turning.
Assembled Height Is Approx. 6".
Made In The Usa!.
Round Tool Bars Offer Super Smooth Working Surface.
Features
- Made from precision ground polished alloy steel
- Round tool bars offer super smooth working surface
- Virtually vibration free turning
- MADE IN THE USA!
- Assembled Height is approx. 6
- See more on Amazon...
Brand: Peachtree Woodworking | Manufacturer: Peachtree Woodworking
See On Amazon #14
Robert Sorby 842LH-1/4 1/4" Deep Flute Bowl Gouge HHS Long Handle Overall Length 23"
Asin: B001HMVCPM | Model: 842LH | PartNumber: 842LH | Ean: 5013035027244
Ash Handle.
Brass Ferrule.
Sharpened Edge Lasts 6 Times Longer Than Carbon Steel.
Features
- High speed steel resists "blued" softening from overheating
- Sharpened edge lasts 6 times longer than carbon steel
- Ash handle
- Brass ferrule
- See more on Amazon...
Brand: Robert Sorby | Manufacturer: Robert Sorby
Dimensions: 1.95 x 3.60 x 23.70 inches | Weight: 0.00 pounds
See On Amazon #15
Peachtree Woodworking 36" Ratcheting F-Bar Clamp PW650
Asin: B004E89KGE | Ean: 0810948015987 | UPC: 810948015987
Multiple Disc-Clutch.
Over 500 Lbs Of Clamping Pressure.
Wooden Handle With Acme Type Threads.
Suitable For "Close Quarters" Clamping.
Features
- 36" clamp with 2 3/4" reach
- Suitable for close quarters clamping
- Multiple Disc-Clutch
- Wooden handle with ACME type threads
- Over 500 LBS of clamping pressure
- See more on Amazon...
Brand: Peachtree Woodworking | Manufacturer: Peachtree Woodworking
Dimensions: 2.00 x 37.00 x 3.00 inches | Weight: 3.00 pounds
See On Amazon #16
Peachtree Woodworking Supply Deluxe Starter Pen Turning Kit (Classic Slim Style)
Asin: B06XC13DF5 | Ean: 0817918020156 | UPC: 817918020156
1 Each Chrome Pen Kit And 1 Each Gold Pen Kit Included.
Read Full Description Below For Complete List Of Included Parts.
Everything Included In One Convenient Storage Case.
Ideal For Any Level Of Woodturner.
Features
- Create a custom pen as the perfect gift or keepsake
- Ideal for any level of woodturner
- 1 each chrome pen kit and 1 each gold pen kit included
- Everything included in one convenient storage case
- Read full description below for complete list of included parts
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon #17
Peachtree Woodworking Modular 6" Tool Rest with 5/8" Diameter Post - 5-1/4" Assembled Height
Asin: B01M2CBKXJ | Ean: 0817918020408 | UPC: 817918020408
Virtually Vibration Free Turning.
Assembled Height Is Approx. 6".
Made In The Usa!.
Round Tool Bars Offer Super Smooth Working Surface.
Features
- Made from precision ground polished alloy steel
- Round tool bars offer super smooth working surface
- Virtually vibration free turning
- MADE IN THE USA!
- Assembled Height is approx. 6
- See more on Amazon...
Brand: Peachtree Woodworking | Manufacturer: Peachtree Woodworking
See On Amazon #18
Peachtree Woodworking X-LARGE FEATHERBOARD - PW1138
Asin: B001LYJKY6 | Ean: 0810948014683 | UPC: 810948014683
Convert For Use On Table Tops With Miter Slot Using Miter-Slot Jig & Fixture Set (Sold Separately).
Includes 2 Ea 1/4" X 20 Knob And Bolts.
Best Used With A 7/16" T-Slot For Use With 1/4" Has Head Bolts..
Features
- 3/8" X 8-1/2" X 8-1/2" with approx. 8-1/2" up and down adjustment
- Best used with a 7/16 T-Slot for use with 1/4 has head bolts.
- Convert for use on table tops with miter slot using Miter-Slot Jig & fixture set (SOLD SEPARATELY)
- Includes 2 ea 1/4 x 20 knob and bolts
- See more on Amazon...
Brand: Peachtree Woodworking | Manufacturer: PEACHTREE WOODWORKING
See On Amazon #19
Peachtree Woodworking 2 1/2" 4 FT TO 27 FT E Z Flex Dust Collection Hose PW516
Asin: B0048J1VIO | Ean: 0814310011362 | UPC: 814310011362
Hose Works With Standard 2 1/2" Dust Collection Fittings.
Retracts To It's Original Size When Not In Use.
Features
- Extends up to 6x it's original length
- Retracts to it's original size when not in use
- Hose works with standard 2 1/2 dust collection fittings
- See more on Amazon...
Brand: Peachtree Woodworking | Manufacturer: Peachtree Woodworking
Weight: 1.25 Pounds
See On Amazon
Looking For Something Else?
Search