Jerax tools - Buying Guide
Last Updated: 04/27/2024
Share on
Bestselling from Jerax tools on Amazon
- Jerax tools 1/4 to 1-3/8 Inch Step Drill Bit Straight Grooved Double Fluted, M2 High Speed Steel Dri...
- Jerax tools Tungsten Carbide Deburring Chamfer Tool Drill Bit 1/4" to 3/4", Remove Burr, Repair Tool...
- Jerax tools 2 Inch High Speed Steel Step Drill bits, Doubles Flutes Large Step Bits for Hole Drillin...
- Jerax tools Quick Change Step Drill Bit Double Fluted M2 High Speed Steel Drill bits for Hole Drilli...
- Jerax tools M35 HSS 3/8 Inch Step Drill Bit, Single Size Unibit with Double Spiral Flutesfor Drillin...
- Jerax tools Heavy Duty M35 HSS 1-1/8 Inch Step Drill Bit with Four Flutes, 1/4" Quich Change Shank H...
- M2 HSS Taper Chucking Reamer 4pcs Set, 3/8", 1/2", 5/8", 3/4", Fit 3/8" or 1/2" Shank Chuck, Spiral ...
- Jerax tools Tungsten Carbide Tipped Hole Cutter, 7/8 inch TCT Hole Saw with 5mm Hole Depth Heavy Dut...
- Jerax tools R8 Shank Indexable 2" End Mill, 2" Diameter 90 Degree High Speed Milling Cutter with Rep...
- Jerax tools M35 HSS 1/2" Taper Chucking Reamer for enlarging existing Holes, Fit 1/2" Shank Chuck, S...
#1
Jerax tools 1/4 to 1-3/8 Inch Step Drill Bit Straight Grooved Double Fluted, M2 High Speed Steel Drill bits for Hole Drilling in Stainless Steel, Copper, Aluminum, Wood, Plastic
Asin: B094VN88HK | Model: STG1-3/8 | PartNumber: STG1-3/8
[Easier | Faster | Cleaner]: With Our High-Accuracy Cnc Processing And Several Optimized Design Details Over The Years, Our Design Cuts Easy, Fast And Clean, Outperforming The Average Ones On The Market..
[Multi Hole Sizes]: No Need To Buy A Kit. This One Step Bit Comes With 6 Marked Sizes So You Can Drill 6 Different Hole Sizes, Saving You Time And Effort To Change Bits. Marked Sizes Including: 1/4", 7/8", 1-1/8", 1-7/32", 1-1/4", 1-3/8"..
[Heavy Duty]: Cuts Holes On Stainless Steel, Hardened Metal, Mild Steel, Galvanized Steel, Aluminum, Copper, Plastic, Wood, Or Anything That Has Similar Or Lower Hardness As These Materials. Up To 12Ga /2.7Mm Thickness For Stainless Steel..
[Non-Stop]: Our Polished Steps And Size Highlights Let You Able To See Target Hole Size During Drilling. No Need To Stop In The Middle Of The Drilling And Check. Save You Time And Hassle..
Features
- [M2 HSS]: Cuts A LOT MORE CLEAN holes and much EASIER than average step bits. In general, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving durability. Our additional Vacuum heat treatment and Nitride surface hardening treatment make the performance even better.
- [Non-stop]: Our Polished Steps and Size Highlights let you able to see target hole size during drilling. No need to stop in the middle of the drilling and check. Save you time and hassle.
- [Easier | Faster | Cleaner]: With our high-accuracy CNC processing and several optimized design details over the years, our design cuts EASY, FAST and CLEAN, outperforming the average ones on the market.
- [Heavy duty]: Cuts holes on Stainless steel, Hardened Metal, Mild steel, Galvanized steel, Aluminum, Copper, Plastic, Wood, or anything that has similar or lower hardness as these materials. Up to 12ga /2.7mm thickness for Stainless steel.
- [Multi Hole Sizes]: No need to buy a kit. This one step bit comes with 6 marked sizes so you can drill 6 different hole sizes, saving you time and effort to change bits. Marked sizes including: 1/4, 7/8, 1-1/8, 1-7/32, 1-1/4, 1-3/8.
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
Dimensions: 3.55 x 1.38 x 1.38 inches | Weight: 0.10 pounds
See On Amazon #2
Jerax tools Tungsten Carbide Deburring Chamfer Tool Drill Bit 1/4" to 3/4", Remove Burr, Repair Tools for Damaged Metal Steel Screws, Bolts and Fasteners, Quick Release Hexagon Shank
Asin: B09SL8P3X5 | Model: JT-WDJQ | PartNumber: JT-WDJQ
[How To Use]: Put The Bit Over The Screws/Bolts First, Start With The Lowest Speed, Slightly Apply Pressure To Remove The Burr And Increase The Speed As Needed. Do Not Turn On The Driver Until The Bit Fully Covers The Screw/Bolt. Otherwise, The Bit Would Bump Over The Screws/Bolts And Become Hard To Control..
[Size]: Fits 1/4" Up To 3/4″ (6Mm -19Mm) Fasteners. Quick Change 1/4" Shank..
[Wide Application]: Effective For Hardened Steel, Mild Steel, Copper, Brass, Wood, Fiberglass And Hard Plastic. Can Be Used On Some Stainless Steel Scews/Bolts But Need To Be Cautious. If There Are Noises That Sounds Like Too Difficult, Then Quit Doing That..
[Chamfer]: Easily Shaves Down The Outer Edges Of A Screw/Bolt/Pipe/Rod And Remove The Burr. Quickly Repairs Damaged Bolts And Tightens The Nuts In Place Without Hurting Your Hand. No Sparks, And No Burns. Simplifies The Repair Process..
Features
- [Tungsten Carbide blade]: Carbide is a much more superior material than the HSS material that other similar products use. Carbide tools resist abrasion very well. They can also withstand much higher temperatures than steel. Tools with carbide tips maintain a sharper cutting edge better than steel tools. And they generally produce a better finish when cutting, providing a cleaner and smoother cut. In short, Carbide tools cut cleaner, faster and last longer.
- [Chamfer]: Easily shaves down the outer edges of a screw/bolt/pipe/rod and remove the burr. Quickly repairs damaged bolts and tightens the nuts in place without hurting your hand. No sparks, and no burns. Simplifies the repair process.
- [How to use]: Put the bit over the screws/bolts first, Start with the lowest speed, slightly Apply pressure to remove the burr and Increase the speed as needed. Do not turn on the driver until the bit fully covers the screw/bolt. Otherwise, the bit would bump over the screws/bolts and become hard to control.
- [Wide Application]: Effective for hardened steel, mild steel, copper, brass, wood, fiberglass and hard plastic. Can be used on some stainless steel scews/bolts but need to be cautious. If there are noises that sounds like too difficult, then quit doing that.
- [Size]: Fits 1/4 up to 3/4 (6mm -19mm) fasteners. Quick change 1/4 shank.
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
Dimensions: 2.30 x 0.90 x 0.90 Inches | Weight: 0.01 pounds
See On Amazon #3
Jerax tools 2 Inch High Speed Steel Step Drill bits, Doubles Flutes Large Step Bits for Hole Drilling in Iron, Copper, Aluminum, Wood, Plastic
Asin: B0BKGBXH35
[Non-Stop]: Our Polished Steps And Size Highlights Let You Able To See Target Hole Size During Drilling. No Need To Stop In The Middle Of The Drilling And Check. Save You Time And Hassle..
[Know More About Us]Jearx Tools Is A Professional Step Bits Manufacturer And All Our Step Drill Bits Are All Made Of Hss. We Also Provide The High Grade & Top Grade Step Bits For Stainless Steel & Other Thick Material. Visit Our Store To Know More Tools!.
[Multi Hole Sizes]: This 2" Step Bit Comes With 10 Marked Sizes So You Can Drill 6 Different Hole Sizes, Saving You Time And Effort To Change Bits. Marked Sizes Including: 1/4", 3/8", 19/32", 3/4", 1", 1-3/16", 1-3/8"1-5/8", 1-3/4", 2"..
[No Pilot Hole Required] Self-Starting & Non-Walking Spilt Point Tip Design Helps You Start Drilling Quickly..
Features
- Made of High Speed Steel] Premium material and surface treatment ensures the durability and sharpness. This unibit can drill holes on Iron, Aluminum, Copper, Plastic, Wood, or anything that has similar or lower hardness as these materials.
- [No Pilot Hole Required] Self-starting & non-walking spilt point tip design helps you start drilling quickly.
- [Non-stop]: Our Polished Steps and Size Highlights let you able to see target hole size during drilling. No need to stop in the middle of the drilling and check. Save you time and hassle.
- [Multi Hole Sizes]: This 2 step bit comes with 10 marked sizes so you can drill 6 different hole sizes, saving you time and effort to change bits. Marked sizes including: 1/4, 3/8, 19/32, 3/4, 1, 1-3/16, 1-3/81-5/8, 1-3/4, 2.
- [Know More About Us]Jearx tools is a professional step bits manufacturer and all our step drill bits are all made of HSS. We also provide the high grade & top grade step bits for stainless steel & other thick material. Visit our store to know more tools!
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
Dimensions: 4.00 x 2.00 x 2.00 Inches
See On Amazon #4
Jerax tools Quick Change Step Drill Bit Double Fluted M2 High Speed Steel Drill bits for Hole Drilling in Stainless Steel, Copper, Aluminum, Wood, Plastic (7/8")
Asin: B0B3WRR6CT | Model: JTQSD003 | PartNumber: JTQSD003
[Easy & Fast]: With Our High-Accuracy Cnc Processing And Several Optimized Design Details Over The Years, Our Design Cuts Easy, Fast And Clean, Outperforming The Average Ones On The Market. Comes With Quick Change 1/4 Inch Hex Shank For Quick Bit Switches And Compatible With Impact Ready Power Tools..
[Multi Hole Sizes]: No Need To Buy A Kit. This One Step Bit Comes With 9 Marked Sizes So You Can Drill 9 Different Hole Sizes, Saving You Time And Efforts To Change Bits. Marked Sizes Including: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"..
[Heavy Duty]: Cuts Holes On Stainless Steel, Hardened Metal, Mild Steel, Galvanized Steel, Aluminum, Copper, Plastic, Wood, Or Anything That Has Similar Or Lower Hardness As These Materials. Up To 12Ga /2.7Mm Thickness For Stainless Steel..
[Non-Stop]: Our Polished Steps And Size Highlights Make It Possible For You To See Target Hole Size During Drilling. No Need To Stop In The Middle Of The Drilling To Check. Save You Time And Hassle..
Features
- [M2 HSS]: Cuts A LOT MORE CLEAN holes and much EASIER than average step bits. In general, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving the durability. Our additional Vacuum heat treatment and Nitride surface hardening treatment make the performance even better.
- [Non-stop]: Our Polished Steps and Size Highlights make it possible for you to see target hole size during drilling. No need to stop in the middle of the drilling to check. Save you time and hassle.
- [Easy & Fast]: With our high-accuracy CNC processing and several optimized design details over the years, our design cuts EASY, FAST and CLEAN, outperforming the average ones on the market. Comes with Quick change 1/4 inch hex shank for quick bit switches and compatible with impact ready power tools.
- [Heavy duty]: Cuts holes on Stainless steel, Hardened Metal, Mild steel, Galvanized steel, Aluminum, Copper, Plastic, Wood, or anything that has similar or lower hardness as these materials. Up to 12ga /2.7mm thickness for Stainless steel.
- [Multi Hole Sizes]: No need to buy a kit. This one step bit comes with 9 marked sizes so you can drill 9 different hole sizes, saving you time and efforts to change bits. Marked sizes including: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4.
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
Dimensions: 3.60 x 0.70 x 0.70 inches
See On Amazon #5
Jerax tools M35 HSS 3/8 Inch Step Drill Bit, Single Size Unibit with Double Spiral Flutesfor Drilling Small Holes on Stainless Steel, Metal, Wood, Plastic
Asin: B0CG5B296V
[Fast Cutting]: 2 Spiral Flutes Provide Super Fast, Smooth And Clean Cutting. Check Our Drilling Video To Know How Fast It Is!.
[Heavy Duty]: Durable M35 High Speed Steel Material Ensures Excellent Durability And Sharpness. Jerax Tools M35 Step Bits Can Cut Holes On Stainless Steel, Hardened Metal, Mild Steel, Galvanized Steel, Aluminum, Iron, Copper, Plastic, Wood, Or Anything That Has Similar Or Lower Hardness As These Materials..
[Selt-Strating & Non-Stop]: Our Polished Steps And Size Highlights Let You Able To See Target Hole Size During Drilling. No Need To Stop In The Middle Of The Drilling And Check. Save You Time And Hassle..
[More Holes]: Top Grade M35 High Speed Steel Material Ensures A Lot More Clean Holes And Much Easier Than Average Unibits. Additional Vacuum Heat Treatment And Nitride Surface Hardening Treatment Make The Performance Even Better..
Features
- [LESS Time] Jerax tools Single Size 3/8" Step Bits is specially designed for QUICK drilling 3/8" holes. Unique incremental head design allows quick and fast start of drilling. Make your drilling work more easier and save your time!
- [MORE Holes]: TOP GRADE M35 high speed steel material ensures A LOT MORE CLEAN holes and much easier than average unibits. Additional Vacuum heat treatment and Nitride surface hardening treatment make the performance even better.
- [FAST Cutting]: 2 spiral flutes provide super fast, smooth and clean cutting. Check our drilling video to know how fast it is!
- [Selt-strating & Non-stop]: Our Polished Steps and Size Highlights let you able to see target hole size during drilling. No need to stop in the middle of the drilling and check. Save you time and hassle.
- [Heavy Duty]: Durable M35 high speed steel material ensures excellent durability and sharpness. Jerax tools M35 step bits can cut holes on Stainless steel, Hardened Metal, Mild steel, Galvanized steel, Aluminum, Iron, Copper, Plastic, Wood, or anything that has similar or lower hardness as these materials.
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
See On Amazon #6
Jerax tools Heavy Duty M35 HSS 1-1/8 Inch Step Drill Bit with Four Flutes, 1/4" Quich Change Shank High Speed Steel Step Bit for Stainless Steel, Metal, Wood
Asin: B0CG9C7YVH
[Incremental Head Deisgn]: Designed For Drilling Holes On Thick Materials Like Carbon Steel, Copper, Alumiunm, And Similar Hardness Materials. Not Suitable For Stainless Steel Above 12 Gauge..
[Multi Hole Sizes]: One Bit For Several Sizes. No Need To Buy A Kit..
[Non-Stop]: Our Polished Steps And Size Highlights Let You Able To See Target Hole Size During Drilling. No Need To Stop In The Middle Of The Drilling And Check. Save You Time And Hassle..
[Easier | Faster | Cleaner]: 4 Spiral Flutes Provide Super Fast, Smooth And Clean Cutting. With Our High-Accuracy Cnc Processing And Several Optimized Design Details Over The Years, Our Design Cuts Easy, Fast And Clean, Outperforming The Average Ones On The Market..
Features
- [M35 HSS]: Made of TOP GRADE M35 high speed steel. Durable M35 high speed steel material ensures excellent durability and sharpness. Cuts A LOT MORE CLEAN holes and much EASIER than average step bits. Our additional Vacuum heat treatment and Nitride surface hardening treatment make the performance even better.
- [Easier | Faster | Cleaner]: 4 spiral flutes provide super fast, smooth and clean cutting. With our high-accuracy CNC processing and several optimized design details over the years, our design cuts EASY, FAST and CLEAN, outperforming the average ones on the market.
- [Incremental Head Deisgn]: Designed for drilling holes on thick materials like carbon steel, copper, alumiunm, and similar hardness materials. NOT suitable for stainless steel above 12 gauge.
- [Non-stop]: Our Polished Steps and Size Highlights let you able to see target hole size during drilling. No need to stop in the middle of the drilling and check. Save you time and hassle.
- [Multi Hole Sizes]: One bit for several sizes. No need to buy a kit.
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
See On Amazon #7
M2 HSS Taper Chucking Reamer 4pcs Set, 3/8", 1/2", 5/8", 3/4", Fit 3/8" or 1/2" Shank Chuck, Spiral Flute, Bridge/Construction Reamer for Steel, Alloy, Aluminum, Wood, Plastic
Asin: B09CTDQ8BN
[Tapered Point]: Allow Entry Into Overlapping Holes..
[Sizes]: 4 Pieces, Including 3/8" (Fit 3/8'' Shank Chuck), 1/2", 5/8" And 3/4" (Fit 1/2'' Shank Chuck)..
[Application]: Enlarge Or Align Existing Holes Through Mild Steel, Alloys, Aluminum, Wood, Plastic, Fiberglass Or Any Similar Hardness Material Prior To Rivet Or Bolt Installation. Commonly Used In Bridge, Construction, Steel Erection/Fabrication, And Automotive (Truck & Trailer) Industries. Up To 3/8"(10Mm) Thick Mild Steel For Impact Driver Or 1" (25Mm) Thick For Magnetic Drill Press. Notice: It Requires Existing Hole Or A Pilot Hole Would Be Needed..
[Spiral Flutes & Safety Stop]: Left Helix/Right Hand Cut Sheers Chips Away From Operator. Safety Collar Stop To Prevent Over Penetration And Operator Loss Of Stability..
Features
- [M2 HSS material]: Compared to other commonly used lower grade HSS, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving the durability.
- [Spiral Flutes & Safety stop]: Left Helix/Right Hand Cut sheers chips away from operator. Safety collar stop to prevent over penetration and operator loss of stability.
- [Tapered point]: allow entry into overlapping holes.
- [Application]: enlarge or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass or any similar hardness material prior to rivet or bolt installation. Commonly used in bridge, construction, steel erection/fabrication, and automotive (truck & trailer) industries. Up to 3/8(10mm) thick mild steel for impact driver or 1 (25mm) thick for Magnetic drill press. Notice: it requires existing hole or a pilot hole would be needed.
- [Sizes]: 4 pieces, including 3/8 (fit 3/8'' shank chuck), 1/2, 5/8 and 3/4 (fit 1/2'' shank chuck).
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
Weight: 1.00 Pounds
See On Amazon #8
Jerax tools Tungsten Carbide Tipped Hole Cutter, 7/8 inch TCT Hole Saw with 5mm Hole Depth Heavy Duty for Stainless Steel, Mild Steel, Iron, Copper, Brass, Plastic
Asin: B0BKPRDZ76
[Smooth Cutting]: Split Pilot Drill Bit Prevents Bit Walking And Damage To The Cutter. The Double Helix Grooves Design Of The Bit Ensures A Faster Start. The Innovative Ejector Spring Makes The Slug To Remove Easily..
[Operation Tips]: Always Keep The Hole Cutter Flat On The Sheet Metal. Please Use The Recommended Rpm For Extending The Service Life..
[Wide Application]: Perfect For Drilling On Hard Metal, Such As Stainless, Iron, Copper, Aluminum, And Plastic; Note: Can Not Be Used For Drilling On Concrete, Tiles, And Stone..
[Proved Design]: Precision Ground Teeth Ensures A Fast Cutting, And A Clean & Round Hole. Safety Stopper Prevents The Operator From Drilling Beyond The Sheet Metal..
Features
- [Tungsten Carbide]: Carbide tipped blade has great hardness, good wear resistance, sharp cutting edge, and long service life. Carbide tipped hole cutter can last 10X Long Life over a standard bi-metal hole saw.
- [Proved Design]: Precision ground teeth ensures a fast cutting, and a clean & round hole. Safety stopper prevents the operator from drilling beyond the sheet metal.
- [Smooth Cutting]: Split pilot drill bit prevents bit walking and damage to the cutter. The double helix grooves design of the bit ensures a faster start. The innovative ejector spring makes the slug to remove easily.
- [Wide Application]: Perfect for drilling on hard metal, such as stainless, iron, copper, aluminum, and plastic; Note: CAN NOT be used for drilling on concrete, tiles, and stone.
- [Operation Tips]: Always keep the hole cutter flat on the sheet metal. Please use the recommended RPM for extending the service life.
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
Dimensions: 0.13 x 3.69 x 0.13 Inches
See On Amazon #9
Jerax tools R8 Shank Indexable 2" End Mill, 2" Diameter 90 Degree High Speed Milling Cutter with Replaceable Carbide Insert
Asin: B0BKRR3HP5
[Professional Design]: 5 Flutes And Positive Rake 90 Degree Cutting Angle Reduce Insert Loss And Saves Processing Costs, Which Helps You Complete Your Work Quickly..
[Main Size]: Shank Size: R8 Thread: 7/16"-20 Cutting Angle: 90° Overall Length: 6-1/8" No. Of Insert: 5.
[Easy Assembling]: The Screw-Down Clamping System Makes The Assembling Easier..
[Wide Application]: Designed To Cut Materials Ranging From Low Carbon Steel, Medium Carbon Steel, High Carbon Steel (Hrb170-270) And Stainless Steel, Also Suitable For Aluminium Alloy, Brass, And Rigid Plastic Parts Processing..
Features
- [Tungsten Carbide Insert]: Carbide tipped blade has great hardness, good wear resistance, sharp cutting edge, and long service life.
- [Wide Application]: Designed to cut materials ranging from low carbon steel, medium carbon steel, high carbon steel (HRB170-270) and stainless steel, also suitable for aluminium alloy, brass, and rigid plastic parts processing.
- [Professional Design]: 5 Flutes and Positive rake 90 Degree cutting angle reduce insert loss and saves processing costs, which helps you complete your work quickly.
- [Easy Assembling]: The screw-down clamping system makes the assembling easier.
- [Main Size]: Shank size: R8 Thread: 7/16-20 Cutting angle: 90 Overall length: 6-1/8 No. of insert: 5
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
See On Amazon #10
Jerax tools M35 HSS 1/2" Taper Chucking Reamer for enlarging existing Holes, Fit 1/2" Shank Chuck, Spiral Flute, Bridge/Construction Reamer for Steel, Alloy, Aluminum, Wood, Plastic
Asin: B0CNTC5MXJ
[Tapered Point]: Allow Entry Into Overlapping Holes..
[Sizes]: 4 Sizes For Choosing. 3/8" (Fit 3/8'' Shank Chuck), 1/2", 5/8" And 3/4" (Fit 1/2'' Shank Chuck)..
[Application]: Enlarge Or Align Existing Holes Through Mild Steel, Alloys, Aluminum, Wood, Plastic, Fiberglass Or Any Similar Hardness Material Prior To Rivet Or Bolt Installation. Commonly Used In Bridge, Construction, Steel Erection/Fabrication, And Automotive (Truck & Trailer) Industries. Up To 3/8"(10Mm) Thick Mild Steel For Impact Driver Or 1" (25Mm) Thick For Magnetic Drill Press. Notice: It Requires Existing Hole Or A Pilot Hole Would Be Needed..
[Spiral Flutes & Safety Stop]: Left Helix/Right Hand Cut Sheers Chips Away From Operator. Safety Collar Stop To Prevent Over Penetration And Operator Loss Of Stability..
Features
- [M35 HSS material]: Made of top grade M35 High Speed Steel. STRONGER and MORE DURABLE than M2 HSS.
- [Spiral Flutes & Safety stop]: Left Helix/Right Hand Cut sheers chips away from operator. Safety collar stop to prevent over penetration and operator loss of stability.
- [Tapered point]: Allow entry into overlapping holes.
- [Application]: Enlarge or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass or any similar hardness material prior to rivet or bolt installation. Commonly used in bridge, construction, steel erection/fabrication, and automotive (truck & trailer) industries. Up to 3/8(10mm) thick mild steel for impact driver or 1 (25mm) thick for Magnetic drill press. Notice: it requires existing hole or a pilot hole would be needed.
- [Sizes]: 4 sizes for choosing. 3/8 (fit 3/8'' shank chuck), 1/2, 5/8 and 3/4 (fit 1/2'' shank chuck).
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
See On Amazon #11
Jerax tools Carbide Cutting Burr Set 1/4 Inch Shank 10pcs Cutting Burr Rotary Files Set with Plastic Case Metal Wood Stone Hole Deburr Contouring Surface Milling Cleaning Grinding Engraving
Asin: B0CRGV2N4B
[Size]: 1/4" Shank Compatible With Most Rotary Tools And Grinders For Convenience..
[Durability]: Made Of Heat-Treated Carbide For Long-Lasting Sharpness And Durability, Increasing Productivity..
[Material]: The Double Cut Carbide Rotary Burr Set Is Suitable For Hard Materials Like Ferrous Metals, Wood, Jade, Marble, And More..
[Applications]: Ideal For Metal Polishing, Engraving, Wood Carving, And Power Tools Such As Grinder Tool And Die Grinder Bits.
Features
- [Shape]: 10pcs carbide grinding bit sets includes SA-1, SA-3, SC-1, SC-3, SD-2, SD-3, SE-3, SF-3, SF-5, SL-1 for versatile applications.
- [Applications]: Ideal for metal polishing, engraving, wood carving, and power tools such as grinder tool and die grinder bits
- [Size]: 1/4 shank compatible with most rotary tools and grinders for convenience.
- [Material]: The double cut carbide rotary burr set is suitable for hard materials like ferrous metals, wood, jade, marble, and more.
- [Durability]: Made of heat-treated carbide for long-lasting sharpness and durability, increasing productivity.
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
Dimensions: 1.00 x 1.00 x 1.00 Inches
See On Amazon #12
M35 HSS 1/2'' 3/4'' 3/8'' 5/8" Taper Chucking Reamer for Enlarging Existing Holes, Fit 1/2" Shank Chuck, Spiral Flute, Bridge/Construction Reamer for Steel, Alloy, Aluminum, Wood, Plastic
Asin: B0C52QKDMY
[Tapered Point]: Allow Entry Into Overlapping Holes..
[Sizes]: 4 Pieces, Including 3/8" (Fit 3/8'' Shank Chuck), 1/2", 5/8" And 3/4" (Fit 1/2'' Shank Chuck)..
[Application]: Enlarge Or Align Existing Holes Through Mild Steel, Alloys, Aluminum, Wood, Plastic, Fiberglass Or Any Similar Hardness Material Prior To Rivet Or Bolt Installation. Commonly Used In Bridge, Construction, Steel Erection/Fabrication, And Automotive (Truck & Trailer) Industries. Up To 3/8"(10Mm) Thick Mild Steel For Impact Driver Or 1" (25Mm) Thick For Magnetic Drill Press. Notice: It Requires Existing Hole Or A Pilot Hole Would Be Needed..
[Spiral Flutes & Safety Stop]: Left Helix/Right Hand Cut Sheers Chips Away From Operator. Safety Collar Stop To Prevent Over Penetration And Operator Loss Of Stability..
Features
- [M35 HSS material]: Made of top grade M35 High Speed Steel. STRONGER and MORE DURABLE than M2 HSS.
- [Spiral Flutes & Safety stop]: Left Helix/Right Hand Cut sheers chips away from operator. Safety collar stop to prevent over penetration and operator loss of stability.
- [Tapered point]: allow entry into overlapping holes.
- [Application]: enlarge or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass or any similar hardness material prior to rivet or bolt installation. Commonly used in bridge, construction, steel erection/fabrication, and automotive (truck & trailer) industries. Up to 3/8(10mm) thick mild steel for impact driver or 1 (25mm) thick for Magnetic drill press. Notice: it requires existing hole or a pilot hole would be needed.
- [Sizes]: 4 pieces, including 3/8 (fit 3/8'' shank chuck), 1/2, 5/8 and 3/4 (fit 1/2'' shank chuck).
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
See On Amazon #13
Jerax tools M35 HSS 3/8" Taper Chucking Reamer for Enlarging Existing Holes, Fit 3/8" Shank Chuck, Spiral Flute, Bridge/Construction Reamer for Steel, Alloy, Aluminum, Wood, Plastic
Asin: B0CNTFC6L7
[Tapered Point]: Allow Entry Into Overlapping Holes..
[Sizes]: 4 Sizes For Choosing. 3/8" (Fit 3/8'' Shank Chuck), 1/2", 5/8" And 3/4" (Fit 1/2'' Shank Chuck)..
[Application]: Enlarge Or Align Existing Holes Through Mild Steel, Alloys, Aluminum, Wood, Plastic, Fiberglass Or Any Similar Hardness Material Prior To Rivet Or Bolt Installation. Commonly Used In Bridge, Construction, Steel Erection/Fabrication, And Automotive (Truck & Trailer) Industries. Up To 3/8"(10Mm) Thick Mild Steel For Impact Driver Or 1" (25Mm) Thick For Magnetic Drill Press. Notice: It Requires Existing Hole Or A Pilot Hole Would Be Needed..
[Spiral Flutes & Safety Stop]: Left Helix/Right Hand Cut Sheers Chips Away From Operator. Safety Collar Stop To Prevent Over Penetration And Operator Loss Of Stability..
Features
- [M35 HSS material]: Made of top grade M35 High Speed Steel. STRONGER and MORE DURABLE than M2 HSS.
- [Spiral Flutes & Safety stop]: Left Helix/Right Hand Cut sheers chips away from operator. Safety collar stop to prevent over penetration and operator loss of stability.
- [Tapered point]: Allow entry into overlapping holes.
- [Application]: Enlarge or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass or any similar hardness material prior to rivet or bolt installation. Commonly used in bridge, construction, steel erection/fabrication, and automotive (truck & trailer) industries. Up to 3/8(10mm) thick mild steel for impact driver or 1 (25mm) thick for Magnetic drill press. Notice: it requires existing hole or a pilot hole would be needed.
- [Sizes]: 4 sizes for choosing. 3/8 (fit 3/8'' shank chuck), 1/2, 5/8 and 3/4 (fit 1/2'' shank chuck).
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
See On Amazon #14
Jerax tools Oal 5 Pc Indexable Turning Tool Set with TCMT Carbide Inserts (3/8")
Asin: B0BDGQ596B | Model: JTITI | PartNumber: JTITI
[Clear Markings]: Easy Reference Guides For Insert Number, Screw, And Other Accessories Are Laser Marked On The Tool Shank..
[Extra Inserts]: Each Set Includes 5Pcs Holders With Inserts, 2Pcs Extra Inserts, 5Pcs Extra Screws, And 1Pc Torx Key..
[Meet Multiple Needs]: Normally Used For Threading, Boring, Cutoff, Parting, Part-Off, Finish Turning, Facing, Chamfering, External Grooving, Etc..
[Replaceable Insert]: Reduce The Tool Grinding Cost And Improve The Cutting Efficiency..
Features
- [Tungsten Carbide Material]: Great hardness, good wear resistance, sharp cutting edge, and long service life.
- [Replaceable Insert]: Reduce the tool grinding cost and improve the cutting efficiency.
- [Clear Markings]: Easy reference guides for insert number, screw, and other accessories are laser marked on the tool shank.
- [Meet Multiple Needs]: Normally used for threading, boring, cutoff, parting, part-off, finish turning, facing, chamfering, external grooving, etc.
- [Extra Inserts]: Each set includes 5pcs holders with inserts, 2pcs extra inserts, 5pcs extra screws, and 1pc Torx key.
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
See On Amazon #15
Jerax tools M35 HSS 5/8" Taper Chucking Reamer for Enlarging Existing Holes, Fit 1/2" Shank Chuck, Spiral Flute, Bridge/Construction Reamer for Steel, Alloy, Aluminum, Wood, Plastic
Asin: B0CNTG2XLT
[Tapered Point]: Allow Entry Into Overlapping Holes..
[Sizes]: 4 Sizes For Choosing. 3/8" (Fit 3/8'' Shank Chuck), 1/2", 5/8" And 3/4" (Fit 1/2'' Shank Chuck)..
[Application]: Enlarge Or Align Existing Holes Through Mild Steel, Alloys, Aluminum, Wood, Plastic, Fiberglass Or Any Similar Hardness Material Prior To Rivet Or Bolt Installation. Commonly Used In Bridge, Construction, Steel Erection/Fabrication, And Automotive (Truck & Trailer) Industries. Up To 3/8"(10Mm) Thick Mild Steel For Impact Driver Or 1" (25Mm) Thick For Magnetic Drill Press. Notice: It Requires Existing Hole Or A Pilot Hole Would Be Needed..
[Spiral Flutes & Safety Stop]: Left Helix/Right Hand Cut Sheers Chips Away From Operator. Safety Collar Stop To Prevent Over Penetration And Operator Loss Of Stability..
Features
- [M35 HSS material]: Made of top grade M35 High Speed Steel. STRONGER and MORE DURABLE than M2 HSS.
- [Spiral Flutes & Safety stop]: Left Helix/Right Hand Cut sheers chips away from operator. Safety collar stop to prevent over penetration and operator loss of stability.
- [Tapered point]: Allow entry into overlapping holes.
- [Application]: Enlarge or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass or any similar hardness material prior to rivet or bolt installation. Commonly used in bridge, construction, steel erection/fabrication, and automotive (truck & trailer) industries. Up to 3/8(10mm) thick mild steel for impact driver or 1 (25mm) thick for Magnetic drill press. Notice: it requires existing hole or a pilot hole would be needed.
- [Sizes]: 4 sizes for choosing. 3/8 (fit 3/8'' shank chuck), 1/2, 5/8 and 3/4 (fit 1/2'' shank chuck).
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
See On Amazon #16
Jerax tools M35 HSS 3/4" Taper Chucking Reamer for Enlarging Existing Holes, Fit 1/2" Shank Chuck, Spiral Flute, Bridge/Construction Reamer for Steel, Alloy, Aluminum, Wood, Plastic
Asin: B0CNTFCFVF
[Tapered Point]: Allow Entry Into Overlapping Holes..
[Sizes]: 4 Sizes For Choosing. 3/8" (Fit 3/8'' Shank Chuck), 1/2", 5/8" And 3/4" (Fit 1/2'' Shank Chuck)..
[Application]: Enlarge Or Align Existing Holes Through Mild Steel, Alloys, Aluminum, Wood, Plastic, Fiberglass Or Any Similar Hardness Material Prior To Rivet Or Bolt Installation. Commonly Used In Bridge, Construction, Steel Erection/Fabrication, And Automotive (Truck & Trailer) Industries. Up To 3/8"(10Mm) Thick Mild Steel For Impact Driver Or 1" (25Mm) Thick For Magnetic Drill Press. Notice: It Requires Existing Hole Or A Pilot Hole Would Be Needed..
[Spiral Flutes & Safety Stop]: Left Helix/Right Hand Cut Sheers Chips Away From Operator. Safety Collar Stop To Prevent Over Penetration And Operator Loss Of Stability..
Features
- [M35 HSS material]: Made of top grade M35 High Speed Steel. STRONGER and MORE DURABLE than M2 HSS.
- [Spiral Flutes & Safety stop]: Left Helix/Right Hand Cut sheers chips away from operator. Safety collar stop to prevent over penetration and operator loss of stability.
- [Tapered point]: Allow entry into overlapping holes.
- [Application]: Enlarge or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass or any similar hardness material prior to rivet or bolt installation. Commonly used in bridge, construction, steel erection/fabrication, and automotive (truck & trailer) industries. Up to 3/8(10mm) thick mild steel for impact driver or 1 (25mm) thick for Magnetic drill press. Notice: it requires existing hole or a pilot hole would be needed.
- [Sizes]: 4 sizes for choosing. 3/8 (fit 3/8'' shank chuck), 1/2, 5/8 and 3/4 (fit 1/2'' shank chuck).
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
See On Amazon