Onyehn - Buying Guide
Last Updated: 04/28/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Onyehn 60pcs 6 Sizes 3D Printer Nozzle Cleaning Kit(0.15mm 0.2mm 0.25mm 0.3mm 0.35mm 0.4mm Stainles Steel Nozzle Cleaning Needles) for MK8,V6,MK10 Extruder Nozzles
Asin: B0B8CJLWWB | Model: Nozzle Cleaning Kit | PartNumber: Nozzle Cleaning Kit | Ean: 0768461165354 | UPC: 768461165354
Durable To Use: Made Of Stainless Steel, Easy To Bend, But Hard To Break, Can Be Kept And Applied For A Long Time..
Handle Design: Comes With A Handle, So You Can Easily Twist It In During Use.
Wide Suitable: Compatible With Most Of 3D Printers On The Market..
Multiple Sizes: 60 Pcs Of 3D Printer Nozzle Tools(10 Each Of 6 Sizes), 0.15 Mm, 0.2 Mm, 0.25 Mm, 0.3 Mm 0.35 Mm And 0.4 Mm,10 Pcs In Each Storage Bottle, Suitable For Nozzle In Most Sizes(There May Be A Difference Between The Size Of The Cleaning Needle And The Size Of The Nozzle, And The Size Is Subject To Actual Use.).
Features
- Note: The nozzle cleaning needles tip are sharp,please store this cleaning needle carefully and keep them away from children. Be careful during use to avoid injury.
- Multiple sizes: 60 pcs of 3D printer nozzle tools(10 each of 6 sizes), 0.15 mm, 0.2 mm, 0.25 mm, 0.3 mm 0.35 mm and 0.4 mm,10 pcs in each storage bottle, suitable for nozzle in most sizes(There may be a difference between the size of the cleaning needle and the size of the nozzle, and the size is subject to actual use.)
- Durable to use: made of stainless steel, easy to bend, but hard to break, can be kept and applied for a long time.
- Wide suitable: compatible with most of 3D printers on the market.
- Handle Design: Comes with a handle, so you can easily twist it in during use
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
Dimensions: 0.39 x 7.87 x 5.91 Inches
See On Amazon #2
Onyehn 100pcs Sealing O Ring Kit Replacement Rubber Gasket Seals for A/C Refrigeration Charging Hose A/C 1/4" Thread Charging Hose/Manifold Auto Repair Tool
Asin: B07ZQ5S85T | Model: Sealing O-ring | PartNumber: Sealing O-ring | Ean: 8414763964066
For Automotive A/C Ac Hvac O-Ring Seal Kit O-Rings Seals Rubber Rings..
Oil Resistant, Impact Resistant, And Freon Resistant..
Waterproof, Uv Resistant, And Corrosion Resistant..
Used For Standard 1/4" Flare A/C Refrigeration Charging Hose High Pressure Hvac Refrigerant Charging Hoses / Manifold Repair, Replacement Kit..
Features
- Air conditioning seal repair kit.Conical shape, you need to use the larger diameter end to connect correctly
- Used for Standard 1/4 Flare A/C Refrigeration Charging Hose High Pressure HVAC Refrigerant Charging Hoses / manifold repair, replacement kit.
- For Automotive A/C AC HVAC O-ring seal kit O-rings seals rubber rings.
- Waterproof, UV resistant, and corrosion resistant.
- Oil resistant, impact resistant, and freon resistant.
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
See On Amazon #3
Onyehn 2pcs 12V-36V DC Voltage Protection Module Digital Low Voltage Protector Disconnect Switch Over Discharge Protection Module
Asin: B07QNXM4LS | Model: XH-M609 | PartNumber: XH-M609 | Ean: 8431276576012
On-Board Momentary Push Button To Set The Low Voltage Disconnect Parameter And 3 Digit Red Led Display The Parameter Easy To Operation.When The Battery Voltage Reach The Setting Values, The Module Will Disconnect Load Automatically To Aviod The Battery From Over Discharging To Prolong The Battery Lifetime. (Note:The Relay Does Not Contain A Power Cut-Off Switch,Remember To Cut Off The Power Supply After Disconnection, Otherwise The Module Will Continue To Use The Battery Until The Voltage Is 0.).
Display Is Accurate, The Switch Module Is Quickly To Open And Close When Near Minimum Voltage; Settings Is Stored Non-Volatile, It Can Keep Set When Power Off.
Reset:When The Power Is Off, Press And Hold The Two Buttons At The Same Time, And Then Power On. At This Time, The Screen Displays "888", Indicating That The Factory Settings Are Restored.The Factory-Set Protection Value: 12V, Difference Value: 2V.Difference Value"Is The Value Between The Battery Voltage To Disconnect And The Battery Voltage To Reconnect..
Programmable Battery Low Voltage Disconnect Switch For Dc12-36V Lead Acid Battery And Lithium Ion Battery. It's A Protection Switch Module, Not Included Batteries Itself.Compatible Battery: Lead Acid, Lithium Ion Battery, Solar Panel Battery.Not Suitable For Battery Packs..
Features
- Board Size: 57 X 42 X 19mm/2.24 X 1.65 X 0.75inch(L*W*H), Input Voltage Range: DC12-36V, Control Accuracy: 0.1V, Power Consumption: <1.5W, Maximum Amperage before Breaker Trips: 20A.(Note:Due to the limitation of the size of the PCB board, the relay size of this module is mini and the circuit lines are very thin. The current should not be too large during actual use. If the current exceeds 8A, the relay contacts may be blown and cannot be used normally.) Package Included:2x Protection Module.
- Programmable battery low voltage disconnect switch for DC12-36V lead acid battery and lithium ion battery. It's a protection switch module, not included batteries itself.Compatible Battery: lead acid, lithium ion battery, solar panel battery.Not suitable for battery packs.
- On-board momentary push button to set the low voltage disconnect parameter and 3 digit red LED display the parameter easy to operation.When the battery voltage reach the setting values, the module will disconnect load automatically to aviod the battery from over discharging to prolong the battery lifetime. (Note:The relay does not contain a power cut-off switch,remember to cut off the power supply after disconnection, otherwise the module will continue to use the battery until the voltage is 0.)
- Reset:When the power is off, press and hold the two buttons at the same time, and then power on. At this time, the screen displays 888, indicating that the factory settings are restored.The factory-set protection value: 12V, difference value: 2V.Difference Valueis the value between the battery voltage to disconnect and the battery voltage to reconnect.
- Display is accurate, the switch module is quickly to open and close when near minimum voltage; Settings is stored non-volatile, it can keep set when power off
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
See On Amazon #4
Onyehn 15pcs/Set 2k3 Ohm Potentiometer Replacement for Dualsense PS5 Controller,Repair Part Trim Pot Resistor Module Sensor for ALPS Analog Joystick
Asin: B09WVMSS8P | Model: 15 | PartNumber: 15 | Ean: 0768484434437 | UPC: 768484434437
How To Use:Take Out The Board Separately, Pry Open The Potentiometer On The Side Of The Joystick, And Replace It With A New One..
Instructions Are Not Included.Please Replace This Part Under Professional Guide, If Not, No Try.
Package Include:15*2K3 Ohm 3 Pins Trimmer Potentiometer Sensor For Ps5.
What This Fixes: Stick Drift, Blind Spots, Creeping, Stuttering, Dead Zones, Non Centered Joysticks..
Features
- Required Ability:Needs moderate soldering. Instruction is not included, but it is not complicated.
- What this fixes: Stick drift, blind spots, creeping, stuttering, dead zones, non centered joysticks.
- How to use:Take out the board separately, pry open the potentiometer on the side of the joystick, and replace it with a new one.
- Package include:15*2k3 Ohm 3 Pins Trimmer Potentiometer Sensor for PS5
- Instructions are not included.Please Replace This Part Under Professional Guide, If Not, NO TRY
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
See On Amazon #5
Onyehn TRRS 3.5mm Audio Jack Breakout Headphone Video Audio MP3 Jack Module for Arduino (Pack of 8pcs)
Asin: B07L3P93ZD | Ean: 8011655415257
Mini Design, Portable And Easy To Use..
Lead To The Left Channel, Right Channel, Ground Wire, And The Lines Of The Plug..
This Breakout Board Makes It Easy To Add A Trrs Jack To Your Prototype Or Project By Breaking Out Each Conductor To A Standard 0.1" Spaced Header..
Size: 17 * 12Mm / 0.6 * 0.5 Inch.
Features
- Material: Plastic + metal
- Size: 17 * 12mm / 0.6 * 0.5 inch
- Mini design, portable and easy to use.
- This breakout board makes it easy to add a TRRS jack to your prototype or project by breaking out each conductor to a standard 0.1 spaced header.
- Lead to the left channel, right channel, ground wire, and the lines of the plug.
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
See On Amazon #6
Onyehn 5in1 Replacement Part ZL ZR L SL SR Button Key Ribbon Flex Cable for Nintendo Switch Joy Con Controller
Asin: B097D2P12K | Ean: 0719022162947 | UPC: 719022162947
Fix The Sr Button Flex Cable.
Fix The Joy-Con Zr Button Flex Cable..
Fix The Joy-Con Zl Button Flex Cable.
Replace Your Broken L Button Key Flex Cable;Fix The Left Joy-Con Sl Button Flex Cable.
Features
- Professional installation are highly recomended.
- Replace your broken L Button Key Flex cable;Fix the Left Joy-Con SL Button Flex Cable
- Fix the SR Button Flex Cable
- Fix the Joy-Con ZL Button Flex Cable
- Fix the Joy-Con ZR Button Flex Cable.
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
See On Amazon #7
Onyehn Console Cable RP2040 CPU Cable Chip for Nintendo Switch Lite,Upgradable Chip Replacement Parts for Switch NS Lite Console with Repair Tools
Asin: B0CT2NTP8J
Replacement Part: New Game Console Cable Can Be Used To Replace The Old Or Damaged Parts And Restore The Performance Of The Device..
With Repair Tools: It Comes With 1 X Metal Bit Driver, 2 X Precision Bits(1 X Phillips #00,1 X Tri-Point Y00), 1 X Metal Esd Tweezers, 1 X Metal Pry Bar, 1 X Plastic Pry Bar, 1 X Triangle Opening Tool, 1 X Brush. Professional Repair Tools Helps To Disassemble And Replace The Ns Switch Chip Replacement More Convenient..
Professional Installation: For Switch Lite Cpu Cable Requires Professional Solderers, Please Prepare The Tools In Advance And Ask For Professional Assistance For Installation,Otherwise The Chip Will Easy To Damaged..
Compatible Model: (Not For Nintendo Switch Or Switch Oled)This Cable Is Only Compatible With For Nintendo Switch Lite Hdh-001. Note:Please Make Sure Your Model Before Purchase..
Features
- NOTE: The chip NOT included the firmware, you need to flash by yourself.The pre-installed firmware chip doesn't need to be connected to USB, if you need, please connect the USB interface (UP) correctly, otherwise there has risk of chip burning.
- Compatible Model: (Not for Nintendo Switch or Switch OLED)This cable is only compatible with for Nintendo Switch Lite HDH-001. Note:Please make sure your model before purchase.
- Replacement Part: New game console cable can be used to replace the old or damaged parts and restore the performance of the device.
- Professional Installation: For Switch Lite cpu cable requires professional solderers, please prepare the tools in advance and ask for professional assistance for installation,otherwise the chip will easy to damaged.
- With Repair Tools: It comes with 1 x Metal Bit Driver, 2 x Precision Bits(1 x Phillips #00,1 x Tri-point Y00), 1 x Metal ESD Tweezers, 1 x Metal Pry Bar, 1 x Plastic Pry Bar, 1 x Triangle Opening Tool, 1 x Brush. Professional repair tools helps to disassemble and replace the NS Switch chip replacement more convenient.
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
Dimensions: 0.39 x 3.15 x 1.97 Inches
See On Amazon #8
Onyehn 10pcs 0-24V MOSFET Button IRF520 MOS Driver Module for Arduino MCU ARM Raspberry pi
Asin: B07GLNCRR4 | Ean: 8011533039872
By Pwm Adjustable Can Realize Stepless Dimming Led, Motor Stepless Speed Regulation.
Max Load (Drain) Current: <5A,Output Load Voltage :0-24V.
Platform For Arduino, Scm, Arm, Raspberry Pi.
Can Let The Arduino Drive Up To 24 V Load, Such As Led Lights Belt, Dc Motor, Micro Pump, Solenoid Valve.
Features
- Using original IRF520 power MOS tube, can adjust PWM output
- Can let the Arduino drive up to 24 v load, such as LED lights belt, dc motor, micro pump, solenoid valve
- By PWM adjustable can realize stepless dimming LED, motor stepless speed regulation
- Platform for Arduino, SCM, ARM, Raspberry Pi
- Max load (drain) current: <5A,Output load voltage :0-24V
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
See On Amazon #9
Onyehn XR2206 High Precision Function Signal Generator DIY Kit Sine/Triangle/Square Output 1Hz-1MHz Adjustable Frequency Amplitude + Transparent Case Box
Asin: B078X9PVX3 | Model: 209 | PartNumber: 209 | Ean: 7593064134482
Wide Power Supply Range, Use 9-12V External Power Or 9V Battery(Not Included)..
Triangle Wave: Amplitude: 0-3V At 9V Dc Input; Linearity: Less Than 1% (Up To 100 Khz) 10 Ma..
Sine Wave Parameters:Amplitude: 0-3V At 9V Dc Input; Distortion: Less Than 1% (At 1Khz); Flatness: +0.05Db 1Hz - 100Khz..
Square Wave Parameters: Amplitude: 8V (No Load) At 9V Dc Input; Rise Time: Less Than 50Ns (At 1Khz); Fall Time: Less Than 30Ns (At 1Khz); Symmetry: Less Than 5% (At 1Khz)..
This Is A Diy Kit With All Are Through Hole Components,Easily Assemble The Function Generator By Yourself..
Output Frequency Range: 1Hz-1Mhz And Adjustable Frequency And Amplitude..
Features
- High Precision, can generate sine/triangle/square waveforms.
- Output frequency range: 1Hz-1MHz and Adjustable frequency and amplitude.
- Wide power supply range, use 9-12V external power or 9V battery(NOT Included).
- This is a DIY kit with All are through hole components,easily assemble the Function Generator by yourself.
- Sine wave parameters:Amplitude: 0-3V at 9V DC input; Distortion: less than 1% (at 1KHz); Flatness: +0.05dB 1Hz - 100kHz.
- Square wave parameters: Amplitude: 8V (no load) at 9V DC Input; Rise Time: less than 50ns (at 1KHz); Fall Time: less than 30ns (at 1KHz); Symmetry: less than 5% (at 1KHz).
- Triangle wave: Amplitude: 0-3V at 9V DC input; Linearity: less than 1% (up to 100 KHz) 10 mA.
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
Dimensions: 0.40 x 4.00 x 3.15 Inches
See On Amazon #10
Onyehn 10V-60V PWM DC Motor Governor,Stepless Variable Rotary Switches 12V 24V 36V 48V Pulse With Modulator Waterproof Shell
Asin: B07C18BZNF | Ean: 6869225293628
Dc Motor Controller Input Is Connected To Direct Current, Can Not Be Connected To Alternating Current, Or It Will Be Burnt..
Suitable For 12V Motors With Power Less Than 120W, 24V Motors With Power Less Than 240W, Etc..
Make Sure The Positive And Negative Polarity Is Connected Correctly, Otherwise The Controller Will Be Damaged..
Comes With Screw Terminal And A Indication Label Of Power And Motor Electrodes For Convenient Wiring..
Features
- This speed controller has a delicate and practical housing which is waterproof so you can use it out of doors.
- Comes with screw terminal and a indication label of power and motor electrodes for convenient wiring.
- DC motor controller input is connected to direct current, can not be connected to alternating current, or it will be burnt.
- Make sure the positive and negative polarity is connected correctly, otherwise the controller will be damaged.
- Suitable for 12V motors with power less than 120W, 24V motors with power less than 240W, etc.
- See more on Amazon...
Brand: Onyehn
See On Amazon #11
Onyehn DC Motor PWM Speed Controller3V 6V 12V 24V 35V Speed Control Switch Mini LED Dimmer 5A 90W(Pack of 4pcs)
Asin: B07GP72BWV | Model: z002 | PartNumber: z002 | Ean: 8011533039902
Default Disconnection Of Short Circuit Point, Suitable For 5-35V Input. Manually Connect The Short Circuit Point According Your Needs, Suitable For Low Power 3-15V Input..
It Is Not Only To Use For Dc Motor Controls Of The Speed,But Also To Use For Adjust The Led Light..
By Screwing The Potentiometer, You Can Turn Off Power Supply Output. High Voltage And High Current Resettable Fuse, Overcurrent Automatic Disconnection, Power Off For Cooling For A Few Seconds Fuses Automatic Recovery..
Mini Dc 6-35V 5A Pwm Motor Speed Controller. Wide Voltage Dc Motor Speed Controller, Pwm Duty Cycle: 1% -100%..
Features
- Mini Style DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM).
- Mini DC 6-35V 5A PWM Motor Speed Controller. Wide voltage DC motor speed controller, PWM duty cycle: 1% -100%.
- Default disconnection of short circuit point, suitable for 5-35V input. Manually connect the short circuit point according your needs, suitable for low power 3-15v input.
- By screwing the potentiometer, you can turn off power supply output. High voltage and high current resettable fuse, overcurrent automatic disconnection, power off for cooling for a few seconds fuses automatic recovery.
- It is not only to use for dc motor controls of the speed,but also to use for adjust the LED light.
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
See On Amazon #12
Onyehn 10Pcs GT2 Idler Timing Pulley Bearing 20T 20 Tooth 5mm Bore 20 Teeth Suitable for 6mm Belt Reprap 3D Printer
Asin: B07J4JC2N7 | Model: LA028 | PartNumber: LA028 | Ean: 8011533040274
Adopting High Quality Aluminum Alloy Material,Anti-Rust And Anti-Corrosion Effectively.Sturdy And Durable..
Accurate Transmission, No Slippage During Operation, Constant Transmission Ratio..
Smooth Transmission, Buffering, Shock Absorption, Low Noise..
Each Of The Two Sides With Wheels Were Mounted Bearings..
Features
- H-type synchronous pulley wheel.
- Each of the two sides with wheels were mounted bearings.
- Adopting high quality Aluminum Alloy material anti-Rust and Anti-corrosion effectively.sturdy and durable.
- Smooth transmission, buffering, shock absorption, low noise.
- Accurate transmission, no slippage during operation, constant transmission ratio.
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
Weight: 0.04 Pounds
See On Amazon #13
Onyehn 22pcs/Lots A8&A2 3D Printer Part Each 5PCS 0.4mm Extruder Nozzle Print Head+1.75mm Teflon Throat Tube+Heater Blocks Hotend for MK8 Makerbot Reprap
Asin: B07GLTNZ22 | Model: LA010 | PartNumber: LA010 | Ean: 8011533039896
Nozzle Throat: Outer Thread - M6; Inner Diameter - 2Mm; Length - 30Mm; Filament Diameter - 1.75Mm; Material - Stainless Steel..
Quantity:22Pcs/Lot (5X 3D Printer Nozzle Throat Tube 5X Nozzle Print Heads 5X Heater Blocks Hotend 5X M6 Nuts 2X Hex Key Wrenches (For Mk8 Makerbot Reprap Prusa I3 3D Printer)).
Compatibility: Compatible With All 1.75Mm Pla Abs 3D Printer.
0.4Mm Extruder Brass Nozzle Print Head: Color - Golden; Material - Copper (Brass); Size - 5*13Mm; Input Diameter: 1.75Mm; Output Diameter: 0.4Mm..
Features
- Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm Extruder Brass Nozzle Print Head. Gift 5pcs M6 nuts and 2 hex wrenches
- 0.4mm Extruder Brass Nozzle Print Head: Color - Golden; Material - copper (brass); Size - 5*13mm; Input Diameter: 1.75mm; Output Diameter: 0.4mm.
- Nozzle Throat: Outer Thread - M6; Inner Diameter - 2mm; Length - 30mm; Filament Diameter - 1.75mm; Material - Stainless Steel.
- Compatibility: compatible with all 1.75mm PLA ABS 3D Printer
- Quantity:22pcs/lot (5x 3D Printer Nozzle Throat Tube 5x Nozzle Print Heads 5x Heater Blocks Hotend 5x M6 nuts 2x Hex Key Wrenches (for MK8 Makerbot Reprap Prusa I3 3D Printer))
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
See On Amazon #14
Onyehn BME280 5V emperature Humidity Sensor for Arduino,Atmospheric Barometric Pressure Sensor with IIC I2C Breakout (Pack of 4pcs)
Asin: B07KR24P6P | Ean: 8011655415196
Bme280 Is A Precision Sensor, Is Soldered Onto Pcb.It Uses Both I2c And Spi (Supports 3-, 4-Wire Spi) Interface..
It Is Made Up Of A Very Accurate Pressure Sensor And An Associated Temperature Sensor Which Helps Calibrate The Pressure Readings..
With An I2c Connection You Have Access To Enough Weather Data To Make Some Pretty Good Predictions For Your Local Area..
Not Only The Pressure And The Temperature, This Sensor Can Measure Humidity..
Features
- Make sure to put SDO to high to get address 0x77. This will work with BME280 library perfectly.
- Not only the pressure and the temperature, this sensor can measure humidity.
- BME280 is a precision sensor, is soldered onto PCB.It uses both I2C and SPI (supports 3-, 4-wire SPI) interface.
- With an I2C connection you have access to enough weather data to make some pretty good predictions for your local area.
- It is made up of a very accurate pressure sensor and an associated temperature sensor which helps calibrate the pressure readings.
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
Dimensions: 0.39 x 3.15 x 1.97 Inches
See On Amazon #15
Onyehn 3pcs VL53L0X Time-of-Flight (ToF) Laser Ranging Sensor Breakout 940nm GY-VL53L0XV2 Laser Distance Module I2C IIC
Asin: B07Q5Y3G4C | Model: N | PartNumber: N | Ean: 8431276575923
Maximum Sensoring Distance: 2M.
Package Includes :3X Gy-Vl53l0xv2v L53l0x Time-Of-Flight Distance Sensor(Random Color).
Working Voltage: 2.6V - 5.5V.
Range From ±3% At Best To Over ±10% In Less Optimal Conditions.
Features
- A time-of-flight ranging system integrated into a compact module
- Range from 3% at best to over 10% in less optimal conditions
- Maximum Sensoring Distance: 2m
- Working Voltage: 2.6V - 5.5V
- Package includes :3x GY-VL53L0XV2V L53L0X Time-of-Flight Distance Sensor(Random Color)
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
Dimensions: 0.39 x 3.94 x 3.15 inches
See On Amazon #16
Onyehn SONOFF USB 5V DIY 1 Channel Jog Inching Self-Locking WiFi Wireless Smart Home Switch APP Remote Control Module for iOS/Android
Asin: B07GZJP5BK | Model: SG_B07GZJP5BK_US | PartNumber: SG_B07GZJP5BK_US | Ean: 8011533040038
This Wireless Switch Supports Inching /Self-Locking Mode.You Can Add The Device To The App To Remote Control Most Home Appliances Or Devices..
Note:Wifi Name Can Only Be English Or A Combination Of Numbers Without Spaces, And Can Only Use 2.4G Frequency, Not 5G Frequency.
Remote Control Your Home Appliances Through The App Ewelink By Your Phone, Available On Both Android And Ios.
Diy Your Smart Home,Support Remote Turn On/Off ,Timing Schedules ,Device Sharing Group ,Management.
Features
- Easy installation and The switch can be applied to access control, turn on PC, garage door, etc.
- DIY Your Smart Home,Support Remote turn on/off ,Timing Schedules ,Device Sharing Group ,Management
- This wireless switch supports inching /self-locking mode.you can add the device to the APP to remote control most home appliances or devices.
- Remote control your home appliances through the App eWeLink by your phone, available on both Android and iOS
- NOTE:WiFi name can only be English or a combination of numbers without spaces, and can only use 2.4G frequency, not 5g frequency
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
Dimensions: 0.39 x 5.91 x 3.94 Inches
See On Amazon #17
Onyehn DC Motor PWM Speed Controller 3V 6V 12V 24V 35V Speed Control Switch Mini LED Dimmer 5A 90W(Pack of 10pcs)
Asin: B07S8JX5SQ | Model: z002 | PartNumber: z002 | Ean: 8431276576159
Default Disconnection Of Short Circuit Point, Suitable For 5-35V Input. Manually Connect The Short Circuit Point According Your Needs, Suitable For Low Power 3-15V Input..
It Is Not Only To Use For Dc Motor Controls Of The Speed,But Also To Use For Adjust The Led Light..
By Screwing The Potentiometer, You Can Turn Off Power Supply Output. High Voltage And High Current Resettable Fuse, Overcurrent Automatic Disconnection, Power Off For Cooling For A Few Seconds Fuses Automatic Recovery..
Mini Dc 6-35V 5A Pwm Motor Speed Controller. Wide Voltage Dc Motor Speed Controller, Pwm Duty Cycle: 1% -100%..
Features
- Mini Style DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM).
- Mini DC 6-35V 5A PWM Motor Speed Controller. Wide voltage DC motor speed controller, PWM duty cycle: 1% -100%.
- Default disconnection of short circuit point, suitable for 5-35V input. Manually connect the short circuit point according your needs, suitable for low power 3-15v input.
- By screwing the potentiometer, you can turn off power supply output. High voltage and high current resettable fuse, overcurrent automatic disconnection, power off for cooling for a few seconds fuses automatic recovery.
- It is not only to use for dc motor controls of the speed,but also to use for adjust the LED light.
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
Dimensions: 0.79 x 5.91 x 3.94 Inches
See On Amazon #18
Onyehn 1 Channel DC 3V Relay High Level Driver Module Optocoupler Relay Module Isolated Drive Control Board for Arduino (Pack of 8)
Asin: B07PNB86R7 | Model: relay8 | PartNumber: relay8 | Ean: 8431246151102
On-Board Signal Output Indicator, Wire Terminal And Installing Holescompatible With 10A 250Vac And 10A 30Vdc Load.
Relay Module: Srd-Dc03v-Sl-C;Channel: 1 Channel;Working Voltage: Dc 3-3.3V;Compatible Load: 10A 250Vac / 10A 30Vdc;Single Socket Length: 7.5Mm.
Module Size: 70Mmx17mmx20mm / 2.76X0.70X0.79 Inch (L*W*H).
Fast Response Time Less Than 20Ms And Longlife Time Up To 100,000 Times Snap Action.
Features
- 1 channel 3V/3.3V power relay mdoule support photocoupler isolation control;Support dual power supply input ensure high anti-iinterference ability
- Fast response time less than 20ms and longlife time up to 100,000 times snap action
- On-board signal output indicator, wire terminal and installing holescompatible with 10A 250VAC and 10A 30VDC load
- Module Size: 70mmX17mmX20mm / 2.76X0.70X0.79 inch (L*W*H)
- Relay Module: SRD-DC03V-SL-C;Channel: 1 channel;Working Voltage: DC 3-3.3V;Compatible Load: 10A 250VAC / 10A 30VDC;Single Socket Length: 7.5mm
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
See On Amazon #19
Onyehn 2pcs JDS-050/JDS-055 Replacement Charging Port Assembly for PS4 DualShock 4, Repair Part Micro USB Adaptor Charger Socket Board Connector Module(with 12 pin Eject Ribbon Flex Cable)
Asin: B09SH2F3RF | Model: 2 | PartNumber: 2 | Ean: 0766397644769 | UPC: 766397644769
Please Disassemble Your Ps4 Controller In Hand And Compare With The Charging Board Pictures As Our Listing Shows. Please Purchase The Correct Part..
Package Include: 2 X Charging Port Board(Jds-050/055) + 2*12 Pin Flex Ribbon Cable.
Instructions Are Not Included.Please Replace This Part Under Professional Guide, If Not, No Try.
Notice: There Are Launched 5 Edition Of This Dualshock 4 Controller. They Come With Different Built-In Charger Module.Be Sure To Check That Your Version Is As Shown In The Picture Before Placing Your Order..
Features
- Model: USB Charging Port Socket Board(JDS-055/050) with 12 pin flex ribbon cable.
- Notice: There are launched 5 edition of this DualShock 4 controller. They come with different built-in charger module.Be sure to check that your version is as shown in the picture before placing your order.
- Please Disassemble your PS4 controller in hand and compare with the charging board pictures as our listing shows. Please Purchase the correct part.
- Instructions are not included.Please Replace This Part Under Professional Guide, If Not, NO TRY
- Package include: 2 X Charging Port Board(JDS-050/055) + 2*12 Pin flex ribbon cable
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
Dimensions: 0.39 x 3.15 x 1.97 Inches | Weight: 0.04 Pounds
See On Amazon #20
Onyehn 6 pcs/lot Volcano Eruption Heat Block Hot End for 1.75/3mm Filament Aluminium Extruder J-Head Heater Block fit for E3D Volvano Print Head Hot End Heating Block for 3D Printers Part
Asin: B07K46ZK7B | Model: Heat Block | PartNumber: Heat Block | Ean: 8011655415035
Threaded Tube Hole: M6.
Thermocouple Mounting Hole: M3.
Heater Mounting Hole: 6Mm Diameter.
Size: 20Mm X 20Mm X 11.5Mm.
Features
- Material: Aluminum Alloy
- size: 20mm x 20mm x 11.5mm
- Threaded Tube Hole: M6
- Heater Mounting Hole: 6mm diameter
- Thermocouple Mounting Hole: M3
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
See On Amazon #21
Onyehn 10pcs Low Voltage DC Motor Speed Controller 1.8v 3v 5v 6v 7.2v 12v 2A 30W PWM 1803BK Adjustable Driver Switch with Speed Control Knob(10 Pack)
Asin: B07NPJ5MQR | Model: 1803BK | PartNumber: 1803BK | Ean: 8011655415424
With A Self-Recovery Fuse 2A And A Power-On Led Light.If The Current Is Too Large, It Will Be Automatically Disconnected, And The Fuse Will Automatically Recover After Cooling. Pwm Dc Motor Speed Controller With Switch Function..
This Is A Speed Governor With A Maximum Current Of 2A. If The Continuous Current Is Greater Than 0.5A, The 775 Motor And The Stroller Motor Will Not Move. Don't Buy It Wrong. It Is Not Recommended To Supply Power Greater Than 12V, Such As 12V Lead-Acid Batteries, Which May Cause Damage To The Governor..
Connect A Voltage Of 1.8V-15V Dc To The Circuit Making Sure Of The Correct Polarity Of The Connection. Note That The Voltage Applied To The Motor Will Be Supply Voltage Applied To The Circuit. It Is Recommended To Add An Appropriately Rated Fuse In Line With The Positive Supply In Order To Protect The Circuit From Any Possible Short Circuits..
Note: Dc Motor Speed Regulator Dc Power Supply, Do Not Be Directly Connected To Household 220V Ac.This Brand New 1803Bk Dc Motor Speed Controller Allows Controlling The Direction Of A Dc The Motor Using A Pulse-Width-Modulated (Pwm) Dc Voltage With A Duty Cycle Fully The Product Adjust From 0%-100%..
Features
- IMPORTANT NOTES AN APPROPRIATELY RATED FUSE (RATED A LITTLE HIGHER THAN THE MAXIMUM CURRENT YOU EXPECT TO DRAW) IS RECOMMENDED TO ENSURE SAFE OPERATION. THE CONTROLLER IS SAFE WITH A SELF-RECOVERY FUSE 2A. IT WILL BE DAMAGED IF CONNECT THE SUPPLY VOLTAGE WITH WRONG POLARITY. DOUBLE CHECK ALL CONNECTIONS BEFORE APPLYING POWER AND ALWAYS TURN OFF THE POWER SUPPLY BEFORE MAKING ANY WIRING CHANGES
- NOTE: DC MOTOR SPEED REGULATOR DC POWER SUPPLY, DO NOT BE DIRECTLY CONNECTED TO HOUSEHOLD 220V AC.This Brand New 1803BK DC Motor Speed Controller allows controlling the direction of a DC the motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully the product adjust from 0%-100%.
- With a self-recovery fuse 2A and a Power-On LED light.If the current is too large, it will be automatically disconnected, and the fuse will automatically recover after cooling. PWM DC motor speed controller with switch function.
- CONNECT A VOLTAGE OF 1.8V-15V DC TO THE CIRCUIT MAKING SURE OF THE CORRECT POLARITY OF THE CONNECTION. NOTE THAT THE VOLTAGE APPLIED TO THE MOTOR WILL BE SUPPLY VOLTAGE APPLIED TO THE CIRCUIT. IT IS RECOMMENDED TO ADD AN APPROPRIATELY RATED FUSE IN LINE WITH THE POSITIVE SUPPLY IN ORDER TO PROTECT THE CIRCUIT FROM ANY POSSIBLE SHORT CIRCUITS.
- This is a speed governor with a maximum current of 2A. If the continuous current is greater than 0.5A, the 775 motor and the stroller motor will not move. Don't buy it wrong. It is not recommended to supply power greater than 12V, such as 12V lead-acid batteries, which may cause damage to the governor.
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
Weight: 0.17 Pounds
See On Amazon #22
Onyehn 4pcs Low Voltage DC Motor Speed Controller 1.8v 3v 5v 6v 7.2v 12v 2A 30W PWM 1803BK Adjustable Driver Switch with Speed Control Knob(4 Pack)
Asin: B08XQ22F47 | Model: 1803bk | PartNumber: 1803bk | Ean: 0719022857607 | UPC: 719022857607
With A Self-Recovery Fuse 2A And A Power-On Led Light.If The Current Is Too Large, It Will Be Automatically Disconnected, And The Fuse Will Automatically Recover After Cooling. Pwm Dc Motor Speed Controller With Switch Function..
This Is A Speed Governor With A Maximum Current Of 2A. If The Continuous Current Is Greater Than 0.5A, The 775 Motor And The Stroller Motor Will Not Move. Don't Buy It Wrong. It Is Not Recommended To Supply Power Greater Than 12V, Such As 12V Lead-Acid Batteries, Which May Cause Damage To The Governor..
Connect A Voltage Of 1.8V-15V Dc To The Circuit Making Sure Of The Correct Polarity Of The Connection. Note That The Voltage Applied To The Motor Will Be Supply Voltage Applied To The Circuit. It Is Recommended To Add An Appropriately Rated Fuse In Line With The Positive Supply In Order To Protect The Circuit From Any Possible Short Circuits..
Note: Dc Motor Speed Regulator Dc Power Supply, Do Not Be Directly Connected To Household 220V Ac.This Brand New 1803Bk Dc Motor Speed Controller Allows Controlling The Direction Of A Dc The Motor Using A Pulse-Width-Modulated (Pwm) Dc Voltage With A Duty Cycle Fully The Product Adjust From 0%-100%..
Features
- Important Notes An Appropriately Rated Fuse (Rated A Little Higher Than The Maximum Current You Expect To Draw) Is Recommended To Ensure Safe Operation. The Controller Is Safe With A Self-Recovery Fuse 2a. It Will Be Damaged If Connect The Supply Voltage With Wrong Polarity. Double Check All Connections Before Applying Power And Always Turn Off The Power Supply Before Making Any Wiring Changes
- Note: Dc Motor Speed Regulator Dc Power Supply, Do Not Be Directly Connected To Household 220v Ac.This Brand New 1803bk Dc Motor Speed Controller Allows Controlling The Direction Of A Dc The Motor Using A Pulse-Width-Modulated (Pwm) Dc Voltage With A Duty Cycle Fully The Product Adjust From 0%-100%.
- With A Self-Recovery Fuse 2a And A Power-On Led Light.If The Current Is Too Large, It Will Be Automatically Disconnected, And The Fuse Will Automatically Recover After Cooling. Pwm Dc Motor Speed Controller With Switch Function.
- Connect A Voltage Of 1.8v-15v Dc To The Circuit Making Sure Of The Correct Polarity Of The Connection. Note That The Voltage Applied To The Motor Will Be Supply Voltage Applied To The Circuit. It Is Recommended To Add An Appropriately Rated Fuse In Line With The Positive Supply In Order To Protect The Circuit From Any Possible Short Circuits.
- This Is A Speed Governor With A Maximum Current Of 2a. If The Continuous Current Is Greater Than 0.5a, The 775 Motor And The Stroller Motor Will Not Move. Don'T Buy It Wrong. It Is Not Recommended To Supply Power Greater Than 12v, Such As 12v Lead-Acid Batteries, Which May Cause Damage To The Governor.
- See more on Amazon...
Brand: Onyehn
Dimensions: 0.39 x 3.15 x 1.97 Inches
See On Amazon #23
Onyehn 2pcs 24 Pin ATX Power Supply Breakout Adapter Module Desktop Computer Chassis Power Supply ATX Transfer Board 12V 5V 3.3V
Asin: B07GDKZ8XC | Model: LA003-1 | PartNumber: LA003-1 | Ean: 8431246150822
Provide Quick Access To The Typical Voltages Needed Including 3.3V, 5V, 12V And -12V.
On-Board Standard 24Pin Atx Port, Power Indicator And Power Switch Easy To Control Ideal To Diy Low Voltage Power Supply For Developing Physical Computing Projects (Embedded Systems).
Each Output Channel Has Replaceable 5A Fuse And Corresponding Ground Connection With Binding Post Easy To Connect.
With Power Light And Power Switch..
Features
- The benchtop power board kit was created to provide quick access to the typical voltages needed when developing physical computing projects (embedded systems).
- With power light and power switch.
- Provide quick access to the typical voltages needed including 3.3V, 5V, 12V and -12V
- Each output channel has replaceable 5A fuse and corresponding ground connection with binding post easy to connect
- On-board standard 24pin ATX port, power indicator and power switch easy to control ideal to DIY low voltage power supply for developing physical computing projects (embedded systems)
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
Dimensions: 0.79 x 5.91 x 3.94 Inches
See On Amazon #24
Onyehn Hall Magnetic Sensor Module for Arduino AVR Smart Cars DIY Starter Kits(Pack of 12pcs)
Asin: B07JMQFY6G | Model: Z035 | PartNumber: Z035 | Ean: 8011655414946
Uses The Semiconductor Integrated Technology Manufacturing Magnetic Susceptibility Of The Circuit..
Its Input For The Magnetic Induction Intensity, The Output Is A Digital Voltage Signal..
It Is By The Voltage Regulator, Hall Voltage Generator, Differential Amplifier, Schmidt Triggers, Temperature Compensation And The Open Collector Output Stage Circuit Composed Of Magnetic Sensitive Sensor Circuit..
Hall Switch Integrated Circuit Using Hall Effect Principle..
Features
- Material: PCB and a hall effect sensor.
- Hall Switch Integrated Circuit Using hall Effect Principle.
- USES The Semiconductor Integrated Technology Manufacturing Magnetic Susceptibility of the Circuit.
- It is by the Voltage Regulator, Hall Voltage Generator, Differential Amplifier, Schmidt Triggers, Temperature Compensation and the Open Collector Output Stage Circuit Composed of Magnetic Sensitive Sensor Circuit.
- Its Input For the Magnetic Induction Intensity, the Output is a Digital Voltage Signal.
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
Weight: 0.04 Pounds
See On Amazon #25
Onyehn 8Pcs/Set 18 Pin Signal Cable 2X9 Pins Miner Connect Date Cable for Bitmain Antminer S9 S7 L3 Machine
Asin: B09XXJQMWX | Ean: 0768484434727 | UPC: 768484434727
Feet Spacing: 2.0Mm.
Note: Different Computer Display, The Product Color May Be Different From The Picture.
Cable Long: 21Cm.
Suitable For Anterminer S9 S7 S17 S19 L3+ L3++ K5 R4.
Features
- Connect type: 2 x 9pin connector
- Suitable for anterminer S9 S7 S17 S19 L3+ L3++ K5 R4
- Feet spacing: 2.0mm
- Cable long: 21cm
- Note: different computer display, the product color may be different from the picture
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
See On Amazon #26
Onyehn2PCS 40cm 6 Pin PCIE Mining Power Supply Connector Cable for Bitmain Antminer APW7 + APW3 PSU L3 D3
Asin: B09XXBWF1X | Ean: 0768484434635 | UPC: 768484434635
【Fit For】This Cable Interface Suit For Models Are: S7, S9, S11, T9+, X10, L3+, A3, A841 And So On!(It Can Be Universal For The Same Interface , Yellow Line Positive Black Line Negative).
【Solution】Best Solution For Replacing The Original Pcie Power Cable Of Bitmain Antminer Miners..
【Feature】The Ring Terminals 14-5 End To Plug Into The Terminals Of Bitmain Miners And 5X 6 Pin Pcie Male Ends To Plug Into The Video Graphics Card..
【Compatibility】Compatible With All Versions Of Graphics Cards With Standard 6 Pin Pcie Port, Bitmain Antminer..
Features
- Wire Specification Length:16inch/40cm, Gauge: 1007 18AWG, Quantity: 2pcs.
- Compatibility Compatible with all versions of graphics cards with standard 6 pin PCIe port, Bitmain Antminer.
- Fit for This cable interface suit for models are: S7, S9, S11, T9+, X10, L3+, A3, A841 and so on!(it can be universal for the same interface , Yellow line positive black line negative)
- Feature The ring terminals 14-5 end to plug into the terminals of Bitmain miners and 5x 6 pin PCIe male ends to plug into the video graphics card.
- Solution Best solution for replacing the original PCIe power cable of Bitmain Antminer miners.
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
See On Amazon #27
Onyehn 5pcs 42 Stepper Motor Mounting Bracket Holder with M3 Screws Nuts 5 Pack,L Shape Fixed Bracket for 3D Printer
Asin: B07D7P2DC3 | Model: 226 | PartNumber: 226 | Ean: 6869225293710
The Motor Mount Made Of 3 Mm Steel Integrated Manufacturing Process And Welding On Both Sides To Strengthen Fixed Reinforcement To Ensure Enough Strength..
Ideal For Many Hobby And Replacement Applications..
All Slot Hole For High Precision Punch A Punching Processing,Perfect Fit For Your 42Mm Nema 17 Stepper Motor.
Durable Alloy Steel Provide Strong Bearing Pressure When Printing..
Features
- Mounting Holes: 31mm center-to-center; Max Collar Diameter: 22mm
- Durable alloy steel provide strong bearing pressure when printing.
- The motor mount made of 3 mm steel integrated manufacturing process and welding on both sides to strengthen fixed reinforcement to ensure enough strength.
- All slot hole for high precision punch a punching processing,perfect fit for your 42mm Nema 17 Stepper Motor
- Ideal for many hobby and replacement applications.
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
Dimensions: 0.39 x 7.87 x 5.91 Inches
See On Amazon #28
Onyehn TL-Smoother Addon Module for Pattern Elimination Motor Filter Clipping Filter 3D Printer Motor Drivers Controller(Pack of 6pcs)
Asin: B07GJF1KFC | Model: TL-Smoother | PartNumber: TL-Smoother | Ean: 8011533039841
The Board Provides Flyback Diodes (Freewheeling Diodes) For The Motor Outputs..
You Will Got Smoother Movement Especially On The Delta-Style 3Dprinter Under Dvr8825 Stepper Drivers And A4988/2 Drivers..
Also Protected Against Induction Voltages In The Unpowered State Of The Driver..
Lower Vibration Lower Noise Smoother Result..
Features
- The TL-Smoother is an addon module for 3D printer stepper motor drivers.
- Lower vibration lower noise smoother result.
- The board provides flyback diodes (freewheeling diodes) for the motor outputs.
- Also protected against induction voltages in the unpowered state of the driver.
- You will got smoother movement especially on the delta-style 3Dprinter under DVR8825 stepper drivers and A4988/2 drivers.
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
See On Amazon #29
Onyehn 3D Printer Parts 6 pcs Volcano Heater Block Silicone Sock Cover with 0.4mm Brass Nozzles for Vyper, Kobra Plus Print Part
Asin: B07K451J77 | Model: LA042 | PartNumber: LA042
Compatible Models: This Silicone Socks And Nozzles Kit Is Compatible With Anycubic Vyper, Kobra Plus, Kobra Max Fdm 3D Printers.Notice: This Block Silicone Sock Is Not Suitable For Pt100 Volcano Heater Block(Only For Size:20 * 20 * 11.5Mm Volcano Heating Block).
What You Get: 6 Pcs 0.4Mm Brass Nozzles And 6 Pcs Silicon Socks..
Extend The Service Life Of The Hotend: Silicone Socks Can Effectively Prevent The Filament From Clogging On The Heating Block When There Is An Abnormality In Printing, Resulting In The Subsequent Unavailability Of The Hot End Kit, Which Can Extend The Usage Of The Hot End Kit..
0.4Mm Brass Nozzles: The Nozzle Is Made Of High Quality Brass With Smooth Inner Wall And No Burr, Which Can Ensure Even And Smooth Filament Output, While Not Easily Clogging The Nozzle And Improving Print Quality..
Features
- Silicone Socks: The silicone sock is made of high quality silicone, which can withstand high temperature of 300 and can avoid burns when your hand accidentally touches the print head during printing, and also keep the heating block and nozzle clean.
- 0.4mm Brass Nozzles: The nozzle is made of high quality brass with smooth inner wall and no burr, which can ensure even and smooth filament output, while not easily clogging the nozzle and improving print quality.
- Compatible Models: This silicone socks and nozzles kit is compatible with Anycubic Vyper, Kobra Plus, Kobra Max FDM 3D Printers.Notice: This Block Silicone Sock is not suitable for PT100 Volcano Heater Block Only for Size:20 * 20 * 11.5mm Volcano heating block
- Extend the service life of the hotend: silicone socks can effectively prevent the filament from clogging on the heating block when there is an abnormality in printing, resulting in the subsequent unavailability of the hot end kit, which can extend the usage of the hot end kit.
- What you get: 6 PCS 0.4mm brass nozzles and 6 PCS silicon socks.
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
See On Amazon #30
Onyehn 16 Channel PWM Servo Motor Driver PCA9685 IIC Module 12-Bit for Arduino Robot or Raspberry pi(Pack of 4pcs)
Asin: B07GJCPWW2 | Ean: 8011513634509
6 Address Select Pins So You Can Wire Up To 62 Of These On A Single I2c Bus, A Total Of 992 Outputs..
12-Bit Resolution For Each Output - For Servos, That Means About 4Us Resolution At 60Hz Update Rate..
Adjustable Frequency Pwm Up To About 1.6 Khz;Configurable Push-Pull Or Open-Drain Outputmanufacturer..
It Is 5V Compliant, Which Means You Can Control It From A 3.3V Microcontroller And Still Safely Drive Up To 6V Outputs (This Is Good For When You Want To Control White Or Blue Leds With 3.4+ Forward Voltages)..
Features
- Communication Interface: IIC.
- It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages).
- 6 address select pins so you can wire up to 62 of these on a single i2c bus, a total of 992 outputs.
- Adjustable frequency PWM up to about 1.6 KHz;Configurable push-pull or open-drain outputManufacturer.
- 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate.
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
Dimensions: 0.79 x 5.91 x 3.15 Inches | Weight: 0.08 Pounds
See On Amazon