PNBO - Buying Guide
Last Updated: 04/28/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
PNBO Wall Handrail 2FT/60CM,Industrial Staircase Railing 1.25 Inch Tube Diameter,Galvanized Pipe Handrail,Handrails for Indoor Stairs with Wall Mount Support,for Wall Mounted Stairway Handrail
Asin: B09JKCMHKS | Model: BT-WH | PartNumber: BT-WH
✅〖Widely Used In Various Venues〗: Pipe Handrails Can Be Installed Next To The Bathtub, Next To The Toilet, Corridors, Stairs, Door Handles, Hangers, Drawer Handles, Etc. To Prevent The Bottom Of The Feet From Slipping And Falling. In Addition, It Can Also Be Used To Hang Towels Or Clothes..
✅〖The Best Gift Choice🎁〗: If There Are Elderly, Children, Disabled People, Pregnant Women And Other People With Mobility Impairments In The Home, Set Up Handrails For Them To Ensure Their Safety..
✅〖Easy To Install〗: Whether Indoor Or Outdoor, No Matter What Angle, You Can Install It According To Your Needs. And It Is Easy To Install. It Only Needs Four Steps To Complete. 1. Mark The Position; 2. Drill Holes With Electric Drill; 3. Drill Expansion Granules Into The Holes; 4. Fix And Tighten.②Handrails For Indoor Stairs Can Be Applied To Wood, Brick, Stucco And Concrete Walls. Note: Our Accessory Drill Bits Are Suitable For Wood..
✅〖Sturdy Design〗：The Outer Diameter Of The Armrest Is 1.25In, Which Is Suitable For Holding With All Hands And Is Safe And Anti-Drop. The Base Is Designed With Four Screw Fixing Points For Firmer Installation.High Load-Bearing Capacity..
Features
- 2FT Pipe Stair Handrail : Made of high quality galvanized pipe with unique black powder coating, anti-corrosion and waterproof, not easy to fade and rust, long service life. The surface is smooth and flat to prevent you from being cut in the process of use. The integrated corner design makes the appearance look more concise and clear. And include a variety of sizes for your choice.
- Sturdy Design The outer diameter of the armrest is 1.25in, which is suitable for holding with all hands and is safe and anti-drop. The base is designed with four screw fixing points for firmer installation.High load-bearing capacity.
- Widely Used in Various Venues : Pipe Handrails can be installed next to the bathtub, next to the toilet, corridors, stairs, door handles, hangers, drawer handles, etc. To prevent the bottom of the feet from slipping and falling. In addition, it can also be used to hang towels or clothes.
- Easy to install : Whether indoor or outdoor, no matter what angle, you can install it according to your needs. And it is easy to install. It only needs four steps to complete. 1. mark the position; 2. drill holes with electric drill; 3. drill expansion granules into the holes; 4. fix and tighten. Handrails for Indoor Stairs can be applied to wood, brick, stucco and concrete walls. Note: Our accessory drill bits are suitable for wood.
- The Best Gift Choice : If there are elderly, children, disabled people, pregnant women and other people with mobility impairments in the home, set up handrails for them to ensure their safety.
- See more on Amazon...
Brand: PNBO | Manufacturer: PNBO
Dimensions: 2.76 x 19.69 x 3.94 Inches
See On Amazon #2
PNBO Woodworking Lathe Headstock Spindle Adapter, Converts 3/4" x 10TPI to 1" x 8TPI
Asin: B08S6WKRGS | Model: LECHANG | PartNumber: LECHANG | Ean: 0744337285050 | UPC: 744337285050
✅Convert A 3/4" X 10Tpi Lathe Headstock Spindle To 1" X 8Tpi..
✅The Weight Of The Adapter Is 0.77Lb. The Length Is 2.3" And The Width Is 2". This Will Extend The Spindle Length By Approximately 1-1/2"..
✅The Adapter Body Is Made Of Hard Steel. Greatly Extend The Service Life..
✅Install The External Thread Of The Chuck: 1" X 8 Tpi..
Features
- Install the internal thread of the spindle: 3/4" x 10TPI .
- Install the external thread of the chuck: 1 x 8 TPI.
- Convert a 3/4 x 10TPI lathe headstock spindle to 1 x 8TPI.
- The adapter body is made of hard steel. Greatly extend the service life.
- The weight of the adapter is 0.77LB. The length is 2.3 and the width is 2. This will extend the spindle length by approximately 1-1/2.
- See more on Amazon...
Brand: PNBO | Manufacturer: PNBO
See On Amazon #3
PNBO Arbor Press Drift (2pcs)
Asin: B0BTCRGMRK | Model: 1 | PartNumber: 1 | Ean: 0727198924436 | UPC: 727198924436
Brand: PNBO | Manufacturer: PNBO
See On Amazon #4
PNBO 20 pc 1/2"Carbide Tip Tipped Cutter Tool Bit Cutting Set For Metal Lathe Tooling.
Asin: B0BJPGT5VL | Model: HJCDH-1 | PartNumber: HJCDH-1 | Ean: 0727720399312 | UPC: 727720399312
Package Included:The Upper Layer 10 Pieces Of The 20 Sets Are C6 Sets And Lower Layer 10 Pieces Are C2 Sets.The C6 Set Is Machining Steel Parts And The C2 Set Is Machining Iron Parts..
Note:Use The Wrong Blade, The Blade Is Wear Too Fast..
Processing Material:The C6 Set Is Machining Steel Parts And The C2 Set Is Machining Iron Parts..
Cut Degree：Ar8(90°), Al8(90°), Br8(75°), Bl8(75°), E8(60°) ,C8(90°).
Features
- MODEL INCLUDED:2xAR8,2xAL8,2xBR8,1xBL8,2xE8,1xC8.
- CUT DEGREE AR8(90 ), AL8(90 ), BR8(75 ), BL8(75 ), E8(60 ) ,C8(90 )
- PACKAGE INCLUDED:The upper layer 10 pieces of the 20 sets are C6 sets and lower layer 10 pieces are C2 sets.The C6 set is machining steel parts and the C2 set is machining iron parts.
- PROCESSING MATERIAL:The C6 set is machining steel parts and the C2 set is machining iron parts.
- NOTE:Use the wrong blade, the blade is wear too fast.
- See more on Amazon...
Brand: PNBO | Manufacturer: PNBO
See On Amazon #5
PNBO Woodworking Lathe Headstock Spindle Adapter, Converts 1" x 12tpi to 1" x 8tpi
Asin: B09SNQ4VMT | Model: KZ-2 | PartNumber: KZ-2 | Ean: 0759661401137 | UPC: 759661401137
✅Flats Allow For Solid Wrench Tool Grip For Tightening And It Can Be Easily Removed From The Lathe..
✅ Woodworking Lathe Chuck Thread Changer Connects The Accessories You Need, Such As Chucks, Panels And Other Related Tools, To Work On Your Lathe.
✅Package: 1" X 12 Tpi To A 1" X 8 Tpi Lathe Headstock Spindle Adapter.Wrench Not Included.
✅Install The Internal Thread Of The Spindle: 1"X8 Tpi.Install The External,Thread Of The Chuck:1" X 12Tpi.Allows A 1" X 12Tpi Threaded Spindle To Accept 1" X 8Tpi Threaded Chucks..
Features
- The adapter body is made of hard steel. Greatly extend the service life.Weighs 1.76 pounds; Extends spindle length approximately 1-1/2"
- Install the internal thread of the spindle: 1x8 TPI.Install the external,thread of the chuck:1 x 12TPI.Allows a 1 x 12tpi threaded spindle to accept 1 x 8tpi threaded chucks.
- Flats allow for solid wrench tool grip for tightening and it can be easily removed from the lathe.
- Package: 1 x 12 TPI to a 1 x 8 TPI lathe headstock spindle adapter.Wrench not included
- Woodworking lathe chuck thread changer connects the accessories you need, such as chucks, panels and other related tools, to work on your lathe
- See more on Amazon...
Brand: PNBO | Manufacturer: PNBO
See On Amazon #6
PNBO 1/32"- 5/8" Super Heavy Duty Drill Press Chuck Keyless JT33 Mount & MT2-JT33 Drill Chuck Arbor, High-Precision
Asin: B09XTN8XHD | Model: 1-16mm JT33 MT2 | PartNumber: 1-16mm JT33 MT2
【Self Tightening 】-First Clamp It Lightly,The Increase In Torque During Processing Also Increases The Clamping Force,Which Make The Processing More Efficient And Fast..
【Wide Application】- It Is Suitable For Clamping Straight Shank Drill, Center Drill And Straight Shank Cutter,Etc.Widely Use For Meet Different Scenes Needs..
【Durable Construction】- The Drill Chuck Is Made Of High Carbon Steel Makes It Anti Corrosion And Anti Rust.Surface Reinforcement Treatment Makes It More Durable And Increases Its Bearing Capacity..
【Pertect Design】-The 3-Jaw Of Drill Chuck Is Hardened And The Jaw Lock Smoothly.Provides Strong Grip And Anti Slipping.High Accuracy And Precision Design..
Features
- CLAMPING CAPACITY -The Keyless Drill Chuck clamp range from 1/32" to 5/8" is designed for meet various drilling bits needs.
- PERTECT DESIGN -The 3-Jaw of drill chuck is hardened and the jaw lock smoothly.Provides strong grip and anti slipping.High accuracy and precision design.
- SELF TIGHTENING -First clamp it lightly,the increase in torque during processing also increases the clamping force,which make the processing more efficient and fast.
- DURABLE CONSTRUCTION - The drill chuck is made of high carbon steel makes it anti corrosion and anti rust.Surface reinforcement treatment makes it more durable and increases its bearing capacity.
- WIDE APPLICATION - It is suitable for clamping straight shank drill, center drill and straight shank cutter,etc.Widely use for meet different scenes needs.
- See more on Amazon...
Brand: PNBO | Manufacturer: PNBO
Dimensions: 3.10 x 5.10 x 3.10 Inches
See On Amazon #7
Wood Lathe Chuck 4 Jaw Chuck 4-Inch Lathe Chucks for Woodturning 1Inch X 8Tpi Thread Lathe Chucks for Nova
Asin: B08XPGSPZT | Model: LECHANG | PartNumber: LECHANG | Ean: 0733444873885 | UPC: 733444873885
【Free Accessories】: We Will Provide You With A Set Of Installation Tools,A Wood Screw And A Spindle Adapter. These Can Help You Better Install The Chuck On The Lathe..
【Application】：Applicable To The General Lathe, Grinder, Milling Machine, Drilling Machine And Machine Accessories, Woodworking Machinery Accessories And Other Machine Tools And Accessories..
【High Performance Jaws】：The 4-Inch 4 Jaws Lathe Chuck Has The Function Of Self Centering With Superior Gripping Force,It Does Not Need To Be Repeatedly Calibrated During Clamping. It Just Needs To Clamp The Workpiece According To Your Needs, Which Is Simple, Fast And Convenient..
【Applicable Workpiece Size】：The Package Contains A Set Of Round Jaws And A Set Of Stepped Jaws. The Clamping Range Of A Set Of Round Jaws Is 1.5-2.4Inch (38-62Mm) And The Supporting Range Is 1.9-2.9Inch (48-74Mm). The Clamping Range Of The Stepped Jaw Is 0.07-1.1Inch (2-28Mm) And The Supporting Range Is 0.9-2.5Inch (24-65Mm)..
Features
- EXCELLENT QUALITY The well-designed chuck body is made of high-quality steel. The sturdy chuck can withstand high-intensity work without damage. Will greatly extend the service life of the chuck.
- APPLICABLE WORKPIECE SIZE The package contains a set of round jaws and a set of stepped jaws. The clamping range of a set of round jaws is 1.5-2.4inch (38-62mm) and the supporting range is 1.9-2.9inch (48-74mm). The clamping range of the stepped jaw is 0.07-1.1inch (2-28mm) and the supporting range is 0.9-2.5inch (24-65mm).
- FREE ACCESSORIES : We will provide you with a set of installation tools,a wood screw and a spindle adapter. These can help you better install the chuck on the lathe.
- HIGH PERFORMANCE JAWS The 4-inch 4 Jaws Lathe Chuck has the function of self centering with superior gripping force,it does not need to be repeatedly calibrated during clamping. It just needs to clamp the workpiece according to your needs, which is simple, fast and convenient.
- APPLICATION Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories.
- See more on Amazon...
Brand: PNBO | Manufacturer: PNBO
See On Amazon #8
Woodworking Lathe Headstock Spindle Adapter 3/4In x 10TPI to 1In x 8TPI, 3/4In x 10TPI to 1In x 8TPI
Asin: B09CYFPHCP | Ean: 0760587456644 | UPC: 760587456644
Install The External Thread Of The Chuck: 1" X 8 Tpi..
The Weight Of The Adapter Is 0.77Lb. The Length Is 2.3" And The Width Is 2". This Will Extend The Spindle Length By Approximately 1-1/2"..
The Adapter Body Is Made Of Hard Steel. Greatly Extend The Service Life..
Install The Internal Thread Of The Spindle: 3/4" X 10Tpi..
Features
- Convert a 3/4" x 10TPI lathe headstock spindle to 1" x 8TPI.
- Install the internal thread of the spindle: 3/4 x 10TPI.
- Install the external thread of the chuck: 1 x 8 TPI.
- The adapter body is made of hard steel. Greatly extend the service life.
- The weight of the adapter is 0.77LB. The length is 2.3 and the width is 2. This will extend the spindle length by approximately 1-1/2.
- See more on Amazon...
Brand: U/D | Manufacturer: PNBO
See On Amazon #9
PNBO Lathe Chuck 2 Inch,2-Jaw Dedicated Pen Drilling Lathe Chuck,Wood Lathe Chuck
Asin: B094FNCGW6 | Model: 0 | PartNumber: 0 | Ean: 0657573973592 | UPC: 657573973592
【Free Accessories】：We Will Provide You 2 Tightening Levers Allows You Easily To Tighten And Loosen The Jaws..
【Wide Application】：Applicable To Pen-Making Square Material Clamping, Auxiliary Drilling, End Milling.With A 1-Inch X 8Tpi Thread, Which Is Suitable For Most Woodworking Lathes On The Market..
【High Precision Design】：This Chuck Has A Special V- Slot Design Inside The Jaw,Which Is More Suitable For Clamp Square Material. The Jaws Are Attached To The Chuck Body Through An I-Shaped Structure Which Has High Precision And Firmness..
【Applicable Workpiece Size】：The Clamping Range Of The Lathe Chuck Is Approx 8×8 To 23×23Mm For Square Shaped Material.Weights 1.43 Pounds, And 2.5" Diameter..
Features
- EXCELLENT QUALITY The dedicated pen drilling lathe chuck body is made of high-quality steel. The sturdy chuck can withstand high-intensity work without damage. Will greatly extend the service life of the chuck.
- APPLICABLE WORKPIECE SIZE The clamping range of the lathe chuck is approx 8 8 to 23 23mm for square shaped material.Weights 1.43 pounds, and 2.5 diameter.
- FREE ACCESSORIES We will provide you 2 tightening levers allows you easily to tighten and loosen the jaws.
- HIGH PRECISION DESIGN This chuck has a special V- slot design inside the jaw,which is more suitable for clamp square material. The jaws are attached to the chuck body through an I-shaped structure which has high precision and firmness.
- WIDE APPLICATION Applicable to pen-making square material clamping, auxiliary drilling, end milling.With a 1-Inch x 8TPI Thread, which is suitable for most woodworking lathes on the market.
- See more on Amazon...
Brand: PNBO | Manufacturer: PNBO
See On Amazon #10
Safe Lock Woodworm Screw
Asin: B0C2465KJ7 | Ean: 0744392870048 | UPC: 744392870048
Highly Compatible: Suitable For Sorby/Record/Nova And Many Other Types Of Collets, With A Wide Range Of Application..
Professional Grade: This Screw Is A Professional Grade Tool For Making Wooden Bowls And Other Crafts, One Of The Indispensable Tools For Woodworkers..
Sturdy And Durable: The Square Shank Ensures A Secure Position Of The Chuck, Making The Whole Device More Durable And With Long Life..
Safe And Reliable: This Screw Is Designed With A Strong And Thin-Edged Thread To Securely Catch The Wood And Ensure Safety..
Features
- Quick and easy to use: With the Safe Lock Woodworm Screw, you can quickly and easily install small bowl blanks without the need for tedious steps or tools.
- Safe and reliable: This screw is designed with a strong and thin-edged thread to securely catch the wood and ensure safety.
- Highly compatible: Suitable for Sorby/Record/Nova and many other types of collets, with a wide range of application.
- Sturdy and durable: The square shank ensures a secure position of the chuck, making the whole device more durable and with long life.
- Professional grade: This screw is a professional grade tool for making wooden bowls and other crafts, one of the indispensable tools for woodworkers.
- See more on Amazon...
Brand: PNBO | Manufacturer: PNBO
See On Amazon #11
Woodworking Lathe Headstock Spindle Adapter 1" x 8TPI to 3/4" x 16TPI,Hard Steel Material
Asin: B09CYJ34FD | Ean: 0760587456613 | UPC: 760587456613
Convert A 1"X8 Tpi Lathe Headstock Spindle To 3/4" X 16Tpi..
The Weight Of The Adapter Is 0.57Lb. The Length Is 2.36" And The Width Is 1.5". This Will Extend The Spindle Length By Approximately 1-1/2"..
The Adapter Body Is Made Of Hard Steel. Greatly Extend The Service Life..
Install The External Thread Of The Chuck: 3/4" X 16Tpi..
Features
- Install the internal thread of the spindle: 1"x8 TPI.
- Install the external thread of the chuck: 3/4 x 16TPI.
- Convert a 1x8 TPI lathe headstock spindle to 3/4 x 16TPI.
- The adapter body is made of hard steel. Greatly extend the service life.
- The weight of the adapter is 0.57LB. The length is 2.36 and the width is 1.5. This will extend the spindle length by approximately 1-1/2.
- See more on Amazon...
Brand: U/D | Manufacturer: PNBO
See On Amazon #12
Woodworking Lathe Headstock Spindle Adapter 1" x 8TPI to 1-1/2-8 TPI,Hard Steel Material
Asin: B09CYS19S6 | Ean: 0760587456590 | UPC: 760587456590
Convert A 1"X8 Tpi Lathe Headstock Spindle To 1-1/2-8 Tpi..
The Weight Of The Adapter Is 0.53Lb. The Length Is 1.57" And The Width Is 1.77". This Will Extend The Spindle Length By Approximately 1-1/2"..
The Adapter Body Is Made Of Hard Steel. Greatly Extend The Service Life..
Install The External Thread Of The Chuck: 1-1/2-8 Tpi..
Features
- Install the internal thread of the spindle: 1"x8 TPI.
- Install the external thread of the chuck: 1-1/2-8 TPI.
- Convert a 1x8 TPI lathe headstock spindle to 1-1/2-8 TPI.
- The adapter body is made of hard steel. Greatly extend the service life.
- The weight of the adapter is 0.53LB. The length is 1.57 and the width is 1.77. This will extend the spindle length by approximately 1-1/2.
- See more on Amazon...
Brand: U/D | Manufacturer: PNBO
See On Amazon #13
PNBO Manual Wire Stripping Machine, Copper Wire Peeler Machine, Scrap Cable Peeler 0.06 to 0.98 Inches,Aluminum Alloy Construction with Hand Crank for Scrap Copper Recycling.
Asin: B099R941MJ | Model: 1 | PartNumber: 1 | Ean: 0765071881636 | UPC: 765071881636
✔️Large Stripping Capacity - Our Wire Stripping Machine Has Two Feeding Panels Of Four Different Sized Feed Holes. The Panel With 3 Holes Can Be Fixed Accordingly, 4 Mounting Holes Available..
✔️Portable & Convenient -This Wire Stripper Has A Compact And Long Lasting Frame Of Aluminum Alloy, Lightweight With 3.8Kg(8.38 Lbs) To Be Portable And Easy To Use. It Can Be Mounted Easily To Any Bench Or Work Station..
✔️Great Compatibility - Rotate The Top Knob To Adjust The Distance Between Blade And Shaft According To Different Cable Size; Suitable For Wires With The Diameter From 0.06" To 0.98"..
✔️Hand Crank Or Drill Driven - It Is Easy To Operate With Hand Crank Or Drill Is Driven.Also You Can Start A Electric Drill To Power It For A Convinient And Fast Working..
Features
- CONSTRUCTED FROM SOLID ALUMINUM ALLOY.
- HAND CRANK OR DRILL DRIVEN - It is easy to operate with hand crank or drill is driven.Also you can start a electric drill to power it for a convinient and fast working.
- LARGE STRIPPING CAPACITY - Our wire stripping machine has two feeding panels of four different sized feed holes. The panel with 3 holes can be fixed accordingly, 4 mounting holes available.
- GREAT COMPATIBILITY - Rotate the top knob to adjust the distance between blade and shaft according to different cable size; Suitable for wires with the diameter from 0.06 to 0.98.
- PORTABLE & CONVENIENT -This wire stripper has a compact and long lasting frame of aluminum alloy, lightweight with 3.8kg(8.38 lbs) to be portable and easy to use. It can be mounted easily to any bench or work station.
- See more on Amazon...
Brand: PNBO | Manufacturer: PNBO
See On Amazon #14
PNBO 1/32" - 1/2" Drill Chuck with #1 (JT33-MT1) and #2 (JT33-MT2) Morse Taper Arbor Heavy Duty Drill Chuck with Chuck Key, High Accuracy 0.005",for Drill Press
Asin: B09XTR4KB2 | Model: 1-13mm JT33-MT1 andMT2 （1/4-20) | PartNumber: 1-13mm JT33-MT1 andMT2 （1/4-20)
【Pertect Design】-The 3-Jaw Of Drill Chuck Provides Strong Grip And Anti Slipping.High Accuracy And Precision Design.Accuracy: 0.005".
【Wide Application】- Great For Holding Drill Bits, Small Turnings, Dowels, Pen Mandrel Shafts, And Much More..
【Durable Construction】- The Drill Chuck Is Made Of Higt Garbonsteel.It Anti Corrosion And Anti Rust.Surface Reinforcement Treatment Makes It More Durable And Increases Its Bearing Capacity..
【 Morse Taper Arbor】-The Drill Chuck Can Be Installed On The Headstock Or Tailstock Of A Lathe That Accepts Both #1Mt And #2Mt Accessories..
Features
- CLAMPING CAPACITY -The Drill Chuck clamp range from 1/32"-1/2" is designed for meet various drilling bits needs.
- MORSE TAPER ARBOR -The drill chuck can be installed on the headstock or tailstock of a lathe that accepts both #1MT and #2MT accessories.
- PERTECT DESIGN -The 3-Jaw of drill chuck provides strong grip and anti slipping.High accuracy and precision design.Accuracy: 0.005
- DURABLE CONSTRUCTION - The drill chuck is made of higt garbonsteel.It anti corrosion and anti rust.Surface reinforcement treatment makes it more durable and increases its bearing capacity.
- WIDE APPLICATION - Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more.
- See more on Amazon...
Brand: PNBO | Manufacturer: PNBO
Dimensions: 3.10 x 5.10 x 3.10 inches
See On Amazon #15
PNBO 20 pc 1/2"Carbide Tip Tipped Cutter Tool Bit Cutting Set for Metal Lathe Tooling.
Asin: B09DCG8MQC | Ean: 0760587456774 | UPC: 760587456774
Cut Degree：Ar8(90°), Al8(90°), Br8(75°), Bl8(75°), E8(60°) ,C8(.
Note:Use The Wrong Blade, The Blade Is Wear Too Fast..
Processing Material:The C6 Set Is Machining Steel Parts And The C2 Set Is Machining Iron Parts..
Model Included:2Xar8,2Xal8,2Xbr8,1Xbl8,2Xe8,1Xc8..
Features
- PACKAGE INCLUDED:The upper layer 10 pieces of the 20 sets are C6 sets and lower layer 10 pieces are C2 sets.The C6 set is machining steel parts and the C2 set is machining iron parts.
- MODEL INCLUDED:2xAR8,2xAL8,2xBR8,1xBL8,2xE8,1xC8.
- CUT DEGREE AR8(90 ), AL8(90 ), BR8(75 ), BL8(75 ), E8(60 ) ,C8(
- PROCESSING MATERIAL:The C6 set is machining steel parts and the C2 set is machining iron parts.
- NOTE:Use the wrong blade, the blade is wear too fast.
- See more on Amazon...
Brand: U/D | Manufacturer: PNBO
See On Amazon #16
PNBO 20 pc 3/8"Carbide Tip Tipped Cutter Tool Bit Cutting Set For Metal Lathe Tooling.
Asin: B09DCGSVKS | Ean: 0760587456750 | UPC: 760587456750
Cut Degree：Ar6(90°), Al6(90°), Br6(75°), Bl6(75°), E6(60°) ,C6(90°).
Note:Use The Wrong Blade, The Blade Is Wear Too Fast..
Processing Material:The C6 Set Is Machining Steel Parts And The C2 Set Is Machining Iron Parts..
Model Included:2Xar6,2Xal6,2Xbr6,1Xbl6,2Xe6,1Xc6..
Features
- PACKAGE INCLUDED:The upper layer 10 pieces of the 20 sets are C6 sets and lower layer 10 pieces are C2 sets.The C6 set is machining steel parts and the C2 set is machining iron parts.
- MODEL INCLUDED:2xAR6,2xAL6,2xBR6,1xBL6,2xE6,1xC6.
- CUT DEGREE AR6(90 ), AL6(90 ), BR6(75 ), BL6(75 ), E6(60 ) ,C6(90 )
- PROCESSING MATERIAL:The C6 set is machining steel parts and the C2 set is machining iron parts.
- NOTE:Use the wrong blade, the blade is wear too fast.
- See more on Amazon...
Brand: U/D | Manufacturer: PNBO
See On Amazon #17
PNBO 2.75-Inch Wood Lathe Chuck,4-Jaw Precision Self-Centering Key Lathe Chuck,1Inch x 8TPI Mini Thread Wood Turning Chuck Wood Lathe Accessories for Bowls Vases
Asin: B094FJ6M2J | Ean: 0657573973271 | UPC: 657573973271
【Free Accessories】：We Will Provide You With A Set Of Installation Tools. These Can Help You Better Install The Chuck On The Lathe.The Wood Screw And Sliding T-Handle Chuck Key Provides Additional Grip Strength Help You Hold The Workpiece Better In The Process..
【Application】:This Complete Lathe Chuck Set Includes A Precision Jaw And A Set Of Installation Tools, Which Bring Much Convenience To Your Operation. The Chuck Has 1" X 8 Tpi Thread .Applicable To Hold Bowls, Spindles, And Other Bulky Wood Lathe Projects..
【High Performance Jaws】：The 4 Jaws Lathe Chuck Has The Function Of Self Centering With Superior Gripping Force,It Does Not Need To Be Repeatedly Calibrated During Clamping. It Just Needs To Clamp The Workpiece According To Your Needs, Which Is Simple, Fast And Convenient..
【Applicable Workpiece Size】：The Package Contains A Set Of Round Jaws. Inner Jaws Tighten Around Workpieces Varying From 1" To 1.9". Outer Jaws Spread Inside Of Workpieces With Pilot Holes Ranging From 1.4" To 2.5". Comes With A Set Of Accessories,Including 1 X Chuck Key, 1 X Screw Chuck Stud, And 1 X Wrench To Facilitate Your Work..
Features
- EXCELLENT QUALITY The 2.75inch self-Centering keyed lathe chuck body is made of high-quality steel. The sturdy chuck can withstand high-intensity work without damage. Will greatly extend the service life of the chuck.
- APPLICABLE WORKPIECE SIZE The package contains a set of round jaws. Inner jaws tighten around workpieces varying from 1 to 1.9. Outer jaws spread inside of workpieces with pilot holes ranging from 1.4 to 2.5. Comes with a set of accessories,including 1 x chuck key, 1 x Screw Chuck Stud, and 1 x wrench to facilitate your work.
- FREE ACCESSORIES We will provide you with a set of installation tools. These can help you better install the chuck on the lathe.The wood screw and sliding T-handle chuck key provides additional grip strength help you hold the workpiece better in the process.
- HIGH PERFORMANCE JAWS The 4 jaws lathe chuck has the function of self centering with superior gripping force,it does not need to be repeatedly calibrated during clamping. It just needs to clamp the workpiece according to your needs, which is simple, fast and convenient.
- APPLICATION :This complete lathe chuck set includes a precision jaw and a set of installation tools, which bring much convenience to your operation. The chuck has 1 x 8 TPI Thread .Applicable to hold bowls, spindles, and other bulky wood lathe projects.
- See more on Amazon...
Brand: PNBO | Manufacturer: PNBO
See On Amazon #18
2pc Upgraded Wire Stripper Blade,Replacement Blade for Copper Wire Stripping Machine
Asin: B0BQTZN231 | Model: PINBO9 | PartNumber: PINBO9 | Ean: 0727198924351 | UPC: 727198924351
【Precision &Sharp】-The Cutting Edge Is Ground By High Precision Grinding Machine,Which Ensure Its Accuracy.Hardened Cable Stripper Blade Edge Will Easily Remove The Protective Layer Of All Wires.It Is Perfectly Suitable To Cut Wires Of Different Materials Like Plastic And Rubber Insulation Layers..
【Precision Machining】- Wire Stripping Blade Precision Machined To Ensure The Hardness And Sharpness Of The Blade. The Cutting Edge Is Treated, Sharp, And Not Easy To Rust..
【Durable】-This Wire Stripper Blade Is Made Of High Quality Alloy,Greatly Extend Its Service Life..
【Upgrade Highlight】The Wire Stripping Machine Blades Are Designed With Two-Way Bearings,Which Can Be Reused.So It Does Not Need To Change The Bearing When Replace The Blade..
Features
- BLADE PARAMETER - Blade outer diameter 50mm/1.96in,bearing inner diameter 12mm/0.47in, Thickness 12mm/0.47in.Suitable for most manual or wire stripping machine replacement blades.
- UPGRADE HIGHLIGHT The wire stripping machine blades are designed with two-way bearings,which can be reused.So it does not need to change the bearing when replace the blade.
- PRECISION &SHARP -The cutting edge is ground by high precision grinding machine,which ensure its accuracy.Hardened cable stripper blade edge will easily remove the protective layer of all wires.It is perfectly suitable to cut wires of different materials like plastic and rubber insulation layers.
- DURABLE -This wire stripper blade is made of high quality alloy,greatly extend its service life.
- Precision Machining - Wire stripping blade precision machined to ensure the hardness and sharpness of the blade. The cutting edge is treated, sharp, and not easy to rust.
- See more on Amazon...
Brand: PNBO | Manufacturer: PNBO
See On Amazon #19
PNBO 3-Inch Lathe Chuck,Reversible 3-Jaw Mini Lathe Chuck,Self Centering Wood Turning Chuck with MT-1 and MT-2 Arbor Shank
Asin: B094FST6Y5 | Model: 0 | PartNumber: 0 | Ean: 0657573973585 | UPC: 657573973585
【Free Accessories】：We Will Provide You With A Set Of Installation Tools. These Two Tightening Levers Can Help You Tighten The Chuck For Better Clamping Your Workpiece.Supplied Mt1 And Mt2 Shank Compatible With Lathe That Accepts Tapered Mt-1 Or Mt-2 Spindles..
【Wide Application】- The Self-Centering Scroll Type Chuck For A Variety Of Parts Such As Hanging Shafts, Disks, Equilateral Triangles, Etc..
【Fast Clamping Speed】-This 3Inch Self-Centering 3-Jaw Chuck Does Not Need To Be Repeatedly Calibrated During Clamping. It Just Needs To Clamp The Workpiece According To Your Needs, Which Is Simple, Fast And Convenient..
【Applicable Workpiece Size】：Internal Jaw Clamping Range:3-48Mm.External Jaw Clamping Range: 31-90Mm..
Features
- EXCELLENT QUALITY The well-designed 3inch 3-jaw mini lathe chuck body is made of high-quality steel. The sturdy chuck can withstand high-intensity work without damage. Will greatly extend the service life of the chuck.
- APPLICABLE WORKPIECE SIZE Internal Jaw Clamping Range:3-48mm.External Jaw Clamping Range: 31-90mm.
- FREE ACCESSORIES We will provide you with a set of installation tools. These two tightening levers can help you tighten the chuck for better clamping your workpiece.Supplied MT1 and MT2 shank compatible with lathe that accepts tapered MT-1 or MT-2 Spindles.
- FAST CLAMPING SPEED -This 3inch self-centering 3-Jaw chuck does not need to be repeatedly calibrated during clamping. It just needs to clamp the workpiece according to your needs, which is simple, fast and convenient.
- WIDE APPLICATION - The self-centering scroll type chuck for a variety of parts such as hanging shafts, disks, equilateral triangles, etc.
- See more on Amazon...
Brand: PNBO | Manufacturer: PNBO
See On Amazon #20
PNBO 1/32" - 1/2" Drill Chuck with #1 (MT1-JT33) Morse Taper Arbor(1/4-20tpi) Heavy Duty Drill Chuck with Chuck Key,for Drill Press
Asin: B09XTMZ7JY | Model: 1MT | PartNumber: 1MT
【Pertect Design】-The 3-Jaw Of Drill Chuck Provides Strong Grip And Anti Slipping.High Accuracy And Precision Design.Accuracy: 0.005".
【Wide Application】- Great For Holding Drill Bits, Small Turnings, Dowels, Pen Mandrel Shafts, And Much More..
【Durable Construction】- The Drill Chuck Is Made Of Higt Garbonsteel.It Anti Corrosion And Anti Rust.Surface Reinforcement Treatment Makes It More Durable And Increases Its Bearing Capacity..
【 Morse Taper Arbor】-The Drill Chuck Can Be Installed On The Headstock Or Tailstock Of A Lathe That Accepts #1 (Mt1-Jt33) Accessories..
Features
- CLAMPING CAPACITY -The Drill Chuck clamp range from 1/32" to 1/2" is designed for meet various drilling bits needs.
- MORSE TAPER ARBOR -The drill chuck can be installed on the headstock or tailstock of a lathe that accepts #1 (MT1-JT33) accessories.
- PERTECT DESIGN -The 3-Jaw of drill chuck provides strong grip and anti slipping.High accuracy and precision design.Accuracy: 0.005
- DURABLE CONSTRUCTION - The drill chuck is made of higt garbonsteel.It anti corrosion and anti rust.Surface reinforcement treatment makes it more durable and increases its bearing capacity.
- WIDE APPLICATION - Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more.
- See more on Amazon...
Brand: PNBO | Manufacturer: PNBO
Dimensions: 3.10 x 5.10 x 3.10 Inches
See On Amazon #21
PNBO 1/32" - 1/2" Drill Chuck with #2 (MT2-JT33) Morse Taper Arbor 1/4-20tpi) Heavy Duty Drill Chuck with Chuck Key, for Drill Press
Asin: B09XTPCY25 | Model: 2MT | PartNumber: 2MT
【Pertect Design】-The 3-Jaw Of Drill Chuck Provides Strong Grip And Anti Slipping.High Accuracy And Precision Design.Accuracy: 0.005".
【Wide Application】- Great For Holding Drill Bits, Small Turnings, Dowels, Pen Mandrel Shafts, And Much More..
【Durable Construction】- The Drill Chuck Is Made Of Higt Garbonsteel.It Anti Corrosion And Anti Rust.Surface Reinforcement Treatment Makes It More Durable And Increases Its Bearing Capacity..
【 Morse Taper Arbor】-The Drill Chuck Can Be Installed On The Headstock Or Tailstock Of A Lathe That Accepts #2 (Mt2-Jt33) Accessories..
Features
- CLAMPING CAPACITY -The Drill Chuck clamp range from 1/32" to 1/2" is designed for meet various drilling bits needs.
- MORSE TAPER ARBOR -The drill chuck can be installed on the headstock or tailstock of a lathe that accepts #2 (MT2-JT33) accessories.
- PERTECT DESIGN -The 3-Jaw of drill chuck provides strong grip and anti slipping.High accuracy and precision design.Accuracy: 0.005
- DURABLE CONSTRUCTION - The drill chuck is made of higt garbonsteel.It anti corrosion and anti rust.Surface reinforcement treatment makes it more durable and increases its bearing capacity.
- WIDE APPLICATION - Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more.
- See more on Amazon...
Brand: PNBO | Manufacturer: PNBO
Dimensions: 3.10 x 5.10 x 3.10 inches
See On Amazon #22
PNBO 1/32"- 5/8" Drill Chuck MT2 Shank, with #2 Morse Taper Arbor (B18),Heavy Duty Drill Chuck with K32 Chuck Key,for Drill Press
Asin: B09XTT8LSW | Model: 1-16mm B18 MT2 | PartNumber: 1-16mm B18 MT2
【Pertect Design】-The 3-Jaw Of Drill Chuck Provides Strong Grip And Anti Slipping.High Accuracy And Precision Design.Accuracy: 0.005".
【Wide Application】- Great For Holding Drill Bits, Small Turnings, Dowels, Pen Mandrel Shafts, And Much More..
【Durable Construction】- The Drill Chuck Is Made Of Higt Garbonsteel.It Anti Corrosion And Anti Rust.Surface Reinforcement Treatment Makes It More Durable And Increases Its Bearing Capacity..
【 Morse Taper Arbor】-The Drill Chuck Can Be Installed On The Headstock Or Tailstock Of A Lathe That Accepts #2Mt Accessories..
Features
- CLAMPING CAPACITY -The Drill Chuck clamp range from 1/32"- 5/8" is designed for meet various drilling bits needs.
- MORSE TAPER ARBOR -The drill chuck can be installed on the headstock or tailstock of a lathe that accepts #2MT accessories.
- PERTECT DESIGN -The 3-Jaw of drill chuck provides strong grip and anti slipping.High accuracy and precision design.Accuracy: 0.005
- DURABLE CONSTRUCTION - The drill chuck is made of higt garbonsteel.It anti corrosion and anti rust.Surface reinforcement treatment makes it more durable and increases its bearing capacity.
- WIDE APPLICATION - Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more.
- See more on Amazon...
Brand: PNBO | Manufacturer: PNBO
Dimensions: 3.10 x 5.10 x 3.10 Inches
See On Amazon #23
PNBO 3-Inch Lathe Chuck,Reversible 4-Jaw Mini Lathe Chuck,Self Centering Wood Turning Chuck with 2 Tightening Levers,1-Inch by 8 TPI
Asin: B094FTWZLP | Model: 0 | PartNumber: 0 | Ean: 0657573974421 | UPC: 657573974421
【Free Accessories】：We Will Provide You With A Set Of Installation Tools. These Two Tightening Levers Can Help You Tighten The Chuck For Better Clamping Your Workpiece..
【Wide Application】- Applicable To The General Lathe, Grinder, Milling Machine, Drilling Machine And Machine Accessories, Woodworking Machinery Accessories And Other Machine Tools And Accessories..
【Fast Clamping Speed】-This 3Inch Self-Centering 4-Jaw Chuck Does Not Need To Be Repeatedly Calibrated During Clamping. It Just Needs To Clamp The Workpiece According To Your Needs, Which Is Simple, Fast And Convenient..
【Applicable Workpiece Size】：Internal Jaw Clamping Range:3-44Mm.External Jaw Clamping Range: 39-85Mm..
Features
- EXCELLENT QUALITY The well-designed 3inch 4-jaw mini lathe chuck body is made of high-quality steel. The sturdy chuck can withstand high-intensity work without damage. Will greatly extend the service life of the chuck.
- APPLICABLE WORKPIECE SIZE Internal Jaw Clamping Range:3-44mm.External Jaw Clamping Range: 39-85mm.
- FREE ACCESSORIES We will provide you with a set of installation tools. These two tightening levers can help you tighten the chuck for better clamping your workpiece.
- FAST CLAMPING SPEED -This 3inch self-centering 4-Jaw chuck does not need to be repeatedly calibrated during clamping. It just needs to clamp the workpiece according to your needs, which is simple, fast and convenient.
- WIDE APPLICATION - Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories.
- See more on Amazon...
Brand: PNBO | Manufacturer: PNBO
See On Amazon #24
PNBO 1/32"-5/8" Drill Chuck with MT2 Shank (MT2-JT33),Morse Taper No. 2, Heavy Duty Drill Chuck with Chuck Key, for Drill Press
Asin: B09XTQFWWZ | Model: 1-16mm JT33 MT2 | PartNumber: 1-16mm JT33 MT2
【Pertect Design】-The 3-Jaw Of Drill Chuck Provides Strong Grip And Anti Slipping.High Accuracy And Precision Design.Accuracy: 0.005".
【Wide Application】- Great For Holding Drill Bits, Small Turnings, Dowels, Pen Mandrel Shafts, And Much More..
【Durable Construction】- The Drill Chuck Is Made Of Higt Garbonsteel.It Anti Corrosion And Anti Rust.Surface Reinforcement Treatment Makes It More Durable And Increases Its Bearing Capacity..
【 Morse Taper Arbor】-The Drill Chuck Can Be Installed On The Headstock Or Tailstock Of A Lathe That Accepts #2 (Mt2-Jt33) Accessories..
Features
- CLAMPING CAPACITY -The Drill Chuck clamp range from 1/32"- 5/8" is designed for meet various drilling bits needs.
- MORSE TAPER ARBOR -The drill chuck can be installed on the headstock or tailstock of a lathe that accepts #2 (MT2-JT33) accessories.
- PERTECT DESIGN -The 3-Jaw of drill chuck provides strong grip and anti slipping.High accuracy and precision design.Accuracy: 0.005
- DURABLE CONSTRUCTION - The drill chuck is made of higt garbonsteel.It anti corrosion and anti rust.Surface reinforcement treatment makes it more durable and increases its bearing capacity.
- WIDE APPLICATION - Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more.
- See more on Amazon...
Brand: PNBO | Manufacturer: PNBO
Dimensions: 3.10 x 5.10 x 3.10 Inches
Amazon Price: $24.99 | as of 04/28/2024
(6:42pm pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon