Shorpioen - Buying Guide
Last Updated: 05/14/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Shorpioen 25-Pack 1/4 x 1 Sidewalk Bolt Stainless Steel BC-SWBSS14201
Asin: B07ND1PW3G | Model: BC-SWBSS14201 | PartNumber: BC-SWBSS14201
The Bolt Is 1/4-20 (Thread Is 20) And The Diameter Of The Head Is 3/4".
Country Of Origin: Taiwan.
These Stainless Steel, Combo-Drive Sidewalk Bolts Measure 1/4" In Diameter X 1" In Length And Come In 25 Pieces Per Retail Package.
Hurricane Bolts Can Also Be Referred To As Sidewalk Bolts.
Features
- Low-profile head can remain in place when panels are down
- Hurricane bolts can also be referred to as sidewalk bolts
- The bolt is 1/4-20 (thread is 20) and the diameter of the head is 3/4
- These stainless steel, combo-drive sidewalk bolts measure 1/4 in diameter x 1 in length and come in 25 pieces per retail package
- Country of Origin: Taiwan
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
Weight: 1.00 Pounds
See On Amazon #2
Shorpioen 100-Pack 6 x 1 1/2 Phillips Bugle Head Coarse Thread Drywall Screw Black Phosphate Particle Board BC-0624CPG
Asin: B08WPHRM49
Aisi 1018 Or Equivalent Steel.
Features
- Coarse thread Drywall--Sharp point: For attaching drywall to wood studs or to 25 gage metal studs. Particle Board Screw: Designed specifically for use in dense woods, especially man-made types such as chipboard and particle board
- AISI 1018 or equivalent steel
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
See On Amazon #3
Shorpioen 200-Pack 6 x 1 1/4 Phillips Bugle Head Coarse Thread Drywall Screw Black Phosphate Particle Board BC-0620CPG
Asin: B07WHT2Z8Z | Model: BC-0620CPG-200 | PartNumber: BC-0620CPG-200
Aisi 1018 Or Equivalent Steel.
Features
- Coarse thread Drywall--Sharp point: For attaching drywall to wood studs or to 25 gage metal studs. Particle Board Screw: Designed specifically for use in dense woods, especially man-made types such as chipboard and particle board
- AISI 1018 or equivalent steel
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
See On Amazon #4
Shorpioen 100-Pack #10 x 3/4 Unslotted Hex Washer Self Drilling White 5/16 Head BC-1012KWW516
Asin: B08KRJ78NL
Mixed Fba Stock: Serrated Self Drilling Screw & Non-Serrated Self Drill Screw. Therefore, Be Aware You Might Receive Either Or When Placing The Order..
For Use In Steel, Sheet Metal, And Attaches Metal Or Steel To Metal Or Sheet Metal Steel. Installed With 5/16" Hex Driver.
Features
- Hex Washer Head Sheet Metal Screws are known to be convenient and versatile. Great to have while working with sheet metal environment. Suitable for indoor and outdoor applications
- For use in Steel, Sheet Metal, and attaches Metal or Steel to Metal or Sheet Metal Steel. Installed with 5/16 Hex Driver
- Mixed FBA Stock: Serrated Self Drilling Screw & Non-Serrated Self Drill Screw. Therefore, be aware you might receive either or when placing the order.
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
See On Amazon #5
Shorpioen 100-Pack 1/4-14 x 3/4 Unslotted Indented Hex Washer Self Drill Screw Zinc BC-1412KW
Asin: B07MR6LY6N | Model: BC-1412KW-100 | PartNumber: BC-1412KW-100
Convenience: Hex Washer Head Sheet Metal Screws Are Known To Be Convenient And Versatile. Great To Have While Working With Sheet Metal Environment. Suitable For Indoor And Outdoor Applications.
A Tapping Screw With Spaced Threads And A Drill Point Which Drills Its Own Hole.
May Be Used To Attach Plywood, Soft Woods Or Composition Board To Metal, Or Attach Metal To Metal..
Rust Resistant: Zinc Plating Provides An Excellent Corrosion Resistant Shell For A Long Lasting Cost Effective Fastener.
Features
- HIGH QUALITY ZINC PLATED STEEL: Made of 100% high quality durable steel with hard zinc plating, built to last years with no wear and tear
- RUST RESISTANT: Zinc Plating provides an excellent corrosion resistant shell for a long lasting cost effective fastener
- CONVENIENCE: Hex Washer Head Sheet Metal Screws are known to be convenient and versatile. Great to have while working with sheet metal environment. Suitable for indoor and outdoor applications
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- A tapping screw with spaced threads and a drill point which drills its own hole
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
Weight: 1.22 Pounds
See On Amazon #6
Shorpioen 100-Pack 1/4 x 1-3/4 Concrete Screw Hex Flanged White * Drill Bit NOT Included * BC-1428CNHFW
Asin: B079DF49KK | Model: BC-1428CNHFW | PartNumber: BC-1428CNHFW
Some Applications Include Anchoring The Following To Masonry: Hurricane Shutters, Electrical Junction Boxes, Wooden Beams, Plywood, Exterior Insulation, Metal Flashing, Thresholds. The Ruspert Finish Is A Ceramic Coating That Also Allows These Fasteners To Be Used In Pressure-Treated Lumber. Hole Should Be Of A Depth Equal To The Required Embedment Plus 1/2”..
Check The Item Description To See If A Drill Is Included As Well..
Concrete Screws Should Be Installed A Minimum Of Ten Inch Apart Between Each Other. They Have An Advantage Over Most Other Types Of Masonry Anchors In That They Can Be Installed Close To The Edge Of The Material In Which They Are Installed..
An Externally Threaded, Hardened Screw With A Double Lead, Consisting Of Alternating Raised And Lowered Threads With Notches Cut Into The Raised Threads, And A Gimlet-Shaped, Nail-Type Point. Cuts Its Own Threads When Used In Concrete, Block Or Brick. Eliminates The Need For An Anchor When Used In Light Or Medium-Duty Applications. When Used In Concrete, It Can Be Removed And Re-Driven Into The Same Hole. Special Carbide Bits Are Recommended For Driving Concrete Screws Into Masonry..
Features
- Florida Standard. The gimlet point allows for superior penetrating into hard materials. Great for anchoring items to concrete, brick, block, wood or other masonry materials. White ceramic coating exceeds 500/hrs salt spray resistance
- An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a gimlet-shaped, nail-type point. Cuts its own threads when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry.
- Some applications include anchoring the following to masonry: hurricane shutters, electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Hole should be of a depth equal to the required embedment plus 1/2 .
- Concrete screws should be installed a minimum of ten inch apart between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of the material in which they are installed.
- Check the Item Description to see if a drill is included as well.
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
Weight: 1.00 Pounds
See On Amazon #7
Shorpioen 10-Pack 3/8-16 NE Nylon Insert Hex Lock Nut 18 8 Stainless Steel BC-37NS188
Asin: B07SFY95ST | Model: BC- 37NS188-10 | PartNumber: BC- 37NS188-10
Stainless: 18-8: Aisi 303 Or Equivalent Stainless Steel. 316: Type 316 Stainless Steel.
Steel: #2 Through 5/8” -- Aisi 1008 - 1010 Or Equivalent Steel; 3/4 Through 1-1/2”-- Aisi C1117 Or Equivalent Steel.
Features
- Designed to be used with like-material machine screws and bolts. It is able to be reused more times than a two-way reversible nut. Steel nylon insert stop nuts are less expensive than grade-C automation lock nuts. However, nylon will begin to deteriorate at temperatures from 150 -350 F
- Steel: #2 through 5/8 -- AISI 1008 - 1010 or equivalent steel; 3/4 through 1-1/2 -- AISI C1117 or equivalent steel
- Stainless: 18-8: AISI 303 or equivalent stainless steel. 316: Type 316 stainless steel
- See more on Amazon...
Brand: Shorpioen LLC | Manufacturer: Shorpioen LLC
See On Amazon #8
2.5X2.0X1.5 Tension Bushing Type 3 6150 Spring Steel Through Hardened and Tempered Plain (Pack Qty 2) BC-25020024BT3P by Shorpioen
Asin: B08VRG2C4Y | Model: BC-25020024BT3P | PartNumber: BC-25020024BT3P
They Resist Wear, Maintain Performace In Harsh Environments And Withstand Temperature Up To 350°C. Among Their Uses Include Agricultural Equipment, Commercial Lawn Equipment, Conveyors, Earth Movers, Heavy Trucks, Material Handling Equipment, Mining And R.
The Bushing Protects The Bore Or Shaft In Which It Is Installed. Typically, They Are Pressed Into The Rod Or Clevis End Of Hydraulic Cylinders, Pivot Points For Equipment Attachments And Other Moving Parts. The Elasticity Of The Part And The Chamfered End.
Features
- A cylindrical machine part with a wavy-shaped opening on on side. The openings at both ends have chamfered edges. The bushing is made from a high carbon steel that provides sufficient elasticity to provide a properly tight radical fit
- The bushing protects the bore or shaft in which it is installed. Typically, they are pressed into the rod or clevis end of hydraulic cylinders, pivot points for equipment attachments and other moving parts. The elasticity of the part and the chamfered end
- They resist wear, maintain performace in harsh environments and withstand temperature up to 350 C. Among their uses include agricultural equipment, commercial lawn equipment, conveyors, earth movers, heavy trucks, material handling equipment, mining and r
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
Weight: 1.38 Pounds
See On Amazon #9
2.5X2.0X2.5 Tension Bushing Type 3 6150 Spring Steel Through Hardened and Tempered Plain (Pack Qty 2) BC-25020040BT3P by Shorpioen
Asin: B08VRBQGXL | Model: BC-25020040BT3P | PartNumber: BC-25020040BT3P
They Resist Wear, Maintain Performace In Harsh Environments And Withstand Temperature Up To 350°C. Among Their Uses Include Agricultural Equipment, Commercial Lawn Equipment, Conveyors, Earth Movers, Heavy Trucks, Material Handling Equipment, Mining And R.
The Bushing Protects The Bore Or Shaft In Which It Is Installed. Typically, They Are Pressed Into The Rod Or Clevis End Of Hydraulic Cylinders, Pivot Points For Equipment Attachments And Other Moving Parts. The Elasticity Of The Part And The Chamfered End.
Features
- A cylindrical machine part with a wavy-shaped opening on on side. The openings at both ends have chamfered edges. The bushing is made from a high carbon steel that provides sufficient elasticity to provide a properly tight radical fit
- The bushing protects the bore or shaft in which it is installed. Typically, they are pressed into the rod or clevis end of hydraulic cylinders, pivot points for equipment attachments and other moving parts. The elasticity of the part and the chamfered end
- They resist wear, maintain performace in harsh environments and withstand temperature up to 350 C. Among their uses include agricultural equipment, commercial lawn equipment, conveyors, earth movers, heavy trucks, material handling equipment, mining and r
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
Weight: 2.32 Pounds
See On Amazon #10
1.75X1.5X.75 Tension Bushing Type 3 6150 Spring Steel Through Hardened and Tempered Plain (Pack Qty 15) BC-17515012BT3P by Shorpioen
Asin: B08VR8XV2H | Model: BC-17515012BT3P | PartNumber: BC-17515012BT3P
They Resist Wear, Maintain Performace In Harsh Environments And Withstand Temperature Up To 350°C. Among Their Uses Include Agricultural Equipment, Commercial Lawn Equipment, Conveyors, Earth Movers, Heavy Trucks, Material Handling Equipment, Mining And R.
The Bushing Protects The Bore Or Shaft In Which It Is Installed. Typically, They Are Pressed Into The Rod Or Clevis End Of Hydraulic Cylinders, Pivot Points For Equipment Attachments And Other Moving Parts. The Elasticity Of The Part And The Chamfered End.
Features
- A cylindrical machine part with a wavy-shaped opening on on side. The openings at both ends have chamfered edges. The bushing is made from a high carbon steel that provides sufficient elasticity to provide a properly tight radical fit
- The bushing protects the bore or shaft in which it is installed. Typically, they are pressed into the rod or clevis end of hydraulic cylinders, pivot points for equipment attachments and other moving parts. The elasticity of the part and the chamfered end
- They resist wear, maintain performace in harsh environments and withstand temperature up to 350 C. Among their uses include agricultural equipment, commercial lawn equipment, conveyors, earth movers, heavy trucks, material handling equipment, mining and r
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
Weight: 1.78 Pounds
See On Amazon #11
3/8X4 Combination Round Head Toggle Bolt Zinc (Pack Qty 25) BC-3764TBCR by Shorpioen
Asin: B08VRCQT5J | Model: BC-3764TBCR | PartNumber: BC-3764TBCR
Ultimate Load Capacities For Toggle Bolts In Various Materials Are Listed In The Above Table. The Suggested Safe Working Load Is 1/4 The Loads Listed Here.
Wing Body: Aisi 1008-1010 Or Equivalent Cold Rolled Steel. Trunnion Nut: 1/4 Thr 3/8": Aisi 1010 Steel: 1/2": Zamac Alloy. Screw: Carbon Steel.
Features
- Toggle bolts are light-duty anchors for use in hollow block or gypsum wallboard. They spread the load over a larger area and are more temperature resistant than other hollow wall anchors. They are single-use anchors
- Wing Body: AISI 1008-1010 or equivalent cold rolled steel. Trunnion Nut: 1/4 thr 3/8: AISI 1010 steel: 1/2: Zamac alloy. Screw: carbon steel
- Ultimate load capacities for toggle bolts in various materials are listed in the above table. The suggested safe working load is 1/4 the loads listed here
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
See On Amazon #12
Shorpioen 100-Pack 6 x 1 1/4 Phillips Bugle Head Coarse Thread Drywall Screw Black Phosphate Particle Board BC-0620CPG
Asin: B07WJVKP1K | Model: BC-0620CPG-100 | PartNumber: BC-0620CPG-100
Aisi 1018 Or Equivalent Steel.
Features
- Coarse thread Drywall--Sharp point: For attaching drywall to wood studs or to 25 gage metal studs. Particle Board Screw: Designed specifically for use in dense woods, especially man-made types such as chipboard and particle board
- AISI 1018 or equivalent steel
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
See On Amazon #13
3/8X6 Combination Round Head Toggle Bolt Zinc (Pack Qty 25) BC-3796TBCR by Shorpioen
Asin: B08VQQQK41 | Model: BC-3796TBCR | PartNumber: BC-3796TBCR
Ultimate Load Capacities For Toggle Bolts In Various Materials Are Listed In The Above Table. The Suggested Safe Working Load Is 1/4 The Loads Listed Here.
Wing Body: Aisi 1008-1010 Or Equivalent Cold Rolled Steel. Trunnion Nut: 1/4 Thr 3/8": Aisi 1010 Steel: 1/2": Zamac Alloy. Screw: Carbon Steel.
Features
- Toggle bolts are light-duty anchors for use in hollow block or gypsum wallboard. They spread the load over a larger area and are more temperature resistant than other hollow wall anchors. They are single-use anchors
- Wing Body: AISI 1008-1010 or equivalent cold rolled steel. Trunnion Nut: 1/4 thr 3/8: AISI 1010 steel: 1/2: Zamac alloy. Screw: carbon steel
- Ultimate load capacities for toggle bolts in various materials are listed in the above table. The suggested safe working load is 1/4 the loads listed here
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
See On Amazon #14
Shorpioen 100-Pack #8-18 x 1 1/4 Phillips Modified Truss Head Full Thread Self Drilling Screw Black Phosphate BC-0820KPMB
Asin: B08NW8X6BG | Model: BC-0820KPMB-100 | PartNumber: BC-0820KPMB-100
Features
- Common usage is to attach wire or metal lathe to metal studs of a thickness between 12 - 20 gauge. The head design offers low clearance and an extra large bearing surface. The recommended drive speed for installation is 2500 rpm. AISI 1016 - 1022 or equivalent steel
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
See On Amazon #15
Shorpioen 10-Pack 1/4 x 3 1/4 Phillips Flat Concrete Screw No Drill Bit Blue Perma Seal BC-1452CNPF
Asin: B07YSV7JJ9 | Model: BC-1452CNPF- 10 | PartNumber: BC-1452CNPF- 10
Some Applications Include Anchoring The Following To Masonry: Electrical Junction Boxes, Wooden Beams, Plywood, Exterior Insulation, Metal Flashing, Thresholds..
Special Carbide Bits Are Recommended For Driving Concrete Screws Into Masonry. Not Included.
The Ruspert Finish Is A Ceramic Coating That Also Allows These Fasteners To Be Used In Pressure-Treated Lumber..
Cuts Its Own Threads And When Used In Concrete, Block Or Brick. Eliminates The Need For An Anchor When Used In Light Or Medium-Duty Applications. When Used In Concrete, It Can Be Removed And Re-Driven Into The Same Hole..
Features
- An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point.
- Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole.
- Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds.
- The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber.
- Special carbide bits are recommended for driving concrete screws into masonry. Not Included
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
See On Amazon #16
Shorpioen 10-Pack 5/16-18 x 3/4 Carriage Bolt 18 8 Stainless Steel Fully Threaded BC-3112C188
Asin: B07RDXV28R | Model: BC-3112C188 | PartNumber: BC-3112C188
18-8 Stainless Steel Carriage Bolts Are Made From One Of The Following Austenitic Alloys: 302 Hq, 303, 303Se, 304, And Xm7, All Of Which Are Characterized As Having A Chromium Content Of 17-19% And Nickel Content Of 8-10%..
The Same Design Advantages As A Low Carbon Carriage Bolt But For Use In Environments Requiring General Atmospheric Corrosion Resistance..
Features
- Round head bolt with a square neck under the head, and a unified thread pitch, made from austenitic alloy stainless steel.
- The same design advantages as a low carbon carriage bolt but for use in environments requiring general atmospheric corrosion resistance.
- 18-8 stainless steel carriage bolts are made from one of the following austenitic alloys: 302 HQ, 303, 303Se, 304, and XM7, all of which are characterized as having a chromium content of 17-19% and nickel content of 8-10%.
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
Weight: 0.20 Pounds
See On Amazon #17
3/16X5 Combination Round Head Toggle Bolt Zinc (Pack Qty 50) BC-1080TBCR by Shorpioen
Asin: B08VR1LKKN | Model: BC-1080TBCR | PartNumber: BC-1080TBCR
Ultimate Load Capacities For Toggle Bolts In Various Materials Are Listed In The Above Table. The Suggested Safe Working Load Is 1/4 The Loads Listed Here.
Wing Body: Aisi 1008-1010 Or Equivalent Cold Rolled Steel. Trunnion Nut: 1/4 Thr 3/8": Aisi 1010 Steel: 1/2": Zamac Alloy. Screw: Carbon Steel.
Features
- Toggle bolts are light-duty anchors for use in hollow block or gypsum wallboard. They spread the load over a larger area and are more temperature resistant than other hollow wall anchors. They are single-use anchors
- Wing Body: AISI 1008-1010 or equivalent cold rolled steel. Trunnion Nut: 1/4 thr 3/8: AISI 1010 steel: 1/2: Zamac alloy. Screw: carbon steel
- Ultimate load capacities for toggle bolts in various materials are listed in the above table. The suggested safe working load is 1/4 the loads listed here
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
Weight: 2.25 pounds
See On Amazon #18
Shorpioen 50-Pack 3/16 x 3 Toggle Bolt Zinc BC-1048TBCR
Asin: B01MU11A64 | Model: BC-1048TBCR | PartNumber: BC-1048TBCR
Features A Slotted/Phillips Round Head Machine Screw, And Comes With Spring-Action Wings..
50 Pieces Per Package..
Pre-Drilled Hole Required For Installation. They Are Single-Use Anchors..
They Spread The Load Over A Larger Area And Are More Temperature Resistant Than Other Hollow Wall Anchors.
Features
- Toggle bolts are light-duty anchors for use in hollow block or gypsum wallboard.
- They spread the load over a larger area and are more temperature resistant than other hollow wall anchors
- Features a slotted/phillips round head machine screw, and comes with spring-action wings.
- Pre-drilled hole required for installation. They are single-use anchors.
- 50 pieces per package.
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
See On Amazon #19
Shorpioen 100-Pack #6 x 5/8" Nickel Plated Flat Head Screws - #2 Philips Drive - Ideal for Installation of Cabinet Hinge & Drawer Slides BC-06C10DPFDNCC
Asin: B07L8JY7CG | Model: BC-06C10DPFDNCC | PartNumber: BC-06C10DPFDNCC
Rockwell C 45 Minimim.
C1022 Case-Hardened Steel.
Features
- Ideal for attaching hinges into soft woods. The deeper thread design offers greater resistance to pull-out forces
- C1022 case-hardened steel
- Rockwell C 45 minimim
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
See On Amazon #20
3/16X6 Combination Round Head Toggle Bolt Zinc (Pack Qty 50) BC-1096TBCR by Shorpioen
Asin: B08VRKLGDD | Model: BC-1096TBCR | PartNumber: BC-1096TBCR
Ultimate Load Capacities For Toggle Bolts In Various Materials Are Listed In The Above Table. The Suggested Safe Working Load Is 1/4 The Loads Listed Here.
Wing Body: Aisi 1008-1010 Or Equivalent Cold Rolled Steel. Trunnion Nut: 1/4 Thr 3/8": Aisi 1010 Steel: 1/2": Zamac Alloy. Screw: Carbon Steel.
Features
- Toggle bolts are light-duty anchors for use in hollow block or gypsum wallboard. They spread the load over a larger area and are more temperature resistant than other hollow wall anchors. They are single-use anchors
- Wing Body: AISI 1008-1010 or equivalent cold rolled steel. Trunnion Nut: 1/4 thr 3/8: AISI 1010 steel: 1/2: Zamac alloy. Screw: carbon steel
- Ultimate load capacities for toggle bolts in various materials are listed in the above table. The suggested safe working load is 1/4 the loads listed here
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
Weight: 2.50 Pounds
See On Amazon #21
5/16-18X1 1/2 Elevator Bolt Zinc (Pack Qty 200) BC-3124BE by Shorpioen
Asin: B08VRDTK7Q | Model: BC-3124BE | PartNumber: BC-3124BE
Grade-36: Low Carbon Steel Shall Conform As Follows: Carbon: 0.29% Max; Manganese: (Optional); Phosphorus: 0.05% Max; Sulfur: 0.06% Max; Copper (When Specified): 0.18% Min.
Features
- Designed to anchor structural supports to concrete foundations. The bent portion (or leg) of the bolt is that which is embedded into concrete to create greater resistance to forces pulling away from the concrete foundation
- Grade-36: Low carbon steel shall conform as follows: Carbon: 0.29% max; Manganese: (optional); Phosphorus: 0.05% max; Sulfur: 0.06% max; Copper (when specified): 0.18% min
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
Weight: 9.60 Pounds
See On Amazon #22
5/32X.046-.250 Multi Grip Dome Rivet Zinc (Pack Qty 6,000) BC-D-0512Y by Shorpioen
Asin: B08VRGHQ46 | Model: BC-D-0512Y | PartNumber: BC-D-0512Y
Rivets Shall Have Ultimate Shear Loads Not Less Than The Minimum Ultimate Shear Loads Specified For The Applicable Size Given In The Above Table..
Rivet: Aluminum Alloy 5251 Or Equivalent Alloy. Mandrel: Low Carbon Steel With A Choice Of Coating: Black Phosphate Or Zinc With Yellow Chromate..
Features
- Multi-grip rivets provide maximum clamping action over a full range of material thicknesses while using the same rivet length. This allows flexibility in design, cuts production costs and reduces inventories. Dome heads are used in standard applications which call for maximum clamp-up and hole fill. They should be used when fastening materials with mechanical and physical properties similar to aluminum
- Rivet: Aluminum Alloy 5251 or equivalent alloy. Mandrel: Low carbon steel with a choice of coating: black phosphate or zinc with yellow chromate.
- Rivets shall have ultimate shear loads not less than the minimum ultimate shear loads specified for the applicable size given in the above table.
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
Weight: 22.86 Pounds
See On Amazon #23
Shorpioen 50-Pack #10-24 x 1-1/4 Hex Head Cap Screw 18-8 Stainless Steel BC-1020CH188
Asin: B07N6LV2Y5 | Model: BC-1020CH188 -50 | PartNumber: BC-1020CH188 -50
Length Of A Cap Screw Is Measured From The Underhead Bearing Surface To The Extreme End Of The Screw.
Features
- Economical for use in non-critical applications where the fastener is not subject to extreme temperatures or stree beyond the limits listed
- Length of a cap screw is measured from the underhead bearing surface to the extreme end of the screw
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
Weight: 0.40 Pounds
See On Amazon #24
Shorpioen 100-Pack 1/4 x 1-3/4 Concrete Screw Hex Flanged Bronze No Drill Bit BC-1428CNHFBZ
Asin: B079DG1GZM | Model: BC-1428CNHFBZ | PartNumber: BC-1428CNHFBZ
Some Applications Include Anchoring The Following To Masonry: Electrical Junction Boxes, Wooden Beams, Plywood, Exterior Insulation, Metal Flashing, Thresholds. The Ruspert Finish Is A Ceramic Coating That Also Allows These Fasteners To Be Used In Pressure-Treated Lumber. Hole Should Be Of A Depth Equal To The Required Embedment Plus 1/2”.
Concrete Screws Should Be Installed A Minimum Of Ten Anchor Diameters Between Each Other. They Have An Advantage Over Most Other Types Of Masonry Anchors In That They Can Be Installed Close To The Edge Of The Material In Which They Are Installed..
The Ruspert Finish Is A Ceramic Coating That Also Allows These Fasteners To Be Used In Pressure-Treated Lumber. Check The Item Description To See If A Drill Is Included As Well..
An Externally Threaded, Hardened Screw With A Double Lead, Consisting Of Alternating Raised And Lowered Threads With Notches Cut Into The Raised Threads, And A Diamond-Shaped, Nail-Type Point. Cuts Its Own Threads And When Used In Concrete, Block Or Brick. Eliminates The Need For An Anchor When Used In Light Or Medium-Duty Applications. When Used In Concrete, It Can Be Removed And Re-Driven Into The Same Hole. Special Carbide Bits Are Recommended For Driving Concrete Screws Into Masonry..
Features
- Building Code Approved. The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Blue ceramic coating exceeds 500/hrs salt spray resistance
- An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry.
- Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Hole should be of a depth equal to the required embedment plus 1/2
- The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Check the Item Description to see if a drill is included as well.
- Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of the material in which they are installed.
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
Weight: 1.00 Pounds
See On Amazon #25
1/4-14X1 1/2 Phillips Pan Full Thread Self Drilling Screw 410 Stainless Steel (Pack Qty 500) BC-1424KPP410 by Shorpioen
Asin: B08VQPV8J4 | Model: BC-1424KPP410 | PartNumber: BC-1424KPP410
410 Or 18-8 Stainless Steel.
Minimum Torques Are The Same For Stainless And Steel Self-Drill Screws. Drill Time Is 2.5 Seconds For A 1Mm Thick Plate.
Features
- Type BSD: The 18-8 stainless drill screw offers superior corrosion resistance while the 410 stainless screw will drill through harder material than the 18-8. The hardness of the material to be drilled should be a minimum of 10-20 Rockwell hardness points less than the screw s hardness
- Minimum torques are the same for stainless and steel self-drill screws. Drill time is 2.5 seconds for a 1mm thick plate
- 410 or 18-8 stainless steel
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
Weight: 8.66 Pounds
See On Amazon #26
Shorpioen 7/16 Long Arm Hex Wrench (Pack Qty 10) BC-00438KHL Made in USA
Asin: B08VRHKK4T | Model: BC-00438KHL | PartNumber: BC-00438KHL
Alloy Steel Containing At Least Two Of The Following Elements: Chromium, Nickel, Molybdenum Or Vanadium, In Sufficient Quantity To Assure That The Minimum Surface Hardness Meets The Standards Listed Below.
Features
- Designed to be inserted into a like-sized, hollow recess of a socket screw to manually tighten or loosen the fastener
- Alloy steel containing at least two of the following elements: chromium, nickel, molybdenum or vanadium, in sufficient quantity to assure that the minimum surface hardness meets the standards listed below
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
Weight: 4.50 Pounds
See On Amazon #27
Shorpioen 100-Pack 8-18 x 3/4 Phillips Modified Truss Head Full Thread Self Drill Screw 410 Stainless Steel BC-0812KPM410
Asin: B07R7DBKPL | Model: BC-0812KPM410-100 | PartNumber: BC-0812KPM410-100
Not As Corrosion-Resistant As The 18-8 Variety But Will Drill Through Harder Materials Than The 18-8 Screw. The Same Hardness Gradient Rule Applies: Material Drilled Should Be A Minimum Of 10-20 Rockwell Hardness Points Less Than The Fastener. 410 Stainless.
Offers Superior Corrosion Resistance, But Can Only Be Used In Softer Materials. Hardness Of The Material To Be Drilled Should Be A Minimum Of 10-20 Rockwell Hardness Points Less Than The Fastener. 18-8 Stainless.
Features
- Common usage is to attach wire or metal lathe to metal studs of a thickness between 12 - 20 gauge. The head design offers low clearance and an extra large bearing surface. The recommended drive speed for installation is 2500 rpm. AISI 1016 - 1022 or equivalent steel
- Offers superior corrosion resistance, but can only be used in softer materials. Hardness of the material to be drilled should be a minimum of 10-20 Rockwell hardness points less than the fastener. 18-8 stainless
- Not as corrosion-resistant as the 18-8 variety but will drill through harder materials than the 18-8 screw. The same hardness gradient rule applies: material drilled should be a minimum of 10-20 Rockwell hardness points less than the fastener. 410 stainless
- See more on Amazon...
Brand: Shorpioen LLC | Manufacturer: Shorpioen LLC
See On Amazon #28
8X3/4 Bugle Square Recess Course Thread Type 17 Point Deck Screw 18-8 Stainless Steel (Pack Qty 2,500) BC-08127DQG188 by Shorpioen
Asin: B08W8LCRWJ | Model: BC-08127DQG188 | PartNumber: BC-08127DQG188
18-8 Stainless Steel.
Features
- Designed specifically for joining pieces of pressure treated lumber. Remains resistant to corrosion for approximately twice as long as do dacrotized steel deck screws. The chip cavity assists in the driving process
- 18-8 stainless steel
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
Weight: 7.35 pounds
See On Amazon #29
6-13X7/16 Phillips Flat Undercut Deep Thread Wood Screw Type 17 Full Thread Zinc (Pack Qty 10,000) BC-0607DPU17D by Shorpioen
Asin: B08VRDT4GK | Model: BC-0607DPU17D | PartNumber: BC-0607DPU17D
550 Hv Minimim.
C1018 - C1022 Case-Hardened Steel.
Features
- The deeper thread design offers greater resistance to pull-out forces. Undercut head design is ideal for applications requiring shorter length fasteners as the truncated head allows for greater thread engagement
- C1018 - C1022 case-hardened steel
- 550 HV minimim
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
Weight: 11.25 Pounds
See On Amazon