SpeedFactory - Buying Guide
Last Updated: 04/28/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
YCP Vitara Pistons with Rings for D15 D16 SOHC Engines Civic (75)
Asin: B08R7VVVNT | Model: YCP-75MMKIT | PartNumber: YCP-75MMKIT
- T-6 Heat Treated For Greater Strength..
*Note: We Recommend Installing Pistons With The Arrows Pointing Towards The Flywheel Side Of The Engine For Correct Valve Relief Orientation And Piston Pin Offset..
- Dual Oil Holes Provide Superior Wristpin Lubrication.
- Teflon Coating Provides Increased Piston Life, Improves Cylinder Sealing For Less Blow By And Frees Up More Power From Reduced Friction..
- Highly Resistant To Heat..
- 19Mm Floating Wristpins Fit Aftermarket D16 Forged Connecting Rods..
Features
- - YCP pistons are made from a much stronger casting than OEM pistons (AC8A Grade)
- - 19mm floating wristpins fit aftermarket D16 forged connecting rods.
- - T-6 Heat treated for greater strength.
- - Highly resistant to heat.
- - Dual oil holes provide superior wristpin lubrication
- - Teflon coating provides increased piston life, improves cylinder sealing for less blow by and frees up more power from reduced friction.
- *NOTE: We recommend installing pistons with the arrows pointing towards the flywheel side of the engine for correct valve relief orientation and piston pin offset.
- See more on Amazon...
Brand: SpeedFactory | Manufacturer: SpeedFactory
Dimensions: 8.00 x 8.00 x 8.00 Inches
See On Amazon #2
SpeedFactory Stainless Steel Exhaust Stud Kit - M10x1.25x54mm - 5pcs / Nut M10x1.25-5pcs / Washer M10-5pcs
Asin: B0CD36BGT7 | Model: 54mm | PartNumber: 54mm | Ean: 0634562800787 | UPC: 634562800787
These Stud Kits Incorporate A Hex Key Tip That Allows Them To Be Easily Installed Using An Allen Wrench. Stainless 12-Point Nuts And Washers Are Included..
Features
- Our high quality stainless stud kits look great and allow you to properly clamp your exhaust manifold to the cylinder head without experiencing sealing problems.
- These stud kits incorporate a hex key tip that allows them to be easily installed using an Allen wrench. Stainless 12-point nuts and washers are included.
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 6.00 x 6.00 x 6.00 Inches | Weight: 1.00 Pounds
See On Amazon #3
SpeedFactory B-Series LS/VTEC Conversion Dowel Pins (2pcs)
Asin: B0CDNQ45CY | Ean: 0634562801890 | UPC: 634562801890
Precision Machined & Hardened 4140 Chromoly Steel, Sold As A Pair (2 Pcs.), Compatible Cylinder Heads: B18c, B16, & B17, Compatible Engine Blocks: B18a/B, B20b, & B20z.
Features
- Our precision hardened chromoly LS / VTEC Conversion Dowel Pins won t deflect and will maintain precise cylinder head location under heavy power loads when installing a Honda B-Series VTEC cylinder head onto a NON-VTEC block.
- Precision Machined & Hardened 4140 Chromoly Steel, Sold As A Pair (2 pcs.), Compatible Cylinder Heads: B18C, B16, & B17, Compatible Engine Blocks: B18A/B, B20B, & B20Z
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 4.00 x 4.00 x 4.00 Inches | Weight: 1.00 Pounds
See On Amazon #4
YCP Vitara Pistons with Rings for D15 D16 SOHC Engines Civic (75.5)
Asin: B08R7VRXM9 | Model: YCP-75.5MMKIT | PartNumber: YCP-75.5MMKIT
- T-6 Heat Treated For Greater Strength..
- Dual Oil Holes Provide Superior Wristpin Lubrication.
- Teflon Coating Provides Increased Piston Life, Improves Cylinder Sealing For Less Blow By And Frees Up More Power From Reduced Friction..
- Highly Resistant To Heat..
- 19Mm Floating Wristpins Fit Aftermarket D16 Forged Connecting Rods..
Features
- - YCP pistons are made from a much stronger casting than OEM pistons (AC8A Grade)
- - 19mm floating wristpins fit aftermarket D16 forged connecting rods.
- - T-6 Heat treated for greater strength.
- - Highly resistant to heat.
- - Dual oil holes provide superior wristpin lubrication
- - Teflon coating provides increased piston life, improves cylinder sealing for less blow by and frees up more power from reduced friction.
- See more on Amazon...
Brand: SpeedFactory | Manufacturer: SpeedFactory
Dimensions: 8.00 x 8.00 x 8.00 Inches
See On Amazon #5
SpeedFactory Billet B-Series -10AN Mega Flow Fuel Rail
Asin: B0CDNSQZXT | Ean: 0634562802026 | UPC: 634562802026
Includes (1) High-Flow Oem Banjo To -10 Orb Adaptor Fitting And (1) -10 Orb Port Plug For Bolt-On Applications, Precision Cnc Machined From 6061-T6 Billet Aluminum, -10 Orb Inlet/Outlet Ports W/Massive 20.4Mm (0.806€) Fuel Bore Supports.
Features
- Our Mega Flow fuel rail features a GIGANTIC 0.806 fuel bore with -10 ORB inlet/outlets and Viton O-rings. Perfect for high volume ethanol & methanol fuels, Our fuel rail's OEM style fitment is compatible with most intake manifolds & OEM fuel pressure regulators
- Includes (1) High-Flow OEM Banjo to -10 ORB adaptor fitting and (1) -10 ORB Port Plug for bolt-on applications, Precision CNC machined from 6061-T6 billet aluminum, -10 ORB Inlet/Outlet ports w/massive 20.4mm (0.806 ) fuel bore supports
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 4.00 x 24.00 x 4.00 Inches | Weight: 2.00 Pounds
See On Amazon #6
SpeedFactory Standard Dual Backdoor Intercooler 3" Inlet 3" Outlet - 600-850HP
Asin: B07C35NM4V | Ean: 0689750107308 | UPC: 689750107308
Rated For 600Hp-850Hp.
Will Fit Most Honda/Acura Chassis With Modification.
Features
- Core size is 24"x12"x3"
- Will fit most Honda/Acura chassis with modification
- Rated for 600HP-850HP
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: Speedfactory Racing
Dimensions: 13.00 x 30.00 x 8.00 Inches | Weight: 30.00 pounds
See On Amazon #7
SpeedFactory Titanium Turbo to Manifold Stud Kit - 4pc Raw
Asin: B0CDP44FV1 | Model: M10 40mm | PartNumber: M10 40mm | Ean: 0634562801487 | UPC: 634562801487
These Speedfactory Titanium Stud Kits Are Made Of Ti 6Al-4V And Incorporate A Stubby 4Mm Hex Key Tip That Allows Them To Be Easily Installed Using An Allen Wrench. Titanium 14Mm 6-Point Flange Nuts And Washers Are Included..
Features
- The SpeedFactory Racing Manifold to Turbo Titanium Stud Kit fits all turbo manifolds that have M10x1.5mm thread pitch bolt holes. This is a set of four (4) M10 x 1.5mm x 40mm Ti 6Al-4V studs, 6pt nuts, and washers.
- These SpeedFactory titanium stud kits are made of Ti 6Al-4V and incorporate a stubby 4mm hex key tip that allows them to be easily installed using an Allen wrench. Titanium 14mm 6-point flange nuts and washers are included.
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 4.00 x 4.00 x 4.00 Inches | Weight: 1.00 Pounds
See On Amazon #8
SpeedFactory High Performance MLSS-HP Head Gasket for Honda/Acura B-Series VTEC Engines - 84.5mm Bore | .040" Thickness
Asin: B0CDP2MNXY | Model: 84.5mm | PartNumber: 84.5mm | Ean: 0634562801753 | UPC: 634562801753
Features: Mlss-Hp (Multiple Layer Stainless Steel + Silicone Bead) Head Gasket Optimized For High Performance Use, Oe Quality, Oe Certified Manufacturer (Iso 9001, Iso/Ts16949, Iso 14001 Certified)..
Features
- These MLS gaskets have been purpose-built to provide an excellent seal on ALL B-Series VTEC applications, from factory setups to high compression / nitrous / turbocharged / supercharged engines.
- FEATURES: MLSS-HP (Multiple Layer Stainless Steel + Silicone Bead) Head Gasket optimized for high performance use, OE quality, OE certified manufacturer (ISO 9001, ISO/TS16949, ISO 14001 certified).
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 3.00 x 19.00 x 12.00 Inches | Weight: 3.00 Pounds
See On Amazon #9
SpeedFactory Stainless Steel Stud Kit - M8x1.25x55-10pcs - Raw
Asin: B0CD38BJYF | Model: 55mm | PartNumber: 55mm | Ean: 0634562800640 | UPC: 634562800640
(10) M8 X 1.25Mm X (Selected Length)Mm Stainless Steel Studs, (10) 12-Point M8x1.25Mm Stainless Steel Nuts, (10) M8 Stainless Steel Washers.
Features
- Our high quality stainless stud kits look great and allow you to properly clamp your intake or exhaust manifold to the cylinder head without experiencing sealing problems.
- (10) M8 x 1.25mm x (Selected length)mm Stainless Steel Studs, (10) 12-point M8x1.25mm Stainless Steel Nuts, (10) M8 Stainless Steel washers
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 6.00 x 6.00 x 6.00 Inches | Weight: 1.00 Pounds
See On Amazon #10
SpeedFactory B/D/F/H 70mm Thermal Throttle Body Gasket
Asin: B0CCC6VKZX | Ean: 0634562800107 | UPC: 634562800107
High Conformability And Resilience Allowing The Gasket To Conform To Irregular, Rough, And Even Warped Mating Surfaces And Provide A Secure Seal, High Melting Temp(Over 500*F), Long Life, Doesnâ€T Dry Out, Get Brittle Or Crack, Unaffected By Petrochemicals.
Features
- The SpeedFactory Racing 70mm Thermal Throttle Body Gasket is designed to work with all common aftermarket cast 68-70mm throttle bodies. Want a bolt-on & go reusable thermal gasket solution that requires no tedious aligning ? This is it!
- High conformability and resilience allowing the gasket to conform to irregular, rough, and even warped mating surfaces and provide a secure seal, High melting temp(over 500*F), Long life, doesn t dry out, get brittle or crack, unaffected by petrochemicals
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 6.00 x 6.00 x 6.00 inches | Weight: 1.00 Pounds
See On Amazon #11
SpeedFactory High Performance MLSS-HP Head Gasket for Honda D16 VTEC Engines - 76mm Bore | .036" Thickness
Asin: B0CDNNKH1C | Model: 76mm | PartNumber: 76mm | Ean: 0634562801777 | UPC: 634562801777
Our 0.036€ Gasket Thickness Makes Up For Cylinder Head/Block Surfacing Vs Oem 3-Layer 0.028€ Thickness And Allows Us To Utilize A 4-Layer Design, Ideal For High Output Engines & High Levels Of Head Lift/Movement.
Features
- SpeedFactory Racing is proud to release our own high-performance Honda D-Series VTEC MLS head gasket with integrated fire-ring!
- Our 0.036 gasket thickness makes up for cylinder head/block surfacing vs OEM 3-layer 0.028 thickness and allows us to utilize a 4-layer design, ideal for high output engines & high levels of head lift/movement
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 3.00 x 19.00 x 12.00 inches | Weight: 3.00 pounds
See On Amazon #12
SpeedFactory Oil Sandwich Plate Assembly
Asin: B0CDNL8V7R | Ean: 0634562801883 | UPC: 634562801883
Precision Cnc Machined From 6061-T6 Billet Aluminum, Black Anodized Finish Adds Durability And Eliminates Corrosion, Sandwich Plate Has Three (3) Ports:X1 -6 Orb Port (Use For Ls / Vtec Feed Line) X2 1/8 Npt Ports (Use For Filtered Clean Oil Supply To Turbo).
Features
- Our design was fully engineered with 46% more oil flow through the sandwich plate body to the oil filter, and provides x2 1/8 NPT ports to allow you not only feed a turbo but also fit an oil pressure or temp sensor.
- Precision CNC machined from 6061-T6 billet aluminum, Black Anodized finish adds durability and eliminates corrosion, Sandwich plate has three (3) ports:x1 -6 ORB port (use for LS / VTEC feed line) x2 1/8 NPT ports (use for filtered clean oil supply to turbo)
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 4.00 x 4.00 x 4.00 Inches | Weight: 2.00 Pounds
See On Amazon #13
SpeedFactory Titanium Turbo to Manifold Stud Kit - 4pc Burnt
Asin: B0CDNY62XB | Model: M10 40mm | PartNumber: M10 40mm | Ean: 0634562801494 | UPC: 634562801494
These Speedfactory Titanium Stud Kits Are Made Of Ti 6Al-4V And Incorporate A Stubby 4Mm Hex Key Tip That Allows Them To Be Easily Installed Using An Allen Wrench. Titanium 14Mm 6-Point Flange Nuts And Washers Are Included..
Features
- The SpeedFactory Racing Manifold to Turbo Titanium Stud Kit fits all turbo manifolds that have M10x1.5mm thread pitch bolt holes. This is a set of four (4) M10 x 1.5mm x 40mm Ti 6Al-4V studs, 6pt nuts, and washers.
- These SpeedFactory titanium stud kits are made of Ti 6Al-4V and incorporate a stubby 4mm hex key tip that allows them to be easily installed using an Allen wrench. Titanium 14mm 6-point flange nuts and washers are included.
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 4.00 x 4.00 x 4.00 Inches | Weight: 1.00 Pounds
See On Amazon #14
SpeedFactory Billet Battery Tie Down - Billet
Asin: B0CDP63SBW | Ean: 0634562801531 | UPC: 634562801531
Features
- Set off your engine bay with the SpeedFactory Billet Battery Tie Down! Each billet battery tie down is CNC'd from high quality 6061 aluminum. They are compatible with OEM mounts and will work on full size or smaller aftermarket batteries.
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 6.00 x 6.00 x 6.00 inches | Weight: 2.00 Pounds
See On Amazon #15
SpeedFactory 5.5mm Viton Honda Exhaust Valve Stem Seal - Blue - Set of 8
Asin: B0CDP2KBVT | Ean: 0634562801968 | UPC: 634562801968
Provides Proper Valve Lubrication And Minimizes Valve Guide Wear While Keeping Oil Out Of The Combustion Chambers - Oem Fitss: B-Series Vtec, K-Series, D-Series, H/F-Series Vtec, And F20c/F22c Engines With 5.5Mm Valve Stems..
Features
- Our 5.5mm Viton valve stem seals are heat resistant to 400 F and are extremely resistant to even the most aggressive fuels, oils, and abrasion - providing superior sealing and maximum durability.
- Provides proper valve lubrication and minimizes valve guide wear while keeping oil out of the combustion chambers - OEM fitss: B-Series VTEC, K-Series, D-Series, H/F-Series VTEC, and F20C/F22C engines with 5.5mm valve stems.
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 4.00 x 4.00 x 4.00 Inches | Weight: 1.00 Pounds
See On Amazon #16
SpeedFactory Stainless Steel Muffler 3.5" Inlet with 4" Turndown Tip
Asin: B0CF7TMD34 | Model: 3.5" | PartNumber: 3.5" | Ean: 0634562802866 | UPC: 634562802866
Muffler Body Only: 13.75" Length X 6.0" Diameter, Muffler Body With Inlet: 16.0" Length, Tip: 4.0€ Diameter, 5Pc Pie Cut Turndown.
Features
- The SpeedFactory LT-5 (Lobster Tail, 5pc pie cut) Race Muffler is a straight through design round body muffler which minimizes exhaust restriction and maximizes power output with a 4" pie cut turndown style exhaust tip.
- Muffler Body Only: 13.75 Length x 6.0 Diameter, Muffler Body with Inlet: 16.0 Length, Tip: 4.0 Diameter, 5pc pie cut turndown
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 7.00 x 21.00 x 8.00 inches | Weight: 11.00 Pounds
See On Amazon #17
SpeedFactory OBD1 - OBD2A ECU Jumper Harness For 92-95 Honda/Acura M/T
Asin: B081HYH236 | Ean: 0634562799944 | UPC: 634562799944
Installation Is Simple And No Cutting Or Soldering Is Necessary (For Jdm Spec Ecus). Plug In One Side Of The Harness To Your Obd2a Ecu And The Other Side Into Your Factory Obd1 Chassis Harness.Note: For Usdm Spec Ecu Applications, Installation Will Require A Secondary 4-Wire Oxygen Sensor ..
Features
- The SpeedFactory Racing OBD1 to OBD2A Honda/Acura ECU Conversion Harness allows you to use any OBD2A Honda/Acura M/T ECU in a 92-95 Civic, 92-95 Acura Integra, 92-95 Honda Accord (4 Cylinder), 92-95 Honda Prelude, and 92-95 Honda DelSol.
- Installation is simple and no cutting or soldering is necessary (for JDM SPEC ECUs). Plug in one side of the harness to your OBD2A ECU and the other side into your factory OBD1 chassis harness.Note: For USDM Spec ECU applications, installation will require a secondary 4-wire oxygen sensor .
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 6.00 x 6.00 x 6.00 Inches | Weight: 1.00 Pounds
See On Amazon #18
SpeedFactory Divided Grip Billet Engine Oil Cap
Asin: B0CD36TMYS | Ean: 0634562800305 | UPC: 634562800305
The Divided Grip Design Is Low-Profile And Easy To Grip With The Added Feature Of A Dividing Slot That Will Accommodate Almost Any Screwdriver Shaft Or Wrench Handle To Assist In Tightening Or Removal Of The Cap..
Features
- Upgrade your engine bay with a new SpeedFactory Billet Oil Cap, featuring a cohesive design that matches the rest of our product line!
- The Divided Grip design is low-profile and easy to grip with the added feature of a dividing slot that will accommodate almost any screwdriver shaft or wrench handle to assist in tightening or removal of the cap.
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 4.00 x 4.00 x 4.00 Inches | Weight: 1.00 Pounds
See On Amazon #19
SpeedFactory MAP Sensor 4 BAR B,D,F,H Series - Red
Asin: B0CC6VJXHM | Ean: 0634562799869 | UPC: 634562799869
40 To 260 Degrees Fahrenheit Temperature Operating Range, Able To Respond From 10% Of The Pressure Scale To 90% Of The Pressure Scale In .001 Seconds (The Fastest Response Time Of Any Map Sensor On The Market) Dimensionally Identical To Stock Map Sensor..
Features
- SpeedFactory 4 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.
- 40 to 260 degrees Fahrenheit temperature operating range, able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market) Dimensionally identical to stock MAP sensor.
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 4.00 x 4.00 x 4.00 Inches | Weight: 1.00 pounds
See On Amazon #20
Speedfactory OBD2A - OBD1 ECU Jumper Harness For 96-98 Honda/Acura
Asin: B081J2G45B | Ean: 0634562799951 | UPC: 634562799951
Installation Is Simple And No Cutting Or Soldering Is Necessary. Plug In One Side To Your Obd-1 Ecu And The Other Side Into Your Factory Engine Harness..
Features
- The use of an OBD-1 (92-95) ECU is needed for proper tuning of your high performance engine. The SpeedFactory Racing OBD2-A to OBD-1 Honda/Acura ECU Conversion harness allows you to use an OBD-1 Honda/Acura M/T ECU in a 96-98 (OBD-2A) Civic, Integra, Prelude, CR-V or Accord.
- Installation is simple and no cutting or soldering is necessary. Plug in one side to your OBD-1 ECU and the other side into your factory engine harness.
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 6.00 x 6.00 x 6.00 Inches | Weight: 1.00 Pounds
See On Amazon #21
SpeedFactory Catch Can NA Version with Filter Fittings Line Compatible with Honda B-Series
Asin: B07C353H5P | Ean: 0689750106837 | UPC: 689750106837
The Factory Pcv System Is Replaced And All Oil Vapors Are Vented To The Atmosphere Through The Single Filter..
The Speedfactory Catch Can Is Designed To Work With Any B-Series Naturally Aspirated Engine Setup..
Features
- Catch Can Dimensions: 3" Diameter x 7" Tall
- The SpeedFactory Catch Can is designed to work with any B-Series naturally aspirated engine setup.
- The factory PCV system is replaced and all oil vapors are vented to the atmosphere through the single filter.
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: Speedfactory Racing
Dimensions: 8.00 x 11.00 x 6.00 Inches | Weight: 5.00 pounds
See On Amazon #22
Speedfactory Racing Billet Shift Knob V1
Asin: B0CDNTZZS3 | Ean: 0634562802019 | UPC: 634562802019
Medium Weight 6.9 Oz, Precision Cnc Machined 6061-T6 Billet Aluminum, Black, Hard-Anodized Finish Adds Durability And Eliminates Corrosion, M10 X 1.5Mm Thread Pitch Fits Most Honda Applications, Height-Setting Stainless Steel Bolt Offers Over ½Â€ Of Adjustment.
Features
- Upgrade your driving feel with a new SpeedFactory Billet Shift Knob V1, featuring an ergonomic design that matches your grip.
- Medium weight 6.9 Oz, Precision CNC machined 6061-T6 billet aluminum, Black, hard-anodized finish adds durability and eliminates corrosion, M10 x 1.5mm thread pitch fits most Honda applications, Height-setting stainless steel bolt offers over of adjustment
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 6.00 x 6.00 x 6.00 Inches | Weight: 2.00 Pounds
See On Amazon #23
SpeedFactory K Series Titanium Valve Cover Hardware Kit Heat Resistance - Raw
Asin: B081J39Q8K
Part Number: Sf-02-078.
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 3.50 x 7.00 x 4.50 Inches | Weight: 1.00 pounds
See On Amazon #24
SpeedFactory MAP Sensor 4 BAR Compatible with Honda Acura K Series - Red
Asin: B07C373K1N | Ean: 0689750106721 | UPC: 689750106721
Automatic Temperature Compensation.�.
Able To Respond From 10% Of The Pressure Scale To 90% Of The Pressure Scale In .001 Seconds (The Fastest Response Time Of Any Map Sensor On The Market).�.
Features
- 40 to 260 degrees Fahrenheit temperature operating range
- Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).
- Automatic temperature compensation.
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: Speedfactory Racing
Dimensions: 3.50 x 7.00 x 4.50 inches | Weight: 1.00 pounds
See On Amazon #25
Speedfactory Racing B-Series / H23 Adjustable Cam Gear (Single Gear w/Magnets)
Asin: B0CWVWCM79 | Ean: 0634562805928 | UPC: 634562805928
Provides Proper Valve Lubrication And Minimizes Valve Guide Wear While Keeping Oil Out Of The Combustion Chambers - Oem Fitss: B-Series Vtec, K-Series, D-Series, H/F-Series Vtec, And F20c/F22c Engines With 5.5Mm Valve Stems..
Features
- Our 5.5mm Viton valve stem seals are heat resistant to 400 F and are extremely resistant to even the most aggressive fuels, oils, and abrasion - providing superior sealing and maximum durability.
- Provides proper valve lubrication and minimizes valve guide wear while keeping oil out of the combustion chambers - OEM fitss: B-Series VTEC, K-Series, D-Series, H/F-Series VTEC, and F20C/F22C engines with 5.5mm valve stems.
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 2.00 x 8.00 x 4.00 Inches | Weight: 2.00 Pounds
See On Amazon #26
Speedfactory 3 Port Boost Control Solenoid Kit
Asin: B0CCX5F4B8 | Ean: 0634562800015 | UPC: 634562800015
0-125 Psi Pressure Range,(2) 1/8" X 1/4" Barbed Male Fittings And (1) Sintered Muffler, -24" Wires Leads For Easy Install Non-Polarized Wiring, -Compatible With Haltech, Motec, Hondata, Neptune, Aem, Megasquirt, Holley, Ktuner, And Many More!.
Features
- The SpeedFactory Racing 3-Port Boost Control Solenoid Kit allows precise boost control with a PWM (pulsewidth modulation) signal from a source (Engine Control Module or Electronic Boost Controller).This solenoid can raise the boost level as high as 2-3 times the spring pressure of the wastegate.
- 0-125 PSI pressure range,(2) 1/8 x 1/4 barbed male fittings and (1) sintered muffler, -24 wires leads for easy install Non-polarized wiring, -Compatible with Haltech, Motec, Hondata, Neptune, AEM, Megasquirt, Holley, KTuner, and many more!
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 6.00 x 6.00 x 6.00 Inches | Weight: 1.00 pounds
See On Amazon #27
SpeedFactory B18A/B, B20 Thermal Intake Manifold Gasket
Asin: B0CCC6PZVQ | Model: Honda/Acura B18A/B, Honda B20 | PartNumber: Honda/Acura B18A/B, Honda B20 | Ean: 0634562800176 | UPC: 634562800176
High Conformability And Resilience Allowing The Gasket To Conform To Irregular, Rough, And Even Warped Mating Surfaces And Still Provide A Secure Seal,Extreme Chemical Resistance, Unaffected By Petrochemicals,High Melting Temperature (Over 500*F).
Features
- SpeedFactory Racing Thermal Intake Manifold Gaskets are designed to be used as a OEM replacements for everything from street to full drag racing applications.Our gaskets are reusable and reduce the transfer of heat from the head to the intake manifold
- High conformability and resilience allowing the gasket to conform to irregular, rough, and even warped mating surfaces and still provide a secure seal,Extreme chemical resistance, unaffected by petrochemicals,High melting temperature (over 500*F)
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 4.00 x 24.00 x 4.00 Inches | Weight: 1.00 Pounds
See On Amazon