Taytools - Buying Guide
Last Updated: 04/28/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
24 Inch Anodized Aluminum Straight Edge Guaranteed Straight to Within .001 Inches Over Full 24 Inches Length SE24
Asin: B017CFWP58 | Model: 108508 | PartNumber: 108508 | Ean: 0700667464886 | UPC: 700667464886
Reference Edge Is Machined Flat And Smooth.
Hanging Hole On One End.
Contoured Cross Section For Easy Gripping.
Anodized Aluminum .0400” (7/16”) Thick By 1.750” (1 ¾”) Wide.
Features
- Guaranteed straight to within 0.001 (that's one thousandth of an inch!) over the entire 24 length
- Anodized aluminum .0400 (7/16 ) thick by 1.750 (1 ) wide
- Reference edge is machined flat and smooth
- Contoured cross section for easy gripping
- Hanging hole on one end
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
See On Amazon #2
Taytools TTW05928 1/4-20 Centered Hole Sliding T-Nuts for T Track Extrusions 25 Pack
Asin: B08WFG7WYP | Model: TTW05928 | PartNumber: TTW05928
Specifications: Material: Unfinished Carbon Steel; Threads: 1/4-20; Length; 1.00 Inch; Width: .443 Inch; Thickness On Sides And Ends; .094 Inch; Thickness In Middle At Threads: .130 Inch..
These Slide-In T-Nuts With A Centered Thread Hole Are A Cost-Effective Fastening Option For T-Track And Other Aluminum Extrusions..
Features
- 25 pack
- These slide-in T-nuts with a centered thread hole are a cost-effective fastening option for T-Track and other aluminum extrusions.
- Specifications: Material: Unfinished carbon steel; Threads: 1/4-20; Length; 1.00 inch; Width: .443 inch; Thickness on sides and ends; .094 inch; Thickness in middle at threads: .130 inch.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 0.09 x 1.00 x 0.45 Inches | Weight: 0.26 Pounds
See On Amazon #3
3M (TM) 7 Sheet 4-1/4 inch x 11 inch PSA Lapping Microfinishing Film For Scary Sharp Sharpening System Aluminum Oxide AO
Asin: B07TDMS1H8 | Model: 279175 | PartNumber: 279175 | Ean: 0737787279175 | UPC: 737787279175
100% Made In The Usa.
Aluminum Oxide (Ao) Abrasive Material.
Sizes: 4-1/4" X 11".
Pressure Sensitive Adhesive (Psa) With 3 Mil High-Strength Polyester Film Backing.
Features
- 7 sheet bundle containing the following micron sizes (.3, 1, 3, 9, 12, 30 and 40)
- Pressure Sensitive Adhesive (PSA) with 3 mil high-strength polyester film backing
- 100% made in the USA
- Sizes: 4-1/4 x 11
- Aluminum Oxide (AO) abrasive material
- See more on Amazon...
Brand: Taytools | Manufacturer: 3M (TM)
Dimensions: 0.01 x 157.48 x 39.37 Inches
See On Amazon #4
Taytools 770795 Lot 10 Each 1/4 20 Female Thread Star Knobs 2 inch Diameter with Through Insert
Asin: B01DVGNLUU | Ean: 0791617731042 | UPC: 791617731042
2” Diameter.
.800" Diameter Shoulder.
1” Height.
1/4 20 Threaded Through Insert.
Features
- 10 each star knobs
- 1/4 20 threaded through insert
- 2 diameter
- 1 height
- .800 diameter shoulder
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 1.00 x 2.00 x 2.00 Inches | Weight: 0.11 pounds
See On Amazon #5
Taytools Cork Rubber Vise Jaw Lining 5-7/8 inch wide x 36 inch long x 1/8 inch thick (With Pressure Sensitive Adhessive)
Asin: B092RN8Z54
It Can Also Create A Nice Cushion To Prevent Work From Getting Marred Or Dented..
Sheets Are 5-7/8 Inch Wide X 36 Inch Long X 1/8 Inch Thick. It Comes With Or Without Pressure Sensitive Adhesive (Psa)..
Other Uses Include Lining Clamp Faces, Bench Dogs And Holdfasts. It Can Be Placed Under Furniture And Workbench Legs To Prevent Sliding. It Can Be Placed Under Jigs To Help Keep Them In Place..
When Installed On The Jaws Of A Woodworking Vise, It Will Help The Jaws Firmly Hold Work Pieces And Keep Them Securely In Place..
Features
- This cork rubber sheeting is a composite material made from natural cork and neoprene rubber. Due to the high neoprene content, this sheeting is incredible grippy, especially under pressure.
- When installed on the jaws of a woodworking vise, it will help the jaws firmly hold work pieces and keep them securely in place.
- It can also create a nice cushion to prevent work from getting marred or dented.
- Other uses include lining clamp faces, bench dogs and holdfasts. It can be placed under furniture and workbench legs to prevent sliding. It can be placed under jigs to help keep them in place.
- Sheets are 5-7/8 inch wide x 36 inch long x 1/8 inch thick. It comes with or without Pressure Sensitive Adhesive (PSA).
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
See On Amazon #6
Taytools 12" Rigid Machinist Rule Ruler Hardened Spring Steel 4R Graduations in 1/8", 1/16", 1/32" and 1/64" MRSAE-12
Asin: B071FZ1NT7 | Model: MRSAE-12 | PartNumber: MRSAE-12 | Ean: 0791617734845 | UPC: 791617734845
Rule Is Precision Photo Etched And Black Filled For Long Life And Easy Readability.
Brushed Finish.
Graduated With Quick Reading 1/8" And 1/16" Increments On One Side And 1/32" And 1/64" On The Other.
Rigid Blade Is 12" Long, .040” Thick And 1” Wide.
Features
- Made from hardened spring steel.
- Rigid blade is 12 long, .040 thick and 1 wide
- Rule is precision photo etched and black filled for long life and easy readability
- Graduated with quick reading 1/8 and 1/16 increments on one side and 1/32 and 1/64 on the other
- Brushed finish
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks LLC
See On Amazon #7
Taytools 101202 10 Piece Soft Silicone Chisel Edge Guard Set for Chisels 1/8 Inch to 1-1/4 Inches
Asin: B07BW5SLZN | Ean: 0700667470184 | UPC: 700667470184
Will Not Slide Off Chisels Like Hard Plastic Edge Guards.
Fits Chisels From 1/8" To 1-1/4".
10 Pieces Set Contains Two Each Of 1/8"-1/4", 3/8"-1/2", 5/8"-3/4", 7/8-1", 1-1/8"-1-1/4”.
Made From Soft, Flexible Silicone Rubber.
Features
- Protect the sharp edges of your chisels from damage with these silicone edge guards
- Made from soft, flexible silicone rubber
- Will not slide off chisels like hard plastic edge guards
- 10 pieces set contains two each of 1/8-1/4, 3/8-1/2, 5/8-3/4, 7/8-1, 1-1/8-1-1/4
- Fits chisels from 1/8 to 1-1/4
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
See On Amazon #8
7 Sheet Variety Pack PSA Pressure Sensitive Adhesive (.3, 1, 3, 9, 12, 30 and 40 microns) Lapping Microfinishing Film Aluminum Oxide (AO) 8-1/2 x 11 Inches
Asin: B07QTC8LBH | Model: 465449 | PartNumber: 465449 | Ean: 0700667465449 | UPC: 700667465449
100% Made In The Usa.
Aluminum Oxide (Ao) Abrasive Material.
3 Mil High-Strength Polyester Film Backing.
Pressure Sensitive Adhesive (Psa).
Features
- 7 sheet bundle containing the following micron sizes (.3, 1, 3, 5, 12, 30 and 40)
- Pressure Sensitive Adhesive (PSA)
- 100% made in the USA
- 3 mil high-strength polyester film backing
- Aluminum Oxide (AO) abrasive material
- See more on Amazon...
Brand: Taytools | Manufacturer: Taytools
Dimensions: 0.10 x 11.00 x 8.50 Inches
See On Amazon #9
Taytools 774021 Lot 10 each 3/8 16 Male Threads Star Knobs 2 inch Diameter with 2 inch Long Threaded Post
Asin: B01H12D5PG | Ean: 0791617730311 | UPC: 791617730311
2” Diameter.
.800" Diameter Shoulder.
3" Overall Height (Including Post).
3/8 16 Threaded Post 2" Long.
Features
- 10 each star knobs
- 3/8 16 threaded post 2 long
- 2 diameter
- 3 overall height (including post)
- .800 diameter shoulder
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Weight: 1.04 pounds
See On Amazon #10
Bob Smith Industries BSI/Taytools Combo Pack with 1 OZ Thin Viscosity Insta-Cure TM Cyanoacrylate CA Super Glue and 2 OZ Accelerator Insta-Set TM
Asin: B07VYSYFGH | Ean: 0737787285145 | UPC: 737787285145
Insta-Set (Tm) Is A Catalyst Which Acts As An Accelerator That Allows Cas To Fully Cure In 6-8 Seconds. Insta-Set (Tm) Is Formulated With A Strawberry Scent And Activates Ca Without Any Degrading Of The Cas Strength. Un-Cure (Tm) Debonder Will Soften Cured Ca To Clean Up Squeeze Out, Spills Or For Disassembly..
100% Made In The Usa!!.
Ca Glue Comes With Fine Tip Applicator.
Insta-Cure+ Is A Bsi’S Medium Or Higher Viscosity Ca Glue Used For Loose Fitting Joints Or Filling Small Gaps..
Features
- Set includes 1 ounce bottle of medium viscosity (Insta-Cure + TM) Cyanoacrylate CA Super Glue 2 ounce bottle of Accelerator (Insta-Set TM).
- Insta-Cure+ is a BSI s medium or higher viscosity CA glue used for loose fitting joints or filling small gaps.
- INSTA-SET (TM) is a catalyst which acts as an accelerator that allows CAs to fully cure in 6-8 seconds. INSTA-SET (TM) is formulated with a strawberry scent and activates CA without any degrading of the CAs strength. UN-CURE (TM) debonder will soften cured CA to clean up squeeze out, spills or for disassembly.
- CA glue comes with fine tip applicator
- 100% made in the USA!!
- See more on Amazon...
Brand: BSI / Taytools | Manufacturer: Bob Smith Industries BSI
Weight: 0.20 pounds
See On Amazon #11
Taytools 770801 Lot 10 Each 5/16 18 Female Thread Star Knobs 2 inch Diameter with Through Insert
Asin: B01DVGTE8I | Ean: 0791617731059 | UPC: 791617731059
2” Diameter.
.800" Diameter Shoulder.
1” Height.
5/16 18 Threaded Through Insert.
Features
- 10 each star knobs
- 5/16 18 threaded through insert
- 2 diameter
- 1 height
- .800 diameter shoulder
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 1.00 x 2.00 x 2.00 Inches | Weight: 0.50 pounds
See On Amazon #12
50" Anodized Aluminum Straight Edge Guaranteed Straight to Within .003" Over Full 50" Length SE50
Asin: B017CGDO4S | Model: 108514 | PartNumber: 108514 | Ean: 0700667464909 | UPC: 700667464909
The Easy-Grip Cross Section Is 7/16 Inch Thick And 1-3/4 Inch Wide. Finish Is Black Anodized..
These Straight Edges Are Available In Five Different Lengths..
There Is A Hanging Hole In One End..
. The Straight Edge Is Made From Extruded Aircraft Aluminum And Then The Reference Edge Is Machined Flat To Within 0.003" Over The Entire 50 Inch Length..
Features
- This aluminum straight edge is an economical alternative to other much more expensive straight edges on the market. This straight edge is very helpful to determine machine table flatness and in setting up machines such as jointers and planers and various out feed tables.
- . The straight edge is made from extruded aircraft aluminum and then the reference edge is machined flat to within 0.003 over the entire 50 inch length.
- The easy-grip cross section is 7/16 inch thick and 1-3/4 inch wide. Finish is black anodized.
- There is a hanging hole in one end.
- These straight edges are available in five different lengths.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 1.75 x 50.00 x 0.41 Inches | Weight: 2.60 Pounds
See On Amazon #13
Taytools 773673 Cabinet Scraper Burnisher Unhandled High Carbon Steel HRC 62-64 3/8 Diameter x 5 Inches Long
Asin: B082T4PWD9 | Model: 773673 | PartNumber: 773673 | Ean: 0796029773673 | UPC: 796029773673
This High Carbon Steel Burnisher Has A Hardness Of Hrc 62-64..
Each Rod Comes With A Vinyl Tip. A Wood Handle Can Easily Be Added Later..
This Unhandled Burnishing Rod Is Very Cost Effective As No Handle Is Included. Size Is 3/8 Diameter By 5 Inches Long..
Creating A Proper Cabinet Scraper Edge (Referred To As A Hook Or Burr) Is An Important Skill To Learn And Requires A Dedicated Burnisher. Burnishers Are Tools With Hard, Polished Rods That Form Or “Draw Out” The Steel From The Edge That Is Used To Form The Thin Hook Or Cutting Edge..
Features
- A cabinet scraper is a simple, old-world tool that has many uses in the modern woodshop. A well-tuned cabinet scraper can remove glue, tame tearout, refining a finish, or put a glass-smooth finish on wood.
- Creating a proper cabinet scraper edge (referred to as a hook or burr) is an important skill to learn and requires a dedicated burnisher. Burnishers are tools with hard, polished rods that form or draw out the steel from the edge that is used to form the thin hook or cutting edge.
- This high carbon steel burnisher has a hardness of HRC 62-64.
- This unhandled burnishing rod is very cost effective as no handle is included. Size is 3/8 diameter by 5 inches long.
- Each rod comes with a vinyl tip. A wood handle can easily be added later.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
See On Amazon #14
Taytools Pair Hardened Steel 123 Blocks and Attachment Hardware Kit
Asin: B0C4W1XZWB
Blocks Have 23 Each .340" Through Holes (5 Holes Tapped With 3/8" X 16 Tpi Threads And 18 Holes Are Untapped). Note: These Blocks Cannot Be Bolted Together Without Exposed Hardware. In Order To Attach Multiple Blocks Together With No Exposed Hardware You Will Require The Taytools 123 Block Hardware Attachment Kit. Approximate Weight Per Block: 430 Grams/.95 Pounds..
This Hardware Kit Contains The Following Parts: Two Each 7/8” Long By 5/16” Diameter 8-32 Threaded Dowels, Two Each 7/8” Long By 5/16” Diameter Through Hole Dowels That Fit 8-32 Bolts, Two Each Of The Following Length 8-32 Allen Head Cap Screws 1-1/2”, 2” And 2-1/2”, 9/64” Hex Key And A Small Flat Screwdriver Tip..
Using This Hardware Allows Two Blocks To Be Attached To Each Other In Literally Every Possible Configuration. Comes In Telescoping Plastic Storage Tube. Patent Pending..
123 Block Hardware Attachnent Kit Allows Joining Blocks Together With All Hardware Buried Within The Blocks. The Hardware Is Also Slightly Smaller Than The Holes Allowing Edges And Faces To Be Joined Together With Faces Being Flush With Each Other..
1-2-3 23 Hole Blocks Are Made Of Hardened Tool Steel (Rc 56-60) And Precision Ground On All Six Sides. Overall Size Within +/- 0.0001" (One Ten Thousandth Of An Inch) Flatness And Parallelism Within +/- 0.0001" (One Ten Thousandth Of An Inch) Squareness On All Sides To Within +/- 0.0003" Per Inch (Three Ten Thousandths Of An Inch) Pairs Are Matched To A Tolerance Of 0.0002" (Two Ten Thousandths Of An Inch). Two (2) Pieces Per Set ..
Features
- 123 blocks coupled with our attachment hardware kit have an almost endless array of uses in the shop. They can be used for machine set up, layout and inspection.
- 1-2-3 23 Hole Blocks are made of hardened tool steel (RC 56-60) and precision ground on all six sides. Overall size within +/- 0.0001 (one ten thousandth of an inch) Flatness and parallelism within +/- 0.0001 (one ten thousandth of an inch) Squareness on all sides to within +/- 0.0003 per inch (three ten thousandths of an inch) Pairs are matched to a tolerance of 0.0002 (two ten thousandths of an inch). Two (2) pieces per set .
- Blocks have 23 each .340 through holes (5 holes tapped with 3/8 x 16 TPI threads and 18 holes are untapped). Note: these blocks cannot be bolted together without exposed hardware. In order to attach multiple blocks together with no exposed hardware you will require the Taytools 123 Block Hardware Attachment Kit. Approximate weight per block: 430 grams/.95 pounds.
- 123 Block Hardware Attachnent Kit allows joining blocks together with all hardware buried within the blocks. The hardware is also slightly smaller than the holes allowing edges and faces to be joined together with faces being flush with each other.
- This hardware kit contains the following parts: two each 7/8 long by 5/16 diameter 8-32 threaded dowels, two each 7/8 long by 5/16 diameter through hole dowels that fit 8-32 bolts, two each of the following length 8-32 Allen Head Cap Screws 1-1/2 , 2 and 2-1/2 , 9/64 hex key and a small flat screwdriver tip.
- Using this hardware allows two blocks to be attached to each other in literally every possible configuration. Comes in telescoping plastic storage tube. Patent pending.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 6.00 x 2.00 x 4.00 Inches
See On Amazon #15
Taytools 774014 Lot 10 Each 5/16 18 Male Thread Star Knobs 2 inch Diameter with 2 inch Long Threaded Post
Asin: B01H128VI2 | Ean: 0791617730304 | UPC: 791617730304
2” Diameter.
.800" Diameter Shoulder.
3" Overall Height (Including Post).
5/16 18 Threaded Post 2" Long.
Features
- 10 each star knobs
- 5/16 18 threaded post 2 long
- 2 diameter
- 3 overall height (including post)
- .800 diameter shoulder
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Weight: 0.77 pounds
See On Amazon #16
Taytools 469744 1-2-3 Blocks No Holes Matched Pair (2 Each), Hardened Steel RC 55-62, (1"x2"x3") 123 Precision Ground Machinist Set Up Blocks
Asin: B081D9CYPJ | Model: 469744 | PartNumber: 469744 | Ean: 0700667469744 | UPC: 700667469744
They Contain No Holes..
There Are 2 Pieces Per Set..
Overall Sizes Are Within +/- 0.0002 Inch Flatness And Parallelism Are Within 0.0002Inch. Squareness On All Sides To Within 0.0002 Inch. Pairs Are Matched To A Tolerance Of 0.0002 Inch..
They Are Precision Ground And Case Hardened To Rc 55-62 On All Six Sides..
Features
- This is a matched set (2 each) of professional quality 1-2-3 blocks
- They are precision ground and case hardened to RC 55-62 on all six sides.
- They contain no holes.
- Overall sizes are within +/- 0.0002 inch Flatness and parallelism are within 0.0002inch. Squareness on all sides to within 0.0002 inch. Pairs are matched to a tolerance of 0.0002 inch.
- There are 2 pieces per set.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
See On Amazon #17
Replacement Screw Assembly Compatable with Products Engineering Corporation (PEC), Mitutoyo, Brown & Sharp Combination Machinist Square Heads, Center Finders and Protractor Heads 12-CSA
Asin: B01GM7LDHI | Model: 12-CSA | PartNumber: 12-CSA | Ean: 0791617732148 | UPC: 791617732148
Features
- Replacement screw assembly compatible with Products Engineering Corporation (PEC) 12", 18" and 24" combination square heads, center finders and protractor heads
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
See On Amazon #18
Taytools 774007 Lot 10 each 1/4 20 Male Thread Star Knobs 2 inch Diameter with 2 inch Long Threaded Post
Asin: B01DVH0K30 | Ean: 0791617731073 | UPC: 791617731073
2” Diameter.
.800" Diameter Shoulder.
3" Overall Height (Including Post).
1/4 20 Threaded Post 2" Long.
Features
- 10 each star knobs
- 1/4 20 threaded post 2 long
- 2 diameter
- 3 overall height (including post)
- .800 diameter shoulder
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Weight: 0.60 pounds
See On Amazon #19
Taytools 388091 Quick-Adjust Vertical Workbench Surface Hold Down Clamp, Holdfast, Fits 3/4 Dog Holes
Asin: B09MDR6S1Q | Model: 388091 | PartNumber: 388091 | Ean: 0850026388091 | UPC: 850026388091
Efficient Clamping Mechanism: The Moveable Clamp Jaw Slides Effortlessly Along The Serrated Rail And Locks Down Securely When The Handle Is Tightened, Providing Slip-Resistant Clamping. The Hourglass Profile Of The Serrated Carbon Steel Rail Resists Flexing And Twisting, Ensuring Stability During Use..
User-Friendly Design: The Ergonomic Soft Grip Plastic/Tpr Handle Optimizes Torque And Reduces Hand Fatigue During Extended Use, Enhancing User Comfort And Control. With Black-Coated Threads To Resist Corrosion, This Clamp Is Built To Withstand The Rigors Of Heavy-Duty Work Environments While Providing Efficient And Reliable Clamping Solutions..
Versatile Jaw Design: The Moveable Jaw Features Smooth-Turning Carbon Steel Acme Threads And A 1” Diameter Swivel Pad With A Non-Marring Surface, Allowing For Secure Gripping Of Odd-Shaped Parts. With A Jaw Depth Of 2-7/8”, It Provides Powerful And Rigid Clamping For A Variety Of Workpieces..
Durable Construction: Crafted With An Unbreakable Cast Zinc Base And Reinforced Malleable Steel Movable Jaw, Ensuring Longevity And Reliability In Various Work Conditions. Both Base And Post Are Black Coated To Resist Corrosion, Enhancing Durability..
Features
- Quick-Adjust Vertical Dog Hold Clamps: Easily secure work tightly to a work bench using 3/4 dog holes. The 1-1/2 long post with machined serrations ensures a tight grip without slipping, accommodating workpieces up to 7" thick.
- Durable Construction: Crafted with an unbreakable cast zinc base and reinforced malleable steel movable jaw, ensuring longevity and reliability in various work conditions. Both base and post are black coated to resist corrosion, enhancing durability.
- Efficient Clamping Mechanism: The moveable clamp jaw slides effortlessly along the serrated rail and locks down securely when the handle is tightened, providing slip-resistant clamping. The hourglass profile of the serrated carbon steel rail resists flexing and twisting, ensuring stability during use.
- Versatile Jaw Design: The moveable jaw features smooth-turning carbon steel Acme threads and a 1 diameter swivel pad with a non-marring surface, allowing for secure gripping of odd-shaped parts. With a jaw depth of 2-7/8 , it provides powerful and rigid clamping for a variety of workpieces.
- User-Friendly Design: The ergonomic soft grip Plastic/TPR handle optimizes torque and reduces hand fatigue during extended use, enhancing user comfort and control. With black-coated threads to resist corrosion, this clamp is built to withstand the rigors of heavy-duty work environments while providing efficient and reliable clamping solutions.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 13.00 x 10.75 x 5.00 Inches
See On Amazon #20
Taytools 468310 Large Adjustable Trammel Head Set Beam Compass, Pencil Holders, Hardened Points
Asin: B07GWDS4Q8 | Model: 468310 | PartNumber: 468310 | Ean: 0700667468310 | UPC: 700667468310
Set Comes With Two Trammel Heads. Both Points Can Be Removed And Will Accept Standard Wooden Pencils.
The Points Are Ground Sharp And Hardened To Allow Scribing On Steel, Sheet Metal Or Aluminum.
Heads Are Made From Tough Cast Zinc.
Heads Will Clamp Onto Any Wood Beam From 1/2 Inch To 1-5/8 Inch Wide.
Features
- These adjustable clamp on trammel heads are the perfect tool to measure, mark or scribe circles or arcs outside the range of those that could be produced with a standard compass. Unlimited arcs can be made using your custom-length shop-made beam.
- Heads will clamp onto any wood beam from 1/2 inch to 1-5/8 inch wide
- Set comes with two trammel heads. Both points can be removed and will accept standard wooden pencils
- Heads are made from tough cast zinc
- The points are ground sharp and hardened to allow scribing on steel, sheet metal or aluminum
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 2.00 x 7.00 x 2.00 Inches | Weight: 0.90 Pounds
See On Amazon #21
Taytools 468334 Small Router Plane 1/4 Inch Wide Blade, 4-1/8 x 1-1/4 Inch Base, Ductile Cast Iron Body, Blade Hardness 55-60 HRC
Asin: B07GW7X35P | Model: 468334 | PartNumber: 468334 | Ean: 0700667468334 | UPC: 700667468334
Blade Is Hardened And Tempered To 55-60 Hrc.
Overall Length 4-18", Width 2-1/4", Weight 8 Ounces.
Sole Precision Ground To Within 0.001” Over The Entire Length.
1/4 Inch Wide Square Blade Is Ground To 25 Degrees.
Features
- Body made from stress-relieved ductile cast iron with precision ground sole
- 1/4 inch wide square blade is ground to 25 degrees
- Blade is hardened and tempered to 55-60 HRC
- Sole precision ground to within 0.001 over the entire length
- Overall length 4-18, width 2-1/4, weight 8 ounces
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
See On Amazon #22
Taytools 468303 Compact Adjustable Trammel Head Set Beam Compass, Pencil Holders, Hardened Points
Asin: B07GW9Y4MR | Model: 468303 | PartNumber: 468303 | Ean: 0700667468303 | UPC: 700667468303
Set Comes With Two Trammel Heads, One Has An Integrated Pencil Holder That Will Accept Standard Wooden Pencils. Comes With Extra Set Of Points..
The Points Are Ground Sharp And Hardened To Allow Scribing On Steel, Sheet Metal Or Aluminum.
Heads Are Made From Tough Cast Iron.
Heads Will Clamp Onto Any Wood Beam From 3/8 Inch To 1-1/4 Inch Wide.
Features
- These adjustable clamp on trammel heads are the perfect tool to measure, mark or scribe circles or arcs outside the range of those that could be produced with a standard compass. Unlimited arcs can be made using your custom-length shop-made beam.
- Heads will clamp onto any wood beam from 3/8 inch to 1-1/4 inch wide
- Set comes with two trammel heads, one has an integrated pencil holder that will accept standard wooden pencils. Comes with extra set of points.
- Heads are made from tough cast iron
- The points are ground sharp and hardened to allow scribing on steel, sheet metal or aluminum
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
See On Amazon #23
10 Pack 1/4-20 x 3/4 Inch Threads 303 Stainless Steel Diamond Knurled Thumb Screws Knobs with Straight Shoulders Right-Hand Threads SAE Flat Tip Uncoated
Asin: B07XF6H33H | Ean: 0700667467412 | UPC: 700667467412
Available In The Following Sae Thread Sizes: 6-32, 8-32, 10-32, 1/4-20, 5/16-18 And 3/8-16.
Specifications: 1/4-20 Threads, Head Diameter: .750 Inches, Head Height: .3125 Inches, Shoulder Diameter: .500 Inches, Shoulder Height: .1875 Inches, Thread Length: .750 Inches..
Made From 303 Stainless Steel (Ss) Which Is A Strong, Corrosion-Resistant Alloy With Excellent Resistance To Heat. 303 Ss Is Designed To Be Used In High-Stress, Outdoor And Corrosive Applications..
The Knurled Surface On These Thumb Screws Provides Optimal Gripping Allowing The Screw To Be Tightened And Loosened By Hand Pressure Alone Eliminating The Need For Tools. Knurled Head Screws Are Common In Applications Requiring Frequent Fastening And Unfastening..
Features
- 10 pack/pieces knurled head 303 stainless steel thumb screws with shoulders and flat tips
- The knurled surface on these thumb screws provides optimal gripping allowing the screw to be tightened and loosened by hand pressure alone eliminating the need for tools. Knurled head screws are common in applications requiring frequent fastening and unfastening.
- Available in the following SAE thread sizes: 6-32, 8-32, 10-32, 1/4-20, 5/16-18 and 3/8-16
- Made from 303 stainless steel (SS) which is a strong, corrosion-resistant alloy with excellent resistance to heat. 303 SS is designed to be used in high-stress, outdoor and corrosive applications.
- Specifications: 1/4-20 threads, Head diameter: .750 inches, Head height: .3125 inches, Shoulder diameter: .500 inches, Shoulder height: .1875 inches, Thread length: .750 inches.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 0.50 x 2.00 x 0.50 Inches | Weight: 0.50 pounds
See On Amazon #24
BSI/Taytools Bob Smith Industries 15 Minute Mid-Cure (TM) 2 Part Epoxy 4.5 OZ Combined (1) f
Asin: B07VYSYG9W | Ean: 0737787285190 | UPC: 737787285190
Mid-Cure (Tm) Is Our Most Flexible Epoxy And Is Ideal For Gluing To Fiberglass Surfaces..
100% Made In The Usa!!.
Allow 45 Minutes Before Handling Parts And 2 Hours For Full Strength..
It Is More Water Resistant And Can Be Used As A Substitute For Quik-Cure (Tm) In Most Applications..
Features
- MID-CURE (TM) 15 min. epoxy is used in larger areas where more working time is needed.
- It is more water resistant and can be used as a substitute for QUIK-CURE (TM) in most applications.
- MID-CURE (TM) is our most flexible epoxy and is ideal for gluing to fiberglass surfaces.
- Allow 45 minutes before handling parts and 2 hours for full strength.
- 100% made in the USA!!
- See more on Amazon...
Brand: BSI / Taytools | Manufacturer: Bob Smith Industries BSI
Weight: 0.29 Pounds
See On Amazon #25
Taytools 10-Piece Set Nylon Reinforced Spring Clamp with Non-Marring Swivel Pads for Woodworking, Carpentry and DIY Applications (6 inch 10 Pack)
Asin: B09M2L2KF4 | Model: 388343 | PartNumber: 388343 | Ean: 0850026388343 | UPC: 850026388343
Pivoting Jaws Are Self-Adjusting And Allow Clamping Of Uneven Or Irregular Items. Pads Are Non-Marring And Swivel A Full 90 Degrees. Pads Are Secured In Place With Steel Pins To Prevent Falling Off.
Nylon Reinforced Plastic Handles Reduces Hand Fatigue And Make Clamping Easier. Inside Of Jaws Have Serrations For Gripping Round Objects
.
Tempered Steel Coil Springs Resists Fatigue And Apply Consistent Clamping Pressure. Springs Are Held In Place With A Screw For Added Strength And Durability.
Nylon Reinforced Plastic Handles Reduces Hand Fatigue And Make Clamping Easier. Inside Of Jaws Have Serrations For Gripping Round Objects.
Come As Set Of 10 Clamps.
Features
- These Taytools Nylon Spring Clamps are versatile, lightweight, easy to open, reposition and release making them the perfect clamping solution for the woodworker, hobbyist, crafter or DIY enthusiast. The ergonomic comfort grip handles combined with non-marring swivel pads allow securing a wide range of objects.
- Come as set of 10 clamps
- Pivoting jaws are self-adjusting and allow clamping of uneven or irregular items. Pads are non-marring and swivel a full 90 degrees. Pads are secured in place with steel pins to prevent falling off.
Nylon reinforced plastic handles reduces hand fatigue and make clamping easier. Inside of jaws have serrations for gripping round objects
- Nylon reinforced plastic handles reduces hand fatigue and make clamping easier. Inside of jaws have serrations for gripping round objects
- Tempered steel coil springs resists fatigue and apply consistent clamping pressure. Springs are held in place with a screw for added strength and durability
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
See On Amazon #26
Taytools 2 Each 3 3/4" Phenolic Tapered Handle Post Knob with 1/4 20 Threaded Insert for Shop Jigs and Fixtures PK-1/4X2
Asin: B01H123CGS | Ean: 0791617730281 | UPC: 791617730281
3 3/4" High X 1" In Diameter.
1/4 20 Threaded Brass Insert.
High Temperature And Impact Resistant Phonelic Construction.
Features
- Set of 2 knobs
- High temperature and impact resistant Phonelic construction
- 3 3/4 high x 1 in diameter
- 1/4 20 threaded brass insert
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 0.04 x 4.00 x 2.00 Inches | Weight: 0.22 pounds
See On Amazon #27
Japanese Style Max Size Awl Hardwood Handle Hardened High Carbon Steel Blade Very Sharp Point 5-1/2 Inches Long, 990 Inches Diameter JAMAX
Asin: B06XSDSW8J | Model: JA-MAX | PartNumber: JA-MAX | Ean: 0791617732377 | UPC: 791617732377
Hardwood Handle.
Tip Sharpened To Very Fine Point.
Hardened High Carbon Tool Steel Blade.
Larger Size At 5.5” Long By .900” In Diameter.
Features
- This larger size can be comfortably cupped in the hand for better control when doing precise work
- Larger size at 5.5 long by .900 in diameter
- Hardwood handle
- Hardened high carbon tool steel blade
- Tip sharpened to very fine point
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 1.30 x 6.50 x 1.30 Inches
See On Amazon #28
Taytools 469416 7 Inch Woodturning Double Ended Bowl Calipers, Overall Length 14-1/2 Inches, Black Metal Finish
Asin: B07DCBJSTG | Model: 469416 | PartNumber: 469416 | Ean: 0700667469416 | UPC: 700667469416
Caliper Measures 7 Inches From Pivot Point To The Tips. Maximum Measuring Depth 6-1/2"..
Made With Gun Metal Finished Steel And Solid Brass Hardware.
Overall Size Is 14-1/2 Inches.
The Double-Ended Design Means That Measurements Taken At One End Automatically Transfer To The Other End Allowing Accurate Reading Without Removing The Calipers From A Project.
Features
- Double-ended wood turner s calipers are designed to accurately and easily measure wall thicknesses and diameters in in hollow forms and bowls
- The double-ended design means that measurements taken at one end automatically transfer to the other end allowing accurate reading without removing the calipers from a project
- Caliper measures 7 inches from pivot point to the tips. Maximum measuring depth 6-1/2.
- Overall size is 14-1/2 inches
- Made with gun metal finished steel and solid brass hardware
- See more on Amazon...
Brand: Taytools | Manufacturer: TaylorToolworks
See On Amazon #29
Bundle Taytools 468631 Pack of 4 Each 3/4 x 2-1/4 Inches Bench Dogs Hold Downs for Workbenches, Anodized Aluminum, Side Springs
Asin: B07FRLZ9H3 | Model: 468631 | PartNumber: 468631 | Ean: 0700667468631 | UPC: 700667468631
These Dogs Are Just Under 3/4 Inch By 0.015 Inches So They Won’T Bind In The Hole, Yet The Side Spring Holds Them In Place At Any Desired Height..
The Dog Faces Have Cross Hatching And A 2 Degree Inward Slop To Better Grab And Hold Your Wood Tight To The Bench..
Made From Anodized Aluminum That Will Not Corrode Or Ruin A Cutting Iron Or Plane Is Accidently Struck..
Come In Packs Of 4 Each. Overall Length Is 2-1/4 Inches..
Features
- Bench dogs are an essential hold down device that should be a part of any workbench. Bench dogs will greatly improve the function of any bench. They allow securing work to the edge or top of your bench by using 3/4 inch holes. Install wherever you want simply by drilling a diameter hole.
- Come in packs of 4 each. Overall length is 2-1/4 inches.
- These dogs are just under 3/4 inch by 0.015 inches so they won t bind in the hole, yet the side spring holds them in place at any desired height.
- Made from anodized aluminum that will not corrode or ruin a cutting iron or plane is accidently struck.
- The dog faces have cross hatching and a 2 degree inward slop to better grab and hold your wood tight to the bench.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 2.00 x 5.00 x 5.00 Inches | Weight: 0.19 Pounds
See On Amazon