YG-1 - Buying Guide
Last Updated: 04/28/2024
Share on
Bestselling from YG-1 on Amazon
- YG-1 - F8403 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End,...
- YG-1 - F4483 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End...
- YG-1 G4 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Squar...
- YG-1 28593 Carbide Alu-Power End Mill, 3 Flute, 45 Degree Helix, Regular Length, Square, Uncoated Fi...
- YG-1 - G4315 G4 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank wi...
- YG-1 28573 Carbide Alu-Power End Mill, 3 Flute, 45 Degree Helix, Regular Length, Square, Uncoated Fi...
- YG-1 - F4485 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End...
- YG-1 - F4323 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End...
- YG-1 - F4243 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End...
- YG-1 28573TC Carbide Alu-Power End Mill, 3 Flute, 45 Degree Helix, Regular Length, Square, TiCN Fini...
#1
YG-1 - F8403 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 1/4"-20 Thread Size, H3 Tolerance
Asin: B00F8TXMKI | Model: F8403 | PartNumber: F8403 | Ean: 5899405984351
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.625-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Nitride Coatings Add A Hard Layer Of Gold-Colored Ceramic To The Surface That Extends Tool Life And Permits Faster Cutting Speeds Than Uncoated Tools.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.625-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.07 pounds
See On Amazon #2
YG-1 - F4483 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 3/8"-16 Thread Size, H3 Tolerance
Asin: B00F8T68OK | Model: F4483 | PartNumber: F4483 | Ean: 7535001296945
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.75-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.75-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.07 pounds
See On Amazon #3
YG-1 G4 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, M5-0.8 Thread Size, D4 Tolerance -G4284
Asin: B00F8UQYEI | Model: G4284 | PartNumber: G4284 | Ean: 7241871141598
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.5-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.5-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #4
YG-1 28593 Carbide Alu-Power End Mill, 3 Flute, 45 Degree Helix, Regular Length, Square, Uncoated Finish, 3" Length, 1/2"
Asin: B0080AVYFW | Model: 28593 | PartNumber: 28593 | Ean: 0312333756494 | UPC: 312333756494
Improved Surface Roughness-Cylindrical Margin Which Is Controlled Tightly.
Superior Chip Evacuation.
Maximum-Metal Removal Rate.
3Flute And 45° Helix Allow Harmonic Balance At High Speed Condition And Smooth Cutting.
Features
- High velocity milling of aluminum & other non-ferrous materials
- 3flute and 45 helix allow harmonic balance at high speed condition and smooth cutting
- Improved surface roughness-cylindrical margin which is controlled tightly
- Maximum-metal removal rate
- Superior chip evacuation
- See more on Amazon...
First Available: 11/25/2017
Brand: YG-1 | Manufacturer: YG-1
Dimensions: 0.04 x 3.00 x 0.50 Inches
See On Amazon #5
YG-1 - G4315 G4 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, M6-1 Thread Size, D5 Tolerance
Asin: B00F8UR51Y | Model: G4315 | PartNumber: G4315
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.625-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.625-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #6
YG-1 28573 Carbide Alu-Power End Mill, 3 Flute, 45 Degree Helix, Regular Length, Square, Uncoated Finish, 2-1/2" Length, 1/4"
Asin: B0080AVSTY | Model: 28573 | PartNumber: 28573 | Ean: 0635963995300 | UPC: 635963995300
Improved Surface Roughness-Cylindrical Margin Which Is Controlled Tightly.
Superior Chip Evacuation.
Maximum-Metal Removal Rate.
3Flute And 45° Helix Allow Harmonic Balance At High Speed Condition And Smooth Cutting.
Features
- High velocity milling of aluminum & other non-ferrous materials
- 3flute and 45 helix allow harmonic balance at high speed condition and smooth cutting
- Improved surface roughness-cylindrical margin which is controlled tightly
- Maximum-metal removal rate
- Superior chip evacuation
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Dimensions: 0.04 x 2.50 x 0.25 inches | Weight: 0.07 pounds
See On Amazon #7
YG-1 - F4485 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 3/8"-16 Thread Size, H5 Tolerance
Asin: B00F8T6F0M | Model: F4485 | PartNumber: F4485
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.75-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.75-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #8
YG-1 - F4323 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 10-24 Thread Size, H3 Tolerance
Asin: B00F8T4ST2 | Model: F4323 | PartNumber: F4323 | Ean: 5899405916703
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.5-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.5-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.02 pounds
See On Amazon #9
YG-1 - F4243 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 6-32 Thread Size, H3 Tolerance
Asin: B00F8T45AE | Model: F4243 | PartNumber: F4243 | Ean: 5899406037711
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.375-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.375-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #10
YG-1 28573TC Carbide Alu-Power End Mill, 3 Flute, 45 Degree Helix, Regular Length, Square, TiCN Finish, 2-1/2" Length, 1/4"
Asin: B0080AW41K | Model: 28573TC | PartNumber: 28573TC | Ean: 0635963995317 | UPC: 635963995317
Improved Surface Roughness-Cylindrical Margin Which Is Controlled Tightly.
Superior Chip Evacuation.
Maximum-Metal Removal Rate.
3Flute And 45° Helix Allow Harmonic Balance At High Speed Condition And Smooth Cutting.
Features
- High velocity milling of aluminum & other non-ferrous materials
- 3flute and 45 helix allow harmonic balance at high speed condition and smooth cutting
- Improved surface roughness-cylindrical margin which is controlled tightly
- Maximum-metal removal rate
- Superior chip evacuation
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.07 pounds
See On Amazon #11
YG-1 - F8405 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 1/4"-20 Thread Size, H5 Tolerance
Asin: B00F8TXV8G | Model: F8405 | PartNumber: F8405 | Ean: 5899405992561
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.625-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Nitride Coatings Add A Hard Layer Of Gold-Colored Ceramic To The Surface That Extends Tool Life And Permits Faster Cutting Speeds Than Uncoated Tools.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.625-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.04 pounds
See On Amazon #12
YG-1 28558 Carbide Alu-Power End Mill, 3 Flute, 45 Degree Helix, Regular Length, Square, Uncoated Finish, 1-1/2" Length, 1/8"
Asin: B0080AVQRI | Model: 28558 | PartNumber: 28558 | Ean: 0635963995263 | UPC: 635963995263
Improved Surface Roughness-Cylindrical Margin Which Is Controlled Tightly.
Superior Chip Evacuation.
Maximum-Metal Removal Rate.
3Flute And 45° Helix Allow Harmonic Balance At High Speed Condition And Smooth Cutting.
Features
- High velocity milling of aluminum & other non-ferrous materials
- 3flute and 45 helix allow harmonic balance at high speed condition and smooth cutting
- Improved surface roughness-cylindrical margin which is controlled tightly
- Maximum-metal removal rate
- Superior chip evacuation
- See more on Amazon...
First Available: 05/15/2017
Brand: YG-1 | Manufacturer: YG-1
See On Amazon #13
YG-1 - F4423 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/4"-28 Thread Size, H3 Tolerance
Asin: B00F8T5I9G | Model: F4423 | PartNumber: F4423 | Ean: 7535001119695
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.625-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.625-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #14
YG-1 - F4283 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 8-32 Thread Size, H3 Tolerance
Asin: B00F8T4BXU | Model: F4283 | PartNumber: F4283
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.375-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.375-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #15
YG-1 - F4343 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 10-32 Thread Size, H3 Tolerance
Asin: B00F8T4Z18 | Model: F4343 | PartNumber: F4343 | Ean: 7241871141567
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.5-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.5-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 Pounds
See On Amazon #16
YG-1 G4 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, M4-0.7 Thread Size, D4 Tolerance
Asin: B00F8UQR68 | Model: G4244 | PartNumber: G4244 | Ean: 5899405926283
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.375-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.375-inches thread length
- See more on Amazon...
First Available: 12/12/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #17
YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3" Overall Length, 0.125" Cutting Diameter, 0.125" Shank Diameter
Asin: B0080C5B72 | Model: 55558 | PartNumber: 55558
Four Flutes Produce A Better Finish Than Fewer Flutes.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Four flutes produce a better finish than fewer flutes
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #18
YG-1 28565TC Carbide Alu-Power End Mill, 3 Flute, 45 Degree Helix, Regular Length, Square, TiCN Finish, 2" Length, 3/16"
Asin: B0080AW30C | Model: 28565TC | PartNumber: 28565TC | Ean: 0635963995294 | UPC: 635963995294
Improved Surface Roughness-Cylindrical Margin Which Is Controlled Tightly.
Superior Chip Evacuation.
Maximum-Metal Removal Rate.
3Flute And 45° Helix Allow Harmonic Balance At High Speed Condition And Smooth Cutting.
Features
- High velocity milling of aluminum & other non-ferrous materials
- 3flute and 45 helix allow harmonic balance at high speed condition and smooth cutting
- Improved surface roughness-cylindrical margin which is controlled tightly
- Maximum-metal removal rate
- Superior chip evacuation
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
See On Amazon #19
YG-1 E5014 Carbide Ball Nose End Mill, Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2.5" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter
Asin: B0080CVVJY | Model: 50565 | PartNumber: 50565
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Ball Nose End Mills (Also Called Ball End) Create Contoured Surfaces.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
Features
- Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Ball nose end mills (also called ball end) create contoured surfaces
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #20
YG-1 Z9 Series Vanadium Alloy HSS Roll Form Tap with Oil Groove, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, M5-0.8 Thread Size, D7 Tolerance
Asin: B00F8ZT2LK | Model: Z9287 | PartNumber: Z9287 | Ean: 7241871141680
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Right-Hand Cut Tools Have A Cutting Action That Engages When They Are Run In A Clockwise Direction.
Straight Flute Tools Allow Chips To Collect In The Flutes As They Cut And Are Well Suited For Most Applications In Shallow Cuts.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
- Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #21
YG-1 - 54904 E5026 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Non-Center Cutting, 30 Deg Helix, 2 Flutes, 4" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter
Asin: B0080CAGYK | Model: 54904 | PartNumber: 54904
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for general-purpose machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.10 pounds
See On Amazon #22
YG-1 - F4563 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/2"-13 Thread Size, H3 Tolerance
Asin: B00F8T88GG | Model: F4563 | PartNumber: F4563 | Ean: 7535001207460
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.9375-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.9375-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #23
1/4" YG1 Alu-Power 3 Flute Long Length Carbide End Mill for Aluminum
Asin: B01990IJ9K | Ean: 0635963995461 | UPC: 635963995461
High Velocity Milling Of Aluminum And Other Non-Ferrous Materials.
3 Flute And 45-Degree Helix Allow Harmonic Balance At High Speed Condition And Smooth Cutting.
1/4" Diameter X 1-1/4" Length Of Cut X 3-1/4" Overall Length.
Features
- Our part # YG1-36573
- 1/4 diameter x 1-1/4 length of cut x 3-1/4 overall length
- High velocity milling of Aluminum and other non-ferrous materials
- 3 flute and 45-degree helix allow harmonic balance at high speed condition and smooth cutting
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 America Inc.
Weight: 0.07 pounds
See On Amazon #24
HARKY - F4443 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 5/16"-18 Thread Size, H3 Tolerance
Asin: B00F8T5O36 | Model: F4443 | PartNumber: F4443
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.6875-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.6875-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #25
YG-1 - 52901 E5018 Carbide Ball Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 6" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080D4SMU | Model: 52901 | PartNumber: 52901
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Ball Nose End Mills (Also Called Ball End) Create Contoured Surfaces.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Ball nose end mills (also called ball end) create contoured surfaces
- See more on Amazon...
First Available: 11/25/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #26
YG-1 BI Series Super HSS Spiral Flute Tap, Hardslick Coated, Round Shank with Square End, Modified Bottoming Chamfer, 1/4"-20 Thread Size, H5 Tolerance
Asin: B00F8QH1C6 | Model: BI405 | PartNumber: BI405
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.433-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Hardslick Coated.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Hardslick coated
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.433-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Amazon Price: $25.08 | as of 04/28/2024
(11:03pm pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #27
YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter
Asin: B0080C5MJ4 | Model: 55904 | PartNumber: 55904 | Ean: 0200000559045 | UPC: 200000559045
Four Flutes Produce A Better Finish Than Fewer Flutes.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Four flutes produce a better finish than fewer flutes
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Dimensions: 0.39 x 5.51 x 0.39 inches | Weight: 0.04 pounds
See On Amazon #28
YG-1 G1 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Modified Bottoming Chamfer, 4-40 Thread Size, H2 Tolerance
Asin: B00F8UAOJO | Model: G1162 | PartNumber: G1162 | Ean: 7241871141635
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.3125-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Nitride Coatings Add A Hard Layer Of Gold-Colored Ceramic To The Surface That Extends Tool Life And Permits Faster Cutting Speeds Than Uncoated Tools.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.3125-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.02 pounds
See On Amazon #29
YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 5-40 Thread Size, H2 Tolerance
Asin: B00F8TWGXC | Model: F8202 | PartNumber: F8202 | Ean: 7241871094603
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.3125-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Nitride Coatings Add A Hard Layer Of Gold-Colored Ceramic To The Surface That Extends Tool Life And Permits Faster Cutting Speeds Than Uncoated Tools.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.3125-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #30
YG-1 - 9322 E2175 Cobalt Steel Square Nose End Mill, Extra Long Reach, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 6 Flutes, 5" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080D63S2 | Model: 09322 | PartNumber: 09322
Center-Cutting Design Allows The End Mill To Plunge Into Material Like A Drill Bit While Also Performing Conventional Surface Milling.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
Cobalt Steel Resists Abrasion And High Cutting Temperatures, And Has Higher Feed Rates Than High-Speed Steel.
Six Flutes Produce A Better Finish Than Fewer Flutes.
Features
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Six flutes produce a better finish than fewer flutes
- Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling
- Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.25 pounds
See On Amazon