Frontpage > Product > Cr Skf Seals Speedi Sleeve 3"Id X .813"Wide 99300

CR SKF Seals Speedi Sleeve 3"Id X .813"Wide 99300

Asin: B001I3YWS4   |   Model: 99300   |   PartNumber: 99300

As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.

Const: Ssleeve, Message: Shaft Range 3.000 - 3.006, Boretite: N, Size-Ptr: G.
Cross To: National Seal 99300, Victor 99300Rs.
Shaft(Mm): 76.280, Bore(Mm): 0.000, Outside Diameter:(Mm)82.170, Width:(Mm) 20.650.

Features

  • Shaft(in): 3.000, Bore(in): 0.000, Outside Diameter:(in)3.235, Width:(in) 0.813
  • Shaft(mm): 76.280, Bore(mm): 0.000, Outside Diameter:(mm)82.170, Width:(mm) 20.650
  • Const: SSLEEVE, Message: SHAFT RANGE 3.000 - 3.006, Boretite: N, SIZE-PTR: G
  • Cross to: National Seal 99300, Victor 99300RS
  • See more on Amazon...

Brand: SKF   |   Manufacturer: CR SKF

Weight: 0.23 Pounds

Amazon Price: $67.00 | as of 06/01/2024 (3:10am pst) *DETAILS
Availability: In Stock

See On Amazon




Similar To CR SKF Seals Speedi Sleeve

  #1

SKF 99868 Speedi Sleeve and Tool Kit, Inch, 1" Shaft Diameter, 0.688" Width

Asin: B00D0IFI9W   |   Model: 99868   |   PartNumber: 99868   |   Ean: 0085311501958   |   UPC: 085311501958

"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.

Features

  • The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
  • The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
  • SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
  • Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
  • While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
  • See more on Amazon...

Brand: SKF   |   Manufacturer: SKF

Dimensions: 2.00 x 4.40 x 4.40 inches   |   Weight: 2.02 pounds

Amazon Price: $25.80 | as of 06/01/2024 (3:10am pst) *DETAILS

See On Amazon




  #2

SKF 99116 Speedi Sleeve and Tool Kit, Inch, 1.125in Shaft Diameter, 0.375in Width

Asin: B00460DH5U   |   Model: 99116   |   PartNumber: 99116   |   Ean: 0085311158978   |   UPC: 085311158978

"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.

Features

  • The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
  • The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
  • SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
  • Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
  • While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
  • See more on Amazon...

Brand: SKF   |   Manufacturer: SKF USA

Dimensions: 3.94 x 9.84 x 0.91 inches

Amazon Price: $29.39 | as of 06/01/2024 (3:10am pst) *DETAILS

See On Amazon




  #3

SKF 99125 Speedi Sleeve and Tool Kit, Inch, 1.25in Shaft Diameter, 313in Width

Asin: B000EPR7E8   |   Model: 99128   |   PartNumber: 99128   |   Ean: 0085311041263   |   UPC: 085311041263

"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.

Features

  • The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
  • The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
  • SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
  • Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
  • While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
  • See more on Amazon...

Brand: SKF   |   Manufacturer: SKF USA

Dimensions: 1.75 x 4.25 x 4.25 inches   |   Weight: 0.02 pounds

Warranty: One Year Warranty

Amazon Price: $28.75 | as of 06/01/2024 (3:10am pst) *DETAILS
List Price: $32.72

See On Amazon




  #4

SKF 99182 Speedi Sleeve and Tool Kit, Inch, 1.693in Shaft Diameter, 0.5in Width

Asin: B000EPOHVY   |   Model: 99182   |   PartNumber: 99182   |   Ean: 0085311902656   |   UPC: 085311902656

"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.

Features

  • The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
  • The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
  • SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
  • Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
  • While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
  • See more on Amazon...

Brand: SKF   |   Manufacturer: SKF USA

Dimensions: 1.75 x 4.25 x 4.25 inches

Warranty: One Year Warranty

Amazon Price: $30.04 | as of 06/01/2024 (3:10am pst) *DETAILS

See On Amazon




  #5

SKF 99324 Speedi Sleeve, Inch, 3.25in Shaft Diameter, 0.813in Width

Asin: B002FT4ZO6   |   Model: 99324   |   PartNumber: 99324   |   Ean: 0085311042376   |   UPC: 085311042376

"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.

Features

  • The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
  • The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
  • SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
  • Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
  • While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
  • See more on Amazon...

Brand: SKF   |   Manufacturer: SKF USA

Dimensions: 3.94 x 9.84 x 0.91 inches

Amazon Price: $34.42 | as of 06/01/2024 (3:10am pst) *DETAILS

See On Amazon




  #6

SKF 18771 Transfer Case Rear Output Shaft Seal SKF Patented Speedi Sleeve and Seal Kit Compatible with American Motors Eagle Chevrolet 1/2 Ton C1500 K1500

Asin: B000C05ODG   |   Model: 18771   |   PartNumber: 18771   |   Ean: 0085311154628   |   UPC: 085311154628

Seal Lip Profile All Skf Seals Incorporate A Seal Lip Design That Meets Or Exceeds The Oe Specifications. This Provides The Toughest Exclusion Of Dirt And Contaminants, Reliable Dynamic Sealing And A Long Service Life..
The Case Components Are Made From The Highest Grade Of Carbon Steel, And Are Coated With Phosphate To Ensure Protection Against Rust. Most Metal-Cased Seals Are Coated With Bore-Tite, A Flexible Coating On The Outside Diameter Of The Seal That Fills In Small Housing Bore Imperfections, And Provides A Tight And Leak Proof Seal..
Sealing Element Skf’S Synthetic Rubber Blends Are Formulated From Families Of Complex Polymers To Provide Protection To Operate In Temperatures As Low As Minus 40 Degrees To As High As 400 Degrees Fahrenheit. Today’S Lubricants With Their Aggressive Additive Packages Can Attack The Rubber Compound Of The Seal. Skf Seals Are Engineered To Be Compatible With These Lubricants.
Skf Has A Long History In Sealing Knowledge. From Our Patent On The First Automotive Wheel Seal In 1928, We Have Evolved To A Leading Supplier Of Automotive And Truck Sealing Technology. The Demand For Increased Speeds, Higher Operating Temperatures And Synthetic Lubricants With Aggressive Additives Increase The Stress On Oil And Grease Seals. Skf Seals Deliver Unparalleled Performance Over A Wide Range Of Operating Conditions For Most Automotive And Truck Applications..

Features

  • Specifications: Shaft Dia in/mm: 1.875/47.625 | Bore Dia in/mm: 2.750/69.850 | Outer Dia in/mm: 2.754/69.850 | Width in/mm: 0.500/12.700 | Seal Construction Type:D4 | Seal Lip Material:Vamac/Teflon | Boretite: Yes
  • SKF has a long history in sealing knowledge. From our patent on the first automotive wheel seal in 1928, we have evolved to a leading supplier of automotive and truck sealing technology. The demand for increased speeds, higher operating temperatures and synthetic lubricants with aggressive additives increase the stress on oil and grease seals. SKF seals deliver unparalleled performance over a wide range of operating conditions for most automotive and truck applications.
  • Seal lip profile All SKF seals incorporate a seal lip design that meets or exceeds the OE specifications. This provides the toughest exclusion of dirt and contaminants, reliable dynamic sealing and a long service life.
  • Sealing element SKF s synthetic rubber blends are formulated from families of complex polymers to provide protection to operate in temperatures as low as minus 40 degrees to as high as 400 degrees Fahrenheit. Today s lubricants with their aggressive additive packages can attack the rubber compound of the seal. SKF seals are engineered to be compatible with these lubricants
  • The case components are made from the highest grade of carbon steel, and are coated with phosphate to ensure protection against rust. Most metal-cased seals are coated with Bore-Tite, a flexible coating on the outside diameter of the seal that fills in small housing bore imperfections, and provides a tight and leak proof seal.
  • See more on Amazon...

Brand: SKF   |   Manufacturer: SKF

Dimensions: 0.63 x 3.63 x 3.63 Inches   |   Weight: 0.15 Pounds

Warranty: 12 Month 12,000 Miles

Amazon Price: $12.05 | as of 06/01/2024 (3:10am pst) *DETAILS

See On Amazon




  #7

SKF 99260 Speedi Sleeve and Tool Kit, Inch, 2.625in Shaft Diameter, 0.5in Width

Asin: B00CLIN5DI   |   Model: 99260   |   PartNumber: 99260   |   Ean: 0085311042024   |   UPC: 085311042024

"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.

Features

  • The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
  • The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
  • SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
  • Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
  • While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
  • See more on Amazon...

Brand: SKF   |   Manufacturer: SKF USA

Dimensions: 0.00 x 0.00 x 0.00 Centimeters

Amazon Price: $34.43 | as of 06/01/2024 (3:10am pst) *DETAILS
List Price: $37.62

See On Amazon




  #8

SKF 99171 Speedi Sleeve and Tool Kit, Inch, 1.718in Shaft Diameter, 0.563in Width

Asin: B000EPR7FW   |   Model: 99171   |   PartNumber: 99171   |   Ean: 0085311041522   |   UPC: 085311041522

"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.

Features

  • The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
  • The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
  • SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
  • Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
  • While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
  • See more on Amazon...

Brand: SKF   |   Manufacturer: SKF USA

Dimensions: 1.75 x 4.25 x 4.25 inches   |   Weight: 0.15 pounds

Amazon Price: $30.85 | as of 06/01/2024 (3:10am pst) *DETAILS
List Price: $36.35

See On Amazon




  #9

SKF 99161 Speedi Sleeve and Tool Kit, Inch, 1.625in Shaft Diameter, 0.313in Width

Asin: B00CLINW6I   |   Model: 99161   |   PartNumber: 99161   |   Ean: 0085311041454   |   UPC: 085311041454

"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.

Features

  • The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
  • The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
  • SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
  • Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
  • While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
  • See more on Amazon...

Brand: SKF   |   Manufacturer: SKF

Dimensions: 3.94 x 9.84 x 0.91 inches   |   Weight: 0.00 pounds

Amazon Price: $31.80 | as of 06/01/2024 (3:10am pst) *DETAILS
List Price: $37.00 | Used Price: $19.90

See On Amazon




  #10

SKF 99193 Speedi Sleeve and Tool Kit, Inch, 1.937in Shaft Diameter, 0.563in Width

Asin: B000EPR7GQ   |   Model: 99193   |   PartNumber: 99193   |   Ean: 0085311041690   |   UPC: 085311041690

"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.

Features

  • The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
  • The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
  • SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
  • Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
  • While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
  • See more on Amazon...

Brand: SKF   |   Manufacturer: SKF USA

Dimensions: 1.75 x 4.25 x 4.25 inches   |   Weight: 0.05 pounds

Amazon Price: $31.44 | as of 06/01/2024 (3:10am pst) *DETAILS
List Price: $33.57

See On Amazon




  #11

SKF 99338 Speedi Sleeve, Inch, 3.375in Shaft Diameter, 0.813in Width

Asin: B002ESPX0I   |   Model: 99338   |   PartNumber: 99338   |   Ean: 0085311042444   |   UPC: 085311042444

"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.

Features

  • The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
  • The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
  • SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
  • Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
  • While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
  • See more on Amazon...

Brand: SKF   |   Manufacturer: SKF

Dimensions: 3.94 x 9.84 x 0.91 inches

Amazon Price: $52.35 | as of 06/01/2024 (3:10am pst) *DETAILS

See On Amazon




  #12

SKF 99250 Speedi Sleeve and Tool Ki, Inch, 2.503in Shaft Diameter, 0.781in Width

Asin: B000EPPAVU   |   Model: 99250   |   PartNumber: 99250   |   Ean: 0085311041966   |   UPC: 085311041966

"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.

Features

  • The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
  • The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
  • SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
  • Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
  • While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
  • See more on Amazon...

Brand: SKF   |   Manufacturer: SKF USA

Dimensions: 1.75 x 4.25 x 4.25 inches

Warranty: One Year Warranty

Amazon Price: $40.09 | as of 06/01/2024 (3:10am pst) *DETAILS

See On Amazon




  #13

SKF 99249 Speedi Sleeve, Inch, 2.492in Shaft Diameter, 0.781in Width

Asin: B00460HD2S   |   Model: 99249   |   PartNumber: 99249   |   Ean: 0085311041959   |   UPC: 085311041959

"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.

Features

  • The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
  • The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
  • SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
  • Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
  • While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
  • See more on Amazon...

Brand: SKF   |   Manufacturer: SKF

Dimensions: 3.94 x 9.84 x 0.91 inches

Amazon Price: $33.62 | as of 06/01/2024 (3:10am pst) *DETAILS

See On Amazon




  #14

SKF 99086 Speedi Sleeve and Tool Kit, Inch, 0.859in Shaft Diameter, 0.2500in Width

Asin: B000EPOHRI   |   Model: 99086   |   PartNumber: 99086   |   Ean: 0085311041096   |   UPC: 085311041096

"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.

Features

  • The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
  • The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
  • SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
  • Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
  • While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
  • See more on Amazon...

Brand: SKF   |   Manufacturer: SKF USA

Dimensions: 1.75 x 4.25 x 4.25 inches   |   Weight: 0.12 Pounds

Warranty: One Year Warranty

Amazon Price: $27.28 | as of 06/01/2024 (3:10am pst) *DETAILS

See On Amazon




  #15

SKF 99163 Speedi Sleeve and Tool Kit, Inch, 1.614in Shaft Diameter, 0.500in Width

Asin: B000CKNXRA   |   Model: 99163   |   PartNumber: 99163   |   Ean: 0085311041461, 0085311902649   |   UPC: 085311041461, 085311902649

"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.

Features

  • The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
  • The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
  • SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
  • Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
  • While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
  • See more on Amazon...

Brand: SKF   |   Manufacturer: SKF USA

Dimensions: 3.94 x 9.84 x 0.91 inches   |   Weight: 0.15 Pounds

Amazon Price: $28.17 | as of 06/01/2024 (3:10am pst) *DETAILS
List Price: $37.00

See On Amazon




  #16

SKF 99238 Speedi Sleeve, Inch, 2.375in Shaft Diameter, 0.781in Width

Asin: B00CLINERU   |   Model: 99238   |   PartNumber: 99238   |   Ean: 0085311041898   |   UPC: 085311041898

"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.

Features

  • The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
  • The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
  • SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
  • Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
  • While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
  • See more on Amazon...

Brand: SKF   |   Manufacturer: SKF USA

Dimensions: 0.00 x 0.00 x 0.00 Centimeters   |   Weight: 0.20 Pounds

Amazon Price: $38.14 | as of 06/01/2024 (3:10am pst) *DETAILS
List Price: $43.64

See On Amazon




  #17

SKF 99325 Speedi Sleeve and Tool Kit, Inch, 3.253in Shaft Diameter, 0.813in Width

Asin: B000EPOHXW   |   Model: 99325   |   PartNumber: 99325   |   Ean: 0085311042383   |   UPC: 085311042383

"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.

Features

  • The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
  • The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
  • SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
  • Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
  • While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
  • See more on Amazon...

Brand: SKF   |   Manufacturer: SKF USA

Dimensions: 1.75 x 4.25 x 4.25 inches

Warranty: One Year Warranty

Amazon Price: $34.84 | as of 06/01/2024 (3:10am pst) *DETAILS

See On Amazon




  #18

SKF 99212 Speedi Sleeve and Tool Kit, Inch, 2.125in Shaft Diameter, 0.781in Width

Asin: B000EPR7HA   |   Model: 99212   |   PartNumber: 99212   |   Ean: 0085311041768   |   UPC: 085311041768

"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.

Features

  • The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
  • The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
  • SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
  • Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
  • While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
  • See more on Amazon...

Brand: SKF   |   Manufacturer: SKF USA

Dimensions: 1.75 x 4.25 x 4.25 inches   |   Weight: 0.05 Pounds

Warranty: One Year Warranty

Amazon Price: $39.89 | as of 06/01/2024 (3:10am pst) *DETAILS

See On Amazon




  #19

SKF 99225 Speedi Sleeve and Tool Kit, Inch, 2.252in Shaft Diameter, 0.781in Width

Asin: B000C05QIO   |   Model: 99225   |   PartNumber: 99225   |   Ean: 0085311041799   |   UPC: 085311041799

"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.

Features

  • The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
  • The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
  • SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
  • Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
  • While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
  • See more on Amazon...

Brand: SKF   |   Manufacturer: SKF USA

Dimensions: 1.75 x 4.25 x 4.25 inches   |   Weight: 0.20 Pounds

Warranty: One Year Warranty

Amazon Price: $34.59 | as of 06/01/2024 (3:10am pst) *DETAILS
List Price: $42.18

See On Amazon




  #20

SKF 38750 CR Seal, 1 Pack

Asin: B001DBSSKE   |   Model: 38750   |   PartNumber: 38750   |   Ean: 0085311033923   |   UPC: 085311033923

Constant: Scot1, Lip: R, Message: Scot Seal, Bore-Tite: Y, Size-Ptr: H.
Cross To: Cr Industries 1214, Stemco 3909012, Stemco 3909056, Stemco 3929012, Stemco 3929099, Mechanic.
Shaft(Mm): 98.430, Bore(Mm): 139.730, Outside Diameter:(Mm)139.850, Width:(Mm) 23.830.

Features

  • Shaft(in): 3.875, bore(in): 5.501, outside diameter:(in)5.506, width:(in) 0.938
  • Shaft(mm): 98.430, bore(mm): 139.730, outside diameter:(mm)139.850, width:(mm) 23.830
  • Constant: Scot1, lip: R, message: scot seal, bore-tite: Y, size-PTR: H
  • Cross to: CR industries 1214, stemco 3909012, stemco 3909056, stemco 3929012, stemco 3929099, Mechanic
  • See more on Amazon...

First Available: 08/09/2018

Brand: SKF   |   Manufacturer: SKF

Dimensions: 6.00 x 6.00 x 2.00 Inches   |   Weight: 0.50 Pounds

Amazon Price: $31.99 | as of 06/01/2024 (3:10am pst) *DETAILS

See On Amazon





Looking For Something Else? Search

Home & Garden


Home Improvement


Industrial


Electronics


Office


Car & Automotive


Sporting Goods


Beauty Supplies


Health & Personal Care


Fashion


Toys and Hobby



Additional Categories


| GistGear © 2021 |

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.
As an Amazon Associate we earn from qualifying purchases.