SKF 99840 Speedi Sleeve, Inch, 2.5in Shaft Diameter, 0.500in Width
Asin: B00460N35O | Model: 99840 | PartNumber: 99840 | Ean: 0085311185929 | UPC: 085311185929
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional."Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 3.94 x 9.84 x 0.91 inches
See On Amazon Similar To SKF 99840 Speedi Sleeve Inch
#1
SKF 99167 Speedi Sleeve and Tool Kit, Inch, 1.688in Shaft Diameter, 0.313in Width
Asin: B00460FFQE | Model: 99167 | PartNumber: 99167 | Ean: 0085311041485 | UPC: 085311041485
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 3.94 x 9.84 x 0.91 inches
See On Amazon #2
SKF 99161 Speedi Sleeve and Tool Kit, Inch, 1.625in Shaft Diameter, 0.313in Width
Asin: B00CLINW6I | Model: 99161 | PartNumber: 99161 | Ean: 0085311041454 | UPC: 085311041454
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 3.94 x 9.84 x 0.91 inches | Weight: 0.00 pounds
See On Amazon #3
SKF 99868 Speedi Sleeve and Tool Kit, Inch, 1" Shaft Diameter, 0.688" Width
Asin: B00D0IFI9W | Model: 99868 | PartNumber: 99868 | Ean: 0085311501958 | UPC: 085311501958
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 2.00 x 4.40 x 4.40 inches | Weight: 2.02 Pounds
See On Amazon #4
SKF 99171 Speedi Sleeve and Tool Kit, Inch, 1.718in Shaft Diameter, 0.563in Width
Asin: B000EPR7FW | Model: 99171 | PartNumber: 99171 | Ean: 0085311041522 | UPC: 085311041522
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 inches | Weight: 0.15 pounds
See On Amazon #5
SKF 99116 Speedi Sleeve and Tool Kit, Inch, 1.125in Shaft Diameter, 0.375in Width
Asin: B00460DH5U | Model: 99116 | PartNumber: 99116 | Ean: 0085311158978 | UPC: 085311158978
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 3.94 x 9.84 x 0.91 inches
See On Amazon #6
SKF 99250 Speedi Sleeve and Tool Ki, Inch, 2.503in Shaft Diameter, 0.781in Width
Asin: B000EPPAVU | Model: 99250 | PartNumber: 99250 | Ean: 0085311041966 | UPC: 085311041966
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 inches
Warranty: One Year Warranty
See On Amazon #7
SKF 99163 Speedi Sleeve and Tool Kit, Inch, 1.614in Shaft Diameter, 0.500in Width
Asin: B000CKNXRA | Model: 99163 | PartNumber: 99163 | Ean: 0085311041461, 0085311902649 | UPC: 085311041461, 085311902649
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 3.94 x 9.84 x 0.91 inches | Weight: 0.15 pounds
See On Amazon #8
SKF 99193 Speedi Sleeve and Tool Kit, Inch, 1.937in Shaft Diameter, 0.563in Width
Asin: B000EPR7GQ | Model: 99193 | PartNumber: 99193 | Ean: 0085311041690 | UPC: 085311041690
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 inches | Weight: 0.05 Pounds
See On Amazon #9
SKF 99826 Speedi Sleeve, Inch, 1.625in Shaft Diameter, 0.563in Width
Asin: B00460G3GU | Model: 99826 | PartNumber: 99826 | Ean: 0085311185837 | UPC: 085311185837
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 3.94 x 9.84 x 0.91 inches
See On Amazon #10
SKF 99845 Speedi Sleeve, Inch, 2.838in Shaft Diameter, 0.500in Width
Asin: B00460KTWO | Model: 99845 | PartNumber: 99845 | Ean: 0085311185974 | UPC: 085311185974
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
See On Amazon #11
SKF 11740 LDS & Small Bore Seal, R Lip Code, CRW1 Style, Inch, 1.188" Shaft Diameter, 1.828" Bore Diameter, 0.375" Width
Asin: B002FSVH3O | Model: 11740 | PartNumber: 11740 | Ean: 0085311010535 | UPC: 085311010535
Optimized Compounds Perform Reliably In Extreme Operating Conditions.
Excellent Contamination Exclusion.
Superior Fluid And Temperature Compatibility.
Keeps Lubricants In And Contaminants Out.
Features
- SKF 11740 LDS & Small Bore Seal, R Lip Code, CRW1 Style, Inch, 1.188" Shaft Diameter, 1.828" Bore Diameter, 0.375" Width
- Keeps Lubricants in and Contaminants Out
- Optimized Compounds Perform Reliably In Extreme Operating Conditions
- Superior Fluid And Temperature Compatibility
- Excellent Contamination Exclusion
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 3.94 x 9.84 x 0.37 inches
Warranty: 12 Month 12,000 Miles
See On Amazon #12
SKF 99472 Speedi Sleeve, Inch, 4.803in Shaft Diameter, 0.787in Width
Asin: B00CLIM06Q | Model: 99472 | PartNumber: 99472 | Ean: 0085311042925 | UPC: 085311042925
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 3.94 x 9.84 x 0.91 inches
See On Amazon #13
SKF 99869 Speedi Sleeve and Tool Kit, Inch, 2.362" Shaft Diameter, 0.787" Width
Asin: B00460MSTQ | Model: 99869 | PartNumber: 99869 | Ean: 0085311397582 | UPC: 085311397582
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
First Available: 05/15/2017
Brand: SKF | Manufacturer: SKF USA
Dimensions: 3.94 x 9.84 x 0.91 inches
See On Amazon #14
SKF 99814 Speedi Sleeve, Inch, 1in Shaft Diameter, 0.313in Width
Asin: B004609G1E | Model: 99814 | PartNumber: 99814 | Ean: 0085311185646 | UPC: 085311185646
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 3.94 x 9.84 x 0.91 inches
See On Amazon #15
SKF 99835 Speedi Sleeve, Inch, 2in Shaft Diameter, 0.875in Width
Asin: B00460E3K8 | Model: 99835 | PartNumber: 99835 | Ean: 0085311185875 | UPC: 085311185875
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
See On Amazon #16
SKF 99241 Speedi Sleeve, Inch, 2.362in Shaft Diameter, 0.370in Width
Asin: B00CLIND6W | Model: 99241 | PartNumber: 99241 | Ean: 0085311041911 | UPC: 085311041911
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 3.94 x 9.84 x 0.91 inches
See On Amazon #17
SKF 99289 Speedi Sleeve, Inch, 2.953in Shaft Diameter, 0.594in Width
Asin: B00460KT6U | Model: 99289 | PartNumber: 99289 | Ean: 0085311042192 | UPC: 085311042192
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 3.94 x 9.84 x 0.91 inches
See On Amazon #18
SKF 99182 Speedi Sleeve and Tool Kit, Inch, 1.693in Shaft Diameter, 0.5in Width
Asin: B000EPOHVY | Model: 99182 | PartNumber: 99182 | Ean: 0085311902656 | UPC: 085311902656
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 inches
Warranty: One Year Warranty
See On Amazon #19
SKF 99819 Speedi Sleeve, Inch, 1.375in Shaft Diameter, 0.500in Width
Asin: B00460P7SA | Model: 99819 | PartNumber: 99819 | Ean: 0085311185677 | UPC: 085311185677
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
See On Amazon
Looking For Something Else?
Search