Peachtree Woodworking Supply Thin Rip Jig Table Saw Jig for Making Repetitive Narrow Strip Cuts on Table Saws with 3/4" x 3/8" Miter Slots Also Works with Many Router Tables and Band Saws
Asin: B0048J720U | Model: 3096 | PartNumber: 3096 | Ean: 0814310011034 | UPC: 814310011034
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Making Your Thin Rip Cuts In This Fashion Allows You To Cut Wider Boards Down Without Getting Your Fingers In Harms Way By Keep Them Away From The Blade Or Cutter.The Thin Rip Works Much Like A Feather Except That It Doesn’T Exert Spring Like Pressure Against The Board. This Means It Can Be Used To Make Accurate, Repetitive Cuts Since It’S Essentially Just Holding Its Spot Once It Is Secured..
The Jig Can Be Used On Other Workshop Machinery Like Router Tables With Fences And Band Saws For Re-Saw Applications. In Certain Cases, When Working With Larger Or Longer Stock On Table Saws Or Router Tables, We Recommend Using Two Thin Rip Jigs Behind The Blade Or Cutter For Extra Stability When Feeding Your Stock Through..
The Thin Rip Jig Has A Roller Guide Bearing On The Tip To Make Feeding Your Stock Through An Easy And Smooth Moving Process. The Free Rotating Bearing Is Made From High Quality Materials For Extended Workshop Use. The Jig Fits Directly Into Most Any Standard 3/8” X 3/4” Miter Slot. The Body Is Made From A Solid Piece Of Aluminum And Is Adjustable Inward And Outward From Your Fence Depending On The Width Of Your Stock..
The Thin Rip Jig Acts Kind Of Like A Third Hand Behind The Blade Or Cutter. With The Saw Unplugged Simply Measure From The Outside Of Of The Blade Toward The Tip Of The (Guide Roller) Thin Rip Jig For The Width Cut You Want To Make. Once Set, Secure The Thin Rip Jig Simply By Rotating The Large, Easy To Grip Star Shaped Knob. After Your First Cut, Reset Your Stock Behind The Blade And Slide The Fence Over So Your Stock Piece Is Touching The Guide Roller On The Thin Rip Jig. Lock The Fence..
Features
- Making repetitive cuts on your table saw is a pretty straight forward process. Set your fence and feed each stock piece through the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate.
- The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence.
- Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it s essentially just holding its spot once it is secured.
- The Thin Rip Jig has a roller guide bearing on the tip to make feeding your stock through an easy and smooth moving process. The free rotating bearing is made from high quality materials for extended workshop use. The jig fits directly into most any standard 3/8 x 3/4 miter slot. The body is made from a solid piece of aluminum and is adjustable inward and outward from your fence depending on the width of your stock.
- The jig can be used on other workshop machinery like router tables with fences and band saws for re-saw applications. In certain cases, when working with larger or longer stock on table saws or router tables, we recommend using two thin rip jigs behind the blade or cutter for extra stability when feeding your stock through.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Dimensions: 3.00 x 4.00 x 3.00 Inches | Weight: 1.25 pounds
See On Amazon Similar To Peachtree Woodworking Supply Thin Rip
#1
GOINGMAKE Thin Rip Jig Table Saw Jig Guide for Making Repetitive Narrow Thin Strip Cuts Woodworking Tools Fast Thin Ripping Guide for Table Saw Band Saw Router Table Fits for 3/8" x 3/4" T Slot
Asin: B0CBKSZ1D1 | Model: GM8 | PartNumber: GM8
【Precise Thin Ripping】Goingmake Table Saw Thin Rip Jig Guide Is Precise And Adjustale. Including Mm And Inch Laser Engraving Scales. The Zero Clearance Design Is Easy For Set The Right Distance. Repeat With Each Strip The Same Size As The First For Precison Cutting. Set Up The Scale To The Saw Is Easy. First Take The Bearing Close To The Saw Blade And Adjust The Scale Indicator To The Nearest Mark, Then Set The Dimension Of Your Strips..
【Wide Application】Goingmake Thin Ripping Guide Is Compatible With Standard Band Saw, Table Saw And Routers. Extended Range Is From 2-5/8 Inch To 8 Inch..
【High Quality】Goingmake Rip Guide Is Made Of High Quality Metal For Durable, Long Lasting Use. You Can Cut The Thin Strips As Thin As 1/32"..
【Safe And Fast】Goingmake Table Saw Jig Thin Ripping Guide Provides Safe And Fast Thin Strips Cutting. The One Way Roller Bearing Ensures The Workpiece Moves Forwards And Does Not Kickback, Making Safe And Fast Repetitive Narrow Strip Cutting With Ease. You Can Keep The Same Thickness Thin Strips Cutting Consistent With This Table Saw Thin Rip Jig..
Features
- EASY TO USE GOINGMAKE thin rip jig is easy to use. Just slide the guide into T-track miter slot of your table saw and lock it in front of the saw blade. Fits for 3/8" x 3/4" T slot and U shape slot and 1/4" x 3/8" T slot. Thin rip table saw accessories makes thin strips cut consistent.
- SAFE AND FAST GOINGMAKE table saw jig thin ripping guide provides safe and fast thin strips cutting. The one way roller bearing ensures the workpiece moves forwards and does not kickback, making safe and fast repetitive narrow strip cutting with ease. You can keep the same thickness thin strips cutting consistent with this table saw thin rip jig.
- PRECISE THIN RIPPING GOINGMAKE table saw thin rip jig guide is precise and adjustale. Including mm and inch laser engraving scales. The zero clearance design is easy for set the right distance. Repeat with each strip the same size as the first for precison cutting. Set up the scale to the saw is easy. First take the bearing close to the saw blade and adjust the scale indicator to the nearest mark, then set the dimension of your strips.
- HIGH QUALITY GOINGMAKE rip guide is made of high quality metal for durable, long lasting use. You can cut the thin strips as thin as 1/32.
- WIDE APPLICATION GOINGMAKE thin ripping guide is compatible with standard band saw, table saw and routers. Extended range is from 2-5/8 inch to 8 inch.
- See more on Amazon...
Brand: goingmake | Manufacturer: GOINGMAKE
See On Amazon #2
Peachtree Woodworking Supply Safety Woodworking Push Block and Stick Package 5 Piece Set In Orange Color, Ideal for Woodworkers and Use On Router Tables, Jointers and Band Saws
Asin: B07HKJSDP3 | Model: 1201 | PartNumber: 1201 | Ean: 0810948015444 | UPC: 810948015444
The General Idea Behind These Safety Devices Is To Help You Guide And Control Your Stock When Feeding Through A Table Saw, Band Saw, Jointer Or A Router Table. The Push Blocks Are Generally Used On Jointers And Some Router Applications, While The Push Sticks Are Primarily Used On Table Saw Projects. All Five Devices Help Prevent Kickback And Protect Your Fingers And Hands During Your Cutting Process.
The 5 Piece Safety Kit Includes 2 Each Small Push Blocks (1 Angled Handle And 1 Offset Handle Small Push Block), 1 Each Long Or Large Push Block, 1 Each Standard Width Push Stick And 1 Narrow Width Safety-V Push Stick..
Soft, Receptive, Rubber Foam Pads Line The Bases Of The Two Small Push Blocks And The Large Push Block. The Rubber Soles Make Pushing And Controlling Your Stock Much Easier And Safer Then When Doing It By Hand. The Soles Are Also Washable With With Warm Water. Must Let The Rubber Soles Dry For 24 Hours Prior To Using Them Again..
Each Device In This Kit Is Intentionally Made In The Safety Orange Color For High Visibility When In Use. This Provides The User The Ability To See Exactly There Hands Are At During The Cutting Or Milling Process. Being Safety Orange Also Allows For You To Easily Find The Device When Its Not In Its Normal Location..
Features
- This five piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications.
- Each device in this kit is intentionally made in the SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly there hands are at during the cutting or milling process. Being SAFETY ORANGE also allows for you to easily find the device when its not in its normal location.
- The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. The push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects. All five devices help prevent kickback and protect your fingers and hands during your cutting process
- Soft, receptive, rubber foam pads line the bases of the two small push blocks and the large push block. The rubber soles make pushing and controlling your stock much easier and safer then when doing it by hand. The soles are also washable with with warm water. Must let the rubber soles dry for 24 hours prior to using them again.
- The 5 piece safety kit includes 2 each small push blocks (1 angled handle and 1 offset handle small push block), 1 each long or large push block, 1 each standard width push stick and 1 narrow width safety-v push stick.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc
Weight: 2.05 pounds
See On Amazon #3
Sili-Brush - Silicone Glue Brush (1" Tip) Glue Dries and Peels Off. Ideal for Wodworking, Arts, Crafts, Around The Home and Hobbyists. Tips Made from Silicone Rubber.
Asin: B009OCEBD2 | Model: 1203 | PartNumber: 1203 | Ean: 7131405093045, 0814310014820 | UPC: 814310014820
Once You Finish Applying Glue, Simply Rinse The Brush Head Off With Warm Soap And Water And You Are Ready To Re-Use The Sili Brush Again After It Dries. Another Way To Clean The Sili Brush Is To Let The Glue Dry Over Night On The Brush Tip And Then Peel The Glue Right Off Without Damaging The Brush. It’S Perfect For When We Are In A Rush Or Simply Just Forget To Clean The Brush. No More Throwing Away Brushes And No More Buying Huge Multipacks..
This Revolutionary Brush Makes Glue Up Project Fun And Enjoyable Without The Mess. Use The Sili Brush Over And Over Again Without Having To Purchase New Brushes. The Sili Brush Tip Is Made From Silicone Rubber For Easy Clean Up. The Tip Is Also Angled Just Right For Optimal Glue Application Regardless Of The Project..
The Handle Features A Comfortable Grip Shape For Extended Periods Of Use And It Also Features A Flat Paddle End With A Built In Rest. The Paddle Is Perfect For Applying Small Amounts Of Glue To Smaller Areas Like Wood Dovetail Or Box Joints. The Rest On The Paddle End Allows The Brush To Be Set Down Without Touching Your Table Top Surface..
Introducing The The Sili Brush! This Silicone Glue Brush Allows You To Apply Yellow Wood Or White School Glue Quickly And Easily With The Sili Brush Non-Stick Glue Brush. The Sili Brush Is Designed To Be Used Over And Over Again Without Having To Purchase Extra Brushes Like You Would With Typical Tin Acid Or Flux Applicator Brushes. The Silicone Bristles Make Applying Glue And Cleanup Of The Brush A Breeze..
Features
- We ve all used those pesky and irritating horse hair acid glue brushes to apply white school glue or yellow wood glue only to find out the bristles don t hold very well and the glue coverage is minimal. Not only that, we tend to keep buying more and more and more of these brushes just to use them once and throw them away.
- Introducing the the Sili Brush! This silicone glue brush allows you to apply yellow wood or white school glue quickly and easily with the SILI Brush non-stick glue brush. The SILI Brush is designed to be used over and over again without having to purchase extra brushes like you would with typical tin acid or flux applicator brushes. The silicone bristles make applying glue and cleanup of the brush a breeze.
- Once you finish applying glue, simply rinse the brush head off with warm soap and water and you are ready to re-use the SILI Brush again after it dries. Another way to clean the Sili brush is to let the glue dry over night on the brush tip and then peel the glue right off without damaging the brush. It s perfect for when we are in a rush or simply just forget to clean the brush. No more throwing away brushes and no more buying huge multipacks.
- The handle features a comfortable grip shape for extended periods of use and it also features a flat paddle end with a built in rest. The paddle is perfect for applying small amounts of glue to smaller areas like wood dovetail or box joints. The rest on the paddle end allows the brush to be set down without touching your table top surface.
- This revolutionary brush makes glue up project fun and enjoyable without the mess. Use the Sili brush over and over again without having to purchase new brushes. The Sili brush tip is made from silicone rubber for easy clean up. The tip is also angled just right for optimal glue application regardless of the project.
- See more on Amazon...
Brand: Sili | Manufacturer: Fulton Tools
Weight: 0.01 Pounds
See On Amazon #4
DCT Woodworking Thin Rip Table Saw Jig Guide Tool for Router or Band Saw Cutting Wood/Ripping Chair Slates, Cabinet
Asin: B078PSYMB8 | Model: DCT-1339 | PartNumber: DCT-1339 | Ean: 0688295881339 | UPC: 688295881339
Safety First: Protects Your Hands And Fingers By Preventing Unnecessary Hand Proximity To The Sharp Blade; Reduces Dangerous Kickback By Keeping The Stock Completely On The Track And Preventing It From Getting Trapped Between The Fence And The Blade; Allows You To Work On The Free Side Of The Blade Thus Avoiding Unnecessary Risk And Stock Binding.
Various Applications: Rip Thin Slates For Chair Backs, Frames For Cabinets, Use With Band Saws And Routers, Or Even Use As A Crosscut Stop For Making Multiple Cutoffs On The Right Side Of A Saw Blade; Setup And Use Instructions Are Included For Your Convenience.
Secure Grip: Easy-To-Grip Knob On The Top Turns The Locking Miter Bar Piece And Holds Its Position Firmly To Secure Guide Position; Dual-Locking Feature Ensures The Guide Point Locks Jig In An Optimal Placement In A Standard 3/4-Inch X 3/8-Inch Miter Slot For A Specific Job; Roller On The End Acts As A Stop For The Material And Allows The Wood To Flow Past The Jig Without Resistance.
Even Cuts: Measurement Markings On Jig Are Easy To Read So You Can Make Accurate Cuts; Ball-Bearing Roller Keeps Stock Even While Fed Through The Blade Creating A Smooth Flow And Applying Consistent Pressure.
Features
- EFFORTLESSLY CUT THIN RIPS: The DCT Woodworking Thin Rip Table Saw Jig Guide Tool for Router or Band Saw Cutting Wood / Ripping Chair Slates, Cabinet allows you to cut reproducible thin rip cuts on the alternate side of a saw blade for safety, accuracy, and cut repeatability; This jig maximizes worker safety, streamlines your workflow, and produces successful outcomes
- EVEN CUTS: Measurement markings on jig are easy to read so you can make accurate cuts; Ball-bearing roller keeps stock even while fed through the blade creating a smooth flow and applying consistent pressure
- SAFETY FIRST: Protects your hands and fingers by preventing unnecessary hand proximity to the sharp blade; Reduces dangerous kickback by keeping the stock completely on the track and preventing it from getting trapped between the fence and the blade; Allows you to work on the free side of the blade thus avoiding unnecessary risk and stock binding
- SECURE GRIP: Easy-to-grip knob on the top turns the locking miter bar piece and holds its position firmly to secure guide position; Dual-locking feature ensures the guide point locks jig in an optimal placement in a standard 3/4-inch x 3/8-inch miter slot for a specific job; Roller on the end acts as a stop for the material and allows the wood to flow past the jig without resistance
- VARIOUS APPLICATIONS: Rip thin slates for chair backs, frames for cabinets, use with band saws and routers, or even use as a crosscut stop for making multiple cutoffs on the right side of a saw blade; Setup and use instructions are included for your convenience
- See more on Amazon...
Brand: Deadwood Crafted Tools | Manufacturer: Deadwood Crafted Tools
Dimensions: 2.75 x 8.60 x 5.10 Inches | Weight: 1.50 Pounds
Warranty: This product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.
See On Amazon #5
Fulton Taper Cutting Jig For Creating Tapered Angles Up to 15 Degrees on Your Table Saw 24 Inch Long Aluminum Rails with Scale and Stop
Asin: B001N1FYSI | Model: 1264 | PartNumber: 1264 | Ean: 0810948010012, 0735090027698 | UPC: 810948010012, 735090027698
Our Taper Jig Will Most Certainly Enhance Your Woodworking Abilities And Your Woodworking Projects. This Easy To Use Jig Is Fully Adjustable For Right Or Left Hand Use. As Well As Its Ability To Work On Either The Left Or Right Side Of Your Table Saw Fence..
Constructed Of Durable Aluminum The Fulton Taper Cutting Jig Comes With An Easy Grip Handle, Adjustable 24 Inch Rails With Fixed Stop, Easy-To-Read Graduated Scale That Measures 0 To 15 Degrees Of Taper (Or 3 Inches Per Foot) And Full Instruction Sheet..
Two Ways To Set The Jig. First Use The Scale That Has Markings Up To 15 Degrees Of Taper. Second Mark The Starting Cut At One End And Then Mark The Exit Cut At The Other End Of Your Piece Of Stock. Then Simply Adjust The Taper Jig To Match Those Two Marks..
The Fulton Taper Cutting Jig Has Been Designed To Make Long Rip Cuts At Angles From 1 Deg To 15 Degrees Using Your Table Saw. Perfect For Building Woodworking Projects Like Table Legs, Chair Legs, Magazine Racks And More Where Slight Tapers Are Common..
Features
- Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
- The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
- Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
- Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
- Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton
Dimensions: 1.50 x 24.40 x 3.00 Inches | Weight: 1.79 pounds
See On Amazon #6
DDWT Extended Thin Rip Jig Table Saw Jig Guide for Repeat Narrow Strip Cuts Works with Saw Router Table Band Saw - Extended Version
Asin: B0BM3KFZGX | Model: GD704B | PartNumber: GD704B | Ean: 0610825041654 | UPC: 610825041654
Sliding Tenon Design,Adjustable Inward And Outward,Locks Down Solid Without Swaying From Side To Side,This Would Help Avoid The Rips Drift,Specifically Designed For Precision Cutting.
Equipped With Sliders And T-Slot Bolts, Fit 3/4 X 3/8 Inch Standard Miter Slots And 30Mm T-Slot Track, Can Work With Most Standard Table Saw, Router Table And Band Saw.
The Thin Rip Jig Has 2 Guide Bearing On The Tip Play The Role Of Driving The Stock Forward,To Make Feeding Your Stock Through An Easy And Smooth Moving Process.
The Thin Rip Guide Is Machined From A Solid Piece Of Aluminum Alloy,Anodized Surface,Metal Rigid Structure,Strong And Stable,Long Service Life.
Features
- Upgrade lengthen size meets different machine needs,except Dewalt saw
- The thin rip guide is machined from a solid piece of aluminum alloy,anodized surface,metal rigid structure,strong and stable,long service life
- Sliding tenon design,adjustable inward and outward,locks down solid without swaying from side to side,this would help avoid the rips drift,specifically designed for precision cutting
- The thin rip jig has 2 guide bearing on the tip play the role of driving the stock forward,to make feeding your stock through an easy and smooth moving process
- Equipped with sliders and T-slot bolts, fit 3/4 x 3/8 inch standard miter slots and 30mm T-Slot Track, can work with most standard table saw, router table and band saw
- See more on Amazon...
Brand: DDWT | Manufacturer: DDWT
Weight: 0.95 pounds
See On Amazon #7
4" x 10' (4 inch diameter by 10 feet long) Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!
Asin: B0013EOTRW | Model: 375 | PartNumber: 375 | Ean: 0810948014041, 0798167706773 | UPC: 810948014041, 798167706773
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
While Pvc Hose Can Be Used On Other Machinery Or Devices It Has Been Designed For Dust Collection Purposes. The Hose Temperature Range Is -20° F To 165° F Which Is Ideal For Indoor Use Like In A Woodworking Or Workshop Environment. The Clear Hose Wraps Around A Black Carbon Steel Wire Helix That Reinforces The Hose To Keep It From Kinking And Is Capable Of An Electrostatic Discharge When Properly Grounded At Both Ends Of The Hose..
This Pvc Hose Is Clear Which Allows You To See What’S Going On Inside The Hose While The Dust And Debris Are Flowing Through It. Not Only Can You See The Dust And Debris, You Can Also See If Any Build Up Or Blockage Has Occurred. Being Able To See This Makes Fixing Any Suction Issues With The Hose Much Easier Than Typical Opaque Hoses..
Ypically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- ypically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
- See more on Amazon...
Brand: Peachtree Woodworking | Manufacturer: Peachtree Woodworking Supply
Dimensions: 5.00 x 16.00 x 16.00 Inches
See On Amazon #8
Peachtree Woodworking Supply ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (50 inch Clamp)
Asin: B07ZKS7Y3W | Ean: 0817918022433 | UPC: 817918022433
Each Clamp Rail Is Manufactured With A Low Profile To Make Guiding Your Power Tool Along The Edge Much Easier. The Low Profile Has Also Been Designed With Guide Accessories In Mind. The Clamp Rails Accept Many Different Accessories (Sold Separately) Or Can Create Your Very Own Jigs And Fixtures To Use With The Progrip Straight Edge Guides. Each Progrip Straight Edge Guide Has The Exact Same Profile Regardless Of Length..
The Lock Lever On Each Clamp Can Be Secured Into One Of Three Positions, Each Position Provides Varying Amounts Of Pressure. Depending On Your Project Or Application, You May Need To Apply More Pressure By Securing The Lock Lever To The Appropriate Position. Once Secured, The Progrip Straight Edge Guide Clamp Is Designed To Have Zero Side To Side Play With Minimal Deflection To Provide You With The Ideal Straight Edge To Make Clean, Smooth Cuts Every Time!.
How Does It Work? Each Progrip Straight Edge Guide Clamp Has One Adjustable Jaw And One Fixed Jaw. The Fixed Jaw Typically Will Go Against The Edge Of The Board Closest To You. Once You Place The Clamp On Your Board With The Fixed Jaw Over The End, The Adjustable End Gets Drawn In Against The Opposite Side Of The Board. Once Set And Aligned, You Secure The Clamp By Simply Locking It Down With The 3 Position Lock Lever..
Cut Straight, True Lines With Circular Saws, Routers, Trim Routers, Jig Saws And Many Other Power Tools You Probably Own. These Clamps Are Ideal For Cutting Large Sheets Of Plywood In Half (With A 50” Straight Edge Guide). Each Clamp Is Identified By The Maximum Clamping Distance Between Jaws. Another Great Application For These Clamps Is Cutting Dado Slots For Bookshelves. The Alignment And Cutting Process For Dados Is So Much Easier Than Ever Before With The Progrip Straight Edge Guides..
Features
- No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
- Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50 straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
- Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
- How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
- The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon #9
Peachtree Woodworking Supply Phenolic Zero Clearance Insert for Delta Uni-Saw Contractor | Large Grizzly and Other Table Saws with a 13-3/8" x 3-3/4" x 1/2" Throat Plate Opening
Asin: B01M24FNRJ | Model: 4133 | PartNumber: 4133 | Ean: 0814310018200 | UPC: 814310018200
Another Great Reason To Use A Zero Clearance Insert Is To Help Reduce That Pesky And Irritating Tear Out You Always Tend To Get On Your Cuts. Without A Zero Clearance, The Wood Has No Support By The Blade To Prevent The Wood From Tearing Out. This Is Especially True When Cutting Plywood. Zero Clearance Inserts Help Prevent Tear Out By Essentially Enveloping The Blade On All Sides Which Doesn’T Allow The Wood To Tear Out Since There Is Not Gap Between The Blade And Insert..
This Zero Clearance Insert Is Made From A High Density Phenolic Material That Was Chosen For Its Ability To Stand Up To Everyday Workshop Use. The Insert Features Two Snug Fit Sand-Able Side Tabs That Allow You To Remove A Little Material At A Time For A Perfect Fit If Necessary. The Insert Also Features A Top And A Side Snug Fit Screw For A Tight Fit To You Saw With No Movement!.
Zero Clearance Inserts Can Be Used In Conjunction With Most Any Table Saw Blade Including Thin Kerf, Standard Kerf And Carbide Tipped Blades. You Can Also Use Zero Clearance Inserts With Dado Blade Sets. The Reason You Would Use Zero Clearance Inserts With Dado Blades Is To Reduce The Amount Of Tear Out The Dado Blade Set Produces. We Recommend That You Use Separate Zero Clearance Inserts For Dado Blades Since The Gap For Dados Will Be Much Wider Than Standard Width Table Saw Blades..
If You Own A Table Saw, Then You Probably Have Had Smaller Pieces Of Wood Get Caught Between The Saw Blade And The Factory Supplied Throat Plate Opening. This Can Cause That Piece Of Wood To Jam Up Against The Blade And Go Flying Across The Room Or Worse Yet, Right Back At You. Zero Clearances Help Minimize This Situation From Happening Since There Is No Gap Between The Blade And The Zero Clearance Opening. The Opening Is More Like A Custom Slot Cut To The Exact Width Of Your Table Saw Blade..
Features
- MEASURE YOUR FACTORY INSERT AND COMPARE SIZE BEFORE YOU ORDER. Zero Clearance inserts are table saw specific. Since every table saw brand and manufacturer is different, we recommend that you measure the exact length, width and thickness of your table saw insert or opening and compare it to the size we list. Also be aware of the shape of your current insert of whether its round, square ends or if there are any indents or protruding notches. Insert colors may vary from images shown.
- If you own a table saw, then you probably have had smaller pieces of wood get caught between the saw blade and the factory supplied throat plate opening. This can cause that piece of wood to jam up against the blade and go flying across the room or worse yet, right back at you. Zero clearances help minimize this situation from happening since there is no gap between the blade and the zero clearance opening. The opening is more like a custom slot cut to the exact width of your table saw blade.
- Another great reason to use a zero clearance insert is to help reduce that pesky and irritating tear out you always tend to get on your cuts. Without a zero clearance, the wood has no support by the blade to prevent the wood from tearing out. This is especially true when cutting plywood. Zero clearance inserts help prevent tear out by essentially enveloping the blade on all sides which doesn t allow the wood to tear out since there is not gap between the blade and insert.
- Zero Clearance inserts can be used in conjunction with most any table saw blade including thin kerf, standard kerf and carbide tipped blades. You can also use zero clearance inserts with dado blade sets. The reason you would use zero clearance inserts with dado blades is to reduce the amount of tear out the dado blade set produces. We recommend that you use separate zero clearance inserts for dado blades since the gap for dados will be much wider than standard width table saw blades.
- This zero clearance insert is made from a high density phenolic material that was chosen for its ability to stand up to everyday workshop use. The insert features two Snug Fit sand-able side tabs that allow you to remove a little material at a time for a perfect fit if necessary. The insert also features a top and a side Snug Fit Screw for a tight fit to you saw with no movement!
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Fulton
Dimensions: 0.50 x 13.74 x 3.75 Inches | Weight: 1.23 pounds
See On Amazon #10
MICROJIG GRR-RIPPER GRP-11G 1/8" Leg Table Saw Accessory, Green
Asin: B003E65XXQ | Model: GRP-11G | PartNumber: GRP-11G
Ean: 5915903681278, 0815267010071, 0785533544299, 0645220388714, 0756655164320, 7241870919877, 7131405540396
UPC: 645220388714, 815267010071, 756655164320, 785533544299
Powerful Green Grr-Rip Holds And Feeds Wood Through The Cut.
Perfect For Edge Bending, Veneer, Inlays, Decorative Design, Model Building And More..
Easily Cleans With Denatured Or Rubbing Alcohol.
Attaches Directly To The Main Body Of The Grr-Ripper Or Directly To The Side Leg Of The Grr-Ripper.
Features
- GRR-RIPPER Accessory for ripping 1/8" thin rips consistently and cleanly on a table saw
- Attaches directly to the main body of the GRR-RIPPER or directly to the Side Leg of the GRR-RIPPER
- Powerful Green GRR-RIP holds and feeds wood through the cut
- Easily cleans with denatured or rubbing alcohol
- Perfect for edge bending, veneer, inlays, decorative design, model building and more.
- See more on Amazon...
Brand: MICRO JIG | Manufacturer: MICROJIG, Inc.
Dimensions: 0.90 x 10.85 x 4.50 inches | Weight: 0.13 pounds
Warranty: Extended 3-Year Manufacturer's Warranty from Authorized Dealers Only
See On Amazon #11
CARTER MAGFENCE II Universal Magnetic Fence
Asin: B007ENWIQK | Ean: 0688937511440 | UPC: 688937511440
Two Powerful, Switchable Magnets For Quick, Precise Adjustments.
Compatible With All Magfence Ii Accessories.
Easily Removed To Use With Multiple Equipment.
16" Long, 3-1/2" Tall L-Shaped Aluminum Extrusion With Multiple T-Slots.
Features
- Attaches magnetically for universal fit on most ferrous metal tables
- 16 long, 3-1/2 tall L-shaped aluminum extrusion with multiple T-slots
- Two powerful, switchable magnets for quick, precise adjustments
- Easily removed to use with multiple equipment
- Compatible with all MAGFENCE II accessories
- See more on Amazon...
Brand: Carter Fuel Systems | Manufacturer: Carter Products
Dimensions: 3.50 x 16.30 x 3.50 Inches
See On Amazon #12
Gator Grip Safety Push Block 2 Pack with Blue Rubber Podular Pattern for Superior Gripping Power Ideal for Use On Router Tables, Jointers, Shapers and Band Saws
Asin: B08914CPN8 | Model: 11569 | PartNumber: 11569 | Ean: 0817918022594 | UPC: 817918022594
While Standard Push Blocks Work, These Push Blocks Take The Next Step In Gripping Power To Give You Superior Control Over You Typical Push Block. With Its Unique Offset Podular Patterned, Non-Slip Rubber Surface The Gator Grip Push Blocks Help Your Control Your Wood, Composite, Metal And Resin Materials. Perfect For Use On A Router Table, Jointer, Shaper, Band Saw Or Where Ever You Need To Guide Your Stock Through A Cutter Or Blade..
With The 6-3/8” Long By 3-1/4” Wide Base, You’Ll Have Plenty Of Gripping Surface To Work With Large And Smaller Stock Pieces. The Comfort Grip, Molded Handle Is Perfectly Angled To Make Applying Downward And Inward Pressure Easy And With Much Less Strain Than You May Have To Exert With Straight Handled Push Blocks..
Not Only Do The Gator Grip Push Blocks Grip Better But They Are Specifically Designed To Help Keep Your Fingers Away From Sharp, Fast Moving Cutters And Blades With Its Durable Plastic Body And Thick Raised Handle. This In Combination With The Gator Grip Podular Pads Give You Unmatched Control Of Your Workpiece..
Gator Grip Push Blocks Have A Uniquely Designed Podular Patterned Rubber Pad That Offers Superior Gripping Power Over Your Standard Foam Base Push Block. The Podular Pattern Along With The Firm But Receptive Rubber Material Grips Your Stock Better Than Ever Before And Makes Feeding Your Stock Through Multiple Workshop Machine Cutter Types Much Easier. The Unique Gator Grip Podular Design Also Helps Keep Dust And Debris In The Surface Voids To Help Maintain Excellent Traction..
Features
- Most woodworkers already have multiple push blocks in their toolbox. The thing is, most push blocks use a foam base to try and grip the wood or material to help feed it through jointers, router table cutters or band saw blades. The firm, slick foam tends to slip after a use or two and especially on harder or more dense materials. That material typically dry rots over time and renders the blocks useless.
- Gator Grip push blocks have a uniquely designed podular patterned rubber pad that offers superior gripping power over your standard foam base push block. The podular pattern along with the firm but receptive rubber material grips your stock better than ever before and makes feeding your stock through multiple workshop machine cutter types much easier. The unique Gator Grip podular design also helps keep dust and debris in the surface voids to help maintain excellent traction.
- While standard push blocks work, these push blocks take the next step in gripping power to give you superior control over you typical push block. With its unique offset podular patterned, non-slip rubber surface the Gator Grip push blocks help your control your wood, composite, metal and resin materials. Perfect for use on a router table, jointer, shaper, band saw or where ever you need to guide your stock through a cutter or blade.
- Not only do the Gator Grip push blocks grip better but they are specifically designed to help keep your fingers away from sharp, fast moving cutters and blades with its durable plastic body and thick raised handle. This in combination with the Gator Grip podular pads give you unmatched control of your workpiece.
- With the 6-3/8 long by 3-1/4 wide base, you ll have plenty of gripping surface to work with large and smaller stock pieces. The comfort grip, molded handle is perfectly angled to make applying downward and inward pressure easy and with much less strain than you may have to exert with straight handled push blocks.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
Weight: 0.00 pounds
See On Amazon #13
Thin Rip Jig Table Saw Accessory Safe, Repetitive Narrow Strip Cuts for Woodworking - Fits 3/8" x 3/4" Miter Slots, Ideal for Router Tables, Band Saws Durable Aluminum
Asin: B0CRNLZJW2 | Model: thin rip tablesaw jig | PartNumber: thin rip tablesaw jig
Easy To Use And Adjust: The Thin Rip Jig Features Clear Measurement Markings And An Easy-To-Grip Knob For Secure Locking. Its Zero-Clearance Capability And Laser-Engraved Scales In Mm And Inches Enable Quick Setup And Adjustment For Accurate, Repetitive Cuts..
Versatile Woodworking Tool: Whether You're Ripping Chair Slats, Making Cabinet Frames, Or Need A Crosscut Stop For Multiple Cutoffs, Our Jig Is A Must-Have Accessory. It's Compatible With A Wide Range Of Saws And Routers, Expanding Your Workshop's Capabilities..
Durable Construction: Crafted From Solid Aluminum With A High-Quality Free-Rotating Bearing, This Rip Guide Is Built For Longevity. It's The Reliable Choice For Thin Strips As Narrow As 1/32", Enhancing Your Woodworking Projects With Its Robust Design..
Enhanced Safety Features: Keep Your Hands At A Safe Distance And Reduce Kickback Risks With Our Table Saw Jig. The One-Way Roller Bearing Design Allows For Smooth Forward Motion Without Backward Kick, Providing A Secure And Precise Cutting Experience Every Time..
Features
- Effortless Precision Cuts: Our Thin Rip Jig Tool simplifies making consistent, narrow strip cuts on table saws, routers, and band saws. Engineered for safety and accuracy, it fits standard 3/8" x 3/4" miter slots, ensuring smooth operation and perfect repeatability.
- Enhanced Safety Features: Keep your hands at a safe distance and reduce kickback risks with our table saw jig. The one-way roller bearing design allows for smooth forward motion without backward kick, providing a secure and precise cutting experience every time.
- Easy to Use and Adjust: The Thin Rip Jig features clear measurement markings and an easy-to-grip knob for secure locking. Its zero-clearance capability and laser-engraved scales in mm and inches enable quick setup and adjustment for accurate, repetitive cuts.
- Durable Construction: Crafted from solid aluminum with a high-quality free-rotating bearing, this rip guide is built for longevity. It's the reliable choice for thin strips as narrow as 1/32, enhancing your woodworking projects with its robust design.
- Versatile Woodworking Tool: Whether you're ripping chair slats, making cabinet frames, or need a crosscut stop for multiple cutoffs, our jig is a must-have accessory. It's compatible with a wide range of saws and routers, expanding your workshop's capabilities.
- See more on Amazon...
Brand: ViewReal | Manufacturer: ViewReal
See On Amazon #14
Peachtree Woodworking Supply Uni Style Table Saw Fence with Sacrificial UHMW Sub Fence Face | Designed as an Upgrade For Older Delta Uni Saws Proudly MADE IN USA 43" Length
Asin: B08P51K7LX | Model: 1113 | PartNumber: 1113 | Ean: 0810948016830 | UPC: 810948016830
The Front Of The Fence Is Recessed To Accept The 1/2” Thick Uhmw Strip. This Also Means That You Can Cut Any 1/2” Thick Material To Length And Use It As A Sacrificial Fence Face. We Recommend Using Wood Or Uhmw To Make Your Fence Face As Both Materials Are Easy To Cut And Machine As Needed To Fit And Neither Material Won’T Hurt Your Table Saw Blade Should It Come In Contact..
Made From A Solid Piece Of Extruded Aluminum And Made Proudly In The Usa, The Uni Style Table Saw Fence Is Built To Last And Perform In Your Workshop. Each Fence Is Milled, Cut And Extruded To Exacting Specifications.The Original Delta Uni Saw Table Saw Fence And Base Is Not Included As This Is An Upgrade To The Delta Uni Fence Section Only. The Uni Style Table Saw Fence Includes 1 Each Uni Style Table Saw Fence Section With Uhmw Sub Fence Face..
The Fence Has Several Mini Tracks That Run The Length Of The Fence. Each Of These Tracks Accept 1/4” X 20 Hex Head Bolts Which Are The Ideal Bolt Size For Most Woodworking Jigs Or Fixtures. Many Store Bought Jigs Or Fixtures Will Work With The Fence As Long As The Bolt Is The Correct Size. Being Able To Add Feather Boards, Stop Blocks And More To Your Cutting Process Not Only Make It And Easier Process But A Safer Process As Well..
The Old Fence On The Uni Saw Worked Just Fine For Standard Cuts, But What If You Wanted To Make A Rabbet Cut Or Add A Feather Board Or A Hold Down To The Cutting Process? The Answer To Both Of Those Questions Is You Can’T With The Old Style Fence. The Uni Style Table Saw Fence Allows You To Add Endless Amounts Of Jigs And Fixtures And With The Included Uhmw Sacrificial Fence Face You Can Cut Into It In Order Make Clean Rabbet Cuts On Your Table Saw!.
Features
- The Uni Style Table Saw Fence is a heavy duty, single piece of aluminum that has been extruded for superior strength. The fence is designed as an up-grade fence for the factory made Delta Uni-fence Table Saw System. The Delta Uni-fence system has long been regarded as on of the best over the years but the fence itself needed some improvements. That s where the Uni Style Table Saw Fence steps in.
- The old fence on the Uni Saw worked just fine for standard cuts, but what if you wanted to make a rabbet cut or add a feather board or a hold down to the cutting process? The answer to both of those questions is you can t with the old style fence. The Uni Style Table Saw Fence allows you to add endless amounts of jigs and fixtures and with the included UHMW sacrificial fence face you can cut into it in order make clean rabbet cuts on your table saw!
- The front of the fence is recessed to accept the 1/2 thick UHMW strip. This also means that you can cut any 1/2 thick material to length and use it as a sacrificial fence face. We recommend using wood or UHMW to make your fence face as both materials are easy to cut and machine as needed to fit and neither material won t hurt your table saw blade should it come in contact.
- The fence has several mini tracks that run the length of the fence. Each of these tracks accept 1/4 x 20 hex head bolts which are the ideal bolt size for most woodworking jigs or fixtures. Many store bought jigs or fixtures will work with the fence as long as the bolt is the correct size. Being able to add feather boards, stop blocks and more to your cutting process not only make it and easier process but a safer process as well.
- Made from a solid piece of extruded aluminum and made proudly in the USA, the Uni Style Table Saw Fence is built to last and perform in your workshop. Each fence is milled, cut and extruded to exacting specifications.The Original Delta Uni Saw Table Saw Fence and Base is NOT included as this is an upgrade to the Delta Uni Fence Section ONLY. The Uni Style Table Saw Fence includes 1 each Uni Style Table Saw Fence Section with UHMW sub fence face.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Dimensions: 3.00 x 43.00 x 2.00 Inches
See On Amazon #15
MICROJIG GRR-RIPPER SP-0125 Mj Splitter For 1/8" Kerf Saw Blades By Table Saw Safety Splitter System, Multi-Colored
Asin: B00BXL3TVM | Model: SP-0125 | PartNumber: SP-0125 | Ean: 0732233475354, 0815267010248, 0810948012924 | UPC: 815267010248, 732233475354, 810948012924
Mini-Featherboard Technology Keeps The Workpiece Against The Fence And Prevents Burning.
Voted Best New Tool By Popular Woodworking, Chris Schwartz.
Simple Instructions And Installation Drill Guide Included.
Installs Directly To Phenolic, Wood Or Plastic Zero Clearance Inserts (Throatplates).
Features
- The original aftermarket splitter for table saws for preventing kickback (for 1/8" kerf saw blades)
- Installs directly to Phenolic, wood or plastic Zero Clearance Inserts (Throatplates)
- Mini-featherboard technology keeps the workpiece against the fence and prevents burning
- Simple instructions and installation drill guide included
- Voted Best New Tool by Popular Woodworking, Chris Schwartz
- See more on Amazon...
Brand: MICRO JIG | Manufacturer: MICROJIG, Inc.
Dimensions: 4.00 x 4.00 x 0.50 Inches | Weight: 0.10 pounds
Warranty: Extended 3-Year Manufacturer's Warranty from Authorized Dealers Only
See On Amazon #16
HFM Thin Rip Table Saw Jig Guide Making Repetitive Narrow Strip Cuts, Fit for 3/4" x 3/8" Miter Slots, Compatible with Most Router Tables, Band Saw
Asin: B0BXDFQNQV | Model: TRJ1 | PartNumber: TRJ1
Good Compatibility - Suitable For 30, 45, 19, 20 Milling T-Track, 74 T-Track, 50/66 Combination T-Track; Compatible With 3/4" X 3/8" Standard Milling Slots; 30Mm T-Slot Milling Track, Compatible With Most Standard Band Saws, Table Saws And Routers On The Market..
Wide Range Of Applications - The Jig Can Be Used On Other Workshop Machinery Like Router Tables With Fences And Band Saws For Re-Saw Applications. Upgrade And Lengthen The Telescopic Range Up To 6.89 Inch/175Mm To Meet The Needs Of Different Machines.
👍After-Sales Carefree - If You Have Any Questions Or Need Product Manuals, Please Feel Free To Contact Us, We Will Reply And Solve For You Within 24 Hours..
Easy To Use - On The Tip Of The Thin Rip Jig, There Are Two Bearing Noses Driving The Stock Forward So That It Keeps Cutting Width Consistent As Well For More Stability When Feeding Wood. The Jig Can Be Used On Other Workshop Machinery Like Router Tables With Fences And Band Saws For Re-Saw Applications.
Professional Design - Clearly Readable Scale With Accurate Positioning Inches And Unique Sliding Mortise Design It Makes The Thin Rip Table Saw Jig More Stable Adjustable Inward And Outward And Locks Down Solid Without Swaying From Side To Side, This Would Help Avoid The Rips Drift, Specifically Designed For Precision Cutting.
Features
- High-quality materials - Aluminum alloy metal structure, anodized surface for strong, long service life.
- Professional design - Clearly readable scale With accurate positioning inches and unique sliding mortise design it makes the thin rip table saw jig more stable adjustable inward and outward and locks down solid without swaying from side to side, this would help avoid the rips drift, specifically designed for precision cutting
- Good compatibility - Suitable for 30, 45, 19, 20 milling T-track, 74 T-track, 50/66 combination T-track; compatible with 3/4 x 3/8 standard milling slots; 30mm T-slot milling track, compatible with most standard band saws, table saws and routers on the market.
- Easy to use - On the tip of the thin rip jig, there are two bearing noses driving the stock forward so that it keeps cutting width consistent as well for more stability when feeding wood. The jig can be used on other workshop machinery like router tables with fences and band saws for re-saw applications
- Wide range of applications - The jig can be used on other workshop machinery like router tables with fences and band saws for re-saw applications. Upgrade and lengthen the telescopic range up to 6.89 inch/175mm to meet the needs of different machines
- After-sales Carefree - If you have any questions or need product manuals, please feel free to contact us, we will reply and solve for you within 24 hours.
- See more on Amazon...
Brand: Heavy fog mountain | Manufacturer: Heavy fog mountain
See On Amazon #17
Peachtree Woodworking Supply Delta UHMW Zero Clearance Table Saw Insert Approx Dims 13-3/8in x 3-3/4in x 1/2in
Asin: B000H6FQZQ | Ean: 0810948010685 | UPC: 810948010685
Insert Comes With Leveling Screws And Rear Safety Pin.
Please Check Your Length,Width And Thickness Of Your Current Insert Before Ordering.
13 3/8" X 3 3/4" X 1/2" Thick- Made Of Uhmw.
Helps To Prevent Tear-Out And Closes The Large Factory Gap Between Blade And Insert..
Features
- The insert is blank so you can custom fit the blade slot for standard Kerf, Thin Kerf or Dado blades
- Helps to prevent tear-out and closes the large factory gap between blade and insert.
- Insert comes with leveling screws and rear safety pin
- 13 3/8 x 3 3/4 x 1/2 thick- Made of UHMW
- Please check your Length,Width and Thickness of your current insert before ordering
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc
See On Amazon #18
WoodRiver Thin Rip Table Saw Jig
Asin: B0C79QS43H | Ean: 0844788068476 | UPC: 844788068476
Material: Extruded Aluminum Body And Miter Slot Guide, Anodized For Wear Protection.
Woodriver Is Proudly Made By Woodcraft, America’S Leading Supplier Of High-Quality Woodworking Hand Tools, Power Tools, Domestic And Exotic Wood, Shop Supplies, Project Plans And Kits, Plus So Much More! Offering First-Rate Products For All Your Woodworking Needs And Designed To Help You Make Wood Work. Our Family Of Brands Include Woodcraft Tools And Supplies, Highpoint Professional-Grade Fasteners And Hardware, Pinnacle Precision-Engineered Tools And Woodcraft Magazine..
5/8" Diameter Sealed Bearing -.
Ratchet-Like Handle For Easy Hand Tightening.
Features
- Works with any table saw with a 3/4" miter slot to make repeatable thin strips
- Ratchet-like handle for easy hand tightening
- Material: Extruded aluminum body and miter slot guide, anodized for wear protection
- 5/8 Diameter sealed bearing -
- WoodRiver is proudly made by Woodcraft, America s leading supplier of high-quality woodworking hand tools, power tools, domestic and exotic wood, shop supplies, project plans and kits, plus so much more! Offering first-rate products for all your woodworking needs and designed to help you make wood work. Our family of brands include Woodcraft tools and supplies, Highpoint professional-grade fasteners and hardware, Pinnacle precision-engineered tools and Woodcraft Magazine.
- See more on Amazon...
Brand: WOODRIVER | Manufacturer: Woodcraft Supply
Dimensions: 3.00 x 9.00 x 7.15 inches | Weight: 1.50 pounds
See On Amazon #19
Twotrees Thin Rip Jig, Extended Table Saw Jig Guide, Table Saw Accessories for Making Repetitive Narrow Strip Cuts Fit for 3/4" X 3/8" Miter Slots, Compatible With Most Router Tables and Band Saw
Asin: B0CJ4XYMT6 | Model: XBGJ-E1 | PartNumber: XBGJ-E1
【High Quality Material】The Thin Rip Jig Is Crafted From Cnc-Machined Anodized Aluminum Alloy, Anodized Surface, Metal Rigid Structure, Strong And Stable, Hold The Workpiece Firmly And Eliminate Wood Chattering, Ensure Cutting Quality And Avoid Your Fingers Being Damaged..
【Quality Services】Our Company Specializes In Creating Various Convenient Tools For Woodworkers After Years Of In-Depth Research And Manufacturing.If You Have Any Questions About The Product Or Need A Product Manual, Please Feel Free To Contact Us, We Will Reply And Solve The Problem For You Within 12 Hours..
【Easy To Use】Slide The Guide Slide Or T-Slot Bolt Into The Table Saw's T-Track Miter Slot And Lock It A Few Inches In Front Of The Blade. Set The Desired Size On The Laser Engraving Scale, Lock Your Thin Rip Jig, Make Sure The Wood Is Just Touching The Guide Bearings, And Repeat For Narrow Cuts..
【High Precision Extended Version】Thin Rip Jig Guide Upgraded With Extended Telescopic Range To 2-5/8 In. To 8 In. The Scale Line Is Equipped With Imperial/ Metric Scale Marks,Sliding Tenon Design Can Be Adjustable Inward And Outward, Firmly Locked Without Shaking Left And Right, Avoiding Gap Drift, Specially Designed For Precision Cutting..
Features
- Perfect Compatibility The thin rip jig is compatible with a range of miter rails, including Model 30, Model 45, Model 19, Model 20 Miter T-Track, Model 74 T-Track and Model 50/66 Combination T-Track miter rails. It also fits standard 3/4-inch x 3/8-inch miter slots and 30mm T-slot miter rails, making it compatible with most standard bandsaw, table saw, router, and thin-cutting table saw jigs.
- High Precision Extended Version Thin rip jig guide upgraded with extended telescopic range to 2-5/8 in. to 8 in. the scale line is equipped with imperial/ metric scale marks,sliding tenon design can be adjustable inward and outward, firmly locked without shaking left and right, avoiding gap drift, specially designed for precision cutting.
- High Quality Material The thin rip jig is crafted from CNC-machined Anodized Aluminum alloy, anodized surface, metal rigid structure, strong and stable, hold the workpiece firmly and eliminate wood chattering, ensure cutting quality and avoid your fingers being damaged.
- Easy to Use Slide the guide slide or T-slot bolt into the table saw's T-track miter slot and lock it a few inches in front of the blade. Set the desired size on the laser engraving scale, lock your thin rip jig, make sure the wood is just touching the guide bearings, and repeat for narrow cuts.
- Quality Services Our company specializes in creating various convenient tools for woodworkers after years of in-depth research and manufacturing.If you have any questions about the product or need a product manual, please feel free to contact us, we will reply and solve the problem for you within 12 hours.
- See more on Amazon...
Brand: OUYANG | Manufacturer: OUYANG
Dimensions: 1.10 x 7.00 x 3.10 Inches
See On Amazon
Looking For Something Else?
Search