Neiko 10052A Spot Weld Drill Bits, High Speed Cobalt Steel with Titanium Coating | 8mm (5/16-Inch)
Asin: B005TY5EPI | Model: 10052A | PartNumber: 10052A | Ean: 0837013100522 | UPC: 837013100522
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.[Durable]: Heat Resistant Titanium Coating Withstands High-Performance Metal And Wood Drilling When Used In High Temperature Environments..
[Precise]: Nibbed Pilot Tip Design Increases Accuracy And Prevents Slipping When Held Down For Marking Purposes..
[Size]: Standard 8Mm Bit At 1-3/4" (45Mm) Length Is Commonly Used For Locating Spot Welds In Automobile Frames..
[Pro Grade]: Flat Ground Surface On Bottom Half Of Bit Provides Additional Strength And Chuck Hold On Any Welding Drill..
[Heavy Duty]: Special Grade High Speed Steel Cobalt Mix Is Designed For Long Service Life To Withstand Quick Speed Running Rate..
Features
- [APPLICATION]: Use this spot weld drill bit to separate spot welds and resistance spot welding panels without distorting the sheet metal.
- [HEAVY DUTY]: Special grade high speed steel cobalt mix is designed for long service life to withstand quick speed running rate.
- [DURABLE]: Heat resistant titanium coating withstands high-performance metal and wood drilling when used in high temperature environments.
- [PRO GRADE]: Flat ground surface on bottom half of bit provides additional strength and chuck hold on any welding drill.
- [PRECISE]: Nibbed pilot tip design increases accuracy and prevents slipping when held down for marking purposes.
- [SIZE]: Standard 8mm bit at 1-3/4 (45mm) length is commonly used for locating spot welds in automobile frames.
- See more on Amazon...
Brand: NEIKO | Manufacturer: Ridgerock Tools Inc.
Dimensions: 0.39 x 0.39 x 2.01 inches | Weight: 0.02 pounds
See On Amazon Similar To Neiko 10052A Spot Weld Drill
#1
14-Pack Spot Weld Cutter Sets Double Sided, 3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover for Power Drill Spot Welding
Asin: B087FS9PR8 | Ean: 0720355262303 | UPC: 720355262303
Easily Separate : There Is A Spring-Loaded Pin In The Center Of These Blades To Guide The Cutter To Grind Through The Spot-Welded Material,Drilling Out Spot-Welds In A Manner That Leaves A Very Clean Hole Without Distorting The Sheet Metal..
Spot Weld Cutter Tool：Easy To Replace The Blades When It Begins To Dull..
Fit For : Sharp Double-Sided Blades For High Efficiency. Suitable For Thin Stainless Steel Sheets, Iron Sheets, Aluminum Sheets, F.R.P Or Other Thin Metal Sheets..
Double Sided : Double Sided Rotary Cutter Blade Separates Spot-Welded Panels More Effectively Than A Panel Cutter.When 1 Side Gets Dull You Simply Have To Flip The Bit Around On Its Arbor Assembly..
Features
- Durable Material : The preferred material used was top-quality steel which has excellent thermal resistance.The cutting blade has a diameter of 3/8 inches, and the arbor is of standard 1/4 inch size.
- Double Sided : Double sided rotary cutter blade separates spot-welded panels more effectively than a panel cutter.when 1 side gets dull you simply have to flip the bit around on its arbor assembly.
- Easily Separate : There is a spring-loaded pin in the center of these blades to guide the cutter to grind through the spot-welded material,drilling out spot-welds in a manner that leaves a very clean hole without distorting the sheet metal.
- Fit For : Sharp double-sided blades for high efficiency. Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P or other thin metal sheets.
- Spot Weld Cutter Tool Easy to replace the blades when it begins to dull.
- See more on Amazon...
Brand: EONLION | Manufacturer: EONLION
Dimensions: 1.06 x 4.13 x 1.96 Inches
See On Amazon #2
Wolfride 3PCS Spot Weld Drill Bits Spot Weld Removal Tool 6.5MM 8MM 10MM
Asin: B0BK1C2PPN | Model: 80042GY0571 | PartNumber: 80042GY0571
Titanium Coating, To Enhance Wear And Corrosion Resistance..
Used On Pneumatic Spot Welding Removing Drill..
Used For Removing Sheet Metal Solder Joints..
45Mm Long, Size: 6.5Mm, 8Mm, 10Mm. (Note: Imperial Marks Are An Approximation.).
Features
- 3pcs spot weld drill bits, made of HSS Co.
- 45mm long, size: 6.5mm, 8mm, 10mm. (Note: Imperial marks are an approximation.)
- Titanium coating, to enhance wear and corrosion resistance.
- Used for removing sheet metal solder joints.
- Used on pneumatic spot welding removing drill.
- See more on Amazon...
Brand: Wolfride | Manufacturer: Wolfride
See On Amazon #3
Spot Weld Cutter Set Double Sided 14 Pcs,3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover Kit for Power Drill Spot Welding, by NAKAO
Asin: B08L7PLPN3 | Ean: 0788424550294 | UPC: 788424550294
◆【Easy Separation】 The Spot Welding Cutting Machine Drill Bit Can Easily Separate The Spot Welding Plate Without Distorting The Metal Plate. Separate Spot Welding Of Sheet Metal, Panels, Etc., And Cut Out Small Inspection Holes. Also Known As: Spot Weld Drill Bit, Spot Weld Bit, Spot Weld Cutter Drill Bit, Spot Weld Drill Cutter, Spotweld Drill Bits, Spot Weld Cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding.
◆Providing High Quality And Professional Parts With Great Service.If You Have Any Questions, Please Feel Free To Contact Us By Email For More Information!We Will Solve It For You In The First Time!.
◆【Package Include】：1 X Drill With Cutter,2 X Pilot Pin.,11 X Extra 3/8" Cutters. Also Known As: Remover Drill Bits Hex Sheet Metal Hole Cutter Remover, Punch Remover Panel Separator, Spot Weld Cutter Set, 3/8" Rotary Spot Weld Cutter Remover Drill Bits Tool, Metal Hole Cutter Remover.
◆【Material】: The Preferred Material Is Made Of High-Quality Steel With Excellent Heat Resistance, High Hardness And Wear Resistance. The Drill Center Pin Is Spring Type.The Diameter Of The Cutting Blade Is 3/8 Inch, And The Shank Is A Standard 1/4 Inch Size.With A Flat Shank To Eliminate Rotation In The Chuck..
Features
- Fit for : sharp double-sided blades, made of high-quality heat-resistant and thick steel. The perfect tool can remove the spot-welded panel or metal plate without distorting the metal or damaging the panel below, thereby reducing skid welding and The need to break the weld. efficient. Suitable for thin stainless steel plate, iron plate, aluminum plate, F.R.P or other thin metal plates.
- Material : The preferred material is made of high-quality steel with excellent heat resistance, high hardness and wear resistance. The drill center pin is spring type.The diameter of the cutting blade is 3/8 inch, and the shank is a standard 1/4 inch size.with a flat shank to eliminate rotation in the chuck.
- Easy separation The spot welding cutting machine drill bit can easily separate the spot welding plate without distorting the metal plate. Separate spot welding of sheet metal, panels, etc., and cut out small inspection holes. Also known as: spot weld drill bit, spot weld bit, spot weld cutter drill bit, spot weld drill cutter, spotweld drill bits, spot weld cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding
- Package Include 1 x Drill with Cutter,2 x Pilot Pin.,11 x Extra 3/8 cutters. Also known as: Remover Drill Bits Hex Sheet Metal Hole Cutter Remover, Punch Remover Panel Separator, Spot Weld Cutter Set, 3/8 Rotary Spot Weld Cutter Remover Drill Bits Tool, Metal Hole Cutter Remover
- Providing high quality and professional parts with great service.if you have any questions, please feel free to contact us by email for more information!We will solve it for you in the first time!
- See more on Amazon...
Brand: NAKAO | Manufacturer: NAKAO
Dimensions: 0.20 x 2.00 x 1.00 Inches | Weight: 2.20 pounds
See On Amazon #4
Spot Weld Cutter Set JESTUOUS 5-pack 3/8 Inch HSS Remover Welding Metal Sheet Hole Drilling Bits for Power Hand Drill Tool
Asin: B092VPW6JY | Model: JES-SWC-5PCS | PartNumber: JES-SWC-5PCS | Ean: 0792966783461 | UPC: 792966783461
3/8 Inch:Fits For 3/8''Handheld Drill Chucks Or Larger Size And The Spring Loaded Needle Helps Guide The Cutting Blades..
High Quality Material:Made Of High-Speed Steel Material, High Hardness And Heat Resistant..
Convenience:Easy To Handle With And Replace,Fast And Quickly Separates Spot-Welded Panels Without Distortion..
Widely Usage:Suitable For Thin Stainless Steel Sheets, Iron Sheets, Aluminum Sheets,Iron, Cast Iron, Alloy Steel, Carbon Steel Or Other Thin Metal Sheets..
Features
- Includes:5-pack spot weld cutter 3/8 inch heavy duty cutting blades and extra center pin for a long-term usage.
- Widely Usage:Suitable for thin stainless steel sheets, iron sheets, aluminum sheets,iron, cast iron, alloy steel, carbon steel or other thin metal sheets.
- 3/8 Inch:Fits for 3/8''handheld drill chucks or larger size and the spring loaded needle helps guide the cutting blades.
- Convenience:Easy to handle with and replace,fast and quickly separates spot-welded panels without distortion.
- High Quality Material:Made of high-speed steel material, high hardness and heat resistant.
- See more on Amazon...
Brand: JESTUOUS | Manufacturer: Tungsten technology inc
Dimensions: 0.39 x 0.79 x 0.39 inches
See On Amazon #5
Bestgle 3PCS Spot Weld Drill Bits, High Speed Cobalt Steel Weld Cutter Drill Bit with Titanium Coating 1/4-inch (6.5mm), 5/16-inch (8mm), and 3/8-inch (10mm)
Asin: B0BPG96SQS | Model: 20221208A | PartNumber: 20221208A
Unlike Pilot Bits That Drill Through Both Surfaces, These Bits Are Easy To Control While Cutting Without Penetrating The Lower Surface.
Use This Spot Weld Drill Bit To Separate Spot Welds And Resistance Spot Welding Panels Without Distorting The Sheet Metal.Great For Removing Welding Spot Or Drilling Metal Sheets.
Titanium Coating Offers A Smooth Drilling Experience That Prevents Dulling From Overheating For Extended Performance..
Non-Slip Special Centering Nib Design With Flat Shaft For Sure Grip; Pilot Tip Design Increases Accuracy And Prevents Slipping When Held Down For Marking Purposes..
Features
- 1-3/4-inches (45mm) Long; Sizes 1/4-inch (6.5mm), 5/16-inch (8mm) and 3/8-inch (10mm); Each drill bit has permanently etched size markings
- Non-slip special centering nib design with flat shaft for sure grip; pilot tip design increases accuracy and prevents slipping when held down for marking purposes.
- Unlike pilot bits that drill through both surfaces, these bits are easy to control while cutting without penetrating the lower surface
- Titanium coating offers a smooth drilling experience that prevents dulling from overheating for extended performance.
- Use this spot weld drill bit to separate spot welds and resistance spot welding panels without distorting the sheet metal.Great for removing welding spot or drilling metal sheets
- See more on Amazon...
Brand: Bestgle | Manufacturer: Bestgle
See On Amazon #6
Spot Weld Cutter Set 13 Pcs 3/8" Rotary Spot Weld Cutter Remover Drill Bits Tool and 2 Replacement Blades,Metal Hole Cutter Remover for Power Drill Spot Welding
Asin: B07XMB89SP | Model: VAGYD | PartNumber: VAGYD | Ean: 0710568515259 | UPC: 710568515259
[Easy To Separate] The Spot Welding Cutter Drill Can Easily Separate The Spot Welding Plate Without Distorting The Metal Plate. The Spot-Welded Panel Or Metal Plate Can Be Perfectly Removed Without Deforming The Metal Or Damaging The Underlying Panel..
[Quality Service] If You Have Any Doubts Or Dissatisfaction After Receiving The Product, Please Contact Us Immediately, And We Will Provide You With A Satisfactory Solution In A Timely Manner!.
[Package Includes]: 1 Drill Bit With Cutter, 2 Guide Pins., 10 X Additional 3/8 "Cutters. Also Known As: Spot Weld Drill Bit, Spot Weld Bit, Spot Weld Cutter Drill Bit, Spot Weld Drill Cutter, Spotweld Drill Bits, Spot Weld Cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding.
[Material]: The Preferred Material Is High-Quality Steel, Which Has Excellent Heat Resistance, High Hardness, And Wear Resistance. The Blade Diameter Is 3/8 Inch, And The Handle Size Is Standard 1/4 Inch..
Features
- [Suitable]: Sharp double-sided blade, which is more effective in separating spot welded panels than panel cutting machines. The spot-welded panel or metal plate can be perfectly removed without deforming the metal or damaging the underlying panel. Suitable for stainless steel, iron, aluminum, F.R.P, or other metal sheets
- [Material]: The preferred material is high-quality steel, which has excellent heat resistance, high hardness, and wear resistance. The blade diameter is 3/8 inch, and the handle size is standard 1/4 inch.
- [Easy to separate] The spot welding cutter drill can easily separate the spot welding plate without distorting the metal plate. The spot-welded panel or metal plate can be perfectly removed without deforming the metal or damaging the underlying panel.
- [Package includes]: 1 drill bit with cutter, 2 guide pins., 10 x additional 3/8 cutters. Also known as: spot weld drill bit, spot weld bit, spot weld cutter drill bit, spot weld drill cutter, spotweld drill bits, spot weld cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding
- [Quality Service] If you have any doubts or dissatisfaction after receiving the product, please contact us immediately, and we will provide you with a satisfactory solution in a timely manner!
- See more on Amazon...
Brand: VAGYD | Manufacturer: VAGYD
See On Amazon #7
Spot Weld Cutter Set JESTUOUS 12-pack 3/8 Inch Cutting Diameter HSS Remover Welding Metal Sheet Hole Drilling Bits for Power Hand Drill Tool
Asin: B0BYJ371HB | Model: JES-SWC-12 | PartNumber: JES-SWC-12 | Ean: 0792966783652 | UPC: 792966783652
3/8 Inch Fits For 3/8" Handheld Drill Chucks Or Larger Size And The Spring Loaded Needle Helps Guide The Cutting Blades..
High Quality Material Made Of High-Speed Steel Material, High Hardness And Heat Resistant..
Convenience:Easy To Handle With And Replace,Fast And Quickly Separates Spot-Welded Panels Without Distortion..
Widely Usage Suitable For Spotwelding On Most Vehicle Auto Body Panels,And Thin Stainless Steel Sheets, Iron Sheets, Aluminum Sheets,Iron,Cast Iron,Alloy Steel,Carbon Steel Or Other Thin Metal Sheets..
Features
- INCLUDES 12-pack spot weld cutter 3/8 inch heavy duty cutting blades with 3/8" thread shank for a long-term usage.
- WIDELY USAGE Suitable for spotwelding on most vehicle auto body panels,and thin stainless steel sheets, iron sheets, aluminum sheets,iron,cast iron,alloy steel,carbon steel or other thin metal sheets.
- 3/8 INCH Fits for 3/8 handheld drill chucks or larger size and the spring loaded needle helps guide the cutting blades.
- CONVENIENCE:Easy to handle with and replace,fast and quickly separates spot-welded panels without distortion.
- HIGH QUALITY MATERIAL Made of high-speed steel material, high hardness and heat resistant.
- See more on Amazon...
Brand: JESTUOUS | Manufacturer: Tungsten technology inc
Weight: 0.93 Pounds
See On Amazon #8
RENYU 3Pcs Cobalt Spot Weld Drill Bit Set Kit, Titanium Coated High Speed Cobalt Steel Weld Cutter Drill Bit Weld Removal Tool 1/4-inch (6.5mm), 5/16-inch (8mm), and 3/8-inch (10mm)
Asin: B0CNX3634Q | Model: RY006 | PartNumber: RY006
Multi Functional: This Hss Co Cobalt Spot Weld Cutter Kit Is Suitable For A Variety Of Materials, Including Steel, Aluminum And Other Metals, Making It Ideal For Automotive Repair And Other Occasions..
Easy To Use: Spot Weld Cutter Set Is Easy To Use, Designed To Remove Welds Quickly And Efficiently Without Twisting Metal Plates, Saving You Time And Effort When Repairing Your Car And Other Occasions..
Widly Application: Our Spot Weld Drill Bits Are Versatile, Easy To Carry, Fine Workmanship, No Burrs, No Need To Worry About Secondary Spot Welding. It Is Suitable For A-Column Solder Joint Removal, Mechanical Plate Positioning Drilling, General Solder Joint Removal, Automotive Sheet Metal Solder Joint Removal, Etc..
Advanced Material: Our Cobalt Spot Weld Drill Bit Set Is Made Of High-Speed Steel (Hss), Coated With Cobalt And Titanium, Enough Hardness And Durability For A Long Service Life To Meet All Your Usage Needs..
Features
- SPOT WELDING DRILL BIT: Including 3pcs drill bit of 1/4in 5/16in 3/8in, different sizes to meet different requirements. Each drill bit has etched size markings.
- ADVANCED MATERIAL: Our cobalt spot weld drill bit set is made of high-speed steel (HSS), coated with cobalt and titanium, enough hardness and durability for a long service life to meet all your usage needs.
- MULTI FUNCTIONAL: This HSS CO cobalt spot weld cutter kit is suitable for a variety of materials, including steel, aluminum and other metals, making it ideal for automotive repair and other occasions.
- WIDLY APPLICATION: Our spot weld drill bits are versatile, easy to carry, fine workmanship, no burrs, no need to worry about secondary spot welding. It is suitable for A-column solder joint removal, mechanical plate positioning drilling, general solder joint removal, automotive sheet metal solder joint removal, etc.
- EASY TO USE: Spot weld cutter set is easy to use, designed to remove welds quickly and efficiently without twisting metal plates, saving you time and effort when repairing your car and other occasions.
- See more on Amazon...
Brand: RENYU | Manufacturer: RENYU
See On Amazon #9
ABN Spot Weld Cutter Drill Bit 3-Piece Set High-Speed Steel HSS Cobalt Titanium Coated Welding Remover Bits Tool Kit
Asin: B078FGZ22H | Model: ABN-8056 | PartNumber: ABN-8056 | Ean: 0688295878056 | UPC: 688295878056
Built To Last: Titanium Coating Offers A Smooth Drilling Experience That Prevents Dulling From Overheating For Extended Performance; We Recommend Using Cutting Lubricant And A Spot Weld Chisel To Extend The Life Of These Drill Bits (Lubricant And Chisel Not Included).
Package Contents: Package Includes (3) Bits And (1) Storage Case For Your Convenience; Length 1-3/4-Inch (45Mm); Sizes: 1/4-Inch (6.5Mm), 5/16-Inch (8Mm), And 3/8-Inch (10Mm).
Easy Storage: Heavy-Duty 3.9” X 3” X 1.1” Inch (9.9Cm X 7.6Cm X 2.8Cm) Aluminum Carrying Case With Internal Foam Tray For Easy Transportation, Safe Storage, And Quick Organization; Foam Tray Includes Printed Size Markings For Simple Identification.
Specially Designed: Unlike Pilot Bits That Drill Through Both Surfaces, These Bits Are Easy To Control While Cutting Without Penetrating The Lower Surface; Non-Slip Special Centering Nib Design With Flat Shaft For Sure Grip.
Features
- EFFORTLESSLY REMOVE SPOT WELDS: Use the ABN Spot Weld Cutter Drill Bit 3-Piece Set High-Speed Steel HSS Cobalt Titanium Coated Welding Remover Bits Tool Kit to drill into harder steel materials and stainless steel; Length of each bit is 1-3/4-inches (45mm); Sizes include 1/4-inch (6.5mm), 5/16-inch (8mm), and 3/8-inch (10mm); Each drill bit has permanently etched size markings for quick identification
- SPECIALLY DESIGNED: Unlike pilot bits that drill through both surfaces, these bits are easy to control while cutting without penetrating the lower surface; Non-slip special centering nib design with flat shaft for sure grip
- BUILT TO LAST: Titanium coating offers a smooth drilling experience that prevents dulling from overheating for extended performance; We recommend using cutting lubricant and a spot weld chisel to extend the life of these drill bits (lubricant and chisel not included)
- EASY STORAGE: Heavy-duty 3.9 x 3 x 1.1 inch (9.9cm x 7.6cm x 2.8cm) aluminum carrying case with internal foam tray for easy transportation, safe storage, and quick organization; Foam tray includes printed size markings for simple identification
- PACKAGE CONTENTS: Package includes (3) bits and (1) storage case for your convenience; Length 1-3/4-inch (45mm); Sizes: 1/4-inch (6.5mm), 5/16-inch (8mm), and 3/8-inch (10mm)
- See more on Amazon...
Brand: ABN | Manufacturer: ABN
Dimensions: 1.20 x 3.90 x 3.25 inches | Weight: 0.26 pounds
Warranty: This product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.
See On Amazon #10
Neiko 10052A Spot Weld Drill Bits, 5 Pack, High Speed Cobalt Steel with Titanium Coating | 8mm (5/16-Inch)
Asin: B0BKNZLMRJ | Model: BUN5-10052A | PartNumber: BUN5-10052A | Ean: 0816914024854 | UPC: 816914024854
Brand: NEIKO | Manufacturer: Ridgerock Tools, Inc.
See On Amazon #11
Yakamoz 3Pcs Spot Weld Drill Bit Set CO Cobalt Spot Weld Cutter Titanium Coated Spot Welding Drill Bits Spotweld Removal Tool 1/4-inch, 5/16-inch and 3/8-inch
Asin: B0BZHXYD7D | Model: GY0571 | PartNumber: GY0571
Versatile Use: These Drill Bits Are Suitable For Use On A Variety Of Materials, Including Steel, Aluminum, And Other Metals, Making Them Ideal For A Range Of Auto Body Repair Applications..
Durable Construction: Made From High-Speed Steel (Hss) With Cobalt And Titanium Coating, Durable And Resistant To Wear And Tear, Long-Lasting Performance..
Save Time And Effort: Our Spot Weld Drill Bits Are Designed To Remove Welds Quickly And Efficiently, Saving You Time And Effort When Working On Auto Body Repairs..
Precision Drilling: The Sharp Cutting Edges Of Our Spot Weld Drill Bits Ensure Precise Drilling, Making It Easy To Remove Spot Welds Without Damaging The Surrounding Material..
Features
- Easy spot weld removal: Our CO Cobalt Spot Weld Drill Bit Set is designed to make spot weld removal quick and easy, saving you time and effort in auto body repair.
- Precision drilling: The sharp cutting edges of our spot weld drill bits ensure precise drilling, making it easy to remove spot welds without damaging the surrounding material.
- Versatile use: These drill bits are suitable for use on a variety of materials, including steel, aluminum, and other metals, making them ideal for a range of auto body repair applications.
- Save time and effort: Our spot weld drill bits are designed to remove welds quickly and efficiently, saving you time and effort when working on auto body repairs.
- Durable construction: Made from high-speed steel (HSS) with cobalt and titanium coating, durable and resistant to wear and tear, long-lasting performance.
- See more on Amazon...
Brand: YAKAMOZ | Manufacturer: Yakamoz
See On Amazon #12
SeonFook 2PCS Spot Weld Drill Bit Set HSS Co Cobalt Spot Welding Drill Cutter White Diamond Cutting Bits Kit Spot Weld Removal Tool 6mm 8mm
Asin: B09Y1PJYNY | Model: SF-US-023 | PartNumber: SF-US-023
[Precision] The Pointed Guide Tip Of The Welding Spot Removal Drill Tool Is Designed For More Precise Operation, Improving Accuracy And Preventing Slippage When Holding Down The Mark..
[Better Application] Use Spot Weld Drill Cutter To Separate Spot Welds And Resistance Spot Welding Panels Without Distorting The Sheet Metal. It Can Be Multiple Used In Auto Restoration And Body Repair Work To Remove Spot Welds In Boron And Other Materials..
[Wide Use] Perfect For Removing Welding Spot Or Drilling Metal Sheets. Suitable For Thin Stainless Steel Sheets, Copper Sheets, Aluminum Sheets, Etc..
[Premium Material] This Spot Weld Drill Bit Is Made From Hss High Speed Steel With Co Cobalting, Strong Strength And High Hardness, Sturdy To Use..
Features
- [Size] The spot weld cutter has two size: HSS Co 8mm bit at 79mm total length, HSS Co 6mm bit at 65mm total length, easy to use.
- [Premium Material] This spot weld drill bit is made from HSS high speed steel with CO cobalting, strong strength and high hardness, sturdy to use.
- [Precision] The pointed guide tip of the welding spot removal drill tool is designed for more precise operation, improving accuracy and preventing slippage when holding down the mark.
- [Wide Use] Perfect for removing welding spot or drilling metal sheets. Suitable for thin stainless steel sheets, copper sheets, aluminum sheets, etc.
- [Better Application] Use spot weld drill cutter to separate spot welds and resistance spot welding panels without distorting the sheet metal. It can be multiple used in auto restoration and body repair work to remove spot welds in Boron and other materials.
- See more on Amazon...
Brand: SeonFook | Manufacturer: SeonFook
See On Amazon #13
S&F STEAD & FAST Spot Weld Cutter 4-Pack, 3/8" Threaded Shank, 1/4" Depth of Cut, Cutting Diameter 5/16", High Speed Steel Spot Weld Drill Bit, Annular Cutter for Hand Drill
Asin: B0C39WFTD3
Assortment Four Small Annular Cutters With 3/8” Threaded Shank, Cutting Diameter Of 5/16", Suitable For Cutting Up To 1/4” Depth..
Sturdy Plastic And Portable Case Conveniently Stores 4 Pieces Of Threaded Shank Annular Cutter; Keeps All Bits Tidy And At Hand. (Not Include The Arbor And Pilot Pin.).
Applications Spot Face Cutter Can Be Used Not Only For Spot Weld Cutting In Auto Body Panels But Also For General Hole Cutting In Sheet Metal, Piping, Conduit, Electrical, Automotive And Hvac Work..
Fast Cutting And Long Life Premium Spot Weld Cutters Drill 3 Times Faster Than Twist Drill Bits Or Double Sided Cutters And Last Much Longer..
Features
- PREMIUM HSS STEEL Drill bit cutters with thick walls made of super hard M2AL High Speed Steel (HRC 66), designed for wear resistance and superior performance.
- FAST CUTTING AND LONG LIFE Premium spot weld cutters drill 3 times faster than twist drill bits or double sided cutters and last much longer.
- ASSORTMENT Four small annular cutters with 3/8 threaded shank, cutting diameter of 5/16, suitable for cutting up to 1/4 depth.
- APPLICATIONS Spot face cutter can be used not only for spot weld cutting in auto body panels but also for general hole cutting in sheet metal, piping, conduit, electrical, automotive and HVAC work.
- STURDY PLASTIC and PORTABLE CASE Conveniently stores 4 pieces of threaded shank annular cutter; keeps all bits tidy and at hand. (Not include the arbor and pilot pin.)
- See more on Amazon...
Brand: S&F STEAD & FAST | Manufacturer: S&F STEAD & FAST
Dimensions: 0.98 x 0.79 x 0.79 inches
See On Amazon #14
Yakamoz 2Pcs Spot Weld Drill Bit Set HSS Co Cobalt Spot Welded Cutter Separate Panels Hole Cutting Bits Spot Welding Remover Tool, 6mm 8mm
Asin: B09DPMVCDZ | Model: GY0493 | PartNumber: GY0493
Precise Position: Nibbed Pilot Tip Design Increases Accuracy And Prevents Slipping When Held Down For Marking Purposes..
High Quality: Made From Hss High Speed Steel With Co Cobalting, Strong Strength And High Hardness, Durable To Use..
Application: Use This Spot Weld Drill Bit To Separate Spot Welds And Resistance Spot Welding Panels Without Distorting The Sheet Metal..
Durable: Special Grade High Speed Steel Cobalt Mix Is Designed For Long Service Life To Withstand Quick Speed Running Rate And High-Temperature Applications..
Features
- Size: HSS Co 8mm bit at 3-1/8" (79mm) total length, HSS Co 6mm bit at 2-1/2" (65mm) total length, easy to use.
- Durable: Special grade high speed steel cobalt mix is designed for long service life to withstand quick speed running rate and high-temperature applications.
- Precise Position: Nibbed pilot tip design increases accuracy and prevents slipping when held down for marking purposes.
- Application: Use this spot weld drill bit to separate spot welds and resistance spot welding panels without distorting the sheet metal.
- High Quality: Made from HSS high speed steel with CO cobalting, strong strength and high hardness, durable to use.
- See more on Amazon...
Brand: YAKAMOZ | Manufacturer: Yakamoz
See On Amazon #15
EEEkit Rotary Spot Weld Cutter Sets Double Sided 13-pack, 3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover for Power Drill Spot Welding
Asin: B07GYLDTFM
Easily Separation: Spot Weld Cutter Drill Bit For Easily Separate Spot-Welded Panels Without Distorting The Sheet Metal. Separate Spot-Welded Sheet Metal, Panel, Etc, And Cut Small Access Holes..
Application: Suitable For Thin Stainless Steel Sheets, Iron Sheets, Aluminum Sheets, F.R.P, Or Other Thin Metal Sheets..
Double-Sided Weld Cutter: This Weld Cutter Is A Double-Sided Rotary Cutter Blade That Separates Spot-Welded Panels More Effectively Than A Panel Cutter. Double-Sided 3/8 Inch Rotary Blade And Hex Shank Fit Most Drills..
Wear Resistance: Made Of High-Speed Steel Material, High Hardness, And Wear-Resistant. The Center Pin On The Bit Is Spring-Loaded. Sharp Double-Sided Blades For High Efficiency..
Features
- SPOT WELD CUTTER TOOL: It is easy to replace when the electric drill blades begin to dull. The package includes a 13 PCS 3/8 inches spot weld cutter.
- WEAR RESISTANCE: Made of high-speed steel material, high hardness, and wear-resistant. The Center pin on the bit is spring-loaded. Sharp double-sided blades for high efficiency.
- EASILY SEPARATION: Spot weld cutter drill bit for easily separate spot-welded panels without distorting the sheet metal. Separate Spot-welded sheet metal, panel, etc, and cut small access holes.
- DOUBLE-SIDED WELD CUTTER: This weld cutter is a double-sided rotary cutter blade that separates spot-welded panels more effectively than a panel cutter. Double-sided 3/8 inch rotary blade and Hex Shank fit most drills.
- APPLICATION: Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P, or other thin metal sheets.
- See more on Amazon...
Brand: EEEKit | Manufacturer: EEEkit
Dimensions: 1.00 x 6.00 x 1.00 Inches | Weight: 0.06 pounds
See On Amazon #16
Reppkyh 15-Pack Spot Weld Cutter Sets - Double Sided 3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover for Power Drill Spot Welding
Asin: B08QRYC6PP | Model: R1Q-003 | PartNumber: R1Q-003 | Ean: 0192531100370 | UPC: 192531100370
Spot Weld Cutter Tool : Easy To Replace The Blades When It Begins To Dull.
Package : Our Spot Weld Cutter Set Includes: 1 X Cutter Drill With Double Cutter+11 X Extra 3/8 Inch Cutters+2 X Pilot Pins..
High Speed And Stable : Drilling Stably, Small Incision Resistance, High Speed, Do Not Breaking The Border. The Item Great For Removing Spot-Welded Panels Or Metal Sheets Without Distorting The Metal Or Damaging The Underlying Panel, Alleviates The Need To Pry And Break Welds..
High-Quality Material : The Double-Sided Blade Is Made Of Heat Resistant Thicker Steel In High Standards. High Strength And Hardness, Which Ensure Quickly Separates Spot-Welded Panels Without Distortion. Center Pin On The Bit Is Spring-Loaded..
Features
- Widely applicable : The 3/8 inch cutting spot welds remover fits most 1/4 inch drills, arbor with flats to elimi te spinning in chuck. Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P or other thin metal sheets.
- High-quality Material : The double-sided blade is made of heat resistant thicker steel in high standards. High strength and hardness, which ensure quickly separates spot-welded panels without distortion. Center pin on the bit is spring-loaded.
- Spot Weld Cutter Tool : Easy to replace the blades when it begins to dull
- High Speed and Stable : Drilling stably, small incision resistance, high speed, do not breaking the border. the item great for removing spot-welded panels or metal sheets without distorting the metal or damaging the underlying panel, alleviates the need to pry and break welds.
- Package : Our Spot Weld Cutter Set includes: 1 x Cutter Drill With Double Cutter+11 x Extra 3/8 inch Cutters+2 x Pilot Pins.
- See more on Amazon...
Brand: Reppkyh | Manufacturer: Reppkyh
See On Amazon #17
3Pcs CO Cobalt Spot Weld Drill Bit Set Weld Cutter Remover Point Drill Bits Solder Drill Tools 1/4in 5/16in 3/8in
Asin: B0868QJ719 | Model: FTVOGUEg5a1msqhvo | PartNumber: FTVOGUEg5a1msqhvo
High-Speed Steel Containing Cobalt Is A Good Combination Of Toughness And Hardness, For Use On Drilling Through Hard Substances, Commonly Used For Locating Spot Welds In Automobile Frames..
Spot Weld Cutter Set Including 3 Pcs Different Size Bit Comes Into 1 Storage Box For Your Convenience. Including 3Pcs Drill Bit Of 1/4In 5/16In 3/8In To Meet Different Requirements..
Notice:We Recommend Using Cutting Lubricant And A Spot Weld Chisel To Extend The Life Of These Drill Bits (Lubricant And Chisel Not Included)..
The Titanium Coating On The Surface Of The Spot Weld Drill Bit Provides A Smooth Drilling Experience And Prevents Dulling Due To Overheating, Extending Performance..
Features
- Containing Cobalt Spot Weld Drill use for Remove Sheet Metal Solder Joints. Flat shaft for sure grip, special centering nib design to avoid slipping.
- The titanium coating on the surface of the spot weld drill bit provides a smooth drilling experience and prevents dulling due to overheating, extending performance.
- High-speed steel containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances, commonly used for locating spot welds in automobile frames.
- Notice:We recommend using cutting lubricant and a spot weld chisel to extend the life of these drill bits (lubricant and chisel not included).
- Spot weld cutter set including 3 pcs different size bit comes into 1 Storage Box for your convenience. Including 3pcs drill bit of 1/4in 5/16in 3/8in to meet different requirements.
- See more on Amazon...
Brand: FTVOGUE | Manufacturer: FTVOGUE
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.26 pounds
See On Amazon #18
Spot Weld Cutter 3/8 5/16 High Speed Steel Rotary Spot Weld Drill Cutter Remover Carbide Bit Spot Weld Drill Bit (3/8" + 5/16")
Asin: B07L3X6CK1 | Ean: 0794419818348 | UPC: 794419818348
Sharp Sawtooth: Sharp Sawtooth Of The Spot Weld Cutter Makes Sure Fast And Smooth Cut Under High Speed..
Three Options: Three Sizes Of The Spot Weld Drill Bits Are Available For You To Choose, And You Can Choose 3/8", 5/16" Or Both Of Them..
Fit For: The Carbide Rotary Spot Weld Cutter Can Be Installed On Electric Rotary Tool To Remove Welding Spot..
Carbide Material: Made Of High Quality Carbide Material, The Drill Bit Tip Is Of High Hardness And Hard To Break..
Features
- HIGH SPEED STEEL: The shank of the spot welding drill bit is forged with high speed steel, which is sturdy and not easy to deform.
- CARBIDE MATERIAL: Made of high quality carbide material, the drill bit tip is of high hardness and hard to break.
- SHARP SAWTOOTH: Sharp sawtooth of the spot weld cutter makes sure fast and smooth cut under high speed.
- FIT FOR: The carbide rotary spot weld cutter can be installed on electric rotary tool to remove welding spot.
- THREE OPTIONS: Three sizes of the spot weld drill bits are available for you to choose, and you can choose 3/8, 5/16 or both of them.
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.79 x 3.94 x 0.79 Inches | Weight: 0.11 pounds
See On Amazon #19
Eyech 3PCS Spot Weld Cutter Drill Bits HSS CO Cobalt Spot Weld Removal Tool 6.5MM 8MM 10MM
Asin: B0BW8M9FM2 | Model: EYEUS-GY0571 | PartNumber: EYEUS-GY0571
Easily Separate Spot Welded Panels Without Twisting Metal Plates.The Spot Weld Drill Bits Can Separate Spot Welding Of Sheet Metal, Panels, Etc..
The Pilot Tip Design, Better To Position, Prevent Slipping..
Each Spotting Weld Drill Bit Has Permanently Etched Size Markings For Quick Identification..
Made Of High Hardness Metal Material With Titanium Plated Surface To Provide Long-Term Use..
Features
- The spot welding bits have 3 sizes of 6.5mm 8mm 10mm, meet your different needs.
- Made of high hardness metal material with titanium plated surface to provide long-term use.
- Easily separate spot welded panels without twisting metal plates.The spot weld drill bits can separate spot welding of sheet metal, panels, etc.
- Each spotting weld drill bit has permanently etched size markings for quick identification.
- The pilot tip design, better to position, prevent slipping.
- See more on Amazon...
Brand: Eyech | Manufacturer: Eyech
See On Amazon
Looking For Something Else?
Search