YG-1 E5976 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, 37 Deg Helix, 2 Flutes, 7" Overall Length, 0.75" Cutting Diameter, 0.75" Shank Diameter
Asin: B0080CJYSY | Model: 39905 | PartNumber: 39905 | Ean: 0300878206499 | UPC: 300878206499
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon Similar To YG1 E5976 Carbide Square Nose
#1
F&D Tool Company 30265-X616 Square Tool Bits, Red Nose, Cobalt, 3/8 Square Inch, 3" Overall Length
Asin: B00I67HOTY | Model: 30265-X616 | PartNumber: 30265-X616
A Superior Quality Full Ground Tool Bit That Preforms Exceptionally Well On Forgings, Castings And Any Cuts Of Heavy Nature Or Where High Heat Is A Factor.
Made In Usa.
Red Nose (Cobalt) - Inches Square: 3/8 - Length Overall: 3.
Features
- Square Tool Bit
- Red Nose (Cobalt) - Inches Square: 3/8 - Length Overall: 3
- A superior quality Full Ground Tool Bit that preforms exceptionally well on forgings, castings and any cuts of heavy nature or where high heat is a factor
- Made in USA
- See more on Amazon...
Brand: F&D Tool Company | Manufacturer: F&D Tool Company
See On Amazon #2
YG-1 E5982 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 45 Deg Helix, 3 Flutes, 4" Overall Length, 0.4375" Cutting Diameter, 0.4375" Shank Diameter
Asin: B0080BK81M | Model: 36588 | PartNumber: 36588
45-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
Features
- Suitable for high-performance machining on aluminum and other nonferrous materials
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- 45-degree helix provides increased cutting action compared to end mills with lower helix angles
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.25 Pounds
See On Amazon #3
YG-1 E5974 Carbide Ball Nose End Mill, Uncoated (Bright) Finish, 50 Deg Helix, 2 Flutes, 3" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080HBGX0 | Model: 37593 | PartNumber: 37593 | Ean: 0768413467369 | UPC: 768413467369
50-Degree Helix Offers Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Stub Length Cutting Edges Increase The Strength Of The Tool, Making It Less Likely To Break In The Workpiece.
Features
- Suitable for high-performance machining on aluminum, stainless steel, and copper
- Stub length cutting edges increase the strength of the tool, making it less likely to break in the workpiece
- 50-degree helix offers increased cutting action compared to end mills with lower helix angles
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.15 pounds
See On Amazon #4
YG-1 E5978 Carbide Ball Nose End Mill, Long Reach, Uncoated (Bright) Finish, 37 Deg Helix, 2 Flutes, 6" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080HAMV2 | Model: 89902 | PartNumber: 89902 | Ean: 0768413467666 | UPC: 768413467666
37-Degree Helix Provides Increased Cutting Action And Chip Evacuation Compared To Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- 37-degree helix provides increased cutting action and chip evacuation compared to lower helix angles
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #5
YG-1 E5975 Carbide Ball Nose End Mill, Coolant Through, Uncoated (Bright) Finish, 40 Deg Helix, 3 Flutes, 2.375" Overall Length, 0.125" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080HA43I | Model: 38601 | PartNumber: 38601 | Ean: 0768413467444 | UPC: 768413467444
40-Degree Helix Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
Features
- Suitable for high-performance machining on aluminum, stainless steel, and copper
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- 40-degree helix provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #6
JIULI TOOL HRC65 High Hard Carbide End Mills Set 4 Flutes Tungsten Steel Square Nose Milling Cutter for Steel 6pcs 1mm 2mm 3mm 4mm 5mm 6mm
Asin: B0BCHLHFPT | Model: 65 4F 6pcs 1-6 | PartNumber: 65 4F 6pcs 1-6
[5]Main Features: 45° Helix Angle Design, End Mills For High Hardness And High Speed Cutting Applications. The Cutting Edge Is Coated With Nano-Blue, Which Can Directly Perform High-Speed Roughing And Finishing Of Heat-Treated Materials Below Hrc 65, Reduce The Number Of Tool Changes, Improve Machine Tool Productivity, Save Groove Design And Grinding Method Manufacturing Time, And Have High Chip Conduction, Ag, The Advantages Of Long Service Life And High Surface Finish After Processing..
[7] Applicable Machine Tools: Cnc Machining Centers, Engraving Machines, Precision Engraving Machines And Other High-Speed Machines..
[6]Processing Methods: Finishing, Semi-Finishing, Surface Processing, Arc Processing, Irregular Processing..
[3]Material:Solid Carbide End Mills,Bar: 0.3Um Granular Tungsten Steel, For High-Hard Materials And High-Speed Machining Fields, The Optimized Nano Silicon Nitride Coating Makes The Tool Have High Temperature Stability. [4]Applicable Cutting Materials: Alloy Steel, Carbon Steel, Quenched And Tempered Steel, Hrc 55-65 High Hardness Material..
Features
- [1]Package: Square Nose end mills set 6pcs. Annotation: d=Flutes diam, D=Shank diam, C=Flutes length, L=Full length. [2] Dimensions include: (d1x3Cx4Dx50L)+(d2x6Cx4Dx50L)+(d3x8Cx4Dx50L)+(d4x10Cx4Dx50L)+(d5x13Cx6Dx50L)+(d6x15Cx6Dx50L).
- [3]Material:Solid Carbide End Mills,Bar: 0.3um granular tungsten steel, for high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high temperature stability. [4]Applicable cutting materials: alloy steel, carbon steel, quenched and tempered steel, HRC 55-65 high hardness material.
- [5]Main features: 45 helix angle design, end mills for high hardness and high speed cutting applications. The cutting edge is coated with NANO-BLUE, which can directly perform high-speed roughing and finishing of heat-treated materials below HRC 65, reduce the number of tool changes, improve machine tool productivity, save groove design and grinding method manufacturing time, and have high chip conduction, AG, the advantages of long service life and high surface finish after processing.
- [6]Processing methods: finishing, semi-finishing, surface processing, arc processing, irregular processing.
- [7] Applicable machine tools: CNC machining centers, engraving machines, precision engraving machines and other high-speed machines.
- See more on Amazon...
Brand: JIULI TOOL | Manufacturer: JIULI TOOL
See On Amazon #7
YG-1 - 2558 E5011 Carbide Square Nose End Mill, Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2.25" Overall Length, 0.125" Cutting Diameter, 0.125" Shank Diameter
Asin: B0080CPUIW | Model: 02558 | PartNumber: 02558
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Features
- Suitable for general-purpose machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.05 pounds
See On Amazon #8
YG-1 - 19176 E1072 High Speed Steel (HSS) Square Nose End Mill, Extra Long Reach, Weldon Shank, Uncoated (Bright) Finish, 42 Deg Helix, 2 Flutes, 8.5" Overall Length, 1" Cutting Diameter, 1" Shank Diameter
Asin: B0080CXXEU | Model: 19176 | PartNumber: 19176 | Ean: 0733438191766 | UPC: 733438191766
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
High-Speed Steel For General-Purpose Cutting.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
42-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Features
- Suitable for machining on aluminum and other nonferrous materials
- 42-degree helix provides increased cutting action compared to end mills with lower helix angles
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- High-speed steel for general-purpose cutting
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 1.36 pounds
See On Amazon #9
YG-1 E5023 Carbide Square Nose End Mill, Double End, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 2" Overall Length, 0.171875" Cutting Diameter, 0.1875" Shank Diameter
Asin: B0080BFH86 | Model: 33564 | PartNumber: 33564
Stub Length Increases The Strength Of The Tool, Making It Less Likely To Break In The Workpiece.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Four Flutes Produce A Better Finish Than Fewer Flutes.
Suitable For General-Purpose Machining On Hardened And High-Alloy Steel, Chromium-Nickel Steel, Steel Casting, Malleable Cast Iron, Brass, Copper, Aluminum With A High Percentage Of Silicon, And Abrasive Plastic.
Features
- Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life
- Suitable for general-purpose machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Stub length increases the strength of the tool, making it less likely to break in the workpiece
- Four flutes produce a better finish than fewer flutes
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #10
YG-1 - 52558 E5018 Carbide Ball Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 3" Overall Length, 0.125" Cutting Diameter, 0.125" Shank Diameter
Asin: B0080D4ICA | Model: 52558 | PartNumber: 52558
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Ball Nose End Mills (Also Called Ball End) Create Contoured Surfaces.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Ball nose end mills (also called ball end) create contoured surfaces
- See more on Amazon...
First Available: 11/25/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #11
YG-1 E1071 High Speed Steel (HSS) Square Nose End Mill, Long Reach, Weldon Shank, Uncoated (Bright) Finish, 42 Deg Helix, 2 Flutes, 3.0625" Overall Length, 0.25" Cutting Diameter, 0.375" Shank Diameter
Asin: B0080CZUU0 | Model: 18047 | PartNumber: 18047 | Ean: 0733438180470 | UPC: 733438180470
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
High-Speed Steel For General-Purpose Cutting.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
42-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Features
- Suitable for machining on aluminum and other nonferrous materials
- 42-degree helix provides increased cutting action compared to end mills with lower helix angles
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- High-speed steel for general-purpose cutting
- See more on Amazon...
First Available: 12/12/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.10 pounds
See On Amazon #12
Wokesi Pack of 7Pcs,1.5 2 2.5 3 4 5 6mm Blade Diameter,High Speed Steel M2AL,Square Nose End Mill Cutter CNC Router Bits(1.5+2+2.5+3+4+5+6mm 4Flute HSS)
Asin: B071L7TJF5 | Ean: 1909070368081
Suitable For Aluminium,Cast Iron,Copper,Magnesium Alioy,Plastics,Wood Etc.
Package:7Pc×Cutter.
4Flute,Full Grinded,High Abrasion Resistance,Obtain Accuracy And Fine Finish..
Material:M2ai,High Speed Steel,Long Tool Life..
Features
- Contains 7Pcs square nose endmills:1.5+2+2.5+3+4+5+6mm blade diameter
- Material:M2AI,High Speed Steel,long tool life.
- Suitable for aluminium,cast iron,copper,magnesium alioy,plastics,wood etc
- 4Flute,Full grinded,high abrasion resistance,obtain accuracy and fine finish.
- Package:7pc cutter
- See more on Amazon...
Brand: WKS TOOL | Manufacturer: WOKESI
See On Amazon #13
1 pcs Solid Carbide End Mills, Square Nose, Bright (Uncoated) Finish, 1/2" Mill Diameter, 3" Length of Cut, 6" Overall Length, 2 Flute, Center Cutting
Asin: B0C2JN4499
Harder And Higher Heat-Resistance Allows These Micrograin Carbide End Mills To Last Much Longer Than High-Speed Steel And Cobalt Steel End Mills; Can Be Run At Significantly Higher Speeds To Decrease Manufacturing Times.
Individually Packaged In Solid Plastic Tubes; 1 Pieces Per Order.
Bright Finish Prevents The Edge Buildup That Commonly Occurs When Machining Nonferrous "Gummy" Materials Such As Aluminum.
General Purpose End Mill That Creates Square Corners; Used For Both Roughing And Finishing Applications.
Features
- 1/2" Cut Diameter; 3" Length of Cut; 6" Overall Length; 1/2" Shank Diameter; 2 Flute; 35 Helix Angle
- General purpose end mill that creates square corners; Used for both roughing and finishing applications
- Harder and higher heat-resistance allows these micrograin carbide end mills to last much longer than high-speed steel and cobalt steel end mills; Can be run at significantly higher speeds to decrease manufacturing times
- Bright finish prevents the edge buildup that commonly occurs when machining nonferrous gummy materials such as aluminum
- Individually packaged in solid plastic tubes; 1 pieces per order
- See more on Amazon...
Brand: CME Tools | Manufacturer: CME Tools
See On Amazon #14
YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6" Overall Length, 0.4375" Cutting Diameter, 0.4375" Shank Diameter -55588
Asin: B0080C5GJU | Model: 55588 | PartNumber: 55588 | Ean: 0085937555885 | UPC: 085937555885
Four Flutes Produce A Better Finish Than Fewer Flutes.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Four flutes produce a better finish than fewer flutes
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #15
uxcell Square Nose End Mill, 6mm Tip Dia Solid Carbide AlTiN Coated CNC Router Bits 2 Flute Spiral Milling Cutter HRC55 with 6mm Shank 100mm (4-inch) Length
Asin: B09T3PGX8Y | Model: a22010500ux0316 | PartNumber: a22010500ux0316
Wide Applications: Suitable For Cutting Carbon Steel, Malleable Cast Iron, Alloy Steel, Stainless Steel, Die Steel, Tool Steel, Heat Treated Steel. For Shallow Groove Machining, Side Milling And Finishing. Use On Cnc Machining Centers, Engraving Machines And Other High-Speed Cnc Machine Tools..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Obtain Better Processing Accuracy And Performance..
Features: Square End Cut, 2-Flute Design, Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting. Altin Composite Coating Can Increase Hardness, Reduce Oxidation Wear For Better Wear Resistance And Extend Tool Life..
Solid Carbide Tool: M30 Carbide End Mill Cutter Is Super Fine Grain Carbide, With High Hardness, Wear Resistance, And Heat Resistance. Carbide Material With Good Milling And Cutting Performance. Carbide Can Run At Higher Speed Than High-Speed Steel..
Features
- Square Nose End Mill: Cutting Diameter: 6mm / 0.24"; cutting flute length: 30mm / 1.18"; shank diameter: 6mm / 0.24"; overall length: 100mm / 4"; cutting hardness: HRC55; spiral angle: 35 degree.
- Solid Carbide Tool: M30 carbide end mill cutter is super fine grain carbide, with high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance. Carbide can run at higher speed than high-speed steel.
- Wide Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, stainless steel, die steel, tool steel, heat treated steel. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- Features: Square end cut, 2-flute design, spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. AlTiN composite coating can increase hardness, reduce oxidation wear for better wear resistance and extend tool life.
- Tips: The longer the length of the tool clamped by the chuck, the better. Combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
Drill America DEWC-5C6 5/16" C6 Carbide Tipped Square Nose Toolbit, Dew Series
Asin: B0771FDZPV | Model: DEWC-5C6 | PartNumber: DEWC-5C6 | Ean: 0887861167222 | UPC: 887861167222
Dew Series.
Qualtech Brand.
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 2.00 pounds
See On Amazon #17
YG-1 E5978 Carbide Ball Nose End Mill, Long Reach, Uncoated (Bright) Finish, 37 Deg Helix, 2 Flutes, 5" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080HAH30 | Model: 89593 | PartNumber: 89593
37-Degree Helix Provides Increased Cutting Action And Chip Evacuation Compared To Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- 37-degree helix provides increased cutting action and chip evacuation compared to lower helix angles
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.48 pounds
See On Amazon #18
YG-1 E2005 Cobalt Steel Micro Square Nose End Mill, Double End, Long Reach, Uncoated (Bright) Finish, 39 Deg Helix, 2 Flutes, 2.5" Overall Length, 0.0625" Cutting Diameter, 0.1875" Shank Diameter
Asin: B0080CKV1S | Model: 51256 | PartNumber: 51256
Long-Length Miniature End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length Miniature End Mills.
Cobalt Steel Resists Abrasion And High Cutting Temperatures, And Has Higher Feed Rates Than High-Speed Steel.
Suitable For Finishing Precision Components On Steel, Stainless Steel, Titanium, Titanium Alloys, Hard Brass And Bronze, Copper, Plastic, Wood, Aluminum, And Aluminum Alloys.
Double-End Square End Mills Create Sharp, Unrounded Cuts And Have Cutting Edges On Both Ends For Longer Tool Life.
Features
- Miniature end mills have small cutting and shank diameters for better control than larger tools when creating precise details and contours
- Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life
- Long-length miniature end mills have longer cutting edges and can make deeper cuts than standard-length miniature end mills
- Suitable for finishing precision components on steel, stainless steel, titanium, titanium alloys, hard brass and bronze, copper, plastic, wood, aluminum, and aluminum alloys
- Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.15 pounds
See On Amazon #19
YG-1 E5976 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, 37 Deg Helix, 2 Flutes, 6" Overall Length, 0.75" Cutting Diameter, 0.75" Shank Diameter
Asin: B0080CJYAW | Model: 39904 | PartNumber: 39904 | Ean: 0300878206475 | UPC: 300878206475
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #20
YG-1 E5976 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 37 Deg Helix, 2 Flutes, 4" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080CJOLQ | Model: 39573 | PartNumber: 39573 | Ean: 0300878206291 | UPC: 300878206291
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
First Available: 12/12/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.05 pounds
See On Amazon
Looking For Something Else?
Search