BQLZR Generic 10 Degree 0.1mm Carbide Engraving Bits CNC Router Tool for PCB Board Pack of 10
Asin: B00EQ1WI2C | Model: N03252 | PartNumber: N03252 | Ean: 0700443093378 | UPC: 700443093378
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Made Of Cemented Carbide, High Hardness, Good Heat Resistance, Not Easy To Wear.
The Diameter Of The Shank Is About 3.175Mm, And It Can Be Installed On The Rotary Tool When Combined With The Collet..
Note: You Have To Remember That The Tips Are Very Small, Like Sharps That Are Smaller Than The Tip Of A Needle, So Go Slow Or You'll Break Them..
Multifunctional Tool: It Can Be Used For Engraving, Cutting, Milling, Grooving, Grinding, Finishing, 2D Or 3D Engraving, Surface Processing, Etc..
Processing Use: Suitable For Two-Color Board, Acrylic, Mdf, Pvc, Plane Engraving, Rough Processing.
Features
- Size: Shank diameter is about 3.175mm, tool tip is 0.1mm, angle is 10 degrees
- Processing use: suitable for two-color board, acrylic, MDF, PVC, plane engraving, rough processing
- Made of cemented carbide, high hardness, good heat resistance, not easy to wear
- Multifunctional tool: It can be used for engraving, cutting, milling, grooving, grinding, finishing, 2D or 3D engraving, surface processing, etc.
- The diameter of the shank is about 3.175mm, and it can be installed on the rotary tool when combined with the collet.
- NOTE: You have to remember that the tips are very small, like sharps that are smaller than the tip of a needle, so go slow or you'll break them.
- See more on Amazon...
Brand: BQLZR | Manufacturer: BQLZR
Dimensions: 0.00 x 3.11 x 0.13 Inches | Weight: 0.11 Pounds
See On Amazon Similar To BQLZR Generic 10 Degree 0.1mm
#1
BQLZR 20 Degree 0.1mm Carbide Engraving Bits CNC Router Tool for PCB Board Pack of 10
Asin: B00EQ1X1GY | Model: N02512 | PartNumber: N02512 | Ean: 0700443096829 | UPC: 700443096829
Razor Blades Permanently Enclosed In A Cartridge Or Housing With Less Than 2Mm Of Blade Exposed. The Bladed Product Is Not Use For People Under 18 Years. The Item Is Only Use For Industrial /Engraving, Not Hazardous Article..
Suggestion: The Feed Speed And Spindle Speed When Processing Pcb Prototypes Should Start From Low Speed.
It Is Made Of Hard Alloy, With High Hardness, Good Heat Resistance And Not Easy To Wear.Even After Continuous Use For A Long Time, There Will Be No Obvious Signs Of Wear, And Even The Tip Still Feels Very Sharp..
It Can Be Used To Carve Precise Details, Such As Using These To Carve Copper-Plated Pvc Board, Which Can Remove Fine Lines On The Surface Of Glass Fiber Printed Circuit Board And Deal Copper,Engraving Soft Wood.
The Shank Diameter Is About 3.175Mm, Which Can Be Installed On The Rotating Tool When Combined With 1/8 "Collet.
Router Tool For Pcb Board.
Features
- 20 Degree 0.1mm Carbide Engraving Bits
- Router Tool For PCB Board
- Razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed. The bladed product is not use for people under 18 years. The item is only use for industrial /engraving, not hazardous article.
- The shank diameter is about 3.175mm, which can be installed on the rotating tool when combined with 1/8 collet
- It is made of hard alloy, with high hardness, good heat resistance and not easy to wear.Even after continuous use for a long time, there will be no obvious signs of wear, and even the tip still feels very sharp.
- It can be used to carve precise details, such as using these to carve copper-plated PVC board, which can remove fine lines on the surface of glass fiber printed circuit board and deal copper,engraving soft wood
- Suggestion: The feed speed and spindle speed when processing PCB prototypes should start from low speed
- See more on Amazon...
Brand: BQLZR | Manufacturer: BQLZR
Dimensions: 0.00 x 1.27 x 0.13 Inches | Weight: 0.09 Pounds
See On Amazon
Looking For Something Else?
Search