BQLZR 20 Degree 0.1mm Carbide Engraving Bits CNC Router Tool for PCB Board Pack of 10
Asin: B00EQ1X1GY | Model: N02512 | PartNumber: N02512 | Ean: 0700443096829 | UPC: 700443096829
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Razor Blades Permanently Enclosed In A Cartridge Or Housing With Less Than 2Mm Of Blade Exposed. The Bladed Product Is Not Use For People Under 18 Years. The Item Is Only Use For Industrial /Engraving, Not Hazardous Article..
Suggestion: The Feed Speed And Spindle Speed When Processing Pcb Prototypes Should Start From Low Speed.
It Is Made Of Hard Alloy, With High Hardness, Good Heat Resistance And Not Easy To Wear.Even After Continuous Use For A Long Time, There Will Be No Obvious Signs Of Wear, And Even The Tip Still Feels Very Sharp..
It Can Be Used To Carve Precise Details, Such As Using These To Carve Copper-Plated Pvc Board, Which Can Remove Fine Lines On The Surface Of Glass Fiber Printed Circuit Board And Deal Copper,Engraving Soft Wood.
The Shank Diameter Is About 3.175Mm, Which Can Be Installed On The Rotating Tool When Combined With 1/8 "Collet.
Router Tool For Pcb Board.
Features
- 20 Degree 0.1mm Carbide Engraving Bits
- Router Tool For PCB Board
- Razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed. The bladed product is not use for people under 18 years. The item is only use for industrial /engraving, not hazardous article.
- The shank diameter is about 3.175mm, which can be installed on the rotating tool when combined with 1/8 collet
- It is made of hard alloy, with high hardness, good heat resistance and not easy to wear.Even after continuous use for a long time, there will be no obvious signs of wear, and even the tip still feels very sharp.
- It can be used to carve precise details, such as using these to carve copper-plated PVC board, which can remove fine lines on the surface of glass fiber printed circuit board and deal copper,engraving soft wood
- Suggestion: The feed speed and spindle speed when processing PCB prototypes should start from low speed
- See more on Amazon...
Brand: BQLZR | Manufacturer: BQLZR
Dimensions: 0.00 x 1.27 x 0.13 inches | Weight: 0.09 pounds
See On Amazon Similar To BQLZR 20 Degree 0.1mm Carbide
#1
Genmitsu 10Pcs Nano Blue Coat Engraving Bits, 20 Degree 0.1mm Tip 1/8" Shank Conical V-Bit
Asin: B07P71RDPL | Model: CNC60-70V | PartNumber: CNC60-70V | Ean: 4897093841360
➤Advantage: The Mirror Grinding Processing For Cutting Edge Leads To A Perfect Surface Finish And Reducing Chance Of Glitch And Deviation..
➤Application: It Is Mainly Used For Acrylics, Plastics, Carbon Fiber, Chipboard, Mdf, Pcb, Solid Surface, Wood. To Learn More About How To Choose The Right Bits To Meet Your Needs, Please Find The Comparison Chart (Cnc Bits Buying Guide) At The Product Guides And Documents Section Below..
➤Ultimate Experience: Ultra-Fine Cnc Engraving Bits Can Help You Get Your Projects And Work Done Well..
➤Made Of Alloy Steel: With Super Hardness, Wear, Break And Corrosion Resistant. This Durable Cnc Bit With A Long Lifespan Which Can Help You Work Efficiently..
Features
- V-Shaped Design: With a sharper cutting edge, that can help you do neat cuts.
- Made of Alloy Steel: With super hardness, wear, break and corrosion resistant. This durable CNC bit with a long lifespan which can help you work efficiently.
- Advantage: The mirror grinding processing for cutting edge leads to a perfect surface finish and reducing chance of glitch and deviation.
- Ultimate Experience: Ultra-fine CNC engraving bits can help you get your projects and work done well.
- Application: It is mainly used for acrylics, plastics, carbon fiber, chipboard, MDF, PCB, solid surface, wood. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #2
F.L.S 20pcs 10 15 20 30 3.175mm Carbide PCB Engraving Drill Bits CNC Bit Router Tool 0.1mm
Asin: B07BTNHSH9 | Ean: 9194699986859
Shank Diameter: 3.175Mm.
Total Length: 30Mm±1Mm.
Cutting Edge Diameter: 0.1Mm.
Degree: 10° 15° 20° 30°.
Features
- Shape: V-shape
- Degree: 10 15 20 30
- Shank diameter: 3.175mm
- Cutting edge diameter: 0.1mm
- Total length: 30mm 1mm
- See more on Amazon...
Brand: F.L.S | Manufacturer: F.L.S
See On Amazon #3
uxcell PCB Drill Bits 0.1mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 1 Set (10 Pcs)
Asin: B07ZVSSQBQ | Model: a19091500ux0225 | PartNumber: a19091500ux0225
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy, And Effectively Discharge Accumulated Chips.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.The Positioning Ring Design, Can Reduce Installation And Commissioning Time.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 0.1mm; cutting edge length: 1.7mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy, and effectively discharge accumulated chips
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.The positioning ring design, can reduce installation and commissioning time
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
YIYATOO 20pcs 10 15 20 30 3.175mm Carbide PCB Engraving Bits CNC Router Tool 0.1mm
Asin: B017LGA36G | Model: 13 | PartNumber: 13 | Ean: 0757450633035 | UPC: 757450633035
A Power Tool For 2D Sculpture, 3D Sculpture..
These Are Mainly Used For Engraving Machine..
Material: Hard Alloy (Tungsten Steel).
Size: Shank: 3.175Mm, Tool Nose:0.1Mm.
Features
- High-precision tool grinding.
- Size: shank: 3.175mm, tool nose:0.1mm
- A power tool for 2D sculpture, 3D sculpture.
- Material: Hard alloy (tungsten steel)
- These are mainly used for engraving machine.
- See more on Amazon...
Manufacturer: YIYATOO
See On Amazon #5
BQLZR Generic 10 Degree 0.1mm Carbide Engraving Bits CNC Router Tool for PCB Board Pack of 10
Asin: B00EQ1WI2C | Model: N03252 | PartNumber: N03252 | Ean: 0700443093378 | UPC: 700443093378
Made Of Cemented Carbide, High Hardness, Good Heat Resistance, Not Easy To Wear.
The Diameter Of The Shank Is About 3.175Mm, And It Can Be Installed On The Rotary Tool When Combined With The Collet..
Note: You Have To Remember That The Tips Are Very Small, Like Sharps That Are Smaller Than The Tip Of A Needle, So Go Slow Or You'll Break Them..
Multifunctional Tool: It Can Be Used For Engraving, Cutting, Milling, Grooving, Grinding, Finishing, 2D Or 3D Engraving, Surface Processing, Etc..
Processing Use: Suitable For Two-Color Board, Acrylic, Mdf, Pvc, Plane Engraving, Rough Processing.
Features
- Size: Shank diameter is about 3.175mm, tool tip is 0.1mm, angle is 10 degrees
- Processing use: suitable for two-color board, acrylic, MDF, PVC, plane engraving, rough processing
- Made of cemented carbide, high hardness, good heat resistance, not easy to wear
- Multifunctional tool: It can be used for engraving, cutting, milling, grooving, grinding, finishing, 2D or 3D engraving, surface processing, etc.
- The diameter of the shank is about 3.175mm, and it can be installed on the rotary tool when combined with the collet.
- NOTE: You have to remember that the tips are very small, like sharps that are smaller than the tip of a needle, so go slow or you'll break them.
- See more on Amazon...
Brand: BQLZR | Manufacturer: BQLZR
Dimensions: 0.00 x 3.11 x 0.13 inches | Weight: 0.11 pounds
See On Amazon #6
10pcs CNC Router V Bits 20 Degrees 0.1mm Tip, 1/8" Shank 3 Edge Pyramid Engraving End Mill for 3D Milling Cutter PCB Wood PVC Carbon Fiber
Asin: B099QTXPLV | Model: 3D0120 | PartNumber: 3D0120 | Ean: 0728047156220 | UPC: 728047156220
【Suitable Material】Pcb, Mdf, Abs, Pvc, Acrylic, Nylon, Resin, Plastics, Density Board, Wood, Plywood, Hardwood Etc..
【Advantages Application】High Precision Grinding And Concentricity, Reducing The Chance Of Burrs And Deviations. For Carving, Cutting, Engraving, Milling, Slotting, Sculpturing. Ideal For Three-Dimensional Sculpture, Surface Machining, 3D Relief Sculpturing, Etc..
【Carbide Materials】Carbide Has Excellent Properties Such As High Hardness, Wear Resistance, Good Strength And Toughness, Heat Resistance And Corrosion Resistance, Especially Its High Hardness And Wear Resistance.
【1/8” Shank】Tip: 0.1Mm, Overall Length: 28Mm, Cutting Length: 8Mm.
Features
- 3 Edge Pyramid CNC Bits Contains 10 end milling cutters, cutting degrees 20
- 1/8 Shank Tip: 0.1mm, Overall Length: 28mm, Cutting Length: 8mm
- Suitable Material PCB, MDF, ABS, PVC, Acrylic, Nylon, Resin, Plastics, Density board, Wood, Plywood, Hardwood etc.
- Carbide Materials Carbide has excellent properties such as high hardness, wear resistance, good strength and toughness, heat resistance and corrosion resistance, especially its high hardness and wear resistance
- Advantages Application High precision grinding and concentricity, reducing the chance of burrs and deviations. For carving, cutting, engraving, milling, slotting, sculpturing. Ideal for three-dimensional sculpture, surface machining, 3D relief sculpturing, etc.
- See more on Amazon...
Brand: Etoput | Manufacturer: Etoput
See On Amazon #7
HUHAO 10PCS Spiral Engraving CNC Router Bit Milling Cutter Tools Up Cut Pyramid 2 Flute 30 Degree 0.1mm Tip Diameter 1/8 Shank
Asin: B07D371MWF | Ean: 6165439608600
Majority Of Engraving , Acrylic, Pvc, Nylon, Resin, Wood, Plywood, Hardwood, Fibre Glass, Marble, Etc.
For Engraving Art, Engraved Rings, Engraved Flask, Engraved Dog Tags, Engraved Gifts, Engraved Necklace, Engraved Bracelet, Gavel Engraved, Engraved Cufflinks, Engraved Plaque Etc..
Designed For Milling And Engraving Machines, Especially For Cnc And Pcb Machinery..
Engraving Cnc Router Bit Set,2 Flute, 2D 3D Sculpture,Spiral,Engraving Tools,Wood Carving,1/8 Inch Shank,Woodworking,V-Bits,30 Degree,Carbide Cnc Engraving Bits,3.175Mm.
Features
- Material: Tungsten steel, Degree: 30 ,Cutting edge diameter: 0.1mm
- engraving CNC router bit set,2 flute, 2D 3D sculpture,spiral,engraving tools,wood carving,1/8 inch shank,woodworking,V-bits,30 Degree,carbide CNC engraving bits,3.175mm
- Majority of engraving , Acrylic, PVC, Nylon, Resin, Wood, Plywood, Hardwood, Fibre glass, marble, etc
- Designed for milling and engraving machines, especially for CNC and PCB machinery.
- For engraving art, engraved rings, engraved flask, engraved dog tags, engraved gifts, engraved necklace, engraved bracelet, gavel engraved, engraved cufflinks, engraved plaque etc.
- See more on Amazon...
Brand: HUHAO | Manufacturer: HUHAO
See On Amazon #8
uxcell 20Pcs 0.6mm,1mm Carbide End Mill Engraving Milling Cutter CNC Router Bits for PCB Machine, 1/8" Shank
Asin: B0C558BNXR
Features: High Hardness, High Wear Resistance, High Strength. Have Sufficient Bending Strength And Wear Resistance..
Application: Can Engrave Pcb, Cnc, Circuit Boards, Metal, Plastics, Wood, Smt, Fiber Glass, Carbon Board. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Characteristics: Sharp Cutting Edge, Milling, Hole And Plate Edge, Surface Clean, Neat, No Glitches. The Longer The Length Of The Tool Clamped By The Chuck, The Better..
Material: Use Of Ultra-Fine Grain Carbide Material With Good Milling And Cutting Performance, Ensure High Work Efficiency..
Features
- STANDARD: Cutting Edge Diameter: 0.6mm / 0.024", 1.0mm / 0.063"; Shank Diameter: 3.175mm / 1/8"; Cutting Edge Length: 5mm / 0.2", 7mm / 0.28"; Overall Length: 38mm / 1.5"
- MATERIAL: Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency.
- FEATURES: High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
- CHARACTERISTICS: Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches. The longer the length of the tool clamped by the chuck, the better.
- APPLICATION: Can engrave PCB, CNC, Circuit boards, Metal, Plastics, Wood, SMT, Fiber glass, Carbon board. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell Wood Engraving Bit Solid Carbide 3.175mm 1/8" Shank, 20 Degree 0.1mm Tip CNC Router Tool for Acrylic PVC MDF PCB Wood Carving, 10pcs
Asin: B098WW35TJ | Model: a21042400ux0035 | PartNumber: a21042400ux0035
Carbide Materials: Made Of Solid Carbide (Tungsten Steel), High Hardness, Wear Resistance, Good Toughness And Heat Resistance. Provide Good Cutting Strength And Drilling Effect. Fast Engrave And Cut To Improve Efficiency..
Notices: Need To Increase The Speed And Reduce The Feed Rate To Avoid Tool Breakage, When Engraving Harder Materials..
Application Materials: Pcb, Mdf, Abs, Pvc, Wood, Plywood, Hardwood, Color Plates, Acrylic, Nylon, Plastic, Hardwood, Mdf, Copper, Aluminum Etc...
Versatile Tool: Can Be Used For Carving, Cutting, Engraving, Milling, Slotting, Grinding, Finishing, 2D Or 3D Sculpturing, Surface Machining, Etc. The Deep Angle And Sharp Point Allows For Precise Details..
Features
- Carving and Engraving Bit: Shank diameter: 3.175mm / 1/8"; cutting angle: 20 degree; tip size: 0.1mm / 0.004"; total length: 28mm / 1.1". Sharp edge provides smooth cutting, no glitches. Fits most small rotary tools and grinders.
- Versatile Tool: Can be used for carving, cutting, engraving, milling, slotting, grinding, finishing, 2D or 3D sculpturing, surface machining, etc. The deep angle and sharp point allows for precise details.
- Carbide Materials: Made of solid carbide (tungsten steel), high hardness, wear resistance, good toughness and heat resistance. Provide good cutting strength and drilling effect. Fast engrave and cut to improve efficiency.
- Application Materials: PCB, MDF, ABS, PVC, wood, plywood, hardwood, color plates, acrylic, nylon, plastic, hardwood, MDF, copper, aluminum etc..
- Notices: Need to increase the speed and reduce the feed rate to avoid tool breakage, when engraving harder materials.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
Nxtop 10Pcs 1.9mm Carbide End Mill Engraving Milling Cutter CNC Router Bits for PCB Machine, 1/8" Shank
Asin: B07VD4KYC2 | Model: XD1 | PartNumber: XD1 | Ean: 0745672480506 | UPC: 745672480506
Features: High Hardness, High Wear Resistance, High Strength. Have Sufficient Bending Strength And Wear Resistance..
Application: Can Engrave Pcb, Cnc, Circuit Boards, Metal, Plastics, Wood, Smt, Fiber Glass, Carbon And Environmental Board..
Characteristics: Sharp Cutting Edge, Milling, Hole And Plate Edge, Surface Clean, Neat, No Glitches..
Material: Use Of Ultra-Fine Grain Carbide Material With Good Milling And Cutting Performance, Ensure High Work Efficiency..
Features
- Standrd: Cutting edge diameter: 1.9mm / 0.075"; Shank diameter: 3.175mm / 1/8"; Cutting edge length: 10mm / 0.39"
- Material: Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency.
- Features: High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
- Characteristics: Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.
- Application: Can engrave PCB, CNC, Circuit boards, Metal, Plastics, Wood, SMT, Fiber glass, Carbon and environmental board.
- See more on Amazon...
Brand: Nxtop | Manufacturer: Nxtop
See On Amazon #11
Nxtop 10Pcs 0.8mm Carbide End Mill Engraving Milling Cutter CNC Router Bits for PCB Machine, 1/8" Shank
Asin: B07VF88KGS | Ean: 0745672480568 | UPC: 745672480568
Features: High Hardness, High Wear Resistance, High Strength. Have Sufficient Bending Strength And Wear Resistance..
Application: Can Engrave Pcb, Cnc, Circuit Boards, Metal, Plastics, Wood, Smt, Fiber Glass, Carbon And Environmental Board..
Characteristics: Sharp Cutting Edge, Milling, Hole And Plate Edge, Surface Clean, Neat, No Glitches..
Material: Use Of Ultra-Fine Grain Carbide Material With Good Milling And Cutting Performance, Ensure High Work Efficiency..
Features
- Standrd: Cutting edge diameter: 0.8mm / 0.031"; Shank diameter: 3.175mm / 1/8"; Cutting edge length: 5.5mm / 0.22"
- Material: Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency.
- Features: High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
- Characteristics: Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.
- Application: Can engrave PCB, CNC, Circuit boards, Metal, Plastics, Wood, SMT, Fiber glass, Carbon and environmental board.
- See more on Amazon...
Brand: Nxtop | Manufacturer: Nxtop
See On Amazon #12
BQLZR 3.175mm Drill Bits Engraving Bits CNC PCB Machinery 0.6-1.5mm Pack of 10
Asin: B00H8N2YCY | Model: N03059 | PartNumber: N03059 | Ean: 0701851068293, 0700443103800 | UPC: 701851068293, 700443103800
Brand: BQLZR | Manufacturer: SZLYWS LTD
Weight: 0.11 pounds
See On Amazon #13
HUHAO 20 Degree Tungsten Steel Carbide CNC Router Cutter Titanium Coated Cutting Tool 0.2mm Tip V-shape Engraver 1/8 Shank 10PCS
Asin: B07RYLYXSB | Ean: 8011735411629
Applicable Materials: Acrylic, Abs, Pvc, Double-Color Board, Thin Copper/Steel/Aluminum And Other Precision Metal Parts Processing.
Precision Equipment, It Is Sharper And More Durable Compared With The Normal Engraving Tools Coated With Tiain/Tin, Improve The Speed And Feed Rate Of The Tool, Improve The Surface Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment And Long Life.
Multi-Angle Selection, Flat Bottom Design, Mirror Finish, Titanium Coated Wear.
Cnc Router Bit 1/8 Inch Shank, Carbide, Tungsten Steel, V Bit, Cnc £¬Machine Cutting, Titanium Coated, V Groove Engraving Router Bits, Wood Carving Tools, Woodworking.
Features
- Material: Carbide; Coated
- CNC router bit 1/8 inch shank, Carbide, Tungsten steel, V bit, CNC machine cutting, Titanium coated, V Groove Engraving router bits, Wood carving tools, Woodworking
- Applicable materials: Acrylic, ABS, PVC, Double-Color Board, Thin Copper/steel/Aluminum and other precision metal parts processing
- Multi-angle selection, flat bottom design, mirror finish, titanium coated wear
- precision equipment, it is sharper and more durable compared with the Normal Engraving tools Coated with TiAIN/TIN, Improve the speed and feed rate of the tool, improve the surface wear resistance, high strength, resistance to bending, anti-impairment and long life
- See more on Amazon...
Brand: HUHAO | Manufacturer: HUHAO
See On Amazon #14
HELION Tools Carbide Bull End Mill Metric, 1mm Dia x 0.1mm Corner Radius x 1.2mm LOC x 4mm Shank, 16mm Neck, 50mm Overall Length, 2 Flutes, TiAlN Coated, Rotary Professional CNC Carving Cutter Bits
Asin: B0C8MF2C6L | Ean: 8445580031495
✔️ Solid Carbide - The Material Is European Origin Ultra-Fine Grain Carbide. We Use The Highest Quality Tungsten Carbide Powders And Adjust The Ratio Of Tungsten Carbide And Cobalt To Meet The Ideal Hardness..
✔️ Recommended Uses – First Choice For Full Slot Machining, Side Milling And Interpolation As A Square Nose Endmill..
✔️ Strong Teeth With Double Relief Angle - This End Mill Achieves Excellent Production Rates Thanks To The Increased Hardness Of The Teeth. Length Of Cut (Loc) And Overall Length (Oal) As Described..
✔️ Good For Hard Materials - Special For Working With Aluminum, Titanium, Inconel, Stainless Steel, Super Alloys And Cast Iron..
Features
- HIGH PERFORMANCE - High precision and performance work in roughing or finishing operations in any machining process: grooving, contouring, and even more operations.
- GOOD FOR HARD MATERIALS - Special for working with Aluminum, Titanium, Inconel, Stainless Steel, Super Alloys and Cast Iron.
- SOLID CARBIDE - The material is European origin ultra-fine grain carbide. We use the highest quality tungsten carbide powders and adjust the ratio of tungsten carbide and cobalt to meet the ideal hardness.
- STRONG TEETH WITH DOUBLE RELIEF ANGLE - This end mill achieves excellent production rates thanks to the increased hardness of the teeth. Length of cut (LOC) and Overall length (OAL) as described.
- RECOMMENDED USES First choice for Full Slot Machining, Side Milling and Interpolation as a square nose endmill.
- See more on Amazon...
Brand: HELION | Manufacturer: HELION
Dimensions: 0.10 x 1.97 x 0.16 inches
See On Amazon #15
LIPOVOLT 10PCS Carbide PCB Board 0.1mm 30 Degree Engraving Bits CNC Router Tool V-Shape
Asin: B071RBCYYV | Ean: 0700416549789 | UPC: 700416549789
Brand: LIPOVOLT | Manufacturer: lipovolt
See On Amazon #16
5pcs 0.1mm 15 degree Carbide CNC Router Triangular Pyramid Engraving Bits
Asin: B00M6Q8J4U | Model: 3J3x1501x5 | PartNumber: 3J3x1501x5 | Ean: 0702658165635 | UPC: 702658165635
Cutting Edge Diameter: 0.1Mm.
Shank Diameter: 3.175Mm.
Brand: Generic | Manufacturer: SZZJ Ltd
See On Amazon #17
uxcell 20Pcs 0.6mm 0.8mm Carbide End Mill Engraving Milling Cutter CNC Router Bits for PCB Machine, 1/8" Shank
Asin: B0BGDZ9YPV
Features: High Hardness, High Wear Resistance, High Strength. Have Sufficient Bending Strength And Wear Resistance..
Application: Can Engrave Pcb, Cnc, Circuit Boards, Metal, Plastics, Wood, Smt, Fiber Glass, Carbon Board. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Characteristics: Sharp Cutting Edge, Milling, Hole And Plate Edge, Surface Clean, Neat, No Glitches. The Longer The Length Of The Tool Clamped By The Chuck, The Better..
Material: Use Of Ultra-Fine Grain Carbide Material With Good Milling And Cutting Performance, Ensure High Work Efficiency..
Features
- STANDARD: Cutting edge diameter: 0.6mm / 0.024"; 0.8mm / 0.032"; Shank diameter: 3.175mm / 1/8"; Cutting edge length: 5mm / 0.2"
- MATERIAL: Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency.
- FEATURES: High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
- CHARACTERISTICS: Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches. The longer the length of the tool clamped by the chuck, the better.
- APPLICATION: Can engrave PCB, CNC, Circuit boards, Metal, Plastics, Wood, SMT, Fiber glass, Carbon board. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell Wood Engraving Router Bit, 1/8" 3.175mm Shank 0.1mm Tip 15 Degree Solid Carbide CNC 3D Milling Cutter, for Carving Acrylic PVC MDF Plastic, 4pcs
Asin: B09SYZ6R9F | Model: a21123100ux0581 | PartNumber: a21123100ux0581
Carbide Tool: Made Of Solid Carbide (Tungsten Steel), High Hardness, Wear Resistance, Good Toughness And Heat Resistance. Provide Good Cutting Strength And Drilling Effect. Fast Engrave And Cut To Improve Efficiency..
Tips: Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life And Obtain Better Processing Accuracy And Performance..
Easy To Use: Use On Engraving Machines. Increase The Speed And Reduce The Feed Rate To Avoid Tool Breakage When Engraving Harder Materials. The Longer The Length Of The Tool Clamped By The Chuck, The Better..
Wide Applications: Can Be Used For Carving, Cutting, Milling, Slotting, 2D Or 3D Sculpturing, Surface Machining, Etc. Suitable For Engraving Mdf, Abs, Pvc, Wood, Plywood, Hardwood, Double Color Boards, Acrylic, Nylon, Plastic, Etc...
Features
- Engraving Router Bit: Shank diameter: 3.175mm / 1/8"; tip size: 0.1mm / 0.004"; cutting angle: 15 degree. Sharp edge provides smooth cutting, and reduces cutting force. Fits most small rotary tools and grinders.
- Wide Applications: Can be used for carving, cutting, milling, slotting, 2D or 3D sculpturing, surface machining, etc. Suitable for engraving MDF, ABS, PVC, wood, plywood, hardwood, double color boards, acrylic, nylon, plastic, etc..
- Carbide Tool: Made of solid carbide (tungsten steel), high hardness, wear resistance, good toughness and heat resistance. Provide good cutting strength and drilling effect. Fast engrave and cut to improve efficiency.
- Easy to Use: Use on engraving machines. Increase the speed and reduce the feed rate to avoid tool breakage when engraving harder materials. The longer the length of the tool clamped by the chuck, the better.
- Tips: Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
Tungsten Carbide End Milling Cutter, 10pcs, for CNC PCB Engraving Machine, Suitable for PCB Mould Plastic Copper Stainless Steel (0.5mm)
Asin: B0D2P2X8JP | Model: AILOOCEDIk36m08thgv-01 | PartNumber: AILOOCEDIk36m08thgv-01
[Clean & Neat Cuts] Milling Groove, Hole, And Plate Edges Have A Clean With No Burrs, Ensuring Top-Notch Results..
[Efficient Performance] Using Ultra-Fine Grained Carbide Material, It Ensures Good Milling And Cutting Performance For High Work Efficiency..
[Versatile Application] Suitable For Processing Pcb, Molds, Plastic, Copper, Stainless Steel, And Other Hardware, Making It A Versatile Tool For Various Projects..
[Value Pack] Comes With 10 Milling Cutters In A Box, Providing Great Value And Convenience For Your Machining Needs..
Features
- [Premium Quality] A box of tungsten carbide milling cutter, perfect replacement for your cnc machinery. made of high-quality tungsten steel for a precise, easy cutting experience.
- [Value Pack] Comes with 10 milling cutters in a box, providing great value and convenience for your machining needs.
- [Clean & Neat Cuts] Milling groove, hole, and plate edges have a clean with no burrs, ensuring top-notch results.
- [Versatile Application] Suitable for processing pcb, molds, plastic, copper, stainless steel, and other hardware, making it a versatile tool for various projects.
- [Efficient Performance] Using ultra-fine grained carbide material, it ensures good milling and cutting performance for high work efficiency.
- See more on Amazon...
Brand: AILOOCEDI | Manufacturer: AILOOCEDI
See On Amazon
Looking For Something Else?
Search