Drill America - DWDDL12X11/32 11/32" x 12" High Speed Steel Extra Long Drill Bit, DWDDL Series
Asin: B00FXHHWTC | Model: DWDDL12X11/32 | PartNumber: DWDDL12X11/32 | Ean: 0887861061001 | UPC: 887861061001
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
For General Purpose Drilling In Applications Where Extra Length For Reach Is Required, Designed To Perform In A Broad Range Of Materials In The Iron And Steel Families.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon Similar To Drill America DWDDL12X11 32 11
#1
Drill America - DMOD11/32 11/32" Solid Carbide Drill Bit, DMOD Series
Asin: B00B4VJ65E | Model: DMOD11/32 | PartNumber: DMOD11/32 | Ean: 0887861047791 | UPC: 887861047791
Used On Materials Such As Cast Iron, Non-Ferrous Alloys, High Silicon Aluminum, Copper, Plastics, Bronze, Hard Rubber, Plexiglass, And Other Similar Materials.
Must Be Used With A Rigid Tool-Holding Systems..
Solid Carbide Tools Offer Long Tool Life And Faster Cutting Speeds Than Other Substrates, But Are More Brittle.
Can Be Used In High Temperature Drilling Applications.
Features
- Designed for drilling abrasive materials when drilling accuracy must be maintained
- Can be used in high temperature drilling applications
- Used on materials such as cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, bronze, hard rubber, plexiglass, and other similar materials
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle
- Must be used with a rigid tool-holding systems.
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #2
Drill America KFD11/32P6 11/32" High Speed Steel Black & Gold KFD Split Point Drill Bit (Pack of 6), KFD Series
Asin: B00FXN1W4W | Model: KFD11/32P6 | PartNumber: KFD11/32P6 | Ean: 0887861206150 | UPC: 887861206150
135° Split Point Tip Prevents Drill From "Walking".
Black And Gold Drills Are Manufactured From Premium Grade High Speed Steel.
Combination Of Hardness And Toughness For Wear Resistance.
For Use In Wood, Metal, Stainless And Other Hard Metal Drilling.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- For use in wood, metal, stainless and other hard metal drilling
- 135 split point tip prevents drill from walking
- Combination of hardness and toughness for wear resistance
- Black and gold drills are manufactured from premium grade high speed steel
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #3
BOSCH TI2149 1-Piece 11/32 In. x 4-3/4 In. Titanium Nitride Coated Metal Drill Bit with 3/8 In. Reduced Shank for Applications in Heavy-Gauge Carbon Steels, Light Gauge Metal, Hardwood
Asin: B000HS1F6S | Model: TI2149 | PartNumber: TI2149 | Ean: 0000346332995 | UPC: 000346332995
Balanced Double Flute Eliminates Chatter And Vibration.
Drills Clean, Accurate Holes In These Thin Materials (Up To 1/8 In.): Sheet Metal, Ducts, Steel, Copper, Brass, Aluminum, Plastic, Plexiglass, Wood, Veneers, Vinyl Siding, Plasterboard, Pvc, Stainless Steel And Cast Iron.
Titanium Reduces Heat For Longer Life.
Self-Starting Point Starts On Contact.
Features
- Super-hard titanium coating lasts up to six times longer than high-speed steel
- Self-starting point starts on contact
- Balanced double flute eliminates chatter and vibration
- Titanium reduces heat for longer life
- Drills clean, accurate holes in these thin materials (up to 1/8 In.): sheet metal, ducts, steel, copper, brass, aluminum, plastic, Plexiglass, wood, veneers, vinyl siding, plasterboard, PVC, stainless steel and cast iron
- See more on Amazon...
Brand: BOSCH | Manufacturer: Bosch
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.10 Pounds
Warranty: No
See On Amazon #4
Drill America - GLBCOX1211/32 11/32" x 12" Cobalt Aircraft Extension Drill Bit, GLBCO Series
Asin: B00B2QYMYG | Model: GLBCOX1211/32 | PartNumber: GLBCOX1211/32 | Ean: 0887861046367 | UPC: 887861046367
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
12" Overall Length For Drilling Where Extra Length For Reach Is Required.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
135° Split Point Tip Prevents Drill From Walking.
Features
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135 split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- 12 overall length for drilling where extra length for reach is required
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 1.00 pounds
See On Amazon #5
Drill America 11/32" High Speed Steel Reduced Shank Drill Bit with 1/4" Shank, DWDRSD Series
Asin: B00FXI9ICK | Model: DWDRSD11/32 | PartNumber: DWDRSD11/32 | Ean: 0887861033572 | UPC: 887861033572
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Drilling In Low And Medium Tensile Strength Materials.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for drilling in low and medium tensile strength materials
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 1.40 x 6.30 x 1.50 inches | Weight: 0.90 Pounds
See On Amazon #6
Drill America DWDDL8X11/32 11/32" x 8" High Speed Steel Extra Long Drill Bit, DWDDL Series (Pack of 2)
Asin: B0CDNMVM9J | Model: DWDDL8X11/32 | PartNumber: DWDDL8X11/32
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
For General Purpose Drilling In Applications Where Extra Length For Reach Is Required, Designed To Perform In A Broad Range Of Materials In The Iron And Steel Families.
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
High-Speed Steel Tools Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- The information below is per-pack only
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #7
CHICAGO-LATROBE Extra Long Drill,11/32",HSS
Asin: B091JGC3WQ | Model: 40580 | PartNumber: 40580 | Ean: 0662355405802 | UPC: 662355405802
Brand: Chicago-Latrobe | Manufacturer: CHICAGO-LATROBE
See On Amazon #8
11/32 HSS Taper Length Drill Bit, Michigan Drill Series 400 (pack of 3)
Asin: B07C843W8W | Ean: 0728012149202 | UPC: 728012149202
Brand: MICHIGAN DRILL | Manufacturer: Michigan Drill
See On Amazon #9
Drill America 11/32" Carbide Spade Drill Bit, DMO Series
Asin: B01BKTS61Y | Model: DMO11/32SPADE | PartNumber: DMO11/32SPADE | Ean: 0887861122382 | UPC: 887861122382
Item Package Dimension: 6.0" L X 3.0" W X 2.0" H.
Item Package Weight: 1.0 Lb.
Model Number: Dmo11/32Spade.
Features
- Country Of Origin: United States
- Model Number: DMO11/32SPADE
- Item Package Dimension: 6.0 L x 3.0 W x 2.0 H
- Item Package Weight: 1.0 lb
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #10
Drill America #32 High Speed Steel Polished Drill Bit (Pack of 12), D/AP Series
Asin: B00FX8SKTC | Model: D/AP32P12 | PartNumber: D/AP32P12 | Ean: 0887861188883 | UPC: 887861188883
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Production, Maintenance Or Portable Drilling Jobs.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for production, maintenance or portable drilling jobs
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches | Weight: 1.00 pounds
See On Amazon
Looking For Something Else?
Search