SparkFun Weather Shield
Asin: B00H8OI1RU | Ean: 0799430211741 | UPC: 799430211741
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Light Sensor - Als-Pt19.
Works With Arduino And Compatible Boards.
On Board 3.3V Regulator.
Barometric Pressure - Mpl3115a2.
Features
- Humidity/Temperature Sensor - Si7021
- Barometric Pressure - MPL3115A2
- Light Sensor - ALS-PT19
- On board 3.3V regulator
- Works with Arduino and compatible boards
- See more on Amazon...
Brand: SparkFun | Manufacturer: Sparkfun
Dimensions: 0.13 x 4.00 x 3.00 inches | Weight: 0.10 pounds
See On Amazon Similar To SparkFun Weather Shield
#1
Netatmo Weather Station Shield |Protective Housing for The Smart Weather Station | Lets Only The Necessary Air in | Includes 3-in1 Bracket for Easy Installation | Model NRSWW
Asin: B09ZFJFMBB | Model: NRS-WW | PartNumber: NRS-WW | Ean: 0828831840899, 3700730504768 | UPC: 828831840899
3-In-1 Bracket: The Weather Station Shield Allows The External Module To Be Attached To A Post, Wall Or To The Netatmo Wall Mount..
Netatmo: Same Home Just Smarter.
Perfectly Compatible: The Shield Is Designed By Netatmo: Practical Size With Optimal Attachment..
Easy Installation: The Weather Station Shield Is Pre-Assembled. It Only Needs To Be Attached To The Post Or Screwed With The Enclosed Accessories..
Features
- Designed by Netatmo to protect your outdoor module (module is sold separately) from wind and weather and lets only the necessary air in to receive and record the most precise measurements so you will be able to observe standardized temperature values that are as close to the measurements of the weather institutes as possible. This is an accessory to the Netatmo Weather Station.
- Easy installation: the weather station shield is pre-assembled. It only needs to be attached to the post or screwed with the enclosed accessories.
- 3-in-1 bracket: the weather station shield allows the external module to be attached to a post, wall or to the Netatmo wall mount.
- Perfectly compatible: the shield is designed by Netatmo: practical size with optimal attachment.
- Netatmo: Same home just smarter
- See more on Amazon...
Brand: Netatmo | Manufacturer: NETATMO LLC
Dimensions: 4.96 x 4.72 x 3.39 inches | Weight: 0.36 Pounds
Warranty: 2 year manufacturer
See On Amazon #2
Weather Meter Kit - Station Includes Analog sensors Wind Vane Cup Anemometer Tipping Bucket rain Gauge RJ11 terminated Cables
Asin: B084DBXMPX | Model: 15901 | PartNumber: 15901
All Of The Sensors In The Weather Meter Kit Are Passive Components. This Means You Will Need A Voltage Source In Order To Measure Anything With Them..
Stand: Two-Part Mounting Mast, Rain Gauge Mounting Arm, Wind Meter Mounting Bar, 2X Mounting Clamps And 4X Zip Ties..
Sensors Include Wind Vane, Cup Anemometer, Tipping Bucket Rain Gauge. Rj11 Terminated Cables..
It Uses Sealed Magnetic Reed Switches And Magnets So You'll Need To Source A Voltage To Take Any Measurements..
Features
- Kit represents the three core components of weather measurement: wind speed, wind direction and rainfall.
- It uses sealed magnetic reed switches and magnets so you'll need to source a voltage to take any measurements.
- All of the sensors in the weather meter kit are passive components. This means you will need a voltage source in order to measure anything with them.
- Sensors include Wind vane, Cup anemometer, Tipping bucket rain gauge. RJ11 terminated cables.
- Stand: Two-part mounting mast, Rain gauge mounting arm, Wind meter mounting bar, 2x Mounting clamps and 4x Zip ties.
- See more on Amazon...
Brand: SparkFun | Manufacturer: Fine Offset Electronics Co., Ltd.
Dimensions: 5.71 x 14.96 x 16.14 inches
See On Amazon #3
SparkFun High Precision Temperature Sensor - TMP117 (Qwiic) Programmable Temperature Alert Limits Operating Voltage 1.8V to 5.5V 16-bit Resolution NIST traceability Maximum Range from -55 C to 150 C
Asin: B081QK731D | Model: SEN-15805 | PartNumber: SEN-15805 | Ean: 0845156009985 | UPC: 845156009985
I2c Interface (Qwiic Enabled) With Four Selectable Addresses 0X48 (Default), 0X49, 0X4a, 0X4b.
Operating Voltage: Sensor Operates From 1.8V To 5.5V. If Use The Qwiic Cable 3.3V. Power Consumption 3.5Μa (1-Hz Conversion Cycle) 150Na (Shutdown Current).
Has A Very Low Power Consumption Rate Which Minimizes The Impact Of Self-Heating On Measurement Accuracy.
Has A 16-Bit Resolution Of .0078°C. Programmable Operating Modes Continuous, One-Shot, And Shutdown. Nist Traceability.
Features
- TMP117AIDRVT High Precision temperature sensor with Programmable temperature alert limits
- Has a 16-bit resolution of .0078 C. Programmable operating modes Continuous, one-shot, and shutdown. NIST traceability
- i2c interface (QWIIC Enabled) with Four selectable addresses 0x48 (default), 0x49, 0x4A, 0x4B
- Has a very low power consumption rate which minimizes the impact of self-heating on measurement accuracy
- Operating Voltage: Sensor operates from 1.8V to 5.5V. If use the Qwiic cable 3.3V. Power consumption 3.5 A (1-Hz conversion cycle) 150nA (shutdown current)
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun Electronics
Dimensions: 1.00 x 3.00 x 2.00 inches
See On Amazon #4
Sparkfun Spectrum Shield
Asin: B00X0K30I6 | Model: DEV-13116 | PartNumber: DEV-13116 | Ean: 0799430213271, 7431904519573 | UPC: 799430213271
Collaboration With Ben Moyes Of Bliptronics.
Headers Required (Not Included).
Arduino Shield.
Features
- MSGEQ7 graphic equalizer display filter
- Arduino Shield
- collaboration with Ben Moyes of Bliptronics
- Headers required (not included)
- See more on Amazon...
Brand: SparkFun | Manufacturer: Sparkfun
Dimensions: 0.30 x 2.50 x 2.20 inches | Weight: 0.04 pounds
See On Amazon #5
SparkFun GPS Breakout - Chip Antenna, SAM-M8Q (Qwiic) 72-Channel GNSS Receiver from GPS, GLONASS, and Galileo Constellations - hot Lock in Seconds
Asin: B082MP55CV | Model: GPS-15210 | PartNumber: GPS-15210 | Ean: 0845156009503 | UPC: 845156009503
3.3V Vcc And I/O. Current Consumption: ~29Ma Tracking Gps+Glonass.
Supports Nmea, Ubx, And Rtcm Protocols Over Uart Or I2c Interfaces.
Software Configurable: Geofencing, Odometer, Spoofing Detection, External Interrupt, Pin Control, Low Power Mode, And Many Others!.
Max Altitude: 50,000M. Max G: ≤4. Max Velocity: 500M/S. Velocity Accuracy: 0.05M/S. Heading Accuracy: 0.3 Degrees. Time Pulse Accuracy: 30Ns.
Features
- 72-Channel GNSS Receiver. 2.5m Horizontal Accuracy. 18Hz Max Update Rate. Time-To-First-Fix:Cold: 26s and Hot: 1s
- Max Altitude: 50,000m. Max G: 4. Max Velocity: 500m/s. Velocity Accuracy: 0.05m/s. Heading Accuracy: 0.3 degrees. Time Pulse Accuracy: 30ns
- 3.3V VCC and I/O. Current Consumption: ~29mA Tracking GPS+GLONASS
- Software Configurable: Geofencing, Odometer, Spoofing Detection, External Interrupt, Pin Control, Low Power Mode, and Many others!
- Supports NMEA, UBX, and RTCM protocols over UART or I2C interfaces
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun Electronics
Dimensions: 0.35 x 1.65 x 1.65 inches
See On Amazon #6
SparkFun Atmospheric Sensor Breakout - BME280 (Qwiic) Measure barometric Pressure, Humidity, and Temperature Readings 3.3V SPI Interface, Operating Voltage 3.3V
Asin: B07X4B488D | Model: SEN-15440 | PartNumber: SEN-15440 | Ean: 0845156009787 | UPC: 845156009787
The Bme280 Breakout Has Been Designed To Be Used In Indoor/Outdoor Navigation, Weather Forecasting, Home Automation, And Even Personal Health And Wellness Monitoring. Utilizing Our Handy Qwiic System, No Soldering Is Required To Connect It To The Rest Of Your System..
The Sparkfun Qwiic Connect System Is An Ecosystem Of I2c Sensors, Actuators, Shields And Cables That Make Prototyping Faster And Less Prone To Error. All Qwiic-Enabled Boards Use A Common 1Mm Pitch, 4-Pin Jst Connector..
The On-Board Bme280 Sensor Measures Atmospheric Pressure From 30Kpa To 110Kpa As Well As Relative Humidity And Temperature. The Breakout Provides A 3.3V Spi Interface, A 5V Tolerant I2c Interface (With Pull-Up Resistors To 3.3V), Can Be Configured To Take Measurements With Less Than 1Ma Of Current Draw..
The Bme280 Features: Operating Voltage: 1.71V-3.6V (Default On Qwiic System: 3.3V) I2c & Spi Interface. Temperature Range: Full Accuracy: 0°C-65°C (32°F-149°F) Operational: -40°C-85°C (-40°F-185°F) Humidity Range: 0-100% Rh. Pressure Range: 300-1100 Hpa (30,000-110,000 Pa Or Approx. 4.35-15.95 Psi) I2c Address: 0X77 (Default) Or 0X76.
Features
- The SparkFun BME280 Atmospheric Sensor Breakout is an easy way to measure barometric pressure, humidity, and temperature readings, without taking up space.
- The BME280 Features: Operating Voltage: 1.71V-3.6V (Default on Qwiic System: 3.3V) I2C & SPI Interface. Temperature Range: Full Accuracy: 0 C-65 C (32 F-149 F) Operational: -40 C-85 C (-40 F-185 F) Humidity Range: 0-100% RH. Pressure Range: 300-1100 hPa (30,000-110,000 Pa or approx. 4.35-15.95 PSI) I2C Address: 0x77 (Default) or 0x76
- The BME280 Breakout has been designed to be used in indoor/outdoor navigation, weather forecasting, home automation, and even personal health and wellness monitoring. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system.
- The on-board BME280 sensor measures atmospheric pressure from 30kPa to 110kPa as well as relative humidity and temperature. The breakout provides a 3.3V SPI interface, a 5V tolerant I2C interface (with pull-up resistors to 3.3V), can be configured to take measurements with less than 1mA of current draw.
- The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector.
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #7
SparkFun Qwiic Shield Compatible with Teensy (not Included) - Extended - 4.1, 3.6, or 3.5 Footprint Compatible - 3.3V - with headers
Asin: B08VRNVXB1 | Model: DEV-17156 | PartNumber: DEV-17156 | Ean: 0845156010882 | UPC: 845156010882
This Shield Connects The I2c Bus (Gnd, 3.3V, Sda, And Scl) On Your Teensy To Four Sparkfun Qwiic Connectors (Two Horizontally And Two Vertically Mounted). The Qwiic Ecosystem Allows For Easy Daisy Chaining So, As Long As Your Devices Are On Different Addresses, You Can Connect As Many Qwiic Devices As You'd Like..
Features: Teensy 4.1, 3.6, Or 3.5 Footprint Compatible, 4X Qwiic Connection Ports,"Prog" Button W/ Satisfying Tactile Feedback, I2c Jumper, 3.3V And Gnd Buses.
Includes: Sparkfun Qwiic Shield For Teensy - Extended, 2X 24-Pin Headers, 1X 5 Pin Header.
This Shield Is Sized To Work With The Footprint Of Teensy 4.1, Teensy 3.6, And Teensy 3.5..
Features
- The SparkFun Extended Qwiic Shield compatible with Teensy provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Teensy boards.
- This shield is sized to work with the footprint of Teensy 4.1, Teensy 3.6, and Teensy 3.5.
- This shield connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Teensy to four SparkFun Qwiic connectors (two horizontally and two vertically mounted). The Qwiic ecosystem allows for easy daisy chaining so, as long as your devices are on different addresses, you can connect as many Qwiic devices as you'd like.
- Includes: SparkFun Qwiic Shield for Teensy - Extended, 2x 24-pin headers, 1x 5 pin header
- Features: Teensy 4.1, 3.6, or 3.5 Footprint Compatible, 4x Qwiic Connection Ports,PROG Button w/ satisfying tactile feedback, I2C Jumper, 3.3V and GND Buses
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun Electronics
Dimensions: 0.24 x 3.54 x 2.36 inches | Weight: 0.02 Pounds
See On Amazon #8
SparkFun Weather Shield utilizes The Si7021 Humidity/Temperature Sensor, The MPL3115A2 barometric Pressure Sensor and The ALS-PT19 Light Sensor
Asin: B06XQ1M8Z3 | Model: DEV-13956 | PartNumber: DEV-13956 | Ean: 0845156007844 | UPC: 845156007844
This Weather Shield Features: Humidity/Temperature Sensor --- Si7021. Barometric Pressure --- Mpl3115a2. Light Sensor --- Als-Pt19.
Note: The Weather Shield Comes As A Stand-Alone Board. Headers, Connectors And Additional Sensors Will Need To Be Purchased Separately..
Each Shield Comes With Two Unpopulated Rj11 Connector Spaces (For Optional Hookup Of Rain And Wind Sensors) And A 6-Pin Gps Connector (For Optional Hookup Of A Gp-735 Gps Module). Finally, Each Weather Shield Can Operate From 3.3V Up To 16V And Has Built-In Voltage Regulators And Signal Translators..
The Weather Shield Utilizes The Si7021 Humidity/Temperature Sensor, The Mpl3115a2 Barometric Pressure Sensor And The Als-Pt19 Light Sensor. The Shield Relies On The Si7021 And Mpl3115a2 Libraries..
Features
- The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity and temperature.
- The Weather Shield utilizes the Si7021 humidity/temperature sensor, the MPL3115A2 barometric pressure sensor and the ALS-PT19 light sensor. The shield relies on the Si7021 and MPL3115A2 libraries.
- This Weather Shield Features: Humidity/Temperature Sensor --- Si7021. Barometric Pressure --- MPL3115A2. Light Sensor --- ALS-PT19
- Each shield comes with two unpopulated RJ11 connector spaces (for optional hookup of rain and wind sensors) and a 6-pin GPS connector (for optional hookup of a GP-735 GPS module). Finally, each Weather Shield can operate from 3.3V up to 16V and has built-in voltage regulators and signal translators.
- Note: The Weather Shield comes as a stand-alone board. Headers, connectors and additional sensors will need to be purchased separately.
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun Electronics
Dimensions: 0.24 x 2.95 x 3.15 inches
See On Amazon #9
SparkFun GPS Logger Shield
Asin: B01D6CIMZ8 | Model: GPS-13750 | PartNumber: GPS-13750 | Ean: 0717520028437 | UPC: 717520028437
Up To 10Hz Update Rate.
Operating Voltage: 3.3V From The Arduino 5V Source.
Microsd Socket.
66-Channel Gps Receiver Featuring A Media Tek Mt3339 Architecture.
Features
- GP3906-TLP GPS Module
- 66-channel GPS receiver featuring a Media Tek MT3339 architecture
- Up to 10Hz update rate
- microSD socket
- Operating Voltage: 3.3V from the Arduino 5V source
- See more on Amazon...
Brand: SparkFun | Manufacturer: Sparkfun
Dimensions: 1.00 x 6.00 x 3.00 inches | Weight: 0.03 pounds
See On Amazon #10
Temperature Sensor Development Tools Photon Weather Shield
Asin: B07C9XM953
Brand: SparkFun
See On Amazon #11
Sparkfun Photon Weather Shield
Asin: B071CG6KTS | Model: DEV-13674 | PartNumber: DEV-13674 | Ean: 0645220826452 | UPC: 645220826452
Manufacturer: SparkFun
See On Amazon
Looking For Something Else?
Search