Sparkfun Spectrum Shield
Asin: B00X0K30I6 | Model: DEV-13116 | PartNumber: DEV-13116 | Ean: 0799430213271, 7431904519573 | UPC: 799430213271
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Collaboration With Ben Moyes Of Bliptronics.
Headers Required (Not Included).
Arduino Shield.
Features
- MSGEQ7 graphic equalizer display filter
- Arduino Shield
- collaboration with Ben Moyes of Bliptronics
- Headers required (not included)
- See more on Amazon...
Brand: SparkFun | Manufacturer: Sparkfun
Dimensions: 0.30 x 2.50 x 2.20 Inches | Weight: 0.04 pounds
See On Amazon Similar To Sparkfun Spectrum Shield
#1
SparkFun MIDI Shield
Asin: B017ZZYIIC | Model: 8541589300 | PartNumber: 8541589300 | Ean: 0717520027713 | UPC: 717520027713
Arduino Format Shield.
Control Synthesizers, Sequencers, And Other Musical Devices.
Soldering Required.
Features
- SparkFun MIDI Shield
- Soldering required
- Arduino Format Shield
- Control synthesizers, sequencers, and other musical devices
- See more on Amazon...
Brand: SparkFun | Manufacturer: Sparkfun
Dimensions: 0.12 x 4.00 x 3.00 Inches | Weight: 0.13 Pounds
See On Amazon #2
SparkFun Analog MEMS Microphone Breakout - ICS-40180 - Omni-Directional mic Features OpAmp Plug Directly into ADC on a microcontroller Low Profile Microphone on Bottom Side for Flush mounting
Asin: B098TYY88C | Model: ICS 40180 | PartNumber: ICS 40180 | Ean: 0845156011421, 5060627399234 | UPC: 845156011421
In Addition To Amplifying The Signal, The Opamp Adds A Bias Voltage Of 1/2 Vcc. With Sound Sources Such As A Normal Speaking Voice A Few Feet Away From The Microphone, The Aud Output Signal Will Be At About 200Mv Peak-To-Peak..
Features: -3Db Roll Off At 60Hz And 19.7Khz; 1.5Vdc To 3.6Vdc Supply Voltage; Should Comfortably Output 40Mw; Opa344 Provides 600Ω Output Impedance; Snr Of 65Dba.
Also Note, This Low Profile Microphone Has Its Port On The Bottom Side, So The Microphone Can Be Mounted Flush To The Outer Surface Of Your Enclosure. This Microphone Is Omni-Directional, Which Means It Does A Good Job Of Picking Up Sound Sources From All Directions..
This Board Features An Opamp To Bring The Output Of The Microphone To A Usable Level, Allowing You To Plug Directly Into An Adc On A Microcontroller.
Features
- The SparkFun Analog MEMS Microphone Breakout makes it easy to work with the InvenSense ICS-40180 analog microphone.
- This board features an OpAmp to bring the output of the microphone to a usable level, allowing you to plug directly into an ADC on a microcontroller
- In addition to amplifying the signal, the OpAmp adds a bias voltage of 1/2 VCC. With sound sources such as a normal speaking voice a few feet away from the microphone, the AUD output signal will be at about 200mV peak-to-peak.
- Also note, this low profile microphone has its port on the bottom side, so the microphone can be mounted flush to the outer surface of your enclosure. This microphone is omni-directional, which means it does a good job of picking up sound sources from all directions.
- Features: -3dB roll off at 60Hz and 19.7kHz; 1.5VDC to 3.6VDC supply voltage; Should comfortably output 40mW; OPA344 provides 600 output impedance; SNR of 65dBA
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun Electronics
Dimensions: 0.16 x 1.93 x 1.73 inches | Weight: 0.00 pounds
See On Amazon #3
SparkFun Spectrum Shield MSGEQ7 Graphic Equalizer Display Filter populated with Two 1/8" Stereo Jacks, Split Stereo Audio Input into 7 Bands per Channel
Asin: B0BSB6515W | Model: DEV-13116 | PartNumber: DEV-13116 | Ean: 0845156005994 | UPC: 845156005994
The Shield Is Populated With Two 1/8" Stereo Jacks (Like You Would Find On A Pair Of Headphones). One Serves As A Stereo Input And The Other Is A Pass-Through Output Which Allows You To Connect The Spectrum Shield In-Line Between Your Audio Source And Your Stereo System Without Interruption..
Note: This Product Is A Collaboration With Ben Moyes Of Bliptronics. A Portion Of Each Sales Goes Back To Them For Product Support And Continued Development..
The Spectrum Shield Enables Your Arduino With The Capability Of Splitting A Stereo Audio Input Into 7-Bands Per Channel. You Can Then Read The Amplitude Of Each Channel Using The Adc Allowing You To Control Everything From Leds To Motors, Pumps To Relays, Or Even Fire, All With Sound..
The Spectrum Shield Features The Msgeq7 Graphic Equalizer Display Filter. Two Of These Ics Allow You To Split A Stereo Audio Input Into 7-Bands (Per Channel) And Read The Amplitude Of Each Using The Adc..
Features
- The Spectrum Shield compatible with Arduino is enabled with the capability of splitting a stereo audio input into 7-bands per channel.
- The Spectrum Shield features the MSGEQ7 graphic equalizer display filter. Two of these ICs allow you to split a stereo audio input into 7-bands (per channel) and read the amplitude of each using the ADC.
- The shield is populated with two 1/8 stereo jacks (like you would find on a pair of headphones). One serves as a stereo input and the other is a pass-through output which allows you to connect the Spectrum Shield in-line between your audio source and your stereo system without interruption.
- The Spectrum Shield enables your Arduino with the capability of splitting a stereo audio input into 7-bands per channel. You can then read the amplitude of each channel using the ADC allowing you to control everything from LEDs to motors, pumps to relays, or even fire, all with sound.
- Note: This product is a collaboration with Ben Moyes of Bliptronics. A portion of each sales goes back to them for product support and continued development.
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun Electronics
Dimensions: 0.31 x 3.54 x 2.95 inches
See On Amazon #4
SparkFun WiFi Shield - ESP8266
Asin: B0130K4H5A | Model: 8541608398 | PartNumber: 8541608398 | Ean: 0717520027416 | UPC: 717520027416
Integrated Tcp/Ip Protocol Stack.
+19.5Dbm Output Power In 802.11B Mode.
Integrated Low Power 32-Bit Cpu Could Be Used As Application Processor.
Wi-Fi Direct (P2p), Soft-Ap.
Features
- Arduino R3 Layout with 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated low power 32-bit CPU could be used as application processor
- +19.5dBm output power in 802.11b mode
- See more on Amazon...
Brand: SparkFun | Manufacturer: Sparkfun
Dimensions: 0.13 x 4.00 x 3.00 inches
See On Amazon #5
SparkFun Qwiic Shield Compatible with Teensy (not Included) - Extended - 4.1, 3.6, or 3.5 Footprint Compatible - 3.3V - with headers
Asin: B08VRNVXB1 | Model: DEV-17156 | PartNumber: DEV-17156 | Ean: 0845156010882 | UPC: 845156010882
This Shield Connects The I2c Bus (Gnd, 3.3V, Sda, And Scl) On Your Teensy To Four Sparkfun Qwiic Connectors (Two Horizontally And Two Vertically Mounted). The Qwiic Ecosystem Allows For Easy Daisy Chaining So, As Long As Your Devices Are On Different Addresses, You Can Connect As Many Qwiic Devices As You'd Like..
Features: Teensy 4.1, 3.6, Or 3.5 Footprint Compatible, 4X Qwiic Connection Ports,"Prog" Button W/ Satisfying Tactile Feedback, I2c Jumper, 3.3V And Gnd Buses.
Includes: Sparkfun Qwiic Shield For Teensy - Extended, 2X 24-Pin Headers, 1X 5 Pin Header.
This Shield Is Sized To Work With The Footprint Of Teensy 4.1, Teensy 3.6, And Teensy 3.5..
Features
- The SparkFun Extended Qwiic Shield compatible with Teensy provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Teensy boards.
- This shield is sized to work with the footprint of Teensy 4.1, Teensy 3.6, and Teensy 3.5.
- This shield connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Teensy to four SparkFun Qwiic connectors (two horizontally and two vertically mounted). The Qwiic ecosystem allows for easy daisy chaining so, as long as your devices are on different addresses, you can connect as many Qwiic devices as you'd like.
- Includes: SparkFun Qwiic Shield for Teensy - Extended, 2x 24-pin headers, 1x 5 pin header
- Features: Teensy 4.1, 3.6, or 3.5 Footprint Compatible, 4x Qwiic Connection Ports,PROG Button w/ satisfying tactile feedback, I2C Jumper, 3.3V and GND Buses
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun Electronics
Dimensions: 0.24 x 3.54 x 2.36 Inches | Weight: 0.02 Pounds
See On Amazon #6
SparkFun Ardumoto - Motor Driver Shield
Asin: B01C4WB532 | Model: LYSB01C4WB532-ELECTRNCS | PartNumber: LYSB01C4WB532-ELECTRNCS | Ean: 0717520028291 | UPC: 717520028291
Shares Same Vin Line With Arduino Or Compatible Board.
Driver Lines Are Diode Protected From Back Emf.
2 Amps Per Channel.
Features
- L298 H-bridge Arduino motor shield
- 2 amps per channel
- Shares same Vin line with Arduino or compatible board
- Driver lines are diode protected from back EMF
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun
Dimensions: 1.00 x 3.00 x 2.00 inches
See On Amazon #7
SparkFun Weather Shield
Asin: B00H8OI1RU | Ean: 0799430211741 | UPC: 799430211741
Light Sensor - Als-Pt19.
Works With Arduino And Compatible Boards.
On Board 3.3V Regulator.
Barometric Pressure - Mpl3115a2.
Features
- Humidity/Temperature Sensor - Si7021
- Barometric Pressure - MPL3115A2
- Light Sensor - ALS-PT19
- On board 3.3V regulator
- Works with Arduino and compatible boards
- See more on Amazon...
Brand: SparkFun | Manufacturer: Sparkfun
Dimensions: 0.13 x 4.00 x 3.00 inches | Weight: 0.10 pounds
See On Amazon #8
SparkFun Qwiic Shield Compatible with Teensy (not Included) - 4.0, 3.2, or LC Footprint Compatible - 3.3V
Asin: B08L6Z38JP | Model: DEV-17119 | PartNumber: DEV-17119 | Ean: 0845156010875 | UPC: 845156010875
This Shield Is Sized To Work With The Footprint Of 4.0, 3.2, And Lc. This Shield Connects The I2c Bus (Gnd, 3.3V, Sda, And Scl) On Your Board To Four Sparkfun Qwiic Connectors (Two Horizontally And Two Vertically Mounted)..
Includes: Sparkfun Qwiic Shield Compatible With Teensy And Header Kit.
Compatible With Teensy 4.0, 3.2, Or Lc Footprint Compatible, 4X Qwiic Connection Ports, "Prog" Button W/ Satisfying Tactile Feedback, I2c Jumper, 3.3V And Gnd Buses.
The Qwiic Ecosystem Allows For Easy Daisy-Chaining So, As Long As Your Devices Are On Different Addresses, You Can Connect As Many Qwiic Devices As You'd Like..
Features
- The SparkFun Qwiic Shield compatible with Teensy provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your boards
- The Qwiic ecosystem allows for easy daisy-chaining so, as long as your devices are on different addresses, you can connect as many Qwiic devices as you'd like.
- This shield is sized to work with the footprint of 4.0, 3.2, and LC. This shield connects the I2C bus (GND, 3.3V, SDA, and SCL) on your board to four SparkFun Qwiic connectors (two horizontally and two vertically mounted).
- Compatible with Teensy 4.0, 3.2, or LC Footprint Compatible, 4x Qwiic Connection Ports, PROG Button w/ satisfying tactile feedback, I2C Jumper, 3.3V and GND Buses
- Includes: SparkFun Qwiic Shield compatible with Teensy and Header Kit
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun Electronics
Dimensions: 0.59 x 1.18 x 2.05 inches | Weight: 0.02 Pounds
See On Amazon #9
SparkFun microSD Shield
Asin: B01CF50NJA | Model: LYSB01CF50NJA-ELECTRNCS | PartNumber: LYSB01CF50NJA-ELECTRNCS | Ean: 0717520028307 | UPC: 717520028307
Standard Arduino R3 Shield Form Factor Compatible With Old Arduino Boards.
Level Shifting Between 5V Arduino And 3.3V Microsd.
Features
- microSD shield for Arduino
- Level shifting between 5V Arduino and 3.3V microSD
- Standard Arduino R3 shield form factor compatible with old Arduino boards
- See more on Amazon...
Brand: SparkFun | Manufacturer: Sparkfun
Dimensions: 1.00 x 3.00 x 2.00 inches | Weight: 0.00 pounds
See On Amazon #10
SparkFun Electronics Teensy Arduino Shield Adapter
Asin: B083JHJKFN | Model: KIT-15716 | PartNumber: KIT-15716 | Ean: 0305399553053 | UPC: 305399553053
Jst Battery Connector.
Skill Level: Kit Basic Soldering Required.
Note: The Teensy Arduino Shield Adapter Comes As A Kit And Will Need To Be Soldered Together..
Real Time Clock Battery.
Features
- Arduino R3 Interface
- Real Time Clock Battery
- JST Battery Connector
- Note: The Teensy Arduino Shield Adapter comes as a kit and will need to be soldered together.
- Skill Level: Kit Basic Soldering Required
- See more on Amazon...
Brand: SparkFun | Manufacturer: Electronics123.com, Inc.
Weight: 0.13 pounds
See On Amazon #11
SparkFun GPS Logger Shield
Asin: B01D6CIMZ8 | Model: GPS-13750 | PartNumber: GPS-13750 | Ean: 0717520028437 | UPC: 717520028437
Up To 10Hz Update Rate.
Operating Voltage: 3.3V From The Arduino 5V Source.
Microsd Socket.
66-Channel Gps Receiver Featuring A Media Tek Mt3339 Architecture.
Features
- GP3906-TLP GPS Module
- 66-channel GPS receiver featuring a Media Tek MT3339 architecture
- Up to 10Hz update rate
- microSD socket
- Operating Voltage: 3.3V from the Arduino 5V source
- See more on Amazon...
Brand: SparkFun | Manufacturer: Sparkfun
Dimensions: 1.00 x 6.00 x 3.00 inches | Weight: 0.03 pounds
See On Amazon #12
SparkFun Ardumoto Shield Kit
Asin: B019CNWJS6 | Ean: 0717520027843 | UPC: 717520027843
Brand: SparkFun | Manufacturer: Sparkfun
Dimensions: 1.00 x 2.00 x 1.00 inches | Weight: 0.13 pounds
See On Amazon #13
Sparkfun Qwiic Shield For Photon
Asin: B07C6MPQY4 | Ean: 0653958512233, 0731717891178 | UPC: 653958512233, 731717891178
4X Qwiic Connection Ports.
3.3V And Gnd Buses.
Small Prototyping Area.
2X Photon Stackable Header, 12-Pin.
Features
- 1x SparkFun Qwiic Shield for Photon
- 2x Photon Stackable Header, 12-pin
- 4x Qwiic Connection Ports
- Small Prototyping Area
- 3.3V and GND Buses
- See more on Amazon...
Brand: SparkFun | Manufacturer: Electronics123.com, Inc.
Dimensions: 0.10 x 1.50 x 1.50 inches | Weight: 0.00 pounds
See On Amazon
Looking For Something Else?
Search