SparkFun MIDI Shield
Asin: B017ZZYIIC | Model: 8541589300 | PartNumber: 8541589300 | Ean: 0717520027713 | UPC: 717520027713
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Arduino Format Shield.
Control Synthesizers, Sequencers, And Other Musical Devices.
Soldering Required.
Features
- SparkFun MIDI Shield
- Soldering required
- Arduino Format Shield
- Control synthesizers, sequencers, and other musical devices
- See more on Amazon...
Brand: SparkFun | Manufacturer: Sparkfun
Dimensions: 0.12 x 4.00 x 3.00 Inches | Weight: 0.13 Pounds
See On Amazon Similar To SparkFun MIDI Shield
#1
SparkFun MP3 Player Shield- MP3 decoder- Turn Any Compatible with Arduino Board into a Fully Functional MP3 Player- 3.5mm Audio Out Jack- 0.1" Spaced Header for Speaker Out- microSD Card Slot
Asin: B09NJQBG99 | Ean: 0845156005529 | UPC: 845156005529
Features: 3.5Mm Audio Out Jack, 0.1" Spaced Header For Speaker Out, Microsd Card Slot. The Shield Does Use Up Quite A Few Pins, But Here Are The Pins Still Available To Connect To Other Components. The Hardware Uart Pins -- Rx And Tx -- On Pins 0 And 1, D5 And D10 (Pwm Pins!), All Analog Pins (A0 Through A5)..
If You're Not Sure Which Version You've Got, There's A Version Number On The Bottom Copper Layer, Underneath The Headphone Jack, As Shown Below. Note: Headers Not Included..
The Centerpiece Of The Mp3 Player Shield Is A Vs1053b Audio Codec Ic. The Vs1053b Is A Multi Talented Little Chip. On Top Of Mp3's, It Can Also Decode Ogg Vorbis, Aac, Wma, And Midi..
Do You Just Want To Be Able To Say You Built Your Own Mp3 Player? The Mp3 Player Shield Is An Easy Way To Add Music Or Sound Effects To Your Project..
Features
- Are you looking to add some grooves to your project. Does your haunted house or Halloween costume need some sound effects embedded into it?
- Do you just want to be able to say you built your own MP3 player? The MP3 Player Shield is an easy way to add music or sound effects to your project.
- Features: 3.5mm audio out jack, 0.1 spaced header for speaker out, microSD card slot. The shield does use up quite a few pins, but here are the pins still available to connect to other components. The hardware UART pins -- RX and TX -- on pins 0 and 1, D5 and D10 (PWM pins!), All analog pins (A0 through A5).
- The centerpiece of the MP3 Player Shield is a VS1053B Audio Codec IC. The VS1053B is a multi talented little chip. On top of MP3's, it can also decode Ogg Vorbis, AAC, WMA, and MIDI.
- If you're not sure which version you've got, there's a version number on the bottom copper layer, underneath the headphone jack, as shown below. Note: Headers not included.
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun Electronics
Dimensions: 0.28 x 3.35 x 3.35 Inches | Weight: 0.05 Pounds
See On Amazon #2
Comimark 1Pcs MIDI Shield Breakout Board for R3 AVI PIC Digital Interface Adapter
Asin: B07X44L1T4 | Model: LY469 | PartNumber: LY469 | Ean: 0657835700867 | UPC: 657835700867
Compatible: 100% Compatible.
We Highly Appreciate All Customers Opinions To Improve The Selling, Also If Anything You Unsatisfied, Please Contact Us For Probable Best Solution..
Package Included: 1Pcs Module.
Midi Adapter Plate Provides Midi - In And Midi - Out Connection, And Midi Thru Port. Midi - Port Is Light In Isolation, To Prevent The Ground Loop..
Features
Through the MIDI adapter plate, your board or other microcontrollers can be accessed to powerful MIDI communication protocol. MIDI protocol and asynchronous serial interface has many similarities, so users can use the micro-controller UART pin to send MIDI event information.
- MIDI adapter plate provides MIDI - IN and MIDI - OUT connection, and MIDI THRU port. MIDI - port is light IN isolation, to prevent the ground loop.
- Compatible: 100% compatible
- Package Included: 1pcs Module
- We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.
- See more on Amazon...
Brand: Comimark | Manufacturer: Comimark
See On Amazon #3
MIDI Shield Musical Breakout Board Instrument Digital Interface Adapter Plate for Compatible Arduino Adapter Board Module
Asin: B07R8GQLSG | Ean: 0741722282991 | UPC: 741722282991
Brand: Reland Sung | Manufacturer: Reland Sung
See On Amazon #4
SparkFun WiFi Shield - ESP8266
Asin: B0130K4H5A | Model: 8541608398 | PartNumber: 8541608398 | Ean: 0717520027416 | UPC: 717520027416
Integrated Tcp/Ip Protocol Stack.
+19.5Dbm Output Power In 802.11B Mode.
Integrated Low Power 32-Bit Cpu Could Be Used As Application Processor.
Wi-Fi Direct (P2p), Soft-Ap.
Features
- Arduino R3 Layout with 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated low power 32-bit CPU could be used as application processor
- +19.5dBm output power in 802.11b mode
- See more on Amazon...
Brand: SparkFun | Manufacturer: Sparkfun
Dimensions: 0.13 x 4.00 x 3.00 Inches
See On Amazon #5
Sparkfun Spectrum Shield
Asin: B00X0K30I6 | Model: DEV-13116 | PartNumber: DEV-13116 | Ean: 0799430213271, 7431904519573 | UPC: 799430213271
Collaboration With Ben Moyes Of Bliptronics.
Headers Required (Not Included).
Arduino Shield.
Features
- MSGEQ7 graphic equalizer display filter
- Arduino Shield
- collaboration with Ben Moyes of Bliptronics
- Headers required (not included)
- See more on Amazon...
Brand: SparkFun | Manufacturer: Sparkfun
Dimensions: 0.30 x 2.50 x 2.20 Inches | Weight: 0.04 Pounds
See On Amazon #6
Sparkfun Photon Weather Shield
Asin: B071CG6KTS | Model: DEV-13674 | PartNumber: DEV-13674 | Ean: 0645220826452 | UPC: 645220826452
Manufacturer: SparkFun
See On Amazon #7
SparkFun Ardumoto - Motor Driver Shield
Asin: B01C4WB532 | Model: LYSB01C4WB532-ELECTRNCS | PartNumber: LYSB01C4WB532-ELECTRNCS | Ean: 0717520028291 | UPC: 717520028291
Shares Same Vin Line With Arduino Or Compatible Board.
Driver Lines Are Diode Protected From Back Emf.
2 Amps Per Channel.
Features
- L298 H-bridge Arduino motor shield
- 2 amps per channel
- Shares same Vin line with Arduino or compatible board
- Driver lines are diode protected from back EMF
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun
Dimensions: 1.00 x 3.00 x 2.00 Inches
See On Amazon #8
DAOKI MIDI Shield Breakout Board MIDI Adapter Board 3 Right Angle Female MIDI Connector Serial to MIDI Module with MIDI USB Cable for R3 AVI PIC Digital Interface Adapter
Asin: B093WKM57N | Model: JK-US-073 | PartNumber: JK-US-073
【About Installation】: The Midi Adapter Board Can Be Installed Directly Like The Shield On The Top Of The Arduino Board: Connect Midi-In/Thru To The Arduino Hardware Rx Pin, And Connect Midi-Out To Tx. Its Arduino Data And Analog Pins, Power Bus And Bus Can Be Transferred Out..
【Item Condition】: The Module Is 100% Made Of Original Electronic Components, And The Product Is A Brand New Product, You Can Buy It With Confidence.
【Note】: The Run / Pgm Switch Allows Users To Program The Serial Port Of The Forarduino Board Without Disassembling The Board. Note: The Three-Hole Midi Connector Is Not Soldered On The Midi Adapter Board, But These Connectors Are Included In This Product..
【Similarities】: Through The Midi Adapter Board, Your Arduino Board Or Other Microcontroller Can Access The Powerful Midi Communication Protocol. Midi Protocol And Asynchronous Serial Interface Have Many Similarities, So Users Can Use The Microcontroller Uart Pins To Send Midi Event Messages..
Features
- Prevent loops : The MIDI adapter board provides MIDI-IN and MIDI-OUT connections and MIDI THRU ports. The MIDI-port is light IN isolation to prevent ground loops.
- Similarities : Through the MIDI adapter board, your Arduino board or other microcontroller can access the powerful MIDI communication protocol. MIDI protocol and asynchronous serial interface have many similarities, so users can use the microcontroller UART pins to send MIDI event messages.
- About installation : The MIDI adapter board can be installed directly like the shield on the top of the Arduino board: connect MIDI-IN/THRU to the Arduino hardware RX pin, and connect MIDI-OUT to TX. Its Arduino data and analog pins, power bus and bus can be transferred out.
- Note : The RUN / PGM switch allows users to program the serial port of the forArduino board without disassembling the board. Note: The three-hole MIDI connector is not soldered on the MIDI adapter board, but these connectors are included in this product.
- Item Condition : The module is 100% made of original electronic components, and the product is a brand new product, you can buy it with confidence
- See more on Amazon...
Brand: DAOKI | Manufacturer: DAOKI
Weight: 0.22 Pounds
See On Amazon #9
SparkFun Electronics Teensy Arduino Shield Adapter
Asin: B083JHJKFN | Model: KIT-15716 | PartNumber: KIT-15716 | Ean: 0305399553053 | UPC: 305399553053
Jst Battery Connector.
Skill Level: Kit Basic Soldering Required.
Note: The Teensy Arduino Shield Adapter Comes As A Kit And Will Need To Be Soldered Together..
Real Time Clock Battery.
Features
- Arduino R3 Interface
- Real Time Clock Battery
- JST Battery Connector
- Note: The Teensy Arduino Shield Adapter comes as a kit and will need to be soldered together.
- Skill Level: Kit Basic Soldering Required
- See more on Amazon...
Brand: SparkFun | Manufacturer: Electronics123.com, Inc.
Weight: 0.13 Pounds
See On Amazon #10
SparkFun Ardumoto Shield Kit
Asin: B019CNWJS6 | Ean: 0717520027843 | UPC: 717520027843
Brand: SparkFun | Manufacturer: Sparkfun
Dimensions: 1.00 x 2.00 x 1.00 Inches | Weight: 0.13 Pounds
See On Amazon #11
Testg Board Excellent MIDI Shield Module Digital Interface Adapter Electronic Meter 6 * 6 * 3
Asin: B0C99XTW7Q | Model: SUPYINI90sqvu7tbp | PartNumber: SUPYINI90sqvu7tbp
The 2.54Mm Male Headers On Both Sides Of The Extension Can Be Easily Connected To Your Project. Easy To Use. You Can Switch Off Data Reception With The Midi In Switch..
Midi Interfaces, Access Function Other Microcontrollers Can Access The Powerful Midi Communication Protocol Via The Midi Adapter Board..
Made Of High Quality Pcb Material, Safe And Durable To Use, It Has A Long Service Life. Small And Practical, Fast And Efficient..
Programming The Run Pgm Switch Allows Users To Program The For Card's Serial Port Without Disassembling The Card. Note: The Three-Hole Midi Connector Is Not Soldered On The Midi Adapter Board, Midi 2X2 Interface, Or Computer Recording Midi Controllers, But These Connectors Are Included In This Product.
Features
- SAFE DURABLE TO USE Made of high quality PCB material, safe and durable to use, has a long service life. Small and practical, fast and efficient
- Programming The RUN PGM switch allows users to program the For card's serial port without disassembling the card. Note: The three-hole MIDI connector is not soldered on the MIDI adapter board, midi 2x2 interface, or computer recording midi controllers, but these connectors are included in this product
- The 2.54mm male headers on both sides of the extension can be easily connected to your project. Easy to use. You can switch off data reception with the MIDI IN switch.
- Made of high quality PCB material, safe and durable to use, it has a long service life. Small and practical, fast and efficient.
- Midi interfaces, access function Other microcontrollers can access the powerful MIDI communication protocol via the MIDI adapter board.
- See more on Amazon...
Brand: SUPYINI | Manufacturer: SUPYINI
See On Amazon #12
Sparkfun Qwiic Shield For Photon
Asin: B07C6MPQY4 | Ean: 0653958512233, 0731717891178 | UPC: 653958512233, 731717891178
4X Qwiic Connection Ports.
3.3V And Gnd Buses.
Small Prototyping Area.
2X Photon Stackable Header, 12-Pin.
Features
- 1x SparkFun Qwiic Shield for Photon
- 2x Photon Stackable Header, 12-pin
- 4x Qwiic Connection Ports
- Small Prototyping Area
- 3.3V and GND Buses
- See more on Amazon...
Brand: SparkFun | Manufacturer: Electronics123.com, Inc.
Dimensions: 0.10 x 1.50 x 1.50 Inches | Weight: 0.00 Pounds
See On Amazon
Looking For Something Else?
Search