Sprocket Clamp Assembly
Asin: B00KWLL3Y4
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Note: Be Sure To Evenly Fasten The Sprocket Clamp Assembly Bolts. Uneven Sprockets Can Cause Damage To Your Chain, Engine, And Bike Frame.
Installation May Require Extra Tools: Take One Of The Rubber Gaskets And Slit One Side. Open It The Gasket And Mount It Around The Hub Of Your Wheel (Inside Of The Wheel). Mount The Second Gasket On To The Outside Of The Wheel, And Your Sprocket On Top Of The Gasket. Place Your Screws Through The Sprocket And The Gaskets, And Mount The Metal Plates On To The Screws On Top Of The Rubber Gasket Around Your Hub. Screw The Nuts For The Assembly Down Evenly, And You're Ready To Ride.
Features
- The Sprocket Clamp Assembly will mount the drive sprocket of any 2-stroke or 4-stroke 48cc or 66/80cc bike engine kit to the wheel of a bicycle, turning your wheel in to a motorized bike wheel
- Installation may require extra tools: Take one of the rubber gaskets and slit one side. Open it the gasket and mount it around the hub of your wheel (inside of the wheel). Mount the second gasket on to the outside of the wheel, and your sprocket on top of the gasket. Place your screws through the sprocket and the gaskets, and mount the metal plates on to the screws on top of the rubber gasket around your hub. Screw the nuts for the assembly down evenly, and you're ready to ride
- Note: Be sure to evenly fasten the sprocket clamp assembly bolts. Uneven sprockets can cause damage to your chain, engine, and bike frame
- See more on Amazon...
Brand: Flying Horse | Manufacturer: Flying Horse
See On Amazon Similar To Sprocket Clamp Assembly
#1
Mirrycle MTB Bar End Mountain Bicycle Mirror, Black
Asin: B0009R96YK | Model: MI0001 | PartNumber: MI0001
Ean: 5052195129610, 0885266215692, 0885183100217, 0656750833087, 0885925277818, 0885618228196, 0764459234958, 0885585573787, 0885955812935
UPC: 885925277818, 885618228196, 885955812935, 656750833087, 885266215692, 885183100217, 885585573787, 764459234958
Mounts Onto Bar End Of Handle Bar.
Sport Type: Cycling.
Fits Inside Handlebars With 13.75 To 22.5 Inside Diameters.
Wide View Convex Mirror Pivots To Any Viewing Angle.
Features
- Three-inch round, handlebar mounted rearview mirror for bicycles
- Wide view convex mirror pivots to any viewing angle
- Mounts onto bar end of handle bar
- Fits inside handlebars with 13.75 to 22.5 inside diameters
- Sport type: Cycling
- See more on Amazon...
First Available: 02/11/2009
Brand: Mirrycle | Manufacturer: Mirrycle
Dimensions: 1.30 x 4.00 x 7.50 inches | Weight: 0.25 pounds
Warranty: Replace if was broken from factory
See On Amazon #2
Finish Line Fiber Grip Carbon Fiber Bicycle Assembly Gel, 1.75-Ounce Tube
Asin: B0012RIEM6 | Model: F01750101 | PartNumber: F01750101 | Ean: 0300717724627, 0300717686017, 0665020500000, 0300716242917, 0036121610019, 0343538927594 | UPC: 300717686017, 300717724627, 300716242917, 036121610019, 665020500000, 343538927594
Tested And Approved By Leading Carbon Fiber Component Manufacturers. Clear, Non-Staining Non-Toxic.
Apply Fiber Grip In A Thin Film To Clamping Areas Of Stems, Handlebars, Seat Posts, And Seat Tubes To Eliminate The Need For Over Tightening, Which Can Cause Internal Fractures And Fatigue Of Carbon Fiber Parts..
Features
- Fiber Grip(TM): Carbon Fiber Assembly Gel is specially designed to reduce slippage between clamped carbon fiber surfaces. Fiber Grip eliminates the need to over tighten clamps to achieve secure connections.
- Apply Fiber Grip in a thin film to clamping areas of stems, handlebars, seat posts, and seat tubes to eliminate the need for over tightening, which can cause internal fractures and fatigue of carbon fiber parts.
- Tested and approved by leading carbon fiber component manufacturers. Clear, Non-staining Non-Toxic
- See more on Amazon...
First Available: 06/12/2009
Brand: Finish Line | Manufacturer: Finish Line
Dimensions: 4.72 x 6.30 x 6.30 inches | Weight: 0.10 pounds
See On Amazon #3
7/8'' 22mm Thumb Throttle Cable Accelerator Handle Assembly for 50cc 70cc 90cc 110cc 125cc 250cc ATV Quad Go Kart TaoTao Pit Bike
Asin: B08SWMFP98 | Model: TR-1025 | PartNumber: TR-1025 | Ean: 0718225603813 | UPC: 718225603813
High Quality- Thumb Throttle Is Made Of High Quality Aluminium Alloy,Smooth Surface, The Cable Is Made Of Metal And Handlebar Grip Is Made Of Rubber,Which Is Non Toxic And Durable..
Package Contents- 1 Pcs Thumb Controller, 1 Pcs Accelerator Cable, 4 Cs Cable Ties, 1 Pcs Screwdriver,1 Pcs Wrench..
Easy Installation- Quick And Easy To Install Without Extra Adjustment.Convenient For Assembly And Disassemble..
Size-Inner Cableinner Cable Length: 46.5 Inches(1180Mm). Thumb Controller Fits 7/8" (22Mm) Handle Bars..
Features
- Fitment: Fit for 50cc 70cc 90cc 110cc 125cc 150cc 200cc & 250cc ATV which have 7/8 "handlebars, such as TaoTao, Buyang, Coolsport, Lifan, Kazuma, SUNL, Redcat, eagle, etc. Notice: Please ensure this part fits for your motorcycle before order.
- Size-inner cableinner cable Length: 46.5 inches(1180mm). Thumb Controller fits 7/8 (22mm) handle bars.
- High Quality- Thumb throttle is made of high quality aluminium alloy,smooth surface, the cable is made of metal and handlebar grip is made of rubber,which is non toxic and durable.
- Easy Installation- Quick and easy to install without extra adjustment.Convenient for assembly and disassemble.
- Package Contents- 1 pcs Thumb Controller, 1 pcs Accelerator Cable, 4 cs Cable Ties, 1 pcs Screwdriver,1 pcs Wrench.
- See more on Amazon...
Brand: The Revenant | Manufacturer: The Revenant
See On Amazon #4
Detacher Breaker Cutter Fit for #25#35#41#40#50#60 415H,428H, 520,530 Roller Chain Bicycle Go Kart ATV Chains Replacement (Black)
Asin: B06XQDXW78 | Model: 43237-2 | PartNumber: 43237-2 | Ean: 0714559267271 | UPC: 714559267271
✔Processing:Design Universal Chain Breaker Tool Replaceable Press Pin Is Heat Treated And Hardened;.
✔Applicable:Roller Chain Detacher Breaker Cutter For Motorcycle Bicycle Go Kart Atv Chains Replacement;.
✔Package:Free 1 Extra Niddle Pin Included;.
✔Adjustable:Cut Chain Into The Length Your Need Without Any Other Tools Easily;.
Features
- Material: High Carbon Steel, Compound Strengthening;
- Adjustable:Cut chain into the length your need without any other tools easily;
- Processing:Design Universal Chain Breaker Tool Replaceable Press Pin is Heat Treated And Hardened;
- Package:Free 1 Extra Niddle Pin Included;
- Applicable:Roller Chain Detacher Breaker Cutter for Motorcycle Bicycle Go Kart ATV Chains Replacement;
- See more on Amazon...
Brand: KZNANZN | Manufacturer: KZNANZN
Weight: 0.15 Pounds
See On Amazon #5
Park Tool Unisex's PCS-10.3 Workstand, Blue, One Size
Asin: B097DZ9XRG | Model: PCS-10.3 | PartNumber: PCS-10.3 | Ean: 0763477007100 | UPC: 763477007100
Maximum Weight Capacity*: 80 Lbs. (36 Kg).
Folds Down To 45" X 14.5" (1140 Mm X 370 Mm).
Height Adjustable From 39" To 57" (990 Mm–1450 Mm) Using Convenient Quick-Release Lever.
Narrow Clamping Jaws (2.7"/70 Mm) Fit Into Tight Areas Or On Short Seat Posts.
Features
- Cam-actuated micro-adjustable clamp fits 7/8" to 3" (22 mm 76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts
- Narrow clamping jaws (2.7/70 mm) fit into tight areas or on short seat posts
- Maximum weight capacity*: 80 lbs. (36 kg)
- Height adjustable from 39 to 57 (990 mm 1450 mm) using convenient quick-release lever
- Folds down to 45 x 14.5 (1140 mm x 370 mm)
- See more on Amazon...
Brand: Park Tool | Manufacturer: Park Tool
Dimensions: 39.33 x 11.02 x 11.02 inches | Weight: 15.87 pounds
See On Amazon #6
Hollywood Racks Sport Rider 2" Hitch Bike Rack, Carries 2 Bikes up to 80 lbs Each for Standard, Fat Tire and Electric Bicycles - Heavy Duty, Foldable Ebike Rack for Car, Truck, RV and SUV
Asin: B08HJTFN64 | Model: HR1500 | PartNumber: HR1500 | Ean: 0014658015002 | UPC: 014658015002
Suitable For A Variety Of Bike Sizes And Frames: This Bike Rack Hitch Mount With Universal Wheel Holders Accommodates Tires Up To 5 Inches Wide. Designed To Carry A Wide Range Of Models And Styles, Our Hitch Mount Bike Carrier Is Strong, Sturdy And Versatile..
Smart Tilting Mechanism For Easy Vehicle Access: Our Fat Bike Rear Rack Lets You Access Your Vehicle Even When Bikes Are Loaded. Sturdy, Durable And Lasting, These Ebike Racks For Tow Hitch Are Designed For Ease Of Use And Convenience..
Not To Be Used On Front Hitches. Not To Be Used With A Bike Cover. Not To Be Used With Any 1-1/4" - 2" Adapter. Not To Be Used With Any Hitch Extension Longer Than 8". Not To Be Used On Any Travel Trailer, Fifth Wheel Or Towed Vehicle.
Foldable Design For Easy Vehicle Access And Storage: Our Bike Racks For Tow Hitch Fold Flat Against The Car Or Truck When Not In Use. Foldable Bike Racks And Hitches Are Designed To Increase Driver Safety And Convenience..
Effective Security Features For Safe Bike Transport: Our Hitch Mount Bike Rack Features Locking Frame Clamps And A Wobble-Free Hitch-Tightening System. This E Bike Rack Includes A Locking Hitch Pin And Security Cable For Further Protection..
Features
- Designed for Heavy Duty Load Carrying Capacity: Take your ebikes everywhere with this platform bike rack. Our sturdy, durable bike carrier hitch mount easily carries two electric or standard bikes weighing up to 80 lbs each.
- Effective Security Features for Safe Bike Transport: Our hitch mount bike rack features locking frame clamps and a wobble-free hitch-tightening system. This e bike rack includes a locking hitch pin and security cable for further protection.
- Suitable for a Variety of Bike Sizes and Frames: This bike rack hitch mount with universal wheel holders accommodates tires up to 5 inches wide. Designed to carry a wide range of models and styles, our hitch mount bike carrier is strong, sturdy and versatile.
- Foldable Design for Easy Vehicle Access and Storage: Our bike racks for tow hitch fold flat against the car or truck when not in use. Foldable bike racks and hitches are designed to increase driver safety and convenience.
- Smart Tilting Mechanism for Easy vehicle Access: Our fat bike rear rack lets you access your vehicle even when bikes are loaded. Sturdy, durable and lasting, these ebike racks for tow hitch are designed for ease of use and convenience.
- Not to be used on front hitches. Not to be used with a bike cover. Not to be used with any 1-1/4 - 2 Adapter. Not to be used with any Hitch Extension longer than 8. Not to be used on any travel trailer, fifth wheel or towed vehicle
- See more on Amazon...
Brand: Hollywood Racks | Manufacturer: Hollywood Racks
Dimensions: 8.00 x 37.00 x 22.00 inches | Weight: 56.00 pounds
Warranty: Limited Lifetime
See On Amazon #7
YOXUFA 40/41/420 Chain 40T Tooth Mini Bike Sprocket 40mm Bore for Coleman BT200X CT200U CT200U-EX Baja Warrior TrailMaster Massimo MB165 MB200 Predator 212 196cc 200cc 6.5hp Powersports Go Kart Parts
Asin: B0CHW3DGMS
In The Same Condition Of Front Go Kart Sprocket Unchanged, The Smaller Rear Sprocket Can Increase Speed And Save Fuel, Provide Your Mini Bike More Powerful Power To Conquer All Kinds Of Terrain..
Package List: 1 * 40 Chain Sprocket, 4 * Screw, 4 * Nuts, 2 *420 Chain Master Links.
Size Of 420 Sprocket : 40/41/420 Chain,Teeth: 40 Tooth,Mounting Hole Distance (Center To Center, Bolt Hole Circle): 3-3/16" (80 Mm), Center Hole Diameter: 1-9/16" (40 Mm), Overall Diameter: 6-1/2"(165Mm).
The Precision-Machined Metal Alloy Construction Ensures Firmness And Resistance Of Mini Bike Rear Sprocket To Wear And Tear. And The Black Anodized Finish Protects The Sprocket From Rust And Corrosion..
Features
- 420 Chain Sprocket Work on Coleman Baja TrailMaster Massimo 196cc 200cc 6.5hp Powersports Mini Bike Go Kart. Compatibility: Coleman Powersports BT200X / CT200U / CT200U-EX / CT200U-EXR, Baja Motorsports Mini Bike MB165 & MB200 (Heat, Mini Baja, Warrior), Massimo MB200, TrailMaster MB200
- The precision-machined metal alloy construction ensures firmness and resistance of mini bike rear sprocket to wear and tear. And the black anodized finish protects the sprocket from rust and corrosion.
- In the same condition of front go kart sprocket unchanged, the smaller rear sprocket can increase speed and save fuel, provide your mini bike more powerful power to conquer all kinds of terrain.
- Size of 420 Sprocket : 40/41/420 Chain,Teeth: 40 Tooth,Mounting Hole Distance (center to center, bolt hole circle): 3-3/16 (80 mm), Center Hole Diameter: 1-9/16 (40 mm), Overall Diameter: 6-1/2(165mm)
- Package List: 1 * 40 Chain Sprocket, 4 * Screw, 4 * Nuts, 2 *420 Chain Master Links
- See more on Amazon...
Brand: YOXUFA | Manufacturer: YOXUFA
See On Amazon #8
GREHUA Universal Sprocket Hub Adapter 420 Chain 42 Tooth Rear Drive Wheel Aluminum for 212cc 196cc CT200U BT200X MB200 CT100U Motovox MBX10 Baja Doodlebug DB30 80cc 105cc Mini Bike Go Kart Racing
Asin: B0CM22QCZ4 | Model: GR-SA-420LH05 | PartNumber: GR-SA-420LH05
Versatility And Accurate Design—The Precise Cutter Tooth Design On Split Sprocket Reduces Friction At High Speeds,Resulting In Smooth Chain Running And High Output.Accurate Design Can Be Express Replacement Sprockets And Different Models,The Middle Hole Design Is Perfectly Compatible With Coleman Ct200u And Ct100u.The Sprocket Hub Is Great For Converting Your Mini Bike Or Go-Kart's Split Sprocket,As It Fits Mini Bike With 6 Bolt Hole Pattern Wheels And Fits Most Mini Bike Or Go Kart Racing..
Note—Please Check As Much As Possible To The Item Picture, Model And Size Carefully Before Purchasing.Or Leave Us Messages For Assistance If You're Not Sure If The Sprocket Kit Fits..
Package Included—1 X Sprocket Hub Adapter, 1 X Red Split Sprocket(420 Chain 42T）,6 X Screws,6 X Nuts.
High Quality Material And Easy To Install—The Black Sprocket Hub Adapter Is Forged With High Quality All Aluminum,The Split Sprocket Is Made Of High Quality Aluminum Alloy Material For Lightweight,Durable And Long Service Life.Faster Weight Reduction Loss And Greater Versatility.The 420 Chain 42 Tooth Split Sprocket Is Easy To Observe Changes In Gear Ratio And Easy To Repalce Gear,Do Not Need To Remove The Axle On Your Mini Bike Or Go Kart To Change The Gear Ratio.It Is Very Easy To Install..
Features
- FITMENT fit for 212cc 196cc mini bike go kart,compatibility:Coleman CT200U CT200U-EX BT200X CT100U CC100X Baja Warrior Massimo TrailMaster MB200 80cc 105cc Monste* Moto MegaMoto B212 Motovox mbx10 Baja Doodlebug db30 Mini Bike motorcycle.
- HIGH QUALITY MATERIAL AND EASY TO INSTALL the black sprocket hub adapter is forged with high quality all aluminum,the split sprocket is made of high quality aluminum alloy material for lightweight,durable and long service life.Faster weight reduction loss and greater versatility.The 420 chain 42 tooth split sprocket is easy to observe changes in gear ratio and easy to repalce gear,do not need to remove the axle on your mini bike or go kart to change the gear ratio.It is very easy to install.
- VERSATILITY AND ACCURATE DESIGN the precise cutter tooth design on split sprocket reduces friction at high speeds,resulting in smooth chain running and high output.Accurate design can be express replacement sprockets and different models,the middle hole design is perfectly compatible with coleman CT200U and CT100U.The sprocket hub is great for converting your mini bike or go-kart's split sprocket,as it fits mini bike with 6 bolt hole pattern wheels and fits most mini bike or go kart racing.
- PACKAGE INCLUDED 1 x sprocket hub adapter, 1 x red split sprocket(420 chain 42T ,6 x screws,6 x nuts
- NOTE please check as much as possible to the item picture, model and size carefully before purchasing.Or leave us messages for assistance if you're not sure if the sprocket kit fits.
- See more on Amazon...
Brand: GREHUA | Manufacturer: GREHUA
See On Amazon #9
CNCMOTOK 25H 136Links Chain + 68T 68 Tooth Rear Sprocket,fit for 49CC Mini Small Sports Car Pocket Bike 2 Stroke Off-Road Motorcycle Chain Pinion Chain Drive Gear
Asin: B0978NMDVR | Ean: 0616430434461 | UPC: 616430434461
About The Chain：Combination Of A Very High Strength Base Material And An Exceptionally Hardwearing Surface Result In Significantly Increased Chainwheel Life.Chain Repeated Forging, Strict Control Of Materials To Ensure The Strength,Easy To Disassemble, Easy To Clean, Reusable..
About The Rear Sprocket:Their Advanced Tooth Profile, Concentricity And Accuracy Of Fit Provide Maximum Power Transfer And Long-Life..
Package Includes:1 X 25H 136Links Chain;1 X Rear Sprocket; 3X 25H Links ..
Features
- 25H 136 Links Chain + 68 Tooth Rear Sprocket,Fits for 2-stroke 49cc Pocket Bike Mini Bike.
- Package Includes:1 X 25H 136Links Chain;1 X Rear Sprocket; 3X 25H Links .
- About the chain Combination of a very high strength base material and an exceptionally hardwearing surface result in significantly increased chainwheel life.Chain repeated forging, strict control of materials to ensure the strength,easy to disassemble, easy to clean, reusable.
- About the Rear Sprocket:Their advanced tooth profile, concentricity and accuracy of fit provide maximum power transfer and long-life.
- See more on Amazon...
Brand: CNCMOTOK | Manufacturer: CNCMOTOK
See On Amazon #10
MRELC Motorcycle 420-13T Front Sprocket 17mm Compatible with 50cc 70cc 90cc 110cc 125cc 140cc15cc 160cc Lifan Loncin Dirt Bike
Asin: B096F2FM21 | Model: LL-109-13T | PartNumber: LL-109-13T | Ean: 0616430433938 | UPC: 616430433938
Material:High Quality, Stainless Steel Manufacturing, Good Corrosion Resistance, Heat Resistance;.
Package Includes:1 Sprocket 4 Screws And 2 Circlips..
Note:Please Verify Model Number And Size Prior To Ordering To Ensure This Is The Correct Part,420 Represents The Chain Model, 13T Is The Number Of Gears, And The Last Is The Size Of The Mounting Hole, You Can Buy It On Demand.
Size:Front Sprocket 420 13 Tooth 17Mm;Gear Inner Diameter:14Mm/0.0.55";(As The Picture Shows).
Features
- FIT:Compatible with 50cc 70cc 90cc 110cc 125cc Dirt Pit Bike Mini Bike ATV 4 Wheeler Moped125cc 140cc15cc 160cc Lifan Loncin Dirt Bike.
- SIZE:Front Sprocket 420 13 tooth 17mm;Gear inner diameter:14mm/0.0.55;(As the picture shows)
- Material:High quality, stainless steel manufacturing, good corrosion resistance, heat resistance;
- NOTE:Please verify model number and size prior to ordering to ensure this is the correct part,420 represents the chain model, 13T is the number of gears, and the last is the size of the mounting hole, you can buy it on demand
- Package includes:1 sprocket 4 screws and 2 circlips.
- See more on Amazon...
Brand: MRELC | Manufacturer: MRELC
See On Amazon #11
NiteRider Lumina Micro 650 Front Bike Light Sabre 110 Rear Bike Light Combo Pack, Black (7711)
Asin: B08F2H4QYZ | Model: 7711 | PartNumber: 7711 | Ean: 0702699077119 | UPC: 702699077119
Optimal Viz For Increased Visibility While Out On The Roadways. Cars And Motorcycles Are Incorporating Daytime Running Lights For Increased Daylight Visibility. And With Drivers More Distracted Than Ever, We Think Cyclists Should As Well.
Durable And Long-Lasting Rugged Design Of The Lumina Micro 650 With Dupont Fiberglass Reinforced Nylon Housing Provides Cyclists With The Most Durable, Reliable And Best Performing Lights In The Market. Rely Only On Quality Lighting Systems.
Low Battery Indicator Is Cleverly Designed Into The Power Button. Lit In Blue Indicates A Good Battery Level Remaining. Lit In Red Indicates That The Battery Level Is Below, Less Than 20% Remaining..
Important To Note That Niterider Uses This Key Feature After Assembly And Production To Prepare For Transport. The Light Is Set To Lock Mode At The Factory, Unlock Before Use..
Features
- lock mode feature keeps the lumina micro 650 headlight securely powered off during transport or storage. unlock / lock the light by simply holding the power button down for 8-10 seconds.
- important to note that niterider uses this key feature after assembly and production to prepare for transport. the light is set to lock mode at the factory, unlock before use.
- optimal viz for increased visibility while out on the roadways. cars and motorcycles are incorporating daytime running lights for increased daylight visibility. and with drivers more distracted than ever, we think cyclists should as well
- low battery indicator is cleverly designed into the power button. lit in blue indicates a good battery level remaining. lit in red indicates that the battery level is below, less than 20% remaining.
- durable and long-lasting rugged design of the lumina micro 650 with dupont fiberglass reinforced nylon housing provides cyclists with the most durable, reliable and best performing lights in the market. rely only on quality lighting systems
- See more on Amazon...
First Available: 08/06/2020
Brand: NiteRider | Manufacturer: NiteRider Lights
Dimensions: 1.75 x 9.00 x 4.75 inches | Weight: 0.44 pounds
Warranty: Limited lifetime warranty: Covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs
See On Amazon #12
Jeremywell #40 Roller Chain Sprocket B Type 1" Bore Hardened 12 Tooth
Asin: B08DDKLYMF | Model: 40BS12H | PartNumber: 40BS12H
Brand: Jeremywell | Manufacturer: Jeremywell
Dimensions: 1.00 x 4.00 x 6.00 inches | Weight: 0.22 pounds
See On Amazon #13
JINGKE 65 Teeth #35 Chain Rear Sprocket Compatible with 100cc 98cc 97cc 2.5hp Coleman CT100U Trail CK100 CC100X Baja Doodle Bug Blitz Dirt Bug Racer DB30 TrailMaster MB Storm Mini Bike Go Kart Drift
Asin: B0BJCXBZSF | Model: HLL-65T | PartNumber: HLL-65T | Ean: 0786552483309 | UPC: 786552483309
Product Dimensions： #35 Chain,Teeth: 65 Tooth/ Mounting Hole Distance (Center To Center, Bolt Hole Circle): 50.5Mm (1.99 Inch)/ Center Hole Diameter: 37Mm (1.46 Inch)/ Overall Diameter: 198Mm ( 7.8 Inch)/ Mounting Hole Diameter: 6.5Mm (0.26 Inch)X6..
Professional After-Sales：We Sell Professional Parts ，And Provide Free Technical Support. If You Have Any Problems Or Dissatisfaction After Receiving The Products, Please Contact Us Directly To Get New Replacement Or Return..
Package Includes:1*65Teeth Rear Sprocket，5*Master Link.
Features：Perfect Replacement For Your Old Or Broken Parts.Made Of High Quality Steel, Strong And Will Not Wear Out Easily, It Has A Long Service Life.
Features
- compatible with For 97cc 98cc 100cc 2.5hp 2.8hp Coleman Baja Hensim TrailMaster Realtre* Mini Bike Go Kart Drift Trike Profile. Compatible with: /Coleman (CT100U, CC100X, Trail 100) mini bike/Coleman (CK100, SK100) go kart/Baja Hensim (Doodle Bug, Blitz, Dirt Bug, Racer) DB30 mini bike/TrailMaster MB Storm mini bike
- Features Perfect replacement for your old or broken parts.Made of high quality steel, Strong and will not wear out easily, it has a long service life
- Product Dimensions #35 Chain,Teeth: 65 Tooth/ Mounting Hole Distance (center to center, bolt hole circle): 50.5mm (1.99 inch)/ Center Hole Diameter: 37mm (1.46 inch)/ Overall Diameter: 198mm ( 7.8 inch)/ Mounting Hole Diameter: 6.5mm (0.26 inch)x6.
- Package includes:1*65Teeth rear sprocket 5*master link
- Professional after-sales We sell professional parts and provide free technical support. If you have any problems or dissatisfaction after receiving the products, please contact us directly to get New Replacement or Return.
- See more on Amazon...
Brand: JINGKE | Manufacturer: JINGKE
See On Amazon #14
GREHUA Upgrade #35 Chain 60 Tooth Rear Drive Sprocket Cog for 98cc 3.5hp Coleman CT100U CC100X Baja Hensim Doodle Bug DB30 Motovox MBX10 MBX11 MM-B80 Classic 1000w Electric Mini Bike Go Kart Parts
Asin: B0BNPX3CKM | Model: GR-L60T-CT100 | PartNumber: GR-L60T-CT100
Playing An Important Role—The Rear Drive Chain Sprocket Is An Important Part Of The Drive System,Ans Make The Chain Drive More Stable, Higher Efficiency. In The Same Condition Of Front Sprocket Unchanged, Larger Rear Sprocket Can Increase Torque And Climbing Ability, The Smaller Rear Sprocket Can Increase Speed And Save Fuel.It Can Perfectly Replace The Old Original One..
Note—Please Check As Much As Possible To The Item Picture, Model And Size Carefully Before Purchasing.Or Leave Us Messages For Assistance If You're Not Sure If The Ct100u Chain Sprocket Fits..
Product Size—#35 Chain,Teeth: 60 Tooth/ Mounting Hole Distance (Center To Center, Bolt Hole Circle): 50Mm (2.0 Inch)/ Center Hole Diameter: 37Mm (1.46 Inch)/ Overall Diameter: 227Mm (8.94 Inch)/ Mounting Hole Diameter: 6Mm (0.26 Inch)X6..
High Quality Material And Easy To Install—The 60 Tooth #35 Chain Rear Drive Sprocket Uses The Combination Of Ultra-High Strength Substrate Material And Extremely Wear-Resistant Surface, Significantly Increases The Service Life Of Sprocket,Durable And Can Be Used For A Long Time.The Chain Sprocket Has 60 Teeth,Sized For #35 Chain And It Has 6 Inner Mounting Holes,Weight Reduction Design And Lightweight For Easy To Install And Use..
Features
- FITMENT fit for 98cc 3.0HP Colema* CT100U CC100X mini bike parts,Colema* CK100 SK100 go kart,compatibility:Baja Motorsports Doodle Bug DB30,Hensim Doodle Bug DB30,Motovox MBX10 MBX11,Monste* Moto/Mega Moto Classic 80cc MM-B80 /105cc MM-B105/1000w electric mini bike drift trike profile 6 Hole.
- HIGH QUALITY MATERIAL AND EASY TO INSTALL the 60 tooth #35 chain rear drive sprocket uses the combination of ultra-high strength substrate material and extremely wear-resistant surface, significantly increases the service life of sprocket,durable and can be used for a long time.The chain sprocket has 60 teeth,sized for #35 chain and it has 6 inner mounting holes,weight reduction design and lightweight for easy to install and use.
- PLAYING AN IMPORTANT ROLE the rear drive chain sprocket is an important part of the drive system,ans make the chain drive more stable, higher efficiency. In the same condition of front sprocket unchanged, larger rear sprocket can increase torque and climbing ability, the smaller rear sprocket can increase speed and save fuel.It can perfectly replace the old original one.
- PRODUCT SIZE #35 Chain,Teeth: 60 Tooth/ Mounting Hole Distance (center to center, bolt hole circle): 50mm (2.0 inch)/ Center Hole Diameter: 37mm (1.46 inch)/ Overall Diameter: 227mm (8.94 inch)/ Mounting Hole Diameter: 6mm (0.26 inch)x6.
- NOTE please check as much as possible to the item picture, model and size carefully before purchasing.Or leave us messages for assistance if you're not sure if the ct100u chain sprocket fits.
- See more on Amazon...
Brand: GREHUA | Manufacturer: GREHUA
See On Amazon #15
FVRITO 40 Tooth #35 Rear Drive Chain Sprocket for 97cc 98cc 2.8Hp Motovox MBX10 MBX11 Monster Moto 80cc Coleman CT100U Trail CK100 Baja Doodle Bug DB30 Taotao GK80 Mini Bike Go Kart Drift Trike Parts
Asin: B0CJ4TFL7X | Model: LL006-40T-S | PartNumber: LL006-40T-S
【Size】: Mounting Hole Distance (Across): 0.55"(14 Mm) Mounting Hole Diameter: 0.26"(6.8Mm), Mounting Holes: 12 Toothtooth, Tooth Thickness: 0.04" (1Mm).
【Note】 Due To The Heat Generated During Use, The Sprocket May Show Different Color From Itself.The Size Of The Sprocket's Mounting Holes Is The Key To Selecting A Proper One .Please Feel Free To Leave Us Message If You Have Any Questions.".
Package Content】1 X Sprocket, 6 X Screw, 6 X Bolt.
【Feature】The Small Alloy Chain Sprocket Can Improve Riding Speed By Higher Front-To-Rear Gear Ratio. The 12-Hole Mounting Hole Design Gives It More Adaptability.".
Features
- Fitment For 97cc 98cc 100cc 2.5hp 2.8hp 3.0hp Coleman CT100U CC100X RB100 trail 100 Mini Bike, Coleman CK100 SK100 Go Kart, Baja Motorsports Doodle Bug DB30 (Blitz, Dirt Bug, Racer), Motovox MBX10 MBX11, Mega Moto Classic 80cc MM-B80 MM-B105 Mini Bike, Monster Moto 1000w Electric Mini Bike, Realtre* RT100 105cc Mini Bike, Mega Moto MM-K80R, TaoTao GK80 Gas Go-Kart
- Feature The small alloy chain sprocket can improve riding speed by higher front-to-rear gear ratio. The 12-hole mounting hole design gives it more adaptability.
- Size : Mounting hole distance (across): 0.55(14 mm) Mounting Hole Diameter: 0.26(6.8mm), Mounting holes: 12 ToothTooth, Tooth Thickness: 0.04 (1mm)
- Package Content 1 X Sprocket, 6 X Screw, 6 X Bolt
- Note Due to the heat generated during use, the sprocket may show different color from itself.The size of the sprocket's mounting holes is the key to selecting a proper one .Please feel free to leave us message if you have any questions.
- See more on Amazon...
Brand: FVRITO | Manufacturer: FVRITO
See On Amazon #16
Hollywood Racks HR1400 Sport Rider SE 4-Bike Platform Style Hitch Mount Rack (2-Inch Receiver)
Asin: B000QJC4AY | Model: HR1400Z | PartNumber: HR1400Z | Ean: 0014658014005 | UPC: 014658014005
Includes Keyed Alike Locking Hitch Pin With 8' Security Cable To Prevent Rack Sway, And Locking Frame Hooks To Deter Theft.
Not To Be Used On Any Trailer, Fifth Wheel Or Towed Vehicle – Any Trailer Or Trailered Vehicle Has A Slight Side To Side Motion That's Very Low Frequency (1 To 1-1/2 Times Per Second) That Fatigues The Steel From Which The Racks Are Manufactured.
Features Patented "No Wobble-No Tools" Hitch Tightening System | Easily Fold The Rack Flat Against The Car When Not In Use, Or Tilt It Down For Easy Cargo Door Access.
Specifications: Weight – 85 Lbs. | Weight Limit – Max 50 Lbs. Per Bike | Hitch Size – 2” Only (Do Not Use A 1 ¼” – 2” Hitch Adapter) | Max Bike Wheelbase – 60” (72” Long Wheelbase Kits Available, Not Included) | Max Tire Width – 3”.
Features
- Please refer to product pictures for this item s dimensions
- Specifications: Weight 85 lbs. | Weight limit Max 50 lbs. per bike | Hitch size 2 Only (Do not use a 1 2 hitch adapter) | Max bike wheelbase 60 (72 long wheelbase kits available, not included) | Max tire width 3
- Includes keyed alike locking hitch pin with 8' security cable to prevent rack sway, and locking frame hooks to deter theft
- Features patented No Wobble-No Tools hitch tightening system | Easily fold the rack flat against the car when not in use, or tilt it down for easy cargo door access
- Not to be used on any trailer, fifth wheel or towed vehicle Any trailer or trailered vehicle has a slight side to side motion that's very low frequency (1 to 1-1/2 times per second) that fatigues the steel from which the racks are manufactured
- See more on Amazon...
First Available: 05/11/2007
Brand: Hollywood Racks | Manufacturer: Hollywood Racks
Dimensions: 10.00 x 27.00 x 36.00 inches | Weight: 85.00 Pounds
Warranty: Limited Lifetime Warranty on manufacturer defects
See On Amazon #17
uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L22XD14 Stainless Steel,Shaft Coupler Connector for 3D Printers, Motor Accessories,2pcs
Asin: B07P5YZKY5
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 8mm to 8mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 1.97 x 1.18 inches
See On Amazon #18
OCTOPUS Go Kart Live Axle Steel Sprocket 60 Tooth Fits #40#41#420 Chain with 1 Bore 1/4" Keyway Sprocket Only
Asin: B073G918TY | Model: 130485 | PartNumber: 130485 | Ean: 0639072130485 | UPC: 639072130485
✅ Perfect Fit: Please Reference Our Compatibility List Below To Ensure Our Parts Are Compatible With Your Component(S). Compatible With Yerf-Dog And Murray Go Karts Bikes And Utv Vehicles..
✅ Warranty & Care: Reliable Customer Service Is Our #1 Priority. Here At Octopus, We Readily Offer A 30-Day Money Back Guaranteed And 90-Day Limited Manufacturer’S Warranty. Which Covers Manufacturing Defects. For Maximum Usage, We Suggest Avoiding Canned Lubricant And Using Grease Or Oil..
✅ Specifications: Teeth: 60 Tooth / Material: Steel / Clearance: 1” Bore / Outer Diameter: 9.5” / Bore Outer Diameter: 1” / Bore Inner Diameter: 1” / Keyholes: 3 / Pre-Lubricated Treated Steel.
Features
- ✅ INCLUDES: 1 60 Tooth Black Steel Live Axle Sprocket with Bore
- ✅ SPECIFICATIONS: Teeth: 60 Tooth / Material: Steel / Clearance: 1 Bore / Outer Diameter: 9.5 / Bore Outer Diameter: 1 / Bore Inner Diameter: 1 / Keyholes: 3 / Pre-lubricated Treated Steel
- ✅ PERFECT FIT: Please Reference Our Compatibility List Below to Ensure Our Parts are Compatible with Your Component(s). Compatible with Yerf-Dog and Murray Go Karts Bikes and UTV vehicles.
- ✅ WARRANTY & CARE: Reliable Customer Service Is Our #1 Priority. Here at Octopus, We Readily Offer a 30-Day Money Back Guaranteed and 90-Day Limited Manufacturer s Warranty. Which Covers Manufacturing Defects. For Maximum Usage, We Suggest Avoiding Canned Lubricant and Using Grease or Oil.
- See more on Amazon...
Brand: OCTOPUS | Manufacturer: KOB
See On Amazon #19
Hollywood Racks, Trail Rider, Hitch Mount Rack, 1-1/4'' and 2'', Bikes: 2
Asin: B00IHR0H1K | Model: HR200Z | PartNumber: HR200Z | Ean: 0800265777910, 0014658102009 | UPC: 800265777910, 014658102009
Transport Your Bike: These Bicycle Car Racks Are Designed To Keep Up To 2 Bikes Secure During Transport. Our Bike Mount For A Car Has A Max Capacity Of 45 Lbs Per Bike And Does Not Support E-Bikes. Kids Bikes, Ladies' Frame Bikes, And Some Mountain Bikes May Require A Top Tube Adaptor..
Designed For Simple Storage: With Foldable Wheel Support Tubes And Folding Bike Support Arms For Easy Storage In The Garage Or Other Part Of Your Home, This Bike Rack Hitch Weighs Only 34 Pounds, So It Is Convenient Whether Or Not You're Traveling!.
Always Convenient: With Locking Hooks To Hold Frames And Protective Padding, Our Bicycle Rack Hitch Carrier Works With 1 ¼” And 2” Hitches And Folds Down To Access The Trunk. Just Drop The Bike Into The Adjustable Wheel Holders And Head Off!.
High-Quality And Durable: Crafted With Sturdy Alloy Steel, This Bike Rack For An Suv Or Car Will Keep Your Bikes Safe And Secure No Matter Your Destination. Our Bike Hitch Rack Has Locking Bike Frame Hooks To Deter Theft With A Keyed Alike Hitch Pin..
Features
- Simple, Strong, Secure: Keep your bike safe during transport with the Hollywood Racks Trail Rider Hitch Mount Bike Rack! This hitch bike rack for 2 bikes is the perfect bicycle rack for a car, and our bike racks are made for convenience and strength.
- High-Quality and Durable: Crafted with sturdy alloy steel, this bike rack for an SUV or car will keep your bikes safe and secure no matter your destination. Our bike hitch rack has locking bike frame hooks to deter theft with a keyed alike hitch pin.
- Transport Your Bike: These bicycle car racks are designed to keep up to 2 bikes secure during transport. Our bike mount for a car has a max capacity of 45 lbs per bike and does not support E-Bikes. Kids bikes, ladies' frame bikes, and some mountain bikes may require a top tube adaptor.
- Always Convenient: With locking hooks to hold frames and protective padding, our bicycle rack hitch carrier works with 1 and 2 hitches and folds down to access the trunk. Just drop the bike into the adjustable wheel holders and head off!
- Designed for Simple Storage: With foldable wheel support tubes and folding bike support arms for easy storage in the garage or other part of your home, this bike rack hitch weighs only 34 pounds, so it is convenient whether or not you're traveling!
- See more on Amazon...
First Available: 01/31/2014
Brand: Hollywood Racks | Manufacturer: Hollywood Racks
Dimensions: 8.00 x 35.00 x 13.00 inches | Weight: 34.00 pounds
Warranty: Limited Lifetime Warranty on manufacturer defects
See On Amazon #20
Carbhub 9T Jackshaft Sprocket 5/8" 41/420 Manco Go Kart Mini Bike, 9 Tooth 5/8" Jack Shaft Replaces Manco/American Sportworks part# 8720-1125
Asin: B079FFDHN4 | Ean: 0715020952634, 0716955896673 | UPC: 715020952634, 716955896673
Package List: 1X 9-Tooth Bore Sprocket.
Compatible With: 9 Tooth 5/8" Bore Sprocket For #40/41/420 Chain.
Features
- Replaces Manco / American Sportworks part# 8720- 1125
- Compatible with: 9 Tooth 5/8 bore sprocket for #40/41/420 chain
- Package list: 1x 9-Tooth bore sprocket
- See more on Amazon...
Brand: Carbhub | Manufacturer: Carbour
See On Amazon
Looking For Something Else?
Search