Adafruit Motor/Stepper/Servo Shield for Arduino v2.3 Kit
Asin: B00PUTH3B0 | Model: 1438 | PartNumber: 1438 | Ean: 0702658303396 | UPC: 702658303396
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Instead Of A L293d Darlington Driver, We Now Have The Tb6612 Mosfet Driver: With 1.2A Per Channel And 3A Peak Current Capability. It Also Has Much Lower Voltage Drops Across The Motor So You Get More Torque Out Of Your Batteries, And There Are Built-In Flyback Diodes As Well..
As Of 3/21/2014 We Are Shipping Motor Shields With The Terminal Blocks, And Power Jumper Pre-Soldered On. You'll Still Need To Do A Little Soldering To Put On The Shield-Headers (Or Stacking Headers) But It Should Be Even Easier And Faster To Get Started!.
Instead Of Using A Latch And The Arduino's Pwm Pins, We Have A Fully-Dedicated Pwm Driver Chip Onboard. This Chip Handles All The Motor And Speed Controls Over I2c. Only Two Pins (Sda & Scl) Are Required To Drive The Multiple Motors, And Since It's I2c You Can Also Connect Any Other I2c Devices Or Shields To The Same Pins. This Also Makes It Drop-In Compatible With Any Arduino, Such As The Uno, Due, Leonardo And Mega R3..
Completely Stackable Design: 5 Address-Select Pins Means Up To 32 Stackable Shields: That's 64 Steppers Or 128 Dc Motors! What On Earth Could You Do With That Many Steppers? I Have No Idea But If You Come Up With Something Send Us A Photo Because That Would Be A Pretty Glorious Project..
Features
- New version 2.3!
- Completely stackable design: 5 address-select pins means up to 32 stackable shields: that's 64 steppers or 128 DC motors! What on earth could you do with that many steppers? I have no idea but if you come up with something send us a photo because that would be a pretty glorious project.
- Instead of a L293D darlington driver, we now have the TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well.
- Instead of using a latch and the Arduino's PWM pins, we have a fully-dedicated PWM driver chip onboard. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or shields to the same pins. This also makes it drop-in compatible with any Arduino, such as the Uno, Due, Leonardo and Mega R3.
- As of 3/21/2014 we are shipping motor shields with the terminal blocks, and power jumper pre-soldered on. You'll still need to do a little soldering to put on the shield-headers (or stacking headers) but it should be even easier and faster to get started!
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Weight: 0.00 Pounds
See On Amazon Similar To Adafruit Motor Stepper Servo Shield
#1
Adafruit Assembled Data Logging Shield for Arduino
Asin: B00OKCRZ7A | Model: 100532 | PartNumber: 100532 | Ean: 0793936891735, 0701851951885, 0717520031932 | UPC: 717520031932, 793936891735, 701851951885
Prototyping Area For Soldering Connectors, Circuitry Or Sensors.
Requires Soldering Of Header Pins.
Works With Arduino Uno, Duemilanove, Diecimila, Leonardo Or Adk/Mega R3 Or Higher. Adk/Mega R2 Or Lower Are Not Supported..
Adafruit Libraries And Example Code For Both Sd And Rtc Mean You Can Get Going Quickly.
Features
- On board Real time clock (RTC) keeps the time going even when the Arduino is unplugged. Note: The RTC requires a small coin cell battery (not included). The board will still operate without the coin cell battery. Once installed the RTC battery will last for years.
- Adafruit libraries and example code for both SD and RTC mean you can get going quickly
- Prototyping area for soldering connectors, circuitry or sensors
- Works with Arduino UNO, Duemilanove, Diecimila, Leonardo or ADK/Mega R3 or higher. ADK/Mega R2 or lower are not supported.
- Requires soldering of header pins
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.00 x 3.00 x 2.00 inches | Weight: 50.00 Grams
See On Amazon #2
Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board
Asin: B00VY32VU4 | Model: COMINU039720 | PartNumber: COMINU039720 | Ean: 0743724368697, 8349396200871, 0748347529180, 7445803052208, 0717520029441, 0600346599383 | UPC: 717520029441, 600346599383, 748347529180, 743724368697
Runs At 2.7V-5V Logic. The Motor & Logic Voltage Are Separate..
Good For Motor Voltages From 4.5V Up To 13.5V.
2 Full H-Bridges Means You Can Drive 2-4 Solenoids (Only Two Can Be Active), Two Dc Motors Bi-Directionally, Or One Stepper Motor..
Features
- TB6612 motor driver with 1.2A per channel
- 2 full H-bridges means you can drive 2-4 solenoids (only two can be active), two DC motors bi-directionally, or one stepper motor.
- Runs at 2.7V-5V logic. The motor & logic voltage are separate.
- Good for motor voltages from 4.5V up to 13.5V
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.00 x 2.00 x 1.00 inches | Weight: 0.13 Pounds
See On Amazon #3
Adafruit (PID 3387) 9-DOF Accel/Mag/Gyro+Temp Breakout Board - LSM9DS1
Asin: B06XH5Y6DC | Model: NA | PartNumber: NA | Ean: 0717520031147 | UPC: 717520031147
Magnetometer: �4/�8/�12/�16 Gauss Ranges..
I2c And Spi Interface. 3-5Vdc.
Gyroscope: �245/�500/�2000 Dps Ranges..
Accelerometer: �2/�4/�8/�16 G (No �6 G Range)..
Features
- LSM9DS1 9-DOF Accel/Mag/Gyro+Temp Breakout Board
- Accelerometer: 2/ 4/ 8/ 16 g (no 6 g range).
- Magnetometer: 4/ 8/ 12/ 16 gauss ranges.
- Gyroscope: 245/ 500/ 2000 dps ranges.
- i2c and SPI interface. 3-5VDC
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.00 x 3.00 x 2.00 inches | Weight: 0.01 pounds
See On Amazon #4
Adafruit (PID 2975) Parts Pal. The ultimate companion for an entry-level maker learning electronics
Asin: B01HN8IVKM | Model: 6454510 | PartNumber: 6454510 | Ean: 0743724369137, 0717520029120 | UPC: 743724369137, 717520029120
Comes In A Convenient Plastic Storage Box With A Latch!.
Contains Leds, Passive, Transistors And Switches.
Features
- The ultimate companion for an entry-level maker learning electronics
- Contains LEDs, Passive, Transistors and Switches
- Comes in a convenient plastic storage box with a latch!
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 2.00 x 4.00 x 3.00 Inches | Weight: 0.38 Pounds
See On Amazon #5
Adafruit Breakout PWM/Servo Shield 16 Channel 12 Bit
Asin: B00I4WMOGE | Model: 100409 | PartNumber: 100409 | Ean: 0700358508837, 0701980281303, 0700253565003 | UPC: 701980281303, 700253565003, 700358508837
First Available: 08/26/2014
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.15 Pounds
See On Amazon #6
Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
Asin: B00TIY5JM8 | Model: 2348 | PartNumber: 2348
Ean: 5269692665835, 0717520029458, 5060627393010, 0711978444085, 0720189973154, 0748347527568, 3700386523489, 4139052021650
UPC: 711978444085, 720189973154, 748347527568, 717520029458
Up To 2 Stepper Motors (Unipolar Or Bipolar) With Single Coil, Double Coil, Interleaved Or Micro-Stepping..
Big Terminal Block Connectors To Easily Hook Up Wires (18-26Awg) And Power.
Up To 4 Bi-Directional Dc Motors With Individual 8-Bit Speed Selection (So, About 0.5% Resolution).
Features
- 4 H-Bridges: TB6612 chipset provides 1.2A per bridge with thermal shutdown protection, internal kickback protection diodes.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
- Big terminal block connectors to easily hook up wires (18-26AWG) and power
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.00 x 3.00 x 2.00 inches | Weight: 0.07 pounds
See On Amazon #7
2327 - Raspberry Pi PWM Servo Hat Development Board
Asin: B00SI1SPHS | Model: ADA-2327 | PartNumber: ADA-2327
Ean: 7107565753938, 3700386523274, 4573252930433, 0748347527582, 4547634094341, 5053839113309, 0702658303754, 7107562152024, 7107561313242, 7107564964922, 0711978444054
UPC: 702658303754, 711978444054, 748347527582
For Use With Raspberry Pi Model A+ Or B+, Can Be Used With The Model A Or B If You Use A Tall 2X13 Header Instead Of The Included 2X20..
Please Note! This Kit Does Not Come With Raspberry Pi, Servos, Or Required 5V Power Supply..
It Can Also Do Pwm Up To 1.6 Khz With 12 Bit Precision, All Completely Free-Running..
Features
- The Adafruit 16-Channel 12-bit PWM/Servo HAT will drive up to 16 servos or PWM outputs over I2C with only 2 pins. The on-board PWM controller will drive all 16 channels simultaneously with no additional Raspberry Pi processing overhead. What's more, you can stack up to 62 of them to control up to 992 servos - all with the same 2 pins!
- It can also do PWM up to 1.6 KHz with 12 bit precision, all completely free-running.
- For use with Raspberry Pi Model A+ or B+, can be used with the Model A or B if you use a tall 2x13 header instead of the included 2x20.
- Please note! This kit does not come with Raspberry Pi, servos, or required 5V power supply.
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.98 x 5.91 x 3.94 inches | Weight: 0.04 pounds
See On Amazon #8
Adafruit 4502 Adafruit ISM330DHCX - 6 DoF IMU - Accelerometer and Gyroscope - Stemma QT/Qwiic
Asin: B084H3KC4B
Accelerometer: ±2/±4/±8/±16 G At 1.6 Hz To 6.7Khz Update Rate..
Gyroscope: ±125/±250/±500/±1000/±2000/±4000 Dps At 12.5 Hz To 6.7 Khz.
This Imu Sensor Has 6 Degrees Of Freedom.
Features
- ST ISM330DHCX: an industrial quality Accelerometer+Gyroscope 6-DOF IMUs (inertial measurement unit) from ST.
- This IMU sensor has 6 degrees of freedom
- accelerometer: 2/ 4/ 8/ 16 g at 1.6 Hz to 6.7KHz update rate.
- gyroscope: 125/ 250/ 500/ 1000/ 2000/ 4000 dps at 12.5 Hz to 6.7 KHz
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Weight: 0.10 pounds
See On Amazon #9
Adafruit Shield stacking headers for Arduino (R3 Compatible) [ADA85]
Asin: B00LB76EVU | Model: 85 | PartNumber: 85 | Ean: 5054814587368, 5055851288485, 0711978444689, 2050004690934, 0748347523119, 6064254858460 | UPC: 748347523119, 711978444689
Multiple Pin Counts.
Incredibly Simple And Incredibly Useful.
10.5Mm Long Legs.
Features
- Stackable to add shields
- 10.5mm long legs
- Multiple pin counts
- Incredibly simple and incredibly useful
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.20 x 3.94 x 2.76 inches | Weight: 0.01 pounds
See On Amazon #10
Adafruit Proto Shield for Arduino Kit - Stackable Version R3
Asin: B00N426HCG | Model: 8541582350 | PartNumber: 8541582350 | Ean: 0720189972829 | UPC: 720189972829
Surface-Mount Chip Area Holds Up To 14 Soic Size Parts.
Compatible With Tiny Breadboards.
Updated For The Most Compatibility With Arduin.
Features
- Kit allows you to choose how you want to configure your shield
- Updated for the most compatibility with Arduin
- Surface-mount chip area holds up to 14 SOIC size parts
- Compatible with tiny breadboards
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.40 x 2.50 x 2.50 Inches | Weight: 0.04 Pounds
See On Amazon #11
Adafruit 16-Channel 12-bit PWM/Servo Driver - I C Interface - PCA9685
Asin: B00E4WEXO4 | Model: 815 | PartNumber: 815 | Ean: 5054242029478
Reverse Polarity Protection On The Terminal Block Input.
This Product Comes With A Fully Tested And Assembled Breakout As Well As 4 Pieces Of 3X4 Male Straight Header (For Servo/Led Plugs), A 2-Pin Terminal Block (For Power) And A Piece Of 6-Pin 0.1" Header (To Plug Into A Breadboard). A Little Light Soldering Will Be Required To Assemble And Customize The Board By Attaching The Desired Headers But It Is A 15 Minute Task That Even A Beginner Can Do. You May Also Use Right-Angle 3X4 Headers.
Dimensions (No Headers Or Terminal Block) 2.5" X 1" X 0.1" (62.5Mm X 25.4Mm X 3Mm) Weight (No Headers Or Terminal Block): 5.5Grams Weight (With 3X4 Headers & Terminal Block): 9Grams.
When We Saw This Chip, We Quickly Realized What An Excellent Add-On This Would Be. Using Only Two Pins, Control 16 Free-Running Pwm Outputs! You Can Even Chain Up 62 Breakouts To Control Up To 992 Pwm Outputs (Which We Would Really Like To See Since It Would Be Glorious).
Features
- It's an I C-controlled PWM driver with a built in clock. That means that, unlike the TLC5940 family, you do not need to continuously send it signal tying up your microcontroller, it's completely free running!
- When we saw this chip, we quickly realized what an excellent add-on this would be. Using only two pins, control 16 free-running PWM outputs! You can even chain up 62 breakouts to control up to 992 PWM outputs (which we would really like to see since it would be glorious)
- Reverse polarity protection on the terminal block input
- Dimensions (no headers or terminal block) 2.5 x 1 x 0.1 (62.5mm x 25.4mm x 3mm) Weight (no headers or terminal block): 5.5grams Weight (with 3x4 headers & terminal block): 9grams
- This product comes with a fully tested and assembled breakout as well as 4 pieces of 3x4 male straight header (for servo/LED plugs), a 2-pin terminal block (for power) and a piece of 6-pin 0.1 header (to plug into a breadboard). A little light soldering will be required to assemble and customize the board by attaching the desired headers but it is a 15 minute task that even a beginner can do. You may also use right-angle 3x4 headers
- See more on Amazon...
Brand: Adafruit | Manufacturer: ADAFRUIT INDUSTRIES
Weight: 0.00 Pounds
See On Amazon #12
Adafruit "Music Maker MP3 Shield for Arduino (MP3/Ogg/WAV.)
Asin: B00OKCPE50 | Model: 100603 | PartNumber: 100603 | Ean: 3700386517907, 0701851952585, 0720189972997 | UPC: 720189972997, 701851952585
7 Extra Gpio's That Can Be Written Or Read Through The Arduino Library For Reading Buttons Or Lighting Leds.
Built In Midi Synth/Drum Machine With Dozens Of Instruments.
Plenty Of Optional Breakouts For Pins Like The Card-Detect And Microphone Input.
Full 3.3/5V Level Shifting For Sd And Mp3 Chipsets.
Works With Arduino Uno, Mega, Or Leonardo.
Microsd Card Socket, For Any Fat16/Fat32 Formatted Sd Card From 64Mb Or Greater..
Stereo Audio Out With Proper Audio Filter Caps And Ground Reference So It Can Be Safely Connected Directly To Headphones, A Stereo System Or Other Powered Speakers.
Features
- Features the VS1053B codec chip - decodes Ogg Vorbis, MP3/MP2/MP1, MP4, AAC, WMA, FLAC, WAV/PCM, MIDI. Encodes Ogg or WAV/PCM
- Stereo audio out with proper audio filter caps and ground reference so it can be safely connected directly to headphones, a stereo system or other powered speakers
- 7 extra GPIO's that can be written or read through the Arduino Library for reading buttons or lighting LEDs
- MicroSD card socket, for any FAT16/FAT32 formatted SD card from 64Mb or greater.
- Full 3.3/5V level shifting for SD and MP3 chipsets
- Works with Arduino Uno, Mega, or Leonardo
- Built in MIDI synth/drum machine with dozens of instruments
- Plenty of optional breakouts for pins like the card-detect and microphone input
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit Industries
Weight: 0.02 pounds
See On Amazon #13
Adafruit 4201 Airlift ESP32 WiFi Co-Processor Breakout Board
Asin: B07Z587RBF | Model: 4201 | PartNumber: 4201
Send Basic But Powerful Socket-Based Commands Over 8Mhz Spi For High Speed Data Transfer.
Fully Assembled And Tested, Pre-Programmed With Esp32 Spi Wifi Co-Processor Firmware.
Works Great With Circuitpython, A Samd51/Cortex M4 Minimum Required Since We Need A Bunch Of Ram.
A Tri-State Chip For Mosi So You Can Share The Spi Bus With Other Devices.
Features
- ESP32 module on a PCB with level shifting circuitry
- A tri-state chip for MOSI so you can share the SPI bus with other devices
- Send basic but powerful socket-based commands over 8MHz SPI for high speed data transfer
- Works great with CircuitPython, a SAMD51/Cortex M4 minimum required since we need a bunch of RAM
- Fully assembled and tested, pre-programmed with ESP32 SPI WiFi co-processor firmware
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Weight: 0.03 Pounds
See On Amazon #14
Adafruit (PID 815 16-Channel 12-bit PWM/Servo Driver - I2C Interface - PCA9685
Asin: B01G61MZF4 | Model: ADA-0815 | PartNumber: ADA-0815 | Ean: 0717520028826 | UPC: 717520028826
This Product Comes With A Fully Tested And Assembled Breakout As Well As 4 Pieces Of 3X4 Male Straight Header (For Servo/Led Plugs), A 2-Pin Terminal Block (For Power) And A Piece Of 6-Pin 0.1" Header (To Plug Into A Breadboard). A Little Light Soldering Will Be Required To Assemble And Customize The Board By Attaching The Desired Headers But It Is A 15 Minute Task That Even A Beginner Can Do..
Some Soldering Required.
Includes Breakout And Headers.
5V Compliant.
Features
- PCA9685 PWM driver
- 5V compliant
- This product comes with a fully tested and assembled breakout as well as 4 pieces of 3x4 male straight header (for servo/LED plugs), a 2-pin terminal block (for power) and a piece of 6-pin 0.1 header (to plug into a breadboard). A little light soldering will be required to assemble and customize the board by attaching the desired headers but it is a 15 minute task that even a beginner can do.
- Includes Breakout and headers
- Some soldering required
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.00 x 3.00 x 2.00 inches
See On Amazon #15
Adafruit Accessories Stepper Motor NEMA17 12V 350mA
Asin: B00EYIFW70 | Model: 324 | PartNumber: 324 | Ean: 0700358509025, 0701851952387, 0700604229967 | UPC: 700358509025, 700604229967, 701851952387
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 pounds
See On Amazon #16
Adafruit Small Reduction Stepper Motor - 5VDC 32-Step 1/16 Gearing [ADA858]
Asin: B01BMRR0FM | Model: 4332013268 | PartNumber: 4332013268 | Ean: 0600346599345 | UPC: 600346599345
32 Step Per Revolution; 1/16 Reduction Gear Set.
Flat Shaft To Easily Attach Stuff To It With A Set-Screw.
Built In Mounting Plate With Two Mounting Holes.
Features
- Great first stepper motor, good for small projects and experimenting with steppers
- Built in mounting plate with two mounting holes
- 32 step per revolution; 1/16 reduction gear set
- Flat shaft to easily attach stuff to it with a set-screw
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 9.84 x 1.10 x 2.83 Inches
See On Amazon #17
Adafruit Small Reduction Stepper Motor - 12VDC 32-Step 1/16 Gearing
Asin: B00I0EB4RG | Model: 918 | PartNumber: 918 | Ean: 0604697999410 | UPC: 604697999410
The Shaft Is Flattened So Its Easy To Attach Stuff To It With A Set-Screw..
The Gearing Has A Few Side Effects Which Are Important To Note. First, You Can Turn The Stepper By Hand But Not As Smoothly As An Un-Geared Stepper. It Also Means You Shouldn't Use Interleaved Or Micro-Stepping To Control Or It Will Take Forever To Turn. Instead Use Single Or Double Stepping..
A Perfect First Stepper Motor And Works Well With The Motor Shield For Arduino..
There Are Only 32 Step (11.25 Degree) Per Revolution, And Inside Is A 1/16 Reduction Gear Set. (Actually Its 1/16.032 But For Most Purposes 1/16 Is A Good Enough Approximation) What This Means Is That There Are Really 32*16.032 Steps Per Revolution = 513 Steps!.
Features
- This is a great first stepper motor, good for small projects and experimenting with steppers. This uni-polar motor has a built in mounting plate with two mounting holes.
- There are only 32 step (11.25 degree) per revolution, and inside is a 1/16 reduction gear set. (Actually its 1/16.032 but for most purposes 1/16 is a good enough approximation) What this means is that there are really 32*16.032 steps per revolution = 513 steps!
- The shaft is flattened so its easy to attach stuff to it with a set-screw.
- A perfect first stepper motor and works well with the Motor Shield for Arduino.
- The gearing has a few side effects which are important to note. First, you can turn the stepper by hand but not as smoothly as an un-geared stepper. It also means you shouldn't use interleaved or micro-stepping to control or it will take forever to turn. Instead use single or double stepping.
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.57 x 9.84 x 2.95 inches
See On Amazon #18
Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board
Asin: B09D1LXCBG | Ean: 0697333050309 | UPC: 697333050309
You Can Drive 2-4 Solenoids (Only Two Can Be Active At A Time, On Opposite Bridges).
Skill Level: Component Or Part.
Size: 27Mm X 19Mm X 3Mm / 1.1" X 0.7" X 0.1".
Features
- Current Limit: 1.2A
- Size: 27mm x 19mm x 3mm / 1.1 x 0.7 x 0.1
- You can drive 2-4 solenoids (only two can be active at a time, on opposite bridges)
- Skill Level: Component or Part
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit Industries
Dimensions: 0.10 x 1.10 x 0.70 Inches | Weight: 0.06 Pounds
See On Amazon #19
Adafruit Motor party add-on pack for Arduino [ADA171]
Asin: B00XW2KY22 | Model: ADA171 | PartNumber: ADA171 | Ean: 0711978444887 | UPC: 711978444887
Brand: Adafruit | Manufacturer: Adafruit
See On Amazon
Looking For Something Else?
Search