Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board
Asin: B00VY32VU4 | Model: COMINU039720 | PartNumber: COMINU039720 | Ean: 0743724368697, 8349396200871, 0748347529180, 7445803052208, 0717520029441, 0600346599383 | UPC: 717520029441, 600346599383, 748347529180, 743724368697
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Runs At 2.7V-5V Logic. The Motor & Logic Voltage Are Separate..
Good For Motor Voltages From 4.5V Up To 13.5V.
2 Full H-Bridges Means You Can Drive 2-4 Solenoids (Only Two Can Be Active), Two Dc Motors Bi-Directionally, Or One Stepper Motor..
Features
- TB6612 motor driver with 1.2A per channel
- 2 full H-bridges means you can drive 2-4 solenoids (only two can be active), two DC motors bi-directionally, or one stepper motor.
- Runs at 2.7V-5V logic. The motor & logic voltage are separate.
- Good for motor voltages from 4.5V up to 13.5V
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.00 x 2.00 x 1.00 inches | Weight: 0.13 pounds
See On Amazon Similar To Adafruit TB6612 1.2A DC Stepper
#1
Teyleten Robot TB6612FNG Dual DC Stepper Motor Driver Module 1.2A Peak 3.2A Better Than L298N(Pack of 3)
Asin: B08J3S6G2N | Ean: 8425553720601
Input Voltage: 2.7 V – 10.8 V Output Current Of Single H-Bridge: 1.5A.
Can Drive Two Dc Deceleration Motors,Built In Over-Current Protection, Short-Circuit Protection, Under Voltage Locking And Over Temperature Protection,With Low Power Sleep Mode..
Size: 18 * 21Mm.
Features
- pin is black
- Size: 18 * 21mm
- Input voltage: 2.7 V 10.8 V Output current of single H-bridge: 1.5A
- can drive two DC deceleration motors,built in over-current protection, short-circuit protection, under voltage locking and over temperature protection,with low power sleep mode.
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.12 x 0.83 x 0.71 Inches
See On Amazon #2
Teyleten Robot 5pcs ULN2003 28BYJ 48 5V 4-Phase Stepper Motor with 5V Stepper Drive Board for Arduino PI PIC Raspberry Pi
Asin: B08HCS369F | Model: ULN2003+28BYJ-48 | PartNumber: ULN2003+28BYJ-48 | Ean: 8425520537799
It Also Can Be Connected As 2 Phase To Use.
Diameter: 27Mm;Voltage: 5V; 12V;Step Angle: 5.625 X 1/64;Reduction Ratio: 1/64.
Features
- Gear Stepper Motor DC 5V/12V 4 Phase Step Motor Reduction Step Motor
- Diameter: 27mm;Voltage: 5V; 12V;Step angle: 5.625 x 1/64;Reduction ratio: 1/64
- It also can be connected as 2 phase to use
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.38 x 1.36 x 1.26 inches
See On Amazon #3
Adafruit Motor/Stepper/Servo Shield for Arduino v2.3 Kit
Asin: B00PUTH3B0 | Model: 1438 | PartNumber: 1438 | Ean: 0702658303396 | UPC: 702658303396
Instead Of A L293d Darlington Driver, We Now Have The Tb6612 Mosfet Driver: With 1.2A Per Channel And 3A Peak Current Capability. It Also Has Much Lower Voltage Drops Across The Motor So You Get More Torque Out Of Your Batteries, And There Are Built-In Flyback Diodes As Well..
As Of 3/21/2014 We Are Shipping Motor Shields With The Terminal Blocks, And Power Jumper Pre-Soldered On. You'll Still Need To Do A Little Soldering To Put On The Shield-Headers (Or Stacking Headers) But It Should Be Even Easier And Faster To Get Started!.
Instead Of Using A Latch And The Arduino's Pwm Pins, We Have A Fully-Dedicated Pwm Driver Chip Onboard. This Chip Handles All The Motor And Speed Controls Over I2c. Only Two Pins (Sda & Scl) Are Required To Drive The Multiple Motors, And Since It's I2c You Can Also Connect Any Other I2c Devices Or Shields To The Same Pins. This Also Makes It Drop-In Compatible With Any Arduino, Such As The Uno, Due, Leonardo And Mega R3..
Completely Stackable Design: 5 Address-Select Pins Means Up To 32 Stackable Shields: That's 64 Steppers Or 128 Dc Motors! What On Earth Could You Do With That Many Steppers? I Have No Idea But If You Come Up With Something Send Us A Photo Because That Would Be A Pretty Glorious Project..
Features
- New version 2.3!
- Completely stackable design: 5 address-select pins means up to 32 stackable shields: that's 64 steppers or 128 DC motors! What on earth could you do with that many steppers? I have no idea but if you come up with something send us a photo because that would be a pretty glorious project.
- Instead of a L293D darlington driver, we now have the TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well.
- Instead of using a latch and the Arduino's PWM pins, we have a fully-dedicated PWM driver chip onboard. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or shields to the same pins. This also makes it drop-in compatible with any Arduino, such as the Uno, Due, Leonardo and Mega R3.
- As of 3/21/2014 we are shipping motor shields with the terminal blocks, and power jumper pre-soldered on. You'll still need to do a little soldering to put on the shield-headers (or stacking headers) but it should be even easier and faster to get started!
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Weight: 0.00 Pounds
See On Amazon #4
Longruner 5X Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board with ArduinoIDE (no Wire)
Asin: B015RQ97W8 | Model: LK67 | PartNumber: LK67 | Ean: 0825349132508, 5053703643932, 0702647176741 | UPC: 825349132508, 702647176741
Motor Diameter: 1.1 Inches.Wire Length：9.05 Inchs. Stepping Angle: 5.625 X 1/64.Reduction Ratio: 1/6.Drive Module Board Size:1.26 Inchsx1.38Inchs. Cable Length: About 20Cm /8-Inch..
Good After-Sales Service..
Great Packing In A Box : 5 Set Uln2003 Stepper Motor + Driver Board..
Stepper Motor With A Standard Interface. A, B, C, D Four-Phase Led Indicates The Status Of The Stepper Motor Work..
Features
- 5pcs Stepper motor and driver board compatible with 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi.
- Stepper motor with a standard interface. A, B, C, D four-phase LED indicates the status of the stepper motor work.
- Motor diameter: 1.1 inches.Wire length 9.05 inchs. Stepping angle: 5.625 x 1/64.Reduction ratio: 1/6.Drive Module Board Size:1.26 inchsX1.38inchs. Cable length: about 20cm /8-inch.
- Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board.
- Good after-sales service.
- See more on Amazon...
First Available: 11/06/2018
Brand: Longruner | Manufacturer: Longruner
Warranty: 1 year warranty
See On Amazon #5
Adafruit MiniBoost 5V @ 1A - TPS61023 Ada 4654
Asin: B09H121GJ3 | Model: 4654 | PartNumber: 4654
More Specifics In Description Section.
Perfect For Use With Battery-Powered Projects With 2 Or 3 Alkaline, Or A Single Lithium Battery.
Features
- Input 2-5VDC on one side, and get 5V at up to 1A supply on the other.
- Perfect for use with battery-powered projects with 2 or 3 Alkaline, or a single Lithium battery
- More specifics in Description section
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
See On Amazon #6
SYUAB 6 PCS 28BYJ-48 ULN2003 5V Stepper Motor with ULN2003 Drive Boards Blue for DIY Kit Arduino PI PIC Raspberry Pi
Asin: B09MRTD2SZ | Model: SYUAB | PartNumber: SYUAB | Ean: 0723497180429 | UPC: 723497180429
5V Power Supply.4-Way Signal Indicator.
Stepper Motor Diameter: 1.06 ; Stepper Motor Lines: 9.45; Voltage:5V. Step Angle: 5.625 X 1 / 64.
Chip All The Pins Already Leads For Easy Connection To Use.
On-Board Xh-5 P Socket.Connect 28Byj-48 Stepper Motor Direct.
Features
- 5V Stepper Motor Driver Blue Board Module,ULN2003 motor driver chip; the stepping motor is a kind of mechanical and electrical device that converts electrical pulses into angular displacement
- On-board XH-5 P socket.connect 28BYJ-48 Stepper Motor direct
- 5V power supply.4-way signal indicator
- Chip all the pins already leads for easy connection to use
- Stepper Motor diameter: 1.06 ; Stepper Motor lines: 9.45; Voltage:5V. Step angle: 5.625 x 1 / 64
- See more on Amazon...
Brand: SYUAB | Manufacturer: SYUAB
See On Amazon #7
DRV8825/A4988 Stable 42 Stepper Motor Driver Expansion Board 3D Printer Control Shield Module for 3D Printer (1)
Asin: B08RP2SCJ7 | Ean: 9588126924314
◎ Compatibility: The 42 Stepper Motor Driver Expansion Board Is Compatible With 12/24V Drive Scheme.
◎ Applicability: The 42 Stepper Motor Driver Expansion Board Is Suitable For 42 Stepper Motor Drive, 3D Printers And Diy. We Are Sure That The Stepper Motor Driver Expansion Board Can Meet Your Needs Greatly.
◎ Superior Performance: The 42 Stepper Motor Driver Expansion Board Is A Highly Integrated Expansion Board, Having The Character Of Small Size. And The Stable And Professional Performance Can Make You Feel At Ease About Our Products.
◎ Terminal Power: The Stable 42 Stepper Motor Driver Expansion Board Is A Terminal Power Connector And You Can Easily Connect The Drive Power Supply, Which Provides Convenience For You Largely.
Features
- On-Board DIP Switch: The 42 stepper motor driver expansion board uses on-board DIP switch and you can easily adjust the drive segments, which is so convenient for you to operate
- Terminal Power: The stable 42 stepper motor driver expansion board is a terminal power connector and you can easily connect the drive power supply, which provides convenience for you largely
- Compatibility: The 42 stepper motor driver expansion board is compatible with 12/24V drive scheme
- Superior Performance: The 42 stepper motor driver expansion board is a highly integrated expansion board, having the character of small size. And the stable and professional performance can make you feel at ease about our products
- Applicability: The 42 stepper motor driver expansion board is suitable for 42 stepper motor drive, 3D printers and DIY. We are sure that the stepper motor driver expansion board can meet your needs greatly
- See more on Amazon...
Brand: Jeanoko | Manufacturer: Jeanoko
Dimensions: 0.39 x 1.65 x 1.65 inches | Weight: 0.03 pounds
See On Amazon #8
Tofelf Stepper Motor Driver, Upgraded Version TB6600 Stepper Driver,4A 9-42V 32 Subdivision for Nema 17/23 Stepper Motor Single Axis Hybrid CNC Controller for CNC/42 57 86 Stepper Motor
Asin: B0BZYX7Z4Z | Model: TB6600 | PartNumber: TB6600 | Ean: 0760606098213 | UPC: 760606098213
✿Applicable To Various Stepper Motors Of Nema 17, 23 And 24, Which Work Well With Nema Motors And Can Also Be Used In Various Machines, Such As X-Y-Z Table, Labeling Machine, Laser Cutting Machine, Engraving Machine, Picking Device, Etc..
✿Suitable For College Students, Engineers, Technicians, Factory Individuals, Diy Electronics Enthusiasts, Etc..
✿Built-In Overheat Protection, Under-Voltage Protection And Over-Current Protection, With Energy-Saving Semi-Automatic Current-Lock Function, Single-Chip Pwm Bipolar Sinusoidal Chopper Ensures Low Vibration And High Efficiency.
✿9V-42V Dc Power Supply, Up To 4A In 8 Output Currents, H-Bridge Bipolar Constant Phase Current Drive, Fast Operation And Easy To Connect, Suitable For Long-Term Use.
Features
- Total 32 subdivisions in 6 modes to choose, can control 2-phase stepper motor forward and reverse, smooth operation and high power
- 9V-42V DC power supply, up to 4A in 8 output currents, H-bridge bipolar constant phase current drive, fast operation and easy to connect, suitable for long-term use
- Applicable to various stepper motors of Nema 17, 23 and 24, which work well with Nema motors and can also be used in various machines, such as X-Y-Z table, labeling machine, laser cutting machine, engraving machine, picking device, etc.
- Built-in overheat protection, under-voltage protection and over-current protection, with energy-saving semi-automatic current-lock function, single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency
- Suitable for college students, engineers, technicians, factory individuals, DIY electronics enthusiasts, etc.
- See more on Amazon...
Brand: Tofelf | Manufacturer: Tofelf
Dimensions: 2.80 x 3.80 x 1.10 Inches | Weight: 0.11 pounds
See On Amazon #9
HRB8825 Stepper Motor HAT Board for Raspberry Pi Series Boards/Jetson Nano,Drives Two Stepper Motors Up to 1/32 Microstepping,Support 3D Printer, Sculpturing Machine, Mechanical Arm
Asin: B0B5QGZGB9 | Model: Stepper Motor HAT (B) for Pi | PartNumber: Stepper Motor HAT (B) for Pi | Ean: 0717186097631 | UPC: 717186097631
Adjustable Motor Drive Current Via Potentiometer, Maximum 2.5A Current Output.Protection Features: Overcurrent Protection (Ocp), Thermal Shutdown (Tsd), Vm Undervoltage Lockout (Uvlo).
Comes With Development Resources And Manual (Examples In Bcm2835, Wiringpi, And Python).
Integrates 5V Regulator, Allows Providing Power To Raspberry Pi.Onboard Multi Connector Options For Stepper Motors In Different Specifications.
Onboard Dual Hr8825 Motor Controller Ic With Built-In Microstepping Indexer, Drives Two Stepper Motors, Easy To Use.6 Available Microstepping Modes, Configured With The Dip Switches: Full-Step, Half-Step, 1/4-Step, 1/8-Step, 1/16-Step, And 1/32-Step.
Features
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- Onboard dual HR8825 motor controller IC with built-in microstepping indexer, drives two stepper motors, easy to use.6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Adjustable motor drive current via potentiometer, maximum 2.5A current output.Protection features: Overcurrent Protection (OCP), Thermal Shutdown (TSD), VM Undervoltage Lockout (UVLO)
- Integrates 5V regulator, allows providing power to Raspberry Pi.Onboard multi connector options for stepper motors in different specifications
- Comes with development resources and manual (examples in BCM2835, wiringPi, and python)
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
Weight: 0.09 pounds
See On Amazon
Looking For Something Else?
Search