HHIP 4101-0606 Clamp, 4" Capacity
Asin: B01LW4YNK0 | Model: 4101-0606 | PartNumber: 4101-0606 | Ean: 0769053034577 | UPC: 769053034577
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Capacity Is 4 Inch.
Country Of Origin: United States.
Rectangular Gage Block Accessories.
Features
- Replacement clamps
- Rectangular Gage block accessories
- Capacity is 4 inch
- Country of origin: United States
- See more on Amazon...
Brand: HHIP | Manufacturer: ABS Import Tools, Inc.
Dimensions: 6.00 x 3.00 x 1.00 inches
See On Amazon Similar To HHIP 41010606 Clamp 4 Capacity
#1
Peachtree Woodworking Supply 2 Pack of 4 Way Pressure Clamps For Clamping Panels - Using Pressure From All Four Directions. For Woodworkers, Cabinet and Furniture Makers (2 four way pressure clamps)
Asin: B073QSF8JR | Model: 666 | PartNumber: 666
Build Any Length Clamp With The Durable Plastic Bars With 4 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths. Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches. Turn The Handle Clockwise To Tighten The Clamp And Turn The Handle Counter Clockwise To Release Pressure. The 4 Way Pressure Clamp Is Equipped With Side Pressure Pads To Prevent Damaging Your Stock..
This Clamp Package Comes With Two Full 4 Way Pressure Clamp Assemblies. Includes: 2 Each Rotating Handle Assemblies, 2 Each Tailstock Assemblies, 4 Each Side Pressure Pads And 12 Each 4 Notch Bars. Together, This Setup Will Allow You To Create Two 4 Way Pressure Clamps. More Than One Clamp Is Generally Recommended For Any Project Over 12” In Length. Wood Is Required For Setting Up The Clamp. Wood Is Not Included..
Now You Can Confidently Glue Up Wide Boards, Shelving, Table Tops, And More Up To 6” Thick. To Setup The Clamps Simply Attach The Clamp To Any Length 2 X 2’S (2” X 4” Ripped In Half) With The The Wood Screws That Are Provided, Apply Wood Glue To Your Project, Set The Clamps On To Your Panel Boards And Turn Handle To Tighten The Clamp On All Four Sides. We Recommend That You Place A 4 Way Pressure Clamp Every 12” To 18” For Best Results..
Let’S Make Racked Panel Glue Ups A Thing Of The Past! The Uniquely Designed 4 Way Pressure Solves This Age Old Issue By Applying Pressure To All Four Sides Of Your Panel Glue Up. With A Simple Turn Of The Rotating Clamp Handle, All Four Sides Of The Clamp Will Draw Inward At The Same Time. This Provides Equal Pressure On To Your Panel And Prevents Bowing, Buckling, Or Racked Panels..
Features
- Clamping panels can certainly be a challenge. Especially when we try to use everyday pipe clamps or bar clamps. While these types of clamps work fairly well on certain glue up projects, the one thing they don t do at all is apply pressure from the top and bottom of the panels during glue up. In fact, with all the pressure being applied on both sides, bar and pipe clamps will almost certainly bow, buckle or rack your panel glue up project.
- Let s make racked panel glue ups a thing of the past! The uniquely designed 4 way pressure solves this age old issue by applying pressure to all four sides of your panel glue up. With a simple turn of the rotating clamp handle, all four sides of the clamp will draw inward at the same time. This provides equal pressure on to your panel and prevents bowing, buckling, or racked panels.
- Build any length clamp with the durable plastic bars with 4 notches for maximum adjustability to handle a variety of stock widths. Clamp can be used for boards up to 6 inches in thickness by simply adjusting the clamp width capacity with the appropriate number of notches. Turn the handle clockwise to tighten the clamp and turn the handle counter clockwise to release pressure. The 4 way pressure clamp is equipped with side pressure pads to prevent damaging your stock.
- Now you can confidently glue up wide boards, shelving, table tops, and more up to 6 thick. To setup the clamps simply attach the clamp to any length 2 x 2 s (2 x 4 ripped in half) with the the wood screws that are provided, apply wood glue to your project, set the clamps on to your panel boards and turn handle to tighten the clamp on all four sides. We recommend that you place a 4 way pressure clamp every 12 to 18 for best results.
- This clamp package comes with two full 4 way pressure clamp assemblies. Includes: 2 each rotating handle assemblies, 2 each tailstock assemblies, 4 each side pressure pads and 12 each 4 notch bars. Together, this setup will allow you to create two 4 way pressure clamps. More than one clamp is generally recommended for any project over 12 in length. Wood is required for setting up the clamp. Wood is NOT included.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc..
Weight: 9.15 Pounds
See On Amazon #2
HFS(R) 58 Pieces 5/8" T-Slot Hold Down Clamp Clamping Set Kit for Use with Bridgeport mills (5/8" Slot 1/2"-13 Stud)
Asin: B00OGI9XFK | Model: 14354 | PartNumber: 14354 | Ean: 0819300015702 | UPC: 819300015702
[Easy To Use]: Designed For Easy Installation And Removal, Allowing For Quick And Hassle-Free Use..
[Application]:Suitable For Use With Bridgeport Mills And Other Milling Machines, Ideal For Holding Down Workpieces Securely And Accurately..
[Easy To Store]: Sturdy Storage Case With Designated Compartments Keeps Tools Well-Organized And Protected When Not In Use..
[Premuim Quality]: Made Of High Quality Tool Steel, Ensuring Long-Lasting Performance And Reliable Clamping Strength.All Parts Are Heat-Treated..
Features
- [Specification]: Table T-Slot size: 5/8IN Stud size: 1/2IN-13;packing: T Nut No. TN-0212 Step Clamp:25S-12, 40S-12, 60S-12, (2pcs of Each size) Step Block: STB-1, STB-2, STB-3 (2pcs of Each size).
- [Premuim quality]: Made of high quality tool steel, ensuring long-lasting performance and reliable clamping strength.All parts are heat-treated.
- [Easy to Use]: Designed for easy installation and removal, allowing for quick and hassle-free use.
- [Easy to store]: Sturdy storage case with designated compartments keeps tools well-organized and protected when not in use.
- [Application]:Suitable for use with Bridgeport mills and other milling machines, ideal for holding down workpieces securely and accurately.
- See more on Amazon...
Brand: HFS | Manufacturer: HFS
Weight: 19.14 pounds
See On Amazon #3
Peachtree Woodworking Supply 2 Pack of 4 Way Pressure Clamps For Clamping Panels - Using Pressure From All Four Directions. Ideal For Woodworkers and Cabinet and Furniture Makers
Asin: B08D1LTF65 | Model: 666 | PartNumber: 666 | Ean: 0817918020682 | UPC: 817918020682
Build Any Length Clamp With The Durable Plastic Bars With 4 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths. Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches. Turn The Handle Clockwise To Tighten The Clamp And Turn The Handle Counter Clockwise To Release Pressure. The 4 Way Pressure Clamp Is Equipped With Side Pressure Pads To Prevent Damaging Your Stock.
Now You Can Confidently Glue Up Wide Boards, Shelving, Table Tops, And More Up To 6” Thick. To Setup The Clamps Simply Attach The Clamp To Any Length 2 X 2’S (2” X 4” Ripped In Half) With The The Wood Screws That Are Provided, Apply Wood Glue To Your Project, Set The Clamps On To Your Panel Boards And Turn Handle To Tighten The Clamp On All Four Sides. We Recommend That You Place A 4 Way Pressure Clamp Every 12” To 18” For Best Results..
Let’S Make Racked Panel Glue Ups A Thing Of The Past. With A Simple Turn Of The Rotating Clamp Handle, All Four Sides Of The Clamp Will Draw Inward At The Same Time.
Features
- Clamping Panels Can Certainly Be A Challenge. Especially When We Try To Use Everyday Pipe Clamps Or Bar Clamps. While These Types Of Clamps Work Fairly Well On Certain Glue Up Projects, The One Thing They Don T Do At All Is Apply Pressure From The Top And Bottom Of The Panels During Glue Up. In Fact, With All The Pressure Being Applied On Both Sides, Bar And Pipe Clamps Will Almost Certainly Bow, Buckle Or Rack Your Panel Glue Up Project
- Let S Make Racked Panel Glue Ups A Thing Of The Past. With A Simple Turn Of The Rotating Clamp Handle, All Four Sides Of The Clamp Will Draw Inward At The Same Time
- Build Any Length Clamp With The Durable Plastic Bars With 4 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths. Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches. Turn The Handle Clockwise To Tighten The Clamp And Turn The Handle Counter Clockwise To Release Pressure. The 4 Way Pressure Clamp Is Equipped With Side Pressure Pads To Prevent Damaging Your Stock
- Now You Can Confidently Glue Up Wide Boards, Shelving, Table Tops, And More Up To 6 Thick. To Setup The Clamps Simply Attach The Clamp To Any Length 2 X 2 S (2 X 4 Ripped In Half) With The The Wood Screws That Are Provided, Apply Wood Glue To Your Project, Set The Clamps On To Your Panel Boards And Turn Handle To Tighten The Clamp On All Four Sides. We Recommend That You Place A 4 Way Pressure Clamp Every 12 To 18 For Best Results.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc..
Dimensions: 5.40 x 16.00 x 6.30 inches | Weight: 8.95 Pounds
See On Amazon #4
HHIP 3900-0184 Pro-Series High Grade Iron Quick Slide Drill Press Vise, 4" Width x 1.375" Depth Jaw, 4.75" Jaw Opening (Pack of 1)
Asin: B00E0NC29U | Model: 3900-0184 | PartNumber: 3900-0184 | Ean: 0769053016030 | UPC: 769053016030
Precision Ground.
Jaw Measures 4-Inches Width By 1.375-Inches Depth.
4.75-Inches Jaw Opening.
Made Of High Grade Strong Stress Relieved Iron Casting.
Features
- Pro-series quick slide drill press vise
- Made of high grade strong stress relieved iron casting
- Precision ground
- 4.75-inches jaw opening
- Jaw measures 4-inches width by 1.375-inches depth
- See more on Amazon...
Brand: HHIP | Manufacturer: ABS Import Tools Inc
Dimensions: 4.00 x 14.00 x 6.00 inches
See On Amazon #5
HHIP 4101-0607 Clamp, 8" Capacity
Asin: B01LTHIZR2 | Model: 4101-0607 | PartNumber: 4101-0607 | Ean: 0769053034584 | UPC: 769053034584
Capacity Is 8 Inch.
Country Of Origin: United States.
Rectangular Gage Block Accessories.
Features
- Replacement clamps
- Rectangular Gage block accessories
- Capacity is 8 inch
- Country of origin: United States
- See more on Amazon...
First Available: 05/15/2017
Brand: HHIP | Manufacturer: ABS Import Tools, Inc.
Dimensions: 6.00 x 6.00 x 6.00 inches | Weight: 2.00 Pounds
See On Amazon #6
HHIP 3.54 X 2.76 X 4.92 INCH V-Block & CLAMP Set (3402-0955)
Asin: B00N40X0RS | Model: 3402-0955 | PartNumber: 3402-0955 | Ean: 0769053012469 | UPC: 769053012469
90° V Groove Accuracy Are Central, Parallel And Square With All Surfaces Within 0.0003"..
Case Is Hardened And Ground. | Clamps Are Included.
Supplied In Matched Pair..
Clamps Are Included..
Features
- Vee Capacity 2-1/8" | Dimension (W x H x L) 2-3/4 x 3-1/2 x 4-7/8"
- Clamps are included.
- 90 V groove accuracy are central, parallel and square with all surfaces within 0.0003.
- Supplied in matched pair.
- Case is hardened and ground. | Clamps are included
- See more on Amazon...
Brand: HHIP | Manufacturer: HHIP
Dimensions: 4.00 x 4.00 x 8.00 inches | Weight: 21.00 Pounds
See On Amazon #7
HHIP 3900-0302 Adjustable Clamping Assembly, 1/2-13 x 4"
Asin: B00R138NFI | Model: 3900-0302 | PartNumber: 3900-0302 | Ean: 0769053016641, 0769053017549 | UPC: 769053016641, 769053017549
One Piece Assembly Allows Quick Set-Up On Mill Tables With T-Slot.
Instant Height Adjustment. Priced Per Each.
Clamping Range Up To 2-1/16" Each Width 1-5/8".
Features
- T-slot Bolt T-slot 1/2" Clamping (Stud x Length) 1/2"-13 x 4"
- Clamping Range Up to 2-1/16 Each Width 1-5/8
- One piece assembly allows quick set-up on mill tables with T-slot
- Instant height adjustment. PRICED PER EACH
- See more on Amazon...
Brand: HHIP | Manufacturer: HHIP
Dimensions: 6.00 x 3.00 x 1.00 Inches | Weight: 0.64 pounds
See On Amazon #8
HHIP 3901-0184 Pro-Series Industrial 4" Drill Press Vise
Asin: B0742PGFWD | Model: 3901-0184 | PartNumber: 3901-0184 | Ean: 0769053090009 | UPC: 769053090009
Body And Slide Are Made Of Selected Fine Grain Cast Iron.
Slip Handle Allows For Easy Turning And Added Leverage.
Hardened Steel V-Groove Jaws Hold Round Shapes In Both Vertical Or Horizontal Positions.
Can Be Used On The Base, Sides Or An End.
Features
- Precision machined on 4 sides
- Can be used on the base, sides or an end
- Body and slide are made of selected fine grain cast iron
- Hardened steel v-groove jaws hold round shapes in both vertical or horizontal positions
- Slip handle allows for easy turning and added leverage
- See more on Amazon...
First Available: 07/19/2017
Brand: HHIP | Manufacturer: ABS Import Tools Inc.
Dimensions: 11.00 x 5.00 x 3.00 inches
See On Amazon #9
HHIP 3900-2704 4" Heavy Duty Cross Slide Vise, Metric Dial
Asin: B013E2ZPSC | Model: 3900-2704 | PartNumber: 3900-2704 | Ean: 0769053022444 | UPC: 769053022444
Brand Name: Hhip.
Manufacturer: Hhip.
Cross Travel And Jaw Width Are 4".
Features
- Jaw opening is 3.8"
- Cross travel and jaw width are 4
- Brand Name: HHIP
- Manufacturer: HHIP
- See more on Amazon...
Brand: HHIP | Manufacturer: HHIP
Dimensions: 20.32 x 30.48 x 20.32 Inches
See On Amazon #10
HHIP 2100-2902 TP-2 Clamp
Asin: B0949LB5HP | Model: 2100-2902 | PartNumber: 2100-2902 | Ean: 0769053104195 | UPC: 769053104195
Country Of Origin :China.
Package Weight :0.1Lbs.
Package Quantity :1.
Features
- Product Type :Cutting Tools
- Package Quantity :1
- Country Of Origin :China
- Package Weight :0.1Lbs
- See more on Amazon...
Brand: HHIP | Manufacturer: HHIP
Dimensions: 1.00 x 1.00 x 1.00 inches | Weight: 1.00 pounds
See On Amazon
Looking For Something Else?
Search