AEM 30-3325 (1.15-Gallon Water Methanol Injection Tank)
Asin: B01MFCTXYJ | Model: 30-3325 | PartNumber: 30-3325 | Ean: 0840879025335 | UPC: 840879025335
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.First Available: 01/05/2018
Brand: AEM | Manufacturer: AEM
Dimensions: 12.25 x 8.75 x 12.25 inches | Weight: 2.71 pounds
Warranty: 12 Months
See On Amazon Similar To AEM 303325 1.15Gallon Water Methanol
#1
AEM 30-3003 Water/Methanol Injection Filter
Asin: B0032W3KH8 | Model: 30-3003 | PartNumber: 30-3003 | Ean: 0840879020941, 0764885209254 | UPC: 764885209254, 840879020941
Brand: AEM | Manufacturer: AEM
Dimensions: 1.97 x 5.91 x 3.94 Inches | Weight: 0.20 pounds
Warranty: Manufacturer warranty
See On Amazon #2
AEM (30-3351) V2 5-Gallon Water/Methanol Injection Kit with Multi-Input Controller
Asin: B00GSIBGAG | Model: 30-3351 | PartNumber: 30-3351 | Ean: 0840879022761 | UPC: 840879022761
Wiring Harness Is Terminated With A Positive-Lock Connector On One End With Color-Coded Wires To Ease Installation, Power And Ground Wires For The Pump And Additional Wire For Optional On/Off Fluid Solenoid.
Precision-Machined Billet-Aluminum Injector With Integral Check Valve; Three Interchangeable Injector Nozzles To Cover A Wide Variety Of Hp Levels.
Internally-Bypassed Water/Methanol Injection Pump Does Not Cycle On/Off And Provides Quiet, Smooth Operation; It Features Robust Construction Including Integral Hose Fittings.
Multi-Input Controller Features Large Adjustment Knobs, Integrated Plug For Harness Connection, Integrated Fuse, Covered Status Light And Test Buttons For Enhanced Splash Resistance And Mounting Tabs.
Features
- Multi-Input, 0-5V/frequency-based progressive controller design for use with external MAP sensor for boost or MAF/IDC on high compression NA gas vehicles
- Multi-Input controller features large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test buttons for enhanced splash resistance and mounting tabs
- Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, power and ground wires for the pump and additional wire for optional on/off fluid solenoid
- Internally-bypassed water/methanol injection pump does not cycle on/off and provides quiet, smooth operation; it features robust construction including integral hose fittings
- Precision-machined billet-aluminum injector with integral check valve; three interchangeable injector nozzles to cover a wide variety of HP levels
- See more on Amazon...
First Available: 11/20/2013
Brand: AEM | Manufacturer: AEM
Dimensions: 10.00 x 25.00 x 16.00 Inches | Weight: 15.65 pounds
Warranty: 1 Year
See On Amazon #3
AEM Water - Methanol Injecti on Kit V3 Injector Kit
Asin: B0912FJV1W | Model: 30-3313 | PartNumber: 30-3313 | Ean: 0840879027025 | UPC: 840879027025
Item Package Weight - 0.06 Pounds.
Product Type - Valve.
Item Package Quantity - 1.
Item Package Dimension: 2.5L X 1.5W X 0.66H Inches.
Features
- Water - Methanol Injecti on Kit V3 Injector Kit
- Item Package Dimension: 2.5L x 1.5W x 0.66H inches
- Item Package Weight - 0.06 Pounds
- Item Package Quantity - 1
- Product Type - VALVE
- See more on Amazon...
Brand: AEM | Manufacturer: AEM ELECTRONICS
Dimensions: 1.00 x 2.00 x 1.00 Inches
See On Amazon #4
AEM 30-3015 Water/Methanol Injection Pump
Asin: B005ASY2ME | Model: 30-3015 | PartNumber: 30-3015 | Ean: 0601040543504, 0840879021412 | UPC: 840879021412, 601040543504
Fit Type: Vehicle Specific.
Aem30-3015.
High Pressure Recirculation Style Pump.
Features
- Built-in fittings for a compact design
- High pressure recirculation style pump
- Fit type: Vehicle Specific
- AEM30-3015
- See more on Amazon...
First Available: 02/18/2013
Brand: AEM | Manufacturer: AEM
Dimensions: 4.72 x 4.33 x 2.30 inches | Weight: 4.41 Pounds
Warranty: 12 Months
See On Amazon #5
AEM 30-3326 Ladedruckanzeige
Asin: B07YLBDGCQ | Model: 30-3326 | PartNumber: 30-3326 | Ean: 0840879026844 | UPC: 840879026844
Features
- High flow rating (3600 cc/min @ 150 psi) Low current draw (0 75A @ 13 5V) No additional relay required
- See more on Amazon...
Brand: AEM | Manufacturer: AEM
Dimensions: 2.25 x 4.50 x 4.25 Inches | Weight: 0.55 pounds
Warranty: Warranty
See On Amazon #6
Aem Electronics Water/Methanol Inline Injection Filter By Jm Auto Racing (30-3003)
Asin: B07DM7WBDY | Ean: 0608067031076 | UPC: 608067031076
Brand: AEM
Dimensions: 2.25 x 4.50 x 4.25 Inches | Weight: 0.50 pounds
See On Amazon #7
AEM (30-3302) V2 Water/Methanol Injection Kit with Internal MAP Sensor
Asin: B00GSIB56Q | Model: 30-3302 | PartNumber: 30-3302 | Ean: 0840879022662 | UPC: 840879022662
Pump Does Not Cycle On/Off And Provides Quiet, Smooth Operation; It Features Robust Construction Including Integral Hose Fittings, Epdm Seals And A Santoprene Diaphragm That Provides Consistent And Reliable Fluid Delivery.
Precision-Machined Billet-Aluminum Injector With Integral Check Valve; Three Interchangeable Injector Nozzles To Cover A Wide Variety Of Hp Levels (250Cc/Min, 500Cc/Min And 1,000Cc/Min); Tank-Less 35 Psi Boost Dependent Gas Water/Methanol System.
Wiring Harness Is Terminated With A Positive-Lock Connector On One End With Color-Coded Wires To Ease Installation, Power And Ground Wires For The Pump And Additional Wire For Optional On/Off Fluid Solenoid.
Features
- Boost Dependent controller features on-board MAP sensor with large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs
- Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, power and ground wires for the pump and additional wire for optional on/off fluid solenoid
- Pump does not cycle on/off and provides quiet, smooth operation; it features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery
- Precision-machined billet-aluminum injector with integral check valve; three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500cc/min and 1,000cc/min); tank-less 35 PSI Boost dependent gas water/methanol system
- See more on Amazon...
First Available: 11/20/2013
Brand: AEM | Manufacturer: AEM
Dimensions: 27.56 x 27.56 x 19.69 Inches | Weight: 8.40 pounds
Warranty: 1 Year
See On Amazon #8
AEM (30-3320) V2 Water/Methanol Injection Tank Kit - 5 Gallon Capacity
Asin: B00GSIBBNS | Model: 30-3320 | PartNumber: 30-3320 | Ean: 0840879022716, 0638577118899 | UPC: 638577118899, 840879022716
Using This Fluid At High Pressures, Without Dilution, In An Under-Hood Environment With Nylon Lines And Push-To-Connect Fittings Is Very Unsafe.
However, The Safety Issues Are Very Real And Far Outweigh Any Perceived Benefit Of Running High Concentrations Of Methanol.
The Performance Advantages Of Using Greater Than 50 Percent Methanol Concentrations Are Small, If They Exist At All.
Methanol Can Be Absorbed Through The Skin And Even Small Amounts Can Cause Blindness Or Even Death.
Features
- Methanol is a toxic and highly flammable chemical; 100 percent Methanol ignites easily and burns vigorously with an almost undetectable flame
- Methanol can be absorbed through the skin and even small amounts can cause blindness or even death
- Using this fluid at high pressures, without dilution, in an under-hood environment with nylon lines and push-to-connect fittings is very unsafe
- The performance advantages of using greater than 50 percent methanol concentrations are small, if they exist at all
- However, the safety issues are very real and far outweigh any perceived benefit of running high concentrations of methanol
- See more on Amazon...
First Available: 11/20/2013
Brand: AEM | Manufacturer: AEM
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 2.00 Pounds
Warranty: 1 Year
See On Amazon #9
AEM (30-3301) V2 5-Gallon Water/Methanol Injection Kit with HD Controller and Internal MAP Sensor
Asin: B00GSIB55W | Model: 30-3301 | PartNumber: 30-3301 | Ean: 0840879022624 | UPC: 840879022624
Heavy-Duty High-Pressure Injection Pump Features Integral Fittings, A Santoprene Diaphragm And Epdm Seals To Resist Corrosion; Pump's Quiet, Smooth Operation Is Almost Undetectable.
5 Gallon Tank With Anti-Slosh Technology And High Tech Conductive Low-Fluid Sensor With Positive Lock Connector 20 Feet Of Nylon Injection Tubing Included Led Dash Light For System Status And Low Fluid Warning.
Two Precision-Machined Billet-Aluminum Injectors With Integral Check Valves Include Multiple Nozzles To Cover A Wide Range Of Horsepower Levels (500Cc/Min And Two 1,000Cc/Min).
Wiring Harness Is Terminated With A Positive-Lock Connector On One End With Color-Coded Wires To Ease Installation, Integrated Pump Ground Circuit And Additional Wire For Optional On/Off Solenoid.
Features
- Boost Dependent HD controller features large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs
- Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, integrated pump ground circuit and additional wire for optional on/off solenoid
- Heavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion; pump's quiet, smooth operation is almost undetectable
- Two precision-machined billet-aluminum injectors with integral check valves include multiple nozzles to cover a wide range of horsepower levels (500cc/min and two 1,000cc/min)
- 5 gallon tank with anti-slosh technology and high tech conductive low-fluid sensor with positive lock connector 20 feet of Nylon injection tubing included LED dash light for system status and low fluid warning
- See more on Amazon...
First Available: 11/20/2013
Brand: AEM | Manufacturer: AEM
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 14.60 Pounds
Warranty: 1 Year
See On Amazon #10
AEM Water Methanol Injection 200psi Recirculation Pump with 3/8 NPT Fittings
Asin: B01F65KT0Y | Model: 30-3018 | PartNumber: 30-3018 | Ean: 0840879025168 | UPC: 840879025168
Brand: AEM | Manufacturer: AEM Electronics
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 pounds
Warranty: Manufacturer warranty
See On Amazon #11
AEM (30-3352) V2 Water/Methanol Injection Kit with Multi-Input Controller
Asin: B00GSIBJ44 | Model: 30-3352 | PartNumber: 30-3352 | Ean: 0840879022778 | UPC: 840879022778
Multi-Input Controller Features Large Adjustment Knobs, Integrated Plug For Harness Connection, Integrated Fuse, Covered Status Light And Test Buttons For Enhanced Splash Resistance And Mounting Tabs.
Precision-Machined Billet-Aluminum Injector With Integral Check Valve; Three Interchangeable Injector Nozzles To Cover A Wide Variety Of Hp Levels.
Wiring Harness Is Terminated With A Positive-Lock Connector On One End With Color-Coded Wires To Ease Installation, Power And Ground Wires For The Pump And Additional Wire For Optional On/Off Fluid Solenoid.
Multi-Input, 0-5V/Frequency-Based Progressive Controller Design For Use With External Map Sensor For Forced Induction Gas Or Turbo Diesels, Or Maf/Idc On High Compression Na Gas Vehicles.
Features
- Tank-less system
- Multi-Input, 0-5V/frequency-based progressive controller design for use with external MAP sensor for forced induction gas or turbo Diesels, or MAF/IDC on high compression NA gas vehicles
- Multi-Input controller features large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test buttons for enhanced splash resistance and mounting tabs
- Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, power and ground wires for the pump and additional wire for optional on/off fluid solenoid
- Precision-machined billet-aluminum injector with integral check valve; three interchangeable injector nozzles to cover a wide variety of HP levels
- See more on Amazon...
First Available: 11/20/2013
Brand: AEM | Manufacturer: AEM
Dimensions: 5.00 x 14.00 x 14.00 Inches | Weight: 9.15 pounds
Warranty: 1 Year
See On Amazon #12
AEM Electronics 30-3351 V2 5 Gallon Diesel Water/Methanol Injection Kit
Asin: B00MU18GMG | Ean: 0642124422544 | UPC: 642124422544
Brand: AEM | Manufacturer: AEM Electronics
Weight: 0.00 pounds
See On Amazon
Looking For Something Else?
Search