AEM 30-3326 Ladedruckanzeige
Asin: B07YLBDGCQ | Model: 30-3326 | PartNumber: 30-3326 | Ean: 0840879026844 | UPC: 840879026844
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Features
- High flow rating (3600 cc/min @ 150 psi) Low current draw (0 75A @ 13 5V) No additional relay required
- See more on Amazon...
Brand: AEM | Manufacturer: AEM
Dimensions: 2.25 x 4.50 x 4.25 inches | Weight: 0.55 Pounds
Warranty: Warranty
See On Amazon Similar To AEM 303326 Ladedruckanzeige
#1
AEM 30-2131-100 100 PSIG Brass Sensor Kit
Asin: B002NT7HK2 | Model: 30-2131-100 | PartNumber: 30-2131-100 | Ean: 0757100092298, 0840879019969 | UPC: 757100092298, 840879019969
Brand: AEM | Manufacturer: AEM
Dimensions: 1.18 x 2.17 x 1.18 inches | Weight: 0.13 Pounds
Warranty: Warranty
See On Amazon #2
AEM 30-0310 X-Series Inline Wideband UEGO AFR Sensor Controller
Asin: B0184TLVL0 | Model: 30-0310 | PartNumber: 30-0310 | Ean: 0840879024475 | UPC: 840879024475
X-Series Digital Wideband Technology Gives These Controllers The Ability To Read And Report Values That Other Controllers Do Not, Which Can Deliver More Optimized Engine Tuning And A Safer Overall Operating Condition.
When Tuning An Engine Using Wideband Afr Feedback Control On An Inertia Dyno, Dead Time Affects The Data You Are Looking At Because It Is Reported In A Different Operating Location Than When It Actually Occurred.
Faster Response Time Improves Wideband Feedback Control, And Can Provide A Safer, More Powerful And Accurate Tune.
The X-Series Inline Controller Includes A 0-5V And Rs232 Serial Port Output For Feedback Control And Data Logging, And An Aemnet (Canbus) Output.
Features
- X-Series Inline Wideband UEGO Controller features a weather-resistant, low-profile enclosure with status LEDs
- The X-Series Inline Controller includes a 0-5v and RS232 Serial Port output for feedback control and data logging, and an AEMnet (CANbus) output
- X-Series digital wideband technology gives these controllers the ability to read and report values that other controllers do not, which can deliver more optimized engine tuning and a safer overall operating condition
- Faster response time improves wideband feedback control, and can provide a safer, more powerful and accurate tune
- When tuning an engine using wideband AFR feedback control on an inertia dyno, dead time affects the data you are looking at because it is reported in a different operating location than when it actually occurred
- See more on Amazon...
First Available: 12/14/2015
Brand: AEM | Manufacturer: AEM
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 1.50 pounds
Warranty: Warranty
See On Amazon #3
AEM Water - Methanol Injecti on Kit V3 Injector Kit
Asin: B0912FJV1W | Model: 30-3313 | PartNumber: 30-3313 | Ean: 0840879027025 | UPC: 840879027025
Item Package Weight - 0.06 Pounds.
Product Type - Valve.
Item Package Quantity - 1.
Item Package Dimension: 2.5L X 1.5W X 0.66H Inches.
Features
- Water - Methanol Injecti on Kit V3 Injector Kit
- Item Package Dimension: 2.5L x 1.5W x 0.66H inches
- Item Package Weight - 0.06 Pounds
- Item Package Quantity - 1
- Product Type - VALVE
- See more on Amazon...
Brand: AEM | Manufacturer: AEM ELECTRONICS
Dimensions: 1.00 x 2.00 x 1.00 inches
See On Amazon #4
AEM 30-2400 Boost Control Solenoid Kit
Asin: B0012USLLC | Model: 30-2400 | PartNumber: 30-2400 | Ean: 0840879015015 | UPC: 840879015015
Two Door And Four Door.
1310 U-Joint Size.
Features
- Recommended for up to 35" tires and 4. 5" lift
- 1310 u-joint size
- Two door and four door
- See more on Amazon...
Brand: AEM | Manufacturer: AEM
Dimensions: 1.18 x 1.57 x 1.18 inches | Weight: 0.00 Pounds
Warranty: Warranty
See On Amazon #5
Aem Electronics Water/Methanol Inline Injection Filter By Jm Auto Racing (30-3003)
Asin: B07DM7WBDY | Ean: 0608067031076 | UPC: 608067031076
Brand: AEM
Dimensions: 2.25 x 4.50 x 4.25 inches | Weight: 0.50 Pounds
See On Amazon #6
AEM 30-3003 Water/Methanol Injection Filter
Asin: B0032W3KH8 | Model: 30-3003 | PartNumber: 30-3003 | Ean: 0840879020941, 0764885209254 | UPC: 764885209254, 840879020941
Brand: AEM | Manufacturer: AEM
Dimensions: 1.97 x 5.91 x 3.94 inches | Weight: 0.20 Pounds
Warranty: Manufacturer warranty
See On Amazon #7
AEM 30-2010 Air Inlet Temperature Sensor Kit
Asin: B000CFSIRU | Model: 30-2010 | PartNumber: 30-2010 | Ean: 0840879011338 | UPC: 840879011338
Brand: AEM | Manufacturer: AEM
Dimensions: 4.72 x 4.72 x 2.76 Inches | Weight: 0.15 Pounds
Warranty: Warranty
See On Amazon #8
AEM (30-3304) V2 Water/Methanol Injection Standard Controller Kit with Internal MAP Sensor
Asin: B00GSIB57K | Model: 30-3304 | PartNumber: 30-3304 | Ean: 0840879022686 | UPC: 840879022686
Methanol Is A Toxic And Highly Flammable Chemical; 100 Percent Methanol Ignites Easily And Burns Vigorously With An Almost Undetectable Flame.
Aem Strongly Recommends That Users Never Exceed A 50 Percent Methanol Concentration When Using Any Aem Water Methanol System Or Component.
Features
- Legal in California only for racing vehicles which may never be used upon a highway
- AEM strongly recommends that users never exceed a 50 percent methanol concentration when using any AEM Water Methanol system or component
- Methanol is a toxic and highly flammable chemical; 100 percent Methanol ignites easily and burns vigorously with an almost undetectable flame
- See more on Amazon...
First Available: 11/20/2013
Brand: AEM | Manufacturer: AEM
Dimensions: 10.63 x 10.24 x 2.76 inches | Weight: 0.99 Pounds
Warranty: 1 Year
See On Amazon #9
AEM 30-3325 (1.15-Gallon Water Methanol Injection Tank)
Asin: B01MFCTXYJ | Model: 30-3325 | PartNumber: 30-3325 | Ean: 0840879025335 | UPC: 840879025335
First Available: 01/05/2018
Brand: AEM | Manufacturer: AEM
Dimensions: 12.25 x 8.75 x 12.25 inches | Weight: 2.71 pounds
Warranty: 12 Months
See On Amazon #10
AEM ELECTRON 303459
Asin: B07YLBJ57P | Model: 30-3459 | PartNumber: 30-3459 | Ean: 0840879026820 | UPC: 840879026820
Brand: AEM | Manufacturer: AEM
Dimensions: 1.30 x 4.60 x 4.60 inches | Weight: 0.30 Pounds
Warranty: Manufacturer warranty
See On Amazon #11
AEM (30-3306) V2 Water/Methanol Injection HD Controller Kit with Internal MAP Sensor
Asin: B00GSIBDJK | Model: 30-3306 | PartNumber: 30-3306 | Ean: 0840879022709 | UPC: 840879022709
Methanol Is A Toxic And Highly Flammable Chemical; 100 Percent Methanol Ignites Easily And Burns Vigorously With An Almost Undetectable Flame.
Aem Strongly Recommends That Users Never Exceed A 50 Percent Methanol Concentration When Using Any Aem Water Methanol System Or Component.
Features
- Legal in California only for racing vehicles which may never be used upon a highway
- AEM strongly recommends that users never exceed a 50 percent methanol concentration when using any AEM Water Methanol system or component
- Methanol is a toxic and highly flammable chemical; 100 percent Methanol ignites easily and burns vigorously with an almost undetectable flame
- See more on Amazon...
First Available: 11/20/2013
Brand: AEM | Manufacturer: AEM
Dimensions: 2.23 x 9.79 x 9.34 inches | Weight: 0.99 Pounds
Warranty: 1 Year
See On Amazon #12
AEM 30-3015 Water/Methanol Injection Pump
Asin: B005ASY2ME | Model: 30-3015 | PartNumber: 30-3015 | Ean: 0601040543504, 0840879021412 | UPC: 840879021412, 601040543504
Fit Type: Vehicle Specific.
Aem30-3015.
High Pressure Recirculation Style Pump.
Features
- Built-in fittings for a compact design
- High pressure recirculation style pump
- Fit type: Vehicle Specific
- AEM30-3015
- See more on Amazon...
First Available: 02/18/2013
Brand: AEM | Manufacturer: AEM
Dimensions: 4.72 x 4.33 x 2.30 inches | Weight: 4.41 Pounds
Warranty: 12 Months
See On Amazon #13
AEM (30-3302) V2 Water/Methanol Injection Kit with Internal MAP Sensor
Asin: B00GSIB56Q | Model: 30-3302 | PartNumber: 30-3302 | Ean: 0840879022662 | UPC: 840879022662
Pump Does Not Cycle On/Off And Provides Quiet, Smooth Operation; It Features Robust Construction Including Integral Hose Fittings, Epdm Seals And A Santoprene Diaphragm That Provides Consistent And Reliable Fluid Delivery.
Precision-Machined Billet-Aluminum Injector With Integral Check Valve; Three Interchangeable Injector Nozzles To Cover A Wide Variety Of Hp Levels (250Cc/Min, 500Cc/Min And 1,000Cc/Min); Tank-Less 35 Psi Boost Dependent Gas Water/Methanol System.
Wiring Harness Is Terminated With A Positive-Lock Connector On One End With Color-Coded Wires To Ease Installation, Power And Ground Wires For The Pump And Additional Wire For Optional On/Off Fluid Solenoid.
Features
- Boost Dependent controller features on-board MAP sensor with large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs
- Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, power and ground wires for the pump and additional wire for optional on/off fluid solenoid
- Pump does not cycle on/off and provides quiet, smooth operation; it features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery
- Precision-machined billet-aluminum injector with integral check valve; three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500cc/min and 1,000cc/min); tank-less 35 PSI Boost dependent gas water/methanol system
- See more on Amazon...
First Available: 11/20/2013
Brand: AEM | Manufacturer: AEM
Dimensions: 27.56 x 27.56 x 19.69 inches | Weight: 8.40 Pounds
Warranty: 1 Year
See On Amazon #14
AEM 30-2853 High Output IGBT Inductive Smart Ignition Coil Universal SET OF 4
Asin: B01MZG52NY | Ean: 0796716573692 | UPC: 796716573692
The Full Energy Delivery And Long Duration Of Aem’S High-Output Inductive Coils Eliminate The Need To Compromise Energy Or Duration With Your Ignition System, And Will Increase Performance In High-Boost Or High Compression Engines...
Less Expensive Than Aftermarket Ls1 Coils..
Aem’S High-Output Inductive Coils Deliver Cdi-Like Spark Energy With The Long Duration Of An Inductive Coil, And Easily Install In Place Of Your Exiting Coils Without The Need To Add A Cdi..
Aem’S High-Output Inductive Coils Each Deliver Over 100Mj Of Spark Energy And A Minimum Of 40,000 Volts—As Much As Most Cdi Systems, Without The Need For A Cdi Module!.
Features
- Includes a pack of 4 coils.
- AEM s High-Output Inductive Coils each deliver over 100mJ of spark energy and a minimum of 40,000 Volts as much as most CDI systems, without the need for a CDI module!
- The full energy delivery and long duration of AEM s High-Output Inductive Coils eliminate the need to compromise energy or duration with your ignition system, and will increase performance in high-boost or high compression engines..
- AEM s High-Output Inductive Coils deliver CDI-like spark energy with the long duration of an inductive coil, and easily install in place of your exiting coils without the need to add a CDI.
- Less expensive than aftermarket LS1 coils.
- See more on Amazon...
Brand: AEM | Manufacturer: AEM Electronics
Dimensions: 5.00 x 5.00 x 4.00 inches | Weight: 3.00 Pounds
See On Amazon #15
AEM (30-3305) V2 Multi-Input Water/Methanol Injection Standard Controller Kit
Asin: B00GSIBC4G | Model: 30-3305 | PartNumber: 30-3305 | Ean: 0840879022693 | UPC: 840879022693
Methanol Is A Toxic And Highly Flammable Chemical; 100 Percent Methanol Ignites Easily And Burns Vigorously With An Almost Undetectable Flame.
Aem Strongly Recommends That Users Never Exceed A 50 Percent Methanol Concentration When Using Any Aem Water Methanol System Or Component.
Features
- Legal in California only for racing vehicles which may never be used upon a highway
- AEM strongly recommends that users never exceed a 50 percent methanol concentration when using any AEM Water Methanol system or component
- Methanol is a toxic and highly flammable chemical; 100 percent Methanol ignites easily and burns vigorously with an almost undetectable flame
- See more on Amazon...
First Available: 11/20/2013
Brand: AEM | Manufacturer: AEM
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 1.50 Pounds
Warranty: 1 Year
See On Amazon #16
AEM (30-3301) V2 5-Gallon Water/Methanol Injection Kit with HD Controller and Internal MAP Sensor
Asin: B00GSIB55W | Model: 30-3301 | PartNumber: 30-3301 | Ean: 0840879022624 | UPC: 840879022624
Heavy-Duty High-Pressure Injection Pump Features Integral Fittings, A Santoprene Diaphragm And Epdm Seals To Resist Corrosion; Pump's Quiet, Smooth Operation Is Almost Undetectable.
5 Gallon Tank With Anti-Slosh Technology And High Tech Conductive Low-Fluid Sensor With Positive Lock Connector 20 Feet Of Nylon Injection Tubing Included Led Dash Light For System Status And Low Fluid Warning.
Two Precision-Machined Billet-Aluminum Injectors With Integral Check Valves Include Multiple Nozzles To Cover A Wide Range Of Horsepower Levels (500Cc/Min And Two 1,000Cc/Min).
Wiring Harness Is Terminated With A Positive-Lock Connector On One End With Color-Coded Wires To Ease Installation, Integrated Pump Ground Circuit And Additional Wire For Optional On/Off Solenoid.
Features
- Boost Dependent HD controller features large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs
- Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, integrated pump ground circuit and additional wire for optional on/off solenoid
- Heavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion; pump's quiet, smooth operation is almost undetectable
- Two precision-machined billet-aluminum injectors with integral check valves include multiple nozzles to cover a wide range of horsepower levels (500cc/min and two 1,000cc/min)
- 5 gallon tank with anti-slosh technology and high tech conductive low-fluid sensor with positive lock connector 20 feet of Nylon injection tubing included LED dash light for system status and low fluid warning
- See more on Amazon...
First Available: 11/20/2013
Brand: AEM | Manufacturer: AEM
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 14.60 pounds
Warranty: 1 Year
See On Amazon #17
AEM Water Methanol Injection 200psi Recirculation Pump with 3/8 NPT Fittings
Asin: B01F65KT0Y | Model: 30-3018 | PartNumber: 30-3018 | Ean: 0840879025168 | UPC: 840879025168
Brand: AEM | Manufacturer: AEM Electronics
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 Pounds
Warranty: Manufacturer warranty
See On Amazon #18
AEM 30-2062 20 Amp Relay Wiring Kit
Asin: B01BI2PQUM | Model: 30-2062 | PartNumber: 30-2062 | Ean: 0840879024260 | UPC: 840879024260
First Available: 02/05/2016
Brand: AEM | Manufacturer: AEM
Dimensions: 1.50 x 8.25 x 7.00 inches | Weight: 0.55 Pounds
Warranty: 12 Months
See On Amazon #19
30-2130-500 AEM 500 PSIg Stainless Sensor Kit
Asin: B001DX7K24 | Model: 30-2130-500 | PartNumber: 30-2130-500 | Ean: 0840879015190, 0213801349784 | UPC: 840879015190, 213801349784
Connector And Pins Included.
High-Quality Sealed Sensor Housings Are Virtually Impervious To Automotive Fluids (360-Degree Welded Wetted Area).
Features
- Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
- High-quality sealed sensor housings are virtually impervious to automotive fluids (360-degree welded wetted area)
- Connector and pins included
- See more on Amazon...
Brand: AEM | Manufacturer: AEM
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.22 Pounds
Warranty: 12 Months
See On Amazon
Looking For Something Else?
Search