Legines Brass Flare Fitting, SAE 45 Degree Male Run Tee, 3/8" NPT Male x 3/8" SAE Male, Pack of 2
Asin: B0771M9HWN | Ean: 6937997003049
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
45-Degree Flared Construction For A Stronger Connection Than Soldered.
Forged Nuts For Refrigeration Applications.
Features
- Tee with three openings for connecting and branching three pipes
- Forged nuts for refrigeration applications
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- 45-degree flared construction for a stronger connection than soldered
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
See On Amazon Similar To Legines Brass Flare Fitting SAE
#1
Legines Brass Pipe Fitting Hex Bushing, 3/8" NPT Male to 1/4" NPT Female 1200psi (2pcs)
Asin: B0747LL11P | Model: 3220*CB | PartNumber: 3220*CB | Ean: 6612145749948
Legines Pipe Fittings Are Made Of Ca360 Or Ca377 Brass, Not Ordinary Copper Alloy, And Meet Sae Standard, Have Dryseal Threads, Forgings & Extruded..
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Operating Pressure Of Our Fittings Is Up To 1200Psi, More Higher Than Other General Fittings. Temperatures Range From -53 To 121 Degrees C (-65 To 250 Degrees F).
3/8" Male Npt Threads On One End And 1/4" Female Npt Threads On The Other For Connecting Pipes With Different Ends.
Features
- Hex bushing for connecting two pipes with different diameters
- 3/8 Male NPT threads on one end and 1/4 female NPT threads on the other for connecting pipes with different ends
- Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded.
- Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
Dimensions: 3.94 x 3.94 x 3.94 inches | Weight: 0.07 Pounds
See On Amazon #2
Legines NPT Bushing 3/8" Male x 1/4" Female Reducing Adapter Hex Head Pipe Fitting (Pack of 5)
Asin: B07L4HF8QG | Model: 3220 | PartNumber: 3220 | Ean: 0745396598204 | UPC: 745396598204
Legines Pipe Fittings Are Made Of Ca360 Or Ca377 Brass, Not Ordinary Copper Alloy, And Meet Sae Standard, Have Dryseal Threads, Forgings & Extruded..
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Operating Pressure Up To 1200Psi, Temperature Range Of -65 To 250 Degrees F.
3/8" Male Npt Threads On One End And 1/4" Female Npt Threads On The Other For Connecting Pipes With Different Ends.
Features
- Hex bushing for connecting two pipes with different diameters
- 3/8 Male NPT threads on one end and 1/4 female NPT threads on the other for connecting pipes with different ends
- Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded.
- Operating pressure UP to 1200psi, Temperature range of -65 to 250 degrees F
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
Dimensions: 3.94 x 3.94 x 3.94 Inches | Weight: 0.04 pounds
See On Amazon #3
Legines Brass Pipe Fitting, Adapter 3/8" NPT Female to 1/4" NPT Male Reducing Adaptor 1200psi High Presure (Pack of 2)
Asin: B07485YLYW | Model: 3200 | PartNumber: 3200 | Ean: 6612145750067
Legines Pipe Fittings Are Made Of Ca360 Or Ca377 Brass, Not Ordinary Copper Alloy, And Meet Sae Standard, Have Dryseal Threads, Forgings & Extruded..
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Operating Pressure Of Our Fittings Is Up To 1200Psi, More Higher Than Other General Fittings. Temperatures Range From -53 To 121 Degrees C (-65 To 250 Degrees F).
1/4" Male National Pipe Taper (Npt) Threads On One End And 3/8" Female Npt Threads On The Other For Connecting Pipes With Different Ends.
Features
- Reducing adapter allows for connecting and extending different size pipes or fittings, can be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections as well as air tools
- 1/4 Male National Pipe Taper (NPT) threads on one end and 3/8 female NPT threads on the other for connecting pipes with different ends
- Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded.
- Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
Dimensions: 3.94 x 3.94 x 3.94 inches | Weight: 0.09 Pounds
See On Amazon #4
Legines Brass 1/8" NPT Female 1/8" NPT Female Coupling Coupler Hex Head Pipe Fitting 1200psi (Pack of 2)
Asin: B07487DR2Q | Ean: 6612145750258
Legines Pipe Fittings Are Made Of Ca360 Or Ca377 Brass, Not Ordinary Copper Alloy, And Meet Sae Standard, Have Dryseal Threads, Forgings & Extruded..
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Operating Pressure Of Our Fittings Is Up To 1200Psi, More Higher Than Other General Fittings. Temperatures Range From -53 To 121 Degrees C (-65 To 250 Degrees F).
1/8" Female National Pipe Taper (Npt) Threads For Connecting To 1/8" Male Threaded Pipes..
Features
- Coupling for connecting two pipes with the same diameter in a straight run
- 1/8 Female National Pipe Taper (NPT) threads for connecting to 1/8 male threaded pipes.
- Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded.
- Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
Dimensions: 3.94 x 3.94 x 3.94 inches | Weight: 0.07 Pounds
See On Amazon #5
Legines Brass Compression Tube Fitting, Union, 1/4" OD x 1/4" OD Coupler, Pack of 2
Asin: B075L98VNH | Ean: 6208252173198
Use With Copper,Aluminum And Thermoplastic Tub-Ing.Not Recommended For Steel Tubing..
Meets Specifications And Standards Of Asa, Asme Asn Sae..
Not Recommended For Application Using Gas Eous Media..
Manufactured For Low And Medium Pressure Tubing Connection Work Where Excessive Vibration Or Tube Movement Is Not Involved..
Features
- Three piece construction - nut, sleeve and body with attached insert Use with copper, brass, aluminum, or plastic tubing
- Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved.
- Use with copper,aluminum and thermoplastic tub-ing.Not recommended for steel tubing.
- Not recommended for application using gas eous media.
- Meets specifications and standards of ASA, ASME asn SAE.
- See more on Amazon...
Brand: Legines | Manufacturer: 62
Dimensions: 4.33 x 5.51 x 1.97 inches | Weight: 0.11 Pounds
See On Amazon #6
Legines Brass Pipe Fitting Long Nipple, 1/4" NPT Male x 1/4" NPT Male Extender Straight Connector, 1-1/2"Length 1200psi (Pack of 5)
Asin: B07L5HNKQC | Model: 3330 | PartNumber: 3330 | Ean: 0745396598457 | UPC: 745396598457
Legines Pipe Fittings Are Made Of Ca360 Or Ca377 Brass, Not Ordinary Copper Alloy, And Meet Sae Standard, Have Dryseal Threads, Forgings & Extruded..
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Operating Pressure Of Our Fittings Is Up To 1200Psi, More Higher Than Other General Fittings. Temperatures Range From -53 To 121 Degrees C (-65 To 250 Degrees F).
1/4" Male National Pipe Taper (Npt) Threads For Connecting To 1/4" Female Threaded Pipes.
Features
- Long nipple for connecting two threaded pipes and extending pipe length
- 1/4 Male National Pipe Taper (NPT) threads for connecting to 1/4 female threaded pipes
- Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded.
- Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
Dimensions: 3.94 x 3.94 x 3.94 inches | Weight: 0.11 Pounds
See On Amazon #7
Legines Brass Reducing Coupling 1/2" NPT Female x 1/4" NPT Female, Hex Reducer Coupler Adapter Pipe Fitting 1200psi (Pack of 2)
Asin: B07487LP8X | Ean: 6612145750210
Legines Pipe Fittings Are Made Of Ca360 Or Ca377 Brass, Not Ordinary Copper Alloy, And Meet Sae Standard, Have Dryseal Threads, Forgings & Extruded..
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Operating Pressure Of Our Fittings Is Up To 1200Psi, More Higher Than Other General Fittings. Temperatures Range From -53 To 121 Degrees C (-65 To 250 Degrees F).
1/2" Female National Pipe Taper (Npt) Threads On One End And 1/4" On Another..
Features
- Reducing Coupling for connecting two different size male threaded pipes
- 1/2 Female National Pipe Taper (NPT) threads on one end and 1/4 on another.
- Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded.
- Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
Dimensions: 3.94 x 3.94 x 3.94 inches | Weight: 0.35 pounds
See On Amazon #8
Legines Brass Flared Plug 3/8" Tube OD, SAE 45 Degree Flare Tube Fitting Pack of 2
Asin: B074Z5RND6 | Model: 39×6 | PartNumber: 39×6 | Ean: 6712441373332
For Use With Lp And Natural Gas, Refrigeration, And Hydraulic Applications.
Low Cost And Reusability, Long Or Short Nut. Good Resistance To Vibration..
Used With: Copper, Brass, Aluminum And Steel Hydraulic Tubing That Can Be Flared..
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
Features
- Hex plug with SAE 45-degree flare male end terminates tube size fitting
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- For use with LP and natural gas, refrigeration, and hydraulic applications
- Used With: Copper, brass, aluminum and steel hydraulic tubing that can be flared.
- Low cost and reusability, long or short nut. Good resistance to vibration.
- See more on Amazon...
Brand: Legines | Manufacturer: legines
Dimensions: 4.33 x 5.51 x 3.94 inches
See On Amazon #9
Minimprover 2 PCS Brass 3/8" Female Flare by 3/8" Female Flare Swivel Brass Adapter,Female Swivel Nut,Flare Tube Fitting,Valve Connector
Asin: B08BLL5CR5 | Ean: 0779880498688, 0779605311377 | UPC: 779880498688, 779605311377
★ 【Application】: Lp And Natural Gas, Flammable Liquids (Special Order), Instrumental, Refrigeration. Power Steering, Hydraulic And Pneumatic Systems.Not For Use In Potable Drinking Water Applications..
★ 【Package Include】: 2 Pcs 3/8" Female Flare By 3/8" Female Flare Adapter. Comes With 1 Year Guarantee..
★ 【Size】:3/8" Female Flare By 3/8" Female Flare Swivel Union..
★ 【Advantage】: The Positive Nature Of The Connection With The Flare On The Tube Clamped Between The Nut And The Body Makes For Extreme Dependability And Safety..
Features
- Material : Made of premium solid brass with a longer service life, stronger and more durable than iron and iron galvanized pipe fittings.
- Advantage : The positive nature of the connection with the flare on the tube clamped between the nut and the body makes for extreme dependability and safety.
- Application : LP and natural gas, flammable liquids (special order), instrumental, refrigeration. power steering, hydraulic and pneumatic systems.Not for use in potable Drinking water applications.
- SIZE :3/8 female flare by 3/8 female flare Swivel union.
- Package Include : 2 PCS 3/8 female Flare by 3/8 female flare adapter. Comes with 1 year guarantee.
- See more on Amazon...
Brand: Minimprover | Manufacturer: Minimprover
Weight: 0.10 Pounds
See On Amazon #10
Legines Brass Pipe Fitting Long Nipple, 1/8" NPT Male x 1/8" NPT Male Extender Straight Connector, 1-1/2"Length 1200psi (Pack of 5)
Asin: B07L5HLNGN | Model: 3330 | PartNumber: 3330 | Ean: 0745396598440 | UPC: 745396598440
Legines Pipe Fittings Are Made Of Ca360 Or Ca377 Brass, Not Ordinary Copper Alloy, And Meet Sae Standard, Have Dryseal Threads, Forgings & Extruded..
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Operating Pressure Of Our Fittings Is Up To 1200Psi, More Higher Than Other General Fittings. Temperatures Range From -53 To 121 Degrees C (-65 To 250 Degrees F).
1/8" Male National Pipe Taper (Npt) Threads For Connecting To 1/8" Female Threaded Pipes.
Features
- Long nipple for connecting two threaded pipes and extending pipe length
- 1/8 Male National Pipe Taper (NPT) threads for connecting to 1/8 female threaded pipes
- Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded.
- Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
Dimensions: 3.94 x 3.94 x 3.94 inches | Weight: 0.11 Pounds
See On Amazon #11
Legines 3/8" Flare Cap, Brass SAE 45 Degree Flare Tube Fitting, Pack of 2
Asin: B07715N52T | Ean: 6937997002707
Flare Fittings On The End Of Copper Tubing Should Provide A Strong Connection To A Fixed Point With A Threaded Nipple..
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Used For Fuel, Oil, Air, Propane, Liquid Petroleum (Lp) And Natural Gas Lines Connections.
It Is Important To Use Flare Fittings When You Are Dealing With A Lot Of Water Pressure Going Through A Pipe Or Are Dealing With High Gas Distribution..
Features
- Flare cap for terminating/closing pipe end
- It is important to use flare fittings when you are dealing with a lot of water pressure going through a pipe or are dealing with high gas distribution.
- Flare fittings on the end of copper tubing should provide a strong connection to a fixed point with a threaded nipple.
- Used for fuel, oil, air, propane, liquid petroleum (LP) and natural gas lines connections
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
See On Amazon #12
Legines 2pcs Barb Union 5/16" Barbed x 5/16" Barbed Splicer Brass Hose Fitting Mender Joiner
Asin: B07538WBNK | Model: 121-5 | PartNumber: 121-5 | Ean: 6208252172696
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Barbed Fitting For A Tight Seal On Hoses.
Connects To A Hose On Both Ends.
Features
- Union coupling for connecting two hoses with the same diameter in a straight run
- Connects to a hose on both ends
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Barbed fitting for a tight seal on hoses
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
Dimensions: 4.33 x 5.12 x 1.97 inches | Weight: 0.04 Pounds
See On Amazon #13
Legines Brass Pipe Fitting Hex Head Plug, 1/8" NPT Male, 1200psi High Pressure (Pack of 5)
Asin: B074JZQWXC | Model: 3152*A | PartNumber: 3152*A | Ean: 6692171585673
Legines Pipe Fittings Are Made Of Ca360 Or Ca377 Brass, Not Ordinary Copper Alloy, And Meet Sae Standard, Have Dryseal Threads, Forgings & Extruded..
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A...
Operating Pressure Of Our Fittings Is Up To 1200Psi, More Higher Than Other General Fittings. Temperatures Range From -53 To 121 Degrees C (-65 To 250 Degrees F).
1/8" Npt Male Pipe Threads For Connecting To Female Threaded Pipes Or Fittings.
Features
- Cored plug with a hex drive for closing the end of a pipe or fitting.
- 1/8 NPT Male pipe threads for connecting to female threaded pipes or fittings
- Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded.
- Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A..
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
Dimensions: 3.94 x 3.94 x 3.94 inches | Weight: 0.04 Pounds
See On Amazon #14
Legines Brass Pipe Fitting Cap 1/2" NPT Female Hex Head 1200psi High Pressure (Pack of 2)
Asin: B0746HVDQ5 | Model: 3129*D | PartNumber: 3129*D | Ean: 6612145749900
Legines Pipe Fittings Are Made Of Ca360 Or Ca377 Brass, Not Ordinary Copper Alloy, And Meet Sae Standard, Have Dryseal Threads, Forgings & Extruded..
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Operating Pressure Of Our Fittings Is Up To 1200Psi, More Higher Than Other General Fittings. Temperatures Range From -53 To 121 Degrees C (-65 To 250 Degrees F).
1/2" Female Npt Threads For Connecting To Male Threaded Pipes.
Features
- Cap for terminating male pipe or fitting.
- 1/2 Female NPT threads for connecting to male threaded pipes
- Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded.
- Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
Dimensions: 4.33 x 5.12 x 1.97 inches | Weight: 0.22 Pounds
See On Amazon #15
Legines Brass Reducing Hex Nipple, 1/2" NPT Male x 3/8" NPT Male Straight Connector Pipe Fitting 1200psi (Pack of 2)
Asin: B07478SV9F | Model: 3325*DC | PartNumber: 3325*DC | Ean: 6775627277268
Legines Pipe Fittings Are Made Of Ca360 Or Ca377 Brass, Not Ordinary Copper Alloy, And Meet Sae Standard, Have Dryseal Threads, Forgings & Extruded..
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. An.
Operating Pressure Of Our Fittings Is Up To 1200Psi, More Higher Than Other General Fittings. Temperatures Range From -53 To 121 Degrees C (-65 To 250 Degrees F).
1/2" Male Npt Threads On One End And 3/8" Male Npt Threads On Another..
Features
- Reducing hex nipple for connecting two threaded pipes with different diameters
- 1/2 Male NPT threads on one end and 3/8 Male NPT threads on another.
- Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded.
- Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. an
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
Dimensions: 3.94 x 3.94 x 3.94 inches | Weight: 0.20 Pounds
See On Amazon #16
LitOrange 4 PCS Brass 1/4" Flare Male x 1/4 Inch Male Flare Tube Coupler Pipe Fitting & 2 PCS 1/4" x 1/4" Female Flare Swivel Brass Adapter Female Swivel Nut,Flare Tube Fitting(Pack of 6)
Asin: B094JNQS7B
★ 【Application】: Lp And Natural Gas, Flammable Liquids (Special Order), Instrumental, Refrigeration. Power Steering, Hydraulic And Pneumatic Systems.Not For Use In Potable Drinking Water Applications..
★ 【Package Include】: 4 Pcs 1/4" Male Flare X 1/4" Male Flare & 2 Pcs 1/4" Female Flare By 1/4" Female Flare Adapter. Comes With 1 Year Guarantee..
★ 【Temperature Range】: From -53°C To 121°C (-65 To 250 Degree F)..
★ 【Firm And Durable】: Litorange Brass For Corrosion Resistance, High Temperature Ductility And Low Magnetic Permeability..
Features
- Material : Made of premium solid brass with a longer service life, stronger and more durable than iron and iron galvanized pipe fittings.
- Firm And Durable : Litorange Brass for corrosion resistance, high temperature ductility and low magnetic permeability.
- Application : LP and natural gas, flammable liquids (special order), instrumental, refrigeration. power steering, hydraulic and pneumatic systems.Not for use in potable Drinking water applications.
- Temperature Range : From -53 C to 121 C (-65 to 250 Degree F).
- Package Include : 4 PCS 1/4 Male Flare x 1/4 Male Flare & 2 PCS 1/4 Female Flare by 1/4 Female Flare adapter. Comes with 1 year guarantee.
- See more on Amazon...
Brand: LitOrange | Manufacturer: LitOrange
See On Amazon #17
Anderson Metals 54014-04 Brass Tube Fitting, Short Flare Nut, 1/4" Tube OD, Copper
Asin: B002SAMEGS | Model: 54014-04 | PartNumber: 54014-04 | Ean: 0719852934608 | UPC: 719852934608
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
Resists Mechanical Pullout For A More Secure Connection.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Operating Temperature Range Of -65 To +250 Degrees F.
Connects To Copper, Brass, Aluminum, Or Steel Tubing.
Features
- Short flare nut for connecting to a tube or fitting
- Connects to copper, brass, aluminum, or steel tubing
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Operating temperature range of -65 to +250 degrees F
- Resists mechanical pullout for a more secure connection
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: ANDERSON | Manufacturer: Anderson Metals
Dimensions: 1.00 x 1.00 x 1.00 inches | Weight: 0.02 pounds
See On Amazon #18
(Pack of 4) EFIELD Brass Tube Flare Fittings, Half-Union, 3/8 in. Flare x 3/8 in. Male Pipe
Asin: B095H42ZPG | Model: B095H42ZPG | PartNumber: B095H42ZPG | Ean: 0791689823591 | UPC: 791689823591
Suitable For Lp And Natural Gas, Refrigeration, And Hydraulic Application In Low And Medium Pressure Pipe Line Connections.
The Fitting Has The Protection Cap.
Temperature Range: 121°C To 250 Degree F.
4 Pcs Brass Tube Fitting, Half-Union, 3/8 In. Flare X 3/8 In. Male Pipe For Propane Fitting Brass. Made For Corrosion Resistance, High Temperature Ductility And Low Permeability..
Features
- Directly Supplied by One of the Biggest Plumbing systems Manufacturers
- 4 PCS Brass Tube Fitting, Half-Union, 3/8 in. Flare x 3/8 in. Male Pipe for Propane Fitting Brass. Made for Corrosion Resistance, High Temperature Ductility and Low Permeability.
- Suitable for LP and Natural gas, Refrigeration, and Hydraulic Application in Low and Medium Pressure Pipe Line Connections
- Temperature Range: 121 C to 250 Degree F
- The fitting has the Protection Cap
- See more on Amazon...
Brand: EFIELD | Manufacturer: Efield
Dimensions: 0.40 x 2.00 x 2.00 inches
See On Amazon #19
Highcraft G41T-12-5 Brass Flat Short Nut for Flare Pipe Fittings 1/2" O.D. Connection (5 Pack)
Asin: B09LK5HFWY | Model: G41T-12-5 | PartNumber: G41T-12-5 | Ean: 0804595402863 | UPC: 804595402863
Superior Quality: Highly Durable Brass Construction; Rust Resistant; Corrosion Resistant; Vibration Resistant.
Specifications: 1/2" Od. Flare Connections; Temperature -65°F Thru 250°F @ Max Pressures; Low Lead- Not For Potable Water.
Easy Installation; Reusable; Versatile.
Leak-Free: Creates A Secure, Leak Free Seal In High Pressure And Vibrating Applications.
Features
- FLARE CONNECTOR: Secures all Flare Connections within Fuel, Oil, LP, and Natural Gas Applications; Works with Aluminum, Copper, Brass, and Welded Steel Tubing That Can Be Flared.
- LEAK-FREE: Creates a Secure, Leak Free Seal in High Pressure and Vibrating Applications
- SUPERIOR QUALITY: Highly Durable Brass Construction; Rust Resistant; Corrosion Resistant; Vibration Resistant
- EASY INSTALLATION; REUSABLE; VERSATILE
- SPECIFICATIONS: 1/2 OD. Flare Connections; Temperature -65 F thru 250 F @ Max Pressures; Low Lead- Not for Potable Water
- See more on Amazon...
Brand: HIGHCRAFT | Manufacturer: Highcraft
Dimensions: 1.50 x 1.50 x 0.50 inches
See On Amazon #20
HANSUM 3/8 Male Flare Gas Adapter Metals Brass Fittings for Copper Tubing Pipe Half Union Connector Coupling AC Tube Coupler Extension Joint Connectors Mini Split (3/8"Male Flare,2packs)
Asin: B0BZHDQWBM | Model: Flare008 | PartNumber: Flare008
[Wide Range Of Applications:] Perfect For Use With Grease, Fuels, Lp And Natural Gas, Refrigeration, Instrumentation And Hydraulic Systems In Low And Medium Pressure Pipe Line Connections.Suitable For Natural Gas And Liquefied Petroleum Gas, Refrigeration And Hydraulics.And Suitable For Aluminium, Steel Pipe, Copper, Brass Or Plastic Pipe.The Joint Is Used To Lengthen The Copper Pipe, It Can Be Used When Bought Back, No Welding Required..
[Temperature Range]: -53 To 121 °C (-65 To 250 °F).
[Package Includes]: 2 Pcs 3/8 Male Flare.
[Features:] The Joint Is Used To Extend The Copper Pipe, It Can Be Used When Bought Back, No Welding Required.This Pipe Fitting Is Precisely Milled, Threads Are Tighter, Deeper, Smoother Than Regular Products, Making Work Easier And More Efficient.Both Ends Of This Joint Have 45 Degree Flare Connection, Which Has Multiple Functions And Is Convenient For Installation And Disassembly.It Is Easier To Connect And Disconnect The Two Pipes Than A Coupling..
Features
- [Material]:pure copper fittings.Premium solid brass material for corrosion resistance,high temperature ductility and low magnetic permeability.Our brass tube fitting is durable and long service life.
- [Features:] The joint is used to extend the copper pipe, it can be used when bought back, no welding required.This pipe fitting is precisely milled, threads are tighter, deeper, smoother than regular products, making work easier and more efficient.Both ends of this joint have 45 degree flare connection, which has multiple functions and is convenient for installation and disassembly.It is easier to connect and disconnect the two pipes than a coupling.
- [Wide range of applications:] Perfect for use with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections.Suitable for natural gas and liquefied petroleum gas, refrigeration and hydraulics.And suitable for aluminium, steel pipe, copper, brass or plastic pipe.The joint is used to lengthen the copper pipe, it can be used when bought back, no welding required.
- [Package includes]: 2 PCS 3/8 Male Flare
- [Temperature range]: -53 to 121 C (-65 to 250 F)
- See more on Amazon...
Brand: HANSUM | Manufacturer: HANSUM
Dimensions: 0.80 x 1.60 x 0.80 inches | Weight: 0.07 Pounds
See On Amazon
Looking For Something Else?
Search