DCT 4-Way Pressure Release Clamp Wood Panel Corner Clamping System Woodworking Bracket Set For Stock up to 6 Inches
Asin: B077378HVZ | Model: 9244 | PartNumber: 9244 | Ean: 0688295879244 | UPC: 688295879244
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Easy To Use: Assembly Instructions Included; More Convenient Than Lining Up Standard Clamps And Cauls; Attach Notched Bars To Any Length 1.5-Inch X 1.75-Inch (3.2Cm X 4.4Cm) Board (Equivalent To A 2X4 Ripped In Half) With Provided Screws, Set Clamp And Turn Handle To Tighten (On Large Pieces, We Recommend One Clamp Every 18 Inches/45.7Cm For Maximum Clamping Efficiency); Make Sure The 2X4s You Use Are Not Twisted; Drill Pilot Holes For The Outer-Most Screws When Attaching The Pressure Pads.
Contents: Package Includes (2) 12.75-Inch Long Notch Bars, (2) 6.9-Inch Long Notch Bars, (1) Clamp Assembly Head, (1) Clamp Assembly Tail, (16) Assembly Screws (4X 3/8-Inch, 12X 1-1/4-Inch L), And Assembly Instructions; 1 Set With 1 Clamp (Multiples Needed For Projects Over Approximately 2 Feet/61Cm); Wood Required, Not Included.
Adjusts To Your Project: Build Any Length Clamp With The Durable Plastic Bars With 12 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths; Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches; Turn The Handle To Tighten The Clamp And Unwind The Turn Handle To Release Pressure; Clamp Has Pressure Pads To Prevent Damage To The Edge Of Your Stock.
4-Way: Stock Stays Flat And Prevents Buckling Of Boards During Glue-Up Because Of The Equally Applied Pressure From All Four Directions (Top, Bottom, And Both Sides); Ideal For Gluing Table Tops, Shelving, Veneer, Laminates; Durable Clamp Only Limited By The Quality Of Prep And Glue Used.
Features
- LARGE PANEL GLUE-UPS: The DCT 4-Way Pressure Release Clamp Wood Panel Corner Clamping System Woodworking Bracket Set handles stock up to 6 inches (15.2cm) thick for simplifying the process of gluing table tops, countertops, furniture panels, cabinet doors, and more and saves you from using additional clamps to keep the glue-ups straight
- 4-WAY: Stock stays flat and prevents buckling of boards during glue-up because of the equally applied pressure from all four directions (top, bottom, and both sides); Ideal for gluing table tops, shelving, veneer, laminates; Durable clamp only limited by the quality of prep and glue used
- EASY TO USE: Assembly instructions included; More convenient than lining up standard clamps and cauls; Attach notched bars to any length 1.5-inch x 1.75-inch (3.2cm x 4.4cm) board (equivalent to a 2x4 ripped in half) with provided screws, set clamp and turn handle to tighten (on large pieces, we recommend one clamp every 18 inches/45.7cm for maximum clamping efficiency); Make sure the 2x4s you use are not twisted; Drill pilot holes for the outer-most screws when attaching the pressure pads
- ADJUSTS TO YOUR PROJECT: Build any length clamp with the durable plastic bars with 12 notches for maximum adjustability to handle a variety of stock widths; Clamp can be used for boards up to 6 inches in thickness by simply adjusting the clamp width capacity with the appropriate number of notches; Turn the handle to tighten the clamp and unwind the turn handle to release pressure; Clamp has pressure pads to prevent damage to the edge of your stock
- CONTENTS: Package includes (2) 12.75-inch long notch bars, (2) 6.9-inch long notch bars, (1) clamp assembly head, (1) clamp assembly tail, (16) assembly screws (4x 3/8-inch, 12x 1-1/4-inch L), and assembly instructions; 1 set with 1 clamp (multiples needed for projects over approximately 2 feet/61cm); Wood required, not included
- See more on Amazon...
Brand: Deadwood Crafted Tools | Manufacturer: Deadwood Crafted Tools
Dimensions: 6.60 x 4.60 x 13.80 inches | Weight: 4.56 pounds
Warranty: This product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.
See On Amazon Similar To DCT 4Way Pressure Release Clamp
#1
Roadformer 4" T-Bolt Hose Clamp - Working Range 108mm - 116mm for 4" Hose ID, Stainless Steel Bolt, Stainless Steel Band Floating Bridge and Nylon Insert Locknut (108mm - 116mm, 2 pack)
Asin: B07M6K6B5V | Model: R400TBSS | PartNumber: R400TBSS | Ean: 0735551429078 | UPC: 735551429078
It’S Better To Check Your Hose Od To Fit The Working Range Before Purchasing. Roadformer T-Bolt Band Clamps Are Designed To Provide Connections Without Leaks..
2 Pieces In Package - Roadformer Private Label Products Set Industry Standard With Premium Quality.
Roadformer High Quality T-Bolt Clamp Performance-Engineered For Long-Term Durability. T Bolt Clamp Provides Leak-Proof Connections In A Wide Variety Applications Of Industrial, Automotive And Special Equipment.
4" T Hose Clamp Working Range Diameter: 4.25" - 4.57" Same As 108Mm - 116Mm For 4 Inch Hose I.D. - Not O.D..
Features
- Roadformer 4" T Bolt hose clamps: 1/4"-28 300-Series SS Bolt, 3/4" Band in 300-Series SS Floating Bridge and Nylon insert locknut
- 4 T Hose Clamp Working Range Diameter: 4.25 - 4.57 same as 108mm - 116mm for 4 inch Hose I.D. - not O.D.
- It s better to check your Hose OD to fit the working range before purchasing. Roadformer T-Bolt band clamps are designed to provide connections without leaks.
- Roadformer high quality T-bolt clamp performance-engineered for long-term durability. T bolt Clamp provides leak-proof connections in a wide variety applications of Industrial, Automotive and Special Equipment
- 2 Pieces in Package - Roadformer private label products set industry Standard with Premium Quality
- See more on Amazon...
Brand: ROADFORMER | Manufacturer: Roadformer
Dimensions: 1.00 x 5.00 x 4.00 inches
See On Amazon #2
Peachtree Woodworking Supply 2 Pack of 4 Way Pressure Clamps For Clamping Panels - Using Pressure From All Four Directions. For Woodworkers, Cabinet and Furniture Makers (2 four way pressure clamps)
Asin: B073QSF8JR | Model: 666 | PartNumber: 666
Build Any Length Clamp With The Durable Plastic Bars With 4 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths. Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches. Turn The Handle Clockwise To Tighten The Clamp And Turn The Handle Counter Clockwise To Release Pressure. The 4 Way Pressure Clamp Is Equipped With Side Pressure Pads To Prevent Damaging Your Stock..
This Clamp Package Comes With Two Full 4 Way Pressure Clamp Assemblies. Includes: 2 Each Rotating Handle Assemblies, 2 Each Tailstock Assemblies, 4 Each Side Pressure Pads And 12 Each 4 Notch Bars. Together, This Setup Will Allow You To Create Two 4 Way Pressure Clamps. More Than One Clamp Is Generally Recommended For Any Project Over 12” In Length. Wood Is Required For Setting Up The Clamp. Wood Is Not Included..
Now You Can Confidently Glue Up Wide Boards, Shelving, Table Tops, And More Up To 6” Thick. To Setup The Clamps Simply Attach The Clamp To Any Length 2 X 2’S (2” X 4” Ripped In Half) With The The Wood Screws That Are Provided, Apply Wood Glue To Your Project, Set The Clamps On To Your Panel Boards And Turn Handle To Tighten The Clamp On All Four Sides. We Recommend That You Place A 4 Way Pressure Clamp Every 12” To 18” For Best Results..
Let’S Make Racked Panel Glue Ups A Thing Of The Past! The Uniquely Designed 4 Way Pressure Solves This Age Old Issue By Applying Pressure To All Four Sides Of Your Panel Glue Up. With A Simple Turn Of The Rotating Clamp Handle, All Four Sides Of The Clamp Will Draw Inward At The Same Time. This Provides Equal Pressure On To Your Panel And Prevents Bowing, Buckling, Or Racked Panels..
Features
- Clamping panels can certainly be a challenge. Especially when we try to use everyday pipe clamps or bar clamps. While these types of clamps work fairly well on certain glue up projects, the one thing they don t do at all is apply pressure from the top and bottom of the panels during glue up. In fact, with all the pressure being applied on both sides, bar and pipe clamps will almost certainly bow, buckle or rack your panel glue up project.
- Let s make racked panel glue ups a thing of the past! The uniquely designed 4 way pressure solves this age old issue by applying pressure to all four sides of your panel glue up. With a simple turn of the rotating clamp handle, all four sides of the clamp will draw inward at the same time. This provides equal pressure on to your panel and prevents bowing, buckling, or racked panels.
- Build any length clamp with the durable plastic bars with 4 notches for maximum adjustability to handle a variety of stock widths. Clamp can be used for boards up to 6 inches in thickness by simply adjusting the clamp width capacity with the appropriate number of notches. Turn the handle clockwise to tighten the clamp and turn the handle counter clockwise to release pressure. The 4 way pressure clamp is equipped with side pressure pads to prevent damaging your stock.
- Now you can confidently glue up wide boards, shelving, table tops, and more up to 6 thick. To setup the clamps simply attach the clamp to any length 2 x 2 s (2 x 4 ripped in half) with the the wood screws that are provided, apply wood glue to your project, set the clamps on to your panel boards and turn handle to tighten the clamp on all four sides. We recommend that you place a 4 way pressure clamp every 12 to 18 for best results.
- This clamp package comes with two full 4 way pressure clamp assemblies. Includes: 2 each rotating handle assemblies, 2 each tailstock assemblies, 4 each side pressure pads and 12 each 4 notch bars. Together, this setup will allow you to create two 4 way pressure clamps. More than one clamp is generally recommended for any project over 12 in length. Wood is required for setting up the clamp. Wood is NOT included.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc..
Dimensions: 5.40 x 16.00 x 6.30 inches | Weight: 9.15 Pounds
See On Amazon #3
Peachtree Woodworking Supply 2 Pack of 4 Way Pressure Clamps For Clamping Panels - Using Pressure From All Four Directions. Ideal For Woodworkers and Cabinet and Furniture Makers
Asin: B08D1LTF65 | Model: 666 | PartNumber: 666 | Ean: 0817918020682 | UPC: 817918020682
Build Any Length Clamp With The Durable Plastic Bars With 4 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths. Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches. Turn The Handle Clockwise To Tighten The Clamp And Turn The Handle Counter Clockwise To Release Pressure. The 4 Way Pressure Clamp Is Equipped With Side Pressure Pads To Prevent Damaging Your Stock.
Now You Can Confidently Glue Up Wide Boards, Shelving, Table Tops, And More Up To 6” Thick. To Setup The Clamps Simply Attach The Clamp To Any Length 2 X 2’S (2” X 4” Ripped In Half) With The The Wood Screws That Are Provided, Apply Wood Glue To Your Project, Set The Clamps On To Your Panel Boards And Turn Handle To Tighten The Clamp On All Four Sides. We Recommend That You Place A 4 Way Pressure Clamp Every 12” To 18” For Best Results..
Let’S Make Racked Panel Glue Ups A Thing Of The Past. With A Simple Turn Of The Rotating Clamp Handle, All Four Sides Of The Clamp Will Draw Inward At The Same Time.
Features
- Clamping Panels Can Certainly Be A Challenge. Especially When We Try To Use Everyday Pipe Clamps Or Bar Clamps. While These Types Of Clamps Work Fairly Well On Certain Glue Up Projects, The One Thing They Don T Do At All Is Apply Pressure From The Top And Bottom Of The Panels During Glue Up. In Fact, With All The Pressure Being Applied On Both Sides, Bar And Pipe Clamps Will Almost Certainly Bow, Buckle Or Rack Your Panel Glue Up Project
- Let S Make Racked Panel Glue Ups A Thing Of The Past. With A Simple Turn Of The Rotating Clamp Handle, All Four Sides Of The Clamp Will Draw Inward At The Same Time
- Build Any Length Clamp With The Durable Plastic Bars With 4 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths. Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches. Turn The Handle Clockwise To Tighten The Clamp And Turn The Handle Counter Clockwise To Release Pressure. The 4 Way Pressure Clamp Is Equipped With Side Pressure Pads To Prevent Damaging Your Stock
- Now You Can Confidently Glue Up Wide Boards, Shelving, Table Tops, And More Up To 6 Thick. To Setup The Clamps Simply Attach The Clamp To Any Length 2 X 2 S (2 X 4 Ripped In Half) With The The Wood Screws That Are Provided, Apply Wood Glue To Your Project, Set The Clamps On To Your Panel Boards And Turn Handle To Tighten The Clamp On All Four Sides. We Recommend That You Place A 4 Way Pressure Clamp Every 12 To 18 For Best Results.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc..
Dimensions: 5.40 x 16.00 x 6.30 inches | Weight: 8.95 pounds
See On Amazon #4
PALOZO 4 Inch Quick Release V Band Clamp, 304 Stainless Steel V-Band Bolt Clamp
Asin: B0CNK15GD9 | Model: VBC-4 | PartNumber: VBC-4
Premium Material: V Band Clamps Are Made Of High Quality 304 Stainless Steel Has Good Corrosion Resistance And Is Not Easy To Rust, Providing A Longer Service Life.
Various Size: Various Sizes Of V Band Clamps Can Meet Your Tightening Needs Of Different Sizes.
Application: The V-Band Clamps Offer Effective Fastening Solutions In Exhaust Systems, Remove Intercooler Systems And Turbo Parts. Such As Charge Piping, Intake Pipes, Diesel Engines, Turbochargers, And Heavy-Duty Exhaust Systems.
Quick Release Design: The V Band Clamps With Quick Release Design Are Easy To Open And Close, Makes It Easy To Install And Remove The Intercooler System And Turbine Components.
Features
- Package Include: 4 Inch(102mm) Quick Release Stainless Steel V-Band Clamp
- Quick Release Design: The V Band Clamps with Quick Release Design are easy to open and close, makes it easy to install and remove the intercooler system and turbine components
- Premium Material: V Band Clamps are made of high quality 304 stainless steel has good corrosion resistance and is not easy to rust, providing a longer service life
- Application: The V-Band Clamps offer effective fastening solutions in exhaust systems, remove intercooler systems and turbo parts. such as charge piping, intake pipes, diesel engines, turbochargers, and heavy-duty exhaust systems
- Various Size: Various sizes of V Band clamps can meet your tightening needs of different sizes
- See more on Amazon...
Brand: PALOZO | Manufacturer: PALOZO
See On Amazon #5
Peachtree Woodworking 4 inch EZ-Release Hose Clamp for Dust Collection Hoses 2PK
Asin: B0036VIRCI | Model: 6119 | PartNumber: 6119 | Ean: 0814310011058 | UPC: 814310011058
Each Clamp Is Made From Steel So They Will Last. The Spring Action Allows The Clamp To Hold Your Hose In Place Without The Worry Of Slippage All The While Making Removal Of The Hose A Breeze. Simply Squeeze The Handles To Open/Loosen The Clamp And Remove Your Hose..
The 4” Clamp Opens Up To Approximately 4-7/8” Id When Fully Opened (Handles Squeezed Together And Touching). This Allows For Plenty Of Room To Clamp And Secure Most Any Standard 4” Dust Collection Hose..
The Handles Are Coated With A Firm Rubber Material For Easy Gripping And Squeezing When Needed. The Handles Are Also Slightly Oversized For A Comfortable Grip. These Clamps May Be Used For Other Purposes But Are Primarily Designed For Dust Collection Hose..
Made Specifically For Dust Collection Purposes, The Ez-Release Clamps Are Simple In Design But Big On Functionality. Adding Or Removing, Or Moving Your Hose To Different Dust Ports Is A Whole Lot Easier With The Ez-Release Clamp..
Features
- No more busting your knuckles or grabbing a screwdriver only to have it slip out of the groove. Just squeeze and release the clamp to engage. It s that simple!Building a dust collection system can be a tough task at times with all of the different fittings, hoses and other parts a pieces. Standard wire hose clamps and knuckle busting steel clamps just add to the frustration. Introducing the EZ-Release Hose Clamp for Dust Collection Hoses.
- Made specifically for dust collection purposes, the EZ-Release Clamps are simple in design but big on functionality. Adding or removing, or moving your hose to different dust ports is a whole lot easier with the EZ-Release Clamp.
- Each clamp is made from steel so they will last. The spring action allows the clamp to hold your hose in place without the worry of slippage all the while making removal of the hose a breeze. Simply squeeze the handles to open/loosen the clamp and remove your hose.
- The handles are coated with a firm rubber material for easy gripping and squeezing when needed. The handles are also slightly oversized for a comfortable grip. These clamps may be used for other purposes but are primarily designed for dust collection hose.
- The 4 clamp opens up to approximately 4-7/8 ID when fully opened (handles squeezed together and touching). This allows for plenty of room to clamp and secure most any standard 4 dust collection hose.
- See more on Amazon...
Brand: Peachtree Woodworking | Manufacturer: PEACHTREE WOODWORKING
See On Amazon #6
The 4-Way Pressure Release Clamp For Clamping Panels Wood Panel Corner Clamping System Woodworking Bracket Set
Asin: B091KR7CR8 | Ean: 0788489271509 | UPC: 788489271509
4-Way: Stock Stays Flat And Prevents Buckling Of Boards During Glue-Up Because Of The Equally Applied Pressure From All Four Directions (Top, Bottom, And Both Sides); Ideal For Gluing Table Tops, Shelving, Veneer, Laminates; Durable Clamp Only Limited By The Quality Of Prep And Glue Used..
Contents: Package Includes (2) 12.75-Inch Long Notch Bars, (2) 6.9-Inch Long Notch Bars, (1) Clamp Assembly Head, (1) Clamp Assembly Tail, (16) Assembly Screws (4X 3/8-Inch, 12X 1-1/4-Inch L), And Assembly Instructions; 1 Set With 1 Clamp (Multiples Needed For Projects Over Approximately 2 Feet/61Cm)..
Adjusts To Your Project: Build Any Length Clamp With The Durable Plastic Bars With 12 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths; Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches; Turn The Handle To Tighten The Clamp And Unwind The Turn Handle To Release Pressure; Clamp Has Pressure Pads To Prevent Damage To The Edge Of Your Stock..
Easy To Use: Assembly Instructions Included; More Convenient Than Lining Up Standard Clamps And Cauls; Attach Notched Bars To Any Length 1.5-Inch X 1.75-Inch (3.2Cm X 4.4Cm) Board (Equivalent To A 2X4 Ripped In Half) With Provided Screws, Set Clamp And Turn Handle To Tighten (On Large Pieces, We Recommend One Clamp Every 18 Inches/45.7Cm For Maximum Clamping Efficiency); Make Sure The 2X4s You Use Are Not Twisted; Drill Pilot Holes For The Outer-Most Screws When Attaching The Pressure Pads..
Features
- PANEL GLUE-UPS: The 4-Way Pressure Release Clamp Wood Panel Corner Clamping System Woodworking Bracket Set handles stock up to 6 inches (15.2cm) thick for simplifying the process of gluing table tops, countertops, furniture panels, cabinet doors, and more and saves you from using additional clamps to keep the glue-ups straight.
- EASY TO USE: Assembly instructions included; More convenient than lining up standard clamps and cauls; Attach notched bars to any length 1.5-inch x 1.75-inch (3.2cm x 4.4cm) board (equivalent to a 2x4 ripped in half) with provided screws, set clamp and turn handle to tighten (on large pieces, we recommend one clamp every 18 inches/45.7cm for maximum clamping efficiency); Make sure the 2x4s you use are not twisted; Drill pilot holes for the outer-most screws when attaching the pressure pads.
- 4-WAY: Stock stays flat and prevents buckling of boards during glue-up because of the equally applied pressure from all four directions (top, bottom, and both sides); Ideal for gluing table tops, shelving, veneer, laminates; Durable clamp only limited by the quality of prep and glue used.
- ADJUSTS TO YOUR PROJECT: Build any length clamp with the durable plastic bars with 12 notches for maximum adjustability to handle a variety of stock widths; Clamp can be used for boards up to 6 inches in thickness by simply adjusting the clamp width capacity with the appropriate number of notches; Turn the handle to tighten the clamp and unwind the turn handle to release pressure; Clamp has pressure pads to prevent damage to the edge of your stock.
- CONTENTS: Package includes (2) 12.75-inch long notch bars, (2) 6.9-inch long notch bars, (1) clamp assembly head, (1) clamp assembly tail, (16) assembly screws (4x 3/8-inch, 12x 1-1/4-inch L), and assembly instructions; 1 set with 1 clamp (multiples needed for projects over approximately 2 feet/61cm).
- See more on Amazon...
Brand: NAGU | Manufacturer: NTLToolworks
Dimensions: 4.72 x 13.39 x 6.30 inches | Weight: 1.90 Kilograms
See On Amazon #7
4-Way Pressure Release Clamp Wood Panel Corner Clamping System Woodworking Bracket Set
Asin: B0B24YQK9W | Model: 90009 | PartNumber: 90009 | Ean: 0788489274982 | UPC: 788489274982
Easy To Use: Assembly Instructions Included; More Convenient Than Lining Up Standard Clamps And Cauls; Attach Notched Bars To Any Length 1.5-Inch X 1.75-Inch (3.2Cm X 4.4Cm) Board (Equivalent To A 2X4 Ripped In Half) With Provided Screws, Set Clamp And Turn Handle To Tighten (On Large Pieces, We Recommend One Clamp Every 18 Inches/45.7Cm For Maximum Clamping Efficiency); Make Sure The 2X4s You Use Are Not Twisted; Drill Pilot Holes For The Outer-Most Screws When Attaching The Pressure Pads.
Contents: Large Notch Bars*2, Small Notch Bars*2, Pressure Pad*2, Clamp Assembly Head*1, Clamp Assembly Tail*1, Assembly Screw*16, Instruction Manual*1.
Adjusts To Your Project: Build Any Length Clamp With The Durable Plastic Bars With 12 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths; Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches; Turn The Handle To Tighten The Clamp And Unwind The Turn Handle To Release Pressure; Clamp Has Pressure Pads To Prevent Damage To The Edge Of Your Stock.
4-Way: Stock Stays Flat And Prevents Buckling Of Boards During Glue-Up Because Of The Equally Applied Pressure From All Four Directions (Top, Bottom, And Both Sides); Ideal For Gluing Table Tops, Shelving, Veneer, Laminates; Durable Clamp Only Limited By The Quality Of Prep And Glue Used.
Features
- LARGE PANEL GLUE-UPS: The 4-Way Pressure Release Clamp Wood Panel Corner Clamping System Woodworking Bracket Set handles stock up to 6 inches (15.2cm) thick for simplifying the process of gluing table tops, countertops, furniture panels, cabinet doors, and more and saves you from using additional clamps to keep the glue-ups straight
- 4-WAY: Stock stays flat and prevents buckling of boards during glue-up because of the equally applied pressure from all four directions (top, bottom, and both sides); Ideal for gluing table tops, shelving, veneer, laminates; Durable clamp only limited by the quality of prep and glue used
- EASY TO USE: Assembly instructions included; More convenient than lining up standard clamps and cauls; Attach notched bars to any length 1.5-inch x 1.75-inch (3.2cm x 4.4cm) board (equivalent to a 2x4 ripped in half) with provided screws, set clamp and turn handle to tighten (on large pieces, we recommend one clamp every 18 inches/45.7cm for maximum clamping efficiency); Make sure the 2x4s you use are not twisted; Drill pilot holes for the outer-most screws when attaching the pressure pads
- ADJUSTS TO YOUR PROJECT: Build any length clamp with the durable plastic bars with 12 notches for maximum adjustability to handle a variety of stock widths; Clamp can be used for boards up to 6 inches in thickness by simply adjusting the clamp width capacity with the appropriate number of notches; Turn the handle to tighten the clamp and unwind the turn handle to release pressure; Clamp has pressure pads to prevent damage to the edge of your stock
- CONTENTS: large notch bars*2, small notch bars*2, pressure pad*2, clamp assembly head*1, clamp assembly tail*1, assembly screw*16, instruction manual*1
- See more on Amazon...
Brand: NAGU | Manufacturer: NAGU
See On Amazon #8
Taytools 114943 5-Piece 4 Easy Release Spring Clamps Double Loop Dust Collector Hose Clamps
Asin: B074YCNHFD | Model: 114943 | PartNumber: 114943 | Ean: 0791617734210 | UPC: 791617734210
Double-Loop Design Has Tighter Grip On Hose.
Fits Standard 4” Dust Collection Hose.
Includes Five (5) Easy Release Hose Clamps.
Spring Steel Maintains Pressure To Hold Hose Securely In Place.
Features
- Squeeze both rubber grip ends to expand and release double wire hose clamp
- Spring steel maintains pressure to hold hose securely in place
- Double-Loop design has tighter grip on hose
- Includes five (5) Easy Release hose clamps
- Fits standard 4 dust collection hose
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 2.00 x 9.00 x 8.00 inches | Weight: 1.25 pounds
See On Amazon #9
4" Quick Release Stainless Steel V-Band Clamp with Heavy Duty Bolt
Asin: B08CDC18LQ
Brand: Ticon | Manufacturer: Ticon Industries
See On Amazon #10
4-Way Equal Pressure Clamp
Asin: B001DT4QFM | Ean: 0400000209814 | UPC: 400000209814
Manufacturer: Rockler
Dimensions: 6.40 x 7.20 x 7.20 inches | Weight: 3.11 pounds
See On Amazon #11
Bolted High Pressure Clamps 4" SS304 for Tri Clamp/Tri Clover Fittings
Asin: B071D6RM96 | Ean: 0709951737071 | UPC: 709951737071
Brand: Emerald Gold | Manufacturer: Emerald Gold
See On Amazon #12
Vne T304 Stainless Steel High Pressure Clamp, For Tube Size: 4" - 13MHP4.0
Asin: B08MQPMZM8 | Ean: 7423716376369
For Tube Size:-4".
Connection:-Bolted.
Max. Pressure:-1000 Psi@70 Degrees F.
Body Material:-T304 Stainless Steel.
Features
- Item:-High Pressure Clamp
- Body Material:-T304 Stainless Steel
- For Tube Size:-4
- Max. Pressure:-1000 psi@70 Degrees F
- Connection:-Bolted
- See more on Amazon...
Brand: NVE | Manufacturer: Vne
See On Amazon
Looking For Something Else?
Search