Peachtree Woodworking Supply Clear Plastic Dust Collector Replacement Bag 5 Pack 20" Diameter by 43" Long For Machines with 20" Filter Drums 5 mil Thick
Asin: B07DX8678P | Model: 11501 | PartNumber: 11501 | Ean: 0817918021313 | UPC: 817918021313
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Not Only That, Thinner Bags Tend To “Dry Out” A Lot Quicker Than Thicker Bags. Our Plastic Dust Collector Bags Are A Thicker Plastic Material That Hold Up And Won’T Tear Like Thinner, Standard Household Bags. Designed To Be Used On The Bottom Of Single Stage Dust Collector Units, These Plastic Dust Collection Bags Are Ideal For Capturing Larger Dust Particles And Debris That Is Created When Working With Dust Collectors..
Each Of These Plastic Bags Measures Approximately 43” Long By 31" Wide (20" In Diameter). Please Check The Diameter Of Your Dust Collector Drum Before Deciding If These Bags Will Work For You. The 5 Mil Thick Bags Are Designed For Use With Dust Collectors That Are Use For Collecting Wood Dust And Debris..
Another Key Reason These Bags Work So Well For Dust Collection Is Because They Are Clear. This Means You Can See When The Bag Is Full Or Getting Close To Full. When You See The Transparent Bag Has Been Filled Up, Simply Remove It From The Dust Collector And Throw It Away. Replace The Bag With A New Plastic Dust Collection Bag And You’Re Ready To Go..
A Question We Get Asked A Lot Is, Why Not Just Use A Store Bought Trash Or Heavy Duty Bags For My Dust Collector? The Simple Answer Is That Standard Bags You Find At A Big Box Store Are Generally Very Thin And Flimsy In Comparison And Not Made For Dry Dust. This Makes Them Vulnerable To Tearing And Ripping Which Makes For A Complete Mess For Us To Clean Up..
Features
- Replace your factory cloth dust collection bags with these convenient and disposable heavy duty plastic bags. Typically when using dust collectors we want to keep the dust inside the bottom bags where it belongs. The problem is, with cloth bags, they tend to kick up a lot of dust and essentially create a dust storm when we need to remove them to clean them out. Plastic bags solve this issue.
- A question we get asked a lot is, why not just use a store bought trash or heavy duty bags for my dust collector? The simple answer is that standard bags you find at a big box store are generally very thin and flimsy in comparison and not made for dry dust. This makes them vulnerable to tearing and ripping which makes for a complete mess for us to clean up.
- Not only that, thinner bags tend to dry out a lot quicker than thicker bags. Our plastic dust collector bags are a thicker plastic material that hold up and won t tear like thinner, standard household bags. Designed to be used on the bottom of single stage dust collector units, these plastic dust collection bags are ideal for capturing larger dust particles and debris that is created when working with dust collectors.
- Another key reason these bags work so well for dust collection is because they are clear. This means you can see when the bag is full or getting close to full. When you see the transparent bag has been filled up, simply remove it from the dust collector and throw it away. Replace the bag with a new plastic dust collection bag and you re ready to go.
- Each of these plastic bags measures approximately 43 long by 31 wide (20 in diameter). Please check the diameter of your dust collector drum before deciding if these bags will work for you. The 5 mil thick bags are designed for use with dust collectors that are use for collecting wood dust and debris.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Dimensions: 1.73 x 15.71 x 13.23 inches | Weight: 2.29 pounds
See On Amazon Similar To Peachtree Woodworking Supply Clear Plastic
#1
Fulton Woodworking Tools 4" x 20' Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!
Asin: B0013ENKIQ | Model: 376 | PartNumber: 376 | Ean: 0810948014058 | UPC: 810948014058
This Heavy Duty Hose Will Not Collapse Under Pressure From Your Dust Collector..
Hose Is Clear So You Can See Directly Inside To Spot Any Kind Of Obstruction..
Tight Bending Radius Allows You To Maneuver The Hose Anywhere In Your Shop..
Features
- The PVC hose is wrapped around a steel wire that can easily be grounded.
- Tight bending radius allows you to maneuver the hose anywhere in your shop.
- This heavy duty hose will not collapse under pressure from your dust collector.
- Hose is clear so you can see directly inside to spot any kind of obstruction.
- See more on Amazon...
Brand: Fulton Woodworking Tools | Manufacturer: Peachtree Woodworking Supply Inc
Dimensions: 5.00 x 18.00 x 18.00 inches
See On Amazon #2
2 1/2" x 20' Clear PVC Dust Collection Hose For Use with Dust Collectors with 2-1/2" Ports. Ideal for Shop Vacuums
Asin: B01L0FZOQ8 | Model: 368 | PartNumber: 368 | Ean: 0810948014027 | UPC: 810948014027
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
While Pvc Hose Can Be Used On Other Machinery Or Devices It Has Been Designed For Dust Collection Purposes. The Hose Temperature Range Is -20° F To 165° F Which Is Ideal For Indoor Use Like In A Woodworking Or Workshop Environment. The Clear Hose Wraps Around A Black Carbon Steel Wire Helix That Reinforces The Hose To Keep It From Kinking And Is Capable Of An Electrostatic Discharge When Properly Grounded At Both Ends Of The Hose..
This Pvc Hose Is Clear Which Allows You To See What’S Going On Inside The Hose While The Dust And Debris Are Flowing Through It. Not Only Can You See The Dust And Debris, You Can Also See If Any Build Up Or Blockage Has Occurred. Being Able To See This Makes Fixing Any Suction Issues With The Hose Much Easier Than Typical Opaque Hoses..
Typically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
- See more on Amazon...
Brand: Fulton | Manufacturer: Peachtree Woodworking Supply Inc
Dimensions: 6.00 x 14.00 x 14.00 Inches | Weight: 5.00 Pounds
See On Amazon #3
Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop
Asin: B087XWCV61 | Model: 11567 | PartNumber: 11567 | Ean: 0817918022532 | UPC: 817918022532
The Head Is Mounted To A Solid Steel Miter Bar That Measure 18” In Length And Is .354” Thick By .730” Wide. Standard Miter Slots Are 3/4” X 3/8” With A 1/8” “T” Slot (Slight Variances From Brand To Brand) Running The Length On The Bottom Of The Slot. The Steel Miter Bar Is Equipped With A Metal, Removable Retaining Disc That Measures 7/8” In Diameter And Is Just Shy Of 1/8” To Fit Into To The “T” Slot To Prevent Accidental Lifting When Feeding Your Stock Through..
Both Ends Of The Fence Are Cut At Exactly 45 Degrees. This Allows You To Position The Fence Extra Close To The Saw Blade (With The Power Turned Off) So You Have Even More Control Over The Workpiece You Are Cutting. The Fence Comes With A Flip Stop That Makes Repetitive Cuts A Breeze. When Not In Use The Flip Stop Can Be Flipped Up And Out Of The Way. Also Include Are Two Sticky Back Measuring Tapes. 1 Tape Is Left To Right Reading And The Other Is Right To Left Reading..
Made From A Single Piece Of Extruded Aluminum, This Precision Miter Gauge Fence Is Not Only Durable, Its Accurate And Saves Setup Time. The Fence Is Designed To Be Used With Most Any Miter Gauge With Its Off-Set Mounting Track On The Back Of The Fence. The Off-Set Track Allows You To Flip The Fence For Lower Profile Miter Gauge Mounts And Flip Back For Standard Height Miter Gauges. The Fence Can Be Mounted To Older Miter Gauges By Adding A Wooden Block Mount With Wooden Screws If Necessary..
The .200” Thick, Adjustable, Solid Aluminum Head Is Machined With 13 Positive Stop Holes. 1 Hole Is At 90 Degrees While The 6 Holes On Both Sides Are At 22.5, 30, 45, 60, 67.5 And 90 Degrees. The Positive Stops Are Perfect For Many Woodworking Projects As They Are The Angles That Are Typically Used.To Adjust The Head You Simply Loosen The Post Knob Handle, Pull The Spring Loaded Indexing Pin Outward, Rotate The Head To The Desired Position, Release The Pin And Lock Into Place..
Features
- The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
- The .200 thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
- The head is mounted to a solid steel miter bar that measure 18 in length and is .354 thick by .730 wide. Standard miter slots are 3/4 x 3/8 with a 1/8 T slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8 in diameter and is just shy of 1/8 to fit into to the T slot to prevent accidental lifting when feeding your stock through.
- Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
- Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools Inc.
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 2.50 Pounds
See On Amazon #4
2-1/2 inch Diameter by 10 foot Long PVC Dust/Debris Collection Hose MADE IN THE USA with 2 each 2.5 inch Turnkey Stainless Steel Hose Clamps
Asin: B09BNVHJ21 | Model: 6173 | PartNumber: 6173 | Ean: 0817918023119 | UPC: 817918023119
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
304 Stainless Steel Hose Clamp- The 2 ½” Diameter Large Hose Duct Clamp (Including The Housing, The Band And The Internal Screw Are Made From Premium 304 Stainless Steel. This Makes The Clamp Strong, Durable And Rust Resistant Which Makes It Ideal For Many Applications In The Shop Or Around The Home..
No More Tools! – Set Your Tools Aside When Installing Your Ductwork Or Hose With These Handy, Easy To Tighten Hose/Duct Clamps. Place The Clamp Where Its Needed Then Simply Turn The Key To Loosen Or Tighten Them..
Typically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- NO MORE TOOLS! Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them.
- 304 STAINLESS STEEL HOSE CLAMP- The 2 diameter large hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Dimensions: 0.10 x 120.00 x 2.50 inches
See On Amazon #5
Fulton 2 1/2 Inch Thumb Screw Key Adjustable 304 Stainless Steel Hose Clamps, Pipe Clamp, Worm Gear Clamps, Dryer Vent Clamp, Dust Collection, Automotive, RV Clamp 5 pack (2 1/2" Hose Clamps)
Asin: B07PFPWGHD | Ean: 0817918022075 | UPC: 817918022075
Large Easy To Turn Key - The Easy To Turn And Easy To See Blue Key Is Made From A Strong And Durable Polymer. The Key Is Designed To Make The Securing And Un-Securing Of Hose Much Easier On The Knuckles. No More Knuckle Busting Flat Head Screw Drivers Or Tiny Socket Wrenches. Simply To Turn The Key Clockwise To Tighten, Counter Clockwise To Loosen..
Flexible Adjustable Size Range- 2 1/2 Inch Hose Clamps Are Flexible And Workable With A Rather Wide Adjustable Size Range From Appx. 2-7/8” (2.877” Or 73.08Mm) In Full Diameter Down To Appx. 1-7/8” (1.874” Or 47.61Mm) At Its Most Compact Diameter..
Flexible Adjustable Size Range- 2 1/2 Inch Hose Clamps Are Flexible And Workable With A Rather Wide Adjustable Size Range From Appx. 2-7/8” (2.877” Or 73.08Mm) In Full Diameter Down To Appx. 1-7/8” (1.874” Or 47.61Mm) At Its Most Compact Diameter..
304 Stainless Steel Hose Clamp- The 2 ½” Diameter Large Hose Duct Clamp (Including The Housing, The Band And The Internal Screw Are Made From Premium 304 Stainless Steel. This Makes The Clamp Strong, Durable And Rust Resistant Which Makes It Ideal For Many Applications In The Shop Or Around The Home..
Features
- NO MORE TOOLS! Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them.
- 304 STAINLESS STEEL HOSE CLAMP- The 2 diameter large hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home.
- LARGE EASY TO TURN KEY - The easy to turn and easy to see blue key is made from a strong and durable polymer. The key is designed to make the securing and un-securing of hose much easier on the knuckles. No more knuckle busting flat head screw drivers or tiny socket wrenches. Simply to turn the key clockwise to tighten, counter clockwise to loosen.
- FLEXIBLE ADJUSTABLE SIZE RANGE- 2 1/2 inch hose clamps are flexible and workable with a rather wide adjustable size range from appx. 2-7/8 (2.877 or 73.08mm) in full diameter down to appx. 1-7/8 (1.874 or 47.61mm) at its most compact diameter.
- FLEXIBLE ADJUSTABLE SIZE RANGE- 2 1/2 inch hose clamps are flexible and workable with a rather wide adjustable size range from appx. 2-7/8 (2.877 or 73.08mm) in full diameter down to appx. 1-7/8 (1.874 or 47.61mm) at its most compact diameter.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
See On Amazon #6
4 inch diameter x 10 foot long Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!
Asin: B01M3Y1WTT | Model: 6168 | PartNumber: 6168 | Ean: 0817918020460 | UPC: 817918020460
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
While Pvc Hose Can Be Used On Other Machinery Or Devices It Has Been Designed For Dust Collection Purposes. The Hose Temperature Range Is -20° F To 165° F Which Is Ideal For Indoor Use Like In A Woodworking Or Workshop Environment. The Clear Hose Wraps Around A Black Carbon Steel Wire Helix That Reinforces The Hose To Keep It From Kinking And Is Capable Of An Electrostatic Discharge When Properly Grounded At Both Ends Of The Hose..
This Pvc Hose Is Clear Which Allows You To See What’S Going On Inside The Hose While The Dust And Debris Are Flowing Through It. Not Only Can You See The Dust And Debris, You Can Also See If Any Build Up Or Blockage Has Occurred. Being Able To See This Makes Fixing Any Suction Issues With The Hose Much Easier Than Typical Opaque Hoses..
Typically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton
Dimensions: 4.00 x 120.00 x 4.00 inches
See On Amazon #7
Fulton DIY Table Saw Crosscut Sled Kit with 2 UHMW Miter Bars 2 Aluminum Tracks 1 Knob and 1 Bolt along with Full Color HOW TO BUILD YOUR OWN Crosscut Sled Guide Booklet
Asin: B08G4ZBCSR | Model: 11577 | PartNumber: 11577 | Ean: 0817918022815 | UPC: 817918022815
Uhmw Bars Are Most Commonly Used As Runners For Crosscut Sleds Since They Don’T Produce As Much Friction As Wood Does. Another Advantage Is That Uhmw Won’T Expand Or Contract Like Wood Does During Drastic Weather Changes. Each Bar Is Approximately 3/4” X 3/8” Which Fits Most Standard Table Saw Slots. Uhmw Bars Are Also Slick And Won’T Leave Any Residue, Dust Or Shavings Behind Like Wooden Bars Tend To Do..
We Have Also Included A Full Color And Detailed How To Guide Book To Help You With The Crosscut Sled Building Process. Each Kit Comes With 2 Each 19” Long By 3/4” By 3/8” Uhmw Bars, 2 Each 12” Long Mini Tracks, 1 Each Knob, 1 Each 1/4” By 20 Tpi Bolt And A How To Build Your Own Crosscut Sled Guide Book. Make Your Crosscut Sled To The Size You Want Or Need For Your Table Saw And Your Specific Cutting Needs. Please Note, The Bars Do Not Fit Ryobi Table Saw Track Slots..
The Tracks That Are Included In This Kit Are Made From Solid Extruded Aluminum And Are Made In The Usa. Each Track Is Cut To Length For The Perfect Sub-Fence On The Crosscut Sled. The Included Knob And Bolt Is For Making A Simple Stop Block Which When Finished, Can Slide The Length Of Either Track Along The Sub-Fence. The Stop Block Will Allow You To Make Repetitive Cuts Without Having To Constantly Move And Measure The Fence Distance Each Time You Make A Cut..
Some Time Ago We Noticed A Lot Of Companies Had Uhmw Bars Available For Purchase. While We As A Woodworking Company Know Exactly What They Are Used For, Many Novice Or Non-Woodworkers Do Not. That’S When We Decided To Create This Package With Pre-Cut Uhmw Bars, Pre-Cut Aluminum Track, A Knob And Bolt And An Easy To Understand How To Guide Booklet So You Can Create Your Very Own, Custom Crosscut Sled To Fit Your Table Saw!.
Features
- If you own a table saw, you probably have come across a situation or two where you need to make smaller cuts or make cross cuts. You may also have had the need to make repetitive cuts of the same length. Making small cuts, cross cuts and repetitive length cuts is where table saw crosscut sleds excel. Crosscut sleds help stabilize the work piece and are very accurate since they are essentially calibrated to your saw during the sled building process.
- Some time ago we noticed a lot of companies had UHMW bars available for purchase. While we as a woodworking company know exactly what they are used for, many novice or non-woodworkers do not. That s when we decided to create this package with pre-cut UHMW bars, pre-cut aluminum track, a knob and bolt and an easy to understand how to guide booklet so you can create your very own, custom crosscut sled to fit your table saw!
- UHMW bars are most commonly used as runners for crosscut sleds since they don t produce as much friction as wood does. Another advantage is that UHMW won t expand or contract like wood does during drastic weather changes. Each bar is approximately 3/4 x 3/8 which fits most standard table saw slots. UHMW bars are also slick and won t leave any residue, dust or shavings behind like wooden bars tend to do.
- The tracks that are included in this kit are made from solid extruded aluminum and are Made in the USA. Each track is cut to length for the perfect sub-fence on the crosscut sled. The included knob and bolt is for making a simple stop block which when finished, can slide the length of either track along the sub-fence. The stop block will allow you to make repetitive cuts without having to constantly move and measure the fence distance each time you make a cut.
- We have also included a full color and detailed how to guide book to help you with the crosscut sled building process. Each kit comes with 2 each 19 long by 3/4 by 3/8 UHMW bars, 2 each 12 long mini tracks, 1 each knob, 1 each 1/4 by 20 tpi bolt and a how to build your own crosscut sled guide book. Make your crosscut sled to the size you want or need for your table saw and your specific cutting needs. Please Note, the bars do NOT FIT RYOBI table saw track slots.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
Weight: 0.84 pounds
See On Amazon #8
Fulton Woodworking Tools 4" x 50' Ultra Flex Clear Vue Heavy Duty PVC Dust Collection Hose
Asin: B0013EI04A | Model: 377 | PartNumber: 377 | Ean: 0810948014065, 0798167706759 | UPC: 810948014065, 798167706759
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
While Pvc Hose Can Be Used On Other Machinery Or Devices It Has Been Designed For Dust Collection Purposes. The Hose Temperature Range Is -20° F To 165° F Which Is Ideal For Indoor Use Like In A Woodworking Or Workshop Environment. The Clear Hose Wraps Around A Black Carbon Steel Wire Helix That Reinforces The Hose To Keep It From Kinking And Is Capable Of An Electrostatic Discharge When Properly Grounded At Both Ends Of The Hose..
This Pvc Hose Is Clear Which Allows You To See What’S Going On Inside The Hose While The Dust And Debris Are Flowing Through It. Not Only Can You See The Dust And Debris, You Can Also See If Any Build Up Or Blockage Has Occurred. Being Able To See This Makes Fixing Any Suction Issues With The Hose Much Easier Than Typical Opaque Hoses..
Typically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
- See more on Amazon...
Brand: Fulton Woodworking Tools | Manufacturer: Peachtree Woodworking Supply Inc
Dimensions: 10.00 x 24.00 x 20.00 inches
See On Amazon #9
Micro-Mesh Pen Sanding Kit
Asin: B0037MEIT2 | Ean: 0725123001139 | UPC: 725123001139
The Results Are Truly Wonderful And Will Most Definitely Please The Most Discriminate Of Eyes. The Pack Includes 1 Each 2 Inch By 2 Inch Soft Touch Pads In The Following Grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 Plus A Color Coded Grit Guide..
Works Great On Stabilized Woods, Acrylics & Solid Surface Materials. Pads Are Colored Coded With Foam Backing For Easy Grit Identification. Colors May Vary From Images Shown Here. The Colors On The Grit Chart And The Colors Of Micro-Mesh Abrasives May Vary Slightly Due To Color Shifts In The Manufacturing Process. 9 Micro-Mesh Pads Included..
Ideal For Use With Plastics, Resin Or Impregnated Blanks When Turning. The Pads Can Also Be Used Around The Home For Fine Repair Work..
This Pack Works Extremely Well When Working With Ca Finishes Leaving Your Work Looking Like It Was Done By A Professional! When Using The Pads It Is Recommended That Start At The Lower Grit Of 1500 And Step Or Cycle Your Way Up To The High Grit Of 12000..
Features
- Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable with the Micro-Mesh Soft Touch sanding pads! Starting with the lowest grit of 1500 all the way up to 12000 grit this abrasive pad pack is sure the leave your project just the way you want it.
- This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional! When using the pads it is recommended that start at the lower grit of 1500 and step or cycle your way up to the high grit of 12000.
- The results are truly wonderful and will most definitely please the most discriminate of eyes. The pack includes 1 each 2 inch by 2 inch soft touch pads in the following grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 plus a color coded grit guide.
- Ideal for use with plastics, resin or impregnated blanks when turning. The pads can also be used around the home for fine repair work.
- Works great on stabilized woods, acrylics & solid surface materials. Pads are colored coded with foam backing for easy grit identification. Colors may vary from images shown here. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process. 9 Micro-Mesh Pads included.
- See more on Amazon...
Brand: Micro-Mesh | Manufacturer: Micro-Surface Finishing Prod
Dimensions: 1.25 x 4.40 x 3.40 Inches | Weight: 0.02 Pounds
See On Amazon #10
Micro-Mesh 9 Sanding Sheet Introductory Woodworkers Kit with a 2 inch by 3 inch Foam Sanding Block
Asin: B000H6HIK2 | Model: 3KWPACK | PartNumber: 3KWPACK | Ean: 7241871045629, 0787721288473, 5915903721264, 0810948010463 | UPC: 810948010463, 787721288473
Micromesh Performs Very Well In Conjunction With Polyurethane, Polyester, Epoxy, Lacquer And So On. Follow The Manufacturer’S Recommended Cure Times Prior To Re-Coating Or Applying The Finish Coat. When You Are Applying Multiple Coats, Sand From 1500 Micro-Mesh To 3200 Or 3600 Between Coats To Remove Any Orange-Peel Or Dirt. After The Final Coat Has Fully Cured, Polish The Surface Beginning With 2400 Micro-Mesh And Continue Through The Series (3200-12000) Until The Desired Gloss Is Achieved..
🇺🇸 This Made In The Usa Kit Includes: 1 Each Of The Following Grit 3 Inch By 4 Inch Sheets: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 And 12000. Also Included Is A 2 Inch By 3 Inch Foam Sanding Block. Micro-Mesh Can Be Used Wet Or Dry..
Satin Finishes Are Achieved By Sanding Up To The 3600 Grade. The Satin Finish Gets Progressively Higher In Gloss Through The 6000 Step. High Gloss Finishes Will Appear By The 6000 Through 12000 Step. The Wood, The Finish Used And Personal Preference Determine Where To Stop. Micro-Gloss Liquid Abrasive Can Be Hand Rubbed Onto The Finish Following The 12000 Micro-Mesh Step For An “Ultra” High Gloss Finish..
Before Starting The Micro-Mesh Cycle Of Abrasive Sanding, Coarse Sanding Should Be Done Using Up To 320 Grit Sandpaper. Shaping, Sawing Or Turning Of The Work Piece Should Be Complete.Begin With 1500 Micro-Mesh. Sand Until All Of The Sandpaper Scratches Are Removed. Continue With The Micro-Mesh Series And Cycle Up To The Desired Look (1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000). Thinned Lemon Oil Or Danish Oil Can Be Applied As A Finish On Bare Wood..
Features
- Micro-Mesh is a unique cushioned abrasive that produces a very fine and uniform scratch pattern. The nine grades of abrasives range from 1500 grit to 12000 grit. The 1500 is similar in grit range to conventional 400 grit wet/dry sandpaper. The 12000 will leave a scratch pattern that cannot be detected by the human eye and produces a wonderful looking finish. Micro-Mesh abrasives can polish to a high reflective state or leave a matte or satin finish depending upon where you stop.
- Before starting the Micro-Mesh cycle of abrasive sanding, coarse sanding should be done using up to 320 grit sandpaper. Shaping, sawing or turning of the work piece should be complete.Begin with 1500 Micro-Mesh. Sand until all of the sandpaper scratches are removed. Continue with the MICRO-MESH series and cycle up to the desired look (1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000). Thinned lemon oil or Danish oil can be applied as a finish on bare wood.
- MicroMesh performs very well in conjunction with polyurethane, polyester, epoxy, lacquer and so on. Follow the manufacturer s recommended cure times prior to re-coating or applying the finish coat. When you are applying multiple coats, sand from 1500 Micro-Mesh to 3200 or 3600 between coats to remove any orange-peel or dirt. After the final coat has fully cured, polish the surface beginning with 2400 Micro-Mesh and continue through the series (3200-12000) until the desired gloss is achieved.
- Satin finishes are achieved by sanding up to the 3600 grade. The satin finish gets progressively higher in gloss through the 6000 step. High gloss finishes will appear by the 6000 through 12000 step. The wood, the finish used and personal preference determine where to stop. Micro-Gloss liquid abrasive can be hand rubbed onto the finish following the 12000 Micro-Mesh step for an ultra high gloss finish.
- This Made In the USA KIT INCLUDES: 1 each of the following grit 3 inch by 4 inch sheets: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 and 12000. Also included is a 2 inch by 3 inch foam sanding block. Micro-Mesh can be used wet or dry.
- See more on Amazon...
Brand: Micro Mesh | Manufacturer: Micro-Surface Finishing
Dimensions: 2.00 x 6.00 x 2.60 inches | Weight: 0.08 Pounds
See On Amazon #11
Peachtree Woodworking Supply 2 Pack of 4 Way Pressure Clamps For Clamping Panels - Using Pressure From All Four Directions. For Woodworkers, Cabinet and Furniture Makers (2 four way pressure clamps)
Asin: B073QSF8JR | Model: 666 | PartNumber: 666
Build Any Length Clamp With The Durable Plastic Bars With 4 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths. Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches. Turn The Handle Clockwise To Tighten The Clamp And Turn The Handle Counter Clockwise To Release Pressure. The 4 Way Pressure Clamp Is Equipped With Side Pressure Pads To Prevent Damaging Your Stock..
This Clamp Package Comes With Two Full 4 Way Pressure Clamp Assemblies. Includes: 2 Each Rotating Handle Assemblies, 2 Each Tailstock Assemblies, 4 Each Side Pressure Pads And 12 Each 4 Notch Bars. Together, This Setup Will Allow You To Create Two 4 Way Pressure Clamps. More Than One Clamp Is Generally Recommended For Any Project Over 12” In Length. Wood Is Required For Setting Up The Clamp. Wood Is Not Included..
Now You Can Confidently Glue Up Wide Boards, Shelving, Table Tops, And More Up To 6” Thick. To Setup The Clamps Simply Attach The Clamp To Any Length 2 X 2’S (2” X 4” Ripped In Half) With The The Wood Screws That Are Provided, Apply Wood Glue To Your Project, Set The Clamps On To Your Panel Boards And Turn Handle To Tighten The Clamp On All Four Sides. We Recommend That You Place A 4 Way Pressure Clamp Every 12” To 18” For Best Results..
Let’S Make Racked Panel Glue Ups A Thing Of The Past! The Uniquely Designed 4 Way Pressure Solves This Age Old Issue By Applying Pressure To All Four Sides Of Your Panel Glue Up. With A Simple Turn Of The Rotating Clamp Handle, All Four Sides Of The Clamp Will Draw Inward At The Same Time. This Provides Equal Pressure On To Your Panel And Prevents Bowing, Buckling, Or Racked Panels..
Features
- Clamping panels can certainly be a challenge. Especially when we try to use everyday pipe clamps or bar clamps. While these types of clamps work fairly well on certain glue up projects, the one thing they don t do at all is apply pressure from the top and bottom of the panels during glue up. In fact, with all the pressure being applied on both sides, bar and pipe clamps will almost certainly bow, buckle or rack your panel glue up project.
- Let s make racked panel glue ups a thing of the past! The uniquely designed 4 way pressure solves this age old issue by applying pressure to all four sides of your panel glue up. With a simple turn of the rotating clamp handle, all four sides of the clamp will draw inward at the same time. This provides equal pressure on to your panel and prevents bowing, buckling, or racked panels.
- Build any length clamp with the durable plastic bars with 4 notches for maximum adjustability to handle a variety of stock widths. Clamp can be used for boards up to 6 inches in thickness by simply adjusting the clamp width capacity with the appropriate number of notches. Turn the handle clockwise to tighten the clamp and turn the handle counter clockwise to release pressure. The 4 way pressure clamp is equipped with side pressure pads to prevent damaging your stock.
- Now you can confidently glue up wide boards, shelving, table tops, and more up to 6 thick. To setup the clamps simply attach the clamp to any length 2 x 2 s (2 x 4 ripped in half) with the the wood screws that are provided, apply wood glue to your project, set the clamps on to your panel boards and turn handle to tighten the clamp on all four sides. We recommend that you place a 4 way pressure clamp every 12 to 18 for best results.
- This clamp package comes with two full 4 way pressure clamp assemblies. Includes: 2 each rotating handle assemblies, 2 each tailstock assemblies, 4 each side pressure pads and 12 each 4 notch bars. Together, this setup will allow you to create two 4 way pressure clamps. More than one clamp is generally recommended for any project over 12 in length. Wood is required for setting up the clamp. Wood is NOT included.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc..
Weight: 9.15 pounds
See On Amazon #12
Fulton 11 Piece 21 Profile Contour and Angle Sanding Grip Pack for Sanding Inside and Outside Angles Beads Corners Flutes Sign Lettering Ceramics Molding Plastic Auto Body Marine Wood & Around Home
Asin: B07S2T2Z4W | Model: 11529 | PartNumber: 11529 | Ean: 0817918022211 | UPC: 817918022211
The Contour Sanding Grip Pads Are Double-Ended To Make It Super Easy To Sand Convex Or Concave Surfaces. Each Pad Has A Convex Profile At One And A Concave Profile At The Other Along With A Narrow Flexible Section In The Middle That Can Be Used For Sanding.
This 11Pc Set Comes With The Following: 2.6Mm Thick Flexible Pad, 1/8” And ¼” Radius Round Over Grip, 90 Degree Grip, 60 And 75 Degree Grip, 30 And 45 Degree Grip And 1 Each Contour Grips With The Following Inside/Outside Diameters: 1/4'', 3/8'', 1/2'', 5/8'', 3/4'' And 7/8''..
Our Angled Contour Grip Sanding Pads Change The Angle Sanding Game By Providing You The Ability To Sand Inside Angles Without Flattening Or Smoothing The Crispness Of Your Original Profile. Not Only Does This Set Contain Inside Angle Profile Pads, There Are 1/8” And ¼” Round Overs, Various Non Specific Round Over Profile And Of Course The Flat Sanding Grip To Sand General Shapes And Objects..
These 11 Grips With 21 Different Profiles Will Tackle Most Any Sanding Project You May Come Across. Designed To Work With Standard 9” X 11” Sanding Sheets Or Pre-Cut Sandpaper Sheets (Included). This Set Is A Set Of Sanding Pads That No One Should Be Without..
Features
- Finally! A set of contours, angles and pads that work for inside, outside, flat, curved, small and tight areas all in one convenient package! The non-slip rubber pad prevents abrasive slippage and hand fatigue. This set is perfect for woodworkers, auto body, metal work, arts, crafts or even around the house.
- These 11 grips with 21 different profiles will tackle most any sanding project you may come across. Designed to work with standard 9 x 11 sanding sheets or pre-cut sandpaper sheets (included). This set is a set of sanding pads that no one should be without.
- The Contour Sanding Grip pads are double-ended to make it super easy to sand convex or concave surfaces. Each pad has a convex profile at one and a concave profile at the other along with a narrow flexible section in the middle that can be used for sanding
- Our Angled Contour Grip sanding pads change the angle sanding game by providing you the ability to sand inside angles without flattening or smoothing the crispness of your original profile. Not only does this set contain inside angle profile pads, there are 1/8 and round overs, various non specific round over profile and of course the flat sanding grip to sand general shapes and objects.
- This 11pc set comes with the following: 2.6mm thick flexible pad, 1/8 and radius round over grip, 90 degree grip, 60 and 75 degree grip, 30 and 45 degree grip and 1 each contour grips with the following inside/outside diameters: 1/4'', 3/8'', 1/2'', 5/8'', 3/4'' and 7/8''.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
See On Amazon #13
4" x 10' (4 inch diameter by 10 feet long) Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!
Asin: B0013EOTRW | Model: 375 | PartNumber: 375 | Ean: 0810948014041, 0798167706773 | UPC: 810948014041, 798167706773
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
While Pvc Hose Can Be Used On Other Machinery Or Devices It Has Been Designed For Dust Collection Purposes. The Hose Temperature Range Is -20° F To 165° F Which Is Ideal For Indoor Use Like In A Woodworking Or Workshop Environment. The Clear Hose Wraps Around A Black Carbon Steel Wire Helix That Reinforces The Hose To Keep It From Kinking And Is Capable Of An Electrostatic Discharge When Properly Grounded At Both Ends Of The Hose..
This Pvc Hose Is Clear Which Allows You To See What’S Going On Inside The Hose While The Dust And Debris Are Flowing Through It. Not Only Can You See The Dust And Debris, You Can Also See If Any Build Up Or Blockage Has Occurred. Being Able To See This Makes Fixing Any Suction Issues With The Hose Much Easier Than Typical Opaque Hoses..
Ypically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- ypically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
- See more on Amazon...
Brand: Peachtree Woodworking | Manufacturer: Peachtree Woodworking Supply
Dimensions: 5.00 x 16.00 x 16.00 inches
See On Amazon #14
Peachtree Woodworking Supply ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots (All 3 Clamps 24, 36 and 50 inch)
Asin: B07L18YFVC | Model: SUVELAM | PartNumber: SUVELAM | Ean: 0810948017516 | UPC: 810948017516
Each Clamp Rail Is Manufactured With A Low Profile To Make Guiding Your Power Tool Along The Edge Much Easier. The Low Profile Has Also Been Designed With Guide Accessories In Mind. The Clamp Rails Accept Many Different Accessories (Sold Separately) Or Can Create Your Very Own Jigs And Fixtures To Use With The Progrip Straight Edge Guides. Each Progrip Straight Edge Guide Has The Exact Same Profile Regardless Of Length..
The Lock Lever On Each Clamp Can Be Secured Into One Of Three Positions, Each Position Provides Varying Amounts Of Pressure. Depending On Your Project Or Application, You May Need To Apply More Pressure By Securing The Lock Lever To The Appropriate Position. Once Secured, The Progrip Straight Edge Guide Clamp Is Designed To Have Zero Side To Side Play With Minimal Deflection To Provide You With The Ideal Straight Edge To Make Clean, Smooth Cuts Every Time!.
How Does It Work? Each Progrip Straight Edge Guide Clamp Has One Adjustable Jaw And One Fixed Jaw. The Fixed Jaw Typically Will Go Against The Edge Of The Board Closest To You. Once You Place The Clamp On Your Board With The Fixed Jaw Over The End, The Adjustable End Gets Drawn In Against The Opposite Side Of The Board. Once Set And Aligned, You Secure The Clamp By Simply Locking It Down With The 3 Position Lock Lever..
Cut Straight, True Lines With Circular Saws, Routers, Trim Routers, Jig Saws And Many Other Power Tools You Probably Own. These Clamps Are Ideal For Cutting Large Sheets Of Plywood In Half (With A 50” Straight Edge Guide). Each Clamp Is Identified By The Maximum Clamping Distance Between Jaws. Another Great Application For These Clamps Is Cutting Dado Slots For Bookshelves. The Alignment And Cutting Process For Dados Is So Much Easier Than Ever Before With The Progrip Straight Edge Guides..
Features
- No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
- Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50 straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
- Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
- How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
- The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: ProGrip
Weight: 10.54 Pounds
See On Amazon #15
Micro-Mesh Corian Countertop Repair Kit
Asin: B0033REUBC | Model: 3KCOUNTER | PartNumber: 3KCOUNTER
The More Comfortable You Are With The Product And How It Works, The More Successful Your Outcome Will Be..
Includes: 1 - 3" X 4" Micro-Mesh 300 Ao White/300Ao White Soft Touch Pad 1 - 3" X 4" Micro-Mesh 600 Ao Yellow/800 Ao Green Soft Touch Pad 1 - 3" X 4" Micro-Mesh 1500 Ao Peach/2400 Ao Lilac Soft Touch Pad 1 - 3" X 4" Micro-Mesh 4000 Ao Blue/12000 Ao Grey Soft Touch Pad Soft Touch Pads Are Made Of Two Micro-Mesh Sheets Laminated To 3/16" Foam Center. You Receive 4 Soft Touch Pads. 3 Pads Are Double Sided Containing 2 Different Grits. The White Or Light Yellow Pad Is 300 Grit Only. Made In The Usa!.
The Pads Are Long-Lasting, And Easily Conform To Convex Or Concave Surfaces. Use The Appropriate Pad To Remove The Damage And Then Work Through The Different Grades Of Micro-Mesh Until You Have Matched Your Finish. This Kit Will Handle Finishes Ranging From Matte To High Gloss.Repairs Scratchs Repairs Burns Brings Back High Gloss Finish.
This Kit Is Perfect For Removing Scratches And Stains From Your Solid Surface Sink. Practicing With This Kit In Your Sink Is A Good Idea Before Using It On Your Kitchen Countertop..
Features
- For spot repairs on your countertop or over-all surface renewal of your solid surface sink or kitchen counter top not meant for stone, engineered stone, Formica, laminates, wood or metal surfaces. Kit will remove scratches, stains and burns
- This kit is perfect for removing scratches and stains from your solid surface sink. Practicing with this kit in your sink is a good idea before using it on your kitchen countertop.
- The more comfortable you are with the product and how it works, the more successful your outcome will be.
- The pads are long-lasting, and easily conform to convex or concave surfaces. Use the appropriate pad to remove the damage and then work through the different grades of MICRO-MESH until you have matched your finish. This kit will handle finishes ranging from matte to high gloss.Repairs scratchs Repairs burns Brings back high gloss finish
- Includes: 1 - 3 x 4 MICRO-MESH 300 AO white/300AO white Soft Touch Pad 1 - 3 x 4 MICRO-MESH 600 AO yellow/800 AO green Soft Touch Pad 1 - 3 X 4 MICRO-MESH 1500 AO peach/2400 AO lilac Soft Touch Pad 1 - 3 x 4 MICRO-MESH 4000 AO blue/12000 AO grey Soft Touch Pad SOFT TOUCH PADS are made of two MICRO-MESH sheets laminated to 3/16 foam center. You receive 4 Soft Touch Pads. 3 pads are double sided containing 2 different grits. The White or Light Yellow pad is 300 grit only. MADE IN THE USA!
- See more on Amazon...
Brand: Micro-Mesh | Manufacturer: Micro-Surface
Dimensions: 3.00 x 8.00 x 3.00 inches | Weight: 0.25 pounds
See On Amazon #16
Fulton Scraper Burnisher with 6 Piece Multi-Shaped Scraper Set 3 Rectangle 1 Beveled 1 Curved (Convex and Concave) and 1 Gooseneck Scraper
Asin: B08GZHCGLZ | Model: 11573 | PartNumber: 11573 | Ean: 0817918022648 | UPC: 817918022648
The 6 Included Scrapers Are Made From A Strong Carbon Steel And Come In Various Shapes For A Wide Variety Of Applications. The Three Rectangle Scrapers Of Various Thicknesses In This Pack Will Work For The Vast Majority Of Your Projects. The Curved (Convex And Concave Curves), Gooseneck And Beveled Scrapers Are Ideal For Working Oddly Shaped Pieces Like Chairs, Spindles, Boxes And More..
Once Your Scrapers Have The Desired Burr On Each Edge, You’Ll Be Able To Produce Wonderful Looking Results On Your Wooden Surfaces. Scrapers Are Perfect Making Your Surfaces Extra Smooth And Ready For Light Sanding For The Finishing Process. We Highly Recommend Burnishing Each Scraper Out Of The Box For Optimum Performance. Also Included Is A Handy Booklet On “How To Sharpen A Card Scraper Using A Burnisher” To Get You Started Right Out Of The Box..
If You Have Never Used A Burnisher, It Is Relatively Simple To Use. The Idea Is To Roll The Edges Of Your Scraper To Create A Burr So That It Produces Fine, Light Shavings And Makes The Wood Surface Very Smooth. To Do This, You Simply Tilt The Burnisher Slightly To One Side Of The Scraper And Run The Burnisher Along The Edge Repeatedly Until You Produce The Burr You Are Looking For..
This Burnisher Is Simple In Design And Is Made Specifically To Create Burrs On The Edges Of Flat, Curved Or Beveled Card Scrapers. The Hardened, Polished High Carbon Hrc 62-64 Steel Rod Measures Approximately 3/8 Inch In Diameter Which Makes It Perfect For Working The Edges Of Your Scrapers Without Any Give. The Hardwood Handle Gives You A Comfortable Firm Grip And Helps Provide Leverage When Placing Pressure On The Scraper..
Features
- Scraper burnishers are a staple in most every woodworkers shop. They are used to create a burr or an edge on card scrapers so that the scrapers can produce clean, smooth wood surfaces by scraping the wood. Most woodworkers love to use scrapers simply because they produce a wonderful looking end result that are beyond compare to most any other device.
- This burnisher is simple in design and is made specifically to create burrs on the edges of flat, curved or beveled card scrapers. The hardened, polished high carbon HRC 62-64 steel rod measures approximately 3/8 inch in diameter which makes it perfect for working the edges of your scrapers without any give. The hardwood handle gives you a comfortable firm grip and helps provide leverage when placing pressure on the scraper.
- The 6 included scrapers are made from a strong carbon steel and come in various shapes for a wide variety of applications. The three rectangle scrapers of various thicknesses in this pack will work for the vast majority of your projects. The curved (convex and concave curves), gooseneck and beveled scrapers are ideal for working oddly shaped pieces like chairs, spindles, boxes and more.
- If you have never used a burnisher, it is relatively simple to use. The idea is to roll the edges of your scraper to create a burr so that it produces fine, light shavings and makes the wood surface very smooth. To do this, you simply tilt the burnisher slightly to one side of the scraper and run the burnisher along the edge repeatedly until you produce the burr you are looking for.
- Once your scrapers have the desired burr on each edge, you ll be able to produce wonderful looking results on your wooden surfaces. Scrapers are perfect making your surfaces extra smooth and ready for light sanding for the finishing process. We highly recommend burnishing each scraper out of the box for optimum performance. Also included is a handy booklet on How to Sharpen a Card Scraper Using A Burnisher to get you started right out of the box.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
See On Amazon #17
Peachtree Woodworking Supply 4 inch Diameter by 10 foot Long PVC Dust/Debris Collection Hose MADE IN THE USA with 2 each 4 inch Turnkey Stainless Steel Hose Clamps
Asin: B09BNSBZTQ | Model: 6174 | PartNumber: 6174 | Ean: 0817918023126 | UPC: 817918023126
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
304 Stainless Steel Hose Clamp- The 4” Diameter Large Hose Duct Clamp (Including The Housing, The Band And The Internal Screw Are Made From Premium 304 Stainless Steel. This Makes The Clamp Strong, Durable And Rust Resistant Which Makes It Ideal For Many Applications In The Shop Or Around The Home..
No More Tools! – Set Your Tools Aside When Installing Your Ductwork Or Hose With These Handy, Easy To Tighten Hose/Duct Clamps. Place The Clamp Where Its Needed Then Simply Turn The Key To Loosen Or Tighten Them..
Typically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- NO MORE TOOLS! Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them.
- 304 STAINLESS STEEL HOSE CLAMP- The 4 diameter large hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Dimensions: 0.10 x 120.00 x 4.00 Inches
See On Amazon #18
Peachtree Woodworking Supply Pro Grind Sharpening System for 6 Inch Grinders to Sharpen Lathe Turning Tools, Chisels, Skews, Bowl Spindle Gouges Includes Setup Blocks and Quad Jig for 6 inch Grinders
Asin: B0CMVN1JKZ | Model: 7575-PT6 | PartNumber: 7575-PT6 | Ean: 0817918024239 | UPC: 817918024239
The Pro Grind Tool Rest Bar Attachment Offers You The Best Possible Way To Achieve A Precise Edge To Your Bevels Without Taking Of Too Much Material Off Of Your Tool. After All, We Need Our Tools To Last A Long Time, So Why Would You Want To Take Off To Much At A Time? The Tool Rest Bar Is Ideal For Sharpening Curved, Even Bevel Edges That Are Typically Used On Spindle And Roughing Gouges..
The Pro Grind Sharpening System Also Comes With A Number Of Setup Jigs And Accessories To Help In The Setup Process To Sharpen Your Tools To The Proper And Repeatable Angles. From The Built-In Projection Gauge On The Multi-Grind Arm To The Magnetic Micro Bevel Setup Block You’Ll Be Able To Achieve Consistent Repeatable Angles And Produce Excellent Results Each And Every Time You Use The Pro Grind Sharpening Jig System..
The Large, 3” X 5” Slotted Platform Is The Ideal Way To Sharpen Flat Edged Tools Like Wood Turning Skews, Chisels And Hand Plane Irons. The Platform Has A Slot Milled Horizontally Through It So It Can Accept The Included Tool Holder. The Tool Holder Is Designed To Keep Your Tools At The Correct Angle While Being Able To Slide Side To Side During The Sharpening Process..
The Included And Versatile Multi-Grind Jig Will Correctly Shape The Edge On Bowl Gouges, Side Grinds (Aka Ellsworth Grind, Liam O’Neil Grind/Irish Grind) Or Fingernail Grinds For Spindle Work And Detailing. Not Only Will It Correctly Shape Your Tools, You Will Also Be Able To Repeat The Process To Produce Consistent Results Every Time. The Multi-Grind Jig Is Designed To Be Used With The Included Multi-Grind Arm On The Pro Grind Sharpening System And Will Accept Tools Up To 1.125” In Diameter..
Features
- Sharpen chisels, gouges, bowl gouges, spindle gouges, carving tools, wood turning scrapers, parting tools, block plane irons and more with the PRO GRIND Sharpening System! With 3 primary methods of sharpening, you ll be able to precisely hone each tool to your exacting specifications regardless of the tool you are sharpening. The PRO GRIND Sharpening System includes a vast collection of unique setup tools, jigs and accessories that most sharpening systems force you to purchase separately
- The included and versatile Multi-Grind Jig will correctly shape the edge on bowl gouges, side grinds (aka Ellsworth grind, Liam O Neil grind/Irish grind) or fingernail grinds for spindle work and detailing. Not only will it correctly shape your tools, you will also be able to repeat the process to produce consistent results every time. The Multi-Grind Jig is designed to be used with the included Multi-Grind arm on the PRO GRIND Sharpening System and will accept tools up to 1.125 in diameter.
- The PRO GRIND Tool Rest Bar attachment offers you the best possible way to achieve a precise edge to your bevels without taking of too much material off of your tool. After all, we need our tools to last a long time, so why would you want to take off to much at a time? The Tool Rest Bar is ideal for sharpening curved, even bevel edges that are typically used on spindle and roughing gouges.
- The large, 3 x 5 slotted platform is the ideal way to sharpen flat edged tools like wood turning skews, chisels and hand plane irons. The platform has a slot milled horizontally through it so it can accept the included tool holder. The tool holder is designed to keep your tools at the correct angle while being able to slide side to side during the sharpening process.
- The PRO GRIND Sharpening System also comes with a number of setup jigs and accessories to help in the setup process to sharpen your tools to the proper and repeatable angles. From the built-in projection gauge on the Multi-Grind arm to the Magnetic Micro Bevel setup block you ll be able to achieve consistent repeatable angles and produce excellent results each and every time you use the PRO GRIND Sharpening Jig system.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Savannah
Dimensions: 4.00 x 30.00 x 9.00 inches
See On Amazon #19
Fulton 2 1/2 Inch Thumb Screw Key Adjustable 304 Stainless Steel Hose Clamps, Pipe Clamp, Worm Gear Clamps, Dryer Vent Clamp, Dust Collection, Automotive, RV Clamp 10 pack (2 1/2" Hose Clamps)
Asin: B07PDSLWN6 | Ean: 0817918022082 | UPC: 817918022082
Often Used In These Applications – These Unique Clamps Are Typically Used In Securing Duct Work, Dryer Vents, Dust Collection Hoses, Piping, Large Cable, Pvc Tubing And More. Ideal For Use In Automotive, Industrial, Mechanical, Agriculture, Boat/Marine, Shield, Recreational Vehicles, Household And More. Works For Both Indoor Or Outdoor Use..
Flexible Adjustable Size Range- 2 1/2 Inch Hose Clamps Are Flexible And Workable With A Rather Wide Adjustable Size Range From Appx. 2-7/8” (2.877” Or 73.08Mm) In Full Diameter Down To Appx. 1-7/8” (1.874” Or 47.61Mm) At Its Most Compact Diameter..
304 Stainless Steel Hose Clamp- The 2 ½” Diameter Large Hose Duct Clamp (Including The Housing, The Band And The Internal Screw Are Made From Premium 304 Stainless Steel. This Makes The Clamp Strong, Durable And Rust Resistant Which Makes It Ideal For Many Applications In The Shop Or Around The Home..
Large Easy To Turn Key - The Easy To Turn And Easy To See Blue Key Is Made From A Strong And Durable Polymer. The Key Is Designed To Make The Securing And Un-Securing Of Hose Much Easier On The Knuckles. No More Knuckle Busting Flat Head Screw Drivers Or Tiny Socket Wrenches. Simply To Turn The Key Clockwise To Tighten, Counter Clockwise To Loosen..
Features
- NO MORE TOOLS! Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them.
- LARGE EASY TO TURN KEY - The easy to turn and easy to see blue key is made from a strong and durable polymer. The key is designed to make the securing and un-securing of hose much easier on the knuckles. No more knuckle busting flat head screw drivers or tiny socket wrenches. Simply to turn the key clockwise to tighten, counter clockwise to loosen.
- OFTEN USED IN THESE APPLICATIONS These unique clamps are typically used in securing duct work, dryer vents, dust collection hoses, piping, large cable, pvc tubing and more. Ideal for use in automotive, industrial, mechanical, agriculture, boat/marine, shield, recreational vehicles, household and more. Works for both indoor or outdoor use.
- 304 STAINLESS STEEL HOSE CLAMP- The 2 diameter large hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home.
- FLEXIBLE ADJUSTABLE SIZE RANGE- 2 1/2 inch hose clamps are flexible and workable with a rather wide adjustable size range from appx. 2-7/8 (2.877 or 73.08mm) in full diameter down to appx. 1-7/8 (1.874 or 47.61mm) at its most compact diameter.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
See On Amazon
Looking For Something Else?
Search