Raidenracing Harden Steel 47T Spur Main Gear for HPI 1/8 Savage 4.6 X 21 25 SS Replace 76937
Asin: B07F2X9QQM | Model: 0628U7QUELB | PartNumber: 0628U7QUELB | Ean: 8011447095230
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Replace 76937.
For Hpi 1/8 Savage 4.6 X 21 25 Ss.
Brand: Raidenracing | Manufacturer: Raidenracing
Weight: 0.09 pounds
See On Amazon Similar To Raidenracing Harden Steel 47T Spur
#1
Hardened Steel 54T SPUR Main Gear for TRAXXAS 1/10 Slash Stampede Rsutler 4x4 6804 6807 6808 6708 Replace#3956
Asin: B07GKJY5VZ | Model: 0609UEX4ME8 | PartNumber: 0609UEX4ME8 | Ean: 8011447095858
Replace #3956.
For 1/10 Slash Stampede 4X4 Rsutler 6804 6807 6808 6708.
Features
- Material: Hardened Steel
- For 1/10 SLASH STAMPEDE 4x4 Rsutler 6804 6807 6808 6708
- Replace #3956
- See more on Amazon...
Brand: Raidenracing | Manufacturer: Raidenracing
Weight: 0.04 pounds
See On Amazon #2
Upgrade Harden Steel 50T Main Spur Gear 1 Mod M1 for Traxxas X-MAXX XRT E-REVO 2.0 New MAXX XO-1-1 pc
Asin: B076CMVC42 | Model: B076CMVC42 | PartNumber: B076CMVC42 | Ean: 7849717313118
50 Tooth Hardened Steel Mod 1 (1.0 Metric Pitch) Spur Gear For The Traxxas E Revo2, X-Maxx 6S And 8S, Maxx 4S And Xo-1.
With The Pins Removed, Use The Four 4X16mm Button-Head Cap Screws On The Bottom To Set Gear Mesh. Loosen The Four 4X16mm Button-Head Cap Screws. Cut A Narrow Strip Of Notebook Paper And Run It Into The Gear Mesh. Slide The Motor And Pinion Gear Into The Spur Gear. Tighten The Four 4X16mm Button-Head Cap Screws, And Then Remove The Strip Of Paper. You Should Be Able To Run A Fresh Strip Of Paper Through The Gears Without Binding Them..
Do Not Use The Pin System For Setting The X-Maxx Gear Mesh. Instead, Manually Set The Gear Mesh Without The Pins. Refer To The Traxxas Manual For Instructions (Ref. Pg.22 - Adjusting Gear Mesh).
Color : Black.
Features
- Material: Harden Steel
- Color : Black
- 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1
- Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh)
- With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them.
- See more on Amazon...
Brand: Raidenracing | Manufacturer: Raidenracing
Weight: 0.09 pounds
See On Amazon #3
Traxxas 4686 Spur Gear 48P, 86T
Asin: B000HKH0TC | Model: TRA4686 | PartNumber: TRA4686 | Ean: 0783329552008, 0734548775921, 0020334468604 | UPC: 734548775921, 783329552008, 020334468604
One Gear Per Package.
86-Tooth, 48-Pitch.
For Models With Torque-Control Slipper Clutch.
Tough Nylon Construction For High-Power Applications.
Features
- Optional Traxxas spur gears allow you to increase or decrease the final drive ratio and tune for different applications
- Tough nylon construction for high-power applications
- One gear per package
- For models with Torque-Control slipper clutch
- 86-tooth, 48-pitch
- See more on Amazon...
Brand: Traxxas | Manufacturer: Traxxas
Dimensions: 4.88 x 3.25 x 0.75 inches | Weight: 0.00 pounds
Warranty: No Warranty
See On Amazon #4
Upgrade Harden Steel 46T Main Spur Gear 1 Mod M1 for Traxxas X-MAXX XRT NEW MAXX XO-1 EREVO 2.0-1 pc
Asin: B07GM8KDVS | Ean: 8011447096008
For Traxxas 1/5 X-Maxx , 1/7 Xo-1, New Erevo 2.0,1/10 New Maxx, 1/6 Xrt.
Color : Black.
Features
- Material: Harden Steel
- Color : Black
- For Traxxas 1/5 X-Maxx , 1/7 XO-1, NEW EREVO 2.0,1/10 NEW MAXX, 1/6 XRT
- See more on Amazon...
Brand: Raidenracing | Manufacturer: Raidenracing
Weight: 0.66 Pounds
See On Amazon #5
RC Car Hardened Steel Spur Gear 48P for Traxxas Slash 2WD/Drag Slash/Bandit Upgrade Parts (72T-76T /48P)
Asin: B0C7GL48TW
3. Cnc Finishing, Accurate Data And Easy To Install;.
5.Package Includes:72T Gear*1 76T Gear*1 Accessories Kit*2.
4.Suitable For Traxxas Bandit;2Wd Slash;Drag Slash;.
2. Black Oxide Coating To Prevent Rust;.
Features
- 1. Machined from hardened steel, instead of ordinary nylon gears, strong and wear-resistant;
- 2. Black oxide coating to prevent rust;
- 3. CNC finishing, accurate data and easy to install;
- 4.Suitable for Traxxas Bandit;2WD Slash;Drag Slash;
- 5.Package includes:72T Gear*1 76T Gear*1 Accessories Kit*2
- See more on Amazon...
Brand: DKKY DKKY Racing | Manufacturer: DKKY RACING
See On Amazon #6
Traxxas 6447R Spur Gear, 46-Tooth, Steel (Wide-Face, 1.0 Metric Pitch)
Asin: B081LN46VV | Ean: 0020334644787 | UPC: 020334644787
Brand: Traxxas | Manufacturer: Traxxas
Dimensions: 0.30 x 5.50 x 3.10 inches | Weight: 0.09 pounds
See On Amazon #7
Vanquish Products 52t Spur Gear VPSIRC00403 Electric Car/Truck Option Parts
Asin: B093DQSYV7 | Ean: 0791512780978 | UPC: 791512780978
Brand: Incision | Manufacturer: Incision
See On Amazon #8
ShareGoo Metal 48P Spur Pully Gear 92T Compatible with 3Racing Sakura D4 AWD/RWD 1/10 RC Drift Racing Car
Asin: B073X4BFX6 | Model: 92T | PartNumber: 92T | Ean: 0763846882123 | UPC: 763846882123
Suitable For Most 1:10 On-Road Belt Drive Car, Also Can Use On Some Shaft Drive Car..
Please Attention, Because Of The Motor Gear And This Spur Gear Are Metal, Suggest To Add Lubricating Oil, Not Only To Reduce The Friction Between The Metal Gear, But Also The Sound Will Be A Little Bit Small..
Top Quality Steel Materials & Superb Craftsmanship.
Outer Diameter: 50Mm ,Inner Diameter: 9.5Mm.
Features
- This is a metal 48P spur gear 92T, compatible with Sakura D4 AWD/RWD 1/10 rc car
- Outer diameter: 50mm ,Inner diameter: 9.5mm
- Suitable for most 1:10 on-road belt drive car, also can use on some shaft drive car.
- Top quality steel materials & superb craftsmanship
- Please attention, because of the motor gear and this spur gear are metal, suggest to add lubricating oil, not only to reduce the friction between the metal gear, but also the sound will be a little bit small.
- See more on Amazon...
Brand: Share Goo | Manufacturer: Share Goo
Dimensions: 0.20 x 2.80 x 2.10 inches | Weight: 0.02 pounds
See On Amazon #9
Harden Steel Spur Main Gear 50T 32P 0.8M for Traxxas Slash Stampede Rustler 4x4 6842
Asin: B08JPVGD1H | Model: SSLA050T-BK | PartNumber: SSLA050T-BK | Ean: 0747992974147, 8435315928855, 0747992978329 | UPC: 747992974147, 747992978329
Hard Steel More Durable And Cool.
What You See In The Main Picture Is What You Will Receive.
Will Fit Slash 4X4 Rustler 4X4 Stampede 4X4.
Features
- Original number 6842
- Will fit Slash 4X4 Rustler 4X4 Stampede 4x4
- Hard steel more durable and cool
- What you see in the main picture is what you will receive
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
Dimensions: 0.50 x 2.00 x 2.00 inches
See On Amazon #10
6448 Hot Racing 45#Steel 50T 1 Mod Hardened Steel Spur Gear for Traxxas 1/10 E-Revo 2.0 VXL 1/5 X-Maxx Maxx 1/7 XO-1 (46T)
Asin: B09RZPMQP8 | Model: 6448 gear | PartNumber: 6448 gear
Cnc Machined Hardened Steel Construction.
Laser Marked Teeth.
Black Oxide Finish.
Compact And Lightweight Design.
Features
- Made of high quality steel.
- Compact and lightweight design
- CNC machined hardened steel construction
- Black oxide finish
- Laser marked teeth
- See more on Amazon...
Brand: XBERSTAR | Manufacturer: XBERSTAR
See On Amazon #11
Hobbypark Metal Steel 3956 Spur Gear 54T-Tooth 0.8 Metric Pitch Compatible with Traxxas Gear fit for 1/10 Traxxas Slash 4x4, Rustler 4x4 VXL, Stampede 4x4, Summit, E-Revo (2pcs)
Asin: B08VS8QR9V | Model: 8334-2 | PartNumber: 8334-2
✔Made Of Quality Metal, More Durable..
✔Great Value,Package Include: 2X Steel Spur Gear.
✔Spec: 0.8 Metric Pitch, Compatible With 32-Pitch Pinion Gear.
Features
- Compatible with 1/10 Traxxas Slash 4x4(2WD), Rustler 4x4 VXL (2WD), Stampede 4x4(2WD), Summit, E-Revo, Jato 3.3 RC Cars Trucks
- Spec: 0.8 metric pitch, compatible with 32-pitch pinion gear
- Made of Quality Metal, more durable.
- Great Value,Package include: 2x Steel Spur gear
- See more on Amazon...
Brand: Hobbypark | Manufacturer: HobbyPark
See On Amazon #12
Harden Steel 50T Main Spur Gear 1 Mod M1 for Traxxas 1/5 X-Maxx 1/10 E-Revo 2.0 MAXX 1/7 XO-1 1/6 XRT 6448
Asin: B073SSMC4D | Ean: 7849717668591
Will Fit 1/10 E-Revo 2.0 Maxx 1/7 Xo-1 1/5 Xmaxxx 6S 8S 1/6 Xrt.
What You See In The Main Picture Is What You Will Receive.
Material Harden Steel.
Do Not Use The Pin System For Setting The X-Maxx Gear Mesh. Instead, Manually Set The Gear Mesh Without The Pins.With The Pins Removed, Use The Four 4X16mm Button-Head Cap Screws On The Bottom To Set Gear Mesh. Loosen The Four 4X16mm Button-Head Cap Screws. Cut A Narrow Strip Of Notebook Paper And Run It Into The Gear Mesh. Slide The Motor And Pinion Gear Into The Spur Gear. Tighten The Four 4X16mm Button-Head Cap Screws, And Then Remove The Strip Of Paper. You Should Be Able To Run A Fresh Strip Of Paper Through The Gears Without Binding Them..
Features
- Original Number 6448 Please check the original nubmer to determin if it fit your car or not
- Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins.With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them.
- Will fit 1/10 E-Revo 2.0 MAXX 1/7 XO-1 1/5 XMAXXX 6S 8S 1/6 XRT
- Material Harden Steel
- What you see in the main picture is what you will receive
- See more on Amazon...
Brand: CrazyRacer | Manufacturer: CrazyRacer
See On Amazon #13
AMOGOT Metal Steel 48P 83T Spur Gear for RC 1/10 2WD Slash Stampede Rustler 2WD Bandit VXL XL-5 F-150 SVT Upgrade Parts 83T
Asin: B0CLL16NYC
【Easy To Install】Directly Replacement Install And Provided Screw And Spacer To Lock The Gear And Easily Upgraded Replaced #4690 #4683 #4686.
【Package Included】1 X 48P 83T Spur Gear.
【Spec】48-Pitch 83-Tooth Outer Diameter Size:45Mm/1.77Inch.
【Material】Made Of High Quality Black Medium Carbon Metal Steel Material To Increased Wear Resistance And Improve Fatigue Life,Make Them Roll Smoothly.
Features
- Compatible with Suit For 1/10 RC Slash 2WD Stampede 2WD Rustler 2WD Bandit 2WD Slash VXL Bandit XL-5 F-150 SVT Upgrade Parts
- Material Made of High Quality Black Medium Carbon Metal Steel material to increased wear resistance and improve fatigue life,make them roll smoothly
- Easy to install Directly replacement install and provided screw and spacer to lock the gear and easily upgraded replaced #4690 #4683 #4686
- Spec 48-Pitch 83-Tooth Outer diameter size:45mm/1.77inch
- Package Included 1 x 48P 83T spur gear
- See more on Amazon...
Brand: AMOGOT | Manufacturer: AMOGOT
See On Amazon #14
Harden Steel 46T Main Spur Gear 1 Mod M1-1 pc for Traxxas 1/5 X-Maxx 1/7 XO-1 1/10 E-Revo 2.0 MAXX 1/6 XRT 6447
Asin: B07GGZH9FT | Ean: 8002126032370
Hard Steel More Durable And Cool.
What You See In The Main Picture Is What You Will Receive..
Will Fit 1/5 X-Maxx 1/7 Xo-1 1/10 E-Revo 2.0 Maxx 1/6 Xrt.
Do Not Use The Pin System For Setting The X-Maxx Gear Mesh. Instead, Manually Set The Gear Mesh Without The Pins.With The Pins Removed, Use The Four 4X16mm Button-Head Cap Screws On The Bottom To Set Gear Mesh. Loosen The Four 4X16mm Button-Head Cap Screws. Cut A Narrow Strip Of Notebook Paper And Run It Into The Gear Mesh. Slide The Motor And Pinion Gear Into The Spur Gear. Tighten The Four 4X16mm Button-Head Cap Screws, And Then Remove The Strip Of Paper. You Should Be Able To Run A Fresh Strip Of Paper Through The Gears Without Binding Them..
Features
- Original Number 6447 Please check the original nubmer to determin if it fit your car or not.
- Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins.With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them.
- Hard steel more durable and cool
- Will Fit 1/5 X-Maxx 1/7 XO-1 1/10 E-Revo 2.0 MAXX 1/6 XRT
- What you see in the main picture is what you will receive.
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
Weight: 0.11 pounds
See On Amazon #15
2pcs Harden Steel 46T Main Spur Gear 1 Mod M1 for 1/5 Traxxas X-Maxx 1/7 Traxxas XO-1 1/10 Traxxas E-Revo 2.0 MAXX 1/6 Traxxas XRT 6447 Upgrade Parts Black
Asin: B0C3B88DDP
Harden Steel More Durable And Cool,Makes My Car Go 10 Mph Faster,Holding Up Well.
Package Include: 2Pcs Harden Steel 46T Main Spur Gear.
Will Fit 1/5 Traxxas X-Maxx 1/7 Traxxas Xo-1 1/10 Traxxas E-Revo 2.0 Maxx 1/6 Traxxas Xrt Super Gear 46T Upgrade Parts.
Please Check The Original Nubmer To Determin If It Fit Your Car Or Not..
Features
- Replacement Of Original Number:6447
- Please Check The Original Nubmer To Determin If It Fit Your Car Or Not.
- Harden Steel More Durable And Cool,Makes My Car Go 10 Mph Faster,Holding Up Well
- Will Fit 1/5 Traxxas X-Maxx 1/7 Traxxas Xo-1 1/10 Traxxas E-Revo 2.0 Maxx 1/6 Traxxas Xrt Super Gear 46T Upgrade Parts
- Package Include: 2pcs Harden Steel 46T Main Spur Gear
- See more on Amazon...
Brand: ADORLY | Manufacturer: ADORLY
See On Amazon #16
Hot Racing ERVT46M01 46t Mod 1 Steel Spur Gear E Revo 2 XO-1
Asin: B07HXDTD34 | Model: ERVT46M01 | PartNumber: ERVT46M01 | Ean: 0083745293197 | UPC: 083745293197
Reliable Gear Mesh Setting: Unlike Other Gears, This One Doesn't Rely On A Pin System For Gear Mesh Adjustment. Instead, It Allows For Manual Gear Mesh Setting, Providing Greater Control And Precision..
Optimal Dimensions: With An Overall Diameter Of 48.7Mm And A Gear Face Width Of 8Mm, This Gear Is Designed To Perfectly Fit Your Tra E Revo2 And Provide Improved Performance During Your Hobby Activities..
Easy Installation: Simply Loosen The Four 4X16mm Button-Head Cap Screws On The Bottom, Insert A Strip Of Paper To Set The Gear Mesh, Tighten The Screws, And Remove The Strip. Enjoy Smooth Operation Without Any Binding..
Increased Lifespan: Designed With A Black Oxide Finish, This Gear Is Resistant To Wear And Corrosion, Ensuring Long-Lasting Performance And Protecting Your Investment..
Features
- Exceptional durability: Constructed with CNC machined hardened steel, this spur gear provides added strength and protection for your TRA E Revo2, 6S and 8S, Mxx 4S, XO-1, and XRT vehicles.
- Increased lifespan: Designed with a black oxide finish, this gear is resistant to wear and corrosion, ensuring long-lasting performance and protecting your investment.
- Reliable gear mesh setting: Unlike other gears, this one doesn't rely on a pin system for gear mesh adjustment. Instead, it allows for manual gear mesh setting, providing greater control and precision.
- Easy installation: Simply loosen the four 4x16mm button-head cap screws on the bottom, insert a strip of paper to set the gear mesh, tighten the screws, and remove the strip. Enjoy smooth operation without any binding.
- Optimal dimensions: With an overall diameter of 48.7mm and a gear face width of 8mm, this gear is designed to perfectly fit your TRA E Revo2 and provide improved performance during your hobby activities.
- See more on Amazon...
Brand: Hot Racing | Manufacturer: Hot Racing
Dimensions: 0.13 x 2.13 x 2.50 inches | Weight: 0.08 pounds
See On Amazon #17
ARRMA Spur Gear 39T, ARA311051
Asin: B08MCH812T | Model: ARA311051 | PartNumber: ARA311051 | Ean: 5052127038508
First Available: 06/19/2020
Brand: ARRMA | Manufacturer: ARRMA
Dimensions: 0.60 x 4.00 x 2.50 inches | Weight: 0.08 Pounds
See On Amazon #18
ShareGoo Metal 48P Spur Gear 80T Compatible with Sakura D3 CS S XI XIS 1/10 Drift RC Racing Car
Asin: B07N11SDPB | Model: HS826B | PartNumber: HS826B | Ean: 0763846885810 | UPC: 763846885810
Material: 7075 Aluminum Alloy.Durable Than The Plastic Gear..
Please Attention, Because Of The Motor Gear And This Spur Gear Are Metal, Suggest To Add Lubricating Oil, Not Only To Reduce The Friction Between The Metal Gear, But Also The Sound Will Be A Little Bit Small..
Outer Diameter: 43Mm;Thickess: 4.5Mm / 0.17Inch.
Suitable For Most 1:10 On-Road Belt Drive Car, Also Can Use On Some Shaft Drive Car, For Example,Compatible With Sakura S Xis Cs D3 Xi R31 G31 Mst...Etc..
Features
- This is metal 48P spur gear 80T, upgrade part and compatible with Sakura on-road car.
- Suitable for most 1:10 on-road belt drive car, also can use on some shaft drive car, for example,compatible with Sakura S XIS CS D3 XI R31 G31 MST...etc.
- Material: 7075 aluminum alloy.Durable than the plastic gear.
- Outer diameter: 43mm;Thickess: 4.5mm / 0.17inch
- Please attention, because of the motor gear and this spur gear are metal, suggest to add lubricating oil, not only to reduce the friction between the metal gear, but also the sound will be a little bit small.
- See more on Amazon...
Brand: Share Goo | Manufacturer: ShareGoo
See On Amazon #19
Kimbrough 142 96 Tooth Spur Gear 48 Pitch
Asin: B0006O1QTO | Model: KIM142 | PartNumber: KIM142 | Ean: 0610960001421 | UPC: 610960001421
The Tooth Shapes Of Kimbrough Racing Products Gears Are Cut With State Of The Art, Wire Electronic Discharge Machines (Edm)..
Gears Are Molded From 4/6 Nylon. This Plastic Is Almost Three Times Tougher And Will Withstand Operating Temperatures 75° To 125° Higher Than Plastics Used By Other R/C Car Gear Manufacturers.
Features
- Kimbrough racing products gears are full width. We do not make narrow or profiled gears because plastic can deform under load.
- Gears are molded from 4/6 nylon. This plastic is almost three times tougher and will withstand operating temperatures 75 to 125 higher than plastics used by other R/C car gear Manufacturers
- The tooth shapes of Kimbrough racing products gears are cut with state of the art, wire electronic Discharge machines (EDM).
- See more on Amazon...
First Available: 01/01/2019
Brand: Kimbrough | Manufacturer: Kimbrough
Dimensions: 0.25 x 2.50 x 3.00 inches | Weight: 0.02 pounds
See On Amazon
Looking For Something Else?
Search